Fix pins.h

MarlinKimbra/pins.h

@@ -2315,50 +2315,47 @@
   #error Oops!  Make sure you have 'Arduino Due' selected from the 'Tools -> Boards' menu.
 #endif
 
-#define ORIG_X_STEP_PIN     54
-#define ORIG_X_DIR_PIN      55
-#define ORIG_X_ENABLE_PIN   38
-#define ORIG_X_MIN_PIN           3
-#define ORIG_X_MAX_PIN           2
-
-
-#define ORIG_Y_STEP_PIN     60  
-#define ORIG_Y_DIR_PIN      61
-#define ORIG_Y_ENABLE_PIN   56
-#define ORIG_Y_MIN_PIN           14
-#define ORIG_Y_MAX_PIN           15
-
+#define ORIG_X_STEP_PIN       54
+#define ORIG_X_DIR_PIN        55
+#define ORIG_X_ENABLE_PIN     38
+#define ORIG_X_MIN_PIN         3
+#define ORIG_X_MAX_PIN         2
+
+#define ORIG_Y_STEP_PIN       60
+#define ORIG_Y_DIR_PIN        61
+#define ORIG_Y_ENABLE_PIN     56
+#define ORIG_Y_MIN_PIN        14
+#define ORIG_Y_MAX_PIN        15
+
+#define ORIG_Z_STEP_PIN       46
+#define ORIG_Z_DIR_PIN        48
+#define ORIG_Z_ENABLE_PIN     62
+#define ORIG_Z_MIN_PIN        18
+#define ORIG_Z_MAX_PIN        19
+
+#define ORIG_HEATER_0_PIN     10
+#define ORIG_HEATER_1_PIN      9
+#define ORIG_HEATER_BED_PIN    8
+
+#define ORIG_TEMP_0_PIN        9  // Due analog pin #
+#define ORIG_TEMP_1_PIN        8  // Due analog pin #
+#define ORIG_TEMP_BED_PIN     10  // Due analog pin #
+
+#define ORIG_E0_STEP_PIN      26
+#define ORIG_E0_DIR_PIN       28
+#define ORIG_E0_ENABLE_PIN    24
+
+#define ORIG_E1_STEP_PIN      36
+#define ORIG_E1_DIR_PIN       34
+#define ORIG_E1_ENABLE_PIN    30
 
-#define ORIG_Z_STEP_PIN     46
-#define ORIG_Z_DIR_PIN      48
-#define ORIG_Z_ENABLE_PIN   62
-#define ORIG_Z_MIN_PIN           18
-#define ORIG_Z_MAX_PIN           19
-
-
-// Note that on the Due pin A0 on the board is channel 2 on the ARM chip
-#define ORIG_HEATER_0_PIN   10
-#define ORIG_TEMP_0_PIN     11  // Due analog pin #
-#define ORIG_HEATER_BED_PIN 8
-#define ORIG_TEMP_BED_PIN   12  // Due analog pin #
-#define ORIG_HEATER_1_PIN   9
-#define ORIG_TEMP_1_PIN     13  // Due analog pin #
-
-#define ORIG_E0_STEP_PIN    26
-#define ORIG_E0_DIR_PIN     28
-#define ORIG_E0_ENABLE_PIN  24
-
-#define ORIG_E1_STEP_PIN    36
-#define ORIG_E1_DIR_PIN     34
-#define ORIG_E1_ENABLE_PIN  30
-
-#define SDPOWER             -1
-#define SDSS                53  // 10 if using HW SPI. 53 if using SW SPI
-#define LED_PIN             13
-#define ORIG_FAN_PIN        9
-#define PS_ON_PIN           12
-#define KILL_PIN            -1
-#define SUICIDE_PIN         -1  // PIN that has to be turned on right after start, to keep power flowing
+#define SDPOWER               -1
+#define SDSS                  53  // 10 if using HW SPI. 53 if using SW SPI
+#define LED_PIN               13
+#define ORIG_FAN_PIN           9
+#define PS_ON_PIN             12
+#define KILL_PIN              -1
+#define SUICIDE_PIN           -1  // PIN that has to be turned on right after start, to keep power flowing
 
 #endif
 /****************************************************************************************/