Skip to content

M
MarlinKimbra
Commit 4d02e2df authored by Franco (nextime) Lanza's avatar Franco (nextime) Lanza
Browse files
Options

Merge branch 'dev'

parents a219402a 107ecd74
Pipeline #113 skipped
Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 262 deletions
Documentation/Laser/K40_ramps_configs/K40_no_cooler_no_flowmeter/Configuration_Basic.h deleted 100644 → 0
View file @ a219402a
#ifndef CONFIGURATION_BASIC_H
#define CONFIGURATION_BASIC_H
/*
* This configuration file contains basic settings.
*
* - Serial comunication type
* - Board type
* - Mechanism type
* - Extruders number
* - Thermistor type
* - Temperature limits
*
* Mechanisms-settings can be found in Configuration_Xxxxxx.h (where Xxxxxx can be: Cartesian - Delta - Core - Scara)
* Feature-settings can be found in Configuration_Feature.h
* Pins-settings can be found in "Configuration_Pins.h"
*/
/***********************************************************************
********************** Serial comunication type ***********************
***********************************************************************/
// SERIAL PORT selects which serial port should be used for communication with the host.
// This allows the connection of wireless adapters (for instance) to non-default port pins.
// Serial port 0 is still used by the Arduino bootloader regardless of this setting.
#define SERIAL_PORT 0
// This determines the communication speed of the printer
// 2400,9600,19200,38400,57600,115200,250000
#define BAUDRATE 115200
// Enable the Bluetooth serial interface
//#define BLUETOOTH
#define BLUETOOTH_PORT 1
#define BLUETOOTH_BAUD 115200
// User-specified version info of this build to display in [Pronterface, etc] terminal window during
// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
// build by the user have been successfully uploaded into firmware.
#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
// Kill Method
// 0 - Disable heaters, wait forever
// 1 - Reset controller. Will not reset separate communication chips!
#define KILL_METHOD 0
// If you want test the firmware uncomment below. Use Serial arduino monitor...
// ONLY BAUDRATE 115200
//#define FIRMWARE_TEST
// Some particular clients re-start sending commands only after receiving a 'wait' when there is a bad serial-connection.
//#define NO_TIMEOUTS 1000 // Milliseconds
// Uncomment to include more info in ok command
//#define ADVANCED_OK
// By default MarlinKimbra will send a busy status message to the host
// every couple of seconds when it can't accept commands.
// Enable this option if your host doesn't like keepalive messages.
//#define DISABLE_HOST_KEEPALIVE
/***********************************************************************/
/*****************************************************************************************
*************************************** Board type **************************************
*****************************************************************************************
* *
* Either an numeric ID or name defined in boards.h is valid. *
* See: https://github.com/MagoKimbra/MarlinKimbra/blob/master/Documentation/Hardware.md *
* *
*****************************************************************************************/
#define MOTHERBOARD BOARD_RAMPS_13_HFB
/*****************************************************************************************/
/***********************************************************************
*************************** Mechanism type ****************************
***********************************************************************
* *
* CARTESIAN - Prusa, Mendel, etc *
* COREXY - H-Bot/Core XY (x_motor = x+y, y_motor = x-y) *
* COREYX - H-Bot/Core XY (x_motor = y+x, y_motor = y-x) *
* COREXZ - H-Bot/Core XZ (x_motor = x+z, z_motor = x-z) *
* COREZX - H-Bot/Core XZ (x_motor = z+x, z_motor = z-x) *
* DELTA - Rostock, Kossel, RostockMax, Cerberus, etc *
* SCARA - SCARA *
* *
***********************************************************************/
#define MECHANISM MECH_CARTESIAN
//#define MECHANISM MECH_COREXY
//#define MECHANISM MECH_COREYX
//#define MECHANISM MECH_COREXZ
//#define MECHANISM MECH_COREZX
//#define MECHANISM MECH_DELTA
//#define MECHANISM MECH_SCARA
/***********************************************************************/
/*************************************************************************************
************************************ Power supply ***********************************
*************************************************************************************
* *
* The following define selects which power supply you have. *
* Please choose the one that matches your setup and set to POWER_SUPPLY: *
* 0 Normal power *
* 1 ATX *
* 2 X-Box 360 203 Watts (the blue wire connected to PS_ON and the red wire to VCC) *
* *
*************************************************************************************/
#define POWER_SUPPLY 0
// Define this to have the electronics keep the power supply off on startup. If you don't know what this is leave it.
//#define PS_DEFAULT_OFF
/*************************************************************************************/
/***********************************************************************
******************************* Cooler ********************************
***********************************************************************
* *
* Uncomment the following line to enable COOLER support *
* *
***********************************************************************/
//#define COOLER
/***********************************************************************
************************** Extruders number ***************************
***********************************************************************/
// This defines the number of extruder real or virtual
#define EXTRUDERS 1
// This defines the number of Driver extruder you have and use
#define DRIVER_EXTRUDERS 1
/***********************************************************************/
/*****************************************************************************************************
************************************** Thermistor type **********************************************
*****************************************************************************************************
* *
* 4.7kohm PULLUP! *
* This is a normal value, if you use a 1k pullup thermistor see below *
* Please choose the one that matches your setup and set to TEMP_SENSOR_. *
* *
* Temperature sensor settings (4.7kohm PULLUP): *
* -2 is thermocouple with MAX6675 (only for sensor 0) *
* -1 is thermocouple with AD595 or AD597 *
* 0 is not used *
* 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup) *
* 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) *
* 3 is Mendel-parts thermistor (4.7k pullup) *
* 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! *
* 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup) *
* 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) *
* 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) *
* 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) *
* 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) *
* 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) *
* 10 is 100k RS thermistor 198-961 (4.7k pullup) *
* 11 is 100k beta 3950 1% thermistor (4.7k pullup) *
* 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) *
* 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" *
* 20 is the PT100 circuit found in the Ultimainboard V2.x *
* 40 is the 10k Carel NTC015WH01 or ELIWELL SN8T6A1502 (4.7k pullup) *
* 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 *
* *
* 1kohm PULLUP! *
* This is not normal, you would have to have changed out your 4.7k for 1k *
* (but gives greater accuracy and more stable PID) *
* Please choose the one that matches your setup. *
* *
* Temperature sensor settings (1kohm PULLUP): *
* 51 is 100k thermistor - EPCOS (1k pullup) *
* 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup) *
* 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) *
* *
* 1047 is Pt1000 with 4k7 pullup *
* 1010 is Pt1000 with 1k pullup (non standard) *
* 147 is Pt100 with 4k7 pullup *
* 110 is Pt100 with 1k pullup (non standard) *
* 998 and 999 are Dummy Tables. ALWAYS read 25°C or DUMMY_THERMISTOR_998_VALUE temperature *
* *
*****************************************************************************************************/
#define TEMP_SENSOR_0 0
#define TEMP_SENSOR_1 0
#define TEMP_SENSOR_2 0
#define TEMP_SENSOR_3 0
#define TEMP_SENSOR_BED 0
#define TEMP_SENSOR_COOLER 0
//These 2 defines help to calibrate the AD595 sensor in case you get wrong temperature measurements.
//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET"
#define TEMP_SENSOR_AD595_OFFSET 0.0
#define TEMP_SENSOR_AD595_GAIN 1.0
// Use it for Testing or Development purposes. NEVER for production machine.
#define DUMMY_THERMISTOR_998_VALUE 25
#define DUMMY_THERMISTOR_999_VALUE 25
//Show Temperature ADC value
//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
//#define SHOW_TEMP_ADC_VALUES
/*****************************************************************************************************/
/***********************************************************************
************************* Temperature limits ***************************
***********************************************************************/
// Hotend temperature must be close to target for this long before M109 returns success
#define TEMP_RESIDENCY_TIME 10 // (seconds)
#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one
#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early.
// Bed temperature must be close to target for this long before M190 returns success
#define TEMP_BED_RESIDENCY_TIME 0 // (seconds)
#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one
#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early.
// Cooler temperature must be close to target for this long before M190 returns success
#define TEMP_COOLER_RESIDENCY_TIME 0 // (seconds)
#define TEMP_COOLER_HYSTERESIS 1 // (degC) range of +/- temperatures considered "close" to the target one
#define TEMP_COOLER_WINDOW 1 // (degC) Window around target to start the residency timer x degC early.
// When temperature exceeds max temp, your heater will be switched off.
// When temperature exceeds max temp, your cooler cannot be activaed.
// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure!
// You should use MINTEMP for thermistor short/failure protection.
#define HEATER_0_MAXTEMP 275 // (degC)
#define HEATER_1_MAXTEMP 275 // (degC)
#define HEATER_2_MAXTEMP 275 // (degC)
#define HEATER_3_MAXTEMP 275 // (degC)
#define BED_MAXTEMP 150 // (degC)
#define COOLER_MAXTEMP 35 //
// The minimal temperature defines the temperature below which the heater will not be enabled It is used
// or, in case of cooler, it will switched off.
// to check that the wiring to the thermistor is not broken.
// Otherwise this would lead to the heater being powered on all the time.
#define HEATER_0_MINTEMP 5 // (degC)
#define HEATER_1_MINTEMP 5 // (degC)
#define HEATER_2_MINTEMP 5 // (degC)
#define HEATER_3_MINTEMP 5 // (degC)
#define BED_MINTEMP 5 // (degC)
#define COOLER_MINTEMP 10 // (degC)
//Preheat Constants
#define PLA_PREHEAT_HOTEND_TEMP 190
#define PLA_PREHEAT_HPB_TEMP 60
#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
#define ABS_PREHEAT_HOTEND_TEMP 240
#define ABS_PREHEAT_HPB_TEMP 100
#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
#define GUM_PREHEAT_HOTEND_TEMP 230
#define GUM_PREHEAT_HPB_TEMP 60
#define GUM_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
/*****************************************************************************************************/
#endif
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment