Update 4.2.0

MarlinKimbra/Boards.h

@@ -27,6 +27,7 @@
 #define BOARD_RADDS             402  // RADDS ARM 32
 #define BOARD_RAMPS_FDV1        403  // RAMPS-FD V1 ARM 32
 #define BOARD_RAMPS_FDV2        404  // RAMPS-FD V2 ARM 32
+#define BOARD_SMART_RAMPS       408  // SMART RAMPS ARM 32
 #define BOARD_RAMPS4DUE         433  // RAMPS4DUE with AndrewBCN's RAMPS mods (http://forums.reprap.org/read.php?219,479626,page=1) ARM 32
 
 #define BOARD_GEN6              5    // Gen6

MarlinKimbra/Configuration_Basic.h

@@ -6,9 +6,9 @@
  * - Serial comunication type
  * - Board type
  * - Mechanism type
+ * - Extruders number
  * - Thermistor type
  * - Temperature limits
- * - Extruders number
  * - UI Language
  *
  * Mechanisms-settings can be found in Configuration_Xxxxxx.h (where Xxxxxx can be: Cartesian - Delta - Core - Scara)
@@ -89,8 +89,19 @@
 /*************************************************************************************/
 
 
+/***********************************************************************
+ ************************** Extruders number ***************************
+ ***********************************************************************/
+// This defines the number of extruder real or virtual
+#define EXTRUDERS 1
+
+// This defines the number of Driver extruder you have and use
+#define DRIVER_EXTRUDERS 1
+/***********************************************************************/
+
+
 /*****************************************************************************************************
- ************************************ Thermistor type *************************************
+ ************************************** Thermistor type **********************************************
  *****************************************************************************************************
  *                                                                                                   *
  * 4.7kohm PULLUP!                                                                                   *
@@ -197,17 +208,6 @@
 /*****************************************************************************************************/
 
 
-/***********************************************************************
- ************************** Extruders number ***************************
- ***********************************************************************/
-// This defines the number of extruder real or virtual
-#define EXTRUDERS 1
-
-// This defines the number of Driver extruder you have and use
-#define DRIVER_EXTRUDERS 1
-/***********************************************************************/
-
-
 /***********************************************************************
  *************************** UI Language  ******************************
  ***********************************************************************

MarlinKimbra/Configuration_Delta.h

@@ -63,7 +63,7 @@
 #define DELTA_CARRIAGE_OFFSET 20.0          // mm
 
 // Bed Printer radius
-#define PRINTER_RADIUS 75                   // mm
+#define BED_PRINTER_RADIUS 75               // mm
 
 //Endstop Offset Adjustment - All values are in mm and must be negative (to move down away from endstop switches) 
 #define TOWER_A_ENDSTOP_ADJ 0 // Front Left Tower
@@ -269,10 +269,10 @@
  * Travel limits after homing (units are in mm)                                          *
  *                                                                                       *
  *****************************************************************************************/
-#define X_MAX_POS PRINTER_RADIUS
-#define X_MIN_POS -PRINTER_RADIUS
-#define Y_MAX_POS PRINTER_RADIUS
-#define Y_MIN_POS -PRINTER_RADIUS
+#define X_MAX_POS BED_PRINTER_RADIUS
+#define X_MIN_POS -BED_PRINTER_RADIUS
+#define Y_MAX_POS BED_PRINTER_RADIUS
+#define Y_MIN_POS -BED_PRINTER_RADIUS
 #define Z_MAX_POS MANUAL_Z_HOME_POS
 #define Z_MIN_POS 0
 #define E_MIN_POS 0

MarlinKimbra/comunication.h

@@ -37,7 +37,7 @@
 #define ER          "error: "             // error for host
 #define WT          "wait"                // wait for host
 #define DB          "echo: "              // message for user
-#define RS          "Resend: "            // resend for host
+#define RS          "resend: "            // resend for host
 #define PAUSE       "//action:pause"      // command for host that support action
 #define RESUME      "//action:resume"     // command for host that support action
 #define DISCONNECT  "//action:disconnect" // command for host that support action

MarlinKimbra/pins.h

@@ -27,6 +27,7 @@
 *401 BOARD_RADDS       - Radds Arduino DUE
 *403 BOARD_RAMPS_FD_V1 - Ramps FD version 1 Arduino DUE
 *404 BOARD_RAMPS_FD_V2 - Ramps FD version 2 Arduino DUE
+*408 BOARD_SMART_RAMPS - Smart Ramps for Arduino DUE
 *433 BOARD_RAMPS4DUE   - Ramps for Arduino DUE
 *
 *  5 BOARD_GEN6 - Gen6
@@ -2309,13 +2310,69 @@
 
 
 
+/****************************************************************************************
+* 408
+* Arduino Due pin assignment
+* for SMART_RAMPS
+****************************************************************************************/
+#if MB(SMART_RAMPS)
+#define KNOWN_BOARD
+
+#ifndef __SAM3X8E__
+  #error Oops!  Make sure you have 'Arduino Due' selected from the 'Tools -> Boards' menu.
+#endif
+
+#define ORIG_X_STEP_PIN     54
+#define ORIG_X_DIR_PIN      55
+#define ORIG_X_MIN_PIN      3
+#define ORIG_X_MAX_PIN      2
+#define ORIG_X_ENABLE_PIN   38
+
+#define ORIG_Y_STEP_PIN     60  
+#define ORIG_Y_DIR_PIN      61
+#define ORIG_Y_MIN_PIN      14
+#define ORIG_Y_MAX_PIN      15
+#define ORIG_Y_ENABLE_PIN   56
+
+#define ORIG_Z_STEP_PIN     46
+#define ORIG_Z_DIR_PIN      48
+#define ORIG_Z_MIN_PIN      18
+#define ORIG_Z_MAX_PIN      19
+#define ORIG_Z_ENABLE_PIN   62
+
+// Note that on the Due pin A0 on the board is channel 2 on the ARM chip
+#define ORIG_HEATER_0_PIN   10
+#define ORIG_TEMP_0_PIN     11  // Due analog pin #
+#define ORIG_HEATER_1_PIN   8
+#define ORIG_TEMP_1_PIN     12  // Due analog pin #
+#define ORIG_HEATER_BED_PIN 9
+#define ORIG_TEMP_BED_PIN   13  // Due analog pin #
+
+#define ORIG_E0_STEP_PIN    26
+#define ORIG_E0_DIR_PIN     28
+#define ORIG_E0_ENABLE_PIN  24
+
+#define ORIG_E1_STEP_PIN    36
+#define ORIG_E1_DIR_PIN     34
+#define ORIG_E1_ENABLE_PIN  30
+
+#define SDPOWER             -1
+#define SDSS                53  // 10 if using HW SPI. 53 if using SW SPI
+#define LED_PIN             13
+#define ORIG_FAN_PIN        9
+#define PS_ON_PIN           12
+#define KILL_PIN            -1
+#define SUICIDE_PIN         -1  // PIN that has to be turned on right after start, to keep power flowing
+/****************************************************************************************/
+
+
 /****************************************************************************************
 * 433
 * Arduino Due pin assignment
 * for RAMPS4DUE (http://forums.reprap.org/read.php?219,479626,page=1)
 ****************************************************************************************/
 #if MB(RAMPS4DUE)
-#define KNOWN_BOARD 1
+#define KNOWN_BOARD
 
 #ifndef __SAM3X8E__
   #error Oops!  Make sure you have 'Arduino Due' selected from the 'Tools -> Boards' menu.