Skip to content

M
MarlinKimbra
Commit eabec724 authored by Franco (nextime) Lanza's avatar Franco (nextime) Lanza
Browse files
Options

Fix example configs

parent e5d046c6
Pipeline #90 skipped
Hide whitespace changes
Inline Side-by-side
Showing with 136 additions and 48 deletions
Documentation/Laser/K40_ramps_configs/K40_no_cooler_no_flowmeter/Configuration_Cartesian.h
View file @ eabec724
......@@ -8,14 +8,15 @@
* - Endstop pullup resistors
* - Endstops logic
* - Endstops min or max
* - Min Z height for homing
* - Stepper enable logic
* - Stepper step logic
* - Stepper direction
* - Disables axis
* - Travel limits
* - Axis relative mode
* - MBL or ABL
* - Auto bed levelling
* - Mesh Bed Leveling (MBL)
* - Auto Bed Leveling (ABL)
* - Z probe endstop
* - Safe Z homing
* - Manual home positions
......@@ -27,6 +28,7 @@
* - Cartesian Correction
*
* Basic-settings can be found in Configuration_Basic.h
* Temperature-settings can be found in Configuration_Temperature.h
* Feature-settings can be found in Configuration_Feature.h
* Pins-settings can be found in "Configuration_Pins.h"
*/
......@@ -104,6 +106,18 @@
/*****************************************************************************************/
/*****************************************************************************************
***************************** MIN Z HEIGHT FOR HOMING **********************************
*****************************************************************************************
* *
* (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, *
* Be sure you have this distance over your Z_MAX_POS in case. *
* *
*****************************************************************************************/
#define MIN_Z_HEIGHT_FOR_HOMING 0
/*****************************************************************************************/
/*****************************************************************************************
********************************* Stepper enable logic **********************************
*****************************************************************************************
......@@ -216,24 +230,27 @@
/*****************************************************************************************
************************************** MBL or ABL ***************************************
*****************************************************************************************
* *
* Manual Bed Leveling (MBL) or Auto Bed Leveling (ABL) settings *
* Set the rectangle in which to probe in MBL or ABL. *
* *
******************************* Mesh Bed Leveling ***************************************
*****************************************************************************************/
#define LEFT_PROBE_BED_POSITION 20
#define RIGHT_PROBE_BED_POSITION 180
#define FRONT_PROBE_BED_POSITION 20
#define BACK_PROBE_BED_POSITION 180
//#define MESH_BED_LEVELING
#define XY_TRAVEL_SPEED 10000 // X and Y axis travel speed between probes, in mm/min
#define MESH_INSET 10 // Mesh inset margin on print area
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited.
#define MESH_NUM_Y_POINTS 3
#define MESH_HOME_SEARCH_Z 5 // Z after Home, bed somewhere below but above 0.0.
// After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
//#define MESH_G28_REST_ORIGIN
// Add display menu option for bed leveling.
//#define MANUAL_BED_LEVELING
// Step size while manually probing Z axis.
#define MBL_Z_STEP 0.025
/*****************************************************************************************/
/*****************************************************************************************
******************************* Auto bed levelling **************************************
******************************* Auto Bed Leveling ***************************************
*****************************************************************************************
* *
* There are 2 different ways to specify probing locations *
......@@ -248,7 +265,7 @@
* You specify the XY coordinates of all 3 points. *
* *
* *
* Uncomment AUTO_BED_LEVELING_FEATURE to enable *
* Uncomment AUTO BED LEVELING FEATURE to enable *
* *
*****************************************************************************************/
//#define AUTO_BED_LEVELING_FEATURE
......@@ -258,14 +275,22 @@
// Note: this feature generates 10KB extra code size
#define AUTO_BED_LEVELING_GRID
// yes AUTO_BED_LEVELING_GRID
#define MIN_PROBE_EDGE 10 // The probe square sides can be no smaller than this
// START yes AUTO BED LEVELING GRID
#define LEFT_PROBE_BED_POSITION 20
#define RIGHT_PROBE_BED_POSITION 180
#define FRONT_PROBE_BED_POSITION 20
#define BACK_PROBE_BED_POSITION 180
// The probe square sides can be no smaller than this
#define MIN_PROBE_EDGE 10
// Set the number of grid points per dimension
// You probably don't need more than 3 (squared=9)
#define AUTO_BED_LEVELING_GRID_POINTS 2
// yes AUTO_BED_LEVELING_GRID
// END yes AUTO BED LEVELING GRID
// no AUTO_BED_LEVELING_GRID
// START no AUTO BED LEVELING GRID
// Arbitrary points to probe. A simple cross-product
// is used to estimate the plane of the bed.
#define ABL_PROBE_PT_1_X 15
......@@ -274,7 +299,7 @@
#define ABL_PROBE_PT_2_Y 15
#define ABL_PROBE_PT_3_X 180
#define ABL_PROBE_PT_3_Y 15
// no AUTO_BED_LEVELING_GRID
// END no AUTO BED LEVELING GRID
// Offsets to the probe relative to the extruder tip (Hotend - Probe)
// X and Y offsets MUST be INTEGERS
......@@ -288,12 +313,12 @@
// | P (-) | T <-- probe (-10,-10)
// | |
// O-- FRONT --+
// (0,0)
#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left [of the nozzle] +right
#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front [of the nozzle] +behind
#define Z_PROBE_OFFSET_FROM_EXTRUDER -1 // Z offset: -below [of the nozzle] (always negative!)
#define Z_RAISE_BEFORE_HOMING 10 // (in mm) Raise Z before homing (G28) for Probe Clearance.
// Be sure you have this distance over your Z_MAX_POS in case
#define XY_TRAVEL_SPEED 10000 // X and Y axis travel speed between probes, in mm/min
#define Z_RAISE_BEFORE_PROBING 10 //How much the extruder will be raised before travelling to the first probing point.
#define Z_RAISE_BETWEEN_PROBINGS 5 //How much the extruder will be raised when travelling from between next probing points
......
Documentation/Laser/K40_ramps_configs/K40_no_cooler_no_flowmeter/Configuration_Feature.h
View file @ eabec724
......@@ -23,6 +23,7 @@
* - Software endstops
* - Endstops only for homing
* - Abort on endstop hit feature
* - Mesh Level Area
* - R/C Servo
* - Late Z axis
* - Ahead slowdown
......@@ -437,6 +438,23 @@
**************************************************************************/
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
#define ABORT_ON_ENDSTOP_HIT_INIT true
/**************************************************************************/
/**************************************************************************
*************************** Mesh Level Area ******************************
**************************************************************************
* *
* Default mesh area is an area with an inset margin on the print area. *
* Below are the macros that are used to define the borders for the mesh *
* area, made available here for specialized needs. *
* *
**************************************************************************/
#define MESH_MIN_X (X_MIN_POS + MESH_INSET)
#define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
#define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
#define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
/**************************************************************************/
/**************************************************************************
......@@ -1195,9 +1213,9 @@
************************** Motor's current ****************************
***********************************************************************/
// Motor Current setting (Only functional on ALLIGATOR BOARD)
#define MOTOR_CURRENT {1, 1, 1, 1, 1, 1, 1} // X Y Z E0 E1 E2 E3 - Values 0 - 2.5 A
#define MOTOR_CURRENT {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // X Y Z E0 E1 E2 E3 - Values 0 - 2.5 A
// Motor Current setting (Only functional when motor driver current ref pins are connected to a digital trimpot on supported boards)
#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
#define DIGIPOT_MOTOR_CURRENT {135, 135, 135, 135, 135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
/***********************************************************************/
......
Documentation/Laser/K40_ramps_configs/K40_no_cooler_no_flowmeter/Configuration_Pins.h
View file @ eabec724
......@@ -114,6 +114,7 @@
#elif LASER_CONTROL == 2
#define LASER_PWR_PIN 6
#define LASER_TTL_PIN 5
#endif
#if ENABLED(LASER_PERIPHERALS)
#define LASER_PERIPHERALS_PIN 11
#define LASER_PERIPHERALS_STATUS_PIN 14
......
Documentation/Laser/K40_ramps_configs/K40_with_cooler_and_flowmeter/Configuration_Cartesian.h
View file @ eabec724
......@@ -8,14 +8,15 @@
* - Endstop pullup resistors
* - Endstops logic
* - Endstops min or max
* - Min Z height for homing
* - Stepper enable logic
* - Stepper step logic
* - Stepper direction
* - Disables axis
* - Travel limits
* - Axis relative mode
* - MBL or ABL
* - Auto bed levelling
* - Mesh Bed Leveling (MBL)
* - Auto Bed Leveling (ABL)
* - Z probe endstop
* - Safe Z homing
* - Manual home positions
......@@ -27,6 +28,7 @@
* - Cartesian Correction
*
* Basic-settings can be found in Configuration_Basic.h
* Temperature-settings can be found in Configuration_Temperature.h
* Feature-settings can be found in Configuration_Feature.h
* Pins-settings can be found in "Configuration_Pins.h"
*/
......@@ -104,6 +106,18 @@
/*****************************************************************************************/
/*****************************************************************************************
***************************** MIN Z HEIGHT FOR HOMING **********************************
*****************************************************************************************
* *
* (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, *
* Be sure you have this distance over your Z_MAX_POS in case. *
* *
*****************************************************************************************/
#define MIN_Z_HEIGHT_FOR_HOMING 0
/*****************************************************************************************/
/*****************************************************************************************
********************************* Stepper enable logic **********************************
*****************************************************************************************
......@@ -216,24 +230,27 @@
/*****************************************************************************************
************************************** MBL or ABL ***************************************
*****************************************************************************************
* *
* Manual Bed Leveling (MBL) or Auto Bed Leveling (ABL) settings *
* Set the rectangle in which to probe in MBL or ABL. *
* *
******************************* Mesh Bed Leveling ***************************************
*****************************************************************************************/
#define LEFT_PROBE_BED_POSITION 20
#define RIGHT_PROBE_BED_POSITION 180
#define FRONT_PROBE_BED_POSITION 20
#define BACK_PROBE_BED_POSITION 180
//#define MESH_BED_LEVELING
#define XY_TRAVEL_SPEED 10000 // X and Y axis travel speed between probes, in mm/min
#define MESH_INSET 10 // Mesh inset margin on print area
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited.
#define MESH_NUM_Y_POINTS 3
#define MESH_HOME_SEARCH_Z 5 // Z after Home, bed somewhere below but above 0.0.
// After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
//#define MESH_G28_REST_ORIGIN
// Add display menu option for bed leveling.
//#define MANUAL_BED_LEVELING
// Step size while manually probing Z axis.
#define MBL_Z_STEP 0.025
/*****************************************************************************************/
/*****************************************************************************************
******************************* Auto bed levelling **************************************
******************************* Auto Bed Leveling ***************************************
*****************************************************************************************
* *
* There are 2 different ways to specify probing locations *
......@@ -248,7 +265,7 @@
* You specify the XY coordinates of all 3 points. *
* *
* *
* Uncomment AUTO_BED_LEVELING_FEATURE to enable *
* Uncomment AUTO BED LEVELING FEATURE to enable *
* *
*****************************************************************************************/
//#define AUTO_BED_LEVELING_FEATURE
......@@ -258,14 +275,22 @@
// Note: this feature generates 10KB extra code size
#define AUTO_BED_LEVELING_GRID
// yes AUTO_BED_LEVELING_GRID
#define MIN_PROBE_EDGE 10 // The probe square sides can be no smaller than this
// START yes AUTO BED LEVELING GRID
#define LEFT_PROBE_BED_POSITION 20
#define RIGHT_PROBE_BED_POSITION 180
#define FRONT_PROBE_BED_POSITION 20
#define BACK_PROBE_BED_POSITION 180
// The probe square sides can be no smaller than this
#define MIN_PROBE_EDGE 10
// Set the number of grid points per dimension
// You probably don't need more than 3 (squared=9)
#define AUTO_BED_LEVELING_GRID_POINTS 2
// yes AUTO_BED_LEVELING_GRID
// END yes AUTO BED LEVELING GRID
// no AUTO_BED_LEVELING_GRID
// START no AUTO BED LEVELING GRID
// Arbitrary points to probe. A simple cross-product
// is used to estimate the plane of the bed.
