Fix Language

MarlinKimbra/Configuration.h

@@ -104,7 +104,7 @@
 #define EXTRUDERS 1
 
 //This is used for singlenozzled multiple extrusion configuration
-// Uncomment below to enable SINGLENOZZLE (One Hotend)
+// Uncomment below to enable (One Hotend)
 //#define SINGLENOZZLE
 
 /***********************************************************************

MarlinKimbra/Configuration_Cartesian.h

@@ -58,12 +58,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 #define DISABLE_INACTIVE_EXTRUDER false //disable only inactive extruders and keep active extruder enabled
 
 #define INVERT_X_DIR false     // for Mendel set to false, for Orca set to true
-#define INVERT_Y_DIR true      // for Mendel set to true, for Orca set to false
+#define INVERT_Y_DIR false     // for Mendel set to true, for Orca set to false
 #define INVERT_Z_DIR false     // for Mendel set to false, for Orca set to true
-#define INVERT_E0_DIR true     // for direct drive extruder v9 set to true, for geared extruder set to false
-#define INVERT_E1_DIR true     // for direct drive extruder v9 set to true, for geared extruder set to false
-#define INVERT_E2_DIR true     // for direct drive extruder v9 set to true, for geared extruder set to false
-#define INVERT_E3_DIR true     // for direct drive extruder v9 set to true, for geared extruder set to false
+#define INVERT_E0_DIR false    // for direct drive extruder v9 set to true, for geared extruder set to false
+#define INVERT_E1_DIR false    // for direct drive extruder v9 set to true, for geared extruder set to false
+#define INVERT_E2_DIR false    // for direct drive extruder v9 set to true, for geared extruder set to false
+#define INVERT_E3_DIR false    // for direct drive extruder v9 set to true, for geared extruder set to false
 
 // ENDSTOP SETTINGS:
 // Sets direction of endstops when homing; 1=MAX, -1=MIN
@@ -247,4 +247,4 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 // Use M206 command to correct for switch height offset to actual nozzle height. Store that setting with M500.
 //
 //#define SERVO_ENDSTOPS {-1, -1, 0} // Servo index for X, Y, Z. Disable with -1
-//#define SERVO_ENDSTOP_ANGLES {0,0, 0,0, 90,0} // X,Y,Z Axis Extend and Retract angles
+//#define SERVO_ENDSTOP_ANGLES {0,0, 0,0, 90,0} // X,Y,Z Axis Extend and Retract angles
\ No newline at end of file