Skip to content

M
MarlinKimbra
Commit d93c1b1b authored by MagoKimbra's avatar MagoKimbra
Browse files
Options

Insert split language

parent 7c2a0ac5
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 2158 additions and 2378 deletions
MarlinKimbra/ConfigurationStore.cpp
View file @ d93c1b1b
......@@ -171,7 +171,10 @@ void Config_PrintSettings()
SERIAL_ECHOPAIR(" M201 X" ,max_acceleration_units_per_sq_second[0] );
SERIAL_ECHOPAIR(" Y" , max_acceleration_units_per_sq_second[1] );
SERIAL_ECHOPAIR(" Z" ,max_acceleration_units_per_sq_second[2] );
SERIAL_ECHOPAIR(" E" ,max_acceleration_units_per_sq_second[3]);
SERIAL_ECHOPAIR(" E0" ,max_acceleration_units_per_sq_second[3]);
SERIAL_ECHOPAIR(" E1" ,max_acceleration_units_per_sq_second[4]);
SERIAL_ECHOPAIR(" E2" ,max_acceleration_units_per_sq_second[5]);
SERIAL_ECHOPAIR(" E3" ,max_acceleration_units_per_sq_second[6]);
SERIAL_ECHOLN("");
SERIAL_ECHO_START;
......@@ -358,17 +361,17 @@ void Config_ResetDefault()
{
axis_steps_per_unit[i]=tmp1[i];
max_feedrate[i]=tmp2[i];
max_acceleration_units_per_sq_second[i]=tmp4[i];
}
for (short i=0;i<4;i++)
for (short i=0;i<4;i++)
{
max_retraction_feedrate[i]=tmp3[i];
max_acceleration_units_per_sq_second[i]=tmp4[i];
#ifdef SCARA
axis_scaling[i]=1;
#endif
#ifdef SCARA
axis_scaling[i]=1;
#endif
}
// steps per sq second need to be updated to agree with the units per sq second
reset_acceleration_rates();
......
MarlinKimbra/Configuration_Cartesian.h
View file @ d93c1b1b
......@@ -192,7 +192,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the lo
#define MANUAL_Z_HOME_POS 0
//// MOVEMENT SETTINGS
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
#define NUM_AXIS 7 // The axis order in all axis related arrays is X, Y, Z, E0, E1, E2, E3
#define HOMING_FEEDRATE {100*60,100*60,2*60,0} // set the homing speeds (mm/min)
// default settings
......@@ -200,7 +200,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the lo
#define DEFAULT_AXIS_STEPS_PER_UNIT {80,80,3200,625,625,625,625} // X, Y, Z, E0, E1, E2, E3 default steps per unit
#define DEFAULT_MAX_FEEDRATE {300,300,2,100,100,100,100} // X, Y, Z, E0, E1, E2, E3 (mm/sec)
#define DEFAULT_RETRACTION_MAX_FEEDRATE {110,110,110,110} // E0, E1, E2, E3 (mm/sec)
#define DEFAULT_MAX_ACCELERATION {3000,3000,50,1000} // X, Y, Z, E maximum start speed for accelerated moves.
#define DEFAULT_MAX_ACCELERATION {3000,3000,50,1000,1000,1000,1000} // X, Y, Z, E0, E1, E2, E3 maximum start speed for accelerated moves.
#define DEFAULT_ACCELERATION 2500 // X, Y, Z and E max acceleration in mm/s^2 for printing moves
#define DEFAULT_RETRACT_ACCELERATION 3000 // X, Y, Z and E max acceleration in mm/s^2 for retracts
......
MarlinKimbra/Configuration_Corexy.h
View file @ d93c1b1b
......@@ -197,7 +197,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the lo
#define MANUAL_Z_HOME_POS 0
//// MOVEMENT SETTINGS
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
#define NUM_AXIS 7 // The axis order in all axis related arrays is X, Y, Z, E0, E1, E2, E3
#define HOMING_FEEDRATE {100*60,100*60,2*60,0} // set the homing speeds (mm/min)
// default settings
......@@ -205,7 +205,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the lo
#define DEFAULT_AXIS_STEPS_PER_UNIT {80,80,3200,625,625,625,625} // X, Y, Z, E0, E1, E2, E3 default steps per unit
#define DEFAULT_MAX_FEEDRATE {300,300,2,100,100,100,100} // X, Y, Z, E0, E1, E2, E3 (mm/sec)
#define DEFAULT_RETRACTION_MAX_FEEDRATE {110,110,110,110} // E0, E1, E2, E3 (mm/sec)
#define DEFAULT_MAX_ACCELERATION {3000,3000,50,1000} // X, Y, Z, E maximum start speed for accelerated moves.
#define DEFAULT_MAX_ACCELERATION {3000,3000,50,1000,1000,1000} // X, Y, Z, E0, E1, E2, E3 maximum start speed for accelerated moves.
#define DEFAULT_ACCELERATION 2500 // X, Y, Z and E max acceleration in mm/s^2 for printing moves
#define DEFAULT_RETRACT_ACCELERATION 3000 // X, Y, Z and E max acceleration in mm/s^2 for retracts
......
MarlinKimbra/Configuration_Delta.h
View file @ d93c1b1b
......@@ -15,16 +15,16 @@
#define DELTA_SEGMENTS_PER_SECOND 200
// Center-to-center distance of the holes in the diagonal push rods.
#define DEFAULT_DELTA_DIAGONAL_ROD 217 // mm
#define DEFAULT_DELTA_DIAGONAL_ROD 217 // mm
// Horizontal offset from middle of printer to smooth rod center.
#define DELTA_SMOOTH_ROD_OFFSET 145 // mm
#define DELTA_SMOOTH_ROD_OFFSET 145 // mm
// Horizontal offset of the universal joints on the end effector.
#define DELTA_EFFECTOR_OFFSET 20 // mm
#define DELTA_EFFECTOR_OFFSET 20 // mm
// Horizontal offset of the universal joints on the carriages.
#define DELTA_CARRIAGE_OFFSET 20 // mm
#define DELTA_CARRIAGE_OFFSET 20 // mm
// Printer radius
#define PRINTER_RADIUS 70
......@@ -36,7 +36,7 @@
#define DEBUG_MESSAGES
// Precision for G30 delta autocalibration function
#define AUTOCALIBRATION_PRECISION 0.1 // mm
#define AUTOCALIBRATION_PRECISION 0.1 // mm
// Diameter of print bed - this is used to set the distance that autocalibration probes the bed at.
#define BED_DIAMETER 140 // mm
......@@ -44,12 +44,12 @@
// Z-Probe variables
// Start and end location values are used to deploy/retract the probe (will move from start to end and back again)
#define PROBING_FEEDRATE 600 // Speed for individual probe Use: G30 A F600
#define Z_PROBE_OFFSET {0, -10, -11.5, 0} // X, Y, Z, E distance between hotend nozzle and deployed bed leveling probe.
#define Z_PROBE_DEPLOY_START_LOCATION {0, 0, 30, 0} // X, Y, Z, E start location for z-probe deployment sequence
#define Z_PROBE_DEPLOY_END_LOCATION {0, 0, 30, 0} // X, Y, Z, E end location for z-probe deployment sequence
#define Z_PROBE_RETRACT_START_LOCATION {0, 0, 30, 0} // X, Y, Z, E start location for z-probe retract sequence
#define Z_PROBE_RETRACT_END_LOCATION {0, 0, 30, 0} // X, Y, Z, E end location for z-probe retract sequence
#define AUTOLEVEL_GRID 20 // Distance between autolevel Z probing points, should be less than print surface radius/3.
#define Z_PROBE_OFFSET {0,-10,-11.5,0} // X, Y, Z, E distance between hotend nozzle and deployed bed leveling probe.
#define Z_PROBE_DEPLOY_START_LOCATION {0,0,30,0} // X, Y, Z, E start location for z-probe deployment sequence
#define Z_PROBE_DEPLOY_END_LOCATION {0,0,30,0} // X, Y, Z, E end location for z-probe deployment sequence
#define Z_PROBE_RETRACT_START_LOCATION {0,0,30,0} // X, Y, Z, E start location for z-probe retract sequence
#define Z_PROBE_RETRACT_END_LOCATION {0,0,30,0} // X, Y, Z, E end location for z-probe retract sequence
#define AUTOLEVEL_GRID 20 // Distance between autolevel Z probing points, should be less than print surface radius/3.
//===========================================================================
//=============================Mechanical Settings===========================
......@@ -70,7 +70,7 @@
// The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins.
const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
const bool X_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
const bool Y_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
......@@ -79,22 +79,22 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
#define X_ENABLE_ON 0
#define Y_ENABLE_ON 0
#define Z_ENABLE_ON 0
#define E_ENABLE_ON 0 // For all extruders
#define E_ENABLE_ON 0 // For all extruders
// Disables axis when it's not being used.
#define DISABLE_X false
#define DISABLE_Y false
#define DISABLE_Z false
#define DISABLE_E false // For all extruders
#define DISABLE_E false // For all extruders
#define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled
#define INVERT_X_DIR false
#define INVERT_Y_DIR false
#define INVERT_Z_DIR false
#define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
// ENDSTOP SETTINGS:
// Sets direction of endstops when homing; 1=MAX, -1=MIN
......@@ -112,7 +112,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
//Manual homing switch locations:
#define MANUAL_X_HOME_POS 0
#define MANUAL_Y_HOME_POS 0
#define MANUAL_Z_HOME_POS 210 // Distance between nozzle and print surface after homing.
#define MANUAL_Z_HOME_POS 210 // Distance between nozzle and print surface after homing.
// Travel limits after homing
#define X_MAX_POS PRINTER_RADIUS
......@@ -127,20 +127,20 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS)
//// MOVEMENT SETTINGS
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
#define HOMING_FEEDRATE {100*60, 100*60, 100*60, 0} // set the homing speeds (mm/min)
#define NUM_AXIS 7 // The axis order in all axis related arrays is X, Y, Z, E
#define HOMING_FEEDRATE {100*60,100*60,100*60,0} // set the homing speeds (mm/min)
// default settings
// delta speeds must be the same on xyz
#define DEFAULT_AXIS_STEPS_PER_UNIT {80,80,80,451,451,451,451} // X, Y, Z, E0, E1, E2, E3
#define DEFAULT_MAX_FEEDRATE {300,300,300,45,45,45,45} // X, Y, Z, E0, E1, E2, E3 (mm/sec)
#define DEFAULT_RETRACTION_MAX_FEEDRATE {80,80,80,80} // E0, E1, E2, E3 (mm/sec)
#define DEFAULT_MAX_ACCELERATION {2000,2000,2000,1000} // X, Y, Z, E maximum start speed for accelerated moves.
#define DEFAULT_AXIS_STEPS_PER_UNIT {80,80,80,451,625,625,625} // X, Y, Z, E0, E1, E2, E3
#define DEFAULT_MAX_FEEDRATE {300,300,300,45,100,100,100} // X, Y, Z, E0, E1, E2, E3 (mm/sec)
#define DEFAULT_RETRACTION_MAX_FEEDRATE {80,150,150,150} // E0, E1, E2, E3 (mm/sec)
#define DEFAULT_MAX_ACCELERATION {2000,2000,2000,1000,1000,1000,1000} // X, Y, Z, E0, E1, E2, E3 maximum start speed for accelerated moves.
#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E max acceleration in mm/s^2 for printing moves
#define DEFAULT_RETRACT_ACCELERATION 2500 // X, Y, Z and E max acceleration in mm/s^2 for retracts
#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E max acceleration in mm/s^2 for printing moves
#define DEFAULT_RETRACT_ACCELERATION 2500 // X, Y, Z and E max acceleration in mm/s^2 for retracts
// The speed change that does not require acceleration (i.e. the software might assume it can be done instantaneously)
#define DEFAULT_XYJERK 20.0 // (mm/sec)
#define DEFAULT_ZJERK 20.0 // (mm/sec)
#define DEFAULT_EJERK 5.0 // (mm/sec)
#define DEFAULT_XYJERK 20 // (mm/sec)
#define DEFAULT_ZJERK 20 // (mm/sec)
#define DEFAULT_EJERK 5 // (mm/sec)
MarlinKimbra/Configuration_Scara.h
View file @ d93c1b1b
......@@ -215,7 +215,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
//// MOVEMENT SETTINGS
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
#define NUM_AXIS 7 // The axis order in all axis related arrays is X, Y, Z, E0, E1, E2, E3
#define HOMING_FEEDRATE {40*60, 40*60, 10*60, 0} // set the homing speeds (mm/min)
// default settings
......@@ -223,7 +223,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
#define DEFAULT_AXIS_STEPS_PER_UNIT {103.69,103.69,200/1.25,1000,1000,1000,1000} // X, Y, Z, E0, E1, E2, E3
#define DEFAULT_MAX_FEEDRATE {300,300,4,45,45,45,45} // X, Y, Z, E0, E1, E2, E3 (mm/sec)
#define DEFAULT_RETRACTION_MAX_FEEDRATE {80,80,80,80} // E0, E1, E2, E3 (mm/sec)
#define DEFAULT_MAX_ACCELERATION {5000,5000,50,5000} // X, Y, Z, E maximum start speed for accelerated moves.
#define DEFAULT_MAX_ACCELERATION {5000,5000,50,5000,5000,5000,5000} // X, Y, Z, E0, E1, E2, E3 maximum start speed for accelerated moves.
#define DEFAULT_ACCELERATION 400 // X, Y, Z and E max acceleration in mm/s^2 for printing moves
#define DEFAULT_RETRACT_ACCELERATION 2000 // X, Y, Z and E max acceleration in mm/s^2 for retracts
......
MarlinKimbra/Configuration_adv.h
View file @ d93c1b1b
......@@ -308,7 +308,6 @@
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
//#define SDCARD_SORT_ALPHA // Sort SD file listings in ASCII order. Find additional options in cardreader.h
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
// using:
......@@ -361,8 +360,8 @@
#define D_FILAMENT 2.85
#define STEPS_MM_E 836
#define EXTRUTION_AREA (0.25 * D_FILAMENT * D_FILAMENT * 3.14159)
#define STEPS_PER_CUBIC_MM_E (axis_steps_per_unit[E_AXIS]/ EXTRUTION_AREA)
#define EXTRUSION_AREA (0.25 * D_FILAMENT * D_FILAMENT * 3.14159)
#define STEPS_PER_CUBIC_MM_E (axis_steps_per_unit[E_AXIS]/ EXTRUSION_AREA)
#endif // ADVANCE
......
MarlinKimbra/Marlin.h
View file @ d93c1b1b
......@@ -30,7 +30,7 @@
# include "Arduino.h"
#else
# include "WProgram.h"
//Arduino < 1.0.0 does not define this, so we need to do it ourselves
//Arduino < 1.0.0 does not define this, so we need to do it ourselves
# define analogInputToDigitalPin(p) ((p) + A0)
#endif
......@@ -50,13 +50,13 @@
#include "WString.h"
#ifdef AT90USB
#ifdef BTENABLED
#define MYSERIAL bt
#ifdef BTENABLED
#define MYSERIAL bt
#else
#define MYSERIAL Serial
#endif // BTENABLED
#else
#define MYSERIAL Serial
#endif // BTENABLED
#else
#define MYSERIAL MSerial
#define MYSERIAL MSerial
#endif
#define SERIAL_PROTOCOL(x) (MYSERIAL.print(x))
......@@ -181,6 +181,7 @@ enum AxisEnum {X_AXIS=0, Y_AXIS=1, Z_AXIS=2, E_AXIS=3};
void FlushSerialRequestResend();
void ClearToSend();
void get_coordinates();
#ifdef DELTA
......@@ -206,7 +207,6 @@ extern float delta_tower3_x,delta_tower3_y;
void calculate_delta(float cartesian[3]);
void calculate_SCARA_forward_Transform(float f_scara[3]);
#endif
void prepare_move();
void kill();
void pause();
......
MarlinKimbra/Marlin_main.cpp
View file @ d93c1b1b
......@@ -145,9 +145,9 @@
// M150 - Set BlinkM Color Output R: Red<0-255> U(!): Green<0-255> B: Blue<0-255> over i2c, G for green does not work.
// M190 - Sxxx Wait for bed current temp to reach target temp. Waits only when heating
// Rxxx Wait for bed current temp to reach target temp. Waits when heating and cooling
// M200 - D<millimeters>- set filament diameter and set E axis units to cubic millimeters (use S0 to set back to millimeters).
// M200 D<millimeters>- set filament diameter and set E axis units to cubic millimeters (use S0 to set back to millimeters).
// M201 - Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000)
// M202 - Set max acceleration in units/s^2 for travel moves (M202 X1000 Y1000) Unused in MagoKimbra!!
// M202 - Set max acceleration in units/s^2 for travel moves (M202 X1000 Y1000) Unused in Marlin!!
// M203 - Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E10000) in mm/sec
// M204 - Set default acceleration: S normal moves T filament only moves (M204 S3000 T7000) in mm/sec^2 also sets minimum segment time in ms (B20000) to prevent buffer under-runs and M20 minimum feedrate
// M205 - advanced settings: minimum travel speed S=while printing T=travel only, B=minimum segment time X= maximum xy jerk, Z=maximum Z jerk, E=maximum E jerk
......@@ -155,10 +155,10 @@
// M207 - set retract length S[positive mm] F[feedrate mm/min] Z[additional zlift/hop], stays in mm regardless of M200 setting
// M208 - set recover=unretract length S[positive mm surplus to the M207 S*] F[feedrate mm/sec]
// M209 - S<1=true/0=false> enable automatic retract detect if the slicer did not support G10/11: every normal extrude-only move will be classified as retract depending on the direction.
// M218 - set hotend offset (in mm): T<hotend_number> X<offset_on_X> Y<offset_on_Y>
// M220 - S<factor in percent>- set speed factor override percentage
// M221 - S<factor in percent>- set extrude factor override percentage
// M226 - P<pin number> S<pin state>- Wait until the specified pin reaches the state required
// M218 - set hotend offset (in mm): T<extruder_number> X<offset_on_X> Y<offset_on_Y>
// M220 S<factor in percent>- set speed factor override percentage
// M221 S<factor in percent>- set extrude factor override percentage
// M226 P<pin number> S<pin state>- Wait until the specified pin reaches the state required
// M240 - Trigger a camera to take a photograph
// M250 - Set LCD contrast C<contrast value> (value 0..63)
// M280 - set servo position absolute. P: servo index, S: angle or microseconds
......@@ -514,7 +514,7 @@ void enquecommand(const char *cmd)
//this is dangerous if a mixing of serial and this happens
strcpy(&(cmdbuffer[bufindw][0]),cmd);
SERIAL_ECHO_START;
SERIAL_ECHOPGM("enqueing \"");
SERIAL_ECHOPGM(MSG_Enqueing);
SERIAL_ECHO(cmdbuffer[bufindw]);
SERIAL_ECHOLNPGM("\"");
bufindw= (bufindw + 1)%BUFSIZE;
......@@ -528,7 +528,7 @@ void enquecommand_P(const char *cmd)
//this is dangerous if a mixing of serial and this happens
strcpy_P(&(cmdbuffer[bufindw][0]),cmd);
SERIAL_ECHO_START;
SERIAL_ECHOPGM("enqueing \"");
SERIAL_ECHOPGM(MSG_Enqueing);
SERIAL_ECHO(cmdbuffer[bufindw]);
SERIAL_ECHOLNPGM("\"");
bufindw= (bufindw + 1)%BUFSIZE;
......@@ -1162,16 +1162,11 @@ static void run_z_probe() {
static void do_blocking_move_to(float x, float y, float z) {
float oldFeedRate = feedrate;
feedrate = homing_feedrate[Z_AXIS];
current_position[Z_AXIS] = z;
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], feedrate/60, active_extruder, active_driver);
st_synchronize();
feedrate = XY_TRAVEL_SPEED;
current_position[X_AXIS] = x;
current_position[Y_AXIS] = y;
current_position[Z_AXIS] = z;
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], feedrate/60, active_extruder, active_driver);
st_synchronize();
......@@ -2099,7 +2094,7 @@ void process_commands()
#ifdef SCARA
current_position[X_AXIS]=code_value();
#else
current_position[X_AXIS]=code_value()+add_homing[0];
current_position[X_AXIS]=code_value()+add_homing[X_AXIS];
#endif
}
}
......@@ -2109,7 +2104,7 @@ void process_commands()
#ifdef SCARA
current_position[Y_AXIS]=code_value();
#else
current_position[Y_AXIS]=code_value()+add_homing[1];
current_position[Y_AXIS]=code_value()+add_homing[Y_AXIS];
#endif
}
}
......@@ -2238,7 +2233,7 @@ void process_commands()
if(code_seen(axis_codes[Z_AXIS])) {
if(code_value_long() != 0) {
current_position[Z_AXIS]=code_value()+add_homing[2];
current_position[Z_AXIS]=code_value()+add_homing[Z_AXIS];
}
}
......@@ -3939,9 +3934,9 @@ Sigma_Exit:
SERIAL_PROTOCOLLN("");
SERIAL_PROTOCOLPGM("SCARA Cal - Theta:");
SERIAL_PROTOCOL(delta[X_AXIS]+add_homing[0]);
SERIAL_PROTOCOL(delta[X_AXIS]+add_homing[X_AXIS]);
SERIAL_PROTOCOLPGM(" Psi+Theta (90):");
SERIAL_PROTOCOL(delta[Y_AXIS]-delta[X_AXIS]-90+add_homing[1]);
SERIAL_PROTOCOL(delta[Y_AXIS]-delta[X_AXIS]-90+add_homing[Y_AXIS]);
SERIAL_PROTOCOLLN("");
SERIAL_PROTOCOLPGM("SCARA step Cal - Theta:");
......@@ -4083,11 +4078,11 @@ Sigma_Exit:
#ifdef SCARA
if(code_seen('T')) // Theta
{
add_homing[0] = code_value() ;
add_homing[X_AXIS] = code_value() ;
}
if(code_seen('P')) // Psi
{
add_homing[1] = code_value() ;
add_homing[Y_AXIS] = code_value() ;
}
#endif
break;
......@@ -4577,12 +4572,12 @@ Sigma_Exit:
//SERIAL_ECHOLN(" Soft endstops disabled ");
if(Stopped == false) {
//get_coordinates(); // For X Y Z E F
delta[0] = 0;
delta[1] = 120;
delta[X_AXIS] = 0;
delta[Y_AXIS] = 120;
calculate_SCARA_forward_Transform(delta);
destination[0] = delta[0]/axis_scaling[X_AXIS];
destination[1] = delta[1]/axis_scaling[Y_AXIS];
destination[X_AXIS] = delta[X_AXIS]/axis_scaling[X_AXIS];
destination[Y_AXIS] = delta[Y_AXIS]/axis_scaling[Y_AXIS];
prepare_move();
//ClearToSend();
return;
......@@ -4594,12 +4589,12 @@ Sigma_Exit:
//SERIAL_ECHOLN(" Soft endstops disabled ");
if(Stopped == false) {
//get_coordinates(); // For X Y Z E F
delta[0] = 90;
delta[1] = 130;
delta[X_AXIS] = 90;
delta[Y_AXIS] = 130;
calculate_SCARA_forward_Transform(delta);
destination[0] = delta[0]/axis_scaling[X_AXIS];
destination[1] = delta[1]/axis_scaling[Y_AXIS];
destination[X_AXIS] = delta[X_AXIS]/axis_scaling[X_AXIS];
destination[Y_AXIS] = delta[Y_AXIS]/axis_scaling[Y_AXIS];
prepare_move();
//ClearToSend();
return;
......@@ -4611,12 +4606,12 @@ Sigma_Exit:
//SERIAL_ECHOLN(" Soft endstops disabled ");
if(Stopped == false) {
//get_coordinates(); // For X Y Z E F
delta[0] = 60;
delta[1] = 180;
delta[X_AXIS] = 60;
delta[Y_AXIS] = 180;
calculate_SCARA_forward_Transform(delta);
destination[0] = delta[0]/axis_scaling[X_AXIS];
destination[1] = delta[1]/axis_scaling[Y_AXIS];
destination[X_AXIS] = delta[X_AXIS]/axis_scaling[X_AXIS];
destination[Y_AXIS] = delta[Y_AXIS]/axis_scaling[Y_AXIS];
prepare_move();
//ClearToSend();
return;
......@@ -4628,12 +4623,12 @@ Sigma_Exit:
//SERIAL_ECHOLN(" Soft endstops disabled ");
if(Stopped == false) {
//get_coordinates(); // For X Y Z E F
delta[0] = 50;
delta[1] = 90;
delta[X_AXIS] = 50;
delta[Y_AXIS] = 90;
calculate_SCARA_forward_Transform(delta);
destination[0] = delta[0]/axis_scaling[X_AXIS];
destination[1] = delta[1]/axis_scaling[Y_AXIS];
destination[X_AXIS] = delta[X_AXIS]/axis_scaling[X_AXIS];
destination[Y_AXIS] = delta[Y_AXIS]/axis_scaling[Y_AXIS];
prepare_move();
//ClearToSend();
return;
......@@ -4645,12 +4640,12 @@ Sigma_Exit:
//SERIAL_ECHOLN(" Soft endstops disabled ");
if(Stopped == false) {
//get_coordinates(); // For X Y Z E F
delta[0] = 45;
delta[1] = 135;
delta[X_AXIS] = 45;
delta[Y_AXIS] = 135;
calculate_SCARA_forward_Transform(delta);
destination[0] = delta[0]/axis_scaling[X_AXIS];
destination[1] = delta[1]/axis_scaling[Y_AXIS];
destination[X_AXIS] = delta[X_AXIS]/axis_scaling[X_AXIS];
destination[Y_AXIS] = delta[Y_AXIS]/axis_scaling[Y_AXIS];
prepare_move();
//ClearToSend();
return;
......
MarlinKimbra/SdFatConfig.h
View file @ d93c1b1b
......@@ -111,13 +111,13 @@ uint8_t const SOFT_SPI_SCK_PIN = 13;
/**
* Defines for long (vfat) filenames
*/
/** Number of UTF-16 characters per entry */
#define FILENAME_LENGTH 13
/** Number of VFAT entries used. Every entry has 13 UTF-16 characters */
#define MAX_VFAT_ENTRIES (2)
/** Number of UTF-16 characters per entry */
#define FILENAME_LENGTH 13
/** Total size of the buffer used to store the long filenames */
#define LONG_FILENAME_LENGTH (FILENAME_LENGTH*MAX_VFAT_ENTRIES+1)
#define LONG_FILENAME_LENGTH (13*MAX_VFAT_ENTRIES+1)
#endif // SdFatConfig_h
#endif
\ No newline at end of file
#endif
MarlinKimbra/cardreader.cpp
View file @ d93c1b1b
This diff is collapsed.
MarlinKimbra/cardreader.h
View file @ d93c1b1b
......@@ -3,14 +3,7 @@
#ifdef SDSUPPORT
#define MAX_DIR_DEPTH 10 // Maximum folder depth
#ifdef SDCARD_SORT_ALPHA
#define SORT_USES_RAM false // Buffer while sorting, else re-read from SD
#define SORT_USES_MORE_RAM false // Always keep the directory in RAM
#define SORT_LIMIT 256 // Maximum number of sorted items
#define FOLDER_SORTING -1 // -1=above 0=none 1=below
#endif
#define MAX_DIR_DEPTH 10
#include "SdFile.h"
enum LsAction {LS_SerialPrint,LS_Count,LS_GetFilename};
......@@ -35,7 +28,7 @@ public:
void getStatus();
void printingHasFinished();
void getfilename(const uint16_t nr);
void getfilename(uint16_t nr, const char* const match=NULL);
uint16_t getnrfilenames();
void getAbsFilename(char *t);
......@@ -46,12 +39,6 @@ public:
void updir();
void setroot();
#ifdef SDCARD_SORT_ALPHA
void presort();
void flush_presort();
void getfilename_sorted(const uint16_t nr);
#endif
FORCE_INLINE bool isFileOpen() { return file.isOpen(); }
FORCE_INLINE bool eof() { return sdpos>=filesize ;};
......@@ -63,29 +50,20 @@ public:
public:
bool saving;
bool logging;
bool sdprinting;
bool cardOK;
char filename[FILENAME_LENGTH];
bool sdprinting ;
bool cardOK ;
char filename[13];
char longFilename[LONG_FILENAME_LENGTH];
bool filenameIsDir;
int lastnr; //last number of the autostart;
private:
SdFile root,*curDir,workDir,workDirParents[MAX_DIR_DEPTH];
uint16_t workDirDepth;
#ifdef SDCARD_SORT_ALPHA
uint16_t sort_count;
uint8_t *sort_order;
#if SORT_USES_MORE_RAM
char **sortshort;
char **sortnames;
uint8_t *isDir;
#endif
#endif
Sd2Card card;
SdVolume volume;
SdFile file;
#define SD_PROCEDURE_DEPTH 1
#define MAXPATHNAMELENGTH (FILENAME_LENGTH*MAX_DIR_DEPTH+MAX_DIR_DEPTH+1)
#define MAXPATHNAMELENGTH (13*MAX_DIR_DEPTH+MAX_DIR_DEPTH+1)
uint8_t file_subcall_ctr;
uint32_t filespos[SD_PROCEDURE_DEPTH];
char filenames[SD_PROCEDURE_DEPTH][MAXPATHNAMELENGTH];
......@@ -97,9 +75,9 @@ private:
bool autostart_stilltocheck; //the sd start is delayed, because otherwise the serial cannot answer fast enought to make contact with the hostsoftware.
LsAction lsAction; //stored for recursion.
uint16_t nrFiles; //counter for the files in the current directory and recycled as position counter for getting the nrFiles'th name in the directory.
int16_t nrFiles; //counter for the files in the current directory and recycled as position counter for getting the nrFiles'th name in the directory.
char* diveDirName;
void lsDive(const char *prepend,SdFile parent);
void lsDive(const char *prepend, SdFile parent, const char * const match=NULL);
};
extern CardReader card;
#define IS_SD_PRINTING (card.sdprinting)
......
MarlinKimbra/dogm_lcd_implementation.h
View file @ d93c1b1b
This diff is collapsed.
MarlinKimbra/language.h
View file @ d93c1b1b
This diff is collapsed.
MarlinKimbra/language_an.h 0 → 100644
View file @ d93c1b1b
/**
* Aragonese
*
* LCD Menu Messages
* Please note these are limited to 17 characters!
*
*/
#ifndef LANGUAGE_AN_H
#define LANGUAGE_AN_H
#define WELCOME_MSG MACHINE_NAME " parada."
#define MSG_SD_INSERTED "Tarcheta colocada"
#define MSG_SD_REMOVED "Tarcheta retirada"
#define MSG_MAIN "Menu prencipal"
#define MSG_AUTOSTART " Autostart"
#define MSG_DISABLE_STEPPERS "Amortar motors"
#define MSG_AUTO_HOME "Levar a l'orichen"
#define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Establir zero"
#define MSG_PREHEAT_PLA "Precalentar PLA"
#define MSG_PREHEAT_PLA0 "Precalentar PLA0"
#define MSG_PREHEAT_PLA1 "Precalentar PLA1"
#define MSG_PREHEAT_PLA2 "Precalentar PLA2"
#define MSG_PREHEAT_PLA012 "Precalentar PLA a"
#define MSG_PREHEAT_PLA_BEDONLY "Prec. PLA Base"
#define MSG_PREHEAT_PLA_SETTINGS "Achustar tem. PLA"
#define MSG_PREHEAT_ABS "Precalentar ABS"
#define MSG_PREHEAT_ABS0 "Precalentar ABS0"
#define MSG_PREHEAT_ABS1 "Precalentar ABS1"
#define MSG_PREHEAT_ABS2 "Precalentar ABS2"
#define MSG_PREHEAT_ABS012 "Precalentar ABS a"
#define MSG_PREHEAT_ABS_BEDONLY "Prec. ABS Base"
#define MSG_PREHEAT_ABS_SETTINGS "Achustar tem. ABS"
#define MSG_COOLDOWN "Enfriar"
#define MSG_SWITCH_PS_ON "Enchegar Fuent"
#define MSG_SWITCH_PS_OFF "Desenchegar Fuent"
#define MSG_EXTRUDE "Extruir"
#define MSG_RETRACT "Retraer"
#define MSG_MOVE_AXIS "Mover Eixes"
#define MSG_MOVE_X "Move X"
#define MSG_MOVE_Y "Move Y"
#define MSG_MOVE_Z "Move Z"
#define MSG_MOVE_E "Extruder"
#define MSG_MOVE_E1 "Extruder2"
#define MSG_MOVE_E2 "Extruder3"
#define MSG_MOVE_01MM "Move 0.1mm"
#define MSG_MOVE_1MM "Move 1mm"
#define MSG_MOVE_10MM "Move 10mm"
#define MSG_SPEED "Velocidat"
#define MSG_NOZZLE "Nozzle"
#define MSG_NOZZLE1 "Nozzle2"
#define MSG_NOZZLE2 "Nozzle3"
#define MSG_BED "Base"
#define MSG_FAN_SPEED "Ixoriador"
#define MSG_FLOW "Fluxo"
#define MSG_FLOW0 "Fluxo 0"
#define MSG_FLOW1 "Fluxo 1"
#define MSG_FLOW2 "Fluxo 2"
#define MSG_CONTROL "Control"
#define MSG_MIN "\002 Min"
#define MSG_MAX "\002 Max"
#define MSG_FACTOR "\002 Fact"
#define MSG_AUTOTEMP "Autotemp"
#define MSG_ON "On"
#define MSG_OFF "Off"
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_ACC "Acel"
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ves-jerk"
#define MSG_VMAX "Vmax"
#define MSG_X "x"
#define MSG_Y "y"
#define MSG_Z "z"
#define MSG_E "y"
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "VTrav min"
#define MSG_AMAX "Amax"
#define MSG_A_RETRACT "A-retrac."
#define MSG_XSTEPS "X trangos/mm"
#define MSG_YSTEPS "Y trangos/mm"
#define MSG_ZSTEPS "Z trangos/mm"
#define MSG_ESTEPS "E trangos/mm"
#define MSG_TEMPERATURE "Temperatura"
#define MSG_MOTION "Movimiento"
#define MSG_CONTRAST "Contrast"
#define MSG_STORE_EPROM "Alzar Memoria"
#define MSG_LOAD_EPROM "Cargar Memoria"
#define MSG_RESTORE_FAILSAFE "Rest. d'emerchen."
#define MSG_REFRESH "Tornar a cargar"
#define MSG_WATCH "Monitorizar"
#define MSG_PREPARE "Preparar"
#define MSG_TUNE "Achustar"
#define MSG_PAUSE_PRINT "Pausar impresion"
#define MSG_RESUME_PRINT "Contin. impresion"
#define MSG_STOP_PRINT "Detener Impresion"
#define MSG_CARD_MENU "Menu de SD"
#define MSG_NO_CARD "No i hai tarcheta"
#define MSG_DWELL "Reposo..."
#define MSG_USERWAIT "Asperan. ordines"
#define MSG_RESUMING "Contin. impresion"
#define MSG_PRINT_ABORTED "Print aborted"
#define MSG_NO_MOVE "Sin movimiento"
#define MSG_KILLED "ATURADA D'EMERCH."
#define MSG_STOPPED "ATURADA."
#define MSG_CONTROL_RETRACT "Retraer mm"
#define MSG_CONTROL_RETRACT_SWAP "Swap Retraer mm"
#define MSG_CONTROL_RETRACTF "Retraer F"
#define MSG_CONTROL_RETRACT_ZLIFT "Devantar mm"
#define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Swap DesRet +mm"
#define MSG_CONTROL_RETRACT_RECOVERF "DesRet F"
#define MSG_AUTORETRACT "AutoRetr."
#define MSG_FILAMENTCHANGE "Cambear"
#define MSG_INIT_SDCARD "Encetan. tarcheta"
#define MSG_CNG_SDCARD "Cambiar tarcheta"
#define MSG_ZPROBE_OUT "Z probe out. bed"
#define MSG_POSITION_UNKNOWN "Home X/Y before Z"
#define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
#define MSG_RECTRACT "Retraer"
#define MSG_RECTRACT_WIDE "Retraer"
#define MSG_TEMPERATURE_WIDE "Temperatura"
#define MSG_TEMPERATURE_RTN "Temperatura"
#define MSG_MAIN_WIDE "Menu Prencipal"
#define MSG_MOTION_WIDE "Movimiento"
#define MSG_PREPARE_ALT "Preparar"
#define MSG_CONTROL_ARROW "Control \x7E"
#define MSG_RETRACT_ARROW "Retraer \x7E"
#define MSG_STEPPER_RELEASED "Desacoplada."
#endif // LANGUAGE_AN_H
MarlinKimbra/language_ca.h 0 → 100644
View file @ d93c1b1b
/**
* Catalan
*
* LCD Menu Messages
* Please note these are limited to 17 characters!
*
*/
#ifndef LANGUAGE_CA_H
#define LANGUAGE_CA_H
#define WELCOME_MSG MACHINE_NAME " preparada."
#define MSG_SD_INSERTED "SD detectada."
#define MSG_SD_REMOVED "SD expulsada."
#define MSG_MAIN "Menu principal"
#define MSG_AUTOSTART "Inici automatic"
#define MSG_DISABLE_STEPPERS "Apagar motors"
#define MSG_AUTO_HOME "Home global"
#define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Establir origen"
#define MSG_PREHEAT_PLA "Preescalfar PLA"
#define MSG_PREHEAT_PLA0 "Preescalfar PLA 1"
#define MSG_PREHEAT_PLA1 "Preescalfar PLA 2"
#define MSG_PREHEAT_PLA2 "Preescalfar PLA 3"
#define MSG_PREHEAT_PLA012 "Preesc. tot PLA"
#define MSG_PREHEAT_PLA_BEDONLY "Preesc. llit PLA"
#define MSG_PREHEAT_PLA_SETTINGS "Configuració PLA"
#define MSG_PREHEAT_ABS "Preescalfar ABS"
#define MSG_PREHEAT_ABS0 "Preescalfar ABS 1"
#define MSG_PREHEAT_ABS1 "Preescalfar ABS 2"
#define MSG_PREHEAT_ABS2 "Preescalfar ABS 3"
#define MSG_PREHEAT_ABS012 "Preesc. tot ABS"
#define MSG_PREHEAT_ABS_BEDONLY "Preesc. llit ABS"
#define MSG_PREHEAT_ABS_SETTINGS "Configuració ABS"
#define MSG_COOLDOWN "Refredar"
#define MSG_SWITCH_PS_ON "Switch power on"
#define MSG_SWITCH_PS_OFF "Switch power off"
#define MSG_EXTRUDE "Extruir"
#define MSG_RETRACT "Refredar"
#define MSG_MOVE_AXIS "Moure eixos"
#define MSG_MOVE_X "Moure X"
#define MSG_MOVE_Y "Moure Y"
#define MSG_MOVE_Z "Moure Z"
#define MSG_MOVE_E "Extrusor"
#define MSG_MOVE_E1 "Extruder2"
#define MSG_MOVE_E2 "Extruder3"
#define MSG_MOVE_01MM "Moure 0.1mm"
#define MSG_MOVE_1MM "Moure 1mm"
#define MSG_MOVE_10MM "Moure 10mm"
#define MSG_SPEED "Velocitat"
#define MSG_NOZZLE "Nozzle"
#define MSG_NOZZLE1 "Nozzle2"
#define MSG_NOZZLE2 "Nozzle3"
#define MSG_BED "Llit"
#define MSG_FAN_SPEED "Vel. Ventilador"
#define MSG_FLOW "Fluxe"
#define MSG_FLOW0 "Fluxe 0"
#define MSG_FLOW1 "Fluxe 1"
#define MSG_FLOW2 "Fluxe 2"
#define MSG_CONTROL "Control"
#define MSG_MIN " \002 Min"
#define MSG_MAX " \002 Max"
#define MSG_FACTOR " \002 Fact"
#define MSG_AUTOTEMP "Autotemp"
#define MSG_ON "On "
#define MSG_OFF "Off"
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_ACC "Accel"
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX "Vmax "
#define MSG_X "x"
#define MSG_Y "y"
#define MSG_Z "z"
#define MSG_E "e"
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "VTrav min"
#define MSG_AMAX "Amax "
#define MSG_A_RETRACT "A-retract"
#define MSG_XSTEPS "Xpassos/mm"
#define MSG_YSTEPS "Ypassos/mm"
#define MSG_ZSTEPS "Zpassos/mm"
#define MSG_ESTEPS "Epassos/mm"
#define MSG_TEMPERATURE "Temperatura"
#define MSG_MOTION "Moviment"
#define MSG_CONTRAST "Contrast de LCD"
#define MSG_STORE_EPROM "Desar a memoria"
#define MSG_LOAD_EPROM "Carregar de mem."
#define MSG_RESTORE_FAILSAFE "Rest. emergencia"
#define MSG_REFRESH "Refrescar"
#define MSG_WATCH "Pantalla Info."
#define MSG_PREPARE "Preparar"
#define MSG_TUNE "Calibrar"
#define MSG_PAUSE_PRINT "Pausa imp."
#define MSG_RESUME_PRINT "Reprendre imp."
#define MSG_STOP_PRINT "Parar inp."
#define MSG_CARD_MENU "Imprimir de SD"
#define MSG_NO_CARD "-Sense targeta SD"
#define MSG_DWELL "Repos..."
#define MSG_USERWAIT "Esperant usuari.."
#define MSG_RESUMING "Reprenent imp."
#define MSG_PRINT_ABORTED "Print aborted"
#define MSG_NO_MOVE "Sense moviment."
#define MSG_KILLED "PARADA DE EMERG. "
#define MSG_STOPPED "ATURAT. "
#define MSG_CONTROL_RETRACT "Retreure mm"
#define MSG_CONTROL_RETRACT_SWAP "Swap Retreure mm"
#define MSG_CONTROL_RETRACTF "Retreure F"
#define MSG_CONTROL_RETRACT_ZLIFT "Aixecar mm"
#define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Swap DesRet +mm"
#define MSG_CONTROL_RETRACT_RECOVERF "DesRet F"
#define MSG_AUTORETRACT "AutoRetr."
#define MSG_FILAMENTCHANGE "Canviar filament"
#define MSG_INIT_SDCARD "Iniciant SD"
#define MSG_CNG_SDCARD "Canviar SD"
#define MSG_ZPROBE_OUT "Z probe out. bed"
#define MSG_POSITION_UNKNOWN "Home X/Y abans Z"
#define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
#define MSG_RECTRACT "Retreure"
#endif // LANGUAGE_CA_H
MarlinKimbra/language_de.h 0 → 100644
View file @ d93c1b1b
/**
* German
*
* LCD Menu Messages
* Please note these are limited to 17 characters!
*
*/
#ifndef LANGUAGE_DE_H
#define LANGUAGE_DE_H
#define WELCOME_MSG MACHINE_NAME " Bereit."
#define MSG_SD_INSERTED "SDKarte erkannt"
#define MSG_SD_REMOVED "SDKarte entfernt"
#define MSG_MAIN "Hauptmenü"
#define MSG_AUTOSTART "Autostart"
#define MSG_DISABLE_STEPPERS "Stepper abschalt."
#define MSG_AUTO_HOME "Auto Nullpunkt"
#define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Setze Nullpunkt"
#define MSG_PREHEAT_PLA "Vorwärmen PLA"
#define MSG_PREHEAT_PLA0 "Vorwärmen PLA 1"
#define MSG_PREHEAT_PLA1 "Vorwärmen PLA 2"
#define MSG_PREHEAT_PLA2 "Vorwärmen PLA 3"
#define MSG_PREHEAT_PLA012 "Vorw. PLA Alle"
#define MSG_PREHEAT_PLA_BEDONLY "Vorw. PLA Bett"
#define MSG_PREHEAT_PLA_SETTINGS "Vorwärm. PLA Ein."
#define MSG_PREHEAT_ABS "Vorwärmen ABS"
#define MSG_PREHEAT_ABS0 "Vorwärmen ABS 1"
#define MSG_PREHEAT_ABS1 "Vorwärmen ABS 2"
#define MSG_PREHEAT_ABS2 "Vorwärmen ABS 3"
#define MSG_PREHEAT_ABS012 "Vorw. ABS Alle"
#define MSG_PREHEAT_ABS_BEDONLY "Vorw. ABS Bett"
#define MSG_PREHEAT_ABS_SETTINGS "Vorwärm. ABS Ein."
#define MSG_COOLDOWN "Abkühlen"
#define MSG_SWITCH_PS_ON "Switch Power On"
#define MSG_SWITCH_PS_OFF "Switch Power Off"
#define MSG_EXTRUDE "Extrude"
#define MSG_RETRACT "Retract"
#define MSG_MOVE_AXIS "Achsen bewegen"
#define MSG_MOVE_X "X bewegen"
#define MSG_MOVE_Y "Y bewegen"
#define MSG_MOVE_Z "Z bewegen"
#define MSG_MOVE_E "Extruder"
#define MSG_MOVE_E1 "Extruder2"
#define MSG_MOVE_E2 "Extruder3"
#define MSG_MOVE_01MM "0.1mm bewegen"
#define MSG_MOVE_1MM "1mm bewegen"
#define MSG_MOVE_10MM "10mm bewegen"
#define MSG_SPEED "Geschw"
#define MSG_NOZZLE "Düse"
#define MSG_NOZZLE1 "Düse2"
#define MSG_NOZZLE2 "Düse3"
#define MSG_BED "Bett"
#define MSG_FAN_SPEED "Lüftergeschw."
#define MSG_FLOW "Fluss"
#define MSG_FLOW0 "Fluss 0"
#define MSG_FLOW1 "Fluss 1"
#define MSG_FLOW2 "Fluss 2"
#define MSG_CONTROL "Einstellungen"
#define MSG_MIN "\002 Min"
#define MSG_MAX "\002 Max"
#define MSG_FACTOR "\002 Faktor"
#define MSG_AUTOTEMP "AutoTemp"
#define MSG_ON "Ein"
#define MSG_OFF "Aus"
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_ACC "Acc"
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX "Vmax "
#define MSG_X "x"
#define MSG_Y "y"
#define MSG_Z "z"
#define MSG_E "e"
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "VTrav min"
#define MSG_AMAX "Amax "
#define MSG_A_RETRACT "A-Retract"
#define MSG_XSTEPS "Xsteps/mm"
#define MSG_YSTEPS "Ysteps/mm"
#define MSG_ZSTEPS "Zsteps/mm"
#define MSG_ESTEPS "Esteps/mm"
#define MSG_TEMPERATURE "Temperatur"
#define MSG_MOTION "Bewegung"
#define MSG_CONTRAST "LCD contrast"
#define MSG_STORE_EPROM "EPROM speichern"
#define MSG_LOAD_EPROM "EPROM laden"
#define MSG_RESTORE_FAILSAFE "Standardkonfig."
#define MSG_REFRESH "Aktualisieren"
#define MSG_WATCH "Beobachten"
#define MSG_PREPARE "Vorbereitung"
#define MSG_TUNE "Justierung"
#define MSG_PAUSE_PRINT "Druck anhalten"
#define MSG_RESUME_PRINT "Druck fortsetz"
#define MSG_STOP_PRINT "Druck stoppen"
#define MSG_CARD_MENU "SDKarten Menü"
#define MSG_NO_CARD "Keine SDKarte"
#define MSG_DWELL "Warten..."
#define MSG_USERWAIT "Warte auf Nutzer"
#define MSG_RESUMING "Druck fortsetzung"
#define MSG_PRINT_ABORTED "Print aborted"
#define MSG_NO_MOVE "Kein Zug."
#define MSG_KILLED "KILLED"
#define MSG_STOPPED "GESTOPPT"
#define MSG_CONTROL_RETRACT "Retract mm"
#define MSG_CONTROL_RETRACT_SWAP "Wechs. Retract mm"
#define MSG_CONTROL_RETRACTF "Retract V"
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Wechs. UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
#define MSG_AUTORETRACT "AutoRetr."
#define MSG_FILAMENTCHANGE "Filament wechseln"
#define MSG_INIT_SDCARD "Init. SD-Card"
#define MSG_CNG_SDCARD "Change SD-Card"
#define MSG_ZPROBE_OUT "Z probe out. bed"
#define MSG_POSITION_UNKNOWN "Home X/Y before Z"
#define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
#define MSG_STEPPER_RELEASED "Stepper frei"
#define MSG_RECTRACT_WIDE "Rectract"
#endif // LANGUAGE_DE_H
MarlinKimbra/language_en.h 0 → 100644
View file @ d93c1b1b
/**
* English
*
* LCD Menu Messages
* Please note these are limited to 17 characters!
*
*/
#ifndef LANGUAGE_EN_H
#define LANGUAGE_EN_H
#define WELCOME_MSG MACHINE_NAME " ready."
#define MSG_SD_INSERTED "Card inserted"
#define MSG_SD_REMOVED "Card removed"
#define MSG_MAIN "Main"
#define MSG_AUTOSTART "Autostart"
#define MSG_DISABLE_STEPPERS "Disable steppers"
#define MSG_AUTO_HOME "Auto home"
#define MSG_BED_SETTING "Bed Setting"
#define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Set origin"
#define MSG_PREHEAT_PLA "Preheat PLA"
#define MSG_PREHEAT_PLA0 "Preheat PLA 1"
#define MSG_PREHEAT_PLA1 "Preheat PLA 2"
#define MSG_PREHEAT_PLA2 "Preheat PLA 3"
#define MSG_PREHEAT_PLA3 "Preheat PLA 4"
#define MSG_PREHEAT_PLA0123 "Preheat PLA All"
#define MSG_PREHEAT_PLA_BEDONLY "Preheat PLA Bed"
#define MSG_PREHEAT_PLA_SETTINGS "Preheat PLA conf"
#define MSG_PREHEAT_ABS "Preheat ABS"
#define MSG_PREHEAT_ABS0 "Preheat ABS 1"
#define MSG_PREHEAT_ABS1 "Preheat ABS 2"
#define MSG_PREHEAT_ABS2 "Preheat ABS 3"
#define MSG_PREHEAT_ABS3 "Preheat ABS 4"
#define MSG_PREHEAT_ABS0123 "Preheat ABS All"
#define MSG_PREHEAT_ABS_BEDONLY "Preheat ABS Bed"
#define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS conf"
#define MSG_PREHEAT_GUM "Preheat GUM"
#define MSG_PREHEAT_GUM0 "Preheat GUM 1"
#define MSG_PREHEAT_GUM1 "Preheat GUM 2"
#define MSG_PREHEAT_GUM2 "Preheat GUM 3"
#define MSG_PREHEAT_GUM3 "Preheat GUM 4"
#define MSG_PREHEAT_GUM_BEDONLY "Preheat GUM Bed"
#define MSG_PREHEAT_GUM_SETTINGS "Preheat GUM conf"
#define MSG_COOLDOWN "Cooldown"
#define MSG_SWITCH_PS_ON "Switch power on"
#define MSG_SWITCH_PS_OFF "Switch power off"
#define MSG_EXTRUDE "Extrude"
#define MSG_RETRACT "Retract"
#define MSG_MOVE_AXIS "Move axis"
#define MSG_MOVE_X "Move X"
#define MSG_MOVE_Y "Move Y"
#define MSG_MOVE_Z "Move Z"
#define MSG_MOVE_E "Extruder"
#define MSG_MOVE_E1 "Extruder2"
#define MSG_MOVE_E2 "Extruder3"
#define MSG_MOVE_E3 "Extruder4"
#define MSG_MOVE_01MM "Move 0.1mm"
#define MSG_MOVE_1MM "Move 1mm"
#define MSG_MOVE_10MM "Move 10mm"
#define MSG_SPEED "Speed"
#define MSG_NOZZLE "Nozzle"
#define MSG_NOZZLE1 "Nozzle2"
#define MSG_NOZZLE2 "Nozzle3"
#define MSG_BED "Bed"
#define MSG_FAN_SPEED "Fan speed"
#define MSG_FLOW "Flow"
#define MSG_FLOW0 "Flow 0"
#define MSG_FLOW1 "Flow 1"
#define MSG_FLOW2 "Flow 2"
#define MSG_FLOW3 "Flow 3"
#define MSG_CONTROL "Control"
#define MSG_MIN " \002 Min"
#define MSG_MAX " \002 Max"
#define MSG_FACTOR " \002 Fact"
#define MSG_AUTOTEMP "Autotemp"
#define MSG_ON "On "
#define MSG_OFF "Off"
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_ACC "Accel"
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX "Vmax "
#define MSG_X "x"
#define MSG_Y "y"
#define MSG_Z "z"
#define MSG_E "e"
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "VTrav min"
#define MSG_AMAX "Amax "
#define MSG_A_RETRACT "A-retract"
#define MSG_XSTEPS "Xsteps/mm"
#define MSG_YSTEPS "Ysteps/mm"
#define MSG_ZSTEPS "Zsteps/mm"
#define MSG_E0STEPS "E0steps/mm"
#define MSG_E1STEPS "E1steps/mm"
#define MSG_E2STEPS "E2steps/mm"
#define MSG_E3STEPS "E3steps/mm"
#define MSG_TEMPERATURE "Temperature"
#define MSG_MOTION "Motion"
#define MSG_CONTRAST "LCD contrast"
#define MSG_STORE_EPROM "Store memory"
#define MSG_LOAD_EPROM "Load memory"
#define MSG_RESTORE_FAILSAFE "Restore failsafe"
#define MSG_REFRESH "Refresh"
#define MSG_WATCH "Info screen"
#define MSG_PREPARE "Prepare"
#define MSG_TUNE "Tune"
#define MSG_PAUSE_PRINT "Pause print"
#define MSG_RESUME_PRINT "Resume print"
#define MSG_STOP_PRINT "Stop print"
#define MSG_CARD_MENU "Print from SD"
#define MSG_NO_CARD "No SD card"
#define MSG_DWELL "Sleep..."
#define MSG_USERWAIT "Wait for user..."
#define MSG_RESUMING "Resuming print"
#define MSG_PRINT_ABORTED "Print aborted"
#define MSG_NO_MOVE "No move."
#define MSG_KILLED "KILLED. "
#define MSG_STOPPED "STOPPED. "
#define MSG_CONTROL_RETRACT "Retract mm"
#define MSG_CONTROL_RETRACT_SWAP "Swap Re.mm"
#define MSG_CONTROL_RETRACTF "Retract V"
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "S UnRet+mm"
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
#define MSG_AUTORETRACT "AutoRetr."
#define MSG_FILAMENTCHANGE "Change filament"
#define MSG_INIT_SDCARD "Init. SD card"
#define MSG_CNG_SDCARD "Change SD card"
#define MSG_ZPROBE_OUT "Z probe out. bed"
#define MSG_POSITION_UNKNOWN "Home X/Y before Z"
#define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
#define MSG_LASER "Laser Preset"
#define MSG_CONFIG "Configuration"
#define MSG_BAUDRATE "Baudrate"
#define MSG_RECTRACT "Rectract"
#ifdef FIRMWARE_TEST
#define MSG_FWTEST_YES "Put the Y command to go next"
#define MSG_FWTEST_NO "Put the N command to go next"
#define MSG_FWTEST_YES_NO "Put the Y or N command to go next"
#define MSG_FWTEST_ENDSTOP_ERR "ENDSTOP ERROR! Check wire and connection"
#define MSG_FWTEST_PRESS "Press and hold the endstop "
#define MSG_FWTEST_INVERT "Reverse value in "
#define MSG_FWTEST_XAXIS "Has the nozzle moved to the right?"
#define MSG_FWTEST_YAXIS "Has the nozzle moved forward?"
#define MSG_FWTEST_ZAXIS "Has the nozzle moved up?"
#define MSG_FWTEST_01 "Manually move the axes X, Y and Z away from the endstop"
#define MSG_FWTEST_02 "Do you want check ENDSTOP?"
#define MSG_FWTEST_03 "Start check ENDSTOP"
#define MSG_FWTEST_04 "Start check MOTOR"
#define MSG_FWTEST_ATTENTION "ATTENTION! Check that the three axes are more than 5 mm from the endstop!"
#endif // FIRMWARE_TEST
#endif // LANGUAGE_EN_H
MarlinKimbra/language_es.h 0 → 100644
View file @ d93c1b1b
/**
* Spanish
*
* LCD Menu Messages
* Please note these are limited to 17 characters!
*
*/
#ifndef LANGUAGE_ES_H
#define LANGUAGE_ES_H
#define WELCOME_MSG MACHINE_NAME " lista."
#define MSG_SD_INSERTED "Tarjeta colocada"
#define MSG_SD_REMOVED "Tarjeta retirada"
#define MSG_MAIN "Menu principal"
#define MSG_AUTOSTART " Autostart"
#define MSG_DISABLE_STEPPERS "Apagar motores"
#define MSG_AUTO_HOME "Llevar al origen"
#define MSG_SET_HOME_OFFSETS "Ajustar offsets"
#define MSG_SET_ORIGIN "Establecer cero"
#define MSG_PREHEAT_PLA "Precalentar PLA"
#define MSG_PREHEAT_PLA0 "Precalentar PLA 1"
#define MSG_PREHEAT_PLA1 "Precalentar PLA 2"
#define MSG_PREHEAT_PLA2 "Precalentar PLA 3"
#define MSG_PREHEAT_PLA012 "Precal. PLA Todo"
#define MSG_PREHEAT_PLA_BEDONLY "Precal. PLA Base"
#define MSG_PREHEAT_PLA_SETTINGS "Ajustar temp. PLA"
#define MSG_PREHEAT_ABS "Precalentar ABS"
#define MSG_PREHEAT_ABS0 "Precalentar ABS 1"
#define MSG_PREHEAT_ABS1 "Precalentar ABS 2"
#define MSG_PREHEAT_ABS2 "Precalentar ABS 3"
#define MSG_PREHEAT_ABS012 "Precal. ABS Todo"
#define MSG_PREHEAT_ABS_BEDONLY "Precal. ABS Base"
#define MSG_PREHEAT_ABS_SETTINGS "Ajustar temp. ABS"
#define MSG_COOLDOWN "Enfriar"
#define MSG_SWITCH_PS_ON "Encender"
#define MSG_SWITCH_PS_OFF "Apagar"
#define MSG_EXTRUDE "Extruir"
#define MSG_RETRACT "Retraer"
#define MSG_MOVE_AXIS "Mover ejes"
#define MSG_MOVE_X "Mover X"
#define MSG_MOVE_Y "Mover Y"
#define MSG_MOVE_Z "Mover Z"
#define MSG_MOVE_E "Extrusor"
#define MSG_MOVE_E1 "Extrusor2"
#define MSG_MOVE_E2 "Extrusor3"
#define MSG_MOVE_01MM "Mover 0.1mm"
#define MSG_MOVE_1MM "Mover 1mm"
#define MSG_MOVE_10MM "Mover 10mm"
#define MSG_SPEED "Velocidad"
#define MSG_NOZZLE "Nozzle"
#define MSG_NOZZLE1 "Nozzle2"
#define MSG_NOZZLE2 "Nozzle3"
#define MSG_BED "Base"
#define MSG_FAN_SPEED "Ventilador"
#define MSG_FLOW "Flujo"
#define MSG_FLOW0 "Flujo 0"
#define MSG_FLOW1 "Flujo 1"
#define MSG_FLOW2 "Flujo 2"
#define MSG_CONTROL "Control"
#define MSG_MIN "\002 Min"
#define MSG_MAX "\002 Max"
#define MSG_FACTOR "\002 Fact"
#define MSG_AUTOTEMP "Autotemp"
#define MSG_ON "On"
#define MSG_OFF "Off"
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_ACC "Acel"
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX "Vmax"
#define MSG_X "x"
#define MSG_Y "y"
#define MSG_Z "z"
#define MSG_E "e"
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "Vvacio min"
#define MSG_AMAX "Amax"
#define MSG_A_RETRACT "A-retrac."
#define MSG_XSTEPS "X pasos/mm"
#define MSG_YSTEPS "Y pasos/mm"
#define MSG_ZSTEPS "Z pasos/mm"
#define MSG_ESTEPS "E pasos/mm"
#define MSG_TEMPERATURE "Temperatura"
#define MSG_MOTION "Movimiento"
#define MSG_CONTRAST "Contraste"
#define MSG_STORE_EPROM "Guardar memoria"
#define MSG_LOAD_EPROM "Cargar memoria"
#define MSG_RESTORE_FAILSAFE "Rest. de emergen."
#define MSG_REFRESH "Volver a cargar"
#define MSG_WATCH "Monitorizar"
#define MSG_PREPARE "Preparar"
#define MSG_TUNE "Ajustar"
#define MSG_PAUSE_PRINT "Pausar impresion"
#define MSG_RESUME_PRINT "Reanudar impres."
#define MSG_STOP_PRINT "Detener impresion"
#define MSG_CARD_MENU "Menu de SD"
#define MSG_NO_CARD "No hay tarjeta SD"
#define MSG_DWELL "Reposo..."
#define MSG_USERWAIT "Esperando ordenes"
#define MSG_RESUMING "Resumiendo impre."
#define MSG_PRINT_ABORTED "Print aborted"
#define MSG_NO_MOVE "Sin movimiento"
#define MSG_KILLED "PARADA DE EMERG."
#define MSG_STOPPED "PARADA"
#define MSG_CONTROL_RETRACT "Retraer mm"
#define MSG_CONTROL_RETRACT_SWAP "Interc. Retraer mm"
#define MSG_CONTROL_RETRACTF "Retraer V"
#define MSG_CONTROL_RETRACT_ZLIFT "Levantar mm"
#define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Interc. DesRet +mm"
#define MSG_CONTROL_RETRACT_RECOVERF "DesRet V"
#define MSG_AUTORETRACT "AutoRetr."
#define MSG_FILAMENTCHANGE "Cambiar filamento"
#define MSG_INIT_SDCARD "Iniciando tarjeta"
#define MSG_CNG_SDCARD "Cambiar tarjeta"
#define MSG_ZPROBE_OUT "sonda Z fuera"
#define MSG_POSITION_UNKNOWN "Reiniciar X/Y y Z"
#define MSG_ZPROBE_ZOFFSET "Offset Z"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
#define MSG_RECTRACT "Retraer"
#define MSG_RECTRACT_WIDE "Retraer"
#define MSG_TEMPERATURE_WIDE "Temperatura"
#define MSG_TEMPERATURE_RTN "Temperatura"
#define MSG_MAIN_WIDE "Menu principal"
#define MSG_MOTION_WIDE "Movimiento"
#define MSG_PREPARE_ALT "Preparar"
#define MSG_CONTROL_ARROW "Control \x7E"
#define MSG_RETRACT_ARROW "Retraer \x7E"
#define MSG_STEPPER_RELEASED "Desacoplada."
#endif // LANGUAGE_ES_H
MarlinKimbra/language_eu.h 0 → 100644
View file @ d93c1b1b
/**
* Basque-Euskera
*
* LCD Menu Messages
* Please note these are limited to 17 characters!
*
*/
#ifndef LANGUAGE_EU_H
#define LANGUAGE_EU_H
#define WELCOME_MSG MACHINE_NAME " prest."
#define MSG_SD_INSERTED "Txartela sartuta"
#define MSG_SD_REMOVED "Txartela kenduta"
#define MSG_MAIN "Menu nagusia"
#define MSG_AUTOSTART "Auto hasiera"
#define MSG_DISABLE_STEPPERS "Itzali motoreak"
#define MSG_AUTO_HOME "Hasierara joan"
#define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Hasiera ipini"
#define MSG_PREHEAT_PLA "Aurreberotu PLA"
#define MSG_PREHEAT_PLA0 "Aurreberotu PLA1"
#define MSG_PREHEAT_PLA1 "Aurreberotu PLA2"
#define MSG_PREHEAT_PLA2 "Aurreberotu PLA3"
#define MSG_PREHEAT_PLA012 "Berotu PLA Guztia"
#define MSG_PREHEAT_PLA_BEDONLY "Berotu PLA Ohea"
#define MSG_PREHEAT_PLA_SETTINGS "Berotu PLA Konfig"
#define MSG_PREHEAT_ABS "Aurreberotu ABS"
#define MSG_PREHEAT_ABS0 "Aurreberotu ABS 1"
#define MSG_PREHEAT_ABS1 "Aurreberotu ABS 2"
#define MSG_PREHEAT_ABS2 "Aurreberotu ABS 3"
#define MSG_PREHEAT_ABS012 "Berotu ABS Guztia"
#define MSG_PREHEAT_ABS_BEDONLY "Berotu ABS Ohea"
#define MSG_PREHEAT_ABS_SETTINGS "Berotu ABS Konfig"
#define MSG_COOLDOWN "Hoztu"
#define MSG_SWITCH_PS_ON "Energia piztu"
#define MSG_SWITCH_PS_OFF "Energia itzali"
#define MSG_EXTRUDE "Estruitu"
#define MSG_RETRACT "Atzera eragin"
#define MSG_MOVE_AXIS "Ardatzak mugitu"
#define MSG_MOVE_X "Mugitu X"
#define MSG_MOVE_Y "Mugitu Y"
#define MSG_MOVE_Z "Mugitu Z"
#define MSG_MOVE_E "Estrusorea"
#define MSG_MOVE_E1 "Estrusorea2"
#define MSG_MOVE_E2 "Estrusorea3"
#define MSG_MOVE_01MM "Mugitu 0.1mm"
#define MSG_MOVE_1MM "Mugitu 1mm"
#define MSG_MOVE_10MM "Mugitu 10mm"
#define MSG_SPEED "Abiadura"
#define MSG_NOZZLE "Pita"
#define MSG_NOZZLE1 "Pita2"
#define MSG_NOZZLE2 "Pita3"
#define MSG_BED "Ohea"
#define MSG_FAN_SPEED "Haizagailua"
#define MSG_FLOW "Fluxua"
#define MSG_FLOW0 "Fluxua 0"
#define MSG_FLOW1 "Fluxua 1"
#define MSG_FLOW2 "Fluxua 2"
#define MSG_CONTROL "Kontrola"
#define MSG_MIN " \002 Min"
#define MSG_MAX " \002 Max"
#define MSG_FACTOR " \002 Faktorea"
#define MSG_AUTOTEMP "Auto tenperatura"
#define MSG_ON "On "
#define MSG_OFF "Off"
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_ACC "Azelerazioa"
#define MSG_VXY_JERK "Vxy-astindua"
#define MSG_VZ_JERK "Vz-astindua"
#define MSG_VE_JERK "Ve-astindua"
#define MSG_VMAX "Vmax "
#define MSG_X "x"
#define MSG_Y "y"
#define MSG_Z "z"
#define MSG_E "e"
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "VTrav min"
#define MSG_AMAX "Amax "
#define MSG_A_RETRACT "A-retrakt"
#define MSG_XSTEPS "X pausoak/mm"
#define MSG_YSTEPS "Y pausoak/mm"
#define MSG_ZSTEPS "Z pausoak/mm"
#define MSG_ESTEPS "E pausoak/mm"
#define MSG_TEMPERATURE "Tenperatura"
#define MSG_MOTION "Mugimendua"
#define MSG_CONTRAST "LCD kontrastea"
#define MSG_STORE_EPROM "Gorde memoria"
#define MSG_LOAD_EPROM "Kargatu memoria"
#define MSG_RESTORE_FAILSAFE "Larri. berriz."
#define MSG_REFRESH "Berriz kargatu"
#define MSG_WATCH "Pantaila info"
#define MSG_PREPARE "Prestatu"
#define MSG_TUNE "Doitu"
#define MSG_PAUSE_PRINT "Pausatu inprimak."
#define MSG_RESUME_PRINT "Jarraitu inprima."
#define MSG_STOP_PRINT "Gelditu inprima."
#define MSG_CARD_MENU "SD-tik inprimatu"
#define MSG_NO_CARD "Ez dago txartelik"
#define MSG_DWELL "Lo egin..."
#define MSG_USERWAIT "Aginduak zain..."
#define MSG_RESUMING "Jarraitzen inpri."
#define MSG_PRINT_ABORTED "Print aborted"
#define MSG_NO_MOVE "Mugimendu gabe"
#define MSG_KILLED "LARRIALDI GELDIA"
#define MSG_STOPPED "GELDITUTA. "
#define MSG_CONTROL_RETRACT "Atzera egin mm"
#define MSG_CONTROL_RETRACT_SWAP "Swap Atzera egin mm"
#define MSG_CONTROL_RETRACTF "Atzera egin V"
#define MSG_CONTROL_RETRACT_ZLIFT "Igo mm"
#define MSG_CONTROL_RETRACT_RECOVER "Atzera egin +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Swap Atzera egin +mm"
#define MSG_CONTROL_RETRACT_RECOVERF "Atzera egin V"
#define MSG_AUTORETRACT "Atzera egin"
#define MSG_FILAMENTCHANGE "Aldatu filament."
#define MSG_INIT_SDCARD "Hasieratu txartela"
#define MSG_CNG_SDCARD "Aldatu txartela"
#define MSG_ZPROBE_OUT "Z ohe hasiera"
#define MSG_POSITION_UNKNOWN "Posizio ezezaguna"
#define MSG_ZPROBE_ZOFFSET "Z konpentsatu"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop deuseztat"
#define MSG_RECTRACT "Atzera eragin"
#endif // LANGUAGE_EU_H
MarlinKimbra/language_fi.h 0 → 100644
View file @ d93c1b1b
/**
* Finnish
*
* LCD Menu Messages
* Please note these are limited to 17 characters!
*
*/
#ifndef LANGUAGE_FI_H
#define LANGUAGE_FI_H
#define WELCOME_MSG MACHINE_NAME " valmis."
#define MSG_SD_INSERTED "Kortti asetettu"
#define MSG_SD_REMOVED "Kortti poistettu"
#define MSG_MAIN "Palaa"
#define MSG_AUTOSTART "Automaatti"
#define MSG_DISABLE_STEPPERS "Vapauta moottorit"
#define MSG_AUTO_HOME "Aja referenssiin"
#define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Aseta origo"
#define MSG_PREHEAT_PLA "Esilammita PLA"
#define MSG_PREHEAT_PLA0 "Esilammita PLA 1"
#define MSG_PREHEAT_PLA1 "Esilammita PLA 2"
#define MSG_PREHEAT_PLA2 "Esilammita PLA 3"
#define MSG_PREHEAT_PLA012 "Esila. PLA Kaikki"
#define MSG_PREHEAT_PLA_BEDONLY "Esila. PLA Alusta"
#define MSG_PREHEAT_PLA_SETTINGS "Esilamm. PLA konf"
#define MSG_PREHEAT_ABS "Esilammita ABS"
#define MSG_PREHEAT_ABS0 "Esilammita ABS 1"
#define MSG_PREHEAT_ABS1 "Esilammita ABS 2"
#define MSG_PREHEAT_ABS2 "Esilammita ABS 3"
#define MSG_PREHEAT_ABS012 "Esila. ABS Kaikki"
#define MSG_PREHEAT_ABS_BEDONLY "Esila. ABS Alusta"
#define MSG_PREHEAT_ABS_SETTINGS "Esilamm. ABS konf"
#define MSG_COOLDOWN "Jaahdyta"
#define MSG_SWITCH_PS_ON "Virta paalle"
#define MSG_SWITCH_PS_OFF "Virta pois"
#define MSG_EXTRUDE "Pursota"
#define MSG_RETRACT "Veda takaisin"
#define MSG_MOVE_AXIS "Liikuta akseleita"
#define MSG_MOVE_X "Move X"
#define MSG_MOVE_Y "Move Y"
#define MSG_MOVE_Z "Move Z"
#define MSG_MOVE_E "Extruder"
#define MSG_MOVE_E1 "Extruder2"
#define MSG_MOVE_E2 "Extruder3"
#define MSG_MOVE_01MM "Move 0.1mm"
#define MSG_MOVE_1MM "Move 1mm"
#define MSG_MOVE_10MM "Move 10mm"
#define MSG_SPEED "Nopeus"
#define MSG_NOZZLE "Suutin"
#define MSG_NOZZLE1 "Suutin2"
#define MSG_NOZZLE2 "Suutin3"
#define MSG_BED "Alusta"
#define MSG_FAN_SPEED "Tuul. nopeus"
#define MSG_FLOW "Virtaus"
#define MSG_FLOW0 "Virtaus 0"
#define MSG_FLOW1 "Virtaus 1"
#define MSG_FLOW2 "Virtaus 2"
#define MSG_CONTROL "Kontrolli"
#define MSG_MIN " \002 Min"
#define MSG_MAX " \002 Max"
#define MSG_FACTOR " \002 Kerr"
#define MSG_AUTOTEMP "Autotemp"
#define MSG_ON "On "
#define MSG_OFF "Off"
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_ACC "Kiihtyv"
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX "Vmax "
#define MSG_X "x"
#define MSG_Y "y"
#define MSG_Z "z"
#define MSG_E "e"
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "VLiike min"
#define MSG_AMAX "Amax "
#define MSG_A_RETRACT "A-peruuta"
#define MSG_XSTEPS "Xsteps/mm"
#define MSG_YSTEPS "Ysteps/mm"
#define MSG_ZSTEPS "Zsteps/mm"
#define MSG_ESTEPS "Esteps/mm"
#define MSG_TEMPERATURE "Lampotila"
#define MSG_MOTION "Liike"
#define MSG_CONTRAST "LCD contrast"
#define MSG_STORE_EPROM "Tallenna muistiin"
#define MSG_LOAD_EPROM "Lataa muistista"
#define MSG_RESTORE_FAILSAFE "Palauta oletus"
#define MSG_REFRESH "Paivita"
#define MSG_WATCH "Seuraa"
#define MSG_PREPARE "Valmistele"
#define MSG_TUNE "Saada"
#define MSG_PAUSE_PRINT "Keskeyta tulostus"
#define MSG_RESUME_PRINT "Jatka tulostusta"
#define MSG_STOP_PRINT "Pysayta tulostus"
#define MSG_CARD_MENU "Korttivalikko"
#define MSG_NO_CARD "Ei korttia"
#define MSG_DWELL "Nukkumassa..."
#define MSG_USERWAIT "Odotet. valintaa"
#define MSG_RESUMING "Jatke. tulostusta"
#define MSG_PRINT_ABORTED "Print aborted"
#define MSG_NO_MOVE "Ei liiketta."
#define MSG_KILLED "KILLED. "
#define MSG_STOPPED "STOPPED. "
#define MSG_CONTROL_RETRACT "Veda mm"
#define MSG_CONTROL_RETRACT_SWAP "Va. Veda mm"
#define MSG_CONTROL_RETRACTF "Veda V"
#define MSG_CONTROL_RETRACT_ZLIFT "Z mm"
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Va. UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
#define MSG_AUTORETRACT "AutoVeto."
#define MSG_FILAMENTCHANGE "Change filament"
#define MSG_INIT_SDCARD "Init. SD-Card"
#define MSG_CNG_SDCARD "Change SD-Card"
#define MSG_ZPROBE_OUT "Z probe out. bed"
#define MSG_POSITION_UNKNOWN "Home X/Y before Z"
#define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
#define MSG_RECTRACT "Veda takaisin"
#endif // LANGUAGE_FI_H
MarlinKimbra/language_fr.h 0 → 100644
View file @ d93c1b1b
/**
* French
*
* LCD Menu Messages
* Please note these are limited to 17 characters!
*
*/
#ifndef LANGUAGE_FR_H
#define LANGUAGE_FR_H
#define WELCOME_MSG MACHINE_NAME " prete."
#define MSG_SD_INSERTED "Carte inseree"
#define MSG_SD_REMOVED "Carte retiree"
#define MSG_MAIN "Menu principal"
#define MSG_AUTOSTART "Demarrage auto"
#define MSG_DISABLE_STEPPERS "Arreter moteurs"
#define MSG_AUTO_HOME "Home auto."
#define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Regler origine"
#define MSG_PREHEAT_PLA "Prechauffage PLA"
#define MSG_PREHEAT_PLA0 "Prechauff. PLA 1"
#define MSG_PREHEAT_PLA1 "Prechauff. PLA 2"
#define MSG_PREHEAT_PLA2 "Prechauff. PLA 3"
#define MSG_PREHEAT_PLA012 "Prech. PLA Tout"
#define MSG_PREHEAT_PLA_BEDONLY "Prech. PLA Plateau"
#define MSG_PREHEAT_PLA_SETTINGS "Regl. prech. PLA"
#define MSG_PREHEAT_ABS "Prechauffage ABS"
#define MSG_PREHEAT_ABS0 "Prechauff. ABS 1"
#define MSG_PREHEAT_ABS1 "Prechauff. ABS 2"
#define MSG_PREHEAT_ABS2 "Prechauff. ABS 3"
#define MSG_PREHEAT_ABS012 "Prech. ABS Tout"
#define MSG_PREHEAT_ABS_BEDONLY "Prech. ABS Plateau"
#define MSG_PREHEAT_ABS_SETTINGS "Regl. prech. ABS"
#define MSG_COOLDOWN "Refroidir"
#define MSG_SWITCH_PS_ON "Allumer alim."
#define MSG_SWITCH_PS_OFF "Eteindre alim."
#define MSG_EXTRUDE "Extrusion"
#define MSG_RETRACT "Retraction"
#define MSG_MOVE_AXIS "Deplacer un axe"
#define MSG_MOVE_X "Move X"
#define MSG_MOVE_Y "Move Y"
#define MSG_MOVE_Z "Move Z"
#define MSG_MOVE_E "Extruder"
#define MSG_MOVE_E1 "Extruder2"
#define MSG_MOVE_E2 "Extruder3"
#define MSG_MOVE_01MM "Move 0.1mm"
#define MSG_MOVE_1MM "Move 1mm"
#define MSG_MOVE_10MM "Move 10mm"
#define MSG_SPEED " Vitesse"
#define MSG_NOZZLE "Buse"
#define MSG_NOZZLE1 "Buse2"
#define MSG_NOZZLE2 "Buse3"
#define MSG_BED "Plateau"
#define MSG_FAN_SPEED "Vite. ventilateur"
#define MSG_FLOW "Flux"
#define MSG_FLOW0 "Flux 0"
#define MSG_FLOW1 "Flux 1"
#define MSG_FLOW2 "Flux 2"
#define MSG_CONTROL "Controler"
#define MSG_MIN " \002 Min"
#define MSG_MAX " \002 Max"
#define MSG_FACTOR " \002 Facteur"
#define MSG_AUTOTEMP "Temp. Auto."
#define MSG_ON "Marche "
#define MSG_OFF "Arret"
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_ACC "Accel"
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX "Vmax"
#define MSG_X "x"
#define MSG_Y "y"
#define MSG_Z "z"
#define MSG_E "e"
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "Vdepl min"
#define MSG_AMAX "Amax "
#define MSG_A_RETRACT "A-retract"
#define MSG_XSTEPS "Xpas/mm"
#define MSG_YSTEPS "Ypas/mm"
#define MSG_ZSTEPS "Zpas/mm"
#define MSG_ESTEPS "Epas/mm"
#define MSG_TEMPERATURE "Temperature"
#define MSG_MOTION "Mouvement"
#define MSG_CONTRAST "Contraste LCD"
#define MSG_STORE_EPROM "Sauver config"
#define MSG_LOAD_EPROM "Lire config"
#define MSG_RESTORE_FAILSAFE "Restaurer defauts"
#define MSG_REFRESH "Actualiser"
#define MSG_WATCH "Surveiller"
#define MSG_PREPARE "Preparer"
#define MSG_TUNE "Regler"
#define MSG_PAUSE_PRINT "Interrompre impr."
#define MSG_RESUME_PRINT "Reprendre impr."
#define MSG_STOP_PRINT "Arreter impr."
#define MSG_CARD_MENU "Impr. depuis SD"
#define MSG_NO_CARD "Pas de carte"
#define MSG_DWELL "Repos..."
#define MSG_USERWAIT "Atten. de l'util."
#define MSG_RESUMING "Repri. de l'impr."
#define MSG_PRINT_ABORTED "Print aborted"
#define MSG_NO_MOVE "Aucun mouvement."
#define MSG_KILLED "MORT."
#define MSG_STOPPED "STOPPE."
#define MSG_CONTROL_RETRACT "Retraction mm"
#define MSG_CONTROL_RETRACT_SWAP "Ech. Retr. mm"
#define MSG_CONTROL_RETRACTF "Retraction V"
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Ech. UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
#define MSG_AUTORETRACT "Retract. Auto."
#define MSG_FILAMENTCHANGE "Changer filament"
#define MSG_INIT_SDCARD "Init. la carte SD"
#define MSG_CNG_SDCARD "Changer de carte"
#define MSG_ZPROBE_OUT "Z sonde exte. lit"
#define MSG_POSITION_UNKNOWN "Rev. dans XY av.Z"
#define MSG_ZPROBE_ZOFFSET "Offset Z"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Butee abandon"
#define MSG_RECTRACT "Rectract"
#define MSG_STEPPER_RELEASED "RELACHE."
#endif // LANGUAGE_FR_H
MarlinKimbra/language_it.h 0 → 100644
View file @ d93c1b1b
/**
* Italian
*
* LCD Menu Messages
* Please note these are limited to 17 characters!
*
*/
#ifndef LANGUAGE_IT_H
#define LANGUAGE_IT_H
#define WELCOME_MSG MACHINE_NAME " pronta."
#define MSG_SD_INSERTED "SD Card inserita"
#define MSG_SD_REMOVED "SD Card rimossa"
#define MSG_MAIN "Menu principale"
#define MSG_AUTOSTART "Autostart"
#define MSG_DISABLE_STEPPERS "Disabilita Motori"
#define MSG_AUTO_HOME "Auto Home"
#define MSG_BED_SETTING "Bed Setting"
#define MSG_SET_ORIGIN "Imposta Origine"
#define MSG_PREHEAT_PLA "Preriscalda PLA"
#define MSG_PREHEAT_PLA0 "Preriscalda PLA 1"
#define MSG_PREHEAT_PLA1 "Preriscalda PLA 2"
#define MSG_PREHEAT_PLA2 "Preriscalda PLA 3"
#define MSG_PREHEAT_PLA3 "Preriscalda PLA 4"
#define MSG_PREHEAT_PLA0123 "Preris. PLA Tutto"
#define MSG_PREHEAT_PLA_BEDONLY "Preri. PLA Piatto"
#define MSG_PREHEAT_PLA_SETTINGS "Preris. PLA Conf"
#define MSG_PREHEAT_ABS "Preriscalda ABS"
#define MSG_PREHEAT_ABS0 "Preriscalda ABS 1"
#define MSG_PREHEAT_ABS1 "Preriscalda ABS 2"
#define MSG_PREHEAT_ABS2 "Preriscalda ABS 3"
#define MSG_PREHEAT_ABS3 "Preriscalda ABS 4"
#define MSG_PREHEAT_ABS0123 "Preris. ABS Tutto"
#define MSG_PREHEAT_ABS_BEDONLY "Preri. ABS Piatto"
#define MSG_PREHEAT_ABS_SETTINGS "Preris. ABS Conf"
#define MSG_PREHEAT_GUM "Preriscalda GOMMA"
#define MSG_PREHEAT_GUM0 "Preriscalda GOMMA 1"
#define MSG_PREHEAT_GUM1 "Preriscalda GOMMA 2"
#define MSG_PREHEAT_GUM2 "Preriscalda GOMMA 3"
#define MSG_PREHEAT_GUM3 "Preriscalda GOMMA 4"
#define MSG_PREHEAT_GUM_BEDONLY "Preri. GOMMA Piatto"
#define MSG_PREHEAT_GUM_SETTINGS "Preris. GOMMA Conf"
#define MSG_COOLDOWN "Raffredda"
#define MSG_SWITCH_PS_ON "Switch Power On"
#define MSG_SWITCH_PS_OFF "Switch Power Off"
#define MSG_EXTRUDE "Estrudi"
#define MSG_RETRACT "Ritrai"
#define MSG_MOVE_AXIS "Muovi Asse"
#define MSG_MOVE_X "Move X"
#define MSG_MOVE_Y "Move Y"
#define MSG_MOVE_Z "Move Z"
#define MSG_MOVE_E "Extruder"
#define MSG_MOVE_E1 "Extruder2"
#define MSG_MOVE_E2 "Extruder3"
#define MSG_MOVE_E3 "Extruder4"
#define MSG_MOVE_01MM "Move 0.1mm"
#define MSG_MOVE_1MM "Move 1mm"
#define MSG_MOVE_10MM "Move 10mm"
#define MSG_SPEED "Velcità"
#define MSG_NOZZLE "Ugello"
#define MSG_NOZZLE1 "Ugello2"
#define MSG_NOZZLE2 "Ugello3"
#define MSG_NOZZLE3 "Ugello4"
#define MSG_BED "Piatto"
#define MSG_FAN_SPEED "Ventola"
#define MSG_FLOW "Flusso"
#define MSG_FLOW0 "Flusso 0"
#define MSG_FLOW1 "Flusso 1"
#define MSG_FLOW2 "Flusso 2"
#define MSG_FLOW3 "Flusso 3"
#define MSG_CONTROL "Controllo"
#define MSG_MIN " \002 Min:"
#define MSG_MAX " \002 Max:"
#define MSG_FACTOR " \002 Fact:"
#define MSG_AUTOTEMP "Autotemp"
#define MSG_ON "On "
#define MSG_OFF "Off"
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_ACC "Accel"
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX "Vmax"
#define MSG_X "x"
#define MSG_Y "y"
#define MSG_Z "z"
#define MSG_E "e"
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "VTrav min"
#define MSG_AMAX "Amax"
#define MSG_A_RETRACT "A-retract"
#define MSG_XSTEPS "Xpassi/mm"
#define MSG_YSTEPS "Ypassi/mm"
#define MSG_ZSTEPS "Zpassi/mm"
#define MSG_E0STEPS "E0steps/mm"
#define MSG_E1STEPS "E1steps/mm"
#define MSG_E2STEPS "E2steps/mm"
#define MSG_E3STEPS "E3steps/mm"
#define MSG_TEMPERATURE "Temperatura"
#define MSG_MOTION "Movimento"
#define MSG_CONTRAST "LCD contrast"
#define MSG_STORE_EPROM "Salva in EEPROM"
#define MSG_LOAD_EPROM "Carica da EEPROM"
#define MSG_RESTORE_FAILSAFE "Impostaz. default"
#define MSG_REFRESH "Aggiorna"
#define MSG_WATCH "Guarda"
#define MSG_PREPARE "Prepara"
#define MSG_TUNE "Adatta"
#define MSG_PAUSE_PRINT "Pausa"
#define MSG_RESUME_PRINT "Riprendi Stampa"
#define MSG_STOP_PRINT "Arresta Stampa"
#define MSG_CARD_MENU "SD Card Menu"
#define MSG_NO_CARD "No SD Card"
#define MSG_DWELL "Sospensione..."
#define MSG_USERWAIT "Attendi Utente..."
#define MSG_RESUMING "Riprendi Stampa"
#define MSG_PRINT_ABORTED "Print aborted"
#define MSG_NO_MOVE "Nessun Movimento."
#define MSG_KILLED "UCCISO. "
#define MSG_STOPPED "ARRESTATO. "
#define MSG_CONTROL_RETRACT "Ritrai mm"
#define MSG_CONTROL_RETRACT_SWAP "Scamb. Ritrai mm"
#define MSG_CONTROL_RETRACTF "Ritrai V"
#define MSG_CONTROL_RETRACT_ZLIFT "Salta mm"
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Scamb. UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
#define MSG_AUTORETRACT "AutoArretramento"
#define MSG_FILAMENTCHANGE "Cambia filamento"
#define MSG_INIT_SDCARD "Iniz. SD-Card"
#define MSG_CNG_SDCARD "Cambia SD-Card"
#define MSG_ZPROBE_OUT "Z probe out. bed"
#define MSG_POSITION_UNKNOWN "Home X/Y before Z"
#define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
#define MSG_RECTRACT "Ritrai"
#define MSG_LASER "Laser Preset"
#define MSG_CONFIG "Configurazione"
#define MSG_BAUDRATE "Baudrate"
#ifdef FIRMWARE_TEST
#define MSG_FWTEST_YES "Dai il comando Y per andare avanti"
#define MSG_FWTEST_NO "Dai il comando N per andare avanti"
#define MSG_FWTEST_YES_NO "Dai il comando Y o N per andare avanti"
#define MSG_FWTEST_ENDSTOP_ERR "ENDSTOP ERROR! Controllare cavi e connessioni"
#define MSG_FWTEST_PRESS "Premere e tenere premuto l'endstop "
#define MSG_FWTEST_INVERT "Invertire valore in "
#define MSG_FWTEST_XAXIS "Il nozzle si e' spostato a destra?"
#define MSG_FWTEST_YAXIS "Il nozzle si e' spostato in avanti"
#define MSG_FWTEST_ZAXIS "Il nozzle si e' spostato in alto"
#define MSG_FWTEST_01 "Muovi manualmente gli assi X, Y e Z lontano dagli endstop"
#define MSG_FWTEST_02 "Vuoi controllare gli ENDSTOP?"
#define MSG_FWTEST_03 "Inizio controllo ENDSTOP"
#define MSG_FWTEST_04 "Inizio controllo MOTORI"
#define MSG_FWTEST_ATTENTION "ATTENZIONE! Controlla che i tre assi siano a piu' di 5 mm dagli endstop!"
#endif // FIRMWARE_TEST
#endif // LANGUAGE_IT_H
MarlinKimbra/language_nl.h 0 → 100644
View file @ d93c1b1b
/**
* Dutch
*
* LCD Menu Messages
* Please note these are limited to 17 characters!
*
*/
#ifndef LANGUAGE_NL_H
#define LANGUAGE_NL_H
#define WELCOME_MSG MACHINE_NAME " gereed."
#define MSG_SD_INSERTED "Kaart ingestoken"
#define MSG_SD_REMOVED "Kaart verwijderd"
#define MSG_MAIN "Main"
#define MSG_AUTOSTART "Autostart"
#define MSG_DISABLE_STEPPERS "Motoren uit"
#define MSG_AUTO_HOME "Auto home"
#define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Nulpunt instellen"
#define MSG_PREHEAT_PLA "PLA voorverwarmen"
#define MSG_PREHEAT_PLA0 "PLA voorverw. 0"
#define MSG_PREHEAT_PLA1 "PLA voorverw. 1"
#define MSG_PREHEAT_PLA2 "PLA voorverw. 2"
#define MSG_PREHEAT_PLA012 "PLA voorverw. aan"
#define MSG_PREHEAT_PLA_BEDONLY "PLA voorverw. Bed"
#define MSG_PREHEAT_PLA_SETTINGS "PLA verw. conf"
#define MSG_PREHEAT_ABS "ABS voorverwarmen"
#define MSG_PREHEAT_ABS0 "ABS voorverw. 0"
#define MSG_PREHEAT_ABS1 "ABS voorverw. 1"
#define MSG_PREHEAT_ABS2 "ABS voorverw. 2"
#define MSG_PREHEAT_ABS012 "ABS voorverw. aan"
#define MSG_PREHEAT_ABS_BEDONLY "ABS voorverw. Bed"
#define MSG_PREHEAT_ABS_SETTINGS "ABS verw. conf"
#define MSG_COOLDOWN "Afkoelen"
#define MSG_SWITCH_PS_ON "Stroom aan"
#define MSG_SWITCH_PS_OFF "Stroom uit"
#define MSG_EXTRUDE "Extrude"
#define MSG_RETRACT "Retract"
#define MSG_MOVE_AXIS "As verplaatsen"
#define MSG_MOVE_X "Verplaats X"
#define MSG_MOVE_Y "Verplaats Y"
#define MSG_MOVE_Z "Verplaats Z"
#define MSG_MOVE_E "Extruder"
#define MSG_MOVE_E1 "Extruder2"
#define MSG_MOVE_E2 "Extruder3"
#define MSG_MOVE_01MM "Verplaats 0.1mm"
#define MSG_MOVE_1MM "Verplaats 1mm"
#define MSG_MOVE_10MM "Verplaats 10mm"
#define MSG_SPEED "Snelheid"
#define MSG_NOZZLE "Nozzle"
#define MSG_NOZZLE1 "Nozzle2"
#define MSG_NOZZLE2 "Nozzle3"
#define MSG_BED "Bed"
#define MSG_FAN_SPEED "Fan snelheid"
#define MSG_FLOW "Flow"
#define MSG_FLOW0 "Flow 0"
#define MSG_FLOW1 "Flow 1"
#define MSG_FLOW2 "Flow 2"
#define MSG_CONTROL "Control"
#define MSG_MIN " \002 Min"
#define MSG_MAX " \002 Max"
#define MSG_FACTOR " \002 Fact"
#define MSG_AUTOTEMP "Autotemp"
#define MSG_ON "Aan "
#define MSG_OFF "Uit"
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_ACC "Versn"
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX "Vmax "
#define MSG_X "x"
#define MSG_Y "y"
#define MSG_Z "z"
#define MSG_E "e"
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "VTrav min"
#define MSG_AMAX "Amax "
#define MSG_A_RETRACT "A-retract"
#define MSG_XSTEPS "Xsteps/mm"
#define MSG_YSTEPS "Ysteps/mm"
#define MSG_ZSTEPS "Zsteps/mm"
#define MSG_ESTEPS "Esteps/mm"
#define MSG_TEMPERATURE "Temperatuur"
#define MSG_MOTION "Beweging"
#define MSG_CONTRAST "LCD contrast"
#define MSG_STORE_EPROM "Geheugen opslaan"
#define MSG_LOAD_EPROM "Geheugen laden"
#define MSG_RESTORE_FAILSAFE "Noodstop reset"
#define MSG_REFRESH "Ververs"
#define MSG_WATCH "Info scherm"
#define MSG_PREPARE "Voorbereiden"
#define MSG_TUNE "Afstellen"
#define MSG_PAUSE_PRINT "Print pauzeren"
#define MSG_RESUME_PRINT "Print hervatten"
#define MSG_STOP_PRINT "Print stoppen"
#define MSG_CARD_MENU "Print van SD"
#define MSG_NO_CARD "Geen SD kaart"
#define MSG_DWELL "Slapen..."
#define MSG_USERWAIT "Wachten..."
#define MSG_RESUMING "Print hervatten"
#define MSG_PRINT_ABORTED "Print aborted"
#define MSG_NO_MOVE "Geen beweging."
#define MSG_KILLED "AFGEBROKEN. "
#define MSG_STOPPED "GESTOPT. "
#define MSG_CONTROL_RETRACT "Retract mm"
#define MSG_CONTROL_RETRACT_SWAP "Ruil Retract mm"
#define MSG_CONTROL_RETRACTF "Retract F"
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Ruil UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
#define MSG_AUTORETRACT "AutoRetr."
#define MSG_FILAMENTCHANGE "Verv. Filament"
#define MSG_INIT_SDCARD "Init. SD kaart"
#define MSG_CNG_SDCARD "Verv. SD card"
#define MSG_ZPROBE_OUT "Z probe uit. bed"
#define MSG_POSITION_UNKNOWN "Home X/Y voor Z"
#define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystap X"
#define MSG_BABYSTEP_Y "Babystap Y"
#define MSG_BABYSTEP_Z "Babystap Z"
#define MSG_ENDSTOP_ABORT "Endstop afbr."
#define MSG_RECTRACT "Terugtrekken"
#endif // LANGUAGE_NL_H
MarlinKimbra/language_pl.h 0 → 100644
View file @ d93c1b1b
/**
* Polish
*
* LCD Menu Messages
* Please note these are limited to 17 characters!
*
*/
#ifndef LANGUAGE_PL_H
#define LANGUAGE_PL_H
#define WELCOME_MSG MACHINE_NAME " gotowy."
#define MSG_SD_INSERTED "Karta wlozona"
#define MSG_SD_REMOVED "Karta usunieta"
#define MSG_MAIN "Menu glowne"
#define MSG_AUTOSTART "Autostart"
#define MSG_DISABLE_STEPPERS "Wylacz silniki"
#define MSG_AUTO_HOME "Auto. poz. zerowa"
#define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Ustaw punkt zero"
#define MSG_PREHEAT_PLA "Rozgrzej PLA"
#define MSG_PREHEAT_PLA0 "Rozgrzej PLA 1"
#define MSG_PREHEAT_PLA1 "Rozgrzej PLA 2"
#define MSG_PREHEAT_PLA2 "Rozgrzej PLA 3"
#define MSG_PREHEAT_PLA012 "Roz. PLA Wszystko"
#define MSG_PREHEAT_PLA_BEDONLY "Rozgrzej PLA Loze"
#define MSG_PREHEAT_PLA_SETTINGS "Ustaw. rozg. PLA"
#define MSG_PREHEAT_ABS "Rozgrzej ABS"
#define MSG_PREHEAT_ABS0 "Rozgrzej ABS 1"
#define MSG_PREHEAT_ABS1 "Rozgrzej ABS 2"
#define MSG_PREHEAT_ABS2 "Rozgrzej ABS 3"
#define MSG_PREHEAT_ABS012 "Roz. ABS Wszystko"
#define MSG_PREHEAT_ABS_BEDONLY "Rozgrzej ABS Loze"
#define MSG_PREHEAT_ABS_SETTINGS "Ustaw. rozg. ABS"
#define MSG_COOLDOWN "Chlodzenie"
#define MSG_SWITCH_PS_ON "Wlacz zasilacz"
#define MSG_SWITCH_PS_OFF "Wylacz zasilacz"
#define MSG_EXTRUDE "Ekstruzja"
#define MSG_RETRACT "Cofanie"
#define MSG_MOVE_AXIS "Ruch osi"
#define MSG_MOVE_X "Przesun w X"
#define MSG_MOVE_Y "Przesun w Y"
#define MSG_MOVE_Z "Przesun w Z"
#define MSG_MOVE_E "Ekstruzja (os E)"
#define MSG_MOVE_E1 "Extruder2"
#define MSG_MOVE_E2 "Extruder3"
#define MSG_MOVE_01MM "Przesuwaj co .1mm"
#define MSG_MOVE_1MM "Przesuwaj co 1mm"
#define MSG_MOVE_10MM "Przesuwaj co 10mm"
#define MSG_SPEED "Predkosc"
#define MSG_NOZZLE "Dysza"
#define MSG_NOZZLE1 "Dysza 2"
#define MSG_NOZZLE2 "Dysza 3"
#define MSG_BED "Loze"
#define MSG_FAN_SPEED "Obroty wiatraka"
#define MSG_FLOW "Przeplyw"
#define MSG_FLOW0 "Przeplyw 0"
#define MSG_FLOW1 "Przeplyw 1"
#define MSG_FLOW2 "Przeplyw 2"
#define MSG_CONTROL "Ustawienia"
#define MSG_MIN " \002 Min"
#define MSG_MAX " \002 Max"
#define MSG_FACTOR " \002 Mnoznik"
#define MSG_AUTOTEMP "Auto. temperatura"
#define MSG_ON "Wl. "
#define MSG_OFF "Wyl."
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_ACC "Przyspieszenie"
#define MSG_VXY_JERK "Zryw Vxy"
#define MSG_VZ_JERK "Zryw Vz"
#define MSG_VE_JERK "Zryw Ve"
#define MSG_VMAX "Vmax"
#define MSG_X "x"
#define MSG_Y "y"
#define MSG_Z "z"
#define MSG_E "e"
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "Vskok min"
#define MSG_AMAX "Amax"
#define MSG_A_RETRACT "A-wycofanie"
#define MSG_XSTEPS "krokiX/mm"
#define MSG_YSTEPS "krokiY/mm"
#define MSG_ZSTEPS "krokiZ/mm"
#define MSG_ESTEPS "krokiE/mm"
#define MSG_TEMPERATURE "Temperatura"
#define MSG_MOTION "Ruch"
#define MSG_CONTRAST "Kontrast LCD"
#define MSG_STORE_EPROM "Zapisz w pamieci"
#define MSG_LOAD_EPROM "Wczytaj z pamieci"
#define MSG_RESTORE_FAILSAFE "Ustaw. fabryczne"
#define MSG_REFRESH "\004Odswiez"
#define MSG_WATCH "Ekran glowny"
#define MSG_PREPARE "Przygotuj"
#define MSG_TUNE "Strojenie"
#define MSG_PAUSE_PRINT "Pauza"
#define MSG_RESUME_PRINT "Wznowienie"
#define MSG_STOP_PRINT "Stop"
#define MSG_CARD_MENU "Menu karty SD"
#define MSG_NO_CARD "Brak karty"
#define MSG_DWELL "Uspij..."
#define MSG_USERWAIT "Oczekiwanie..."
#define MSG_RESUMING "Wznawianie druku"
#define MSG_PRINT_ABORTED "Print aborted"
#define MSG_NO_MOVE "Brak ruchu"
#define MSG_KILLED "Ubity. "
#define MSG_STOPPED "Zatrzymany. "
#define MSG_CONTROL_RETRACT "Wycofaj mm"
#define MSG_CONTROL_RETRACT_SWAP "Z Wycof. mm"
#define MSG_CONTROL_RETRACTF "Wycofaj V"
#define MSG_CONTROL_RETRACT_ZLIFT "Skok Z mm:"
#define MSG_CONTROL_RETRACT_RECOVER "Cof. wycof. +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Z Cof. wyc. +mm"
#define MSG_CONTROL_RETRACT_RECOVERF "Cof. wycof. V"
#define MSG_AUTORETRACT "Auto. wycofanie"
#define MSG_FILAMENTCHANGE "Zmien filament"
#define MSG_INIT_SDCARD "Inicjal. karty SD"
#define MSG_CNG_SDCARD "Zmiana karty SD"
#define MSG_ZPROBE_OUT "Sonda Z za lozem"
#define MSG_POSITION_UNKNOWN "Wroc w XY przed Z"
#define MSG_ZPROBE_ZOFFSET "Offset Z"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Blad wyl. kranc."
#define MSG_RECTRACT "Wycofanie"
#define MSG_STEPPER_RELEASED "Zwolniony."
#endif // LANGUAGE_PL_H
MarlinKimbra/language_pt.h 0 → 100644
View file @ d93c1b1b
/**
* Portuguese
*
* LCD Menu Messages
* Please note these are limited to 17 characters!
*
*/
#ifndef LANGUAGE_PT_H
#define LANGUAGE_PT_H
#define WELCOME_MSG MACHINE_NAME " pronto."
#define MSG_SD_INSERTED "Cartao inserido"
#define MSG_SD_REMOVED "Cartao removido"
#define MSG_MAIN " Menu principal \003"
#define MSG_AUTOSTART "Autostart"
#define MSG_DISABLE_STEPPERS " Apagar motores"
#define MSG_AUTO_HOME "Ir para origen"
#define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Estabelecer orig."
#define MSG_PREHEAT_PLA "Pre-aquecer PLA"
#define MSG_PREHEAT_PLA0 " pre-aquecer PLA 1"
#define MSG_PREHEAT_PLA1 " pre-aquecer PLA 2"
#define MSG_PREHEAT_PLA2 " pre-aquecer PLA 3"
#define MSG_PREHEAT_PLA012 " pre-aq. PLA Tudo"
#define MSG_PREHEAT_PLA_BEDONLY " pre-aq. PLA \002Base"
#define MSG_PREHEAT_PLA_SETTINGS "PLA setting"
#define MSG_PREHEAT_ABS "Pre-aquecer ABS"
#define MSG_PREHEAT_ABS0 " pre-aquecer ABS 1"
#define MSG_PREHEAT_ABS1 " pre-aquecer ABS 2"
#define MSG_PREHEAT_ABS2 " pre-aquecer ABS 3"
#define MSG_PREHEAT_ABS012 " pre-aq. ABS Tudo"
#define MSG_PREHEAT_ABS_BEDONLY " pre-aq. ABS \002Base"
#define MSG_PREHEAT_ABS_SETTINGS "ABS setting"
#define MSG_COOLDOWN "Esfriar"
#define MSG_SWITCH_PS_ON "Switch Power On"
#define MSG_SWITCH_PS_OFF "Switch Power Off"
#define MSG_EXTRUDE "Extrudar"
#define MSG_RETRACT "Retrair"
#define MSG_MOVE_AXIS "Mover eixo \x7E"
#define MSG_MOVE_X "Move X"
#define MSG_MOVE_Y "Move Y"
#define MSG_MOVE_Z "Move Z"
#define MSG_MOVE_E "Extruder"
#define MSG_MOVE_E1 "Extruder2"
#define MSG_MOVE_E2 "Extruder3"
#define MSG_MOVE_01MM "Move 0.1mm"
#define MSG_MOVE_1MM "Move 1mm"
#define MSG_MOVE_10MM "Move 10mm"
#define MSG_SPEED "Velocidade:"
#define MSG_NOZZLE "\002Nozzle:"
#define MSG_NOZZLE1 "\002Nozzle2:"
#define MSG_NOZZLE2 "\002Nozzle3:"
#define MSG_BED "\002Base:"
#define MSG_FAN_SPEED "Velocidade vento."
#define MSG_FLOW "Fluxo:"
#define MSG_FLOW0 "Fluxo0:"
#define MSG_FLOW1 "Fluxo1:"
#define MSG_FLOW2 "Fluxo2:"
#define MSG_CONTROL "Controle \003"
#define MSG_MIN "\002 Min:"
#define MSG_MAX "\002 Max:"
#define MSG_FACTOR "\002 Fact:"
#define MSG_AUTOTEMP "Autotemp:"
#define MSG_ON "On "
#define MSG_OFF "Off"
#define MSG_PID_P "PID-P: "
#define MSG_PID_I "PID-I: "
#define MSG_PID_D "PID-D: "
#define MSG_PID_C "PID-C: "
#define MSG_ACC "Acc:"
#define MSG_VXY_JERK "Vxy-jerk: "
#define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX " Vmax "
#define MSG_X "x:"
#define MSG_Y "y:"
#define MSG_Z "z:"
#define MSG_E "e:"
#define MSG_VMIN "Vmin:"
#define MSG_VTRAV_MIN "VTrav min:"
#define MSG_AMAX "Amax "
#define MSG_A_RETRACT "A-retract:"
#define MSG_XSTEPS "Xpasso/mm:"
#define MSG_YSTEPS "Ypasso/mm:"
#define MSG_ZSTEPS "Zpasso/mm:"
#define MSG_ESTEPS "Epasso/mm:"
#define MSG_TEMPERATURE "Temperatura"
#define MSG_MOTION "Movimento"
#define MSG_CONTRAST "Contrast"
#define MSG_STORE_EPROM "Guardar memoria"
#define MSG_LOAD_EPROM "Carregar memoria"
#define MSG_RESTORE_FAILSAFE "Rest. de emergen."
#define MSG_REFRESH "\004Recarregar"
#define MSG_WATCH "Monitorar \003"
#define MSG_PREPARE "Preparar \x7E"
#define MSG_TUNE "Tune \x7E"
#define MSG_PAUSE_PRINT "Pausar impressao"
#define MSG_RESUME_PRINT "Resumir impressao"
#define MSG_STOP_PRINT "Parar impressao"
#define MSG_CARD_MENU "Menu cartao SD"
#define MSG_NO_CARD "Sem cartao SD"
#define MSG_DWELL "Repouso..."
#define MSG_USERWAIT "Esperando ordem"
#define MSG_RESUMING "Resuming print"
#define MSG_PRINT_ABORTED "Print aborted"
#define MSG_NO_MOVE "Sem movimento"
#define MSG_KILLED "PARADA DE EMERG."
#define MSG_STOPPED "PARADA. "
#define MSG_CONTROL_RETRACT " Retrair mm:"
#define MSG_CONTROL_RETRACT_SWAP "Troca Retrair mm:"
#define MSG_CONTROL_RETRACTF " Retrair V:"
#define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:"
#define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Troca DesRet +mm:"
#define MSG_CONTROL_RETRACT_RECOVERF " DesRet V:"
#define MSG_AUTORETRACT " AutoRetr.:"
#define MSG_FILAMENTCHANGE "Change filament"
#define MSG_INIT_SDCARD "Init. SD-Card"
#define MSG_CNG_SDCARD "Change SD-Card"
#define MSG_ZPROBE_OUT "Son. fora da mesa"
#define MSG_POSITION_UNKNOWN "XY antes de Z"
#define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
#define MSG_RECTRACT "Retrair"
#define MSG_MAIN_WIDE "Menu Principal \003"
#define MSG_PREPARE_ALT "Preparar \003"
#define MSG_CONTROL_ARROW "Controle \x7E"
#define MSG_RETRACT_ARROW "Retrair \x7E"
#define MSG_STEPPER_RELEASED "Lancado."
#endif // LANGUAGE_PT_H
MarlinKimbra/language_ru.h 0 → 100644
View file @ d93c1b1b
This diff is collapsed.
MarlinKimbra/planner.cpp
View file @ d93c1b1b
......@@ -63,10 +63,10 @@
//===========================================================================
unsigned long minsegmenttime;
float max_feedrate[7]; // set the max speeds
float max_feedrate[NUM_AXIS]; // set the max speeds
float max_retraction_feedrate[4]; // set the max speeds for retraction
float axis_steps_per_unit[7];
unsigned long max_acceleration_units_per_sq_second[4]; // Use M201 to override by software
float axis_steps_per_unit[NUM_AXIS];
unsigned long max_acceleration_units_per_sq_second[NUM_AXIS]; // Use M201 to override by software
float minimumfeedrate;
float acceleration; // Normal acceleration mm/s^2 THIS IS THE DEFAULT ACCELERATION for all moves. M204 SXXXX
float retract_acceleration; // mm/s^2 filament pull-pack and push-forward while standing still in the other axis M204 TXXXX
......@@ -1050,7 +1050,7 @@ block->steps_y = labs((target[X_AXIS]-position[X_AXIS]) - (target[Y_AXIS]-positi
else {
long acc_dist = estimate_acceleration_distance(0, block->nominal_rate, block->acceleration_st);
float advance = (STEPS_PER_CUBIC_MM_E * EXTRUDER_ADVANCE_K) *
(current_speed[E_AXIS] * current_speed[E_AXIS] * EXTRUTION_AREA * EXTRUTION_AREA)*256;
(current_speed[E_AXIS] * current_speed[E_AXIS] * EXTRUSION_AREA * EXTRUSION_AREA)*256;
block->advance = advance;
if(acc_dist == 0) {
block->advance_rate = 0;
......
MarlinKimbra/planner.h
View file @ d93c1b1b
......@@ -110,10 +110,10 @@ void check_axes_activity();
uint8_t movesplanned(); //return the nr of buffered moves
extern unsigned long minsegmenttime;
extern float max_feedrate[7]; // set the max speeds
extern float max_feedrate[NUM_AXIS]; // set the max speeds
extern float max_retraction_feedrate[4]; // set the max speeds for retraction
extern float axis_steps_per_unit[7];
extern unsigned long max_acceleration_units_per_sq_second[4]; // Use M201 to override by software
extern float axis_steps_per_unit[NUM_AXIS];
extern unsigned long max_acceleration_units_per_sq_second[NUM_AXIS]; // Use M201 to override by software
extern float minimumfeedrate;
extern float acceleration; // Normal acceleration mm/s^2 THIS IS THE DEFAULT ACCELERATION for all moves. M204 SXXXX
extern float retract_acceleration; // mm/s^2 filament pull-pack and push-forward while standing still in the other axis M204 TXXXX
......@@ -157,14 +157,7 @@ FORCE_INLINE block_t *plan_get_current_block()
}
// Returns true if the buffer has a queued block, false otherwise
FORCE_INLINE bool blocks_queued()
{
if (block_buffer_head == block_buffer_tail) {
return false;
}
else
return true;
}
FORCE_INLINE bool blocks_queued() { return (block_buffer_head != block_buffer_tail); }
#ifdef PREVENT_DANGEROUS_EXTRUDE
void set_extrude_min_temp(float temp);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment