// If your configuration is significantly different than this and you don't understand the issues involved, you probably
// If your configuration is significantly different than this and you don't understand the issues involved, you probably
// shouldn't use bed PID until someone else verifies your hardware works.
// shouldn't use bed PID until someone else verifies your hardware works.
// If this is enabled, find your own PID constants below.
// If this is enabled, find your own PID constants below.
//#define PIDTEMPCOOLER
#define PIDTEMPCOOLER
// Enable fast PWM for cooler
#define FAST_PWM_COOLER
//#define COOLER_LIMIT_SWITCHING
//#define COOLER_LIMIT_SWITCHING
#define COOLER_HYSTERESIS 2 //only disable heating if T<target-COOLER_HYSTERESIS and enable heating if T<target+COOLER_HYSTERESIS (works only if COOLER_LIMIT_SWITCHING is enabled)
#define COOLER_HYSTERESIS 2 //only disable heating if T<target-COOLER_HYSTERESIS and enable heating if T<target+COOLER_HYSTERESIS (works only if COOLER_LIMIT_SWITCHING is enabled)
// If this is enabled, find your own PID constants below.
// If this is enabled, find your own PID constants below.
//#define PIDTEMPCOOLER
//#define PIDTEMPCOOLER
// Enable fast PWM for cooler
//#define FAST_PWM_COOLER
//#define COOLER_LIMIT_SWITCHING
//#define COOLER_LIMIT_SWITCHING
#define COOLER_HYSTERESIS 2 //only disable heating if T<target-COOLER_HYSTERESIS and enable heating if T<target+COOLER_HYSTERESIS (works only if COOLER_LIMIT_SWITCHING is enabled)
#define COOLER_HYSTERESIS 2 //only disable heating if T<target-COOLER_HYSTERESIS and enable heating if T<target+COOLER_HYSTERESIS (works only if COOLER_LIMIT_SWITCHING is enabled)
#define COOLER_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
#define COOLER_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
