Skip to content

M
MarlinKimbra
Commit 52727590 authored by MagoKimbra's avatar MagoKimbra
Browse files
Options

Fix

parent 9a9328d3
Hide whitespace changes
Inline Side-by-side
Showing with 145 additions and 128 deletions
MarlinKimbra/Configuration.h
View file @ 52727590
......@@ -8,8 +8,11 @@
// User-specified version info of this build to display in [Pronterface, etc] terminal window during
// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
// build by the user have been successfully uploaded into firmware.
#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
#define STRING_CONFIG_H_AUTHOR "(MagoKimbra: magokimbra@hotmail.com, Version 4.0)" // Who made the changes.
#define STRING_VERSION "v4.0.2"
#define STRING_URL "reprap.org"
#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
#define STRING_CONFIG_H_AUTHOR "(MagoKimbra: magokimbra@hotmail.com)" // Who made the changes.
#define STRING_SPLASH STRING_VERSION " - " STRING_URL // will be shown during bootu
// SERIAL_PORT selects which serial port should be used for communication with the host.
// This allows the connection of wireless adapters (for instance) to non-default port pins.
......@@ -218,6 +221,7 @@
#ifdef PIDTEMP
//#define PID_DEBUG // Sends debug data to the serial port.
//#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
// is more then PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
#define PID_INTEGRAL_DRIVE_MAX PID_MAX //limit for the integral term
......@@ -358,7 +362,7 @@
// The Elefu RA Board Control Panel
// http://www.elefu.com/index.php?route=product/product&product_id=53
// REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARUDINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C
// REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARDUINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C
//#define RA_CONTROL_PANEL
//automatic expansion
......
MarlinKimbra/DOGMbitmaps.h
View file @ 52727590
#define START_BMPWIDTH 60 //Width in pixels
#define START_BMPHEIGHT 64 //Height in pixels
#define START_BMPBYTEWIDTH 8 //Width in bytes
const unsigned char start_bmp[574] PROGMEM = { //AVR-GCC, WinAVR
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,
0xFF,0xFF,0xFF,0xF9,0xFF,0xFF,0xFF,0xF0,
0xFF,0xFF,0xFF,0xF0,0xFF,0xFF,0xFF,0xF0,
0xFF,0xFF,0xFF,0xE0,0x7F,0xFF,0xFF,0xF0,
0xFF,0xFF,0xFF,0xC0,0x3F,0xFF,0xFF,0xF0,
0xFF,0xFF,0xFF,0x80,0x1F,0xFF,0xFF,0xF0,
0xFF,0xFF,0xFF,0x00,0x0F,0xFF,0xFF,0xF0,
0xFF,0xFF,0xFE,0x00,0x07,0xFF,0xFF,0xF0,
0xFF,0xFF,0xFC,0x00,0x03,0xFF,0xFF,0xF0,
0xFF,0xFF,0xF8,0x00,0x01,0xFF,0xFF,0xF0,
0xFF,0xFF,0xF0,0x00,0x00,0xFF,0xFF,0xF0,
0xFF,0xFF,0xE0,0x00,0x00,0x7F,0xFF,0xF0,
0xFF,0xFF,0xC0,0x00,0x00,0x3F,0xFF,0xF0,
0xFF,0xFF,0x80,0x00,0x00,0x3F,0xFF,0xF0,
0xFF,0xFF,0x00,0x00,0x00,0x1F,0xFF,0xF0,
0xFF,0xFE,0x00,0x00,0x00,0x0F,0xFF,0xF0,
0xFF,0xFE,0x00,0x00,0x00,0x07,0xFF,0xF0,
0xFF,0xFC,0x00,0x00,0x00,0x07,0xFF,0xF0,
0xFF,0xFC,0x00,0x00,0x00,0x03,0xFF,0xF0,
0xFF,0xF8,0x00,0x00,0x00,0x03,0xFF,0xF0,
0xFF,0xF8,0x00,0x00,0x00,0x03,0xFF,0xF0,
0xFF,0xF8,0x00,0x00,0x00,0x01,0xFF,0xF0,
0xFF,0xF8,0x00,0x00,0x00,0x01,0xFF,0xF0,
0xFF,0xF8,0x00,0x00,0x00,0x01,0xFF,0xF0,
0xFF,0xF8,0x00,0x00,0x00,0x01,0xFF,0xF0,
0xFF,0xF8,0x00,0x00,0x00,0x01,0xFF,0xF0,
0xFF,0xF8,0x00,0x00,0x00,0x01,0xFF,0xF0,
0xFF,0xF8,0x00,0x00,0x00,0x01,0xFF,0xF0,
0xFF,0xF8,0x00,0x00,0x00,0x01,0xFF,0xF0,
0xFF,0xF8,0x00,0x00,0x00,0x03,0xFF,0xF0,
0xFF,0xF8,0x00,0x00,0x00,0x03,0xFF,0xF0,
0xFF,0xFC,0x00,0x00,0x00,0x03,0xFF,0xF0,
0xFF,0xFC,0x00,0x00,0x00,0x07,0xFF,0xF0,
0xFF,0xFE,0x00,0x00,0x00,0x07,0xFF,0xF0,
0xFF,0xFE,0x00,0x00,0x00,0x0F,0xFF,0xF0,
0xFF,0xFF,0x00,0x00,0x00,0x1F,0xFF,0xF0,
0xFF,0xFF,0x80,0x00,0x00,0x1F,0xFF,0xF0,
0xFF,0xFF,0xC0,0x00,0x00,0x3F,0xFF,0xF0,
0xFF,0xFF,0xE0,0x00,0x00,0x7F,0xFF,0xF0,
0xFF,0xFF,0xF0,0x00,0x01,0xFF,0xFF,0xF0,
0xFF,0xFF,0xFC,0x00,0x03,0xFF,0xFF,0xF0,
0xFF,0xFF,0xFF,0x00,0x1F,0xFF,0xFF,0xF0,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,
0x83,0xFF,0xFF,0xFE,0x0F,0xFF,0xFF,0xF0,
0x80,0xFF,0xFF,0xFE,0x03,0xFF,0xFF,0xF0,
0x88,0x7F,0xFF,0xFE,0x23,0xFF,0xFF,0xF0,
0x8C,0x70,0x38,0x0E,0x71,0x81,0xC0,0x70,
0x8C,0x60,0x38,0x0E,0x63,0x80,0xC0,0x30,
0x80,0xE3,0x19,0xC6,0x07,0xF8,0xC7,0x30,
0x80,0xE0,0x19,0xC6,0x03,0x80,0xC7,0x10,
0x8C,0x62,0x79,0xC6,0x63,0x9C,0xC7,0x30,
0x8C,0x63,0xF8,0xC6,0x71,0x18,0xC6,0x30,
0x8E,0x30,0x18,0x0E,0x71,0x80,0xC0,0x30,
0x9E,0x38,0x39,0x1E,0x79,0xC4,0xC4,0xF0,
0xFF,0xFF,0xF9,0xFF,0xFF,0xFF,0xC7,0xF0,
0xFF,0xFF,0xF9,0xFF,0xFF,0xFF,0xC7,0xF0,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0
};
// BitMap for splashscreen
// Generated with: http://www.digole.com/tools/PicturetoC_Hex_converter.php
// Please note that using the high-res version takes about 0.5KB of
#ifdef START_BMPHIGH
#define START_BMPWIDTH 112
#define START_BMPHEIGHT 38
#define START_BMPBYTEWIDTH 14
#define START_BMPBYTES 532 // START_BMPWIDTH * START_BMPHEIGHT / 8
const unsigned char start_bmp[START_BMPBYTES] PROGMEM = {
0x01,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff
,0x0f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff
,0x1e,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0xff,0xff
,0x38,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0xff,0xff
,0x70,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0xff,0xff
,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xff,0xff
,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7f,0xff
,0xc0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x78,0x00,0x00,0x3f,0xff
,0xc0,0x0f,0xc0,0xfc,0x00,0x00,0x00,0x00,0x00,0x78,0x18,0x00,0x1f,0xff
,0xc0,0x3f,0xe1,0xff,0x00,0x00,0x00,0x00,0x00,0x78,0x3c,0x00,0x0f,0xff
,0xc0,0x7f,0xf3,0xff,0x80,0x00,0x00,0x00,0x00,0x78,0x3c,0x00,0x07,0xff
,0xc0,0xff,0xff,0xff,0xc0,0x00,0x00,0x00,0x00,0x78,0x3c,0x00,0x03,0xff
,0xc1,0xf8,0x7f,0x87,0xe0,0x00,0x00,0x00,0x00,0x78,0x00,0x00,0x01,0xff
,0xc1,0xf0,0x3f,0x03,0xe0,0x00,0x00,0x00,0x00,0x78,0x00,0x00,0x00,0xff
,0xc1,0xe0,0x1e,0x01,0xe0,0x1f,0x00,0x03,0xe0,0x78,0x3c,0x03,0xf0,0x7f
,0xc1,0xe0,0x1e,0x01,0xe0,0x7f,0xc0,0x0f,0xf8,0x78,0x3c,0x07,0xfc,0x3f
,0xc1,0xe0,0x1e,0x01,0xe1,0xff,0xe0,0x1f,0xfc,0x78,0x3c,0x0f,0xfe,0x1f
,0xc1,0xe0,0x1e,0x01,0xe3,0xff,0xf0,0x3f,0xfe,0x78,0x3c,0x1f,0xfe,0x0f
,0xc1,0xe0,0x1e,0x01,0xe3,0xf3,0xf8,0x3f,0x3e,0x78,0x3c,0x3f,0x3f,0x07
,0xc1,0xe0,0x1e,0x01,0xe7,0xe0,0xfc,0x7c,0x1f,0x78,0x3c,0x3e,0x1f,0x07
,0xc1,0xe0,0x1e,0x01,0xe7,0xc0,0x7c,0x7c,0x0f,0x78,0x3c,0x3c,0x0f,0x03
,0xc1,0xe0,0x1e,0x01,0xe7,0x80,0x7c,0x78,0x0f,0x78,0x3c,0x3c,0x0f,0x03
,0xc1,0xe0,0x1e,0x01,0xe7,0x80,0x3c,0x78,0x00,0x78,0x3c,0x3c,0x0f,0x03
,0xc1,0xe0,0x1e,0x01,0xe7,0x80,0x3c,0x78,0x00,0x78,0x3c,0x3c,0x0f,0x03
,0xc1,0xe0,0x1e,0x01,0xe7,0x80,0x3c,0x78,0x00,0x78,0x3c,0x3c,0x0f,0x03
,0xc1,0xe0,0x1e,0x01,0xe7,0xc0,0x3c,0x78,0x00,0x78,0x3c,0x3c,0x0f,0x03
,0xc1,0xe0,0x1e,0x01,0xe3,0xe0,0x3c,0x78,0x00,0x7c,0x3c,0x3c,0x0f,0x03
,0xc1,0xe0,0x1e,0x01,0xe3,0xff,0x3f,0xf8,0x00,0x7f,0xbc,0x3c,0x0f,0x03
,0xc1,0xe0,0x1e,0x01,0xe1,0xff,0x3f,0xf8,0x00,0x3f,0xbf,0xfc,0x0f,0x03
,0xc1,0xe0,0x1e,0x01,0xe0,0xff,0x3f,0xf8,0x00,0x1f,0xbf,0xfc,0x0f,0x03
,0xc1,0xe0,0x1e,0x01,0xe0,0x7f,0x3f,0xf8,0x00,0x0f,0xbf,0xfc,0x0f,0x03
,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07
,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x06
,0x70,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0e
,0x38,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1c
,0x1e,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x78
,0x0f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xf0
,0x01,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x80 };
#else
#define START_BMPWIDTH 56
#define START_BMPHEIGHT 19
#define START_BMPBYTEWIDTH 7
#define START_BMPBYTES 133 // START_BMPWIDTH * START_BMPHEIGHT / 8
const unsigned char start_bmp[START_BMPBYTES] PROGMEM = {
0x1f,0xff,0xff,0xff,0xff,0xff,0xff
,0x60,0x00,0x00,0x00,0x00,0x01,0xff
,0x40,0x00,0x00,0x00,0x00,0x00,0xff
,0x80,0x00,0x00,0x00,0x00,0x00,0x7f
,0x83,0xcf,0x00,0x00,0x0c,0x30,0x3f
,0x87,0xff,0x80,0x00,0x0c,0x30,0x1f
,0x86,0x79,0x80,0x00,0x0c,0x00,0x0f
,0x8c,0x30,0xc7,0x83,0x8c,0x30,0xe7
,0x8c,0x30,0xcf,0xc7,0xcc,0x31,0xf3
,0x8c,0x30,0xdc,0xec,0xec,0x33,0xb9
,0x8c,0x30,0xd8,0x6c,0x6c,0x33,0x19
,0x8c,0x30,0xd0,0x6c,0x0c,0x33,0x19
,0x8c,0x30,0xd8,0x6c,0x0c,0x33,0x19
,0x8c,0x30,0xdc,0x6c,0x0e,0x3b,0x19
,0x8c,0x30,0xcf,0x7c,0x07,0x9f,0x19
,0x8c,0x30,0xc7,0x7c,0x03,0x8f,0x19
,0x40,0x00,0x00,0x00,0x00,0x00,0x02
,0x60,0x00,0x00,0x00,0x00,0x00,0x06
,0x1f,0xff,0xff,0xff,0xff,0xff,0xf8 };
#endif
// Here comes a compile-time operation to match the extruder symbols
// on the info screen to the set number of extruders in configuration.h
......
MarlinKimbra/Marlin_main.cpp
View file @ 52727590
......@@ -65,7 +65,7 @@
#include "firmware_test.h"
#endif
#define VERSION_STRING " 4.0.1 "
#define VERSION_STRING "4.0.2"
// look here for descriptions of G-codes: http://linuxcnc.org/handbook/gcode/g-code.html
// http://objects.reprap.org/wiki/Mendel_User_Manual:_RepRapGCodes
......
MarlinKimbra/dogm_lcd_implementation.h
View file @ 52727590
......@@ -14,7 +14,7 @@
#ifndef DOGM_LCD_IMPLEMENTATION_H
#define DOGM_LCD_IMPLEMENTATION_H
#define MARLIN_VERSION "4.0.1"
#define MARLIN_VERSION "4.0.2"
/**
* Implementation of the LCD display routines for a DOGM128 graphic display. These are common LCD 128x64 pixel graphic displays.
......@@ -42,7 +42,7 @@
/* Russian language not supported yet, needs custom font
#if LANGUAGE_CHOICE == 6
#ifdef LANGUAGE_RU
#include "LiquidCrystalRus.h"
#define LCD_CLASS LiquidCrystalRus
#else
......@@ -86,46 +86,53 @@ U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0);
U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0); // HW-SPI Com: CS, A0
#endif
static void lcd_implementation_init() {
#ifdef LCD_PIN_BL
pinMode(LCD_PIN_BL, OUTPUT); // Enable LCD backlight
digitalWrite(LCD_PIN_BL, HIGH);
static void lcd_implementation_init()
{
#ifdef LCD_PIN_BL // Enable LCD backlight
pinMode(LCD_PIN_BL, OUTPUT);
digitalWrite(LCD_PIN_BL, HIGH);
#endif
u8g.setContrast(lcd_contrast);
/*
// Uncomment this if you have the first generation (V1.10) of STBs board
pinMode(17, OUTPUT); // Enable LCD backlight
digitalWrite(17, HIGH);
//*/
u8g.firstPage();
do {
u8g.setFont(u8g_font_6x10_marlin);
u8g.setColorIndex(1);
u8g.drawBox (0, 0, u8g.getWidth(), u8g.getHeight());
u8g.setColorIndex(1);
} while( u8g.nextPage() );
#if defined(LCD_SCREEN_ROT_90)
u8g.setRot90(); // Rotate screen by 90°
#elif defined(LCD_SCREEN_ROT_180)
u8g.setRot180(); // Rotate screen by 180°
#elif defined(LCD_SCREEN_ROT_270)
u8g.setRot270(); // Rotate screen by 270°
#endif
u8g.firstPage();
u8g.setContrast(lcd_contrast);
// FIXME: remove this workaround
// Uncomment this if you have the first generation (V1.10) of STBs board
// pinMode(17, OUTPUT); // Enable LCD backlight
// digitalWrite(17, HIGH);
#ifdef LCD_SCREEN_ROT_90
u8g.setRot90(); // Rotate screen by 90°
#elif defined(LCD_SCREEN_ROT_180)
u8g.setRot180(); // Rotate screen by 180°
#elif defined(LCD_SCREEN_ROT_270)
u8g.setRot270(); // Rotate screen by 270°
#endif
// FIXME: whats the purpose of the box? Maybe clear screen?
u8g.firstPage();
do {
// RepRap init bmp
u8g.drawBitmapP(7,7,START_BMPBYTEWIDTH,START_BMPHEIGHT,start_bmp);
// Welcome message
u8g.setFont(u8g_font_6x10_marlin);
u8g.setColorIndex(1);
u8g.drawBox (0, 0, u8g.getWidth(), u8g.getHeight());
u8g.setColorIndex(1);
} while(u8g.nextPage());
// Show splashscreen
int off = (u8g.getWidth() - START_BMPWIDTH) / 2;
int txtX = (u8g.getWidth() - sizeof(STRING_SPLASH) - 1) / 2;
int txtY = u8g.getHeight() - 10;
u8g.firstPage();
do {
#ifdef START_BMPHIGH
u8g.drawBitmapP(off, off, START_BMPBYTEWIDTH, START_BMPHEIGHT, start_bmp);
#else
u8g.setScale2x2();
u8g.drawBitmapP(off, off, START_BMPBYTEWIDTH, START_BMPHEIGHT, start_bmp);
u8g.undoScale();
#endif
u8g.setFont(u8g_font_5x8);
u8g.drawStr(7, 51, "V" MARLIN_VERSION " - marlin.reprap.org");
} while( u8g.nextPage() );
u8g.drawStr(txtX, txtY, STRING_SPLASH);
} while(u8g.nextPage());
}
static void lcd_implementation_clear() { } // Automatically cleared by Picture Loop
......
MarlinKimbra/language_en.h
View file @ 52727590
......@@ -156,11 +156,11 @@
#define MSG_RETRACT_XMM "Retract " STRINGIFY(LCD_RETRACT_LENGTH) "mm"
#ifdef DELTA
#define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
#define MSG_DELTA_CALIBRATE_Y "Calibrate Y"
#define MSG_DELTA_CALIBRATE_Z "Calibrate Z"
#define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center"
#define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
#define MSG_DELTA_CALIBRATE_Y "Calibrate Y"
#define MSG_DELTA_CALIBRATE_Z "Calibrate Z"
#define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center"
#endif // DELTA
#ifdef FIRMWARE_TEST
......
MarlinKimbra/language_it.h
View file @ 52727590
......@@ -123,10 +123,10 @@
#define MSG_DWELL "Sospensione..."
#define MSG_USERWAIT "Attendi Utente..."
#define MSG_RESUMING "Riprendi Stampa"
#define MSG_PRINT_ABORTED "Print aborted"
#define MSG_NO_MOVE "Nessun Movimento."
#define MSG_KILLED "UCCISO. "
#define MSG_STOPPED "ARRESTATO. "
#define MSG_PRINT_ABORTED "Stampa abortita"
#define MSG_NO_MOVE "Nessun Movimento"
#define MSG_KILLED "UCCISO "
#define MSG_STOPPED "ARRESTATO "
#define MSG_CONTROL_RETRACT "Ritrai mm"
#define MSG_CONTROL_RETRACT_SWAP "Scamb. Ritrai mm"
#define MSG_CONTROL_RETRACTF "Ritrai V"
......@@ -158,11 +158,11 @@
#define MSG_RETRACT_XMM "Retract " STRINGIFY(LCD_RETRACT_LENGTH) "mm"
#ifdef DELTA
#define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
#define MSG_DELTA_CALIBRATE_Y "Calibrate Y"
#define MSG_DELTA_CALIBRATE_Z "Calibrate Z"
#define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center"
#define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
#define MSG_DELTA_CALIBRATE_Y "Calibrate Y"
#define MSG_DELTA_CALIBRATE_Z "Calibrate Z"
#define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center"
#endif // DELTA
#ifdef FIRMWARE_TEST
......
MarlinKimbra/planner.h
View file @ 52727590
......@@ -40,7 +40,7 @@ typedef struct {
long decelerate_after; // The index of the step event on which to start decelerating
long acceleration_rate; // The acceleration rate used for acceleration calculation
unsigned char direction_bits; // The direction bit set for this block (refers to *_DIRECTION_BIT in config.h)
unsigned char active_driver; // Selects the active driver
unsigned char active_driver; // Selects the active driver
#ifdef ADVANCE
long advance_rate;
volatile long initial_advance;
......
MarlinKimbra/ultralcd.cpp
View file @ 52727590
......@@ -203,7 +203,7 @@ static void lcd_goto_menu(menuFunc_t menu, const uint32_t encoder=0, const bool
if (feedback) lcd_quick_feedback();
// For LCD_PROGRESS_BAR re-initialize the custom characters
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) && !defined(DOGLCD)
lcd_set_custom_characters(menu == lcd_status_screen);
#endif
}
......@@ -212,7 +212,7 @@ static void lcd_goto_menu(menuFunc_t menu, const uint32_t encoder=0, const bool
/* Main status screen. It's up to the implementation specific part to show what is needed. As this is very display dependent */
static void lcd_status_screen()
{
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) && !defined(DOGLCD)
uint16_t mil = millis();
#ifndef PROGRESS_BAR_MSG_ONCE
if (mil > progressBarTick + PROGRESS_BAR_MSG_TIME + PROGRESS_BAR_BAR_TIME) {
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment