Add gpio26 as "force enter bootloader" gpio

components/bootloader/subproject/main/bootloader_start.c

@@ -17,12 +17,19 @@
 
 #include "esp_log.h"
 #include "rom/gpio.h"
+#include "soc/gpio_reg.h"
 #include "bootloader_config.h"
 #include "bootloader_init.h"
 #include "bootloader_utility.h"
 #include "bootloader_common.h"
 #include "sdkconfig.h"
 #include "esp_image_format.h"
+#include "soc/rtc_io_reg.h"
+#include "soc/io_mux_reg.h"
+
+
+#define GPIO_PIN_REG_26         IO_MUX_GPIO26_REG
+#define BOOT_GPIO26             CONFIG_ESP_BOOT_GPIO26
 
 static const char* TAG = "boot";
 
@@ -40,6 +47,24 @@ void call_start_cpu0()
         return;
     }
 
+#if BOOT_GPIO26
+    // SET GPIO26 as input
+    // REG_CLR_BIT(GPIO_ENABLE_REG, BIT26);
+    // rtc_gpio_deinit(GPIO_NUM_26);
+    CLEAR_PERI_REG_MASK(RTC_IO_TOUCH_PAD3_REG, RTC_IO_TOUCH_PAD3_MUX_SEL_M);
+
+    //gpio_pad_select_gpio(GPIO_NUM_26);
+    PIN_FUNC_SELECT(GPIO_PIN_REG_26, PIN_FUNC_GPIO);
+  
+    //gpio_set_direction(GPIO_NUM_26, GPIO_MODE_INPUT);
+    PIN_INPUT_ENABLE(GPIO_PIN_REG_26);
+    REG_WRITE(GPIO_ENABLE_W1TC_REG, BIT26);
+  
+    //gpio_set_pull_mode(GPIO_NUM_26, GPIO_PULLUP_ONLY);
+    REG_CLR_BIT(GPIO_PIN_REG_26, FUN_PD);
+    REG_SET_BIT(GPIO_PIN_REG_26, FUN_PU);
+#endif
+
     // 2. Select image to boot
     esp_image_metadata_t image_data;
     if(select_image(&image_data) != ESP_OK){
@@ -83,11 +108,14 @@ static int selected_boot_partition(const bootloader_state_t *bs)
     if (boot_index == INVALID_INDEX) {
         return boot_index; // Unrecoverable failure (not due to corrupt ota data or bad partition contents)
     } else {
+#if BOOT_GPIO26
         // Check for reset to the factory firmware or for launch OTA[x] firmware.
         // Customer implementation.
-        // if (gpio_pin_1 == true && ...){
-        //     boot_index = required_boot_partition;
-        // } ...
+        if ( REG_GET_BIT(GPIO_IN_REG, BIT26) == BIT26) {
+				ESP_LOGE(TAG, "GPIO 26 PRESSED: Booting on FACTORY_INDEX\n");
+            boot_index = FACTORY_INDEX;
+        } 
+#endif
     } 
     return boot_index;
 }

main/Kconfig.projbuild

 menu "Nexboot Configuration"
  
+config ESP_BOOT_GPIO26
+   bool "Enable GPIO26 force bootloader"
+   default y
+   help
+      Whether or not GPIO26 is enabled during boot to force bootloader mode
+
 choice ESP_WIFI_MODE
     prompt "AP or STA"
     default ESP_WIFI_IS_STATION

main/nexboot.c

@@ -209,6 +209,8 @@ static void mg_ev_handler(struct mg_connection *nc, int ev, void *p) {
       data->bytes_written += mp->data.len;
       ESP_LOGI(TAG, "MG_EV_HTTP_PART_DATA %p len %d\n", nc, mp->data.len);
       ESP_ERROR_CHECK(esp_ota_write( data->update_handle, (void *)mp->data.p, mp->data.len));
+
+
       break;
     } 
     case MG_EV_HTTP_PART_END: {
@@ -221,6 +223,10 @@ static void mg_ev_handler(struct mg_connection *nc, int ev, void *p) {
       nc->flags |= MG_F_SEND_AND_CLOSE;
       free(data);
       nc->user_data = NULL;
+      ESP_ERROR_CHECK(esp_ota_end(data->update_handle));
+      ESP_ERROR_CHECK(esp_ota_set_boot_partition(data->update_partition));
+      ESP_LOGI(TAG,"Booting update... ");
+      esp_restart();
       break;
     }
     case MG_EV_CLOSE: {