#define ABL_PROBE_PT_1_X 15
......@@ -274,7 +299,7 @@
#define ABL_PROBE_PT_2_Y 15
#define ABL_PROBE_PT_3_X 180
#define ABL_PROBE_PT_3_Y 15
// no AUTO_BED_LEVELING_GRID
// END no AUTO BED LEVELING GRID
// Offsets to the probe relative to the extruder tip (Hotend - Probe)
// X and Y offsets MUST be INTEGERS
......@@ -288,12 +313,12 @@
// | P (-) | T <-- probe (-10,-10)
// | |
// O-- FRONT --+
// (0,0)
#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left [of the nozzle] +right
#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front [of the nozzle] +behind
#define Z_PROBE_OFFSET_FROM_EXTRUDER -1 // Z offset: -below [of the nozzle] (always negative!)
#define Z_RAISE_BEFORE_HOMING 10 // (in mm) Raise Z before homing (G28) for Probe Clearance.
// Be sure you have this distance over your Z_MAX_POS in case
#define XY_TRAVEL_SPEED 10000 // X and Y axis travel speed between probes, in mm/min
#define Z_RAISE_BEFORE_PROBING 10 //How much the extruder will be raised before travelling to the first probing point.
#define Z_RAISE_BETWEEN_PROBINGS 5 //How much the extruder will be raised when travelling from between next probing points
......
Documentation/Laser/K40_ramps_configs/K40_with_cooler_and_flowmeter/Configuration_Feature.h
View file @ eabec724
......@@ -23,6 +23,7 @@
* - Software endstops
* - Endstops only for homing
* - Abort on endstop hit feature
* - Mesh Level Area
* - R/C Servo
* - Late Z axis
* - Ahead slowdown
......@@ -437,6 +438,23 @@
**************************************************************************/
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
#define ABORT_ON_ENDSTOP_HIT_INIT true
/**************************************************************************/
/**************************************************************************
*************************** Mesh Level Area ******************************
**************************************************************************
* *
* Default mesh area is an area with an inset margin on the print area. *
* Below are the macros that are used to define the borders for the mesh *
* area, made available here for specialized needs. *
* *
**************************************************************************/
#define MESH_MIN_X (X_MIN_POS + MESH_INSET)
#define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
#define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
#define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
/**************************************************************************/
/**************************************************************************
......@@ -1195,9 +1213,9 @@
************************** Motor's current ****************************
***********************************************************************/
// Motor Current setting (Only functional on ALLIGATOR BOARD)
#define MOTOR_CURRENT {1, 1, 1, 1, 1, 1, 1} // X Y Z E0 E1 E2 E3 - Values 0 - 2.5 A
#define MOTOR_CURRENT {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // X Y Z E0 E1 E2 E3 - Values 0 - 2.5 A
// Motor Current setting (Only functional when motor driver current ref pins are connected to a digital trimpot on supported boards)
#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
#define DIGIPOT_MOTOR_CURRENT {135, 135, 135, 135, 135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
/***********************************************************************/
......
Documentation/Laser/K40_ramps_configs/K40_with_cooler_and_flowmeter/Configuration_Pins.h
View file @ eabec724
......@@ -114,6 +114,7 @@
#elif LASER_CONTROL == 2
#define LASER_PWR_PIN 6
#define LASER_TTL_PIN 5
#endif
#if ENABLED(LASER_PERIPHERALS)
#define LASER_PERIPHERALS_PIN 11
#define LASER_PERIPHERALS_STATUS_PIN 14
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment