Skip to content

M
MarlinKimbra
Commit 296d8557 authored by MagoKimbra's avatar MagoKimbra
Browse files
Options

Update Language

parent 4fa8148a
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 303 additions and 192 deletions
MarlinKimbra/Configuration.h
View file @ 296d8557
...@@ -520,6 +520,7 @@ your extruder heater takes 2 minutes to hit the target on heating. ...@@ -520,6 +520,7 @@ your extruder heater takes 2 minutes to hit the target on heating.
// 11 Dutch // 11 Dutch
// 12 Catalan // 12 Catalan
// 13 Basque-Euskera // 13 Basque-Euskera
// 14 Portuguese (Brazil)
#define LANGUAGE_CHOICE 7 #define LANGUAGE_CHOICE 7
......
MarlinKimbra/language.h
View file @ 296d8557
...@@ -7,7 +7,7 @@ ...@@ -7,7 +7,7 @@
// ==> ALSO TRY ALL AVAILABLE "LANGUAGE_CHOICE" OPTIONS // ==> ALSO TRY ALL AVAILABLE "LANGUAGE_CHOICE" OPTIONS
// Languages // Languages
// 1 English standard // 1 English
// 2 Polish // 2 Polish
// 3 French // 3 French
// 4 German // 4 German
...@@ -209,9 +209,9 @@ ...@@ -209,9 +209,9 @@
#define TESTSTRING360 "\360\361\362\363\364\365\366\367\370\371\372\373\374\375\376\377" #define TESTSTRING360 "\360\361\362\363\364\365\366\367\370\371\372\373\374\375\376\377"
*/ */
#include "language_en.h" #if LANGUAGE_CHOICE == 1 // English
#include "language_en.h"
#if LANGUAGE_CHOICE == 2 // Polish #elif LANGUAGE_CHOICE == 2 // Polish
#include "language_pl.h" #include "language_pl.h"
#elif LANGUAGE_CHOICE == 3 // French #elif LANGUAGE_CHOICE == 3 // French
#include "language_fr.h" #include "language_fr.h"
......
MarlinKimbra/language_de.h
View file @ 296d8557
...@@ -139,20 +139,20 @@ ...@@ -139,20 +139,20 @@
#define MSG_RETRACT_XMM "Retract " STRINGIFY(LCD_RETRACT_LENGTH) "mm" #define MSG_RETRACT_XMM "Retract " STRINGIFY(LCD_RETRACT_LENGTH) "mm"
#ifdef FIRMWARE_TEST #ifdef FIRMWARE_TEST
#define MSG_FWTEST_YES "Put the Y command to go next" #define MSG_FWTEST_YES "Put the Y command to go next"
#define MSG_FWTEST_NO "Put the N command to go next" #define MSG_FWTEST_NO "Put the N command to go next"
#define MSG_FWTEST_YES_NO "Put the Y or N command to go next" #define MSG_FWTEST_YES_NO "Put the Y or N command to go next"
#define MSG_FWTEST_ENDSTOP_ERR "ENDSTOP ERROR! Check wire and connection" #define MSG_FWTEST_ENDSTOP_ERR "ENDSTOP ERROR! Check wire and connection"
#define MSG_FWTEST_PRESS "Press and hold the endstop " #define MSG_FWTEST_PRESS "Press and hold the endstop "
#define MSG_FWTEST_INVERT "Reverse value in " #define MSG_FWTEST_INVERT "Reverse value in "
#define MSG_FWTEST_XAXIS "Has the nozzle moved to the right?" #define MSG_FWTEST_XAXIS "Has the nozzle moved to the right?"
#define MSG_FWTEST_YAXIS "Has the nozzle moved forward?" #define MSG_FWTEST_YAXIS "Has the nozzle moved forward?"
#define MSG_FWTEST_ZAXIS "Has the nozzle moved up?" #define MSG_FWTEST_ZAXIS "Has the nozzle moved up?"
#define MSG_FWTEST_01 "Manually move the axes X, Y and Z away from the endstop" #define MSG_FWTEST_01 "Manually move the axes X, Y and Z away from the endstop"
#define MSG_FWTEST_02 "Do you want check ENDSTOP?" #define MSG_FWTEST_02 "Do you want check ENDSTOP?"
#define MSG_FWTEST_03 "Start check ENDSTOP" #define MSG_FWTEST_03 "Start check ENDSTOP"
#define MSG_FWTEST_04 "Start check MOTOR" #define MSG_FWTEST_04 "Start check MOTOR"
#define MSG_FWTEST_ATTENTION "ATTENTION! Check that the three axes are more than 5 mm from the endstop!" #define MSG_FWTEST_ATTENTION "ATTENTION! Check that the three axes are more than 5 mm from the endstop!"
#endif // FIRMWARE_TEST #endif // FIRMWARE_TEST
#endif // LANGUAGE_DE_H #endif // LANGUAGE_DE_H
MarlinKimbra/language_en.h
View file @ 296d8557
...@@ -81,7 +81,7 @@ ...@@ -81,7 +81,7 @@
#define MSG_TEMPERATURE "Temperature" #define MSG_TEMPERATURE "Temperature"
#define MSG_MOTION "Motion" #define MSG_MOTION "Motion"
#define MSG_VOLUMETRIC "Filament" #define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm" STR_h3 #define MSG_VOLUMETRIC_ENABLED "E in mm" STR_h3
#define MSG_FILAMENT_SIZE_EXTRUDER "Fil. Dia." #define MSG_FILAMENT_SIZE_EXTRUDER "Fil. Dia."
#define MSG_CONTRAST "LCD contrast" #define MSG_CONTRAST "LCD contrast"
#define MSG_STORE_EPROM "Store memory" #define MSG_STORE_EPROM "Store memory"
......
MarlinKimbra/language_es.h
View file @ 296d8557
...@@ -49,20 +49,20 @@ ...@@ -49,20 +49,20 @@
#define MSG_FAN_SPEED "Ventilador" #define MSG_FAN_SPEED "Ventilador"
#define MSG_FLOW "Flujo" #define MSG_FLOW "Flujo"
#define MSG_CONTROL "Control" #define MSG_CONTROL "Control"
#define MSG_MIN "\002 Min" #define MSG_MIN " " STR_THERMOMETER " Min"
#define MSG_MAX "\002 Max" #define MSG_MAX " " STR_THERMOMETER " Max"
#define MSG_FACTOR "\002 Fact" #define MSG_FACTOR " " STR_THERMOMETER " Fact"
#define MSG_AUTOTEMP "Autotemp" #define MSG_AUTOTEMP "Autotemp"
#define MSG_ON "On" #define MSG_ON "On "
#define MSG_OFF "Off" #define MSG_OFF "Off"
#define MSG_PID_P "PID-P" #define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I" #define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D" #define MSG_PID_D "PID-D"
#define MSG_ACC "Acel" #define MSG_ACC "Accel"
#define MSG_VXY_JERK "Vxy-jerk" #define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk" #define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk" #define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX "Vmax" #define MSG_VMAX "Vmax "
#define MSG_X "x" #define MSG_X "x"
#define MSG_Y "y" #define MSG_Y "y"
#define MSG_Z "z" #define MSG_Z "z"
...@@ -81,7 +81,7 @@ ...@@ -81,7 +81,7 @@
#define MSG_TEMPERATURE "Temperatura" #define MSG_TEMPERATURE "Temperatura"
#define MSG_MOTION "Movimiento" #define MSG_MOTION "Movimiento"
#define MSG_VOLUMETRIC "Filament" #define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm3" #define MSG_VOLUMETRIC_ENABLED "E in mm" STR_h3
#define MSG_FILAMENT_SIZE_EXTRUDER "Fil. Dia." #define MSG_FILAMENT_SIZE_EXTRUDER "Fil. Dia."
#define MSG_CONTRAST "Contraste" #define MSG_CONTRAST "Contraste"
#define MSG_STORE_EPROM "Guardar memoria" #define MSG_STORE_EPROM "Guardar memoria"
...@@ -139,20 +139,20 @@ ...@@ -139,20 +139,20 @@
#define MSG_RETRACT_XMM "Retract " STRINGIFY(LCD_RETRACT_LENGTH) "mm" #define MSG_RETRACT_XMM "Retract " STRINGIFY(LCD_RETRACT_LENGTH) "mm"
#ifdef FIRMWARE_TEST #ifdef FIRMWARE_TEST
#define MSG_FWTEST_YES "Put the Y command to go next" #define MSG_FWTEST_YES "Put the Y command to go next"
#define MSG_FWTEST_NO "Put the N command to go next" #define MSG_FWTEST_NO "Put the N command to go next"
#define MSG_FWTEST_YES_NO "Put the Y or N command to go next" #define MSG_FWTEST_YES_NO "Put the Y or N command to go next"
#define MSG_FWTEST_ENDSTOP_ERR "ENDSTOP ERROR! Check wire and connection" #define MSG_FWTEST_ENDSTOP_ERR "ENDSTOP ERROR! Check wire and connection"
#define MSG_FWTEST_PRESS "Press and hold the endstop " #define MSG_FWTEST_PRESS "Press and hold the endstop "
#define MSG_FWTEST_INVERT "Reverse value in " #define MSG_FWTEST_INVERT "Reverse value in "
#define MSG_FWTEST_XAXIS "Has the nozzle moved to the right?" #define MSG_FWTEST_XAXIS "Has the nozzle moved to the right?"
#define MSG_FWTEST_YAXIS "Has the nozzle moved forward?" #define MSG_FWTEST_YAXIS "Has the nozzle moved forward?"
#define MSG_FWTEST_ZAXIS "Has the nozzle moved up?" #define MSG_FWTEST_ZAXIS "Has the nozzle moved up?"
#define MSG_FWTEST_01 "Manually move the axes X, Y and Z away from the endstop" #define MSG_FWTEST_01 "Manually move the axes X, Y and Z away from the endstop"
#define MSG_FWTEST_02 "Do you want check ENDSTOP?" #define MSG_FWTEST_02 "Do you want check ENDSTOP?"
#define MSG_FWTEST_03 "Start check ENDSTOP" #define MSG_FWTEST_03 "Start check ENDSTOP"
#define MSG_FWTEST_04 "Start check MOTOR" #define MSG_FWTEST_04 "Start check MOTOR"
#define MSG_FWTEST_ATTENTION "ATTENTION! Check that the three axes are more than 5 mm from the endstop!" #define MSG_FWTEST_ATTENTION "ATTENTION! Check that the three axes are more than 5 mm from the endstop!"
#endif // FIRMWARE_TEST #endif // FIRMWARE_TEST
#endif // LANGUAGE_ES_H #endif // LANGUAGE_ES_H
MarlinKimbra/language_eu.h
View file @ 296d8557
...@@ -15,6 +15,7 @@ ...@@ -15,6 +15,7 @@
#define MSG_AUTOSTART "Auto hasiera" #define MSG_AUTOSTART "Auto hasiera"
#define MSG_DISABLE_STEPPERS "Itzali motoreak" #define MSG_DISABLE_STEPPERS "Itzali motoreak"
#define MSG_AUTO_HOME "Hasierara joan" #define MSG_AUTO_HOME "Hasierara joan"
#define MSG_BED_SETTING "Bed Setting"
#define MSG_SET_HOME_OFFSETS "Set home offsets" #define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Hasiera ipini" #define MSG_SET_ORIGIN "Hasiera ipini"
#define MSG_PREHEAT_PLA "Aurreberotu PLA" #define MSG_PREHEAT_PLA "Aurreberotu PLA"
...@@ -48,9 +49,9 @@ ...@@ -48,9 +49,9 @@
#define MSG_FAN_SPEED "Haizagailua" #define MSG_FAN_SPEED "Haizagailua"
#define MSG_FLOW "Fluxua" #define MSG_FLOW "Fluxua"
#define MSG_CONTROL "Kontrola" #define MSG_CONTROL "Kontrola"
#define MSG_MIN " \002 Min" #define MSG_MIN " " STR_THERMOMETER " Min"
#define MSG_MAX " \002 Max" #define MSG_MAX " " STR_THERMOMETER " Max"
#define MSG_FACTOR " \002 Faktorea" #define MSG_FACTOR " " STR_THERMOMETER " Fact"
#define MSG_AUTOTEMP "Auto tenperatura" #define MSG_AUTOTEMP "Auto tenperatura"
#define MSG_ON "On " #define MSG_ON "On "
#define MSG_OFF "Off" #define MSG_OFF "Off"
...@@ -80,7 +81,7 @@ ...@@ -80,7 +81,7 @@
#define MSG_TEMPERATURE "Tenperatura" #define MSG_TEMPERATURE "Tenperatura"
#define MSG_MOTION "Mugimendua" #define MSG_MOTION "Mugimendua"
#define MSG_VOLUMETRIC "Filament" #define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm3" #define MSG_VOLUMETRIC_ENABLED "E in mm" STR_h3
#define MSG_FILAMENT_SIZE_EXTRUDER "Fil. Dia." #define MSG_FILAMENT_SIZE_EXTRUDER "Fil. Dia."
#define MSG_CONTRAST "LCD kontrastea" #define MSG_CONTRAST "LCD kontrastea"
#define MSG_STORE_EPROM "Gorde memoria" #define MSG_STORE_EPROM "Gorde memoria"
......
MarlinKimbra/language_fi.h
View file @ 296d8557
...@@ -15,6 +15,7 @@ ...@@ -15,6 +15,7 @@
#define MSG_AUTOSTART "Automaatti" #define MSG_AUTOSTART "Automaatti"
#define MSG_DISABLE_STEPPERS "Vapauta moottorit" #define MSG_DISABLE_STEPPERS "Vapauta moottorit"
#define MSG_AUTO_HOME "Aja referenssiin" #define MSG_AUTO_HOME "Aja referenssiin"
#define MSG_BED_SETTING "Bed Setting"
#define MSG_SET_HOME_OFFSETS "Set home offsets" #define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Aseta origo" #define MSG_SET_ORIGIN "Aseta origo"
#define MSG_PREHEAT_PLA "Esilammita PLA" #define MSG_PREHEAT_PLA "Esilammita PLA"
...@@ -48,9 +49,9 @@ ...@@ -48,9 +49,9 @@
#define MSG_FAN_SPEED "Tuul. nopeus" #define MSG_FAN_SPEED "Tuul. nopeus"
#define MSG_FLOW "Virtaus" #define MSG_FLOW "Virtaus"
#define MSG_CONTROL "Kontrolli" #define MSG_CONTROL "Kontrolli"
#define MSG_MIN " \002 Min" #define MSG_MIN " " STR_THERMOMETER " Min"
#define MSG_MAX " \002 Max" #define MSG_MAX " " STR_THERMOMETER " Max"
#define MSG_FACTOR " \002 Kerr" #define MSG_FACTOR " " STR_THERMOMETER " Fact"
#define MSG_AUTOTEMP "Autotemp" #define MSG_AUTOTEMP "Autotemp"
#define MSG_ON "On " #define MSG_ON "On "
#define MSG_OFF "Off" #define MSG_OFF "Off"
...@@ -80,7 +81,7 @@ ...@@ -80,7 +81,7 @@
#define MSG_TEMPERATURE "Lampotila" #define MSG_TEMPERATURE "Lampotila"
#define MSG_MOTION "Liike" #define MSG_MOTION "Liike"
#define MSG_VOLUMETRIC "Filament" #define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm3" #define MSG_VOLUMETRIC_ENABLED "E in mm" STR_h3
#define MSG_FILAMENT_SIZE_EXTRUDER "Fil. Dia." #define MSG_FILAMENT_SIZE_EXTRUDER "Fil. Dia."
#define MSG_CONTRAST "LCD contrast" #define MSG_CONTRAST "LCD contrast"
#define MSG_STORE_EPROM "Tallenna muistiin" #define MSG_STORE_EPROM "Tallenna muistiin"
......
MarlinKimbra/language_fr.h
View file @ 296d8557
...@@ -15,6 +15,7 @@ ...@@ -15,6 +15,7 @@
#define MSG_AUTOSTART "Demarrage auto" #define MSG_AUTOSTART "Demarrage auto"
#define MSG_DISABLE_STEPPERS "Arreter moteurs" #define MSG_DISABLE_STEPPERS "Arreter moteurs"
#define MSG_AUTO_HOME "Home auto." #define MSG_AUTO_HOME "Home auto."
#define MSG_BED_SETTING "Bed Setting"
#define MSG_SET_HOME_OFFSETS "Set home offsets" #define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Regler origine" #define MSG_SET_ORIGIN "Regler origine"
#define MSG_PREHEAT_PLA "Prechauffage PLA" #define MSG_PREHEAT_PLA "Prechauffage PLA"
...@@ -48,9 +49,9 @@ ...@@ -48,9 +49,9 @@
#define MSG_FAN_SPEED "Vite. ventilateur" #define MSG_FAN_SPEED "Vite. ventilateur"
#define MSG_FLOW "Flux" #define MSG_FLOW "Flux"
#define MSG_CONTROL "Controler" #define MSG_CONTROL "Controler"
#define MSG_MIN " \002 Min" #define MSG_MIN " " STR_THERMOMETER " Min"
#define MSG_MAX " \002 Max" #define MSG_MAX " " STR_THERMOMETER " Max"
#define MSG_FACTOR " \002 Facteur" #define MSG_FACTOR " " STR_THERMOMETER " Fact"
#define MSG_AUTOTEMP "Temp. Auto." #define MSG_AUTOTEMP "Temp. Auto."
#define MSG_ON "Marche " #define MSG_ON "Marche "
#define MSG_OFF "Arret" #define MSG_OFF "Arret"
...@@ -80,7 +81,7 @@ ...@@ -80,7 +81,7 @@
#define MSG_TEMPERATURE "Temperature" #define MSG_TEMPERATURE "Temperature"
#define MSG_MOTION "Mouvement" #define MSG_MOTION "Mouvement"
#define MSG_VOLUMETRIC "Filament" #define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm3" #define MSG_VOLUMETRIC_ENABLED "E in mm" STR_h3
#define MSG_FILAMENT_SIZE_EXTRUDER "Fil. Dia." #define MSG_FILAMENT_SIZE_EXTRUDER "Fil. Dia."
#define MSG_CONTRAST "Contraste LCD" #define MSG_CONTRAST "Contraste LCD"
#define MSG_STORE_EPROM "Sauver config" #define MSG_STORE_EPROM "Sauver config"
......
MarlinKimbra/language_it.h
View file @ 296d8557
...@@ -81,7 +81,7 @@ ...@@ -81,7 +81,7 @@
#define MSG_TEMPERATURE "Temperatura" #define MSG_TEMPERATURE "Temperatura"
#define MSG_MOTION "Movimento" #define MSG_MOTION "Movimento"
#define MSG_VOLUMETRIC "Filamento" #define MSG_VOLUMETRIC "Filamento"
#define MSG_VOLUMETRIC_ENABLED "E in mm" STR_h3 #define MSG_VOLUMETRIC_ENABLED "E in mm" STR_h3
#define MSG_FILAMENT_SIZE_EXTRUDER "Diam. filo" #define MSG_FILAMENT_SIZE_EXTRUDER "Diam. filo"
#define MSG_CONTRAST "Contrasto LCD" #define MSG_CONTRAST "Contrasto LCD"
#define MSG_STORE_EPROM "Salva in EEPROM" #define MSG_STORE_EPROM "Salva in EEPROM"
......
MarlinKimbra/language_nl.h
View file @ 296d8557
...@@ -15,6 +15,7 @@ ...@@ -15,6 +15,7 @@
#define MSG_AUTOSTART "Autostart" #define MSG_AUTOSTART "Autostart"
#define MSG_DISABLE_STEPPERS "Motoren uit" #define MSG_DISABLE_STEPPERS "Motoren uit"
#define MSG_AUTO_HOME "Auto home" #define MSG_AUTO_HOME "Auto home"
#define MSG_BED_SETTING "Bed Setting"
#define MSG_SET_HOME_OFFSETS "Set home offsets" #define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Nulpunt instellen" #define MSG_SET_ORIGIN "Nulpunt instellen"
#define MSG_PREHEAT_PLA "PLA voorverwarmen" #define MSG_PREHEAT_PLA "PLA voorverwarmen"
...@@ -48,9 +49,9 @@ ...@@ -48,9 +49,9 @@
#define MSG_FAN_SPEED "Fan snelheid" #define MSG_FAN_SPEED "Fan snelheid"
#define MSG_FLOW "Flow" #define MSG_FLOW "Flow"
#define MSG_CONTROL "Control" #define MSG_CONTROL "Control"
#define MSG_MIN " \002 Min" #define MSG_MIN " " STR_THERMOMETER " Min"
#define MSG_MAX " \002 Max" #define MSG_MAX " " STR_THERMOMETER " Max"
#define MSG_FACTOR " \002 Fact" #define MSG_FACTOR " " STR_THERMOMETER " Fact"
#define MSG_AUTOTEMP "Autotemp" #define MSG_AUTOTEMP "Autotemp"
#define MSG_ON "Aan " #define MSG_ON "Aan "
#define MSG_OFF "Uit" #define MSG_OFF "Uit"
...@@ -80,7 +81,7 @@ ...@@ -80,7 +81,7 @@
#define MSG_TEMPERATURE "Temperatuur" #define MSG_TEMPERATURE "Temperatuur"
#define MSG_MOTION "Beweging" #define MSG_MOTION "Beweging"
#define MSG_VOLUMETRIC "Filament" #define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm3" #define MSG_VOLUMETRIC_ENABLED "E in mm" STR_h3
#define MSG_FILAMENT_SIZE_EXTRUDER "Fil. Dia." #define MSG_FILAMENT_SIZE_EXTRUDER "Fil. Dia."
#define MSG_CONTRAST "LCD contrast" #define MSG_CONTRAST "LCD contrast"
#define MSG_STORE_EPROM "Geheugen opslaan" #define MSG_STORE_EPROM "Geheugen opslaan"
......
MarlinKimbra/language_pl.h
View file @ 296d8557
...@@ -15,22 +15,21 @@ ...@@ -15,22 +15,21 @@
#define MSG_AUTOSTART "Autostart" #define MSG_AUTOSTART "Autostart"
#define MSG_DISABLE_STEPPERS "Wylacz silniki" #define MSG_DISABLE_STEPPERS "Wylacz silniki"
#define MSG_AUTO_HOME "Auto. poz. zerowa" #define MSG_AUTO_HOME "Auto. poz. zerowa"
#define MSG_BED_SETTING "Bed Setting"
#define MSG_SET_HOME_OFFSETS "Set home offsets" #define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Ustaw punkt zero" #define MSG_SET_ORIGIN "Ustaw punkt zero"
#define MSG_PREHEAT_PLA "Rozgrzej PLA" #define MSG_PREHEAT_PLA "Rozgrzej PLA"
#define MSG_PREHEAT_PLA0 "Rozgrzej PLA 1" #define MSG_PREHEAT_PLA_ALL "Roz. PLA Wszystko"
#define MSG_PREHEAT_PLA1 "Rozgrzej PLA 2"
#define MSG_PREHEAT_PLA2 "Rozgrzej PLA 3"
#define MSG_PREHEAT_PLA012 "Roz. PLA Wszystko"
#define MSG_PREHEAT_PLA_BEDONLY "Rozgrzej PLA Loze" #define MSG_PREHEAT_PLA_BEDONLY "Rozgrzej PLA Loze"
#define MSG_PREHEAT_PLA_SETTINGS "Ustaw. rozg. PLA" #define MSG_PREHEAT_PLA_SETTINGS "Ustaw. rozg. PLA"
#define MSG_PREHEAT_ABS "Rozgrzej ABS" #define MSG_PREHEAT_ABS "Rozgrzej ABS"
#define MSG_PREHEAT_ABS0 "Rozgrzej ABS 1" #define MSG_PREHEAT_ABS_ALL "Roz. ABS Wszystko"
#define MSG_PREHEAT_ABS1 "Rozgrzej ABS 2"
#define MSG_PREHEAT_ABS2 "Rozgrzej ABS 3"
#define MSG_PREHEAT_ABS012 "Roz. ABS Wszystko"
#define MSG_PREHEAT_ABS_BEDONLY "Rozgrzej ABS Loze" #define MSG_PREHEAT_ABS_BEDONLY "Rozgrzej ABS Loze"
#define MSG_PREHEAT_ABS_SETTINGS "Ustaw. rozg. ABS" #define MSG_PREHEAT_ABS_SETTINGS "Ustaw. rozg. ABS"
#define MSG_PREHEAT_GUM "Preheat GUM"
#define MSG_PREHEAT_GUM_ALL "Preheat GUM All"
#define MSG_PREHEAT_GUM_BEDONLY "Preheat GUM Bed"
#define MSG_PREHEAT_GUM_SETTINGS "Preheat GUM conf"
#define MSG_COOLDOWN "Chlodzenie" #define MSG_COOLDOWN "Chlodzenie"
#define MSG_SWITCH_PS_ON "Wlacz zasilacz" #define MSG_SWITCH_PS_ON "Wlacz zasilacz"
#define MSG_SWITCH_PS_OFF "Wylacz zasilacz" #define MSG_SWITCH_PS_OFF "Wylacz zasilacz"
...@@ -40,33 +39,25 @@ ...@@ -40,33 +39,25 @@
#define MSG_MOVE_X "Przesun w X" #define MSG_MOVE_X "Przesun w X"
#define MSG_MOVE_Y "Przesun w Y" #define MSG_MOVE_Y "Przesun w Y"
#define MSG_MOVE_Z "Przesun w Z" #define MSG_MOVE_Z "Przesun w Z"
#define MSG_MOVE_E "Ekstruzja (os E)" #define MSG_MOVE_E "Ekstruzja"
#define MSG_MOVE_E1 "Extruder2"
#define MSG_MOVE_E2 "Extruder3"
#define MSG_MOVE_01MM "Przesuwaj co .1mm" #define MSG_MOVE_01MM "Przesuwaj co .1mm"
#define MSG_MOVE_1MM "Przesuwaj co 1mm" #define MSG_MOVE_1MM "Przesuwaj co 1mm"
#define MSG_MOVE_10MM "Przesuwaj co 10mm" #define MSG_MOVE_10MM "Przesuwaj co 10mm"
#define MSG_SPEED "Predkosc" #define MSG_SPEED "Predkosc"
#define MSG_NOZZLE "Dysza" #define MSG_NOZZLE "Dysza"
#define MSG_NOZZLE1 "Dysza 2"
#define MSG_NOZZLE2 "Dysza 3"
#define MSG_BED "Loze" #define MSG_BED "Loze"
#define MSG_FAN_SPEED "Obroty wiatraka" #define MSG_FAN_SPEED "Obroty wiatraka"
#define MSG_FLOW "Przeplyw" #define MSG_FLOW "Przeplyw"
#define MSG_FLOW0 "Przeplyw 0"
#define MSG_FLOW1 "Przeplyw 1"
#define MSG_FLOW2 "Przeplyw 2"
#define MSG_CONTROL "Ustawienia" #define MSG_CONTROL "Ustawienia"
#define MSG_MIN " \002 Min" #define MSG_MIN " " STR_THERMOMETER " Min"
#define MSG_MAX " \002 Max" #define MSG_MAX " " STR_THERMOMETER " Max"
#define MSG_FACTOR " \002 Mnoznik" #define MSG_FACTOR " " STR_THERMOMETER " Fact"
#define MSG_AUTOTEMP "Auto. temperatura" #define MSG_AUTOTEMP "Auto. temperatura"
#define MSG_ON "Wl. " #define MSG_ON "Wl. "
#define MSG_OFF "Wyl." #define MSG_OFF "Wyl."
#define MSG_PID_P "PID-P" #define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I" #define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D" #define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_ACC "Przyspieszenie" #define MSG_ACC "Przyspieszenie"
#define MSG_VXY_JERK "Zryw Vxy" #define MSG_VXY_JERK "Zryw Vxy"
#define MSG_VZ_JERK "Zryw Vz" #define MSG_VZ_JERK "Zryw Vz"
...@@ -83,14 +74,20 @@ ...@@ -83,14 +74,20 @@
#define MSG_XSTEPS "krokiX/mm" #define MSG_XSTEPS "krokiX/mm"
#define MSG_YSTEPS "krokiY/mm" #define MSG_YSTEPS "krokiY/mm"
#define MSG_ZSTEPS "krokiZ/mm" #define MSG_ZSTEPS "krokiZ/mm"
#define MSG_ESTEPS "krokiE/mm" #define MSG_E0STEPS "E0 steps/mm"
#define MSG_E1STEPS "E1 steps/mm"
#define MSG_E2STEPS "E2 steps/mm"
#define MSG_E3STEPS "E3 steps/mm"
#define MSG_TEMPERATURE "Temperatura" #define MSG_TEMPERATURE "Temperatura"
#define MSG_MOTION "Ruch" #define MSG_MOTION "Ruch"
#define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm" STR_h3
#define MSG_FILAMENT_SIZE_EXTRUDER "Fil. Dia."
#define MSG_CONTRAST "Kontrast LCD" #define MSG_CONTRAST "Kontrast LCD"
#define MSG_STORE_EPROM "Zapisz w pamieci" #define MSG_STORE_EPROM "Zapisz w pamieci"
#define MSG_LOAD_EPROM "Wczytaj z pamieci" #define MSG_LOAD_EPROM "Wczytaj z pamieci"
#define MSG_RESTORE_FAILSAFE "Ustaw. fabryczne" #define MSG_RESTORE_FAILSAFE "Ustaw. fabryczne"
#define MSG_REFRESH "\004Odswiez" #define MSG_REFRESH "Refresh"
#define MSG_WATCH "Ekran glowny" #define MSG_WATCH "Ekran glowny"
#define MSG_PREPARE "Przygotuj" #define MSG_PREPARE "Przygotuj"
#define MSG_TUNE "Strojenie" #define MSG_TUNE "Strojenie"
...@@ -125,7 +122,37 @@ ...@@ -125,7 +122,37 @@
#define MSG_BABYSTEP_Z "Babystep Z" #define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Blad wyl. kranc." #define MSG_ENDSTOP_ABORT "Blad wyl. kranc."
#define MSG_RECTRACT "Wycofanie" #ifdef DELTA
#define MSG_STEPPER_RELEASED "Zwolniony." #define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
#define MSG_DELTA_CALIBRATE_Y "Calibrate Y"
#define MSG_DELTA_CALIBRATE_Z "Calibrate Z"
#define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center"
#endif // DELTA
#define MSG_LASER "Laser Preset"
#define MSG_CONFIG "Configuration"
#define MSG_BAUDRATE "Baudrate"
#define MSG_E_BOWDEN_LENGTH "Extrude " STRINGIFY(BOWDEN_LENGTH) "mm"
#define MSG_R_BOWDEN_LENGTH "Retract " STRINGIFY(BOWDEN_LENGTH) "mm"
#define MSG_PURGE_XMM "Purge " STRINGIFY(LCD_PURGE_LENGTH) "mm"
#define MSG_RETRACT_XMM "Retract " STRINGIFY(LCD_RETRACT_LENGTH) "mm"
#ifdef FIRMWARE_TEST
#define MSG_FWTEST_YES "Put the Y command to go next"
#define MSG_FWTEST_NO "Put the N command to go next"
#define MSG_FWTEST_YES_NO "Put the Y or N command to go next"
#define MSG_FWTEST_ENDSTOP_ERR "ENDSTOP ERROR! Check wire and connection"
#define MSG_FWTEST_PRESS "Press and hold the endstop "
#define MSG_FWTEST_INVERT "Reverse value in "
#define MSG_FWTEST_XAXIS "Has the nozzle moved to the right?"
#define MSG_FWTEST_YAXIS "Has the nozzle moved forward?"
#define MSG_FWTEST_ZAXIS "Has the nozzle moved up?"
#define MSG_FWTEST_01 "Manually move the axes X, Y and Z away from the endstop"
#define MSG_FWTEST_02 "Do you want check ENDSTOP?"
#define MSG_FWTEST_03 "Start check ENDSTOP"
#define MSG_FWTEST_04 "Start check MOTOR"
#define MSG_FWTEST_ATTENTION "ATTENTION! Check that the three axes are more than 5 mm from the endstop!"
#endif // FIRMWARE_TEST
#endif // LANGUAGE_PL_H #endif // LANGUAGE_PL_H
MarlinKimbra/language_pt-br.h
View file @ 296d8557
...@@ -8,31 +8,34 @@ ...@@ -8,31 +8,34 @@
#ifndef LANGUAGE_PT_BR_H #ifndef LANGUAGE_PT_BR_H
#define LANGUAGE_PT_BR_H #define LANGUAGE_PT_BR_H
#define WELCOME_MSG MACHINE_NAME " pronto." #define WELCOME_MSG MACHINE_NAME " pronto."
#define MSG_SD_INSERTED "Cartao inserido" #define MSG_SD_INSERTED "Cartao inserido"
#define MSG_SD_REMOVED "Cartao removido" #define MSG_SD_REMOVED "Cartao removido"
#define MSG_MAIN " Menu principal \003" #define MSG_MAIN " Menu principal \003"
#define MSG_AUTOSTART "Autostart" #define MSG_AUTOSTART "Autostart"
#define MSG_DISABLE_STEPPERS " Apagar motores" #define MSG_DISABLE_STEPPERS " Apagar motores"
#define MSG_AUTO_HOME "Ir para origen" #define MSG_AUTO_HOME "Ir para origen"
#define MSG_BED_SETTING "Bed Setting"
#define MSG_SET_HOME_OFFSETS "Set home offsets" #define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Estabelecer orig." #define MSG_SET_ORIGIN "Estabelecer orig."
#define MSG_PREHEAT_PLA "Pre-aquecer PLA" #define MSG_PREHEAT_PLA "Pre-aquecer PLA"
#define MSG_PREHEAT_PLA_N "Pre-aquecer PLA "
#define MSG_PREHEAT_PLA_ALL "Pre-aq. PLA Tudo" #define MSG_PREHEAT_PLA_ALL "Pre-aq. PLA Tudo"
#define MSG_PREHEAT_PLA_BEDONLY "Pre-aq. PLA \002Base" #define MSG_PREHEAT_PLA_BEDONLY "Pre-aq. PLA \002Base"
#define MSG_PREHEAT_PLA_SETTINGS "PLA setting" #define MSG_PREHEAT_PLA_SETTINGS "PLA setting"
#define MSG_PREHEAT_ABS "Pre-aquecer ABS" #define MSG_PREHEAT_ABS "Pre-aquecer ABS"
#define MSG_PREHEAT_ABS_N "Pre-aquecer ABS "
#define MSG_PREHEAT_ABS_ALL "Pre-aq. ABS Tudo" #define MSG_PREHEAT_ABS_ALL "Pre-aq. ABS Tudo"
#define MSG_PREHEAT_ABS_BEDONLY "Pre-aq. ABS \002Base" #define MSG_PREHEAT_ABS_BEDONLY "Pre-aq. ABS \002Base"
#define MSG_PREHEAT_ABS_SETTINGS "ABS setting" #define MSG_PREHEAT_ABS_SETTINGS "ABS setting"
#define MSG_PREHEAT_GUM "Preheat GUM"
#define MSG_PREHEAT_GUM_ALL "Preheat GUM All"
#define MSG_PREHEAT_GUM_BEDONLY "Preheat GUM Bed"
#define MSG_PREHEAT_GUM_SETTINGS "Preheat GUM conf"
#define MSG_COOLDOWN "Esfriar" #define MSG_COOLDOWN "Esfriar"
#define MSG_SWITCH_PS_ON "Switch Power On" #define MSG_SWITCH_PS_ON "Switch Power On"
#define MSG_SWITCH_PS_OFF "Switch Power Off" #define MSG_SWITCH_PS_OFF "Switch Power Off"
#define MSG_EXTRUDE "Extrudar" #define MSG_EXTRUDE "Extrudar"
#define MSG_RETRACT "Retrair" #define MSG_RETRACT "Retrair"
#define MSG_MOVE_AXIS "Mover eixo \x7E" #define MSG_MOVE_AXIS "Mover eixo"
#define MSG_MOVE_X "Move X" #define MSG_MOVE_X "Move X"
#define MSG_MOVE_Y "Move Y" #define MSG_MOVE_Y "Move Y"
#define MSG_MOVE_Z "Move Z" #define MSG_MOVE_Z "Move Z"
...@@ -41,21 +44,20 @@ ...@@ -41,21 +44,20 @@
#define MSG_MOVE_1MM "Move 1mm" #define MSG_MOVE_1MM "Move 1mm"
#define MSG_MOVE_10MM "Move 10mm" #define MSG_MOVE_10MM "Move 10mm"
#define MSG_SPEED "Velocidade" #define MSG_SPEED "Velocidade"
#define MSG_NOZZLE "\002Nozzle" #define MSG_NOZZLE "Nozzle"
#define MSG_BED "\002Base" #define MSG_BED "Base"
#define MSG_FAN_SPEED "Velocidade vento." #define MSG_FAN_SPEED "Velocidade vento."
#define MSG_FLOW "Fluxo" #define MSG_FLOW "Fluxo"
#define MSG_CONTROL "Controle \003" #define MSG_CONTROL "Controle"
#define MSG_MIN "\002 Min" #define MSG_MIN " " STR_THERMOMETER " Min"
#define MSG_MAX "\002 Max" #define MSG_MAX " " STR_THERMOMETER " Max"
#define MSG_FACTOR "\002 Fact" #define MSG_FACTOR " " STR_THERMOMETER " Fact"
#define MSG_AUTOTEMP "Autotemp" #define MSG_AUTOTEMP "Autotemp"
#define MSG_ON "On " #define MSG_ON "On "
#define MSG_OFF "Off" #define MSG_OFF "Off"
#define MSG_PID_P "PID-P" #define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I" #define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D" #define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_ACC "Acc" #define MSG_ACC "Acc"
#define MSG_VXY_JERK "Vxy-jerk" #define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk" #define MSG_VZ_JERK "Vz-jerk"
...@@ -72,22 +74,23 @@ ...@@ -72,22 +74,23 @@
#define MSG_XSTEPS "Xpasso/mm" #define MSG_XSTEPS "Xpasso/mm"
#define MSG_YSTEPS "Ypasso/mm" #define MSG_YSTEPS "Ypasso/mm"
#define MSG_ZSTEPS "Zpasso/mm" #define MSG_ZSTEPS "Zpasso/mm"
#define MSG_ESTEPS "Epasso/mm" #define MSG_E0STEPS "E0 steps/mm"
#define MSG_E1STEPS "E1 steps/mm"
#define MSG_E2STEPS "E2 steps/mm"
#define MSG_E3STEPS "E3 steps/mm"
#define MSG_TEMPERATURE "Temperatura" #define MSG_TEMPERATURE "Temperatura"
#define MSG_MOTION "Movimento" #define MSG_MOTION "Movimento"
#define MSG_VOLUMETRIC "Filament" #define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm3" #define MSG_VOLUMETRIC_ENABLED "E in mm" STR_h3
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1" #define MSG_FILAMENT_SIZE_EXTRUDER "Fil. Dia."
#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2"
#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3"
#define MSG_CONTRAST "Contrast" #define MSG_CONTRAST "Contrast"
#define MSG_STORE_EPROM "Guardar memoria" #define MSG_STORE_EPROM "Guardar memoria"
#define MSG_LOAD_EPROM "Carregar memoria" #define MSG_LOAD_EPROM "Carregar memoria"
#define MSG_RESTORE_FAILSAFE "Rest. de emergen." #define MSG_RESTORE_FAILSAFE "Rest. de emergen."
#define MSG_REFRESH "\004Recarregar" #define MSG_REFRESH "Recarregar"
#define MSG_WATCH "Monitorar \003" #define MSG_WATCH "Monitorar"
#define MSG_PREPARE "Preparar \x7E" #define MSG_PREPARE "Preparar"
#define MSG_TUNE "Tune \x7E" #define MSG_TUNE "Tune"
#define MSG_PAUSE_PRINT "Pausar impressao" #define MSG_PAUSE_PRINT "Pausar impressao"
#define MSG_RESUME_PRINT "Resumir impressao" #define MSG_RESUME_PRINT "Resumir impressao"
#define MSG_STOP_PRINT "Parar impressao" #define MSG_STOP_PRINT "Parar impressao"
...@@ -119,12 +122,37 @@ ...@@ -119,12 +122,37 @@
#define MSG_BABYSTEP_Z "Babystep Z" #define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort" #define MSG_ENDSTOP_ABORT "Endstop abort"
#ifdef DELTA_CALIBRATION_MENU #ifdef DELTA
#define MSG_DELTA_CALIBRATE "Delta Calibration" #define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X" #define MSG_DELTA_CALIBRATE_X "Calibrate X"
#define MSG_DELTA_CALIBRATE_Y "Calibrate Y" #define MSG_DELTA_CALIBRATE_Y "Calibrate Y"
#define MSG_DELTA_CALIBRATE_Z "Calibrate Z" #define MSG_DELTA_CALIBRATE_Z "Calibrate Z"
#define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center" #define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center"
#endif // DELTA_CALIBRATION_MENU #endif // DELTA
#define MSG_LASER "Laser Preset"
#define MSG_CONFIG "Configuration"
#define MSG_BAUDRATE "Baudrate"
#define MSG_E_BOWDEN_LENGTH "Extrude " STRINGIFY(BOWDEN_LENGTH) "mm"
#define MSG_R_BOWDEN_LENGTH "Retract " STRINGIFY(BOWDEN_LENGTH) "mm"
#define MSG_PURGE_XMM "Purge " STRINGIFY(LCD_PURGE_LENGTH) "mm"
#define MSG_RETRACT_XMM "Retract " STRINGIFY(LCD_RETRACT_LENGTH) "mm"
#ifdef FIRMWARE_TEST
#define MSG_FWTEST_YES "Put the Y command to go next"
#define MSG_FWTEST_NO "Put the N command to go next"
#define MSG_FWTEST_YES_NO "Put the Y or N command to go next"
#define MSG_FWTEST_ENDSTOP_ERR "ENDSTOP ERROR! Check wire and connection"
#define MSG_FWTEST_PRESS "Press and hold the endstop "
#define MSG_FWTEST_INVERT "Reverse value in "
#define MSG_FWTEST_XAXIS "Has the nozzle moved to the right?"
#define MSG_FWTEST_YAXIS "Has the nozzle moved forward?"
#define MSG_FWTEST_ZAXIS "Has the nozzle moved up?"
#define MSG_FWTEST_01 "Manually move the axes X, Y and Z away from the endstop"
#define MSG_FWTEST_02 "Do you want check ENDSTOP?"
#define MSG_FWTEST_03 "Start check ENDSTOP"
#define MSG_FWTEST_04 "Start check MOTOR"
#define MSG_FWTEST_ATTENTION "ATTENTION! Check that the three axes are more than 5 mm from the endstop!"
#endif // FIRMWARE_TEST
#endif // LANGUAGE_PT_BR_H #endif // LANGUAGE_PT_BR_H
MarlinKimbra/language_pt.h
View file @ 296d8557
...@@ -8,29 +8,28 @@ ...@@ -8,29 +8,28 @@
#ifndef LANGUAGE_PT_H #ifndef LANGUAGE_PT_H
#define LANGUAGE_PT_H #define LANGUAGE_PT_H
#define WELCOME_MSG MACHINE_NAME " pronto." #define WELCOME_MSG MACHINE_NAME " pronto."
#define MSG_SD_INSERTED "Cartao inserido" #define MSG_SD_INSERTED "Cartao inserido"
#define MSG_SD_REMOVED "Cartao removido" #define MSG_SD_REMOVED "Cartao removido"
#define MSG_MAIN " Menu principal \003" #define MSG_MAIN " Menu principal \003"
#define MSG_AUTOSTART "Autostart" #define MSG_AUTOSTART "Autostart"
#define MSG_DISABLE_STEPPERS " Apagar motores" #define MSG_DISABLE_STEPPERS " Apagar motores"
#define MSG_AUTO_HOME "Ir para origen" #define MSG_AUTO_HOME "Ir para origen"
#define MSG_BED_SETTING "Bed Setting"
#define MSG_SET_HOME_OFFSETS "Set home offsets" #define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Estabelecer orig." #define MSG_SET_ORIGIN "Estabelecer orig."
#define MSG_PREHEAT_PLA "Pre-aquecer PLA" #define MSG_PREHEAT_PLA "Pre-aquecer PLA"
#define MSG_PREHEAT_PLA0 " pre-aquecer PLA 1" #define MSG_PREHEAT_PLA_ALL " pre-aq. PLA Tudo"
#define MSG_PREHEAT_PLA1 " pre-aquecer PLA 2"
#define MSG_PREHEAT_PLA2 " pre-aquecer PLA 3"
#define MSG_PREHEAT_PLA012 " pre-aq. PLA Tudo"
#define MSG_PREHEAT_PLA_BEDONLY " pre-aq. PLA \002Base" #define MSG_PREHEAT_PLA_BEDONLY " pre-aq. PLA \002Base"
#define MSG_PREHEAT_PLA_SETTINGS "PLA setting" #define MSG_PREHEAT_PLA_SETTINGS "PLA setting"
#define MSG_PREHEAT_ABS "Pre-aquecer ABS" #define MSG_PREHEAT_ABS "Pre-aquecer ABS"
#define MSG_PREHEAT_ABS0 " pre-aquecer ABS 1" #define MSG_PREHEAT_ABS_ALL " pre-aq. ABS Tudo"
#define MSG_PREHEAT_ABS1 " pre-aquecer ABS 2"
#define MSG_PREHEAT_ABS2 " pre-aquecer ABS 3"
#define MSG_PREHEAT_ABS012 " pre-aq. ABS Tudo"
#define MSG_PREHEAT_ABS_BEDONLY " pre-aq. ABS \002Base" #define MSG_PREHEAT_ABS_BEDONLY " pre-aq. ABS \002Base"
#define MSG_PREHEAT_ABS_SETTINGS "ABS setting" #define MSG_PREHEAT_ABS_SETTINGS "ABS setting"
#define MSG_PREHEAT_GUM "Preheat GUM"
#define MSG_PREHEAT_GUM_ALL "Preheat GUM All"
#define MSG_PREHEAT_GUM_BEDONLY "Preheat GUM Bed"
#define MSG_PREHEAT_GUM_SETTINGS "Preheat GUM conf"
#define MSG_COOLDOWN "Esfriar" #define MSG_COOLDOWN "Esfriar"
#define MSG_SWITCH_PS_ON "Switch Power On" #define MSG_SWITCH_PS_ON "Switch Power On"
#define MSG_SWITCH_PS_OFF "Switch Power Off" #define MSG_SWITCH_PS_OFF "Switch Power Off"
...@@ -41,32 +40,24 @@ ...@@ -41,32 +40,24 @@
#define MSG_MOVE_Y "Move Y" #define MSG_MOVE_Y "Move Y"
#define MSG_MOVE_Z "Move Z" #define MSG_MOVE_Z "Move Z"
#define MSG_MOVE_E "Extruder" #define MSG_MOVE_E "Extruder"
#define MSG_MOVE_E1 "Extruder2"
#define MSG_MOVE_E2 "Extruder3"
#define MSG_MOVE_01MM "Move 0.1mm" #define MSG_MOVE_01MM "Move 0.1mm"
#define MSG_MOVE_1MM "Move 1mm" #define MSG_MOVE_1MM "Move 1mm"
#define MSG_MOVE_10MM "Move 10mm" #define MSG_MOVE_10MM "Move 10mm"
#define MSG_SPEED "Velocidade:" #define MSG_SPEED "Velocidade:"
#define MSG_NOZZLE "\002Nozzle:" #define MSG_NOZZLE "Nozzle:"
#define MSG_NOZZLE1 "\002Nozzle2:" #define MSG_BED "Base:"
#define MSG_NOZZLE2 "\002Nozzle3:"
#define MSG_BED "\002Base:"
#define MSG_FAN_SPEED "Velocidade vento." #define MSG_FAN_SPEED "Velocidade vento."
#define MSG_FLOW "Fluxo:" #define MSG_FLOW "Fluxo"
#define MSG_FLOW0 "Fluxo0:" #define MSG_CONTROL "Controle"
#define MSG_FLOW1 "Fluxo1:" #define MSG_MIN " " STR_THERMOMETER " Min"
#define MSG_FLOW2 "Fluxo2:" #define MSG_MAX " " STR_THERMOMETER " Max"
#define MSG_CONTROL "Controle \003" #define MSG_FACTOR " " STR_THERMOMETER " Fact"
#define MSG_MIN "\002 Min:"
#define MSG_MAX "\002 Max:"
#define MSG_FACTOR "\002 Fact:"
#define MSG_AUTOTEMP "Autotemp:" #define MSG_AUTOTEMP "Autotemp:"
#define MSG_ON "On " #define MSG_ON "On "
#define MSG_OFF "Off" #define MSG_OFF "Off"
#define MSG_PID_P "PID-P: " #define MSG_PID_P "PID-P: "
#define MSG_PID_I "PID-I: " #define MSG_PID_I "PID-I: "
#define MSG_PID_D "PID-D: " #define MSG_PID_D "PID-D: "
#define MSG_PID_C "PID-C: "
#define MSG_ACC "Acc:" #define MSG_ACC "Acc:"
#define MSG_VXY_JERK "Vxy-jerk: " #define MSG_VXY_JERK "Vxy-jerk: "
#define MSG_VZ_JERK "Vz-jerk" #define MSG_VZ_JERK "Vz-jerk"
...@@ -83,17 +74,23 @@ ...@@ -83,17 +74,23 @@
#define MSG_XSTEPS "Xpasso/mm:" #define MSG_XSTEPS "Xpasso/mm:"
#define MSG_YSTEPS "Ypasso/mm:" #define MSG_YSTEPS "Ypasso/mm:"
#define MSG_ZSTEPS "Zpasso/mm:" #define MSG_ZSTEPS "Zpasso/mm:"
#define MSG_ESTEPS "Epasso/mm:" #define MSG_E0STEPS "E0 steps/mm"
#define MSG_E1STEPS "E1 steps/mm"
#define MSG_E2STEPS "E2 steps/mm"
#define MSG_E3STEPS "E3 steps/mm"
#define MSG_TEMPERATURE "Temperatura" #define MSG_TEMPERATURE "Temperatura"
#define MSG_MOTION "Movimento" #define MSG_MOTION "Movimento"
#define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm" STR_h3
#define MSG_FILAMENT_SIZE_EXTRUDER "Fil. Dia."
#define MSG_CONTRAST "Contrast" #define MSG_CONTRAST "Contrast"
#define MSG_STORE_EPROM "Guardar memoria" #define MSG_STORE_EPROM "Guardar memoria"
#define MSG_LOAD_EPROM "Carregar memoria" #define MSG_LOAD_EPROM "Carregar memoria"
#define MSG_RESTORE_FAILSAFE "Rest. de emergen." #define MSG_RESTORE_FAILSAFE "Rest. de emergen."
#define MSG_REFRESH "\004Recarregar" #define MSG_REFRESH "Recarregar"
#define MSG_WATCH "Monitorar \003" #define MSG_WATCH "Monitorar"
#define MSG_PREPARE "Preparar \x7E" #define MSG_PREPARE "Preparar"
#define MSG_TUNE "Tune \x7E" #define MSG_TUNE "Tune"
#define MSG_PAUSE_PRINT "Pausar impressao" #define MSG_PAUSE_PRINT "Pausar impressao"
#define MSG_RESUME_PRINT "Resumir impressao" #define MSG_RESUME_PRINT "Resumir impressao"
#define MSG_STOP_PRINT "Parar impressao" #define MSG_STOP_PRINT "Parar impressao"
...@@ -125,11 +122,37 @@ ...@@ -125,11 +122,37 @@
#define MSG_BABYSTEP_Z "Babystep Z" #define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort" #define MSG_ENDSTOP_ABORT "Endstop abort"
#define MSG_RECTRACT "Retrair" #ifdef DELTA
#define MSG_MAIN_WIDE "Menu Principal \003" #define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_PREPARE_ALT "Preparar \003" #define MSG_DELTA_CALIBRATE_X "Calibrate X"
#define MSG_CONTROL_ARROW "Controle \x7E" #define MSG_DELTA_CALIBRATE_Y "Calibrate Y"
#define MSG_RETRACT_ARROW "Retrair \x7E" #define MSG_DELTA_CALIBRATE_Z "Calibrate Z"
#define MSG_STEPPER_RELEASED "Lancado." #define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center"
#endif // DELTA
#define MSG_LASER "Laser Preset"
#define MSG_CONFIG "Configuration"
#define MSG_BAUDRATE "Baudrate"
#define MSG_E_BOWDEN_LENGTH "Extrude " STRINGIFY(BOWDEN_LENGTH) "mm"
#define MSG_R_BOWDEN_LENGTH "Retract " STRINGIFY(BOWDEN_LENGTH) "mm"
#define MSG_PURGE_XMM "Purge " STRINGIFY(LCD_PURGE_LENGTH) "mm"
#define MSG_RETRACT_XMM "Retract " STRINGIFY(LCD_RETRACT_LENGTH) "mm"
#ifdef FIRMWARE_TEST
#define MSG_FWTEST_YES "Put the Y command to go next"
#define MSG_FWTEST_NO "Put the N command to go next"
#define MSG_FWTEST_YES_NO "Put the Y or N command to go next"
#define MSG_FWTEST_ENDSTOP_ERR "ENDSTOP ERROR! Check wire and connection"
#define MSG_FWTEST_PRESS "Press and hold the endstop "
#define MSG_FWTEST_INVERT "Reverse value in "
#define MSG_FWTEST_XAXIS "Has the nozzle moved to the right?"
#define MSG_FWTEST_YAXIS "Has the nozzle moved forward?"
#define MSG_FWTEST_ZAXIS "Has the nozzle moved up?"
#define MSG_FWTEST_01 "Manually move the axes X, Y and Z away from the endstop"
#define MSG_FWTEST_02 "Do you want check ENDSTOP?"
#define MSG_FWTEST_03 "Start check ENDSTOP"
#define MSG_FWTEST_04 "Start check MOTOR"
#define MSG_FWTEST_ATTENTION "ATTENTION! Check that the three axes are more than 5 mm from the endstop!"
#endif // FIRMWARE_TEST
#endif // LANGUAGE_PT_H #endif // LANGUAGE_PT_H
MarlinKimbra/language_ru.h
View file @ 296d8557
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment