Skip to content

M
MarlinKimbra
Commit 701efac2 authored by Simone Primarosa's avatar Simone Primarosa
Browse files
Options

Update 4.2.x

parent bd2c245c
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 579 additions and 605 deletions
MarlinKimbra/Marlin.h
View file @ 701efac2
...@@ -25,10 +25,6 @@ ...@@ -25,10 +25,6 @@
#include "Configuration_Basic.h" #include "Configuration_Basic.h"
#include "pins.h" #include "pins.h"
#ifndef SANITYCHECK_H
#error Your Configuration.h and Configuration_adv.h files are outdated!
#endif
#include "Arduino.h" #include "Arduino.h"
typedef unsigned long millis_t; typedef unsigned long millis_t;
......
MarlinKimbra/Marlin_main.cpp
View file @ 701efac2
...@@ -303,12 +303,12 @@ bool target_direction; ...@@ -303,12 +303,12 @@ bool target_direction;
unsigned long printer_usage_seconds; unsigned long printer_usage_seconds;
#if DISABLED(DELTA) #if !MECH(DELTA)
int xy_travel_speed = XY_TRAVEL_SPEED; int xy_travel_speed = XY_TRAVEL_SPEED;
float zprobe_zoffset = 0; float zprobe_zoffset = 0;
#endif #endif
#if ENABLED(Z_DUAL_ENDSTOPS) && DISABLED(DELTA) #if ENABLED(Z_DUAL_ENDSTOPS) && !MECH(DELTA)
float z_endstop_adj = 0; float z_endstop_adj = 0;
#endif #endif
...@@ -863,7 +863,7 @@ void get_command() { ...@@ -863,7 +863,7 @@ void get_command() {
if (drain_queued_commands_P()) return; // priority is given to non-serial commands if (drain_queued_commands_P()) return; // priority is given to non-serial commands
#if ENABLED(NO_TIMEOUTS) #if EXIST(NO_TIMEOUTS)
static millis_t last_command_time = 0; static millis_t last_command_time = 0;
millis_t ms = millis(); millis_t ms = millis();
...@@ -878,7 +878,7 @@ void get_command() { ...@@ -878,7 +878,7 @@ void get_command() {
// //
while (MYSERIAL.available() > 0 && commands_in_queue < BUFSIZE) { while (MYSERIAL.available() > 0 && commands_in_queue < BUFSIZE) {
#if ENABLED(NO_TIMEOUTS) #if EXIST(NO_TIMEOUTS)
last_command_time = ms; last_command_time = ms;
#endif #endif
...@@ -3133,7 +3133,7 @@ inline void gcode_G28() { ...@@ -3133,7 +3133,7 @@ inline void gcode_G28() {
current_position[X_AXIS] = destination[X_AXIS]; current_position[X_AXIS] = destination[X_AXIS];
current_position[Y_AXIS] = destination[Y_AXIS]; current_position[Y_AXIS] = destination[Y_AXIS];
#if DISABLED(SCARA) #if !MECH(SCARA)
current_position[Z_AXIS] = destination[Z_AXIS]; current_position[Z_AXIS] = destination[Z_AXIS];
#endif #endif
...@@ -4887,14 +4887,14 @@ inline void gcode_M105() { ...@@ -4887,14 +4887,14 @@ inline void gcode_M105() {
#endif #endif
ECHO_M(" " MSG_AT); ECHO_M(" " MSG_AT);
#if ENABLED(HOTEND_WATTS) #if EXIST(HOTEND_WATTS)
ECHO_VM((HOTEND_WATTS * getHeaterPower(target_extruder))/127, "W"); ECHO_VM((HOTEND_WATTS * getHeaterPower(target_extruder))/127, "W");
#else #else
ECHO_V(getHeaterPower(target_extruder)); ECHO_V(getHeaterPower(target_extruder));
#endif #endif
ECHO_M(" " MSG_BAT); ECHO_M(" " MSG_BAT);
#if ENABLED(BED_WATTS) #if EXIST(BED_WATTS)
ECHO_VM((BED_WATTS * getHeaterPower(-1))/127, "W"); ECHO_VM((BED_WATTS * getHeaterPower(-1))/127, "W");
#else #else
ECHO_V(getHeaterPower(-1)); ECHO_V(getHeaterPower(-1));
...@@ -5156,9 +5156,9 @@ inline void gcode_M140() { ...@@ -5156,9 +5156,9 @@ inline void gcode_M140() {
if (code_seen('H')) { if (code_seen('H')) {
v = code_value_short(); v = code_value_short();
#if ENABLED(PREVENT_DANGEROUS_EXTRUDE) #if ENABLED(PREVENT_DANGEROUS_EXTRUDE)
plaPreheatHotendTemp = constrain(v, EXTRUDE_MINTEMP, HEATER_0_MAXTEMP - 15); plaPreheatHotendTemp = constrain(v, EXTRUDE_MINTEMP, HEATER_0_MAXTEMP);
#else #else
plaPreheatHotendTemp = constrain(v, HEATER_0_MINTEMP, HEATER_0_MAXTEMP - 15); plaPreheatHotendTemp = constrain(v, HEATER_0_MINTEMP, HEATER_0_MAXTEMP);
#endif #endif
} }
if (code_seen('F')) { if (code_seen('F')) {
...@@ -5168,7 +5168,7 @@ inline void gcode_M140() { ...@@ -5168,7 +5168,7 @@ inline void gcode_M140() {
#if TEMP_SENSOR_BED != 0 #if TEMP_SENSOR_BED != 0
if (code_seen('B')) { if (code_seen('B')) {
v = code_value_short(); v = code_value_short();
plaPreheatHPBTemp = constrain(v, BED_MINTEMP, BED_MAXTEMP - 15); plaPreheatHPBTemp = constrain(v, BED_MINTEMP, BED_MAXTEMP);
} }
#endif #endif
break; break;
...@@ -5176,9 +5176,9 @@ inline void gcode_M140() { ...@@ -5176,9 +5176,9 @@ inline void gcode_M140() {
if (code_seen('H')) { if (code_seen('H')) {
v = code_value_short(); v = code_value_short();
#if ENABLED(PREVENT_DANGEROUS_EXTRUDE) #if ENABLED(PREVENT_DANGEROUS_EXTRUDE)
absPreheatHotendTemp = constrain(v, EXTRUDE_MINTEMP, HEATER_0_MAXTEMP - 15); absPreheatHotendTemp = constrain(v, EXTRUDE_MINTEMP, HEATER_0_MAXTEMP);
#else #else
absPreheatHotendTemp = constrain(v, HEATER_0_MINTEMP, HEATER_0_MAXTEMP - 15); absPreheatHotendTemp = constrain(v, HEATER_0_MINTEMP, HEATER_0_MAXTEMP);
#endif #endif
} }
if (code_seen('F')) { if (code_seen('F')) {
...@@ -5188,7 +5188,7 @@ inline void gcode_M140() { ...@@ -5188,7 +5188,7 @@ inline void gcode_M140() {
#if TEMP_SENSOR_BED != 0 #if TEMP_SENSOR_BED != 0
if (code_seen('B')) { if (code_seen('B')) {
v = code_value_short(); v = code_value_short();
absPreheatHPBTemp = constrain(v, BED_MINTEMP, BED_MAXTEMP - 15); absPreheatHPBTemp = constrain(v, BED_MINTEMP, BED_MAXTEMP);
} }
#endif #endif
break; break;
...@@ -5196,9 +5196,9 @@ inline void gcode_M140() { ...@@ -5196,9 +5196,9 @@ inline void gcode_M140() {
if (code_seen('H')) { if (code_seen('H')) {
v = code_value_short(); v = code_value_short();
#if ENABLED(PREVENT_DANGEROUS_EXTRUDE) #if ENABLED(PREVENT_DANGEROUS_EXTRUDE)
gumPreheatHotendTemp = constrain(v, EXTRUDE_MINTEMP, HEATER_0_MAXTEMP - 15); gumPreheatHotendTemp = constrain(v, EXTRUDE_MINTEMP, HEATER_0_MAXTEMP);
#else #else
gumPreheatHotendTemp = constrain(v, HEATER_0_MINTEMP, HEATER_0_MAXTEMP - 15); gumPreheatHotendTemp = constrain(v, HEATER_0_MINTEMP, HEATER_0_MAXTEMP);
#endif #endif
} }
if (code_seen('F')) { if (code_seen('F')) {
...@@ -5208,7 +5208,7 @@ inline void gcode_M140() { ...@@ -5208,7 +5208,7 @@ inline void gcode_M140() {
#if TEMP_SENSOR_BED != 0 #if TEMP_SENSOR_BED != 0
if (code_seen('B')) { if (code_seen('B')) {
v = code_value_short(); v = code_value_short();
gumPreheatHPBTemp = constrain(v, BED_MINTEMP, BED_MAXTEMP - 15); gumPreheatHPBTemp = constrain(v, BED_MINTEMP, BED_MAXTEMP);
} }
#endif #endif
break; break;
...@@ -6062,7 +6062,7 @@ inline void gcode_M503() { ...@@ -6062,7 +6062,7 @@ inline void gcode_M503() {
//retract by E //retract by E
if (code_seen('E')) destination[E_AXIS] += code_value(); if (code_seen('E')) destination[E_AXIS] += code_value();
#if ENABLED(FILAMENTCHANGE_FIRSTRETRACT) #if EXIST(FILAMENTCHANGE_FIRSTRETRACT)
else destination[E_AXIS] += FILAMENTCHANGE_FIRSTRETRACT; else destination[E_AXIS] += FILAMENTCHANGE_FIRSTRETRACT;
#endif #endif
...@@ -6070,7 +6070,7 @@ inline void gcode_M503() { ...@@ -6070,7 +6070,7 @@ inline void gcode_M503() {
//lift Z //lift Z
if (code_seen('Z')) destination[Z_AXIS] += code_value(); if (code_seen('Z')) destination[Z_AXIS] += code_value();
#if ENABLED(FILAMENTCHANGE_ZADD) #if EXIST(FILAMENTCHANGE_ZADD)
else destination[Z_AXIS] += FILAMENTCHANGE_ZADD; else destination[Z_AXIS] += FILAMENTCHANGE_ZADD;
#endif #endif
...@@ -6078,19 +6078,19 @@ inline void gcode_M503() { ...@@ -6078,19 +6078,19 @@ inline void gcode_M503() {
//move xy //move xy
if (code_seen('X')) destination[X_AXIS] = code_value(); if (code_seen('X')) destination[X_AXIS] = code_value();
#if ENABLED(FILAMENTCHANGE_XPOS) #if EXIST(FILAMENTCHANGE_XPOS)
else destination[X_AXIS] = FILAMENTCHANGE_XPOS; else destination[X_AXIS] = FILAMENTCHANGE_XPOS;
#endif #endif
if (code_seen('Y')) destination[Y_AXIS] = code_value(); if (code_seen('Y')) destination[Y_AXIS] = code_value();
#if ENABLED(FILAMENTCHANGE_YPOS) #if EXIST(FILAMENTCHANGE_YPOS)
else destination[Y_AXIS] = FILAMENTCHANGE_YPOS; else destination[Y_AXIS] = FILAMENTCHANGE_YPOS;
#endif #endif
RUNPLAN RUNPLAN
if (code_seen('L')) destination[E_AXIS] += code_value(); if (code_seen('L')) destination[E_AXIS] += code_value();
#if ENABLED(FILAMENTCHANGE_FINALRETRACT) #if EXIST(FILAMENTCHANGE_FINALRETRACT)
else destination[E_AXIS] += FILAMENTCHANGE_FINALRETRACT; else destination[E_AXIS] += FILAMENTCHANGE_FINALRETRACT;
#endif #endif
...@@ -6341,13 +6341,13 @@ inline void gcode_M907() { ...@@ -6341,13 +6341,13 @@ inline void gcode_M907() {
if (code_seen('B')) digipot_current(4, code_value()); if (code_seen('B')) digipot_current(4, code_value());
if (code_seen('S')) for (int i=0; i<=4; i++) digipot_current(i, code_value()); if (code_seen('S')) for (int i=0; i<=4; i++) digipot_current(i, code_value());
#endif #endif
#if ENABLED(MOTOR_CURRENT_PWM_XY_PIN) #if EXIST(MOTOR_CURRENT_PWM_XY_PIN)
if (code_seen('X')) digipot_current(0, code_value()); if (code_seen('X')) digipot_current(0, code_value());
#endif #endif
#if ENABLED(MOTOR_CURRENT_PWM_Z_PIN) #if EXIST(MOTOR_CURRENT_PWM_Z_PIN)
if (code_seen('Z')) digipot_current(1, code_value()); if (code_seen('Z')) digipot_current(1, code_value());
#endif #endif
#if ENABLED(MOTOR_CURRENT_PWM_E_PIN) #if EXIST(MOTOR_CURRENT_PWM_E_PIN)
if (code_seen('E')) digipot_current(2, code_value()); if (code_seen('E')) digipot_current(2, code_value());
#endif #endif
#if ENABLED(DIGIPOT_I2C) #if ENABLED(DIGIPOT_I2C)
......
MarlinKimbra/conditionals.h
View file @ 701efac2
...@@ -108,11 +108,11 @@ ...@@ -108,11 +108,11 @@
#define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
#define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD
#if DISABLED(ENCODER_PULSES_PER_STEP) #if NOTEXIST(ENCODER_PULSES_PER_STEP)
#define ENCODER_PULSES_PER_STEP 4 #define ENCODER_PULSES_PER_STEP 4
#endif #endif
#if DISABLED(ENCODER_STEPS_PER_MENU_ITEM) #if NOTEXIST(ENCODER_STEPS_PER_MENU_ITEM)
#define ENCODER_STEPS_PER_MENU_ITEM 1 #define ENCODER_STEPS_PER_MENU_ITEM 1
#endif #endif
...@@ -204,7 +204,7 @@ ...@@ -204,7 +204,7 @@
/** /**
* Default LCD contrast for dogm-like LCD displays * Default LCD contrast for dogm-like LCD displays
*/ */
#if ENABLED(DOGLCD) && DISABLED(DEFAULT_LCD_CONTRAST) #if ENABLED(DOGLCD) && NOTEXIST(DEFAULT_LCD_CONTRAST)
#define DEFAULT_LCD_CONTRAST 32 #define DEFAULT_LCD_CONTRAST 32
#endif #endif
...@@ -369,7 +369,7 @@ ...@@ -369,7 +369,7 @@
/** /**
* Servo Leveling * Servo Leveling
*/ */
#define SERVO_LEVELING (ENABLED(SERVO_ENDSTOPS) && ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE)) //#define SERVO_LEVELING (ENABLED(SERVO_ENDSTOPS) && ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE))
/** /**
* Sled Options * Sled Options
...@@ -427,7 +427,7 @@ ...@@ -427,7 +427,7 @@
* Power Signal Control Definitions * Power Signal Control Definitions
* By default use Normal definition * By default use Normal definition
*/ */
#if DISABLED(POWER_SUPPLY) #if NOTEXIST(POWER_SUPPLY)
#define POWER_SUPPLY 0 #define POWER_SUPPLY 0
#endif #endif
#if (POWER_SUPPLY == 1) // 1 = ATX #if (POWER_SUPPLY == 1) // 1 = ATX
...@@ -556,7 +556,7 @@ ...@@ -556,7 +556,7 @@
#define HAS_AUTO_FAN (HAS_AUTO_FAN_0 || HAS_AUTO_FAN_1 || HAS_AUTO_FAN_2 || HAS_AUTO_FAN_3) #define HAS_AUTO_FAN (HAS_AUTO_FAN_0 || HAS_AUTO_FAN_1 || HAS_AUTO_FAN_2 || HAS_AUTO_FAN_3)
#define HAS_FAN (PIN_EXISTS(FAN)) #define HAS_FAN (PIN_EXISTS(FAN))
#define HAS_CONTROLLERFAN (ENABLED(CONTROLLERFAN) && PIN_EXISTS(CONTROLLERFAN)) #define HAS_CONTROLLERFAN (ENABLED(CONTROLLERFAN) && PIN_EXISTS(CONTROLLERFAN))
#define HAS_SERVOS (ENABLED(NUM_SERVOS) && NUM_SERVOS > 0) #define HAS_SERVOS (ENABLED(ENABLE_SERVOS) && NUM_SERVOS > 0)
#define HAS_SERVO_0 (PIN_EXISTS(SERVO0)) #define HAS_SERVO_0 (PIN_EXISTS(SERVO0))
#define HAS_SERVO_1 (PIN_EXISTS(SERVO1)) #define HAS_SERVO_1 (PIN_EXISTS(SERVO1))
#define HAS_SERVO_2 (PIN_EXISTS(SERVO2)) #define HAS_SERVO_2 (PIN_EXISTS(SERVO2))
......
MarlinKimbra/configuration_basic.h
View file @ 701efac2
...@@ -2,7 +2,7 @@ ...@@ -2,7 +2,7 @@
#define CONFIGURATION_H #define CONFIGURATION_H
#include "macros.h" #include "macros.h"
#include "Default_Version.h" #include "default_version.h"
/* /*
* This configuration file contains basic settings. * This configuration file contains basic settings.
...@@ -250,13 +250,14 @@ ...@@ -250,13 +250,14 @@
#include "Configuration_Delta.h" #include "Configuration_Delta.h"
#elif MECH(SCARA) #elif MECH(SCARA)
#include "Configuration_Scara.h" #include "Configuration_Scara.h"
#endif #endif
#include "Configuration_Feature.h" #include "Configuration_Feature.h"
#include "Configuration_Overall.h" #include "Configuration_Overall.h"
#include "thermistortables.h"
#include "conditionals.h" #include "conditionals.h"
#include "thermistortables.h"
#include "language.h"
#include "pins.h" #include "pins.h"
#include "dependencies.h" #include "dependencies.h"
#include "conflicts.h" #include "conflicts.h"
......
MarlinKimbra/configuration_feature.h
View file @ 701efac2
...@@ -412,7 +412,7 @@ ...@@ -412,7 +412,7 @@
* when the target temperature is less than IDLE_OOZING_MINTEMP and * * when the target temperature is less than IDLE_OOZING_MINTEMP and *
* the actual temperature is greater than IDLE_OOZING_MINTEMP. * * the actual temperature is greater than IDLE_OOZING_MINTEMP. *
* * * *
* PS: Always remember to set your extruder target temperature to 0°C * * PS: Always remember to set your extruder target temperature to 0°C *
* before shoudown the printer if you enable this feature. * * before shoudown the printer if you enable this feature. *
* * * *
* Uncomment IDLE_OOZING_PREVENT to enable this feature * * Uncomment IDLE_OOZING_PREVENT to enable this feature *
...@@ -648,6 +648,7 @@ ...@@ -648,6 +648,7 @@
/*********************************************************************** /***********************************************************************
**************************** R/C Servo ******************************** **************************** R/C Servo ********************************
**********************************************************************/ **********************************************************************/
//#define ENABLE_SERVOS
// Number of servos // Number of servos
// If you select a configuration below, this will receive a default value and does not need to be set manually // If you select a configuration below, this will receive a default value and does not need to be set manually
// set it manually if you have more servos than extruders and wish to manually control some // set it manually if you have more servos than extruders and wish to manually control some
...@@ -1131,7 +1132,6 @@ ...@@ -1131,7 +1132,6 @@
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click //#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
// 0 to disable buzzer feedback. Test with M300 S<frequency Hz> P<duration ms> // 0 to disable buzzer feedback. Test with M300 S<frequency Hz> P<duration ms>
#define LCD_MAX_TEMP_OFFSET -15
//Display Voltage Logic Selector on Alligator Board //Display Voltage Logic Selector on Alligator Board
//#define UI_VOLTAGE_LEVEL 0 // 3.3 V //#define UI_VOLTAGE_LEVEL 0 // 3.3 V
......
MarlinKimbra/configuration_store.cpp
View file @ 701efac2
...@@ -158,7 +158,7 @@ void Config_StoreSettings() { ...@@ -158,7 +158,7 @@ void Config_StoreSettings() {
EEPROM_WRITE_VAR(i, max_e_jerk); EEPROM_WRITE_VAR(i, max_e_jerk);
EEPROM_WRITE_VAR(i, home_offset); EEPROM_WRITE_VAR(i, home_offset);
#if DISABLED(DELTA) #if !MECH(DELTA)
EEPROM_WRITE_VAR(i, zprobe_zoffset); EEPROM_WRITE_VAR(i, zprobe_zoffset);
#endif #endif
...@@ -295,7 +295,7 @@ void Config_RetrieveSettings() { ...@@ -295,7 +295,7 @@ void Config_RetrieveSettings() {
EEPROM_READ_VAR(i, max_e_jerk); EEPROM_READ_VAR(i, max_e_jerk);
EEPROM_READ_VAR(i, home_offset); EEPROM_READ_VAR(i, home_offset);
#if DISABLED(DELTA) #if !MECH(DELTA)
EEPROM_READ_VAR(i, zprobe_zoffset); EEPROM_READ_VAR(i, zprobe_zoffset);
#endif #endif
......
MarlinKimbra/conficts.h → MarlinKimbra/conflicts.h
View file @ 701efac2
...@@ -88,7 +88,7 @@ ...@@ -88,7 +88,7 @@
#if NUM_SERVOS > 4 #if NUM_SERVOS > 4
#error CONFLICT ERROR: The maximum number of SERVOS in Marlin is 4. #error CONFLICT ERROR: The maximum number of SERVOS in Marlin is 4.
#endif #endif
#if ENABLED(NUM_SERVOS) && NUM_SERVOS > 0 #if NUM_SERVOS > 0
#if X_ENDSTOP_SERVO_NR >= 0 || Y_ENDSTOP_SERVO_NR >= 0 || Z_ENDSTOP_SERVO_NR >= 0 #if X_ENDSTOP_SERVO_NR >= 0 || Y_ENDSTOP_SERVO_NR >= 0 || Z_ENDSTOP_SERVO_NR >= 0
#if X_ENDSTOP_SERVO_NR >= NUM_SERVOS #if X_ENDSTOP_SERVO_NR >= NUM_SERVOS
#error CONFLICT ERROR: X_ENDSTOP_SERVO_NR must be smaller than NUM_SERVOS. #error CONFLICT ERROR: X_ENDSTOP_SERVO_NR must be smaller than NUM_SERVOS.
...@@ -136,26 +136,26 @@ ...@@ -136,26 +136,26 @@
* Require a Z Probe Pin if Z_PROBE_ENDSTOP is enabled. * Require a Z Probe Pin if Z_PROBE_ENDSTOP is enabled.
*/ */
#if ENABLED(Z_PROBE_ENDSTOP) #if ENABLED(Z_PROBE_ENDSTOP)
#if DISABLED(Z_PROBE_PIN) #if NOTEXIST(Z_PROBE_PIN)
#error CONFLICT ERROR: You must have a Z_PROBE_PIN defined in pins2tool.h file if you enable Z_PROBE_ENDSTOP. #error CONFLICT ERROR: You must have a Z_PROBE_PIN defined in pins2tool.h file if you enable Z_PROBE_ENDSTOP.
#erro sistema pins2tool.h #erro sistema pins2tool.h
#endif #endif
#if Z_PROBE_PIN == -1 #if Z_PROBE_PIN == -1
#error CONFLICT ERROR: You must set Z_PROBE_PIN to a valid pin if you enable Z_PROBE_ENDSTOP. #error CONFLICT ERROR: You must set Z_PROBE_PIN to a valid pin if you enable Z_PROBE_ENDSTOP.
#endif #endif
// Forcing Servo definitions can break some hall effect sensor setups. Leaving these here for further comment.
// #if DISABLED(NUM_SERVOS) #if DISABLED(ENABLE_SERVOS)
// #error CONFLICT ERROR: You must have NUM_SERVOS defined and there must be at least 1 configured to use Z_PROBE_ENDSTOP. #error CONFLICT ERROR: You must enable ENABLE_SERVOS and must have NUM_SERVOS defined and there must be at least 1 configured to use Z_PROBE_ENDSTOP.
// #endif #endif
// #if ENABLED(NUM_SERVOS) && NUM_SERVOS < 1 #if NUM_SERVOS < 1
// #error CONFLICT ERROR: You must have at least 1 servo defined for NUM_SERVOS to use Z_PROBE_ENDSTOP. #error CONFLICT ERROR: You must have at least 1 servo defined for NUM_SERVOS to use Z_PROBE_ENDSTOP.
// #endif #endif
// #if Z_ENDSTOP_SERVO_NR < 0 #if Z_ENDSTOP_SERVO_NR < 0
// #error CONFLICT ERROR: You must have Z_ENDSTOP_SERVO_NR set to at least 0 or above to use Z_PROBE_ENDSTOP. #error CONFLICT ERROR: You must have Z_ENDSTOP_SERVO_NR set to at least 0 or above to use Z_PROBE_ENDSTOP.
// #endif #endif
// #if DISABLED(ERVO_ENDSTOP_ANGLES) #if NOTEXIST(SERVO_ENDSTOP_ANGLES)
// #error CONFLICT ERROR: You must have SERVO_ENDSTOP_ANGLES defined for Z Extend and Retract to use Z_PROBE_ENDSTOP. #error CONFLICT ERROR: You must have SERVO_ENDSTOP_ANGLES defined for Z Extend and Retract to use Z_PROBE_ENDSTOP.
// #endif #endif
#endif #endif
/** /**
* Check if Probe_Offset * Grid Points is greater than Probing Range * Check if Probe_Offset * Grid Points is greater than Probing Range
...@@ -210,7 +210,7 @@ ...@@ -210,7 +210,7 @@
* Delta & Z_PROBE_ENDSTOP * Delta & Z_PROBE_ENDSTOP
*/ */
#if MECH(DELTA) && ENABLED(Z_PROBE_ENDSTOP) #if MECH(DELTA) && ENABLED(Z_PROBE_ENDSTOP)
#if DISABLED(Z_PROBE_PIN) #if NOTEXIST(Z_PROBE_PIN)
#error CONFLICT ERROR: You must have a Z_PROBE_PIN defined in your pins2tool.h file if you enable Z_PROBE_ENDSTOP #error CONFLICT ERROR: You must have a Z_PROBE_PIN defined in your pins2tool.h file if you enable Z_PROBE_ENDSTOP
#endif #endif
#if Z_PROBE_PIN == -1 #if Z_PROBE_PIN == -1
...@@ -224,7 +224,7 @@ ...@@ -224,7 +224,7 @@
#if ENABLED(DUAL_X_CARRIAGE) #if ENABLED(DUAL_X_CARRIAGE)
#if EXTRUDERS == 1 || MECH(COREXY) \ #if EXTRUDERS == 1 || MECH(COREXY) \
|| HASNT(X2_ENABLE) || HASNT(X2_STEP) || HASNT(X2_DIR) \ || HASNT(X2_ENABLE) || HASNT(X2_STEP) || HASNT(X2_DIR) \
|| DISABLED(X2_HOME_POS) || DISABLED(X2_MIN_POS) || DISABLED(X2_MAX_POS) \ || NOTEXIST(X2_HOME_POS) || NOTEXIST(X2_MIN_POS) || NOTEXIST(X2_MAX_POS) \
|| HASNT(X_MAX) || HASNT(X_MAX)
#error CONFLICT ERROR: Missing or invalid definitions for DUAL_X_CARRIAGE mode. #error CONFLICT ERROR: Missing or invalid definitions for DUAL_X_CARRIAGE mode.
#endif #endif
......
MarlinKimbra/dependencies.h
View file @ 701efac2
This diff is collapsed.
MarlinKimbra/firmware_test.h
View file @ 701efac2
...@@ -28,7 +28,7 @@ void FirmwareTest() ...@@ -28,7 +28,7 @@ void FirmwareTest()
ECHO_EM(" "); ECHO_EM(" ");
ECHO_EM("***** ENDSTOP X *****"); ECHO_EM("***** ENDSTOP X *****");
#if ENABLED(X_MIN_PIN) && X_MIN_PIN > -1 && X_HOME_DIR == -1 #if EXIST(X_MIN_PIN) && X_MIN_PIN > -1 && X_HOME_DIR == -1
if (!READ(X_MIN_PIN)^X_MIN_ENDSTOP_INVERTING) { if (!READ(X_MIN_PIN)^X_MIN_ENDSTOP_INVERTING) {
ECHO_M("MIN ENDSTOP X: "); ECHO_M("MIN ENDSTOP X: ");
ECHO_EV(MSG_ENDSTOP_OPEN); ECHO_EV(MSG_ENDSTOP_OPEN);
...@@ -70,7 +70,7 @@ void FirmwareTest() ...@@ -70,7 +70,7 @@ void FirmwareTest()
ECHO_EV(MSG_FWTEST_ENDSTOP_ERR); ECHO_EV(MSG_FWTEST_ENDSTOP_ERR);
return; return;
} }
#elif ENABLED(X_MAX_PIN) && X_MAX_PIN > -1 && X_HOME_DIR == 1 #elif EXIST(X_MAX_PIN) && X_MAX_PIN > -1 && X_HOME_DIR == 1
if (!READ(X_MAX_PIN)^X_MAX_ENDSTOP_INVERTING) { if (!READ(X_MAX_PIN)^X_MAX_ENDSTOP_INVERTING) {
ECHO_M("MAX ENDSTOP X: "); ECHO_M("MAX ENDSTOP X: ");
ECHO_EV(MSG_ENDSTOP_OPEN); ECHO_EV(MSG_ENDSTOP_OPEN);
...@@ -126,7 +126,7 @@ void FirmwareTest() ...@@ -126,7 +126,7 @@ void FirmwareTest()
ECHO_EM(" "); ECHO_EM(" ");
ECHO_EM("***** ENDSTOP Y *****"); ECHO_EM("***** ENDSTOP Y *****");
#if ENABLED(Y_MIN_PIN) && Y_MIN_PIN > -1 && Y_HOME_DIR == -1 #if EXIST(Y_MIN_PIN) && Y_MIN_PIN > -1 && Y_HOME_DIR == -1
if (!READ(Y_MIN_PIN)^Y_MIN_ENDSTOP_INVERTING){ if (!READ(Y_MIN_PIN)^Y_MIN_ENDSTOP_INVERTING){
ECHO_M("MIN ENDSTOP Y: "); ECHO_M("MIN ENDSTOP Y: ");
ECHO_EV(MSG_ENDSTOP_OPEN); ECHO_EV(MSG_ENDSTOP_OPEN);
...@@ -168,7 +168,7 @@ void FirmwareTest() ...@@ -168,7 +168,7 @@ void FirmwareTest()
ECHO_EV(MSG_FWTEST_ENDSTOP_ERR); ECHO_EV(MSG_FWTEST_ENDSTOP_ERR);
return; return;
} }
#elif ENABLED(Y_MAX_PIN) && Y_MAX_PIN > -1 && Y_HOME_DIR == 1 #elif EXIST(Y_MAX_PIN) && Y_MAX_PIN > -1 && Y_HOME_DIR == 1
if (!READ(Y_MAX_PIN)^Y_MAX_ENDSTOP_INVERTING){ if (!READ(Y_MAX_PIN)^Y_MAX_ENDSTOP_INVERTING){
ECHO_M("MAX ENDSTOP Y: "); ECHO_M("MAX ENDSTOP Y: ");
ECHO_EV(MSG_ENDSTOP_OPEN); ECHO_EV(MSG_ENDSTOP_OPEN);
...@@ -224,7 +224,7 @@ void FirmwareTest() ...@@ -224,7 +224,7 @@ void FirmwareTest()
ECHO_EM(" "); ECHO_EM(" ");
ECHO_EM("***** ENDSTOP Z *****"); ECHO_EM("***** ENDSTOP Z *****");
#if ENABLED(Z_MIN_PIN) && Z_MIN_PIN > -1 && Z_HOME_DIR == -1 #if EXIST(Z_MIN_PIN) && Z_MIN_PIN > -1 && Z_HOME_DIR == -1
if (!READ(Z_MIN_PIN)^Z_MIN_ENDSTOP_INVERTING){ if (!READ(Z_MIN_PIN)^Z_MIN_ENDSTOP_INVERTING){
ECHO_M("MIN ENDSTOP Z: "); ECHO_M("MIN ENDSTOP Z: ");
ECHO_EV(MSG_ENDSTOP_OPEN); ECHO_EV(MSG_ENDSTOP_OPEN);
...@@ -266,7 +266,7 @@ void FirmwareTest() ...@@ -266,7 +266,7 @@ void FirmwareTest()
ECHO_EV(MSG_FWTEST_ENDSTOP_ERR); ECHO_EV(MSG_FWTEST_ENDSTOP_ERR);
return; return;
} }
#elif ENABLED(Z_MAX_PIN) && Z_MAX_PIN > -1 && Z_HOME_DIR == 1 #elif EXIST(Z_MAX_PIN) && Z_MAX_PIN > -1 && Z_HOME_DIR == 1
if (!READ(Z_MAX_PIN)^Z_MAX_ENDSTOP_INVERTING){ if (!READ(Z_MAX_PIN)^Z_MAX_ENDSTOP_INVERTING){
ECHO_M("MAX ENDSTOP Z: "); ECHO_M("MAX ENDSTOP Z: ");
ECHO_EV(MSG_ENDSTOP_OPEN); ECHO_EV(MSG_ENDSTOP_OPEN);
......
MarlinKimbra/language.h
View file @ 701efac2
#ifndef LANGUAGE_H #ifndef LANGUAGE_H
#define LANGUAGE_H #define LANGUAGE_H
#include "Configuration_Basic.h"
// NOTE: IF YOU CHANGE LANGUAGE FILES OR MERGE A FILE WITH CHANGES // NOTE: IF YOU CHANGE LANGUAGE FILES OR MERGE A FILE WITH CHANGES
// //
// ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration_Basic.h" // ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration_Basic.h"
...@@ -25,11 +23,11 @@ ...@@ -25,11 +23,11 @@
// 13 Basque-Euskera // 13 Basque-Euskera
// 14 Portuguese (Brazil) // 14 Portuguese (Brazil)
#if DISABLED(LANGUAGE_CHOICE) #if NOTEXIST(LANGUAGE_CHOICE)
#define LANGUAGE_CHOICE 7 // Pick your language from the list above #define LANGUAGE_CHOICE 7 // Pick your language from the list above
#endif #endif
#include "Default_Version.h" #include "default_version.h"
#define PROTOCOL_VERSION "1.0" #define PROTOCOL_VERSION "1.0"
...@@ -49,20 +47,20 @@ ...@@ -49,20 +47,20 @@
#elif MB(SAV_MKI) #elif MB(SAV_MKI)
#define MACHINE_NAME "SAV MkI" #define MACHINE_NAME "SAV MkI"
#define SOURCE_CODE_URL "https://github.com/fmalpartida/Marlin/tree/SAV-MkI-config" #define SOURCE_CODE_URL "https://github.com/fmalpartida/Marlin/tree/SAV-MkI-config"
#elif DISABLED(MACHINE_NAME) #elif NOTEXIST(MACHINE_NAME)
#define MACHINE_NAME "3D Printer" #define MACHINE_NAME "3D Printer"
#endif #endif
#if ENABLED(CUSTOM_MACHINE_NAME) #if EXIST(CUSTOM_MACHINE_NAME)
#undef MACHINE_NAME #undef MACHINE_NAME
#define MACHINE_NAME CUSTOM_MACHINE_NAME #define MACHINE_NAME CUSTOM_MACHINE_NAME
#endif #endif
#if DISABLED(SOURCE_CODE_URL) #if NOTEXIST(SOURCE_CODE_URL)
#define SOURCE_CODE_URL "https://github.com/MagoKimbra/MarlinKimbra" #define SOURCE_CODE_URL "https://github.com/MagoKimbra/MarlinKimbra"
#endif #endif
#if DISABLED(BUILD_VERSION) #if NOTEXIST(BUILD_VERSION)
#define BUILD_VERSION "V4; MarlinKimbra for 4 extruder" #define BUILD_VERSION "V4; MarlinKimbra for 4 extruder"
#endif #endif
......
MarlinKimbra/macros.h
View file @ 701efac2
...@@ -24,6 +24,8 @@ ...@@ -24,6 +24,8 @@
#define SWITCH_ENABLED_ 1 #define SWITCH_ENABLED_ 1
#define ENABLED(b) _CAT(SWITCH_ENABLED_, b) #define ENABLED(b) _CAT(SWITCH_ENABLED_, b)
#define DISABLED(b) (!_CAT(SWITCH_ENABLED_, b)) #define DISABLED(b) (!_CAT(SWITCH_ENABLED_, b))
#define EXIST(b) defined(EXIST)
#define NOTEXIST(b) (!defined(EXIST))
#define COUNT(a) (sizeof(a)/sizeof(*a)) #define COUNT(a) (sizeof(a)/sizeof(*a))
......
MarlinKimbra/pins.h
View file @ 701efac2
...@@ -73,8 +73,6 @@ ...@@ -73,8 +73,6 @@
#ifndef PINS_H #ifndef PINS_H
#define PINS_H #define PINS_H
#include "boards.h"
// Preset optional pins // Preset optional pins
#define X_MS1_PIN -1 #define X_MS1_PIN -1
#define X_MS2_PIN -1 #define X_MS2_PIN -1
...@@ -188,7 +186,7 @@ ...@@ -188,7 +186,7 @@
#error Oops! Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu. #error Oops! Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu.
#endif #endif
#if DISABLED(GEN7_VERSION) #if NOTEXIST(GEN7_VERSION)
#define GEN7_VERSION 12 // v1.x #define GEN7_VERSION 12 // v1.x
#endif #endif
...@@ -263,7 +261,7 @@ ...@@ -263,7 +261,7 @@
#error Oops! Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu. #error Oops! Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu.
#endif #endif
#if DISABLED(GEN7_VERSION) #if NOTEXIST(GEN7_VERSION)
#define GEN7_VERSION 13 // v1.x #define GEN7_VERSION 13 // v1.x
#endif #endif
...@@ -504,7 +502,7 @@ ...@@ -504,7 +502,7 @@
#error Oops! Make sure you have 'Sethi 3D' selected from the 'Tools -> Boards' menu. #error Oops! Make sure you have 'Sethi 3D' selected from the 'Tools -> Boards' menu.
#endif #endif
#if DISABLED(GEN7_VERSION) #if NOTEXIST(GEN7_VERSION)
#define GEN7_VERSION 12 // v1.x #define GEN7_VERSION 12 // v1.x
#endif #endif
...@@ -1126,13 +1124,13 @@ ...@@ -1126,13 +1124,13 @@
#define ORIG_TEMP_BED_PIN 14 // ANALOG NUMBERING #define ORIG_TEMP_BED_PIN 14 // ANALOG NUMBERING
#if NUM_SERVOS > 0 #if NUM_SERVOS > 0
#define SERVO0_PIN 11 #define SERVO0_PIN 11
#if NUM_SERVOS > 1 #if NUM_SERVOS > 1
#define SERVO1_PIN 6 #define SERVO1_PIN 6
#if NUM_SERVOS > 2 #if NUM_SERVOS > 2
#define SERVO2_PIN 5 #define SERVO2_PIN 5
#if NUM_SERVOS > 3 #if NUM_SERVOS > 3
#define SERVO3_PIN 4 #define SERVO3_PIN 4
#endif #endif
#endif #endif
#endif #endif
...@@ -1329,13 +1327,13 @@ ...@@ -1329,13 +1327,13 @@
#define ORIG_TEMP_BED_PIN 14 // ANALOG NUMBERING #define ORIG_TEMP_BED_PIN 14 // ANALOG NUMBERING
#if NUM_SERVOS > 0 #if NUM_SERVOS > 0
#define SERVO0_PIN 11 #define SERVO0_PIN 11
#if NUM_SERVOS > 1 #if NUM_SERVOS > 1
#define SERVO1_PIN 6 #define SERVO1_PIN 6
#if NUM_SERVOS > 2 #if NUM_SERVOS > 2
#define SERVO2_PIN 5 #define SERVO2_PIN 5
#if NUM_SERVOS > 3 #if NUM_SERVOS > 3
#define SERVO3_PIN 4 #define SERVO3_PIN 4
#endif #endif
#endif #endif
#endif #endif
...@@ -1532,13 +1530,13 @@ ...@@ -1532,13 +1530,13 @@
#define ORIG_TEMP_BED_PIN 14 // ANALOG NUMBERING #define ORIG_TEMP_BED_PIN 14 // ANALOG NUMBERING
#if NUM_SERVOS > 0 #if NUM_SERVOS > 0
#define SERVO0_PIN 11 #define SERVO0_PIN 11
#if NUM_SERVOS > 1 #if NUM_SERVOS > 1
#define SERVO1_PIN 6 #define SERVO1_PIN 6
#if NUM_SERVOS > 2 #if NUM_SERVOS > 2
#define SERVO2_PIN 5 #define SERVO2_PIN 5
#if NUM_SERVOS > 3 #if NUM_SERVOS > 3
#define SERVO3_PIN 4 #define SERVO3_PIN 4
#endif #endif
#endif #endif
#endif #endif
...@@ -1735,13 +1733,13 @@ ...@@ -1735,13 +1733,13 @@
#define ORIG_TEMP_BED_PIN -1 // ANALOG NUMBERING #define ORIG_TEMP_BED_PIN -1 // ANALOG NUMBERING
#if NUM_SERVOS > 0 #if NUM_SERVOS > 0
#define SERVO0_PIN 11 #define SERVO0_PIN 11
#if NUM_SERVOS > 1 #if NUM_SERVOS > 1
#define SERVO1_PIN 6 #define SERVO1_PIN 6
#if NUM_SERVOS > 2 #if NUM_SERVOS > 2
#define SERVO2_PIN 5 #define SERVO2_PIN 5
#if NUM_SERVOS > 3 #if NUM_SERVOS > 3
#define SERVO3_PIN 4 #define SERVO3_PIN 4
#endif #endif
#endif #endif
#endif #endif
...@@ -2122,19 +2120,16 @@ ...@@ -2122,19 +2120,16 @@
#if ENABLED(NUM_SERVOS) #if NUM_SERVOS > 0
#define SERVO0_PIN 5 #define SERVO0_PIN 5
#if NUM_SERVOS > 1 #if NUM_SERVOS > 1
#define SERVO1_PIN 6 #define SERVO1_PIN 6
#endif #if NUM_SERVOS > 2
#define SERVO2_PIN 39
#if NUM_SERVOS > 2 #if NUM_SERVOS > 3
#define SERVO2_PIN 39 #define SERVO3_PIN 40
#endif #endif
#endif
#if NUM_SERVOS > 3
#define SERVO3_PIN 40
#endif #endif
#endif #endif
...@@ -2260,23 +2255,18 @@ ...@@ -2260,23 +2255,18 @@
#define ORIG_TEMP_2_PIN 4 // 3 // ANALOG NUMBERING #define ORIG_TEMP_2_PIN 4 // 3 // ANALOG NUMBERING
#define ORIG_TEMP_3_PIN -1 // ANALOG NUMBERING #define ORIG_TEMP_3_PIN -1 // ANALOG NUMBERING
#define TEMP_4_PIN -1 // ANALOG NUMBERING #define TEMP_4_PIN -1 // ANALOG NUMBERING
#if ENABLED(NUM_SERVOS)
#define SERVO0_PIN 11
#if NUM_SERVOS > 0
#define SERVO0_PIN 11
#if NUM_SERVOS > 1 #if NUM_SERVOS > 1
#define SERVO1_PIN 6 #define SERVO1_PIN 6
#endif #if NUM_SERVOS > 2
#define SERVO2_PIN 5
#if NUM_SERVOS > 2 #if NUM_SERVOS > 3
#define SERVO2_PIN 5 #define SERVO3_PIN 4
#endif #endif
#endif
#if NUM_SERVOS > 3
#define SERVO3_PIN 4
#endif #endif
#endif #endif
...@@ -2572,26 +2562,23 @@ ...@@ -2572,26 +2562,23 @@
#if UI_VOLTAGE_LEVEL != 1 #if UI_VOLTAGE_LEVEL != 1
#undef UI_VOLTAGE_LEVEL #undef UI_VOLTAGE_LEVEL
#define UI_VOLTAGE_LEVEL 1 #define UI_VOLTAGE_LEVEL 1
#endif #endif
#endif //REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER #endif //REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
#if ENABLED(NUM_SERVOS) #if NUM_SERVOS > 0
#define SERVO0_PIN 36 #define SERVO0_PIN 36
#if NUM_SERVOS > 1
#if NUM_SERVOS > 1 #define SERVO1_PIN 40
#define SERVO1_PIN 40
#endif
#if NUM_SERVOS > 2 #if NUM_SERVOS > 2
#define SERVO2_PIN 41 #define SERVO2_PIN 41
#endif #if NUM_SERVOS > 3
#define SERVO3_PIN -1
#if NUM_SERVOS > 3 #endif
#define SERVO3_PIN -1
#endif #endif
#endif #endif
#endif
#endif //ALLIGATOR #endif //ALLIGATOR
/****************************************************************************************/ /****************************************************************************************/
...@@ -2669,19 +2656,16 @@ ...@@ -2669,19 +2656,16 @@
#endif #endif
#if NUM_SERVOS > 0 #if NUM_SERVOS > 0
#define SERVO0_PIN -1 #define SERVO0_PIN -1
#endif #if NUM_SERVOS > 1
#define SERVO1_PIN -1
#if NUM_SERVOS > 1 #if NUM_SERVOS > 2
#define SERVO1_PIN -1 #define SERVO2_PIN -1
#endif #if NUM_SERVOS > 3
#define SERVO3_PIN -1
#if NUM_SERVOS > 2 #endif
#define SERVO2_PIN -1 #endif
#endif #endif
#if NUM_SERVOS > 3
#define SERVO3_PIN -1
#endif #endif
#define PS_ON_PIN -1 #define PS_ON_PIN -1
...@@ -2864,21 +2848,22 @@ ...@@ -2864,21 +2848,22 @@
#define ORIG_TEMP_BED_PIN 14 // ANALOG NUMBERING #define ORIG_TEMP_BED_PIN 14 // ANALOG NUMBERING
#if NUM_SERVOS > 0 #if NUM_SERVOS > 0
#define SERVO0_PIN 11 #define SERVO0_PIN 11
#endif
#if NUM_SERVOS > 1
#define SERVO1_PIN 6
#endif #endif
#if NUM_SERVOS > 2 #if NUM_SERVOS > 0
#define SERVO2_PIN 5 #define SERVO0_PIN 11
#if NUM_SERVOS > 1
#define SERVO1_PIN 6
#if NUM_SERVOS > 2
#define SERVO2_PIN 5
#if NUM_SERVOS > 3
#define SERVO3_PIN 4
#endif
#endif
#endif
#endif #endif
#if NUM_SERVOS > 3
#define SERVO3_PIN 4
#endif
#if ENABLED(TEMP_STAT_LEDS) #if ENABLED(TEMP_STAT_LEDS)
#define STAT_LED_RED 6 #define STAT_LED_RED 6
#define STAT_LED_BLUE 11 #define STAT_LED_BLUE 11
...@@ -3069,17 +3054,17 @@ ...@@ -3069,17 +3054,17 @@
#define ORIG_TEMP_BED_PIN 14 // ANALOG NUMBERING #define ORIG_TEMP_BED_PIN 14 // ANALOG NUMBERING
#if ENABLED(NUM_SERVOS) #if NUM_SERVOS > 0
#define SERVO0_PIN 47 #define SERVO0_PIN 47
#if NUM_SERVOS > 1 #if NUM_SERVOS > 1
#define SERVO1_PIN -1 #define SERVO1_PIN -1
#if NUM_SERVOS > 2 #if NUM_SERVOS > 2
#define SERVO2_PIN -1 #define SERVO2_PIN -1
#if NUM_SERVOS > 3 #if NUM_SERVOS > 3
#define SERVO3_PIN -1 #define SERVO3_PIN -1
#endif #endif
#endif #endif
#endif #endif
#endif #endif
#if ENABLED(TEMP_STAT_LEDS) #if ENABLED(TEMP_STAT_LEDS)
...@@ -3665,13 +3650,13 @@ ...@@ -3665,13 +3650,13 @@
#define LED_PIN 13 #define LED_PIN 13
#if NUM_SERVOS > 0 #if NUM_SERVOS > 0
#define SERVO0_PIN 46 //AUX3-6 #define SERVO0_PIN 46 //AUX3-6
#if NUM_SERVOS > 1 #if NUM_SERVOS > 1
#define SERVO1_PIN 47 //AUX3-5 #define SERVO1_PIN 47 //AUX3-5
#if NUM_SERVOS > 2 #if NUM_SERVOS > 2
#define SERVO2_PIN 48 //AUX3-4 #define SERVO2_PIN 48 //AUX3-4
#if NUM_SERVOS > 3 #if NUM_SERVOS > 3
#define SERVO2_PIN 49 //AUX3-3 #define SERVO2_PIN 49 //AUX3-3
#endif #endif
#endif #endif
#endif #endif
...@@ -3983,18 +3968,15 @@ ...@@ -3983,18 +3968,15 @@
#if NUM_SERVOS > 0 #if NUM_SERVOS > 0
#define SERVO0_PIN 11 #define SERVO0_PIN 11
#endif #if NUM_SERVOS > 1
#define SERVO1_PIN 6
#if NUM_SERVOS > 1 #if NUM_SERVOS > 2
#define SERVO1_PIN 6 #define SERVO2_PIN 5
#endif #if NUM_SERVOS > 3
#define SERVO3_PIN 4
#if NUM_SERVOS > 2 #endif
#define SERVO2_PIN 5 #endif
#endif #endif
#if NUM_SERVOS > 3
#define SERVO3_PIN 4
#endif #endif
#define BEEPER_PIN 33 #define BEEPER_PIN 33
...@@ -4109,18 +4091,15 @@ ...@@ -4109,18 +4091,15 @@
#if NUM_SERVOS > 0 #if NUM_SERVOS > 0
#define SERVO0_PIN 11 #define SERVO0_PIN 11
#endif #if NUM_SERVOS > 1
#define SERVO1_PIN 6
#if NUM_SERVOS > 1 #if NUM_SERVOS > 2
#define SERVO1_PIN 6 #define SERVO2_PIN 5
#endif #if NUM_SERVOS > 3
#define SERVO3_PIN 4
#if NUM_SERVOS > 2 #endif
#define SERVO2_PIN 5 #endif
#endif #endif
#if NUM_SERVOS > 3
#define SERVO3_PIN 4
#endif #endif
#define BEEPER_PIN 33 #define BEEPER_PIN 33
...@@ -4525,7 +4504,7 @@ ...@@ -4525,7 +4504,7 @@
#define KILL_PIN 42 // A2 = 42 - teensy = 40 #define KILL_PIN 42 // A2 = 42 - teensy = 40
#define HOME_PIN -1 // A4 = marlin 44 - teensy = 42 #define HOME_PIN -1 // A4 = marlin 44 - teensy = 42
#if ENABLED(NUM_SERVOS) #if NUM_SERVOS > 0
#define SERVO0_PIN 41 // In teensy's pin definition for pinMode (in Servo.cpp) #define SERVO0_PIN 41 // In teensy's pin definition for pinMode (in Servo.cpp)
#endif #endif
...@@ -5112,9 +5091,6 @@ DaveX plan for Teensylu/printrboard-type pinouts (ref teensylu & sprinter) for a ...@@ -5112,9 +5091,6 @@ DaveX plan for Teensylu/printrboard-type pinouts (ref teensylu & sprinter) for a
********************************* END MOTHERBOARD *************************************** ********************************* END MOTHERBOARD ***************************************
/****************************************************************************************/ /****************************************************************************************/
#if DISABLED(KNOWN_BOARD)
#error Unknown MOTHERBOARD value in configuration.h
#endif
#ifndef ORIG_HEATER_1_PIN #ifndef ORIG_HEATER_1_PIN
#define ORIG_HEATER_1_PIN -1 #define ORIG_HEATER_1_PIN -1
......
MarlinKimbra/stepper.cpp
View file @ 701efac2
...@@ -673,7 +673,7 @@ ISR(TIMER1_COMPA_vect) { ...@@ -673,7 +673,7 @@ ISR(TIMER1_COMPA_vect) {
STEP_START(e,E); STEP_START(e,E);
#endif #endif
#if ENABLED(STEPPER_HIGH_LOW_DELAY) && STEPPER_HIGH_LOW_DELAY > 0 #if EXIST(STEPPER_HIGH_LOW_DELAY) && STEPPER_HIGH_LOW_DELAY > 0
delayMicroseconds(STEPPER_HIGH_LOW_DELAY); delayMicroseconds(STEPPER_HIGH_LOW_DELAY);
#endif #endif
...@@ -1187,7 +1187,7 @@ void quickStop() { ...@@ -1187,7 +1187,7 @@ void quickStop() {
case Z_AXIS: { case Z_AXIS: {
#if DISABLED(DELTA) #if !MECH(DELTA)
BABYSTEP_AXIS(z, Z, BABYSTEP_INVERT_Z); BABYSTEP_AXIS(z, Z, BABYSTEP_INVERT_Z);
......
MarlinKimbra/temperature.cpp
View file @ 701efac2
...@@ -154,10 +154,10 @@ static int minttemp_raw[HOTENDS] = ARRAY_BY_HOTENDS( HEATER_0_RAW_LO_TEMP , HEAT ...@@ -154,10 +154,10 @@ static int minttemp_raw[HOTENDS] = ARRAY_BY_HOTENDS( HEATER_0_RAW_LO_TEMP , HEAT
static int maxttemp_raw[HOTENDS] = ARRAY_BY_HOTENDS( HEATER_0_RAW_HI_TEMP , HEATER_1_RAW_HI_TEMP , HEATER_2_RAW_HI_TEMP, HEATER_3_RAW_HI_TEMP); static int maxttemp_raw[HOTENDS] = ARRAY_BY_HOTENDS( HEATER_0_RAW_HI_TEMP , HEATER_1_RAW_HI_TEMP , HEATER_2_RAW_HI_TEMP, HEATER_3_RAW_HI_TEMP);
static int minttemp[HOTENDS] = { 0 }; static int minttemp[HOTENDS] = { 0 };
static int maxttemp[HOTENDS] = ARRAY_BY_HOTENDS1( 16383 ); static int maxttemp[HOTENDS] = ARRAY_BY_HOTENDS1( 16383 );
#if ENABLED(BED_MINTEMP) #if EXIST(BED_MINTEMP)
static int bed_minttemp_raw = HEATER_BED_RAW_LO_TEMP; static int bed_minttemp_raw = HEATER_BED_RAW_LO_TEMP;
#endif #endif
#if ENABLED(BED_MAXTEMP) #if EXIST(BED_MAXTEMP)
static int bed_maxttemp_raw = HEATER_BED_RAW_HI_TEMP; static int bed_maxttemp_raw = HEATER_BED_RAW_HI_TEMP;
#endif #endif
......
MarlinKimbra/thermistortables.h
View file @ 701efac2
...@@ -1080,7 +1080,7 @@ const short temptable_1047[][2] PROGMEM = { ...@@ -1080,7 +1080,7 @@ const short temptable_1047[][2] PROGMEM = {
#endif #endif
#define _TT_NAME(_N) temptable_ # #_N #define _TT_NAME(_N) temptable_ ## _N
#define TT_NAME(_N) _TT_NAME(_N) #define TT_NAME(_N) _TT_NAME(_N)
#if ENABLED(THERMISTORHEATER_0) #if ENABLED(THERMISTORHEATER_0)
......
MarlinKimbra/ultralcd.cpp
View file @ 701efac2
...@@ -12,7 +12,7 @@ int8_t encoderDiff; // updated from interrupt context and added to encoderPositi ...@@ -12,7 +12,7 @@ int8_t encoderDiff; // updated from interrupt context and added to encoderPositi
bool encoderRateMultiplierEnabled; bool encoderRateMultiplierEnabled;
int32_t lastEncoderMovementMillis; int32_t lastEncoderMovementMillis;
#if DISABLED(DELTA) && DISABLED(Z_SAFE_HOMING) && Z_HOME_DIR < 0 #if !MECH(DELTA) && DISABLED(Z_SAFE_HOMING) && Z_HOME_DIR < 0
int pageShowInfo = 0; int pageShowInfo = 0;
void set_pageShowInfo(int value){ pageShowInfo = value; } void set_pageShowInfo(int value){ pageShowInfo = value; }
#endif #endif
...@@ -84,7 +84,7 @@ static void lcd_status_screen(); ...@@ -84,7 +84,7 @@ static void lcd_status_screen();
#if MECH(DELTA) #if MECH(DELTA)
static void lcd_delta_calibrate_menu(); static void lcd_delta_calibrate_menu();
#elif DISABLED(DELTA) && DISABLED(Z_SAFE_HOMING) && Z_HOME_DIR < 0 #elif !MECH(DELTA) && DISABLED(Z_SAFE_HOMING) && Z_HOME_DIR < 0
static void lcd_level_bed(); static void lcd_level_bed();
static void config_lcd_level_bed(); static void config_lcd_level_bed();
#endif // DELTA #endif // DELTA
...@@ -118,17 +118,17 @@ static void lcd_status_screen(); ...@@ -118,17 +118,17 @@ static void lcd_status_screen();
#define ENCODER_FEEDRATE_DEADZONE 10 #define ENCODER_FEEDRATE_DEADZONE 10
#if DISABLED(LCD_I2C_VIKI) #if DISABLED(LCD_I2C_VIKI)
#if DISABLED(ENCODER_STEPS_PER_MENU_ITEM) #if NOTEXIST(ENCODER_STEPS_PER_MENU_ITEM)
#define ENCODER_STEPS_PER_MENU_ITEM 5 #define ENCODER_STEPS_PER_MENU_ITEM 5
#endif #endif
#if DISABLED(ENCODER_PULSES_PER_STEP) #if NOTEXIST(ENCODER_PULSES_PER_STEP)
#define ENCODER_PULSES_PER_STEP 1 #define ENCODER_PULSES_PER_STEP 1
#endif #endif
#else #else
#if DISABLED(ENCODER_STEPS_PER_MENU_ITEM) #if NOTEXIST(ENCODER_STEPS_PER_MENU_ITEM)
#define ENCODER_STEPS_PER_MENU_ITEM 2 // VIKI LCD rotary encoder uses a different number of steps per rotation #define ENCODER_STEPS_PER_MENU_ITEM 2 // VIKI LCD rotary encoder uses a different number of steps per rotation
#endif #endif
#if DISABLED(ENCODER_PULSES_PER_STEP) #if NOTEXIST(ENCODER_PULSES_PER_STEP)
#define ENCODER_PULSES_PER_STEP 1 #define ENCODER_PULSES_PER_STEP 1
#endif #endif
#endif #endif
...@@ -547,19 +547,19 @@ static void lcd_tune_menu() { ...@@ -547,19 +547,19 @@ static void lcd_tune_menu() {
MENU_ITEM(back, MSG_MAIN, lcd_main_menu); MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
MENU_ITEM_EDIT(int3, MSG_SPEED, &feedrate_multiplier, 10, 999); MENU_ITEM_EDIT(int3, MSG_SPEED, &feedrate_multiplier, 10, 999);
#if TEMP_SENSOR_0 != 0 #if TEMP_SENSOR_0 != 0
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 0", &target_temperature[0], 0, HEATER_0_MAXTEMP + LCD_MAX_TEMP_OFFSET); MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 0", &target_temperature[0], 0, HEATER_0_MAXTEMP);
#endif #endif
#if TEMP_SENSOR_1 != 0 #if TEMP_SENSOR_1 != 0
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 1", &target_temperature[1], 0, HEATER_1_MAXTEMP + LCD_MAX_TEMP_OFFSET); MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 1", &target_temperature[1], 0, HEATER_1_MAXTEMP);
#endif #endif
#if TEMP_SENSOR_2 != 0 #if TEMP_SENSOR_2 != 0
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 2", &target_temperature[2], 0, HEATER_2_MAXTEMP + LCD_MAX_TEMP_OFFSET); MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 2", &target_temperature[2], 0, HEATER_2_MAXTEMP);
#endif #endif
#if TEMP_SENSOR_3 != 0 #if TEMP_SENSOR_3 != 0
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 3", &target_temperature[3], 0, HEATER_3_MAXTEMP + LCD_MAX_TEMP_OFFSET); MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 3", &target_temperature[3], 0, HEATER_3_MAXTEMP);
#endif #endif
#if TEMP_SENSOR_BED != 0 #if TEMP_SENSOR_BED != 0
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP + LCD_MAX_TEMP_OFFSET); MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP);
#endif #endif
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255); MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255);
MENU_ITEM_EDIT(int3, MSG_FLOW " 0", &extruder_multiplier[0], 10, 999); MENU_ITEM_EDIT(int3, MSG_FLOW " 0", &extruder_multiplier[0], 10, 999);
...@@ -775,7 +775,7 @@ static void lcd_prepare_motion_menu() { ...@@ -775,7 +775,7 @@ static void lcd_prepare_motion_menu() {
#if ENABLED(AUTO_BED_LEVELING_FEATURE) #if ENABLED(AUTO_BED_LEVELING_FEATURE)
if (axis_known_position[X_AXIS] && axis_known_position[Y_AXIS]) if (axis_known_position[X_AXIS] && axis_known_position[Y_AXIS])
MENU_ITEM(gcode, MSG_LEVEL_BED, PSTR("G29")); MENU_ITEM(gcode, MSG_LEVEL_BED, PSTR("G29"));
#elif DISABLED(DELTA) && DISABLED(Z_SAFE_HOMING) && Z_HOME_DIR < 0 #elif !MECH(DELTA) && DISABLED(Z_SAFE_HOMING) && Z_HOME_DIR < 0
MENU_ITEM(submenu, MSG_MBL_SETTING, config_lcd_level_bed); MENU_ITEM(submenu, MSG_MBL_SETTING, config_lcd_level_bed);
#endif #endif
...@@ -843,14 +843,14 @@ static void lcd_prepare_temperature_menu() { ...@@ -843,14 +843,14 @@ static void lcd_prepare_temperature_menu() {
// Nozzle, Nozzle 2, Nozzle 3, Nozzle 4 // Nozzle, Nozzle 2, Nozzle 3, Nozzle 4
// //
#if TEMP_SENSOR_0 != 0 #if TEMP_SENSOR_0 != 0
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 0", &target_temperature[0], 0, HEATER_0_MAXTEMP + LCD_MAX_TEMP_OFFSET); MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 0", &target_temperature[0], 0, HEATER_0_MAXTEMP);
#endif #endif
#if HOTENDS > 1 && TEMP_SENSOR_1 != 0 #if HOTENDS > 1 && TEMP_SENSOR_1 != 0
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 1", &target_temperature[1], 0, HEATER_1_MAXTEMP + LCD_MAX_TEMP_OFFSET); MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 1", &target_temperature[1], 0, HEATER_1_MAXTEMP);
#if HOTENDS > 2 && TEMP_SENSOR_2 != 0 #if HOTENDS > 2 && TEMP_SENSOR_2 != 0
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 2", &target_temperature[2], 0, HEATER_2_MAXTEMP + LCD_MAX_TEMP_OFFSET); MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 2", &target_temperature[2], 0, HEATER_2_MAXTEMP);
#if HOTENDS > 3 && TEMP_SENSOR_3 != 0 #if HOTENDS > 3 && TEMP_SENSOR_3 != 0
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 3", &target_temperature[3], 0, HEATER_3_MAXTEMP + LCD_MAX_TEMP_OFFSET); MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 3", &target_temperature[3], 0, HEATER_3_MAXTEMP);
#endif // HOTENDS > 3 #endif // HOTENDS > 3
#endif // HOTENDS > 2 #endif // HOTENDS > 2
#endif // HOTENDS > 1 #endif // HOTENDS > 1
...@@ -859,7 +859,7 @@ static void lcd_prepare_temperature_menu() { ...@@ -859,7 +859,7 @@ static void lcd_prepare_temperature_menu() {
// Bed // Bed
// //
#if TEMP_SENSOR_BED != 0 #if TEMP_SENSOR_BED != 0
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP + LCD_MAX_TEMP_OFFSET); MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP);
#endif #endif
// //
...@@ -1119,8 +1119,8 @@ static void lcd_control_temperature_menu() { ...@@ -1119,8 +1119,8 @@ static void lcd_control_temperature_menu() {
// //
#if ENABLED(AUTOTEMP) && (TEMP_SENSOR_0 != 0) #if ENABLED(AUTOTEMP) && (TEMP_SENSOR_0 != 0)
MENU_ITEM_EDIT(bool, MSG_AUTOTEMP, &autotemp_enabled); MENU_ITEM_EDIT(bool, MSG_AUTOTEMP, &autotemp_enabled);
MENU_ITEM_EDIT(float3, MSG_MIN, &autotemp_min, 0, HEATER_0_MAXTEMP + LCD_MAX_TEMP_OFFSET); MENU_ITEM_EDIT(float3, MSG_MIN, &autotemp_min, 0, HEATER_0_MAXTEMP);
MENU_ITEM_EDIT(float3, MSG_MAX, &autotemp_max, 0, HEATER_0_MAXTEMP + LCD_MAX_TEMP_OFFSET); MENU_ITEM_EDIT(float3, MSG_MAX, &autotemp_max, 0, HEATER_0_MAXTEMP);
MENU_ITEM_EDIT(float32, MSG_FACTOR, &autotemp_factor, 0.0, 1.0); MENU_ITEM_EDIT(float32, MSG_FACTOR, &autotemp_factor, 0.0, 1.0);
#endif #endif
...@@ -1198,10 +1198,10 @@ static void lcd_control_temperature_preheat_pla_settings_menu() { ...@@ -1198,10 +1198,10 @@ static void lcd_control_temperature_preheat_pla_settings_menu() {
MENU_ITEM(back, MSG_TEMPERATURE, lcd_control_temperature_menu); MENU_ITEM(back, MSG_TEMPERATURE, lcd_control_temperature_menu);
MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &plaPreheatFanSpeed, 0, 255); MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &plaPreheatFanSpeed, 0, 255);
#if TEMP_SENSOR_0 != 0 #if TEMP_SENSOR_0 != 0
MENU_ITEM_EDIT(int3, MSG_NOZZLE, &plaPreheatHotendTemp, HEATER_0_MINTEMP, HEATER_0_MAXTEMP + LCD_MAX_TEMP_OFFSET); MENU_ITEM_EDIT(int3, MSG_NOZZLE, &plaPreheatHotendTemp, HEATER_0_MINTEMP, HEATER_0_MAXTEMP);
#endif #endif
#if TEMP_SENSOR_BED != 0 #if TEMP_SENSOR_BED != 0
MENU_ITEM_EDIT(int3, MSG_BED, &plaPreheatHPBTemp, BED_MINTEMP, BED_MAXTEMP + LCD_MAX_TEMP_OFFSET); MENU_ITEM_EDIT(int3, MSG_BED, &plaPreheatHPBTemp, BED_MINTEMP, BED_MAXTEMP);
#endif #endif
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings); MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings);
...@@ -1219,10 +1219,10 @@ static void lcd_control_temperature_preheat_abs_settings_menu() { ...@@ -1219,10 +1219,10 @@ static void lcd_control_temperature_preheat_abs_settings_menu() {
MENU_ITEM(back, MSG_TEMPERATURE, lcd_control_temperature_menu); MENU_ITEM(back, MSG_TEMPERATURE, lcd_control_temperature_menu);
MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &absPreheatFanSpeed, 0, 255); MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &absPreheatFanSpeed, 0, 255);
#if TEMP_SENSOR_0 != 0 #if TEMP_SENSOR_0 != 0
MENU_ITEM_EDIT(int3, MSG_NOZZLE, &absPreheatHotendTemp, HEATER_0_MINTEMP, HEATER_0_MAXTEMP + LCD_MAX_TEMP_OFFSET); MENU_ITEM_EDIT(int3, MSG_NOZZLE, &absPreheatHotendTemp, HEATER_0_MINTEMP, HEATER_0_MAXTEMP);
#endif #endif
#if TEMP_SENSOR_BED != 0 #if TEMP_SENSOR_BED != 0
MENU_ITEM_EDIT(int3, MSG_BED, &absPreheatHPBTemp, BED_MINTEMP, BED_MAXTEMP + LCD_MAX_TEMP_OFFSET); MENU_ITEM_EDIT(int3, MSG_BED, &absPreheatHPBTemp, BED_MINTEMP, BED_MAXTEMP);
#endif #endif
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings); MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings);
...@@ -1240,10 +1240,10 @@ static void lcd_control_temperature_preheat_gum_settings_menu() { ...@@ -1240,10 +1240,10 @@ static void lcd_control_temperature_preheat_gum_settings_menu() {
MENU_ITEM(back, MSG_TEMPERATURE, lcd_control_temperature_menu); MENU_ITEM(back, MSG_TEMPERATURE, lcd_control_temperature_menu);
MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &gumPreheatFanSpeed, 0, 255); MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &gumPreheatFanSpeed, 0, 255);
#if TEMP_SENSOR_0 != 0 #if TEMP_SENSOR_0 != 0
MENU_ITEM_EDIT(int3, MSG_NOZZLE, &gumPreheatHotendTemp, HEATER_0_MINTEMP, HEATER_0_MAXTEMP + LCD_MAX_TEMP_OFFSET); MENU_ITEM_EDIT(int3, MSG_NOZZLE, &gumPreheatHotendTemp, HEATER_0_MINTEMP, HEATER_0_MAXTEMP);
#endif #endif
#if TEMP_SENSOR_BED != 0 #if TEMP_SENSOR_BED != 0
MENU_ITEM_EDIT(int3, MSG_BED, &gumPreheatHPBTemp, BED_MINTEMP, BED_MAXTEMP + LCD_MAX_TEMP_OFFSET); MENU_ITEM_EDIT(int3, MSG_BED, &gumPreheatHPBTemp, BED_MINTEMP, BED_MAXTEMP);
#endif #endif
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings); MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings);
...@@ -1837,7 +1837,7 @@ void lcd_update() { ...@@ -1837,7 +1837,7 @@ void lcd_update() {
// Return to Status Screen after a timeout // Return to Status Screen after a timeout
if (currentMenu != lcd_status_screen && if (currentMenu != lcd_status_screen &&
#if DISABLED(DELTA) && DISABLED(Z_SAFE_HOMING) && Z_HOME_DIR < 0 #if !MECH(DELTA) && DISABLED(Z_SAFE_HOMING) && Z_HOME_DIR < 0
currentMenu != lcd_level_bed && currentMenu != lcd_level_bed &&
#endif #endif
millis() > return_to_status_ms millis() > return_to_status_ms
...@@ -2303,7 +2303,7 @@ char *ftostr52(const float &x) { ...@@ -2303,7 +2303,7 @@ char *ftostr52(const float &x) {
return conv; return conv;
} }
#if DISABLED(DELTA) && DISABLED(Z_SAFE_HOMING) && Z_HOME_DIR < 0 #if !MECH(DELTA) && DISABLED(Z_SAFE_HOMING) && Z_HOME_DIR < 0
static void lcd_level_bed() { static void lcd_level_bed() {
......
MarlinKimbra/ultralcd.h
View file @ 701efac2
...@@ -29,7 +29,7 @@ ...@@ -29,7 +29,7 @@
void lcd_setcontrast(uint8_t value); void lcd_setcontrast(uint8_t value);
#endif #endif
#if DISABLED(DELTA) && DISABLED(Z_SAFE_HOMING) && Z_HOME_DIR < 0 #if !MECH(DELTA) && DISABLED(Z_SAFE_HOMING) && Z_HOME_DIR < 0
void set_pageShowInfo(int value); void set_pageShowInfo(int value);
#endif #endif
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment