Merge pull request #65 from simonepri/master

Update 4.1.5 dev

Documentation/changelog.md

 ### Version 4.1.5
+* Added dot for SD write operation
+* Added statistics menu
+* Added an overall configuration file
 * Added M70 gcode for calibrate AC721 current sensor
 * Added documentation for calibrate AC721 current sensor
 * Critical stepper motor frequency bugfix

MarlinKimbra/Configuration.h

@@ -4,6 +4,7 @@
 #include "boards.h"
 #include "macros.h"
 #include "Default_Version.h"
+#include "Configuration_Overall.h"
 
 //===========================================================================
 //============================= Getting Started =============================
@@ -61,23 +62,6 @@
 //#define COREXZ
 //#define DELTA
 //#define SCARA
-/***********************************************************************\
-
-/***********************************************************************\
- ********************** Do not touch this section **********************
- ***********************************************************************/
-#if ENABLED(CARTESIAN)
-  #include "Configuration_Cartesian.h"
-#elif ENABLED(COREXY)
-  #include "Configuration_Core.h"
-#elif ENABLED(COREXZ)
-  #include "Configuration_Core.h"
-#elif ENABLED(DELTA)
-  #include "Configuration_Delta.h"
-#elif ENABLED(SCARA)
-  #include "Configuration_Scara.h"
-#endif
-/***********************************************************************/
 
 // This defines the number of extruder real or virtual
 #define EXTRUDERS 1
@@ -720,7 +704,24 @@ const bool FILRUNOUT_PIN_INVERTING = true;  // Should be uncommented and true or
 //#define LASERBEAM
 //===========================================================================
 
-
+/***********************************************************************\
+ ********************** Do not touch this section **********************
+ ***********************************************************************/
+#include "Configuration_Overall.h"
+#if ENABLED(CARTESIAN)
+  #include "Configuration_Cartesian.h"
+#elif ENABLED(COREXY)
+  #include "Configuration_Core.h"
+#elif ENABLED(COREXZ)
+  #include "Configuration_Core.h"
+#elif ENABLED(DELTA)
+  #include "Configuration_Delta.h"
+#elif ENABLED(SCARA)
+  #include "Configuration_Scara.h"
+#endif 
+#include "Configuration_Overall.h"
 #include "Configuration_adv.h"
+#include "Configuration_Overall.h"
 #include "thermistortables.h"
+/***********************************************************************/
 #endif //__CONFIGURATION_H

MarlinKimbra/Configuration_Overall.h

+/**
+ * Configuration_Overall.h
+ * Here you can define all your custom settings and they will overwrite configurations in the main configuration files.
+ */
\ No newline at end of file

MarlinKimbra/Configuration_adv.h

@@ -12,7 +12,7 @@
 #define CONFIGURATION_ADV_H
 
 #include "conditionals.h"
-
+#include "Configuration_Overall.h"
 //===========================================================================
 //=============================Thermal Settings  ============================
 //===========================================================================
@@ -561,7 +561,13 @@ const unsigned int dropsegments = 5; // everything with less than this number of
   
 #endif
 
+#include "Configuration_Overall.h"
+#include "pins.h"
+#include "Configuration_Overall.h"
+#include "language.h"
+#include "Configuration_Overall.h"
 #include "conditionals.h"
+#include "Configuration_Overall.h"
 #include "sanitycheck.h"
 
 #endif //CONFIGURATION_ADV_H

MarlinKimbra/configuration_store.cpp

@@ -854,6 +854,8 @@ void ConfigSD_ResetDefault() {
 
   void ConfigSD_StoreSettings() {
     if(!IS_SD_INSERTED || card.isFileOpen() || card.sdprinting) return;
+    set_sd_dot();
+    delay(500);
     card.setroot(true);
     card.openFile(CFG_SD_FILE, false, true, false);
     char buff[CFG_SD_MAX_VALUE_LEN];
@@ -867,10 +869,14 @@ void ConfigSD_ResetDefault() {
     card.closeFile(false);
     card.setlast();
     config_last_update = millis();
+    delay(500);
+    unset_sd_dot();
   }
 
   void ConfigSD_RetrieveSettings(bool addValue) {
     if(!IS_SD_INSERTED || card.isFileOpen() || card.sdprinting || !card.cardOK) return;
+    set_sd_dot();
+    delay(500);
     char key[CFG_SD_MAX_KEY_LEN], value[CFG_SD_MAX_VALUE_LEN];
     int k_idx;
     int k_len, v_len;
@@ -901,6 +907,8 @@ void ConfigSD_ResetDefault() {
     card.closeFile(false);
     card.setlast();
     config_readed = true;
+    delay(500);
+    unset_sd_dot();
   }
 
   int ConfigSD_KeyIndex(char *key) {    //At the moment a binary search algorithm is used for simplicity, if it will be necessary (Eg. tons of key), an hash search algorithm will be implemented.

MarlinKimbra/language_en.h

@@ -35,6 +35,8 @@
 #define MSG_MBL_6                           " BED leveled!       "
 #define MSG_SET_HOME_OFFSETS                "Set home offsets"
 #define MSG_SET_ORIGIN                      "Set origin"
+#define MSG_ONFOR                           "On x:"
+#define MSG_PWRCONSUMED                     "P.er:"
 #define MSG_PREHEAT_PLA                     "Preheat PLA"
 #define MSG_PREHEAT_PLA_ALL                 "Preheat PLA All"
 #define MSG_PREHEAT_PLA_BEDONLY             "Preheat PLA Bed"
@@ -68,6 +70,7 @@
 #define MSG_FAN_SPEED                       "Fan speed"
 #define MSG_FLOW                            "Flow"
 #define MSG_CONTROL                         "Control"
+#define MSG_STATS                           "Statistics"
 #define MSG_FIX_LOSE_STEPS                  "Fix axis steps"
 #define MSG_MIN                             LCD_STR_THERMOMETER " Min"
 #define MSG_MAX                             LCD_STR_THERMOMETER " Max"

MarlinKimbra/language_it.h

@@ -31,6 +31,8 @@
 #define MSG_MBL_6                           " Piatto livellato!       "
 #define MSG_SET_HOME_OFFSETS                "Setta offset home"
 #define MSG_SET_ORIGIN                      "Imposta Origine"
+#define MSG_ONFOR                           "On x:"
+#define MSG_PWRCONSUMED                     "P.za:"
 #define MSG_PREHEAT_PLA                     "Preriscalda PLA"
 #define MSG_PREHEAT_PLA_ALL                 "Prer. PLA Tutto"
 #define MSG_PREHEAT_PLA_BEDONLY             "Prer. PLA Piatto"
@@ -64,6 +66,7 @@
 #define MSG_FAN_SPEED                       "Ventola"
 #define MSG_FLOW                            "Flusso"
 #define MSG_CONTROL                         "Controllo"
+#define MSG_STATS                           "Statistiche"
 #define MSG_MIN                             LCD_STR_THERMOMETER " Min"
 #define MSG_MAX                             LCD_STR_THERMOMETER " Max"
 #define MSG_FACTOR                          LCD_STR_THERMOMETER " Fact"

MarlinKimbra/sanitycheck.h

@@ -278,6 +278,10 @@
       #error HEATER_0_PIN not defined for this board
     #endif
   #endif
+  
+  #if DISABLED(SDSUPPORT) && ENABLED(SD_SETTINGS)
+    #error You have to enable SDSUPPORT to use SD_SETTINGS
+  #endif
 
   /**
    * Warnings for old configurations

MarlinKimbra/ultralcd.cpp

@@ -67,6 +67,7 @@ static void lcd_status_screen();
   static void lcd_prepare_temperature_menu();
   static void lcd_move_menu();
   static void lcd_control_menu();
+  static void lcd_stats_menu();
   static void lcd_control_temperature_menu();
   static void lcd_control_temperature_preheat_pla_settings_menu();
   static void lcd_control_temperature_preheat_abs_settings_menu();
@@ -448,7 +449,9 @@ static void lcd_main_menu() {
     #endif // DELTA
   }
   MENU_ITEM(submenu, MSG_CONTROL, lcd_control_menu);
-
+  
+  MENU_ITEM(submenu, MSG_STATS, lcd_stats_menu);
+  
   #if ENABLED(SDSUPPORT)
     if (card.cardOK) {
       if (card.isFileOpen()) {
@@ -1045,6 +1048,24 @@ static void lcd_control_menu() {
   END_MENU();
 }
 
+/**
+ *
+ * "Statistics" submenu
+ *
+ */
+
+static void lcd_stats_menu() {
+  char row[30];
+  int day = printer_usage_seconds / 60 / 60 / 24, hours = (printer_usage_seconds / 60 / 60) % 24, minutes = (printer_usage_seconds / 60) % 60;
+  sprintf_P(row, PSTR(MSG_ONFOR " %id %ih %im"), day, hours, minutes);
+  LCD_Printpos(0, 0); lcd_print(row);
+  #if HAS_POWER_CONSUMPTION_SENSOR
+    sprintf_P(row, PSTR(MSG_PWRCONSUMED " %iWh"), power_consumption_hour);
+    LCD_Printpos(0, 1); lcd_print(row);
+  #endif
+  if (LCD_CLICKED) lcd_goto_menu(lcd_main_menu);
+}
+
 /**
  *
  * "Temperature" submenu
@@ -1663,6 +1684,27 @@ int lcd_strlen_P(const char *s) {
   return j;
 }
 
+#if ENABLED(SDSUPPORT) && ENABLED(SD_SETTINGS)
+  void set_sd_dot() {
+    u8g.firstPage();
+    do {
+      u8g.setColorIndex(1);
+      u8g.drawPixel(0, 0); // draw sd dot
+      u8g.setColorIndex(1); // black on white
+      (*currentMenu)();
+    } while( u8g.nextPage() );
+  }
+  void unset_sd_dot() {
+    u8g.firstPage();
+    do {
+      u8g.setColorIndex(0);
+      u8g.drawPixel(0, 0); // draw sd dot
+      u8g.setColorIndex(1); // black on white
+      (*currentMenu)();
+    } while( u8g.nextPage() );
+  }
+#endif
+
 /**
  * Update the LCD, read encoder buttons, etc.
  *   - Read button states

MarlinKimbra/ultralcd.h

@@ -48,6 +48,11 @@
   #else
     FORCE_INLINE void lcd_buttons_update() {}
   #endif
+  
+  #if ENABLED(SDSUPPORT) && ENABLED(SD_SETTINGS)
+    extern void set_sd_dot();
+    extern void unset_sd_dot();
+  #endif
 
   extern int plaPreheatHotendTemp;
   extern int plaPreheatHPBTemp;