Update readme and eeprom settings

MK/Configuration_Store.cpp

@@ -37,7 +37,7 @@
  */
 #include "base.h"
 
-#define EEPROM_VERSION "MKV428"
+#define EEPROM_VERSION "MKV429"
 
 /**
  * MKV428 EEPROM Layout:

README.md

 <img align="right" src="Documentation/Logo/MarlinKimbra%20Logo%20GitHub.png" />
 # MarlinKimbra 3D Printer Firmware for Arduino
-## Version 4.2.84 dev
+## Version 4.2.84 Laser dev
+
+This is the Laser enhananced version with the patches from Franco (nextime) Lanza.
+
+If you like to help the work on Laser version, please donate to 
+
+https://www.nexlab.net/donations/k40-laser/
+[DONATIONS id:1269]
+
+
+For K40 laser cutter there are branches with the default config files ready to use:
+
+ * [with cooler and flow sensor](https://git.nexlab.net/machinery/MarlinKimbra/tree/k40_flow_cooler)
+ * [without cooler and flow sensor](https://git.nexlab.net/machinery/MarlinKimbra/tree/k40_noflow_nocooler)
+
+Also, take care that lasers needs a larger serial buffer on arduino mega 2560 than the default 64 byte buffer, so
+take a look at needed modification on the arduino ide from [Laser Documentation README](/Documentation/Laser/README.md)
 
 ### Special thanks
 * all Marlin8bit-developers.
@@ -30,25 +46,25 @@ http://marlinkimbra.it
 
 This version of Marlin was made to accommodate some requests made by the community RepRap Italy http://forums.reprap.org/index.php?349
 The new features are:
-A single Firmware for all types of printers; Cartesian, Delta, SCARA, CoreXY & CoreXZ.
-The possibility of having only one hotend independently from the extruders that you have.
-The addition of the 6th extruder.
-Management Color Mixing Extruder
-System Management MKr4 for 6 extruders with just two drivers or only driver.
-Management Multyextruder NPr2, 4/6 extruders with only two engines.
-Management Dual Extruder DONDOLO.
-Adding commands to facilitate purging of hotend. 
-Step per unit varied for each extruder as well as the feedrate and the acceleration.
-Adding Debug Dryrun used by repetier.
-Added total Power on time writed in SD CARD.
-Added total Power consumption writed in SD CARD.
-Added total filament printed writed in SD CARD.
-Added anti extruder idle oozing system.
-Added Hysteresis and Z-Wobble correction (only cartesian printers).
-Added support reader TAG width MFRC522
-Added Cooler and Hot Chamber
-Added Laser beam and raster base64
-Addes Mesh Bed Level (MBL)
+ - A single Firmware for all types of printers; Cartesian, Delta, SCARA, CoreXY & CoreXZ.
+ - The possibility of having only one hotend independently from the extruders that you have.
+ - The addition of the 6th extruder.
+ - Management Color Mixing Extruder
+ - System Management MKr4 for 6 extruders with just two drivers or only driver.
+ - Management Multyextruder NPr2, 4/6 extruders with only two engines.
+ - Management Dual Extruder DONDOLO.
+ - Adding commands to facilitate purging of hotend. 
+ - Step per unit varied for each extruder as well as the feedrate and the acceleration.
+ - Adding Debug Dryrun used by repetier.
+ - Added total Power on time writed in SD CARD.
+ - Added total Power consumption writed in SD CARD.
+ - Added total filament printed writed in SD CARD.
+ - Added anti extruder idle oozing system.
+ - Added Hysteresis and Z-Wobble correction (only cartesian printers).
+ - Added support reader TAG width MFRC522
+ - Added Cooler and Hot Chamber
+ - Added Laser beam and raster base64
+ - Added Mesh Bed Level (MBL)
 
 ## Credits