Skip to content

M
MarlinKimbra
Commit aa1b69a7 authored by Franco (nextime) Lanza's avatar Franco (nextime) Lanza
Browse files
Options

Merge remote-tracking branch 'upstream/dev' into dev

parents 2f99cb36 46ac851b
Pipeline #50 skipped
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 768 additions and 475 deletions
Documentation/GCodes.md
View file @ aa1b69a7
...@@ -8,10 +8,10 @@ ...@@ -8,10 +8,10 @@
* G3 - CCW ARC * G3 - CCW ARC
* G4 - Dwell S[seconds] or P[milliseconds], delay in Second or Millisecond * G4 - Dwell S[seconds] or P[milliseconds], delay in Second or Millisecond
* G5 - Bezier curve - from http://forums.reprap.org/read.php?147,93577 * G5 - Bezier curve - from http://forums.reprap.org/read.php?147,93577
* G7 - execute raster (base64) line (LASER) * G7 - Laser raster base64
* G10 - retract filament according to settings of M207 * G10 - retract filament according to settings of M207
* G11 - retract recover filament according to settings of M208 * G11 - retract recover filament according to settings of M208
* G28 - X0 Y0 Z0 Home all Axis. G28 M for bed manual setting with LCD. * G28 - X Y Z Home all Axis. M for bed manual setting with LCD. B return to back point
* G29 - Detailed Z-Probe, probes the bed at 3 points or grid. You must be at the home position for this to work correctly. * G29 - Detailed Z-Probe, probes the bed at 3 points or grid. You must be at the home position for this to work correctly.
G29 Fyyy Lxxx Rxxx Byyy for customer grid. G29 Fyyy Lxxx Rxxx Byyy for customer grid.
* G30 - Single Z Probe, probes bed at current XY location. Bed Probe and Delta geometry Autocalibration G30 A * G30 - Single Z Probe, probes bed at current XY location. Bed Probe and Delta geometry Autocalibration G30 A
...@@ -47,7 +47,8 @@ ...@@ -47,7 +47,8 @@
* M32 - Make directory * M32 - Make directory
* M35 - Upload Firmware to Nextion from SD * M35 - Upload Firmware to Nextion from SD
* M42 - Change pin status via gcode Use M42 Px Sy to set pin x to value y, when omitting Px the onboard led will be used. * M42 - Change pin status via gcode Use M42 Px Sy to set pin x to value y, when omitting Px the onboard led will be used.
* M49 - Z probe repetability test * M48 - Measure Z_Probe repeatability. M48 [P # of points] [X position] [Y position] [V_erboseness #] [E_ngage Probe] [L # of legs of travel]
* M70 - Power consumption sensor calibration
* M80 - Turn on Power Supply * M80 - Turn on Power Supply
* M81 - Turn off Power, including Power Supply, if possible * M81 - Turn off Power, including Power Supply, if possible
* M82 - Set E codes absolute (default) * M82 - Set E codes absolute (default)
...@@ -60,34 +61,40 @@ ...@@ -60,34 +61,40 @@
* M98 - Print Hysteresis value * M98 - Print Hysteresis value
* M99 - Set Hysteresis parameter M99 X<in mm> Y<in mm> Z<in mm> E<in mm> * M99 - Set Hysteresis parameter M99 X<in mm> Y<in mm> Z<in mm> E<in mm>
* M100 - Watch Free Memory (For Debugging Only) * M100 - Watch Free Memory (For Debugging Only)
* M104 - Set extruder target temp * M104 - Set hotend target temp
* M105 - Read current temp * M105 - Read current temp
* M106 - Fan on * M106 - Fan on
* M107 - Fan off * M107 - Fan off
* M109 - S[xxx] Wait for extruder current temp to reach target temp. Waits only when heating * M109 - S[xxx] Wait for hotend current temp to reach target temp. Waits only when heating
- R[xxx] Wait for extruder current temp to reach target temp. Waits when heating and cooling - R[xxx] Wait for hotend current temp to reach target temp. Waits when heating and cooling
* M111 - Debug Dryrun Repetier * M110 - Set the current line number
* M111 - Set debug flags with S<mask>.
* M112 - Emergency stop * M112 - Emergency stop
* M114 - Output current position to serial port, (V)erbose for user * M114 - Output current position to serial port
* M115 - Capabilities string * M115 - Capabilities string
* M117 - display message * M117 - Display a message on the controller screen
* M119 - Output Endstop status to serial port * M119 - Output Endstop status to serial port
* M120 - Disable Endstop * M120 - Enable endstop detection
* M121 - Enable Endstop * M121 - Disable endstop detection
* M122 - S<1=true/0=false> Enable or disable check software endstop * M122 - S<1=true/0=false> Enable or disable check software endstop
* M126 - Solenoid Air Valve Open (BariCUDA support by jmil) * M126 - Solenoid Air Valve Open (BariCUDA support by jmil)
* M127 - Solenoid Air Valve Closed (BariCUDA vent to atmospheric pressure by jmil) * M127 - Solenoid Air Valve Closed (BariCUDA vent to atmospheric pressure by jmil)
* M128 - EtoP Open (BariCUDA EtoP = electricity to air pressure transducer by jmil) * M128 - EtoP Open (BariCUDA EtoP = electricity to air pressure transducer by jmil)
* M129 - EtoP Closed (BariCUDA EtoP = electricity to air pressure transducer by jmil) * M129 - EtoP Closed (BariCUDA EtoP = electricity to air pressure transducer by jmil)
* M140 - Set bed or cooler target temp * M140 - Set hot bed target temp
* M141 - Set hot chamber target temp
* M142 - Set cooler target temp
* M145 - Set the heatup state H<hotend> B<bed> F<fan speed> for S<material> (0=PLA, 1=ABS) * M145 - Set the heatup state H<hotend> B<bed> F<fan speed> for S<material> (0=PLA, 1=ABS)
* M150 - Set BlinkM Color Output R: Red<0-255> U(!): Green<0-255> B: Blue<0-255> over i2c, G for green does not work. * M150 - Set BlinkM Color Output R: Red<0-255> U(!): Green<0-255> B: Blue<0-255> over i2c, G for green does not work.
* M163 - Set a single proportion for a mixing extruder. Requires COLOR_MIXING_EXTRUDER. * M163 - Set a single proportion for a mixing extruder. Requires COLOR_MIXING_EXTRUDER.
* M164 - Save the mix as a virtual extruder. Requires COLOR_MIXING_EXTRUDER and MIXING_VIRTUAL_TOOLS. * M164 - Save the mix as a virtual extruder. Requires COLOR_MIXING_EXTRUDER and MIXING_VIRTUAL_TOOLS.
* M165 - Set the proportions for a mixing extruder. Use parameters ABCDHI to set the mixing factors. Requires COLOR_MIXING_EXTRUDER. * M165 - Set the proportions for a mixing extruder. Use parameters ABCDHI to set the mixing factors. Requires COLOR_MIXING_EXTRUDER.
* M190 - S[xxx] Wait for bed or cooler current temp to reach target temp. Waits only when heating bed or cooling cooler * M190 - S[xxx] Wait for bed current temp to reach target temp. Waits only when heating
- R[xxx] Wait for bed or cooler current temp to reach target temp. Waits when heating and cooling - R[xxx] Wait for bed current temp to reach target temp. Waits when heating and cooling
- C parameter select Cooler, omitting it selec bed. * M191 - Sxxx Wait for chamber current temp to reach target temp. Waits only when heating
* Rxxx Wait for chamber current temp to reach target temp. Waits when heating and cooling
* M192 - Sxxx Wait for cooler current temp to reach target temp. Waits only when heating
* Rxxx Wait for cooler current temp to reach target temp. Waits when heating and cooling
* M200 - D[millimeters]- set filament diameter and set E axis units to cubic millimeters (use S0 to set back to millimeters). * M200 - D[millimeters]- set filament diameter and set E axis units to cubic millimeters (use S0 to set back to millimeters).
* M201 - Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000 Z1000 E0 S1000 E1 S1000 E2 S1000 E3 S1000) in mm/sec^2 * M201 - Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000 Z1000 E0 S1000 E1 S1000 E2 S1000 E3 S1000) in mm/sec^2
* M203 - Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E0 S1000 E1 S1000 E2 S1000 E3 S1000) in mm/sec * M203 - Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E0 S1000 E1 S1000 E2 S1000 E3 S1000) in mm/sec
...@@ -107,7 +114,9 @@ ...@@ -107,7 +114,9 @@
* M301 - Set PID parameters P I and D * M301 - Set PID parameters P I and D
* M302 - Allow cold extrudes * M302 - Allow cold extrudes
* M303 - PID relay autotune S<temperature> sets the target temperature (default target temperature = 150C). H<hotend> C<cycles> U<Apply result> * M303 - PID relay autotune S<temperature> sets the target temperature (default target temperature = 150C). H<hotend> C<cycles> U<Apply result>
* M304 - Set bed PID parameters P I and D or Water Cooling if C parameter * M304 - Set hot bed PID parameters P I and D
* M305 - Set hot chamber PID parameters P I and D
* M306 - Set cooler PID parameters P I and D
* M350 - Set microstepping mode. * M350 - Set microstepping mode.
* M351 - Toggle MS1 MS2 pins directly. * M351 - Toggle MS1 MS2 pins directly.
* M400 - Finish all moves * M400 - Finish all moves
...@@ -130,11 +139,10 @@ ...@@ -130,11 +139,10 @@
* M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal] * M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]
* M605 - Set dual x-carriage movement mode: Smode [ X<duplication x-offset> Rduplication temp offset ] * M605 - Set dual x-carriage movement mode: Smode [ X<duplication x-offset> Rduplication temp offset ]
* M649 - laser set options * M649 - laser set options
* M650 - mUVe peel set peel distance
* M651 - mUVe peel run peel move
* M666 - Set z probe offset or Endstop and delta geometry adjustment. M666 L for list command * M666 - Set z probe offset or Endstop and delta geometry adjustment. M666 L for list command
* M906 - Set motor currents XYZ T0-4 E * M906 - Set motor currents XYZ T0-4 E
* M907 - Set digital trimpot motor current using axis codes. * M907 - Set digital trimpot motor current using axis codes.
* M908 - Control digital trimpot directly. * M908 - Control digital trimpot directly.
* M928 - Start SD logging (M928 filename.g) - ended by M29 * M928 - Start SD logging (M928 filename.g) - ended by M29
* M997 - NPR2 Color rotate
* M999 - Restart after being stopped by error * M999 - Restart after being stopped by error
Documentation/changelog.md
View file @ aa1b69a7
### Version 4.2.83
* Add Cooler and Hot Chamber
* Add Laser Beam PWM and raster base64 ONLY ARDUINO MEGA
### Version 4.2.82 ### Version 4.2.82
* Add DONDOLO_DUAL_MOTOR for DONDOLO bowden and dual extruder * Add DONDOLO_DUAL_MOTOR for DONDOLO bowden and dual extruder
* Add reader TAG width MFRC522 * Add reader TAG width MFRC522
......
MK/Configuration_Store.cpp
View file @ aa1b69a7
...@@ -94,7 +94,10 @@ ...@@ -94,7 +94,10 @@
* *
* PIDTEMPBED: * PIDTEMPBED:
* M304 PID bedKp, bedKi, bedKd * M304 PID bedKp, bedKi, bedKd
* M304 L PID coolerKp, coolerKi, coolerKd * PIDTEMPCHAMBER
* M305 PID chamberKp, chamberKi, chamberKd
* PIDTEMPCOOLER
* M306 PID coolerKp, coolerKi, coolerKd
* *
* DOGLCD: * DOGLCD:
* M250 C lcd_contrast * M250 C lcd_contrast
...@@ -232,6 +235,12 @@ void Config_StoreSettings() { ...@@ -232,6 +235,12 @@ void Config_StoreSettings() {
EEPROM_WRITE_VAR(i, bedKd); EEPROM_WRITE_VAR(i, bedKd);
#endif #endif
#if ENABLED(PIDTEMPCHAMBER)
EEPROM_WRITE_VAR(i, chamberKp);
EEPROM_WRITE_VAR(i, chamberKi);
EEPROM_WRITE_VAR(i, chamberKd);
#endif
#if ENABLED(PIDTEMPCOOLER) #if ENABLED(PIDTEMPCOOLER)
EEPROM_WRITE_VAR(i, coolerKp); EEPROM_WRITE_VAR(i, coolerKp);
EEPROM_WRITE_VAR(i, coolerKi); EEPROM_WRITE_VAR(i, coolerKi);
...@@ -387,13 +396,18 @@ void Config_RetrieveSettings() { ...@@ -387,13 +396,18 @@ void Config_RetrieveSettings() {
EEPROM_READ_VAR(i, bedKd); EEPROM_READ_VAR(i, bedKd);
#endif #endif
#if ENABLED(PIDTEMPCHAMBER)
EEPROM_READ_VAR(i, chamberKp);
EEPROM_READ_VAR(i, chamberKi);
EEPROM_READ_VAR(i, chamberKd);
#endif
#if ENABLED(PIDTEMPCOOLER) #if ENABLED(PIDTEMPCOOLER)
EEPROM_READ_VAR(i, coolerKp); EEPROM_READ_VAR(i, coolerKp);
EEPROM_READ_VAR(i, coolerKi); EEPROM_READ_VAR(i, coolerKi);
EEPROM_READ_VAR(i, coolerKd); EEPROM_READ_VAR(i, coolerKd);
#endif #endif
#if HASNT(LCD_CONTRAST) #if HASNT(LCD_CONTRAST)
int lcd_contrast; int lcd_contrast;
#endif #endif
...@@ -588,13 +602,18 @@ void Config_ResetDefault() { ...@@ -588,13 +602,18 @@ void Config_ResetDefault() {
bedKd = scalePID_d(DEFAULT_bedKd); bedKd = scalePID_d(DEFAULT_bedKd);
#endif #endif
#if ENABLED(PIDTEMPCHAMBER)
chamberKp = DEFAULT_chamberKp;
chamberKi = scalePID_i(DEFAULT_chamberKi);
chamberKd = scalePID_d(DEFAULT_chamberKd);
#endif
#if ENABLED(PIDTEMPCOOLER) #if ENABLED(PIDTEMPCOOLER)
coolerKp = DEFAULT_coolerKp; coolerKp = DEFAULT_coolerKp;
coolerKi = scalePID_i(DEFAULT_coolerKi); coolerKi = scalePID_i(DEFAULT_coolerKi);
coolerKd = scalePID_d(DEFAULT_coolerKd); coolerKd = scalePID_d(DEFAULT_coolerKd);
#endif #endif
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
autoretract_enabled = false; autoretract_enabled = false;
retract_length = RETRACT_LENGTH; retract_length = RETRACT_LENGTH;
...@@ -797,7 +816,7 @@ void Config_ResetDefault() { ...@@ -797,7 +816,7 @@ void Config_ResetDefault() {
ECHO_EM(" (Material GUM)"); ECHO_EM(" (Material GUM)");
#endif // ULTIPANEL #endif // ULTIPANEL
#if ENABLED(PIDTEMP) || ENABLED(PIDTEMPBED) || ENABLED(PIDTEMPCOOLER) #if ENABLED(PIDTEMP) || ENABLED(PIDTEMPBED) || ENABLED(PIDTEMPCHAMBER) || ENABLED(PIDTEMPCOOLER)
if (!forReplay) { if (!forReplay) {
ECHO_LM(CFG, "PID settings:"); ECHO_LM(CFG, "PID settings:");
} }
...@@ -817,12 +836,17 @@ void Config_ResetDefault() { ...@@ -817,12 +836,17 @@ void Config_ResetDefault() {
#endif #endif
#endif #endif
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)
ECHO_SMV(CFG, " M304 P", bedKp); // for compatibility with hosts, only echos values for E0 ECHO_SMV(CFG, " M304 P", bedKp);
ECHO_MV(" I", unscalePID_i(bedKi)); ECHO_MV(" I", unscalePID_i(bedKi));
ECHO_EMV(" D", unscalePID_d(bedKd)); ECHO_EMV(" D", unscalePID_d(bedKd));
#endif #endif
#if ENABLED(PIDTEMPCHAMBER)
ECHO_SMV(CFG, " M305 P", chamberKp);
ECHO_MV(" I", unscalePID_i(chamberKi));
ECHO_EMV(" D", unscalePID_d(chamberKd));
#endif
#if ENABLED(PIDTEMPCOOLER) #if ENABLED(PIDTEMPCOOLER)
ECHO_SMV(CFG, " M304 C P", coolerKp); // for compatibility with hosts, only echos values for E0 ECHO_SMV(CFG, " M306 P", coolerKp);
ECHO_MV(" I", unscalePID_i(coolerKi)); ECHO_MV(" I", unscalePID_i(coolerKi));
ECHO_EMV(" D", unscalePID_d(coolerKd)); ECHO_EMV(" D", unscalePID_d(coolerKd));
#endif #endif
......
MK/MK.ino
View file @ aa1b69a7
...@@ -12,11 +12,11 @@ ...@@ -12,11 +12,11 @@
* *
* This program is distributed in the hope that it will be useful, * This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of * but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details. * GNU General Public License for more details.
* *
* You should have received a copy of the GNU General Public License * You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
*/ */
/** /**
...@@ -38,12 +38,12 @@ ...@@ -38,12 +38,12 @@
* G1 - Coordinated Movement X Y Z E, for laser move by firing * G1 - Coordinated Movement X Y Z E, for laser move by firing
* G2 - CW ARC * G2 - CW ARC
* G3 - CCW ARC * G3 - CCW ARC
* G4 - Dwell S<seconds> or P<milliseconds> * G4 - Dwell S[seconds] or P[milliseconds], delay in Second or Millisecond
* G5 - Bezier curve - from http://forums.reprap.org/read.php?147,93577 * G5 - Bezier curve - from http://forums.reprap.org/read.php?147,93577
* G7 - Execute laser raster line * G7 - Laser raster base64
* G10 - retract filament according to settings of M207 * G10 - retract filament according to settings of M207
* G11 - retract recover filament according to settings of M208 * G11 - retract recover filament according to settings of M208
* G28 - Home one or more axes * G28 - X Y Z Home all Axis. M for bed manual setting with LCD. B return to back point
* G29 - Detailed Z-Probe, probes the bed at 3 or more points. Will fail if you haven't homed yet. * G29 - Detailed Z-Probe, probes the bed at 3 or more points. Will fail if you haven't homed yet.
* G30 - Single Z Probe, probes bed at current XY location. - Bed Probe and Delta geometry Autocalibration * G30 - Single Z Probe, probes bed at current XY location. - Bed Probe and Delta geometry Autocalibration
* G31 - Dock sled (Z_PROBE_SLED only) * G31 - Dock sled (Z_PROBE_SLED only)
...@@ -98,15 +98,15 @@ ...@@ -98,15 +98,15 @@
* M98 - Print Hysteresis value * M98 - Print Hysteresis value
* M99 - Set Hysteresis parameter M99 X<in mm> Y<in mm> Z<in mm> E<in mm> * M99 - Set Hysteresis parameter M99 X<in mm> Y<in mm> Z<in mm> E<in mm>
* M100 - Watch Free Memory (For Debugging Only) * M100 - Watch Free Memory (For Debugging Only)
* M104 - Set extruder target temp * M104 - Set hotend target temp
* M105 - Read current temp * M105 - Read current temp
* M106 - Fan on * M106 - Fan on
* M107 - Fan off * M107 - Fan off
* M109 - Sxxx Wait for extruder current temp to reach target temp. Waits only when heating * M109 - Sxxx Wait for hotend current temp to reach target temp. Waits only when heating
* Rxxx Wait for extruder current temp to reach target temp. Waits when heating and cooling * Rxxx Wait for hotend current temp to reach target temp. Waits when heating and cooling
* IF AUTOTEMP is enabled, S<mintemp> B<maxtemp> F<factor>. Exit autotemp by any M109 without F * IF AUTOTEMP is enabled, S<mintemp> B<maxtemp> F<factor>. Exit autotemp by any M109 without F
* M110 - Set the current line number * M110 - Set the current line number
* M111 - Set debug flags with S<mask>. See flag bits defined in Marlin.h. * M111 - Set debug flags with S<mask>.
* M112 - Emergency stop * M112 - Emergency stop
* M114 - Output current position to serial port * M114 - Output current position to serial port
* M115 - Capabilities string * M115 - Capabilities string
...@@ -119,15 +119,20 @@ ...@@ -119,15 +119,20 @@
* M127 - Solenoid Air Valve Closed (BariCUDA vent to atmospheric pressure by jmil) * M127 - Solenoid Air Valve Closed (BariCUDA vent to atmospheric pressure by jmil)
* M128 - EtoP Open (BariCUDA EtoP = electricity to air pressure transducer by jmil) * M128 - EtoP Open (BariCUDA EtoP = electricity to air pressure transducer by jmil)
* M129 - EtoP Closed (BariCUDA EtoP = electricity to air pressure transducer by jmil) * M129 - EtoP Closed (BariCUDA EtoP = electricity to air pressure transducer by jmil)
* M140 - Set bed or cooler target temp * M140 - Set hot bed target temp
* M141 - Set hot chamber target temp
* M142 - Set cooler target temp
* M145 - Set the heatup state H<hotend> B<bed> F<fan speed> for S<material> (0=PLA, 1=ABS) * M145 - Set the heatup state H<hotend> B<bed> F<fan speed> for S<material> (0=PLA, 1=ABS)
* M150 - Set BlinkM Color Output R: Red<0-255> U(!): Green<0-255> B: Blue<0-255> over i2c, G for green does not work. * M150 - Set BlinkM Color Output R: Red<0-255> U(!): Green<0-255> B: Blue<0-255> over i2c, G for green does not work.
* M163 - Set a single proportion for a mixing extruder. Requires COLOR_MIXING_EXTRUDER. * M163 - Set a single proportion for a mixing extruder. Requires COLOR_MIXING_EXTRUDER.
* M164 - Save the mix as a virtual extruder. Requires COLOR_MIXING_EXTRUDER and MIXING_VIRTUAL_TOOLS. * M164 - Save the mix as a virtual extruder. Requires COLOR_MIXING_EXTRUDER and MIXING_VIRTUAL_TOOLS.
* M165 - Set the proportions for a mixing extruder. Use parameters ABCDHI to set the mixing factors. Requires COLOR_MIXING_EXTRUDER. * M165 - Set the proportions for a mixing extruder. Use parameters ABCDHI to set the mixing factors. Requires COLOR_MIXING_EXTRUDER.
* M190 - Sxxx Wait for bed or cooler current temp to reach target temp. Waits only when heating Waits only when heating bed or cooling cooler * M190 - Sxxx Wait for bed current temp to reach target temp. Waits only when heating
* Rxxx Wait for bed or cooler current temp to reach target temp. Waits when heating and cooling * Rxxx Wait for bed current temp to reach target temp. Waits when heating and cooling
* C parameter select Cooler, omitting it selec bed. * M191 - Sxxx Wait for chamber current temp to reach target temp. Waits only when heating
* Rxxx Wait for chamber current temp to reach target temp. Waits when heating and cooling
* M192 - Sxxx Wait for cooler current temp to reach target temp. Waits only when heating
* Rxxx Wait for cooler current temp to reach target temp. Waits when heating and cooling
* M200 - set filament diameter and set E axis units to cubic millimeters (use S0 to set back to millimeters).:D<millimeters>- * M200 - set filament diameter and set E axis units to cubic millimeters (use S0 to set back to millimeters).:D<millimeters>-
* M201 - Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000) * M201 - Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000)
* M202 - Set max acceleration in units/s^2 for travel moves (M202 X1000 Y1000) Unused in Marlin!! * M202 - Set max acceleration in units/s^2 for travel moves (M202 X1000 Y1000) Unused in Marlin!!
...@@ -140,8 +145,8 @@ ...@@ -140,8 +145,8 @@
* M209 - S<1=true/0=false> enable automatic retract detect if the slicer did not support G10/11: every normal extrude-only move will be classified as retract depending on the direction. * M209 - S<1=true/0=false> enable automatic retract detect if the slicer did not support G10/11: every normal extrude-only move will be classified as retract depending on the direction.
* M218 - Set hotend offset (in mm): T<extruder_number> X<offset_on_X> Y<offset_on_Y> * M218 - Set hotend offset (in mm): T<extruder_number> X<offset_on_X> Y<offset_on_Y>
* M220 - Set speed factor override percentage: S<factor in percent> * M220 - Set speed factor override percentage: S<factor in percent>
* M221 - Set extrude factor override percentage: S<factor in percent> * M221 - T<extruder> S<factor in percent> - set extrude factor override percentage
* M222 - Set density extrusion percentage for purge: S<factor in percent> * M222 - T<extruder> S<factor in percent> - set density extrude factor percentage for purge
* M226 - Wait until the specified pin reaches the state required: P<pin number> S<pin state> * M226 - Wait until the specified pin reaches the state required: P<pin number> S<pin state>
* M240 - Trigger a camera to take a photograph * M240 - Trigger a camera to take a photograph
* M250 - Set LCD contrast C<contrast value> (value 0..63) * M250 - Set LCD contrast C<contrast value> (value 0..63)
...@@ -150,7 +155,9 @@ ...@@ -150,7 +155,9 @@
* M301 - Set PID parameters P I D and C * M301 - Set PID parameters P I D and C
* M302 - Allow cold extrudes, or set the minimum extrude S<temperature>. * M302 - Allow cold extrudes, or set the minimum extrude S<temperature>.
* M303 - PID relay autotune S<temperature> sets the target temperature (default target temperature = 150C). H<hotend> C<cycles> U<Apply result> * M303 - PID relay autotune S<temperature> sets the target temperature (default target temperature = 150C). H<hotend> C<cycles> U<Apply result>
* M304 - Set bed PID parameters P I and D or cooling if C parameter * M304 - Set hot bed PID parameters P I and D
* M305 - Set hot chamber PID parameters P I and D
* M306 - Set cooler PID parameters P I and D
* M350 - Set microstepping mode. * M350 - Set microstepping mode.
* M351 - Toggle MS1 MS2 pins directly. * M351 - Toggle MS1 MS2 pins directly.
* M380 - Activate solenoid on active extruder * M380 - Activate solenoid on active extruder
...@@ -175,8 +182,6 @@ ...@@ -175,8 +182,6 @@
* M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal] * M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]
* M605 - Set dual x-carriage movement mode: S<mode> [ X<duplication x-offset> R<duplication temp offset> ] * M605 - Set dual x-carriage movement mode: S<mode> [ X<duplication x-offset> R<duplication temp offset> ]
* M649 - laser set options * M649 - laser set options
* M650 - mUVe peel set peel distance
* M651 - mUVe peel run peel move
* M666 - Set z probe offset or Endstop and delta geometry adjustment * M666 - Set z probe offset or Endstop and delta geometry adjustment
* M906 - Set motor currents XYZ T0-4 E * M906 - Set motor currents XYZ T0-4 E
* M907 - Set digital trimpot motor current using axis codes. * M907 - Set digital trimpot motor current using axis codes.
......
MK/module/HAL/HAL.h
View file @ aa1b69a7
...@@ -32,11 +32,11 @@ ...@@ -32,11 +32,11 @@
* *
* This program is distributed in the hope that it will be useful, * This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of * but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details. * GNU General Public License for more details.
* *
* You should have received a copy of the GNU General Public License * You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
* *
* Description: *** HAL for Arduino *** * Description: *** HAL for Arduino ***
...@@ -92,16 +92,16 @@ ...@@ -92,16 +92,16 @@
inline void protect() { inline void protect() {
cli(); cli();
} }
inline void unprotect() { inline void unprotect() {
SREG = sreg; SREG = sreg;
} }
inline InterruptProtectedBlock(bool later = false) { inline InterruptProtectedBlock(bool later = false) {
sreg = SREG; sreg = SREG;
if (!later) cli(); if (!later) cli();
} }
inline ~InterruptProtectedBlock() { inline ~InterruptProtectedBlock() {
SREG = sreg; SREG = sreg;
} }
......
MK/module/HAL/HardwareSerial.h
View file @ aa1b69a7
/* /**
HardwareSerial.h - Hardware serial library for Wiring * MK & MK4due 3D Printer Firmware
Copyright (c) 2006 Nicholas Zambetti. All right reserved. *
* Based on Marlin, Sprinter and grbl
This library is free software; you can redistribute it and/or * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
modify it under the terms of the GNU Lesser General Public * Copyright (C) 2013 - 2016 Alberto Cotronei @MagoKimbra
License as published by the Free Software Foundation; either *
version 2.1 of the License, or (at your option) any later version. * This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
This library is distributed in the hope that it will be useful, * the Free Software Foundation, either version 3 of the License, or
but WITHOUT ANY WARRANTY; without even the implied warranty of * (at your option) any later version.
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU *
Lesser General Public License for more details. * This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
You should have received a copy of the GNU Lesser General Public * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
License along with this library; if not, write to the Free Software * GNU General Public License for more details.
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA *
* You should have received a copy of the GNU General Public License
Modified 28 September 2010 by Mark Sproul * along with this program. If not, see <http://www.gnu.org/licenses/>.
*/ *
*/
/**
* HardwareSerial.h - Hardware serial library for Wiring
* Copyright (c) 2006 Nicholas Zambetti. All right reserved.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Modified 28 September 2010 by Mark Sproul
* Modified 3 March 2015 by MagoKimbra
*/
#ifndef HardwareSerial_H #ifndef HardwareSerial_H
#define HardwareSerial_H #define HardwareSerial_H
......
MK/module/HAL/fastio.h
View file @ aa1b69a7
...@@ -12,11 +12,11 @@ ...@@ -12,11 +12,11 @@
* *
* This program is distributed in the hope that it will be useful, * This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of * but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details. * GNU General Public License for more details.
* *
* You should have received a copy of the GNU General Public License * You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
......
MK/module/MK_Main.cpp
View file @ aa1b69a7
This diff is collapsed.
MK/module/boards/403.h
View file @ aa1b69a7
...@@ -13,7 +13,9 @@ ...@@ -13,7 +13,9 @@
#if MB(RAMPS_FD_V1) #if MB(RAMPS_FD_V1)
#define RAMPS_FD_V1 #define RAMPS_FD_V1
#define INVERTED_HEATER_PINS #define INVERTED_HEATER_PINS
#define INVERTED_BED_PINS #define INVERTED_BED_PIN
#define INVERTED_CHAMBER_PIN
#define INVERTED_COOLER_PIN
// No EEPROM // No EEPROM
// Use 4k7 thermistor tables // Use 4k7 thermistor tables
#else #else
......
MK/module/boards/404.h
View file @ aa1b69a7
...@@ -13,7 +13,9 @@ ...@@ -13,7 +13,9 @@
#if MB(RAMPS_FD_V1) #if MB(RAMPS_FD_V1)
#define RAMPS_FD_V1 #define RAMPS_FD_V1
#define INVERTED_HEATER_PINS #define INVERTED_HEATER_PINS
#define INVERTED_BED_PINS #define INVERTED_BED_PIN
#define INVERTED_CHAMBER_PIN
#define INVERTED_COOLER_PIN
// No EEPROM // No EEPROM
// Use 4k7 thermistor tables // Use 4k7 thermistor tables
#else #else
......
MK/module/language/language_en.h
View file @ aa1b69a7
...@@ -184,6 +184,8 @@ ...@@ -184,6 +184,8 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR" #define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR" #define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR" #define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_CHAMBER "MAXTEMP CHAMBER ERROR"
#define MSG_ERR_MINTEMP_CHAMBER "MINTEMP CHAMBER ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR" #define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR" #define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days" #define MSG_END_DAY "days"
......
MK/module/language/language_it.h
View file @ aa1b69a7
...@@ -181,6 +181,8 @@ ...@@ -181,6 +181,8 @@
#define MSG_ERR_MINTEMP "Err: TEMP MINIMA" #define MSG_ERR_MINTEMP "Err: TEMP MINIMA"
#define MSG_ERR_MAXTEMP_BED "Err: TEMP MASSIMA PIATTO" #define MSG_ERR_MAXTEMP_BED "Err: TEMP MASSIMA PIATTO"
#define MSG_ERR_MINTEMP_BED "Err: TEMP MINIMA PIATTO" #define MSG_ERR_MINTEMP_BED "Err: TEMP MINIMA PIATTO"
#define MSG_ERR_MAXTEMP_CHAMBER "MAXTEMP CHAMBER ERROR"
#define MSG_ERR_MINTEMP_CHAMBER "MINTEMP CHAMBER ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR" #define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR" #define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "giorni" #define MSG_END_DAY "giorni"
...@@ -246,7 +248,6 @@ ...@@ -246,7 +248,6 @@
#define MSG_COOLER_COOLING "Raffreddamento..." #define MSG_COOLER_COOLING "Raffreddamento..."
#define MSG_COOLER_DONE "Raffreddamento finito." #define MSG_COOLER_DONE "Raffreddamento finito."
// Extra // Extra
#define MSG_LASER "Laser Preset" #define MSG_LASER "Laser Preset"
#define MSG_CONFIG "Configurazione" #define MSG_CONFIG "Configurazione"
......
MK/module/printcounter/printcounter.cpp
View file @ aa1b69a7
...@@ -165,6 +165,7 @@ bool PrintCounter::stop() { ...@@ -165,6 +165,7 @@ bool PrintCounter::stop() {
this->data.completePrints++; this->data.completePrints++;
this->data.printTime += this->deltaDuration(); this->data.printTime += this->deltaDuration();
this->saveStats(); this->saveStats();
return true;
} }
else return false; else return false;
} }
......
MK/module/sensor/flowmeter.cpp 0 → 100644
View file @ aa1b69a7
/**
* MK & MK4due 3D Printer Firmware
*
* Based on Marlin, Sprinter and grbl
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (C) 2013 - 2016 Alberto Cotronei @MagoKimbra
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* flowmeter.h - Flowmeter control library for Arduino - Version 1
* Copyright (c) 2016 Franco (nextime) Lanza. All right reserved.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 3 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "../../base.h"
#include <Arduino.h>
#if ENABLED(FLOWMETER_SENSOR)
volatile int flowrate_pulsecount;
float flowrate;
static millis_t flowmeter_timer = 0;
static millis_t lastflow = 0;
void flowrate_pulsecounter();
void flow_init() {
flowrate = 0;
flowrate_pulsecount = 0;
pinMode(FLOWMETER_PIN, INPUT);
attachInterrupt(digitalPinToInterrupt(FLOWMETER_PIN), flowrate_pulsecounter, FALLING);
}
void flowrate_manage() {
millis_t now;
now = millis();
if(ELAPSED(now, flowmeter_timer)) {
detachInterrupt(digitalPinToInterrupt(FLOWMETER_PIN));
flowrate = (float)(((1000.0 / (float)((float)now - (float)lastflow)) * (float)flowrate_pulsecount) / (float)FLOWMETER_CALIBRATION);
#if ENABLED(FLOWMETER_DEBUG)
ECHO_M(" FLOWMETER DEBUG ");
ECHO_MV(" flowrate:", flowrate);
ECHO_MV(" flowrate_pulsecount:", flowrate_pulsecount);
ECHO_EMV(" CALIBRATION:", FLOWMETER_CALIBRATION);
#endif
flowmeter_timer = now + 1000UL;
lastflow = now;
flowrate_pulsecount = 0;
attachInterrupt(digitalPinToInterrupt(FLOWMETER_PIN), flowrate_pulsecounter, FALLING);
}
}
float get_flowrate() {
return flowrate;
}
void flowrate_pulsecounter() {
// Increment the pulse counter
flowrate_pulsecount++;
}
#endif // FLOWMETER_SENSOR
MK/module/sensor/flowmeter.h 0 → 100644
View file @ aa1b69a7
/**
* MK & MK4due 3D Printer Firmware
*
* Based on Marlin, Sprinter and grbl
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (C) 2013 - 2016 Alberto Cotronei @MagoKimbra
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* flowmeter.h - Flowmeter control library for Arduino - Version 1
* Copyright (c) 2016 Franco (nextime) Lanza. All right reserved.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 3 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef FLOWMETER_H
#define FLOWMETER_H
#define FLOWMETER_CALIBRATION (FLOWMETER_MAXFREQ / FLOWMETER_MAXFLOW)
#if ENABLED(FLOWMETER_SENSOR)
void flowrate_manage();
void flow_init();
float get_flowrate();
#endif
#endif // FLOWMETER_H
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment