Fix EEPROM write

MarlinKimbra/Configuration.h

@@ -21,10 +21,10 @@
 // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
 // build by the user have been successfully uploaded into firmware.
 #define STRING_VERSION "4.0.2"
-#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__                 // build date and time
 #define STRING_URL "reprap.org"
-#define STRING_CONFIG_H_AUTHOR "(MagoKimbra: magokimbra@hotmail.com)" // Who made the changes.
-#define STRING_SPLASH "v" STRING_VERSION " - " STRING_URL             // will be shown during bootup
+#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__     // build date and time
+#define STRING_CONFIG_H_AUTHOR "(none, default config)"   // Who made the changes.
+#define STRING_SPLASH "v" STRING_VERSION " - " STRING_URL // will be shown during bootup
 
 // SERIAL_PORT selects which serial port should be used for communication with the host.
 // This allows the connection of wireless adapters (for instance) to non-default port pins.
@@ -292,34 +292,40 @@
 #define PREVENT_LENGTHY_EXTRUDE
 
 #define EXTRUDE_MINTEMP 170 // degC
-// Prevent extrusion of very large distances.
-#define EXTRUDE_MAXLENGTH (X_MAX_LENGTH+Y_MAX_LENGTH) // mm
-
-//================== Thermal Runaway Protection ==============================
-// This is a feature to protect your printer from burn up in flames if it has
-// a thermistor coming off place (this happened to a friend of mine recently and
-// motivated me writing this feature).
-// The issue: If a thermistor come off, it will read a lower temperature than actual.
-// The system will turn the heater on forever, burning up the filament and anything
-// else around.
-// After the temperature reaches the target for the first time, this feature will 
-// start measuring for how long the current temperature stays below the target 
-// minus _HYSTERESIS (set_temperature - THERMAL_RUNAWAY_PROTECTION_HYSTERESIS).
-// If it stays longer than _PERIOD, it means the thermistor temperature
-// cannot catch up with the target, so something *may be* wrong. Then, to be on the
-// safe side, the system will he halt.
-// Bear in mind the count down will just start AFTER the first time the 
-// thermistor temperature is over the target, so you will have no problem if
-// your extruder heater takes 2 minutes to hit the target on heating.
+#define EXTRUDE_MAXLENGTH (X_MAX_LENGTH+Y_MAX_LENGTH) //prevent extrusion of very large distances.
 
+/*================== Thermal Runaway Protection ==============================
+This is a feature to protect your printer from burn up in flames if it has
+a thermistor coming off place (this happened to a friend of mine recently and
+motivated me writing this feature).
+
+The issue: If a thermistor come off, it will read a lower temperature than actual.
+The system will turn the heater on forever, burning up the filament and anything
+else around.
+
+After the temperature reaches the target for the first time, this feature will 
+start measuring for how long the current temperature stays below the target 
+minus _HYSTERESIS (set_temperature - THERMAL_RUNAWAY_PROTECTION_HYSTERESIS).
+
+If it stays longer than _PERIOD, it means the thermistor temperature
+cannot catch up with the target, so something *may be* wrong. Then, to be on the
+safe side, the system will he halt.
+
+Bear in mind the count down will just start AFTER the first time the 
+thermistor temperature is over the target, so you will have no problem if
+your extruder heater takes 2 minutes to hit the target on heating.
+
+*/
 // If you want to enable this feature for all your extruder heaters,
 // uncomment the 2 defines below:
+
 // Parameters for all extruder heaters
 //#define THERMAL_RUNAWAY_PROTECTION_PERIOD 40 //in seconds
 //#define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS 4 // in degree Celsius
 
 // If you want to enable this feature for your bed heater,
 // uncomment the 2 defines below:
+
 // Parameters for the bed heater
 //#define THERMAL_RUNAWAY_PROTECTION_BED_PERIOD 20 //in seconds
 //#define THERMAL_RUNAWAY_PROTECTION_BED_HYSTERESIS 2 // in degree Celsius

MarlinKimbra/Configuration_adv.h

@@ -80,7 +80,8 @@
 #define EXTRUDER_2_AUTO_FAN_PIN -1
 #define EXTRUDER_3_AUTO_FAN_PIN -1
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
-#define EXTRUDER_AUTO_FAN_SPEED 255
+#define EXTRUDER_AUTO_FAN_SPEED 255  // == full speed
+
 
 //===========================================================================
 //=============================Mechanical Settings===========================

MarlinKimbra/language.h

@@ -152,6 +152,8 @@
 #define MSG_BABYSTEPPING_Z                  "Babystepping Z"
 #define MSG_SERIAL_ERROR_MENU_STRUCTURE     "Error in menu structure"
 
+#define MSG_ERR_EEPROM_WRITE                "Error writing to EEPROM!"
+
 // LCD Menu Messages
 #include "language_en.h"