Fix DebugLevel

MarlinKimbra/Marlin.h

@@ -317,9 +317,6 @@ enum DebugFlags {
   DEBUG_COMMUNICATION = BIT(4)
 };
 extern uint8_t debugLevel;
-extern inline bool debugDryrun() {
-  return ((debugLevel & 8) != 0);
-}
 
 #ifdef FIRMWARE_TEST
   void FirmwareTest();

MarlinKimbra/Marlin_main.cpp

@@ -219,7 +219,7 @@
 
 bool Running = true;
 
-uint8_t debugLevel = DEBUG_INFO|DEBUG_DRYRUN;
+uint8_t debugLevel = DEBUG_INFO|DEBUG_COMMUNICATION;
 
 static float feedrate = 1500.0, next_feedrate, saved_feedrate;
 float current_position[NUM_AXIS] = { 0.0 };
@@ -4110,7 +4110,7 @@ inline void gcode_M92() {
  */
 inline void gcode_M104() {
   if (setTargetedHotend(104)) return;
-  if (debugDryrun()) return;
+  if (debugLevel & DEBUG_DRYRUN) return;
   #if HOTENDS == 1
     if (target_extruder != active_extruder) return;
   #endif
@@ -4197,7 +4197,7 @@ inline void gcode_M105() {
  */
 inline void gcode_M109() {
   if (setTargetedHotend(109)) return;
-  if (debugDryrun()) return;
+  if (debugLevel & DEBUG_DRYRUN) return;
   #if HOTENDS == 1
     if (target_extruder != active_extruder) return;
   #endif
@@ -4229,8 +4229,11 @@ inline void gcode_M109() {
  */
 inline void gcode_M111() {
   debugLevel = code_seen('S') ? code_value_short() : DEBUG_INFO|DEBUG_COMMUNICATION;
-  if (debugDryrun()) {
-    ECHO_LM(DB, MSG_DRYRUN_ENABLED);
+  if (debugLevel & DEBUG_ECHO) ECHO_LM(DB, MSG_DEBUG_ECHO);
+  //if (debugLevel & DEBUG_INFO) ECHO_LM(DB, MSG_DEBUG_INFO);
+  //if (debugLevel & DEBUG_ERRORS) ECHO_LM(DB, MSG_DEBUG_ERRORS);
+  if (debugLevel & DEBUG_DRYRUN) {
+    ECHO_LM(DB, MSG_DEBUG_DRYRUN);
     setTargetBed(0);
     for (int8_t cur_hotend = 0; cur_hotend < HOTENDS; ++cur_hotend) {
       setTargetHotend(0, cur_hotend);
@@ -4390,7 +4393,7 @@ inline void gcode_M121() { enable_endstops(true); }
  * M140: Set bed temperature
  */
 inline void gcode_M140() {
-  if (debugDryrun()) return;
+  if (debugLevel & DEBUG_DRYRUN) return;
   if (code_seen('S')) setTargetBed(code_value());
 }
 
@@ -4485,7 +4488,7 @@ inline void gcode_M140() {
    *       Rxxx Wait for bed current temp to reach target temp. Waits when heating and cooling
    */
   inline void gcode_M190() {
-    if (debugDryrun()) return;
+    if (debugLevel & DEBUG_DRYRUN) return;
     LCD_MESSAGEPGM(MSG_BED_HEATING);
     no_wait_for_cooling = code_seen('S');
     if (no_wait_for_cooling || code_seen('R'))
@@ -6330,7 +6333,7 @@ void clamp_to_software_endstops(float target[3]) {
 
   inline float prevent_dangerous_extrude(float &curr_e, float &dest_e) {
     float de = dest_e - curr_e;
-    if (debugDryrun()) return de;
+    if (debugLevel & DEBUG_DRYRUN) return de;
     if (de) {
       if (degHotend(active_extruder) < extrude_min_temp) {
         curr_e = dest_e; // Behave as if the move really took place, but ignore E part
@@ -6785,7 +6788,7 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) {
   #endif
 
   #ifdef IDLE_OOZING_PREVENT
-    if (degHotend(active_extruder) > IDLE_OOZING_MINTEMP && !debugDryrun() && !axis_is_moving && idleoozing_enabled) {
+    if (degHotend(active_extruder) > IDLE_OOZING_MINTEMP && !(debugLevel & DEBUG_DRYRUN) && !axis_is_moving && idleoozing_enabled) {
       #ifdef FILAMENTCHANGEENABLE
         if (!filament_changing)
       #endif

MarlinKimbra/language.h

@@ -222,12 +222,11 @@
 #define MSG_MAXTEMP_EXTRUDER_OFF            ": Extruder" MSG_SWITCHED_OFF_MAX
 #define MSG_MAXTEMP_BED_OFF                 "Heated bed" MSG_SWITCHED_OFF_MAX
 
-#define MSG_ENDSTOP_XS                        "X"
-#define MSG_ENDSTOP_YS                        "Y"
-#define MSG_ENDSTOP_ZS                        "Z"
-#define MSG_ENDSTOP_ZPS                       "ZP"
-#define MSG_ENDSTOP_ES                        "E"
-
+#define MSG_ENDSTOP_XS                      "X"
+#define MSG_ENDSTOP_YS                      "Y"
+#define MSG_ENDSTOP_ZS                      "Z"
+#define MSG_ENDSTOP_ZPS                     "ZP"
+#define MSG_ENDSTOP_ES                      "E"
 
 //watchdog.cpp
 #define MSG_WATCHDOG_RESET                  "Something is wrong, please turn off the printer."
@@ -239,7 +238,6 @@
 #define MSG_BED_LEVELLING_X                 " X: "
 #define MSG_BED_LEVELLING_Y                 " Y: "
 #define MSG_BED_LEVELLING_Z                 " Z: "
-#define MSG_DRYRUN_ENABLED                  "DEBUG DRYRUN ENABLED"
 
 // LCD Menu Messages
 

MarlinKimbra/language_en.h

@@ -152,6 +152,10 @@
 #define MSG_ERR_MINTEMP                     "Err: MINTEMP"
 #define MSG_ERR_MAXTEMP_BED                 "Err: MAXTEMP BED"
 
+#define MSG_DEBUG_ECHO                      "DEBUG ECHO ENABLED"
+#define MSG_DEBUG_INFO                      "DEBUG INFO ENABLED"
+#define MSG_DEBUG_ERRORS                    "DEBUG ERRORS ENABLED"
+#define MSG_DEBUG_DRYRUN                    "DEBUG DRYRUN ENABLED"
 
 #ifdef DELTA
   #define MSG_DELTA_CALIBRATE               "Delta Calibration"

MarlinKimbra/language_it.h

@@ -52,6 +52,7 @@
 #define MSG_EXTRUDE                         "Estrudi"
 #define MSG_RETRACT                         "Ritrai"
 #define MSG_MOVE_AXIS                       "Muovi Asse"
+#define MSG_LEVEL_BED                       "Level bed"
 #define MSG_MOVE_X                          "Muovi X"
 #define MSG_MOVE_Y                          "Muovi Y"
 #define MSG_MOVE_Z                          "Muovi Z"
@@ -59,15 +60,15 @@
 #define MSG_MOVE_01MM                       "Muovi di 0.1mm"
 #define MSG_MOVE_1MM                        "Muovi di   1mm"
 #define MSG_MOVE_10MM                       "Muovi di  10mm"
-#define MSG_SPEED                           "Velcità"
+#define MSG_SPEED                           "Velocità"
 #define MSG_NOZZLE                          "Ugello"
 #define MSG_BED                             "Piatto"
 #define MSG_FAN_SPEED                       "Ventola"
 #define MSG_FLOW                            "Flusso"
 #define MSG_CONTROL                         "Controllo"
-#define MSG_MIN                             LCD_STR_THERMOMETER " Min"
-#define MSG_MAX                             LCD_STR_THERMOMETER " Max"
-#define MSG_FACTOR                          LCD_STR_THERMOMETER " Fact"
+#define MSG_MIN                             " "LCD_STR_THERMOMETER " Min"
+#define MSG_MAX                             " "LCD_STR_THERMOMETER " Max"
+#define MSG_FACTOR                          " "LCD_STR_THERMOMETER " Fact"
 #define MSG_IDLEOOZING                      "Anti oozing"
 #define MSG_AUTOTEMP                        "Autotemp"
 #define MSG_ON                              "On "
@@ -151,6 +152,10 @@
 #define MSG_ERR_MINTEMP                     "Err: MINTEMP"
 #define MSG_ERR_MAXTEMP_BED                 "Err: MAXTEMP BED"
 
+#define MSG_DEBUG_ECHO                      "DEBUG RIPETI"
+#define MSG_DEBUG_INFO                      "DEBUG INFO"
+#define MSG_DEBUG_ERRORS                    "DEBUG ERRORI"
+#define MSG_DEBUG_DRYRUN                    "DEBUG STAMPA A VUOTO"
 
 #ifdef DELTA
   #define MSG_DELTA_CALIBRATE               "Calibraz. Delta"

MarlinKimbra/planner.cpp

@@ -515,7 +515,7 @@ float junction_deviation = 0.1;
         if (extruder != 1)
       #endif // NPR2
         {
-          if (degHotend(extruder) < extrude_min_temp && !debugDryrun()) {
+          if (degHotend(extruder) < extrude_min_temp && !(debugLevel & DEBUG_DRYRUN)) {
             position[E_AXIS] = target[E_AXIS]; //behave as if the move really took place, but ignore E part
             de = 0; // no difference
             ECHO_S(OK);