Update firmware test

MarlinKimbra/language_ca.h

@@ -168,6 +168,7 @@
   #define MSG_FWTEST_03                     "Start check ENDSTOP"
   #define MSG_FWTEST_04                     "Start check MOTOR"
   #define MSG_FWTEST_ATTENTION              "ATTENTION! Check that the three axes are more than 5 mm from the endstop!"
+  #define MSG_FWTEST_END                    "Finish Test. Disable FIRMWARE_TEST and recompile."
 #endif // FIRMWARE_TEST
 
 #endif // LANGUAGE_EN_H

MarlinKimbra/language_de.h

@@ -168,6 +168,7 @@
   #define MSG_FWTEST_03                     "Start check ENDSTOP"
   #define MSG_FWTEST_04                     "Start check MOTOR"
   #define MSG_FWTEST_ATTENTION              "ATTENTION! Check that the three axes are more than 5 mm from the endstop!"
+  #define MSG_FWTEST_END                    "Finish Test. Disable FIRMWARE_TEST and recompile."
 #endif // FIRMWARE_TEST
 
 #endif // LANGUAGE_DE_H

MarlinKimbra/language_en.h

@@ -169,6 +169,7 @@
   #define MSG_FWTEST_04                     "Start check MOTOR"
   #define MSG_FWTEST_ATTENTION              "ATTENTION! Check that the three axes are more than 5 mm from the endstop!"
   #define MSG_FWTEST_END                    "Finish Test. Disable FIRMWARE_TEST and recompile."
+  #define MSG_FWTEST_END                    "Finish Test. Disable FIRMWARE_TEST and recompile."
 #endif // FIRMWARE_TEST
 
 #endif // LANGUAGE_EN_H

MarlinKimbra/language_eu.h

@@ -168,6 +168,7 @@
   #define MSG_FWTEST_03                     "Start check ENDSTOP"
   #define MSG_FWTEST_04                     "Start check MOTOR"
   #define MSG_FWTEST_ATTENTION              "ATTENTION! Check that the three axes are more than 5 mm from the endstop!"
+  #define MSG_FWTEST_END                    "Finish Test. Disable FIRMWARE_TEST and recompile."
 #endif // FIRMWARE_TEST
 
 #endif // LANGUAGE_EU_H

MarlinKimbra/language_fi.h

@@ -168,6 +168,7 @@
   #define MSG_FWTEST_03                     "Start check ENDSTOP"
   #define MSG_FWTEST_04                     "Start check MOTOR"
   #define MSG_FWTEST_ATTENTION              "ATTENTION! Check that the three axes are more than 5 mm from the endstop!"
+  #define MSG_FWTEST_END                    "Finish Test. Disable FIRMWARE_TEST and recompile."
 #endif // FIRMWARE_TEST
 
 #endif // LANGUAGE_FI_H

MarlinKimbra/language_fr.h

@@ -168,6 +168,7 @@
   #define MSG_FWTEST_03                     "Start check ENDSTOP"
   #define MSG_FWTEST_04                     "Start check MOTOR"
   #define MSG_FWTEST_ATTENTION              "ATTENTION! Check that the three axes are more than 5 mm from the endstop!"
+  #define MSG_FWTEST_END                    "Finish Test. Disable FIRMWARE_TEST and recompile."
 #endif // FIRMWARE_TEST
 
 #endif // LANGUAGE_FR_H

MarlinKimbra/language_nl.h

@@ -168,6 +168,7 @@
   #define MSG_FWTEST_03                     "Start check ENDSTOP"
   #define MSG_FWTEST_04                     "Start check MOTOR"
   #define MSG_FWTEST_ATTENTION              "ATTENTION! Check that the three axes are more than 5 mm from the endstop!"
+  #define MSG_FWTEST_END                    "Finish Test. Disable FIRMWARE_TEST and recompile."
 #endif // FIRMWARE_TEST
 
 #endif // LANGUAGE_NL_H

MarlinKimbra/language_pl.h

@@ -168,6 +168,7 @@
   #define MSG_FWTEST_03                     "Start check ENDSTOP"
   #define MSG_FWTEST_04                     "Start check MOTOR"
   #define MSG_FWTEST_ATTENTION              "ATTENTION! Check that the three axes are more than 5 mm from the endstop!"
+  #define MSG_FWTEST_END                    "Finish Test. Disable FIRMWARE_TEST and recompile."
 #endif // FIRMWARE_TEST
 
 #endif // LANGUAGE_PL_H

MarlinKimbra/language_pt-br.h

@@ -168,6 +168,7 @@
   #define MSG_FWTEST_03                     "Start check ENDSTOP"
   #define MSG_FWTEST_04                     "Start check MOTOR"
   #define MSG_FWTEST_ATTENTION              "ATTENTION! Check that the three axes are more than 5 mm from the endstop!"
+  #define MSG_FWTEST_END                    "Finish Test. Disable FIRMWARE_TEST and recompile."
 #endif // FIRMWARE_TEST
 
 #endif // LANGUAGE_PT_BR_H

MarlinKimbra/language_pt.h

@@ -168,6 +168,7 @@
   #define MSG_FWTEST_03                     "Start check ENDSTOP"
   #define MSG_FWTEST_04                     "Start check MOTOR"
   #define MSG_FWTEST_ATTENTION              "ATTENTION! Check that the three axes are more than 5 mm from the endstop!"
+  #define MSG_FWTEST_END                    "Finish Test. Disable FIRMWARE_TEST and recompile."
 #endif // FIRMWARE_TEST
 
 #endif // LANGUAGE_PT_H

MarlinKimbra/language_ru.h

@@ -168,6 +168,7 @@
   #define MSG_FWTEST_03                     "Start check ENDSTOP"
   #define MSG_FWTEST_04                     "Start check MOTOR"
   #define MSG_FWTEST_ATTENTION              "ATTENTION! Check that the three axes are more than 5 mm from the endstop!"
+  #define MSG_FWTEST_END                    "Finish Test. Disable FIRMWARE_TEST and recompile."
 #endif // FIRMWARE_TEST
 
 #endif // LANGUAGE_RU_H