Skip to content

M
MarlinKimbra
Commit 21cdd97f authored by MagoKimbra's avatar MagoKimbra
Browse files
Options

Fix Delta for configurator tool

parent c4f77ca4
Show whitespace changes
Inline Side-by-side
Showing with 28 additions and 33 deletions
MarlinKimbra/Configuration_Delta.h
View file @ 21cdd97f
......@@ -14,9 +14,9 @@
* - Stepper step logic
* - Stepper direction
* - Disables axis
* - Manual home positions
* - Travel limits
* - Axis relative mode
* - Manual home positions
* - Axis steps per unit
* - Axis feedrate
* - Axis accelleration
......@@ -262,6 +262,20 @@
/*****************************************************************************************/
/*****************************************************************************************
******************************** Manual home positions **********************************
*****************************************************************************************/
// The position of the homing switches
#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used
#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
//Manual homing switch locations:
#define MANUAL_X_HOME_POS 0
#define MANUAL_Y_HOME_POS 0
#define MANUAL_Z_HOME_POS 200 // Distance between nozzle and print surface after homing.
/*****************************************************************************************/
/*****************************************************************************************
************************************ Travel limits **************************************
*****************************************************************************************
......@@ -286,38 +300,21 @@
/*****************************************************************************************/
/*****************************************************************************************
******************************** Manual home positions **********************************
*****************************************************************************************/
// The position of the homing switches
#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used
#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
//Manual homing switch locations:
#define MANUAL_X_HOME_POS 0
#define MANUAL_Y_HOME_POS 0
#define MANUAL_Z_HOME_POS 200 // Distance between nozzle and print surface after homing.
/*****************************************************************************************/
/*****************************************************************************************
******************************* Axis steps per unit *************************************
*****************************************************************************************/
#define XYZ_STEPS_PER_UNIT 80
// Default steps per unit X, Y, Z, E0...(per extruder)
#define DEFAULT_AXIS_STEPS_PER_UNIT {XYZ_STEPS_PER_UNIT, XYZ_STEPS_PER_UNIT, XYZ_STEPS_PER_UNIT, 625, 625, 625, 625}
// Default steps per unit X, Y, Z, E0...(per extruder)
#define DEFAULT_AXIS_STEPS_PER_UNIT {80, 80, 80, 625, 625, 625, 625}
/*****************************************************************************************/
/*****************************************************************************************
********************************** Axis feedrate ****************************************
*****************************************************************************************/
#define XYZ_MAX_FEEDRATE 500 // (mm/sec)
#define XYZ_MANUAL_FEEDRATE 50 // (mm/min)
// X, Y, Z, E0...(per extruder). (mm/sec)
#define DEFAULT_MAX_FEEDRATE {XYZ_MAX_FEEDRATE, XYZ_MAX_FEEDRATE, XYZ_MAX_FEEDRATE, 100, 100, 100, 100}
#define DEFAULT_MAX_FEEDRATE {500, 500, 500, 100, 100, 100, 100}
// Feedrates for manual moves along X, Y, Z, E from panel
#define MANUAL_FEEDRATE {XYZ_MANUAL_FEEDRATE*60, XYZ_MANUAL_FEEDRATE*60, XYZ_MANUAL_FEEDRATE*60, 60}
#define MANUAL_FEEDRATE {50*60, 50*60, 50*60, 60}
#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate
#define DEFAULT_MINTRAVELFEEDRATE 0.0
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
......@@ -330,9 +327,8 @@
/*****************************************************************************************
******************************** Axis accelleration *************************************
*****************************************************************************************/
#define XYZ_MAX_ACCELERATION 5000 // (mm/s^2)
// Maximum start speed for accelerated moves. X, Y, Z, E0...(per extruder)
#define DEFAULT_MAX_ACCELERATION {XYZ_MAX_ACCELERATION, XYZ_MAX_ACCELERATION, XYZ_MAX_ACCELERATION, 1000, 1000, 1000, 1000}
#define DEFAULT_MAX_ACCELERATION {5000, 5000, 5000, 1000, 1000, 1000, 1000}
// Maximum acceleration in mm/s^2 for retracts E0... (per extruder)
#define DEFAULT_RETRACT_ACCELERATION {10000, 10000, 10000, 10000}
// X, Y, Z and E* maximum acceleration in mm/s^2 for printing moves
......@@ -360,10 +356,8 @@
/*****************************************************************************************
************************************ Homing feedrate ************************************
*****************************************************************************************/
// set the homing speeds (mm/min)
#define HOMING_XYZ_FEEDRATE 100
#define HOMING_FEEDRATE {HOMING_XYZ_FEEDRATE*60, HOMING_XYZ_FEEDRATE*60, HOMING_XYZ_FEEDRATE*60, 0}
// set the homing speeds (mm/min) X, Y, Z
#define HOMING_FEEDRATE {100*60, 100*60, 100*60, 0}
// homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
#define XYZ_HOME_BUMP_MM 5
// Re-Bump Speed Divisor (Divides the Homing Feedrate)
......
MarlinKimbra/Configuration_Feature.h
View file @ 21cdd97f
......@@ -439,6 +439,7 @@
* Set DONDOLO SERVOPOS E0 angle for E0 extruder *
* Set DONDOLO SERVOPOS E1 angle for E1 extruder *
* Remember set HOTEND OFFSET X Y Z *
* *
***********************************************************************/
//#define DONDOLO
#define DONDOLO_SERVO_INDEX 0
......@@ -977,10 +978,10 @@
* M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). *
* M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. *
* *
* Uncomment EEPROM_SETTINGS to enable this feature. *
* Uncomment EEPROM SETTINGS to enable this feature. *
* Uncomment EEPROM CHITCHAT to enable EEPROM Serial responses. *
* *
************************************************************************************************************************/
// Uncomment EEPROM_SETTINGS to enable EEPROM support
//#define EEPROM_SETTINGS
//#define EEPROM_CHITCHAT // Uncomment this to enable EEPROM Serial responses.
//#define DISABLE_M503
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment