Skip to content

M
MarlinKimbra
Commit 892f4322 authored by MagoKimbra's avatar MagoKimbra
Browse files
Options

Update Configuration.h

parent eb70d2eb
Hide whitespace changes
Inline Side-by-side
Showing with 11 additions and 11 deletions
MarlinKimbra/Configuration.h
View file @ 892f4322
...@@ -137,7 +137,7 @@ ...@@ -137,7 +137,7 @@
#define POWER_SUPPLY 0 #define POWER_SUPPLY 0
// Define this to have the electronics keep the power supply off on startup. If you don't know what this is leave it. //Define this to have the electronics keep the power supply off on startup. If you don't know what this is leave it.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF
/****************************************************************************** /******************************************************************************
...@@ -163,7 +163,7 @@ ...@@ -163,7 +163,7 @@
* 10 is 100k RS thermistor 198-961 (4.7k pullup) * 10 is 100k RS thermistor 198-961 (4.7k pullup)
* 11 is 100k beta 3950 1% thermistor (4.7k pullup) * 11 is 100k beta 3950 1% thermistor (4.7k pullup)
* 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) * 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
* 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" * 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
* 20 is the PT100 circuit found in the Ultimainboard V2.x * 20 is the PT100 circuit found in the Ultimainboard V2.x
* 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 * 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
* *
...@@ -241,9 +241,9 @@ ...@@ -241,9 +241,9 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// HotEnd{HE0,HE1,HE2,HE3} // HotEnd{HE0,HE1,HE2,HE3}
#define DEFAULT_Kp {41.51,50,0,0} #define DEFAULT_Kp {41.51,41.51,41.51,41.51}
#define DEFAULT_Ki {7.28,15,0,0} #define DEFAULT_Ki {7.28,7.28,7.28,7.28}
#define DEFAULT_Kd {59.17,90,0,0} #define DEFAULT_Kd {59.17,59.17,59.17,59.17}
#endif // PIDTEMP #endif // PIDTEMP
...@@ -577,22 +577,22 @@ ...@@ -577,22 +577,22 @@
// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ // Data from: http://www.doc-diy.net/photo/rc-1_hacked/
//#define PHOTOGRAPH_PIN 23 //#define PHOTOGRAPH_PIN 23
//SF send wrong arc g-codes when using Arc Point as fillet procedure // SF send wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX //#define SF_ARC_FIX
//Support for STEPPERS TOSHIBA // Support for STEPPERS TOSHIBA
//#define CONFIG_STEPPERS_TOSHIBA 1 //#define CONFIG_STEPPERS_TOSHIBA 1
//Support for the BariCUDA Paste Extruder. // Support for the BariCUDA Paste Extruder.
//#define BARICUDA //#define BARICUDA
//define BlinkM/CyzRgb Support // define BlinkM/CyzRgb Support
//#define BLINKM //#define BLINKM
//Setting firmware for FILAMENT END SWITCH // Setting firmware for filament end switch
//#define FILAMENT_END_SWITCH //#define FILAMENT_END_SWITCH
//define laser beam support // define laser beam support
//#define LASERBEAM //#define LASERBEAM
/**********************************************************************\ /**********************************************************************\
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment