Add SainSmart 2in1

MK/Boards.h

@@ -17,6 +17,7 @@
 *  35 BOARD_RAMPS_13_HFF - RAMPS 1.3 / 1.4 (Power outputs: Hotend0, Fan, Fan)
 *  36 BOARD_RAMPS_13_HHF - RAMPS 1.3 / 1.4 (Power outputs: Hotend0, Hotend1, Fan)
 *  37 BOARD_RAMPS_13_HHH - RAMPS 1.3 / 1.4 (Power outputs: Hotend0, Hotend1, Hotend2)
+*  39 BOARD_SAINSMART_2IN1 - SainSmart 2 in 1
 * 301 BOARD_RAMBO - Rambo
 * 302 BOARD_MINIRAMBO - Mini Rambo
 * 316 BOARD_PIBOT - PiBot Controller Rev2.0 
@@ -92,6 +93,7 @@
 #define BOARD_RAMPS_13_HFF      35    // RAMPS 1.3 / 1.4 (Power outputs: Hotend, Fan, Fan)
 #define BOARD_RAMPS_13_HHF      36    // RAMPS 1.3 / 1.4 (Power outputs: Hotend0, Hotend1, Fan)
 #define BOARD_RAMPS_13_HHH      37    // RAMPS 1.3 / 1.4 (Power outputs: Hotend0, Hotend1, Hotend2)
+#define BOARD_SAINSMART_2IN1    39    // SainSmart 2 in 1
 #define BOARD_RAMBO             301   // Rambo
 #define BOARD_MINIRAMBO         302   // Mini-Rambo
 #define BOARD_PIBOT             316   // PiBot Controller Rev2.0

MK/module/boards/39.h

+/****************************************************************************************
+* 39
+* SAINSMART 2 IN 1
+****************************************************************************************/
+
+#define KNOWN_BOARD
+
+#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
+  #error Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
+#endif
+
+#define LARGE_FLASH true
+
+// X axis pins
+#define ORIG_X_STEP_PIN         54
+#define ORIG_X_DIR_PIN          55
+#define ORIG_X_ENABLE_PIN       38
+#define ORIG_X_MIN_PIN          3
+#define ORIG_X_MAX_PIN          2
+
+// Y axis pins
+#define ORIG_Y_STEP_PIN         60
+#define ORIG_Y_DIR_PIN          61
+#define ORIG_Y_ENABLE_PIN       56
+#define ORIG_Y_MIN_PIN          14
+#define ORIG_Y_MAX_PIN          15
+
+#define Y2_STEP_PIN             36
+#define Y2_DIR_PIN              34
+#define Y2_ENABLE_PIN           30
+
+// Z axis pins
+#define ORIG_Z_STEP_PIN         46
+#define ORIG_Z_DIR_PIN          48
+#define ORIG_Z_ENABLE_PIN       62
+#define ORIG_Z_MIN_PIN          18
+#define ORIG_Z_MAX_PIN          19
+
+#define Z2_STEP_PIN             36
+#define Z2_DIR_PIN              34
+#define Z2_ENABLE_PIN           30
+
+// E axis pins
+#define ORIG_E0_STEP_PIN        26
+#define ORIG_E0_DIR_PIN         28
+#define ORIG_E0_ENABLE_PIN      24
+
+#define ORIG_E1_STEP_PIN        36
+#define ORIG_E1_DIR_PIN         34
+#define ORIG_E1_ENABLE_PIN      30
+
+#define ORIG_E2_STEP_PIN        64
+#define ORIG_E2_DIR_PIN         59
+#define ORIG_E2_ENABLE_PIN      44
+
+#define ORIG_E3_STEP_PIN        40
+#define ORIG_E3_DIR_PIN         63
+#define ORIG_E3_ENABLE_PIN      42
+
+#define SDPOWER                 -1
+#define SDSS                    53
+#define LED_PIN                 13
+
+#define ORIG_FAN_PIN             7
+#define ORIG_PS_ON_PIN          12
+
+#define ORIG_HEATER_0_PIN        9
+#define ORIG_HEATER_1_PIN       -1
+#define ORIG_HEATER_2_PIN       -1
+#define ORIG_HEATER_3_PIN       -1
+
+#define ORIG_TEMP_0_PIN         13  // ANALOG NUMBERING
+#define ORIG_TEMP_1_PIN         15  // ANALOG NUMBERING
+#define ORIG_TEMP_2_PIN         -1  // ANALOG NUMBERING
+#define ORIG_TEMP_3_PIN         -1  // ANALOG NUMBERING
+
+#define ORIG_HEATER_BED_PIN      8  // BED
+#define ORIG_TEMP_BED_PIN       14  // ANALOG NUMBERING
+
+#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) || ENABLED(G3D_PANEL)
+  #define KILL_PIN              41
+#else
+  #define KILL_PIN              -1
+#endif
+
+#if NUM_SERVOS > 0
+  #define SERVO0_PIN            11
+  #if NUM_SERVOS > 1
+    #define SERVO1_PIN          6
+    #if NUM_SERVOS > 2
+      #define SERVO2_PIN        5
+      #if NUM_SERVOS > 3
+        #define SERVO3_PIN      4
+      #endif
+    #endif
+  #endif
+#endif
+
+#if ENABLED(ULTRA_LCD)
+  #if ENABLED(NEWPANEL)
+    #if ENABLED(PANEL_ONE)
+      #define LCD_PINS_RS       40
+      #define LCD_PINS_ENABLE   42
+      #define LCD_PINS_D4       65
+      #define LCD_PINS_D5       66
+      #define LCD_PINS_D6       44
+      #define LCD_PINS_D7       64
+    #else
+      #define LCD_PINS_RS       16
+      #define LCD_PINS_ENABLE   17
+      #define LCD_PINS_D4       23
+      #define LCD_PINS_D5       25
+      #define LCD_PINS_D6       27
+      #define LCD_PINS_D7       29
+    #endif // PANEL_ONE
+
+    #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
+      #define ORIG_BEEPER_PIN   37
+
+      #define BTN_EN1           31
+      #define BTN_EN2           33
+      #define BTN_ENC           35
+
+      #define SD_DETECT_PIN     49
+    #elif ENABLED(LCD_I2C_PANELOLU2)
+      #define BTN_EN1           47  // reverse if the encoder turns the wrong way.
+      #define BTN_EN2           43
+      #define BTN_ENC           32
+      #define LCD_SDSS          53
+      #define SD_DETECT_PIN     -1
+      #define KILL_PIN          41
+    #elif ENABLED(LCD_I2C_VIKI)
+      #define BTN_EN1           22  // reverse if the encoder turns the wrong way.
+      #define BTN_EN2           7
+      #define BTN_ENC           -1
+      #define LCD_SDSS          53
+      #define SD_DETECT_PIN     49
+    #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
+      #define BTN_EN1           35  // reverse if the encoder turns the wrong way.
+      #define BTN_EN2           37
+      #define BTN_ENC           31
+      #define SD_DETECT_PIN     49
+      #define LCD_SDSS          53
+      #define KILL_PIN          41
+      #define ORIG_BEEPER_PIN   23
+      #define DOGLCD_CS         29
+      #define DOGLCD_A0         27
+      #define LCD_PIN_BL        33
+    #else
+      // arduino pin which triggers an piezzo beeper
+      #define ORIG_BEEPER_PIN   33  // Beeper on AUX-4
+
+      // buttons are directly attached using AUX-2
+      #if ENABLED(REPRAPWORLD_KEYPAD)
+        #define BTN_EN1         64  // encoder
+        #define BTN_EN2         59  // encoder
+        #define BTN_ENC         63  // enter button
+        #define SHIFT_OUT       40  // shift register
+        #define SHIFT_CLK       44  // shift register
+        #define SHIFT_LD        42  // shift register
+      #elif ENABLED(PANEL_ONE)
+        #define BTN_EN1         59  // AUX2 PIN 3
+        #define BTN_EN2         63  // AUX2 PIN 4
+        #define BTN_ENC         49  // AUX3 PIN 7
+      #else
+        #define BTN_EN1         37
+        #define BTN_EN2         35
+        #define BTN_ENC         31  // the click
+      #endif
+
+      #if ENABLED(G3D_PANEL)
+        #define SD_DETECT_PIN   49
+      #else
+        #define SD_DETECT_PIN   -1  // Ramps does not use this port
+      #endif
+
+    #endif
+
+  #else // old style panel with shift register
+    // arduino pin witch triggers an piezo beeper
+    #define ORIG_BEEPER_PIN     33  // No Beeper added
+
+    //buttons are attached to a shift register
+    // Not wired this yet
+    //#define SHIFT_CLK         38
+    //#define SHIFT_LD          42
+    //#define SHIFT_OUT         40
+    //#define SHIFT_EN          17
+
+    #define LCD_PINS_RS         16
+    #define LCD_PINS_ENABLE     17
+    #define LCD_PINS_D4         23
+    #define LCD_PINS_D5         25
+    #define LCD_PINS_D6         27
+    #define LCD_PINS_D7         29
+  #endif // NEWPANEL
+#endif // ULTRA_LCD
+
+// SPI for Max6675 Thermocouple
+#define MAX6675_SS              66  // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present