Skip to content

M
MarlinKimbra
Commit c4f77ca4 authored by MagoKimbra's avatar MagoKimbra
Browse files
Options

Update 4.2.3 

Fix problem redefination
parent 263d5a7c
Hide whitespace changes
Inline Side-by-side
Showing with 115 additions and 111 deletions
MarlinKimbra/Configuration_Basic.h
View file @ c4f77ca4
......@@ -195,16 +195,16 @@
//Preheat Constants
#define PLA_PREHEAT_HOTEND_TEMP 190
#define PLA_PREHEAT_HPB_TEMP 60
#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
#define PLA_PREHEAT_HPB_TEMP 60
#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
#define ABS_PREHEAT_HOTEND_TEMP 240
#define ABS_PREHEAT_HPB_TEMP 100
#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
#define ABS_PREHEAT_HPB_TEMP 100
#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
#define GUM_PREHEAT_HOTEND_TEMP 230
#define GUM_PREHEAT_HPB_TEMP 60
#define GUM_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
#define GUM_PREHEAT_HPB_TEMP 60
#define GUM_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
/*****************************************************************************************************/
......
MarlinKimbra/Configuration_Feature.h
View file @ c4f77ca4
#ifndef Configuration_Feature_H
#define Configuration_Feature_H
#ifndef CONFIGURATION_FEATURE_H
#define CONFIGURATION_FEATURE_H
/*
* This configuration file contains all features that can be enabled.
......@@ -220,15 +220,15 @@
#define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER // limit for the integral term
// 120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
// from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4
#define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4
// 120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
// from pidautotune
//#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16
//#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
......@@ -995,7 +995,7 @@
//#define SDEXTRASLOW // Use even slower SD transfer mode (not normally needed - uncomment if you're getting volume init error)
//#define SD_CHECK_AND_RETRY // Use CRC checks and retries on the SD communication
// Decomment thi if you are external SD without DETECT_PIN
// Decomment this if you are external SD without DETECT_PIN
//#define SD_DISABLED_DETECT
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
// around this by connecting a push button or single throw switch to the pin defined
......
MarlinKimbra/Configuration_Overall.h
View file @ c4f77ca4
/**
* Configuration_Overall.h
* Here you can define all your custom settings and they will overwrite configurations in the main configuration files.
* Decomment or comment CONFIGURATION OVERALL ON for active or deactive this file.
*/
//#define CONFIGURATION_OVERALL_ON
MarlinKimbra/Configuration_Version.h
View file @ c4f77ca4
#ifndef CONFIGURATION_VERSION_H
#define CONFIGURATION_VERSION_H
#define BUILD_VERSION "MarlinKimbra 4.2.2 dev"
#define SHORT_BUILD_VERSION "4.2.2 dev"
#define BUILD_VERSION "MarlinKimbra 4.2.3 dev"
#define SHORT_BUILD_VERSION "4.2.3 dev"
#define STRING_DISTRIBUTION_DATE __DATE__ " " __TIME__ // build date and time
// It might also be appropriate to define a location where additional information can be found
#define SOURCE_CODE_URL "https://github.com/MagoKimbra/MarlinKimbra"
......
MarlinKimbra/Marlin_main.cpp
View file @ c4f77ca4
......@@ -5916,7 +5916,7 @@ inline void gcode_M226() {
#endif
srv->write(servo_position);
#if HAS(SERVO_ENDSTOPS)
delay(PROBE_SERVO_DEACTIVATION_DELAY);
delay(SERVO_DEACTIVATION_DELAY);
srv->detach();
#endif
}
......
MarlinKimbra/base.h
View file @ c4f77ca4
......@@ -29,29 +29,30 @@
#include "mechanics.h"
#include "Configuration_Version.h"
#include "Configuration_Basic.h"
#include "Configuration_Overall.h"
#if MECH(CARTESIAN)
#include "Configuration_Cartesian.h"
#elif MECH(COREXY)
#include "Configuration_Core.h"
#elif MECH(COREXZ)
#include "Configuration_Core.h"
#elif MECH(DELTA)
#include "Configuration_Delta.h"
#elif MECH(SCARA)
#include "Configuration_Scara.h"
#ifndef CONFIGURATION_OVERALL_ON
#include "Configuration_Basic.h"
#if MECH(CARTESIAN)
#include "Configuration_Cartesian.h"
#elif MECH(COREXY)
#include "Configuration_Core.h"
#elif MECH(COREXZ)
#include "Configuration_Core.h"
#elif MECH(DELTA)
#include "Configuration_Delta.h"
#elif MECH(SCARA)
#include "Configuration_Scara.h"
#endif
#include "Configuration_Feature.h"
#endif
#include "Configuration_Feature.h"
#include "Configuration_Overall.h"
#include "language/language.h"
#include "conditionals.h"
#include "sanitycheck.h"
#include "thermistortables.h"
#include "comunication.h"
typedef unsigned long millis_t;
......
MarlinKimbra/conditionals.h
View file @ c4f77ca4
......@@ -222,13 +222,13 @@
#endif
#include "pins.h"
#include "Configuration_Overall.h"
/**
* DONDOLO
*/
#if ENABLED(DONDOLO)
#undef SINGLENOZZLE
#undef DRIVER_EXTRUDERS
#define DRIVER_EXTRUDERS 1
#endif
......@@ -236,9 +236,11 @@
* SINGLENOZZLE
*/
#if ENABLED(SINGLENOZZLE)
#undef HOTENDS
#define HOTENDS 1
#undef TEMP_SENSOR_1_AS_REDUNDANT
#else
#undef HOTENDS
#define HOTENDS EXTRUDERS
#endif
......@@ -246,6 +248,7 @@
* DRIVER_EXTRUDERS
*/
#if DISABLED(MKR4) && DISABLED(NPR2) && DISABLED(DONDOLO)
#undef DRIVER_EXTRUDERS
#define DRIVER_EXTRUDERS EXTRUDERS // This defines the number of Driver extruder
#endif
......
MarlinKimbra/language/language_ca.h
View file @ c4f77ca4
......@@ -34,19 +34,18 @@
#define MSG_ONFOR "On x:"
#define MSG_PWRCONSUMED "P.er:"
#define MSG_PREHEAT "Preesc."
#define MSG_CONFIG "Configuració
#define MSG_PREHEAT_PLA MSG_PREHEAT " PLA"
#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " All"
#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " llit"
#define MSG_PREHEAT_PLA_SETTINGS "PLA " MSG_CONFIG
#define MSG_PREHEAT_PLA_SETTINGS "PLA Configuracio"
#define MSG_PREHEAT_ABS MSG_PREHEAT " ABS"
#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " All"
#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " llit"
#define MSG_PREHEAT_ABS_SETTINGS "ABS " MSG_CONFIG
#define MSG_PREHEAT_ABS_SETTINGS "ABS Configuracio"
#define MSG_PREHEAT_GUM MSG_PREHEAT " GUM"
#define MSG_PREHEAT_GUM_ALL MSG_PREHEAT_GUM " All"
#define MSG_PREHEAT_GUM_BEDONLY MSG_PREHEAT_GUM " Bed"
#define MSG_PREHEAT_GUM_SETTINGS "GUM " MSG_CONFIG
#define MSG_PREHEAT_GUM_SETTINGS "GUM Configuracio"
#define MSG_TOO_COLD_FOR_FILAMENTCHANGE "Hotend too cold to change filament"
#define MSG_COOLDOWN "Refredar"
#define MSG_SWITCH_PS_ON "Switch power on"
......
MarlinKimbra/language/language_cn.h
View file @ c4f77ca4
......@@ -34,19 +34,18 @@
#define MSG_ONFOR "On x:"
#define MSG_PWRCONSUMED "P.er:"
#define MSG_PREHEAT "\xc3\xc4"
#define MSG_CONFIG "\xbe\xbf"
#define MSG_PREHEAT_PLA MSG_PREHEAT " PLA"
#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " \xc5\xc6"
#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " \xc4\xc7"
#define MSG_PREHEAT_PLA_SETTINGS "PLA " MSG_CONFIG
#define MSG_PREHEAT_PLA_SETTINGS "PLA \xbe\xbf"
#define MSG_PREHEAT_ABS MSG_PREHEAT " ABS"
#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " \xc5\xc6"
#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " \xbe\xc6"
#define MSG_PREHEAT_ABS_SETTINGS "ABS " MSG_CONFIG
#define MSG_PREHEAT_ABS_SETTINGS "ABS \xbe\xbf"
#define MSG_PREHEAT_GUM MSG_PREHEAT " GUM"
#define MSG_PREHEAT_GUM_ALL MSG_PREHEAT_GUM " \xc5\xc6"
#define MSG_PREHEAT_GUM_BEDONLY MSG_PREHEAT_GUM " \xc4\xc7"
#define MSG_PREHEAT_GUM_SETTINGS "GUM " MSG_CONFIG
#define MSG_PREHEAT_GUM_SETTINGS "GUM \xbe\xbf"
#define MSG_TOO_COLD_FOR_FILAMENTCHANGE "Hotend too cold to change filament"
#define MSG_COOLDOWN "\xc8\xc9"
#define MSG_SWITCH_PS_ON "\xb9\xcb\xca\xb3"
......
MarlinKimbra/language/language_da.h
View file @ c4f77ca4
......@@ -34,19 +34,18 @@
#define MSG_ONFOR "On x:"
#define MSG_PWRCONSUMED "P.er:"
#define MSG_PREHEAT "Forvarm"
#define MSG_CONFIG "conf."
#define MSG_PREHEAT_PLA MSG_PREHEAT " PLA"
#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " Alle"
#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " Bed"
#define MSG_PREHEAT_PLA_SETTINGS "PLA " MSG_CONFIG
#define MSG_PREHEAT_PLA_SETTINGS "PLA conf."
#define MSG_PREHEAT_ABS MSG_PREHEAT " ABS"
#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " Alle"
#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " Bed"
#define MSG_PREHEAT_ABS_SETTINGS "ABS " MSG_CONFIG
#define MSG_PREHEAT_ABS_SETTINGS "ABS conf."
#define MSG_PREHEAT_GUM MSG_PREHEAT " GUM"
#define MSG_PREHEAT_GUM_ALL MSG_PREHEAT_GUM " Alle"
#define MSG_PREHEAT_GUM_BEDONLY MSG_PREHEAT_GUM " Bed"
#define MSG_PREHEAT_GUM_SETTINGS "GUM " MSG_CONFIG
#define MSG_PREHEAT_GUM_SETTINGS "GUM conf."
#define MSG_TOO_COLD_FOR_FILAMENTCHANGE "Hotend too cold to change filament"
#define MSG_COOLDOWN "Afkøl"
#define MSG_SWITCH_PS_ON "Slå strøm til"
......
MarlinKimbra/language/language_de.h
View file @ c4f77ca4
......@@ -34,19 +34,18 @@
#define MSG_ONFOR "On x:"
#define MSG_PWRCONSUMED "P.er:"
#define MSG_PREHEAT "Vorwärmen"
#define MSG_CONFIG "conf."
#define MSG_PREHEAT_PLA MSG_PREHEAT " PLA"
#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " All"
#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " Bed"
#define MSG_PREHEAT_PLA_SETTINGS "PLA " MSG_CONFIG
#define MSG_PREHEAT_PLA_SETTINGS "PLA conf."
#define MSG_PREHEAT_ABS MSG_PREHEAT " ABS"
#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " All"
#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " Bed"
#define MSG_PREHEAT_ABS_SETTINGS "ABS " MSG_CONFIG
#define MSG_PREHEAT_ABS_SETTINGS "ABS conf."
#define MSG_PREHEAT_GUM MSG_PREHEAT " GUM"
#define MSG_PREHEAT_GUM_ALL MSG_PREHEAT_GUM " All"
#define MSG_PREHEAT_GUM_BEDONLY MSG_PREHEAT_GUM " Bed"
#define MSG_PREHEAT_GUM_SETTINGS "GUM " MSG_CONFIG
#define MSG_PREHEAT_GUM_SETTINGS "GUM conf."
#define MSG_TOO_COLD_FOR_FILAMENTCHANGE "Hotend too cold to change filament"
#define MSG_COOLDOWN "Abkühlen"
#define MSG_SWITCH_PS_ON "Netzteil Ein"
......
MarlinKimbra/language/language_en.h
View file @ c4f77ca4
......@@ -34,19 +34,18 @@
#define MSG_ONFOR "On x:"
#define MSG_PWRCONSUMED "P.er:"
#define MSG_PREHEAT "Preheat"
#define MSG_CONFIG "conf."
#define MSG_PREHEAT_PLA MSG_PREHEAT " PLA"
#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " All"
#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " Bed"
#define MSG_PREHEAT_PLA_SETTINGS "PLA " MSG_CONFIG
#define MSG_PREHEAT_PLA_SETTINGS "PLA conf."
#define MSG_PREHEAT_ABS MSG_PREHEAT " ABS"
#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " All"
#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " Bed"
#define MSG_PREHEAT_ABS_SETTINGS "ABS " MSG_CONFIG
#define MSG_PREHEAT_ABS_SETTINGS "ABS conf."
#define MSG_PREHEAT_GUM MSG_PREHEAT " GUM"
#define MSG_PREHEAT_GUM_ALL MSG_PREHEAT_GUM " All"
#define MSG_PREHEAT_GUM_BEDONLY MSG_PREHEAT_GUM " Bed"
#define MSG_PREHEAT_GUM_SETTINGS "GUM " MSG_CONFIG
#define MSG_PREHEAT_GUM_SETTINGS "GUM conf."
#define MSG_TOO_COLD_FOR_FILAMENTCHANGE "Hotend too cold to change filament"
#define MSG_COOLDOWN "Cooldown"
#define MSG_SWITCH_PS_ON "Switch power on"
......
MarlinKimbra/language/language_es.h
View file @ c4f77ca4
......@@ -34,19 +34,18 @@
#define MSG_ONFOR "On x:"
#define MSG_PWRCONSUMED "P.er:"
#define MSG_PREHEAT "Precalentar"
#define MSG_CONFIG "conf."
#define MSG_PREHEAT_PLA MSG_PREHEAT " PLA"
#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " All"
#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " Bed"
#define MSG_PREHEAT_PLA_SETTINGS "PLA " MSG_CONFIG
#define MSG_PREHEAT_PLA_SETTINGS "PLA conf."
#define MSG_PREHEAT_ABS MSG_PREHEAT " ABS"
#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " All"
#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " Bed"
#define MSG_PREHEAT_ABS_SETTINGS "ABS " MSG_CONFIG
#define MSG_PREHEAT_ABS_SETTINGS "ABS conf."
#define MSG_PREHEAT_GUM MSG_PREHEAT " GUM"
#define MSG_PREHEAT_GUM_ALL MSG_PREHEAT_GUM " All"
#define MSG_PREHEAT_GUM_BEDONLY MSG_PREHEAT_GUM " Bed"
#define MSG_PREHEAT_GUM_SETTINGS "GUM " MSG_CONFIG
#define MSG_PREHEAT_GUM_SETTINGS "GUM conf."
#define MSG_TOO_COLD_FOR_FILAMENTCHANGE "Hotend too cold to change filament"
#define MSG_COOLDOWN "Enfriar"
#define MSG_SWITCH_PS_ON "Encender"
......
MarlinKimbra/language/language_eu.h
View file @ c4f77ca4
......@@ -34,19 +34,18 @@
#define MSG_ONFOR "On x:"
#define MSG_PWRCONSUMED "P.er:"
#define MSG_PREHEAT "Berotu"
#define MSG_CONFIG "Konfig"
#define MSG_PREHEAT_PLA MSG_PREHEAT " PLA"
#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " Guztia"
#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " Ohea"
#define MSG_PREHEAT_PLA_SETTINGS "PLA " MSG_CONFIG
#define MSG_PREHEAT_PLA_SETTINGS "PLA Konfig"
#define MSG_PREHEAT_ABS MSG_PREHEAT " ABS"
#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " Guztia"
#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " Ohea"
#define MSG_PREHEAT_ABS_SETTINGS "ABS " MSG_CONFIG
#define MSG_PREHEAT_ABS_SETTINGS "ABS Konfig"
#define MSG_PREHEAT_GUM MSG_PREHEAT " GUM"
#define MSG_PREHEAT_GUM_ALL MSG_PREHEAT_GUM " Guztia"
#define MSG_PREHEAT_GUM_BEDONLY MSG_PREHEAT_GUM " Ohea"
#define MSG_PREHEAT_GUM_SETTINGS "GUM " MSG_CONFIG
#define MSG_PREHEAT_GUM_SETTINGS "GUM Konfig"
#define MSG_TOO_COLD_FOR_FILAMENTCHANGE "Hotend too cold to change filament"
#define MSG_COOLDOWN "Hoztu"
#define MSG_SWITCH_PS_ON "Energia piztu"
......
MarlinKimbra/language/language_fi.h
View file @ c4f77ca4
......@@ -34,19 +34,18 @@
#define MSG_ONFOR "On x:"
#define MSG_PWRCONSUMED "P.er:"
#define MSG_PREHEAT "Preheat"
#define MSG_CONFIG "conf."
#define MSG_PREHEAT_PLA MSG_PREHEAT " PLA"
#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " All"
#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " Bed"
#define MSG_PREHEAT_PLA_SETTINGS "PLA " MSG_CONFIG
#define MSG_PREHEAT_PLA_SETTINGS "PLA conf."
#define MSG_PREHEAT_ABS MSG_PREHEAT " ABS"
#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " All"
#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " Bed"
#define MSG_PREHEAT_ABS_SETTINGS "ABS " MSG_CONFIG
#define MSG_PREHEAT_ABS_SETTINGS "ABS conf."
#define MSG_PREHEAT_GUM MSG_PREHEAT " GUM"
#define MSG_PREHEAT_GUM_ALL MSG_PREHEAT_GUM " All"
#define MSG_PREHEAT_GUM_BEDONLY MSG_PREHEAT_GUM " Bed"
#define MSG_PREHEAT_GUM_SETTINGS "GUM " MSG_CONFIG
#define MSG_PREHEAT_GUM_SETTINGS "GUM conf."
#define MSG_TOO_COLD_FOR_FILAMENTCHANGE "Hotend too cold to change filament"
#define MSG_COOLDOWN "Jäähdytä"
#define MSG_SWITCH_PS_ON "Virta päälle"
......
MarlinKimbra/language/language_fr.h
View file @ c4f77ca4
......@@ -34,19 +34,18 @@
#define MSG_ONFOR "On x:"
#define MSG_PWRCONSUMED "P.er:"
#define MSG_PREHEAT "Prech."
#define MSG_CONFIG "conf."
#define MSG_PREHEAT_PLA MSG_PREHEAT " PLA"
#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " Tout"
#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " Plateau"
#define MSG_PREHEAT_PLA_SETTINGS "PLA " MSG_CONFIG
#define MSG_PREHEAT_PLA_SETTINGS "PLA conf."
#define MSG_PREHEAT_ABS MSG_PREHEAT " ABS"
#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " Tout"
#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " Plateau"
#define MSG_PREHEAT_ABS_SETTINGS "ABS " MSG_CONFIG
#define MSG_PREHEAT_ABS_SETTINGS "ABS conf."
#define MSG_PREHEAT_GUM MSG_PREHEAT " GUM"
#define MSG_PREHEAT_GUM_ALL MSG_PREHEAT_GUM " Tout"
#define MSG_PREHEAT_GUM_BEDONLY MSG_PREHEAT_GUM " Plateau"
#define MSG_PREHEAT_GUM_SETTINGS "GUM " MSG_CONFIG
#define MSG_PREHEAT_GUM_SETTINGS "GUM conf."
#define MSG_TOO_COLD_FOR_FILAMENTCHANGE "Hotend too cold to change filament"
#define MSG_COOLDOWN "Refroidir"
#define MSG_SWITCH_PS_ON "Allumer alim."
......
MarlinKimbra/language/language_it.h
View file @ c4f77ca4
......@@ -34,7 +34,6 @@
#define MSG_ONFOR "On x:"
#define MSG_PWRCONSUMED "P.za:"
#define MSG_PREHEAT "Preriscalda"
#define MSG_CONFIG "conf."
#define MSG_PREHEAT_PLA "Preriscalda PLA"
#define MSG_PREHEAT_PLA_ALL "Prer. PLA Tutto"
#define MSG_PREHEAT_PLA_BEDONLY "Prer. PLA Piatto"
......
MarlinKimbra/language/language_kana.h
View file @ c4f77ca4
......@@ -36,7 +36,6 @@
#define MSG_ONFOR "On x:"
#define MSG_PWRCONSUMED "P.er:"
#define MSG_PREHEAT "Preheat"
#define MSG_CONFIG "conf."
#define MSG_PREHEAT_PLA "PLA \xd6\xc8\xc2"
#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " \xbd\xcd\xde\xc3" // " All"
#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " \xcd\xde\xaf\xc4\xde" // "Bed"
......
MarlinKimbra/language/language_kana_utf8.h
View file @ c4f77ca4
......@@ -39,7 +39,6 @@
#define MSG_ONFOR "On x:"
#define MSG_PWRCONSUMED "P.er:"
#define MSG_PREHEAT "Preheat"
#define MSG_CONFIG "conf."
#define MSG_PREHEAT_PLA "PLA ヨネシ" // "Preheat PLA"
#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " スベテ" // " All"
#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " ベツド" // "Bed"
......@@ -51,7 +50,7 @@
#define MSG_PREHEAT_GUM MSG_PREHEAT " GUM"
#define MSG_PREHEAT_GUM_ALL MSG_PREHEAT_GUM " All"
#define MSG_PREHEAT_GUM_BEDONLY MSG_PREHEAT_GUM " Bed"
#define MSG_PREHEAT_GUM_SETTINGS "GUM " MSG_CONFIG
#define MSG_PREHEAT_GUM_SETTINGS "GUM conf."
#define MSG_TOO_COLD_FOR_FILAMENTCHANGE "Hotend too cold to change filament"
#define MSG_COOLDOWN "セネシテイシ" // "Cooldown"
#define MSG_SWITCH_PS_ON "デンケゾ オン" // "Switch power on"
......
MarlinKimbra/language/language_nl.h
View file @ c4f77ca4
......@@ -34,7 +34,6 @@
#define MSG_ONFOR "On x:"
#define MSG_PWRCONSUMED "P.er:"
#define MSG_PREHEAT "Preheat"
#define MSG_CONFIG "conf."
#define MSG_PREHEAT_PLA "PLA voorverwarmen"
#define MSG_PREHEAT_PLA_ALL "PLA voorverw. aan"
#define MSG_PREHEAT_PLA_BEDONLY "PLA voorverw. Bed"
......@@ -46,7 +45,7 @@
#define MSG_PREHEAT_GUM MSG_PREHEAT " GUM"
#define MSG_PREHEAT_GUM_ALL MSG_PREHEAT_GUM " All"
#define MSG_PREHEAT_GUM_BEDONLY MSG_PREHEAT_GUM " Bed"
#define MSG_PREHEAT_GUM_SETTINGS "GUM " MSG_CONFIG
#define MSG_PREHEAT_GUM_SETTINGS "GUM conf."
#define MSG_TOO_COLD_FOR_FILAMENTCHANGE "Hotend too cold to change filament"
#define MSG_COOLDOWN "Afkoelen"
#define MSG_SWITCH_PS_ON "Stroom aan"
......
MarlinKimbra/language/language_pl.h
View file @ c4f77ca4
......@@ -34,7 +34,6 @@
#define MSG_ONFOR "On x:"
#define MSG_PWRCONSUMED "P.er:"
#define MSG_PREHEAT "Preheat"
#define MSG_CONFIG "conf."
#define MSG_PREHEAT_PLA "Rozgrzej PLA"
#define MSG_PREHEAT_PLA_ALL "Roz. PLA Wszystko"
#define MSG_PREHEAT_PLA_BEDONLY "Rozgrzej PLA Loze"
......
MarlinKimbra/language/language_pt-br.h
View file @ c4f77ca4
......@@ -34,19 +34,18 @@
#define MSG_ONFOR "On x:"
#define MSG_PWRCONSUMED "P.er:"
#define MSG_PREHEAT "Pre-aq."
#define MSG_CONFIG "setting"
#define MSG_PREHEAT_PLA MSG_PREHEAT " PLA"
#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " Tudo"
#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " Base"
#define MSG_PREHEAT_PLA_SETTINGS "PLA " MSG_CONFIG
#define MSG_PREHEAT_PLA_SETTINGS "PLA setting"
#define MSG_PREHEAT_ABS MSG_PREHEAT " ABS"
#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " Tudo"
#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " Base"
#define MSG_PREHEAT_ABS_SETTINGS "ABS " MSG_CONFIG
#define MSG_PREHEAT_ABS_SETTINGS "ABS setting"
#define MSG_PREHEAT_GUM MSG_PREHEAT " GUM"
#define MSG_PREHEAT_GUM_ALL MSG_PREHEAT_GUM " Tudo"
#define MSG_PREHEAT_GUM_BEDONLY MSG_PREHEAT_GUM " Base"
#define MSG_PREHEAT_GUM_SETTINGS "GUM " MSG_CONFIG
#define MSG_PREHEAT_GUM_SETTINGS "GUM setting"
#define MSG_TOO_COLD_FOR_FILAMENTCHANGE "Hotend too cold to change filament"
#define MSG_COOLDOWN "Esfriar"
#define MSG_SWITCH_PS_ON "Switch Power On"
......
MarlinKimbra/language/language_pt.h
View file @ c4f77ca4
......@@ -34,19 +34,18 @@
#define MSG_ONFOR "On x:"
#define MSG_PWRCONSUMED "P.er:"
#define MSG_PREHEAT "Pre-aq."
#define MSG_CONFIG "definicoes"
#define MSG_PREHEAT_PLA MSG_PREHEAT " PLA"
#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " Tudo"
#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " Base"
#define MSG_PREHEAT_PLA_SETTINGS "PLA " MSG_CONFIG
#define MSG_PREHEAT_PLA_SETTINGS "PLA definicoes"
#define MSG_PREHEAT_ABS MSG_PREHEAT " ABS"
#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " Tudo"
#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " Base"
#define MSG_PREHEAT_ABS_SETTINGS "ABS " MSG_CONFIG
#define MSG_PREHEAT_ABS_SETTINGS "ABS definicoes"
#define MSG_PREHEAT_GUM MSG_PREHEAT " GUM"
#define MSG_PREHEAT_GUM_ALL MSG_PREHEAT_GUM " Tudo"
#define MSG_PREHEAT_GUM_BEDONLY MSG_PREHEAT_GUM " Base"
#define MSG_PREHEAT_GUM_SETTINGS "GUM " MSG_CONFIG
#define MSG_PREHEAT_GUM_SETTINGS "GUM definicoes"
#define MSG_TOO_COLD_FOR_FILAMENTCHANGE "Hotend too cold to change filament"
#define MSG_COOLDOWN "Arrefecer"
#define MSG_SWITCH_PS_ON "Ligar"
......
MarlinKimbra/language/language_ru.h
View file @ c4f77ca4
......@@ -34,19 +34,18 @@
#define MSG_ONFOR "On x:"
#define MSG_PWRCONSUMED "P.er:"
#define MSG_PREHEAT "Преднаг"
#define MSG_CONFIG "Настрой."
#define MSG_PREHEAT_PLA MSG_PREHEAT " PLA"
#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " все"
#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " Кровать"
#define MSG_PREHEAT_PLA_SETTINGS MSG_CONFIG " PLA"
#define MSG_PREHEAT_PLA_SETTINGS "Настрой. PLA"
#define MSG_PREHEAT_ABS MSG_PREHEAT " ABS"
#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " все "
#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " Кровать"
#define MSG_PREHEAT_ABS_SETTINGS MSG_CONFIG " ABS"
#define MSG_PREHEAT_ABS_SETTINGS "Настрой. ABS"
#define MSG_PREHEAT_GUM MSG_PREHEAT " GUM"
#define MSG_PREHEAT_GUM_ALL MSG_PREHEAT_GUM " All"
#define MSG_PREHEAT_GUM_BEDONLY MSG_PREHEAT_GUM " Bed"
#define MSG_PREHEAT_GUM_SETTINGS MSG_CONFIG " GUM"
#define MSG_PREHEAT_GUM_SETTINGS "Настрой. GUM"
#define MSG_TOO_COLD_FOR_FILAMENTCHANGE "Hotend too cold to change filament"
#define MSG_COOLDOWN "Охлаждение"
#define MSG_SWITCH_PS_ON "Switch Power On"
......
MarlinKimbra/pins.h
View file @ c4f77ca4
......@@ -5440,20 +5440,26 @@ DaveX plan for Teensylu/printrboard-type pinouts (ref teensylu & sprinter) for a
#if X_HOME_DIR > 0 // Home X to MAX
#undef X_MIN_PIN
#define X_MIN_PIN -1
#elif X_HOME_DIR < 0 // Home X to MIN
#undef X_MAX_PIN
#define X_MAX_PIN -1
#endif //X_HOME_DIR > 0
#if Y_HOME_DIR > 0 // Home Y to MAX
#undef Y_MIN_PIN
#define Y_MIN_PIN -1
#elif Y_HOME_DIR < 0 // Home Y to MIN
#undef Y_MAX_PIN
#define Y_MAX_PIN -1
#endif //Y_HOME_DIR > 0
#if Z_HOME_DIR > 0 // Home Z to MAX
#undef Z_MIN_PIN
#define Z_MIN_PIN -1
#elif Z_HOME_DIR < 0 // Home Z to MIN
#undef Z_MAX_PIN
#define Z_MAX_PIN -1
#endif //Z_HOME_DIR > 0
......
MarlinKimbra/sanitycheck.h
View file @ c4f77ca4
......@@ -13,26 +13,37 @@
#if DISABLED(BAUDRATE)
#error DEPENDENCY ERROR: Missing setting BAUDRATE
#endif
#if DISABLED(STRING_CONFIG_H_AUTHOR)
#define STRING_CONFIG_H_AUTHOR "(none, default config)"
#endif
#if DISABLED(MACHINE_UUID)
#error DEPENDENCY ERROR: Missing setting MACHINE_UUID
#endif
//board
// Board
#if DISABLED(MOTHERBOARD)
#error DEPENDENCY ERROR: Missing setting MOTHERBOARD
#endif
//Mechanism
// Mechanism
#if DISABLED(MECHANISM)
#error DEPENDENCY ERROR: Missing setting MECHANISM
#endif
//Power supply
// Power supply
#if DISABLED(POWER_SUPPLY)
#error DEPENDENCY ERROR: Missing setting POWER_SUPPLY
#define POWER_SUPPLY 0
#endif
//Thermistor
// Extruders
#if DISABLED(EXTRUDERS)
#error DEPENDENCY ERROR: Missing setting EXTRUDERS
#endif
#if DISABLED(DRIVER_EXTRUDERS)
#error DEPENDENCY ERROR: Missing setting DRIVER_EXTRUDERS
#endif
// Thermistor
#if DISABLED(TEMP_SENSOR_0)
#error DEPENDENCY ERROR: Missing setting TEMP_SENSOR_0
#endif
......@@ -50,11 +61,16 @@
#endif
#if (THERMISTORHEATER_0 == 998) || (THERMISTORHEATER_1 == 998) || (THERMISTORHEATER_2 == 998) || (THERMISTORHEATER_3 == 998) || (THERMISTORBED == 998) //User EXIST table
#if DISABLED(DUMMY_THERMISTOR_998_VALUE)
#error DEPENDENCY ERROR: Missing setting DUMMY_THERMISTOR_998_VALUE
#define DUMMY_THERMISTOR_998_VALUE 25
#endif
#endif
#if (THERMISTORHEATER_0 == 999) || (THERMISTORHEATER_1 == 999) || (THERMISTORHEATER_2 == 999) || (THERMISTORHEATER_3 == 999) || (THERMISTORBED == 999) //User EXIST table
#if DISABLED(DUMMY_THERMISTOR_999_VALUE)
#define DUMMY_THERMISTOR_999_VALUE 25
#endif
#endif
//Temperature
// Temperature
/**
* Temperature defines
*/
......@@ -78,7 +94,7 @@
#if DISABLED(HEATER_1_MAXTEMP)
#error DEPENDENCY ERROR: Missing setting HEATER_1_MAXTEMP
#endif
#if DISABLED(HEATER_0_MINTEMP)
#if DISABLED(HEATER_1_MINTEMP)
#error DEPENDENCY ERROR: Missing setting HEATER_1_MINTEMP
#endif
#endif
......@@ -86,7 +102,7 @@
#if DISABLED(HEATER_2_MAXTEMP)
#error DEPENDENCY ERROR: Missing setting HEATER_2_MAXTEMP
#endif
#if DISABLED(HEATER_0_MINTEMP)
#if DISABLED(HEATER_2_MINTEMP)
#error DEPENDENCY ERROR: Missing setting HEATER_2_MINTEMP
#endif
#endif
......@@ -94,7 +110,7 @@
#if DISABLED(HEATER_3_MAXTEMP)
#error DEPENDENCY ERROR: Missing setting HEATER_3_MAXTEMP
#endif
#if DISABLED(HEATER_0_MINTEMP)
#if DISABLED(HEATER_3_MINTEMP)
#error DEPENDENCY ERROR: Missing setting HEATER_3_MINTEMP
#endif
#endif
......@@ -102,7 +118,7 @@
#if DISABLED(BED_MAXTEMP)
#error DEPENDENCY ERROR: Missing setting BED_MAXTEMP
#endif
#if DISABLED(HEATER_0_MINTEMP)
#if DISABLED(BED_MINTEMP)
#error DEPENDENCY ERROR: Missing setting BED_MINTEMP
#endif
#endif
......@@ -134,22 +150,14 @@
#error DEPENDENCY ERROR: Missing setting GUM_PREHEAT_FAN_SPEED
#endif
//extruders
#if DISABLED(EXTRUDERS)
#error DEPENDENCY ERROR: Missing setting EXTRUDERS
#endif
#if DISABLED(DRIVER_EXTRUDERS)
#error DEPENDENCY ERROR: Missing setting DRIVER_EXTRUDERS
#endif
//Language
// Language
#if DISABLED(LANGUAGE_CHOICE)
#error DEPENDENCY ERROR: Missing setting LANGUAGE_CHOICE
#endif
///FEATURE
/// FEATURE
//Temperature
// Temperature
#if DISABLED(PID_MAX)
#error DEPENDENCY ERROR: Missing setting PID_MAX
#endif
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment