Skip to content

M
MarlinKimbra
Commit b1fb1c6a authored by Franco (nextime) Lanza's avatar Franco (nextime) Lanza
Browse files
Options

Update laser patches for marlinkimbra changes

parent 9348f6ec
Show whitespace changes
Inline Side-by-side
Showing with 25 additions and 35 deletions
MK/module/MK_Main.cpp
View file @ b1fb1c6a
......@@ -2940,7 +2940,6 @@ inline void gcode_G2_G3(bool clockwise) {
gcode_get_destination();
#if ENABLED(LASER) && ENABLED(LASER_FIRE_G1)
if(lfire) {
if (code_seen('S') && IsRunning()) laser.intensity = (float) code_value();
if (code_seen('L') && IsRunning()) laser.duration = (unsigned long) labs(code_value());
if (code_seen('P') && IsRunning()) laser.ppm = (float) code_value();
......@@ -2949,7 +2948,6 @@ inline void gcode_G2_G3(bool clockwise) {
laser.status = LASER_ON;
laser.fired = LASER_FIRE_G1;
}
#endif
......@@ -2968,9 +2966,7 @@ inline void gcode_G2_G3(bool clockwise) {
refresh_cmd_timeout();
#if ENABLED(LASER) && ENABLED(LASER_FIRE_G1)
if(lfire) {
laser.status = LASER_OFF;
}
#endif
}
......@@ -3125,18 +3121,16 @@ inline void gcode_G7() {
laser.raster_direction = (bool)code_value();
destination[Y_AXIS] = current_position[Y_AXIS] + (laser.raster_mm_per_pulse * laser.raster_aspect_ratio); // increment Y axis
}
if (code_seen('D')) laser.raster_num_pixels = base64_decode(laser.raster_data, &cmdbuffer[bufindr][strchr_pointer - cmdbuffer[bufindr] + 1], laser.raster_raw_length);
if (code_seen('D')) laser.raster_num_pixels = base64_decode(laser.raster_data, seen_pointer+1, laser.raster_raw_length);
if (!laser.raster_direction) {
destination[X_AXIS] = current_position[X_AXIS] - (laser.raster_mm_per_pulse * laser.raster_num_pixels);
if (laser.diagnostics) {
SERIAL_ECHO_START;
SERIAL_ECHOLN("Negative Raster Line");
ECHO_LM(INFO, "Negative Raster Line");
}
} else {
destination[X_AXIS] = current_position[X_AXIS] + (laser.raster_mm_per_pulse * laser.raster_num_pixels);
if (laser.diagnostics) {
SERIAL_ECHO_START;
SERIAL_ECHOLN("Positive Raster Line");
ECHO_LM(INFO, "Positive Raster Line");
}
}
......@@ -4435,7 +4429,7 @@ inline void gcode_G92() {
}
#endif //ULTIPANEL
#if ENABLED(LASERBEAM) || (ENABLED(LASER) && ENABLED(LASER_SPINDLE))
#if (ENABLED(LASERBEAM) || ENABLED(LASER) && ENABLED(LASER_FIRE_SPINDLE))
/**
* M3: S - Setting laser beam or fire laser
*/
......@@ -4448,7 +4442,7 @@ inline void gcode_G92() {
laser_ttl_modulation = 0;
}
#endif
#if ENABLED(LASER) && ENABLED(LASER_SPINDLE)
#if ENABLED(LASER) && ENABLED(LASER_FIRE_SPINDLE)
if (code_seen('S') && IsRunning()) laser.intensity = (float) code_value();
if (code_seen('L') && IsRunning()) laser.duration = (unsigned long) labs(code_value());
if (code_seen('P') && IsRunning()) laser.ppm = (float) code_value();
......@@ -4473,7 +4467,7 @@ inline void gcode_G92() {
WRITE(LASER_PWR_PIN, HIGH);
laser_ttl_modulation = 0;
#endif
#if ENABLED(LASER) && ENABLED(LASER_SPINDLE)
#if ENABLED(LASER) && ENABLED(LASER_FIRE_SPINDLE)
gcode_M3();
#endif
......@@ -4487,7 +4481,7 @@ inline void gcode_G92() {
WRITE(LASER_PWR_PIN, LOW);
laser_ttl_modulation = 0;
#endif
#if ENABLED(LASER) && ENABLED(LASER_SPINDLE)
#if ENABLED(LASER) && ENABLED(LASER_FIRE_SPINDLE)
laser.status = LASER_OFF;
lcd_update();
prepare_move();
......@@ -7038,7 +7032,7 @@ inline void gcode_M503() {
if (code_seen('B') && IsRunning()) laser_set_mode((int) code_value());
if (code_seen('R') && IsRunning()) laser.raster_mm_per_pulse = ((float) code_value());
if (code_seen('F')) {
next_feedrate = code_value();
float next_feedrate = code_value();
if(next_feedrate > 0.0) feedrate = next_feedrate;
}
}
......@@ -7632,7 +7626,7 @@ void process_next_command() {
// G0 -> G1
case 0:
case 1:
gcode_G0_G1(codenum==1); break;
gcode_G0_G1(codenum == 1); break;
// G2, G3
#if !MECH(SCARA)
......@@ -8997,7 +8991,7 @@ void kill(const char* lcd_msg) {
void Stop() {
disable_all_heaters();
#ifdef LASER
if (laser.diagnostics) SERIAL_ECHOLN("Laser set to off, stop() called");
if (laser.diagnostics) ECHO_LM(INFO, "Laser set to off, stop() called");
laser_extinguish();
#endif
#ifdef LASER_PERIPHERALS
......
MK/module/laser/laser.cpp
View file @ b1fb1c6a
......@@ -123,7 +123,7 @@ void laser_fire(int intensity = 100.0){
#endif
if (laser.diagnostics) {
SERIAL_ECHOLN("Laser fired");
ECHO_LM(INFO, "Laser fired");
}
}
void laser_extinguish(){
......@@ -135,7 +135,7 @@ void laser_extinguish(){
laser.time += millis() - (laser.last_firing / 1000);
if (laser.diagnostics) {
SERIAL_ECHOLN("Laser extinguished");
ECHO_LM(INFO, "Laser extinguished");
}
}
}
......@@ -159,30 +159,26 @@ bool laser_peripherals_ok(){
void laser_peripherals_on(){
digitalWrite(LASER_PERIPHERALS_PIN, LOW);
if (laser.diagnostics) {
SERIAL_ECHO_START;
SERIAL_ECHOLNPGM("Laser Peripherals Enabled");
ECHO_LM(INFO, "Laser Peripherals Enabled");
}
}
void laser_peripherals_off(){
if (!digitalRead(LASER_PERIPHERALS_STATUS_PIN)) {
digitalWrite(LASER_PERIPHERALS_PIN, HIGH);
if (laser.diagnostics) {
SERIAL_ECHO_START;
SERIAL_ECHOLNPGM("Laser Peripherals Disabled");
ECHO_LM(INFO, "Laser Peripherals Disabled");
}
}
}
void laser_wait_for_peripherals() {
unsigned long timeout = millis() + LASER_PERIPHERALS_TIMEOUT;
if (laser.diagnostics) {
SERIAL_ECHO_START;
SERIAL_ECHOLNPGM("Waiting for peripheral control board signal...");
ECHO_LM(INFO, "Waiting for peripheral control board signal...");
}
while(!laser_peripherals_ok()) {
if (millis() > timeout) {
if (laser.diagnostics) {
SERIAL_ERROR_START;
SERIAL_ERRORLNPGM("Peripheral control board failed to respond");
ECHO_LM(ERR, "Peripheral control board failed to respond");
}
Stop();
break;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment