Skip to content

M
MarlinKimbra
Commit 184769cb authored by MagoKimbra's avatar MagoKimbra
Browse files
Options

Update 4.2.83 

Add Cooler and Hot Chamber
Add Laser PWM and raster base 64
parent 3fdffbe0
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 4051 additions and 827 deletions
Documentation/GCodes.md
View file @ 184769cb
......@@ -7,9 +7,10 @@
* G2 - CW ARC
* G3 - CCW ARC
* G4 - Dwell S[seconds] or P[milliseconds], delay in Second or Millisecond
* G7 - Laser raster base64
* G10 - retract filament according to settings of M207
* G11 - retract recover filament according to settings of M208
* G28 - X0 Y0 Z0 Home all Axis. G28 M for bed manual setting with LCD.
* G28 - X Y Z Home all Axis. M for bed manual setting with LCD. B return to back point
* G29 - Detailed Z-Probe, probes the bed at 3 points or grid. You must be at the home position for this to work correctly.
G29 Fyyy Lxxx Rxxx Byyy for customer grid.
* G30 - Single Z Probe, probes bed at current XY location. Bed Probe and Delta geometry Autocalibration G30 A
......@@ -45,7 +46,8 @@
* M32 - Make directory
* M35 - Upload Firmware to Nextion from SD
* M42 - Change pin status via gcode Use M42 Px Sy to set pin x to value y, when omitting Px the onboard led will be used.
* M49 - Z probe repetability test
* M48 - Measure Z_Probe repeatability. M48 [P # of points] [X position] [Y position] [V_erboseness #] [E_ngage Probe] [L # of legs of travel]
* M70 - Power consumption sensor calibration
* M80 - Turn on Power Supply
* M81 - Turn off Power, including Power Supply, if possible
* M82 - Set E codes absolute (default)
......@@ -58,26 +60,29 @@
* M98 - Print Hysteresis value
* M99 - Set Hysteresis parameter M99 X<in mm> Y<in mm> Z<in mm> E<in mm>
* M100 - Watch Free Memory (For Debugging Only)
* M104 - Set extruder target temp
* M104 - Set hotend target temp
* M105 - Read current temp
* M106 - Fan on
* M107 - Fan off
* M109 - S[xxx] Wait for extruder current temp to reach target temp. Waits only when heating
- R[xxx] Wait for extruder current temp to reach target temp. Waits when heating and cooling
* M111 - Debug Dryrun Repetier
* M109 - S[xxx] Wait for hotend current temp to reach target temp. Waits only when heating
- R[xxx] Wait for hotend current temp to reach target temp. Waits when heating and cooling
* M110 - Set the current line number
* M111 - Set debug flags with S<mask>.
* M112 - Emergency stop
* M114 - Output current position to serial port, (V)erbose for user
* M114 - Output current position to serial port
* M115 - Capabilities string
* M117 - display message
* M117 - Display a message on the controller screen
* M119 - Output Endstop status to serial port
* M120 - Disable Endstop
* M121 - Enable Endstop
* M120 - Enable endstop detection
* M121 - Disable endstop detection
* M122 - S<1=true/0=false> Enable or disable check software endstop
* M126 - Solenoid Air Valve Open (BariCUDA support by jmil)
* M127 - Solenoid Air Valve Closed (BariCUDA vent to atmospheric pressure by jmil)
* M128 - EtoP Open (BariCUDA EtoP = electricity to air pressure transducer by jmil)
* M129 - EtoP Closed (BariCUDA EtoP = electricity to air pressure transducer by jmil)
* M140 - Set bed target temp
* M140 - Set hot bed target temp
* M141 - Set hot chamber target temp
* M142 - Set cooler target temp
* M145 - Set the heatup state H<hotend> B<bed> F<fan speed> for S<material> (0=PLA, 1=ABS)
* M150 - Set BlinkM Color Output R: Red<0-255> U(!): Green<0-255> B: Blue<0-255> over i2c, G for green does not work.
* M163 - Set a single proportion for a mixing extruder. Requires COLOR_MIXING_EXTRUDER.
......@@ -85,6 +90,10 @@
* M165 - Set the proportions for a mixing extruder. Use parameters ABCDHI to set the mixing factors. Requires COLOR_MIXING_EXTRUDER.
* M190 - S[xxx] Wait for bed current temp to reach target temp. Waits only when heating
- R[xxx] Wait for bed current temp to reach target temp. Waits when heating and cooling
* M191 - Sxxx Wait for chamber current temp to reach target temp. Waits only when heating
* Rxxx Wait for chamber current temp to reach target temp. Waits when heating and cooling
* M192 - Sxxx Wait for cooler current temp to reach target temp. Waits only when heating
* Rxxx Wait for cooler current temp to reach target temp. Waits when heating and cooling
* M200 - D[millimeters]- set filament diameter and set E axis units to cubic millimeters (use S0 to set back to millimeters).
* M201 - Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000 Z1000 E0 S1000 E1 S1000 E2 S1000 E3 S1000) in mm/sec^2
* M203 - Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E0 S1000 E1 S1000 E2 S1000 E3 S1000) in mm/sec
......@@ -104,7 +113,9 @@
* M301 - Set PID parameters P I and D
* M302 - Allow cold extrudes
* M303 - PID relay autotune S<temperature> sets the target temperature (default target temperature = 150C). H<hotend> C<cycles> U<Apply result>
* M304 - Set bed PID parameters P I and D
* M304 - Set hot bed PID parameters P I and D
* M305 - Set hot chamber PID parameters P I and D
* M306 - Set cooler PID parameters P I and D
* M350 - Set microstepping mode.
* M351 - Toggle MS1 MS2 pins directly.
* M400 - Finish all moves
......@@ -131,4 +142,5 @@
* M907 - Set digital trimpot motor current using axis codes.
* M908 - Control digital trimpot directly.
* M928 - Start SD logging (M928 filename.g) - ended by M29
* M997 - NPR2 Color rotate
* M999 - Restart after being stopped by error
Documentation/changelog.md
View file @ 184769cb
### Version 4.2.83
* Add Cooler and Hot Chamber
* Add Laser Beam PWM and raster base64 ONLY ARDUINO MEGA
### Version 4.2.82
* Add DONDOLO_DUAL_MOTOR for DONDOLO bowden and dual extruder
* Add reader TAG width MFRC522
......
MK/Configuration_Basic.h
View file @ 184769cb
......@@ -7,10 +7,9 @@
* - Board type
* - Mechanism type
* - Extruders number
* - Thermistor type
* - Temperature limits
*
* Mechanisms-settings can be found in Configuration_Xxxxxx.h (where Xxxxxx can be: Cartesian - Delta - Core - Scara)
* Temperature settings can be found in Configuration_Temperature.h
* Feature-settings can be found in Configuration_Feature.h
* Pins-settings can be found in "Configuration_Pins.h"
*/
......@@ -127,118 +126,4 @@
#define DRIVER_EXTRUDERS 1
/***********************************************************************/
/*****************************************************************************************************
************************************** Thermistor type **********************************************
*****************************************************************************************************
* *
* 4.7kohm PULLUP! *
* This is a normal value, if you use a 1k pullup thermistor see below *
* Please choose the one that matches your setup and set to TEMP_SENSOR_. *
* *
* Temperature sensor settings (4.7kohm PULLUP): *
* -2 is thermocouple with MAX6675 (only for sensor 0) *
* -1 is thermocouple with AD595 or AD597 *
* 0 is not used *
* 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup) *
* 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) *
* 3 is Mendel-parts thermistor (4.7k pullup) *
* 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! *
* 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup) *
* 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) *
* 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) *
* 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) *
* 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) *
* 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) *
* 10 is 100k RS thermistor 198-961 (4.7k pullup) *
* 11 is 100k beta 3950 1% thermistor (4.7k pullup) *
* 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) *
* 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" *
* 20 is the PT100 circuit found in the Ultimainboard V2.x *
* 40 is the 10k Carel NTC015WH01 or ELIWELL SN8T6A1502 (4.7k pullup) *
* 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 *
* *
* 1kohm PULLUP! *
* This is not normal, you would have to have changed out your 4.7k for 1k *
* (but gives greater accuracy and more stable PID) *
* Please choose the one that matches your setup. *
* *
* Temperature sensor settings (1kohm PULLUP): *
* 51 is 100k thermistor - EPCOS (1k pullup) *
* 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup) *
* 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) *
* *
* 1047 is Pt1000 with 4k7 pullup *
* 1010 is Pt1000 with 1k pullup (non standard) *
* 147 is Pt100 with 4k7 pullup *
* 110 is Pt100 with 1k pullup (non standard) *
* 998 and 999 are Dummy Tables. ALWAYS read 25°C or DUMMY_THERMISTOR_998_VALUE temperature *
* *
*****************************************************************************************************/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
#define TEMP_SENSOR_2 0
#define TEMP_SENSOR_3 0
#define TEMP_SENSOR_BED 0
//These 2 defines help to calibrate the AD595 sensor in case you get wrong temperature measurements.
//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET"
#define TEMP_SENSOR_AD595_OFFSET 0.0
#define TEMP_SENSOR_AD595_GAIN 1.0
// Use it for Testing or Development purposes. NEVER for production machine.
#define DUMMY_THERMISTOR_998_VALUE 25
#define DUMMY_THERMISTOR_999_VALUE 25
//Show Temperature ADC value
//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
//#define SHOW_TEMP_ADC_VALUES
/*****************************************************************************************************/
/***********************************************************************
************************* Temperature limits ***************************
***********************************************************************/
// Hotend temperature must be close to target for this long before M109 returns success
#define TEMP_RESIDENCY_TIME 10 // (seconds)
#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one
#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early.
// Bed temperature must be close to target for this long before M190 returns success
#define TEMP_BED_RESIDENCY_TIME 0 // (seconds)
#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one
#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early.
// When temperature exceeds max temp, your heater will be switched off.
// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure!
// You should use MINTEMP for thermistor short/failure protection.
#define HEATER_0_MAXTEMP 275 // (degC)
#define HEATER_1_MAXTEMP 275 // (degC)
#define HEATER_2_MAXTEMP 275 // (degC)
#define HEATER_3_MAXTEMP 275 // (degC)
#define BED_MAXTEMP 150 // (degC)
// The minimal temperature defines the temperature below which the heater will not be enabled It is used
// to check that the wiring to the thermistor is not broken.
// Otherwise this would lead to the heater being powered on all the time.
#define HEATER_0_MINTEMP 5 // (degC)
#define HEATER_1_MINTEMP 5 // (degC)
#define HEATER_2_MINTEMP 5 // (degC)
#define HEATER_3_MINTEMP 5 // (degC)
#define BED_MINTEMP 5 // (degC)
//Preheat Constants
#define PLA_PREHEAT_HOTEND_TEMP 190
#define PLA_PREHEAT_HPB_TEMP 60
#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
#define ABS_PREHEAT_HOTEND_TEMP 240
#define ABS_PREHEAT_HPB_TEMP 100
#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
#define GUM_PREHEAT_HOTEND_TEMP 230
#define GUM_PREHEAT_HPB_TEMP 60
#define GUM_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
/*****************************************************************************************************/
#endif
MK/Configuration_Core.h
View file @ 184769cb
......@@ -239,7 +239,7 @@
/*****************************************************************************************
************************************** MBL or ABL ***************************************
/*****************************************************************************************
*****************************************************************************************
* *
* Manual Bed Leveling (MBL) or Auto Bed Leveling (ABL) settings *
* Set the rectangle in which to probe in MBL or ABL. *
......@@ -456,4 +456,4 @@
#define HOTEND_OFFSET_Z {0.0, 0.0, 0.0, 0.0} // (in mm) for each hotend, offset of the hotend on the Z axis
/*****************************************************************************************/
#endif
\ No newline at end of file
#endif
MK/Configuration_Feature.h
View file @ 184769cb
This diff is collapsed.
MK/Configuration_Laser.h 0 → 100644
View file @ 184769cb
#ifndef CONFIGURATION_LASER
#define CONFIGURATION_LASER
//===========================================================================
//============================= Laser Settings ==============================
//===========================================================================
// The following define selects how to control the laser.
// Please choose the one that matches your setup.
// 1 = Single pin control - LOW when off, HIGH when on, PWM to adjust intensity
// 2 = Two pin control - A firing pin for which LOW = off, HIGH = on, and a seperate intensity pin which carries a constant PWM signal and adjusts duty cycle to control intensity
#define LASER_CONTROL 1
// The following define to use the new HakanBasted laser_pulse method to fire laser. It should be more efficient, but it's less tested.
// Thanks for it to HakanBastedt that has implemented it for Marlin at https://github.com/HakanBastedt/Marlin
// Uncomment to enable it *USE AT YOUR OWN RISK*, it should work but it's *NOT WELL TESTED YET*
//#define LASER_PULSE_METHOD
// If your machine has laser focuser, set this to true and it will use Z axis for focus or disable it.
#define LASER_HAS_FOCUS false
//// In the case that the laserdriver need at least a certain level "LASER_REMAP_INTENSITY"
// to give anything, the intensity can be remapped to start at "LASER_REMAP_INTENSITY"
// At least some CO2-drivers need it, not sure about laserdiode drivers.
#define LASER_REMAP_INTENSITY 7
// Uncomment the following if your laser firing pin (not the PWM pin) for two pin control requires a HIGH signal to fire rather than a low (eg Red Sail M300 RS 3040)
// #define HIGH_TO_FIRE
// The following defines select which G codes tell the laser to fire. It's OK to uncomment more than one.
#define LASER_FIRE_G1 10 // fire the laser on a G1 move, extinguish when the move ends
#define LASER_FIRE_SPINDLE 11 // fire the laser on M3, extinguish on M5
#define LASER_FIRE_E 12 // fire the laser when the E axis moves
// Raster mode enables the laser to etch bitmap data at high speeds. Increases command buffer size substantially.
#define LASER_RASTER
#define LASER_MAX_RASTER_LINE 68 // Maximum number of base64 encoded pixels per raster gcode command
#define LASER_RASTER_ASPECT_RATIO 1 // pixels aren't square on most displays, 1.33 == 4:3 aspect ratio.
#define LASER_RASTER_MM_PER_PULSE 0.2 // Can be overridden by providing an R value in M649 command : M649 S17 B2 D0 R0.1 F4000
// Uncomment the following if the laser cutter is equipped with a peripheral relay board
// to control power to an exhaust fan, cooler pump, laser power supply, etc.
//#define LASER_PERIPHERALS
//#define LASER_PERIPHERALS_TIMEOUT 30000 // Number of milliseconds to wait for status signal from peripheral control board
// Uncomment the following line to enable cubic bezier curve movement with the G5 code
// #define G5_BEZIER
// Uncomment these options for the Buildlog.net laser cutter, and other similar models
#define LASER_WATTS 40.0
#define LASER_DIAMETER 0.1 // milimeters
#define LASER_PWM 50000 // hertz
#define LASER_FOCAL_HEIGHT 74.50 // z axis position at which the laser is focused
#endif
MK/Configuration_Pins.h
View file @ 184769cb
......@@ -64,18 +64,22 @@
#define Z_MAX_PIN ORIG_Z_MAX_PIN
// HEATER pin
#define HEATER_0_PIN ORIG_HEATER_0_PIN
#define HEATER_1_PIN ORIG_HEATER_1_PIN
#define HEATER_2_PIN ORIG_HEATER_2_PIN
#define HEATER_3_PIN ORIG_HEATER_3_PIN
#define HEATER_BED_PIN ORIG_HEATER_BED_PIN
#define HEATER_0_PIN ORIG_HEATER_0_PIN
#define HEATER_1_PIN ORIG_HEATER_1_PIN
#define HEATER_2_PIN ORIG_HEATER_2_PIN
#define HEATER_3_PIN ORIG_HEATER_3_PIN
#define HEATER_BED_PIN ORIG_HEATER_BED_PIN
#define HEATER_CHAMBER_PIN -1
#define COOLER_PIN -1
// TEMP pin
#define TEMP_0_PIN ORIG_TEMP_0_PIN
#define TEMP_1_PIN ORIG_TEMP_1_PIN
#define TEMP_2_PIN ORIG_TEMP_2_PIN
#define TEMP_3_PIN ORIG_TEMP_3_PIN
#define TEMP_BED_PIN ORIG_TEMP_BED_PIN
#define TEMP_0_PIN ORIG_TEMP_0_PIN
#define TEMP_1_PIN ORIG_TEMP_1_PIN
#define TEMP_2_PIN ORIG_TEMP_2_PIN
#define TEMP_3_PIN ORIG_TEMP_3_PIN
#define TEMP_BED_PIN ORIG_TEMP_BED_PIN
#define TEMP_CHAMBER_PIN -1
#define TEMP_COOLER_PIN -1
// FAN pin
#define FAN_PIN ORIG_FAN_PIN
......@@ -104,8 +108,12 @@
#endif
#if ENABLED(LASERBEAM)
#define LASER_PWR_PIN -1
#define LASER_TTL_PIN -1
#define LASER_PWR_PIN -1
#define LASER_TTL_PIN -1
#if ENABLED(LASER_PERIPHERALS)
#define LASER_PERIPHERALS_PIN -1
#define LASER_PERIPHERALS_STATUS_PIN -1
#endif
#endif
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
......@@ -116,6 +124,10 @@
#define FILWIDTH_PIN -1
#endif
#if ENABLED(FLOWMETER_SENSOR)
#define FLOWMETER_PIN -1
#endif
#if ENABLED(POWER_CONSUMPTION)
#define POWER_CONSUMPTION_PIN -1
#endif
......
MK/Configuration_Store.cpp
View file @ 184769cb
......@@ -95,6 +95,10 @@
*
* PIDTEMPBED:
* M304 PID bedKp, bedKi, bedKd
* PIDTEMPCHAMBER
* M305 PID chamberKp, chamberKi, chamberKd
* PIDTEMPCOOLER
* M306 PID coolerKp, coolerKi, coolerKd
*
* DOGLCD:
* M250 C lcd_contrast
......@@ -232,6 +236,18 @@ void Config_StoreSettings() {
EEPROM_WRITE_VAR(i, bedKd);
#endif
#if ENABLED(PIDTEMPCHAMBER)
EEPROM_WRITE_VAR(i, chamberKp);
EEPROM_WRITE_VAR(i, chamberKi);
EEPROM_WRITE_VAR(i, chamberKd);
#endif
#if ENABLED(PIDTEMPCOOLER)
EEPROM_WRITE_VAR(i, coolerKp);
EEPROM_WRITE_VAR(i, coolerKi);
EEPROM_WRITE_VAR(i, coolerKd);
#endif
#if HASNT(LCD_CONTRAST)
const int lcd_contrast = 32;
#endif
......@@ -381,6 +397,18 @@ void Config_RetrieveSettings() {
EEPROM_READ_VAR(i, bedKd);
#endif
#if ENABLED(PIDTEMPCHAMBER)
EEPROM_READ_VAR(i, chamberKp);
EEPROM_READ_VAR(i, chamberKi);
EEPROM_READ_VAR(i, chamberKd);
#endif
#if ENABLED(PIDTEMPCOOLER)
EEPROM_READ_VAR(i, coolerKp);
EEPROM_READ_VAR(i, coolerKi);
EEPROM_READ_VAR(i, coolerKd);
#endif
#if HASNT(LCD_CONTRAST)
int lcd_contrast;
#endif
......@@ -575,6 +603,18 @@ void Config_ResetDefault() {
bedKd = scalePID_d(DEFAULT_bedKd);
#endif
#if ENABLED(PIDTEMPCHAMBER)
chamberKp = DEFAULT_chamberKp;
chamberKi = scalePID_i(DEFAULT_chamberKi);
chamberKd = scalePID_d(DEFAULT_chamberKd);
#endif
#if ENABLED(PIDTEMPCOOLER)
coolerKp = DEFAULT_coolerKp;
coolerKi = scalePID_i(DEFAULT_coolerKi);
coolerKd = scalePID_d(DEFAULT_coolerKd);
#endif
#if ENABLED(FWRETRACT)
autoretract_enabled = false;
retract_length = RETRACT_LENGTH;
......@@ -777,7 +817,7 @@ void Config_ResetDefault() {
ECHO_EM(" (Material GUM)");
#endif // ULTIPANEL
#if ENABLED(PIDTEMP) || ENABLED(PIDTEMPBED)
#if ENABLED(PIDTEMP) || ENABLED(PIDTEMPBED) || ENABLED(PIDTEMPCHAMBER) || ENABLED(PIDTEMPCOOLER)
if (!forReplay) {
ECHO_LM(CFG, "PID settings:");
}
......@@ -797,10 +837,21 @@ void Config_ResetDefault() {
#endif
#endif
#if ENABLED(PIDTEMPBED)
ECHO_SMV(CFG, " M304 P", bedKp); // for compatibility with hosts, only echos values for E0
ECHO_SMV(CFG, " M304 P", bedKp);
ECHO_MV(" I", unscalePID_i(bedKi));
ECHO_EMV(" D", unscalePID_d(bedKd));
#endif
#if ENABLED(PIDTEMPCHAMBER)
ECHO_SMV(CFG, " M305 P", chamberKp);
ECHO_MV(" I", unscalePID_i(chamberKi));
ECHO_EMV(" D", unscalePID_d(chamberKd));
#endif
#if ENABLED(PIDTEMPCOOLER)
ECHO_SMV(CFG, " M306 P", coolerKp);
ECHO_MV(" I", unscalePID_i(coolerKi));
ECHO_EMV(" D", unscalePID_d(coolerKd));
#endif
#endif
#if ENABLED(FWRETRACT)
......
MK/Configuration_Temperature.h 0 → 100644
View file @ 184769cb
This diff is collapsed.
MK/Configuration_Version.h
View file @ 184769cb
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* MK & MK4due 3D Printer Firmware
*
* Based on Sprinter and grbl.
* Based on Marlin, Sprinter and grbl
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (C) 2013 - 2016 Alberto Cotronei @MagoKimbra
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -12,11 +12,11 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
......@@ -24,7 +24,7 @@
#define CONFIGURATION_VERSION_H
#define FIRMWARE_NAME "MK"
#define SHORT_BUILD_VERSION "4.2.82_dev"
#define SHORT_BUILD_VERSION "4.2.83_dev"
#define BUILD_VERSION FIRMWARE_NAME "_" SHORT_BUILD_VERSION
#define STRING_DISTRIBUTION_DATE __DATE__ " " __TIME__ // build date and time
// It might also be appropriate to define a location where additional information can be found
......
MK/MK.ino
View file @ 184769cb
......@@ -35,13 +35,14 @@
* "G" Codes
*
* G0 -> G1
* G1 - Coordinated Movement X Y Z E
* G1 - Coordinated Movement X Y Z E F(feedrate) P(Purge)
* G2 - CW ARC
* G3 - CCW ARC
* G4 - Dwell S<seconds> or P<milliseconds>
* G4 - Dwell S[seconds] or P[milliseconds], delay in Second or Millisecond
* G7 - Laser raster base64
* G10 - retract filament according to settings of M207
* G11 - retract recover filament according to settings of M208
* G28 - Home one or more axes
* G28 - X Y Z Home all Axis. M for bed manual setting with LCD. B return to back point
* G29 - Detailed Z-Probe, probes the bed at 3 or more points. Will fail if you haven't homed yet.
* G30 - Single Z Probe, probes bed at current XY location. - Bed Probe and Delta geometry Autocalibration
* G31 - Dock sled (Z_PROBE_SLED only)
......@@ -96,15 +97,15 @@
* M98 - Print Hysteresis value
* M99 - Set Hysteresis parameter M99 X<in mm> Y<in mm> Z<in mm> E<in mm>
* M100 - Watch Free Memory (For Debugging Only)
* M104 - Set extruder target temp
* M104 - Set hotend target temp
* M105 - Read current temp
* M106 - Fan on
* M107 - Fan off
* M109 - Sxxx Wait for extruder current temp to reach target temp. Waits only when heating
* Rxxx Wait for extruder current temp to reach target temp. Waits when heating and cooling
* M109 - Sxxx Wait for hotend current temp to reach target temp. Waits only when heating
* Rxxx Wait for hotend current temp to reach target temp. Waits when heating and cooling
* IF AUTOTEMP is enabled, S<mintemp> B<maxtemp> F<factor>. Exit autotemp by any M109 without F
* M110 - Set the current line number
* M111 - Set debug flags with S<mask>. See flag bits defined in Marlin.h.
* M111 - Set debug flags with S<mask>.
* M112 - Emergency stop
* M114 - Output current position to serial port
* M115 - Capabilities string
......@@ -117,7 +118,9 @@
* M127 - Solenoid Air Valve Closed (BariCUDA vent to atmospheric pressure by jmil)
* M128 - EtoP Open (BariCUDA EtoP = electricity to air pressure transducer by jmil)
* M129 - EtoP Closed (BariCUDA EtoP = electricity to air pressure transducer by jmil)
* M140 - Set bed target temp
* M140 - Set hot bed target temp
* M141 - Set hot chamber target temp
* M142 - Set cooler target temp
* M145 - Set the heatup state H<hotend> B<bed> F<fan speed> for S<material> (0=PLA, 1=ABS)
* M150 - Set BlinkM Color Output R: Red<0-255> U(!): Green<0-255> B: Blue<0-255> over i2c, G for green does not work.
* M163 - Set a single proportion for a mixing extruder. Requires COLOR_MIXING_EXTRUDER.
......@@ -125,6 +128,10 @@
* M165 - Set the proportions for a mixing extruder. Use parameters ABCDHI to set the mixing factors. Requires COLOR_MIXING_EXTRUDER.
* M190 - Sxxx Wait for bed current temp to reach target temp. Waits only when heating
* Rxxx Wait for bed current temp to reach target temp. Waits when heating and cooling
* M191 - Sxxx Wait for chamber current temp to reach target temp. Waits only when heating
* Rxxx Wait for chamber current temp to reach target temp. Waits when heating and cooling
* M192 - Sxxx Wait for cooler current temp to reach target temp. Waits only when heating
* Rxxx Wait for cooler current temp to reach target temp. Waits when heating and cooling
* M200 - set filament diameter and set E axis units to cubic millimeters (use S0 to set back to millimeters).:D<millimeters>-
* M201 - Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000)
* M202 - Set max acceleration in units/s^2 for travel moves (M202 X1000 Y1000) Unused in Marlin!!
......@@ -137,8 +144,8 @@
* M209 - S<1=true/0=false> enable automatic retract detect if the slicer did not support G10/11: every normal extrude-only move will be classified as retract depending on the direction.
* M218 - Set hotend offset (in mm): T<extruder_number> X<offset_on_X> Y<offset_on_Y>
* M220 - Set speed factor override percentage: S<factor in percent>
* M221 - Set extrude factor override percentage: S<factor in percent>
* M222 - Set density extrusion percentage for purge: S<factor in percent>
* M221 - T<extruder> S<factor in percent> - set extrude factor override percentage
* M222 - T<extruder> S<factor in percent> - set density extrude factor percentage for purge
* M226 - Wait until the specified pin reaches the state required: P<pin number> S<pin state>
* M240 - Trigger a camera to take a photograph
* M250 - Set LCD contrast C<contrast value> (value 0..63)
......@@ -147,7 +154,9 @@
* M301 - Set PID parameters P I D and C
* M302 - Allow cold extrudes, or set the minimum extrude S<temperature>.
* M303 - PID relay autotune S<temperature> sets the target temperature (default target temperature = 150C). H<hotend> C<cycles> U<Apply result>
* M304 - Set bed PID parameters P I and D
* M304 - Set hot bed PID parameters P I and D
* M305 - Set hot chamber PID parameters P I and D
* M306 - Set cooler PID parameters P I and D
* M350 - Set microstepping mode.
* M351 - Toggle MS1 MS2 pins directly.
* M380 - Activate solenoid on active extruder
......
MK/base.h
View file @ 184769cb
......@@ -35,9 +35,18 @@
#include "Configuration_Scara.h"
#endif
#include "Configuration_Temperature.h"
#include "Configuration_Feature.h"
#include "Configuration_Overall.h"
#if ENABLED(LASERBEAM)
#include "Configuration_Laser.h"
#if ENABLED(LASER_RASTER)
#include "module/laser/base64/base64.h"
#endif
#include "module/laser/laser.h"
#endif
#include "module/conditionals.h"
#include "module/sanitycheck.h"
#include "module/HAL/HAL.h"
......@@ -56,6 +65,7 @@
#include "module/motion/qr_solve.h"
#include "module/motion/cartesian_correction.h"
#include "module/temperature/temperature.h"
#include "module/sensor/flowmeter.h"
#include "module/temperature/thermistortables.h"
#include "module/lcd/ultralcd.h"
#include "module/lcd/buzzer.h"
......
MK/module/HAL/HAL.h
View file @ 184769cb
......@@ -32,11 +32,11 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*
* Description: *** HAL for Arduino ***
......@@ -92,16 +92,16 @@
inline void protect() {
cli();
}
inline void unprotect() {
SREG = sreg;
}
inline InterruptProtectedBlock(bool later = false) {
sreg = SREG;
if (!later) cli();
}
inline ~InterruptProtectedBlock() {
SREG = sreg;
}
......
MK/module/HAL/HardwareSerial.h
View file @ 184769cb
/*
HardwareSerial.h - Hardware serial library for Wiring
Copyright (c) 2006 Nicholas Zambetti. All right reserved.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Modified 28 September 2010 by Mark Sproul
*/
/**
* MK & MK4due 3D Printer Firmware
*
* Based on Marlin, Sprinter and grbl
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (C) 2013 - 2016 Alberto Cotronei @MagoKimbra
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* HardwareSerial.h - Hardware serial library for Wiring
* Copyright (c) 2006 Nicholas Zambetti. All right reserved.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Modified 28 September 2010 by Mark Sproul
* Modified 3 March 2015 by MagoKimbra
*/
#ifndef HardwareSerial_H
#define HardwareSerial_H
......
MK/module/HAL/fastio.h
View file @ 184769cb
......@@ -12,11 +12,11 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
......
MK/module/MK_Main.cpp
View file @ 184769cb
This diff is collapsed.
MK/module/MK_Main.h
View file @ 184769cb
......@@ -116,7 +116,7 @@ inline void refresh_cmd_timeout() { previous_cmd_ms = millis(); }
extern void delay_ms(millis_t ms);
#if ENABLED(FAST_PWM_FAN)
#if ENABLED(FAST_PWM_FAN) || ENABLED(FAST_PWM_COOLER)
void setPwmFrequency(uint8_t pin, uint8_t val);
#endif
......@@ -236,10 +236,6 @@ extern int fanSpeed;
extern bool allow_lengthy_extrude_once; // for load/unload
#endif
#if ENABLED(LASERBEAM)
extern int laser_ttl_modulation;
#endif
// Print job timer
extern PrintCounter print_job_counter;
......@@ -261,6 +257,18 @@ extern uint8_t active_driver;
void print_heaterstates();
#endif
#if HAS(TEMP_CHAMBER)
void print_chamberstate();
#endif
#if HAS(TEMP_COOLER)
void print_coolerstate();
#endif
#if ENABLED(FLOWMETER_SENSOR)
void print_flowratestate();
#endif
#if ENABLED(FIRMWARE_TEST)
void FirmwareTest();
#endif
......
MK/module/boards/403.h
View file @ 184769cb
......@@ -13,7 +13,9 @@
#if MB(RAMPS_FD_V1)
#define RAMPS_FD_V1
#define INVERTED_HEATER_PINS
#define INVERTED_BED_PINS
#define INVERTED_BED_PIN
#define INVERTED_CHAMBER_PIN
#define INVERTED_COOLER_PIN
// No EEPROM
// Use 4k7 thermistor tables
#else
......
MK/module/boards/404.h
View file @ 184769cb
......@@ -13,7 +13,9 @@
#if MB(RAMPS_FD_V1)
#define RAMPS_FD_V1
#define INVERTED_HEATER_PINS
#define INVERTED_BED_PINS
#define INVERTED_BED_PIN
#define INVERTED_CHAMBER_PIN
#define INVERTED_COOLER_PIN
// No EEPROM
// Use 4k7 thermistor tables
#else
......
MK/module/conditionals.h
View file @ 184769cb
......@@ -605,6 +605,32 @@
#define BED_USES_THERMISTOR
#endif
#if TEMP_SENSOR_CHAMBER == -1
#define CHAMBER_USES_AD595
#elif TEMP_SENSOR_CHAMBER == 0
#undef CHAMBER_MINTEMP
#undef CHAMBER_MAXTEMP
#elif TEMP_SENSOR_CHAMBER > 0
#define THERMISTORCHAMBER TEMP_SENSOR_CHAMBER
#define CHAMBER_USES_THERMISTOR
#endif
#if TEMP_SENSOR_COOLER == -1
#define COOLER_USES_AD595
#elif TEMP_SENSOR_COOLER == 0
#undef COOLER_MINTEMP
#undef COOLER_MAXTEMP
#elif TEMP_SENSOR_COOLER > 0
#define THERMISTORCOOLER TEMP_SENSOR_COOLER
#define COOLER_USES_THERMISTOR
#endif
#if HASNT(COOLER)
#if ENABLED(PIDTEMPCOOLER)
#undef PIDTEMPCOOLER
#endif
#endif
#define HEATER_USES_AD595 (ENABLED(HEATER_0_USES_AD595) || ENABLED(HEATER_1_USES_AD595) || ENABLED(HEATER_2_USES_AD595) || ENABLED(HEATER_3_USES_AD595))
/**
......@@ -612,6 +638,7 @@
*/
#define HAS_PID_HEATING (ENABLED(PIDTEMP) || ENABLED(PIDTEMPBED))
#define HAS_PID_FOR_BOTH (ENABLED(PIDTEMP) && ENABLED(PIDTEMPBED))
#define HAS_PID_COOLING (ENABLED(PIDTEMPCOOLER))
/**
* ARRAY_BY_EXTRUDERS based on EXTRUDERS
......@@ -661,11 +688,15 @@
#define HAS_TEMP_2 (PIN_EXISTS(TEMP_2) && TEMP_SENSOR_2 != 0)
#define HAS_TEMP_3 (PIN_EXISTS(TEMP_3) && TEMP_SENSOR_3 != 0)
#define HAS_TEMP_BED (PIN_EXISTS(TEMP_BED) && TEMP_SENSOR_BED != 0)
#define HAS_TEMP_CHAMBER (PIN_EXISTS(TEMP_CHAMBER) && TEMP_SENSOR_CHAMBER != 0)
#define HAS_TEMP_COOLER (PIN_EXISTS(TEMP_COOLER) && TEMP_SENSOR_COOLER != 0)
#define HAS_HEATER_0 (PIN_EXISTS(HEATER_0))
#define HAS_HEATER_1 (PIN_EXISTS(HEATER_1))
#define HAS_HEATER_2 (PIN_EXISTS(HEATER_2))
#define HAS_HEATER_3 (PIN_EXISTS(HEATER_3))
#define HAS_HEATER_BED (PIN_EXISTS(HEATER_BED))
#define HAS_HEATER_CHAMBER (PIN_EXISTS(HEATER_CHAMBER))
#define HAS_COOLER (PIN_EXISTS(COOLER))
#define HAS_AUTO_FAN_0 (ENABLED(EXTRUDER_AUTO_FAN) && PIN_EXISTS(EXTRUDER_0_AUTO_FAN))
#define HAS_AUTO_FAN_1 (ENABLED(EXTRUDER_AUTO_FAN) && PIN_EXISTS(EXTRUDER_1_AUTO_FAN))
#define HAS_AUTO_FAN_2 (ENABLED(EXTRUDER_AUTO_FAN) && PIN_EXISTS(EXTRUDER_2_AUTO_FAN))
......@@ -790,12 +821,26 @@
#define WRITE_HEATER_0(v) WRITE_HEATER_0P(v)
#endif
#if HAS(HEATER_BED)
#if ENABLED(INVERTED_BED_PINS)
#if ENABLED(INVERTED_BED_PIN)
#define WRITE_HEATER_BED(v) WRITE(HEATER_BED_PIN,!v)
#else
#define WRITE_HEATER_BED(v) WRITE(HEATER_BED_PIN,v)
#endif
#endif
#if HAS(HEATER_CHAMBER)
#if ENABLED(INVERTED_CHAMBER_PIN)
#define WRITE_HEATER_CHAMBER(v) WRITE(HEATER_CHAMBER_PIN,!v)
#else
#define WRITE_HEATER_CHAMBER(v) WRITE(HEATER_CHAMBER_PIN,v)
#endif
#endif
#if HAS(COOLER)
#if ENABLED(INVERTED_COOLER_PIN)
#define WRITE_COOLER(v) WRITE(COOLER_PIN,!v)
#else
#define WRITE_COOLER(v) WRITE(COOLER_PIN,v)
#endif
#endif
#if HAS(FAN)
#if ENABLED(INVERTED_HEATER_PINS)
#define WRITE_FAN(v) WRITE(FAN_PIN, !v)
......
MK/module/language/language.h
View file @ 184769cb
......@@ -94,7 +94,6 @@
#define SERIAL_INVALID_HOTEND "Invalid hotend"
#define SERIAL_INVALID_SOLENOID "Invalid solenoid"
#define SERIAL_ERR_NO_THERMISTORS "No thermistors - no temperature"
#define SERIAL_COUNT_X " Count X: "
#define SERIAL_ERR_KILLED "Printer halted. kill() called!"
#define SERIAL_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
#define SERIAL_BUSY_PROCESSING "processing"
......@@ -168,8 +167,9 @@
#define SERIAL_PID_AUTOTUNE "PID Autotune"
#define SERIAL_PID_AUTOTUNE_START SERIAL_PID_AUTOTUNE " start"
#define SERIAL_PID_AUTOTUNE_FAILED SERIAL_PID_AUTOTUNE " failed!"
#define SERIAL_PID_BAD_EXTRUDER_NUM SERIAL_PID_AUTOTUNE_FAILED " Bad extruder number"
#define SERIAL_PID_BAD_TEMP_CONTROLLER_NUM SERIAL_PID_AUTOTUNE_FAILED " Bad temperature controller number"
#define SERIAL_PID_TEMP_TOO_HIGH SERIAL_PID_AUTOTUNE_FAILED " Temperature too high"
#define SERIAL_PID_TEMP_TOO_LOW SERIAL_PID_AUTOTUNE_FAILED " Temperature too low"
#define SERIAL_PID_TIMEOUT SERIAL_PID_AUTOTUNE_FAILED " timeout"
#define SERIAL_BIAS " bias: "
#define SERIAL_D " d: "
......@@ -182,9 +182,11 @@
#define SERIAL_KI " Ki: "
#define SERIAL_KD " Kd: "
#define SERIAL_T " T:"
#define SERIAL_C " C:"
#define SERIAL_B " B:"
#define SERIAL_AT " @"
#define SERIAL_BAT " B@:"
#define SERIAL_CAT " C@:"
#define SERIAL_W " W:"
#define SERIAL_PID_AUTOTUNE_FINISHED SERIAL_PID_AUTOTUNE " finished! Put the last Kp, Ki and Kd constants from above into Configuration.h or send command M500 for save in EEPROM the new value!"
#define SERIAL_PID_DEBUG " PID_DEBUG "
......@@ -196,8 +198,10 @@
#define SERIAL_PID_DEBUG_CTERM " cTerm "
#define SERIAL_INVALID_EXTRUDER_NUM " - Invalid extruder number !"
#define SERIAL_HEATER_BED "bed"
#define SERIAL_STOPPED_HEATER ", system stopped! Heater_ID: "
#define SERIAL_STOPPED_BED ", system stopped! Bed"
#define SERIAL_STOPPED_CHAMBER ", system stopped! Chamber"
#define SERIAL_STOPPED_COOLER ", system stopped! Cooler"
#define SERIAL_REDUNDANCY "Heater switched off. Temperature difference between temp sensors is too high !"
#define SERIAL_T_HEATING_FAILED "Heating failed"
#define SERIAL_T_THERMAL_RUNAWAY "Thermal Runaway"
......@@ -228,6 +232,8 @@
#define SERIAL_BED_LEVELLING_Y " Y: "
#define SERIAL_BED_LEVELLING_Z " Z: "
#define MSG_COOLER "Cooler"
// LCD Menu Messages
#define LANGUAGE_INCL_(M) STRINGIFY_(language_##M.h)
......
MK/module/language/language_an.h
View file @ 184769cb
......@@ -181,6 +181,8 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "hours"
#define MSG_END_MINUTE "minutes"
......@@ -218,6 +220,9 @@
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
#define MSG_CONFIG "Configuration"
......
MK/module/language/language_bg.h
View file @ 184769cb
......@@ -181,6 +181,8 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "часа"
#define MSG_END_MINUTE "минути"
......@@ -218,6 +220,9 @@
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
#define MSG_CONFIG "Configuration"
......
MK/module/language/language_ca.h
View file @ 184769cb
......@@ -181,6 +181,8 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "hours"
#define MSG_END_MINUTE "minutes"
......@@ -218,6 +220,9 @@
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
#define MSG_CONFIG "Configuration"
......
MK/module/language/language_cn.h
View file @ 184769cb
......@@ -181,6 +181,8 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "hours"
#define MSG_END_MINUTE "minutes"
......@@ -218,6 +220,10 @@
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
#define MSG_CONFIG "Configuration"
......
MK/module/language/language_cz.h
View file @ 184769cb
......@@ -183,6 +183,8 @@
#define MSG_ERR_MINTEMP "Chyba: NIZKA TEPLOTA"
#define MSG_ERR_MAXTEMP_BED "Chyba: VYSOKA TEPLOTA PODL."
#define MSG_ERR_MINTEMP_BED "Chyba: NIZKA TEPLOTA PODL."
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "hod"
#define MSG_END_MINUTE "min"
......@@ -220,6 +222,9 @@
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
#define MSG_CONFIG "Configuration"
......
MK/module/language/language_da.h
View file @ 184769cb
......@@ -181,6 +181,8 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "timer"
#define MSG_END_MINUTE "minutter"
......@@ -217,6 +219,9 @@
#define MSG_HEATING_COMPLETE "Opvarmet"
#define MSG_BED_HEATING "Opvarmer plade"
#define MSG_BED_DONE "Plade opvarmet"
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
......
MK/module/language/language_de.h
View file @ 184769cb
......@@ -181,6 +181,8 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "tage"
#define MSG_END_HOUR "uur"
#define MSG_END_MINUTE "minuten"
......@@ -217,6 +219,9 @@
#define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
......
MK/module/language/language_en.h
View file @ 184769cb
......@@ -184,6 +184,10 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_CHAMBER "MAXTEMP CHAMBER ERROR"
#define MSG_ERR_MINTEMP_CHAMBER "MINTEMP CHAMBER ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "hours"
#define MSG_END_MINUTE "minutes"
......@@ -244,6 +248,9 @@
#define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
......
MK/module/language/language_es.h
View file @ 184769cb
......@@ -181,6 +181,8 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "hours"
#define MSG_END_MINUTE "minutes"
......@@ -217,6 +219,9 @@
#define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
......
MK/module/language/language_eu.h
View file @ 184769cb
......@@ -181,6 +181,8 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "hours"
#define MSG_END_MINUTE "minutes"
......@@ -217,6 +219,9 @@
#define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
......
MK/module/language/language_fi.h
View file @ 184769cb
......@@ -181,6 +181,8 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "hours"
#define MSG_END_MINUTE "minutes"
......@@ -217,6 +219,9 @@
#define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
......
MK/module/language/language_fr.h
View file @ 184769cb
......@@ -181,6 +181,8 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "heures"
#define MSG_END_MINUTE "minutes"
......@@ -217,6 +219,9 @@
#define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
......
MK/module/language/language_gl.h
View file @ 184769cb
......@@ -155,12 +155,17 @@
#define MSG_ERR_MINTEMP "Err: temp. min."
#define MSG_ERR_MAXTEMP_BED "Err: MAXTEMP BED"
#define MSG_ERR_MINTEMP_BED "Err: MINTEMP BED"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_HOUR "horas"
#define MSG_END_MINUTE "minutos"
#define MSG_HEATING "Quentando..."
#define MSG_HEATING_COMPLETE "Xa esta quente"
#define MSG_BED_HEATING "Quentando cama"
#define MSG_BED_DONE "Cama esta quente"
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
#define MSG_DELTA_CALIBRATE "Calibracion Delta"
#define MSG_DELTA_CALIBRATE_X "Calibrar X"
......
MK/module/language/language_it.h
View file @ 184769cb
......@@ -181,6 +181,10 @@
#define MSG_ERR_MINTEMP "Err: TEMP MINIMA"
#define MSG_ERR_MAXTEMP_BED "Err: TEMP MASSIMA PIATTO"
#define MSG_ERR_MINTEMP_BED "Err: TEMP MINIMA PIATTO"
#define MSG_ERR_MAXTEMP_CHAMBER "MAXTEMP CHAMBER ERROR"
#define MSG_ERR_MINTEMP_CHAMBER "MINTEMP CHAMBER ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "giorni"
#define MSG_END_HOUR "ore"
#define MSG_END_MINUTE "minuti"
......@@ -241,6 +245,8 @@
#define MSG_HEATING_COMPLETE "Riscaldamento finito."
#define MSG_BED_HEATING "Riscaldamento piatto."
#define MSG_BED_DONE "Piatto riscaldato."
#define MSG_COOLER_COOLING "Raffreddamento..."
#define MSG_COOLER_DONE "Raffreddamento finito."
// Extra
#define MSG_LASER "Laser Preset"
......
MK/module/language/language_kana.h
View file @ 184769cb
......@@ -183,6 +183,8 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "hours"
#define MSG_END_MINUTE "minutes"
......@@ -219,6 +221,9 @@
#define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
......
MK/module/language/language_kana_utf8.h
View file @ 184769cb
......@@ -186,6 +186,8 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "hours"
#define MSG_END_MINUTE "minutes"
......@@ -222,6 +224,9 @@
#define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
......
MK/module/language/language_nl.h
View file @ 184769cb
......@@ -181,6 +181,8 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "hours"
#define MSG_END_MINUTE "minutes"
......@@ -217,6 +219,9 @@
#define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
......
MK/module/language/language_pl.h
View file @ 184769cb
......@@ -181,6 +181,8 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "hours"
#define MSG_END_MINUTE "minutes"
......@@ -217,6 +219,9 @@
#define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
......
MK/module/language/language_pt-br.h
View file @ 184769cb
......@@ -181,6 +181,8 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "hours"
#define MSG_END_MINUTE "minutes"
......@@ -217,6 +219,9 @@
#define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
......
MK/module/language/language_pt-br_utf8.h
View file @ 184769cb
......@@ -157,12 +157,17 @@
#define MSG_ERR_MINTEMP "Err: T Mínima"
#define MSG_ERR_MAXTEMP_BED "Err: T Base Máxima"
#define MSG_ERR_MINTEMP_BED "Err: T Base Mínima"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_HOUR "Horas"
#define MSG_END_MINUTE "Minutos"
#define MSG_HEATING "Aquecendo..."
#define MSG_HEATING_COMPLETE "Aquecida."
#define MSG_BED_HEATING "Aquecendo base.."
#define MSG_BED_DONE "Base aquecida."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
#define MSG_DELTA_CALIBRATE "Calibrar Delta"
#define MSG_DELTA_CALIBRATE_X "Calibrar X"
......
MK/module/language/language_pt.h
View file @ 184769cb
......@@ -181,6 +181,8 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "hours"
#define MSG_END_MINUTE "minutes"
......@@ -217,6 +219,9 @@
#define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
......
MK/module/language/language_pt_utf8.h
View file @ 184769cb
......@@ -161,12 +161,17 @@
#define MSG_ERR_MINTEMP "Err: T Mínima"
#define MSG_ERR_MAXTEMP_BED "Err: T Base Máxima"
#define MSG_ERR_MINTEMP_BED "Err: T Base Mínima"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_HOUR "horas"
#define MSG_END_MINUTE "minutos"
#define MSG_HEATING "Aquecendo..."
#define MSG_HEATING_COMPLETE "Aquecida."
#define MSG_BED_HEATING "Aquecendo base.."
#define MSG_BED_DONE "Base aquecida."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
#define MSG_DELTA_CALIBRATE "Calibração Delta"
#define MSG_DELTA_CALIBRATE_X "Calibrar X"
......
MK/module/language/language_ru.h
View file @ 184769cb
......@@ -181,6 +181,8 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "hours"
#define MSG_END_MINUTE "minutes"
......@@ -217,6 +219,9 @@
#define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
......
MK/module/laser/base64/base64.cpp 0 → 100644
View file @ 184769cb
/**
* MK & MK4due 3D Printer Firmware
*
* Based on Marlin, Sprinter and grbl
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (C) 2013 - 2016 Alberto Cotronei @MagoKimbra
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "base64.h"
const char b64_alphabet[] = "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
"abcdefghijklmnopqrstuvwxyz"
"0123456789+/";
/* 'Private' declarations */
inline void a3_to_a4(unsigned char * a4, unsigned char * a3);
inline void a4_to_a3(unsigned char * a3, unsigned char * a4);
inline unsigned char b64_lookup(char c);
int base64_encode(char *output, char *input, int inputLen) {
int i = 0, j = 0;
int encLen = 0;
unsigned char a3[3];
unsigned char a4[4];
while(inputLen--) {
a3[i++] = *(input++);
if(i == 3) {
a3_to_a4(a4, a3);
for(i = 0; i < 4; i++) {
output[encLen++] = b64_alphabet[a4[i]];
}
i = 0;
}
}
if(i) {
for(j = i; j < 3; j++) {
a3[j] = '\0';
}
a3_to_a4(a4, a3);
for(j = 0; j < i + 1; j++) {
output[encLen++] = b64_alphabet[a4[j]];
}
while((i++ < 3)) {
output[encLen++] = '=';
}
}
output[encLen] = '\0';
return encLen;
}
int base64_decode(unsigned char * output, char * input, int inputLen) {
int i = 0, j = 0;
int decLen = 0;
unsigned char a3[3];
unsigned char a4[4];
while (inputLen--) {
if(*input == '=') {
break;
}
a4[i++] = *(input++);
if (i == 4) {
for (i = 0; i <4; i++) {
a4[i] = b64_lookup(a4[i]);
}
a4_to_a3(a3,a4);
for (i = 0; i < 3; i++) {
output[decLen++] = a3[i];
}
i = 0;
}
}
if (i) {
for (j = i; j < 4; j++) {
a4[j] = '\0';
}
for (j = 0; j <4; j++) {
a4[j] = b64_lookup(a4[j]);
}
a4_to_a3(a3,a4);
for (j = 0; j < i - 1; j++) {
output[decLen++] = a3[j];
}
}
output[decLen] = '\0';
return decLen;
}
int base64_enc_len(int plainLen) {
int n = plainLen;
return (n + 2 - ((n + 2) % 3)) / 3 * 4;
}
int base64_dec_len(char * input, int inputLen) {
int i = 0;
int numEq = 0;
for(i = inputLen - 1; input[i] == '='; i--) {
numEq++;
}
return ((6 * inputLen) / 8) - numEq;
}
inline void a3_to_a4(unsigned char * a4, unsigned char * a3) {
a4[0] = (a3[0] & 0xfc) >> 2;
a4[1] = ((a3[0] & 0x03) << 4) + ((a3[1] & 0xf0) >> 4);
a4[2] = ((a3[1] & 0x0f) << 2) + ((a3[2] & 0xc0) >> 6);
a4[3] = (a3[2] & 0x3f);
}
inline void a4_to_a3(unsigned char * a3, unsigned char * a4) {
a3[0] = (a4[0] << 2) + ((a4[1] & 0x30) >> 4);
a3[1] = ((a4[1] & 0xf) << 4) + ((a4[2] & 0x3c) >> 2);
a3[2] = ((a4[2] & 0x3) << 6) + a4[3];
}
inline unsigned char b64_lookup(char c) {
if(c >='A' && c <='Z') return c - 'A';
if(c >='a' && c <='z') return c - 71;
if(c >='0' && c <='9') return c + 4;
if(c == '+') return 62;
if(c == '/') return 63;
return -1;
}
MK/module/laser/base64/base64.h 0 → 100644
View file @ 184769cb
/**
* MK & MK4due 3D Printer Firmware
*
* Based on Marlin, Sprinter and grbl
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (C) 2013 - 2016 Alberto Cotronei @MagoKimbra
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Copyright (c) 2013 Adam Rudd.
* See LICENSE for more information
*/
#ifndef _BASE64_H
#define _BASE64_H
/* b64_alphabet:
* Description: Base64 alphabet table, a mapping between integers
* and base64 digits
* Notes: This is an extern here but is defined in Base64.c
*/
extern const char b64_alphabet[];
/* base64_encode:
* Description:
* Encode a string of characters as base64
* Parameters:
* output: the output buffer for the encoding, stores the encoded string
* input: the input buffer for the encoding, stores the binary to be encoded
* inputLen: the length of the input buffer, in bytes
* Return value:
* Returns the length of the encoded string
* Requirements:
* 1. output must not be null or empty
* 2. input must not be null
* 3. inputLen must be greater than or equal to 0
*/
int base64_encode(char *output, char *input, int inputLen);
/* base64_decode:
* Description:
* Decode a base64 encoded string into bytes
* Parameters:
* output: the output buffer for the decoding,
* stores the decoded binary
* input: the input buffer for the decoding,
* stores the base64 string to be decoded
* inputLen: the length of the input buffer, in bytes
* Return value:
* Returns the length of the decoded string
* Requirements:
* 1. output must not be null or empty
* 2. input must not be null
* 3. inputLen must be greater than or equal to 0
*/
int base64_decode(unsigned char *output, char *input, int inputLen);
/* base64_enc_len:
* Description:
* Returns the length of a base64 encoded string whose decoded
* form is inputLen bytes long
* Parameters:
* inputLen: the length of the decoded string
* Return value:
* The length of a base64 encoded string whose decoded form
* is inputLen bytes long
* Requirements:
* None
*/
int base64_enc_len(int inputLen);
/* base64_dec_len:
* Description:
* Returns the length of the decoded form of a
* base64 encoded string
* Parameters:
* input: the base64 encoded string to be measured
* inputLen: the length of the base64 encoded string
* Return value:
* Returns the length of the decoded form of a
* base64 encoded string
* Requirements:
* 1. input must not be null
* 2. input must be greater than or equal to zero
*/
int base64_dec_len(char *input, int inputLen);
#endif // _BASE64_H
MK/module/laser/laser.cpp 0 → 100644
View file @ 184769cb
This diff is collapsed.
MK/module/laser/laser.h 0 → 100644
View file @ 184769cb
/**
* MK & MK4due 3D Printer Firmware
*
* Based on Marlin, Sprinter and grbl
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (C) 2013 - 2016 Alberto Cotronei @MagoKimbra
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* laser.cpp - Laser control library for Arduino using 16 bit timers- Version 1
* Copyright (c) 2013 Timothy Schmidt. All right reserved.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 3 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef LASER_H
#define LASER_H
#include <inttypes.h>
// split into planned and status
typedef struct {
int fired; // method used to ask the laser to fire - LASER_FIRE_G1, LASER_FIRE_SPINDLE, LASER_FIRE_E, etc
float intensity; // Laser firing instensity 0.0 - 100.0
float ppm; // pulses per millimeter, for pulsed firing mode
unsigned long duration; // laser firing duration in microseconds, for pulsed firing mode
unsigned long dur; // instantaneous duration
bool status; // LASER_ON / LASER_OFF - buffered
bool firing; // LASER_ON / LASER_OFF - instantaneous
uint8_t mode; // CONTINUOUS, PULSED, RASTER
unsigned long last_firing; // microseconds since last laser firing
bool diagnostics; // Verbose debugging output over serial
unsigned int time; // temporary counter to limit eeprom writes
unsigned int lifetime; // laser lifetime firing counter in minutes
#if ENABLED(LASER_RASTER)
unsigned char raster_data[LASER_MAX_RASTER_LINE];
unsigned char rasterlaserpower;
float raster_aspect_ratio;
float raster_mm_per_pulse;
int raster_raw_length;
int raster_num_pixels;
bool raster_direction;
#endif // LASER_RASTER
} laser_t;
extern laser_t laser;
void laser_init();
void laser_fire(float intensity);
#if ENABLED(LASER_PULSE_METHOD)
void laser_pulse(uint32_t ulValue, unsigned long usec);
#endif
void laser_extinguish();
void laser_update_lifetime();
void laser_set_mode(int mode);
#if ENABLED(LASER_PERIPHERALS)
bool laser_peripherals_ok();
void laser_peripherals_on();
void laser_peripherals_off();
void laser_wait_for_peripherals();
#endif // LASER_PERIPHERALS
#ifdef HIGH_TO_FIRE // Some cutters fire on high, some on low.
#define LASER_ARM HIGH
#define LASER_UNARM LOW
#else
#define LASER_ARM LOW
#define LASER_UNARM HIGH
#endif
// Laser constants
#define LASER_OFF 0
#define LASER_ON 1
#define CONTINUOUS 0
#define PULSED 1
#define RASTER 2
#endif // LASER_H
MK/module/laser/laserbitmaps.h 0 → 100644
View file @ 184769cb
/**
* MK & MK4due 3D Printer Firmware
*
* Based on Marlin, Sprinter and grbl
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (C) 2013 - 2016 Alberto Cotronei @MagoKimbra
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#define LASERENABLE_HEIGHT 20
#define LASERENABLE_WIDTH 25
#define LASERENABLE_BYTEWIDTH 4
const unsigned char laserenable_bmp[] PROGMEM = {
0x00, 0x1c, 0x00, 0x00,
0x00, 0x3e, 0x00, 0x00,
0x00, 0x77, 0x00, 0x00,
0x00, 0x63, 0x00, 0x00,
0x00, 0xc1, 0x80, 0x00,
0x01, 0xc1, 0xc0, 0x00,
0x01, 0x88, 0xc0, 0x00,
0x03, 0x08, 0x60, 0x00,
0x07, 0x41, 0x70, 0x00,
0x06, 0x2a, 0x30, 0x00,
0x0c, 0x1c, 0x18, 0x00,
0x1d, 0xbf, 0xfc, 0x00,
0x18, 0x1c, 0x0c, 0x00,
0x30, 0x2a, 0x06, 0x00,
0x70, 0x41, 0x07, 0x00,
0x60, 0x88, 0x83, 0x00,
0xc0, 0x08, 0x01, 0x80,
0xc0, 0x00, 0x01, 0x80,
0xff, 0xff, 0xff, 0x80,
0x7f, 0xff, 0xff, 0x00
};
#define ICON_HEIGHT 13
#define ICON_WIDTH 12
#define ICON_BYTEWIDTH 2
const unsigned char laseron_bmp[] PROGMEM = {
0xff, 0xf0,
0x8f, 0x10,
0x8f, 0x10,
0x9f, 0x90,
0x9f, 0x90,
0x80, 0x10,
0x86, 0x10,
0x86, 0x10,
0xc6, 0x30,
0xa6, 0x50,
0x96, 0x90,
0xaf, 0x50,
0xff, 0xf0
};
const unsigned char laseroff_bmp[] PROGMEM = {
0xff, 0xf0,
0x8f, 0x10,
0x8f, 0x10,
0x9f, 0x90,
0x9f, 0x90,
0x80, 0x10,
0x80, 0x10,
0x80, 0x10,
0x80, 0x10,
0x80, 0x10,
0x80, 0x10,
0x80, 0x10,
0xff, 0xf0
};
const unsigned char lockicon_bmp[] PROGMEM = {
0x0f, 0x00,
0x19, 0x80,
0x30, 0xc0,
0x20, 0x40,
0x20, 0x40,
0x20, 0x40,
0x3f, 0xc0,
0x20, 0x40,
0x26, 0x40,
0x26, 0x40,
0x2f, 0x40,
0x20, 0x40,
0x3f, 0xc0
};
const unsigned char vacicon_bmp[] PROGMEM = {
0x06, 0x00,
0x06, 0x00,
0x06, 0x00,
0x0f, 0x00,
0x0f, 0x00,
0x1f, 0x80,
0x3f, 0xc0,
0xff, 0xf0,
0xff, 0xf0,
0xc0, 0x30,
0x16, 0x80,
0x29, 0x40,
0x50, 0xa0
};
const unsigned char airicon_bmp[] PROGMEM = {
0x32, 0xc0,
0x30, 0xc0,
0x34, 0xc0,
0x30, 0xc0,
0x32, 0xc0,
0x30, 0xc0,
0x34, 0xc0,
0x19, 0x80,
0x02, 0x00,
0x00, 0x00,
0x04, 0x00,
0x09, 0x00,
0x22, 0x40
};
const unsigned char watericon_bmp[] PROGMEM = {
0x02, 0x00,
0x07, 0x00,
0x05, 0x00,
0x0d, 0x80,
0x08, 0x80,
0x18, 0xc0,
0x10, 0x40,
0x30, 0x60,
0x38, 0x20,
0x3c, 0x60,
0x3f, 0xe0,
0x1f, 0xc0,
0x0f, 0x80
};
MK/module/macros.h
View file @ 184769cb
......@@ -21,61 +21,61 @@
*/
#ifndef MACROS_H
#define MACROS_H
#define MACROS_H
// Compiler warning on unused varable.
#define UNUSED(x) (void) (x)
// Compiler warning on unused varable.
#define UNUSED(x) (void) (x)
// Macros for bit masks
#ifndef _BV
#define _BV(b) (1<<(b))
#endif
#define TEST(n,b) (((n)&_BV(b))!=0)
#define SBI(n,b) (n |= _BV(b))
#define CBI(n,b) (n &= ~_BV(b))
#define SET_BIT(n,b,value) (n) ^= ((-value)^(n)) & (_BV(b))
// Macros for bit masks
#ifndef _BV
#define _BV(b) (1<<(b))
#endif
#define TEST(n,b) (((n)&_BV(b))!=0)
#define SBI(n,b) (n |= _BV(b))
#define CBI(n,b) (n &= ~_BV(b))
#define SET_BIT(n,b,value) (n) ^= ((-value)^(n)) & (_BV(b))
// Macros for maths shortcuts
#ifndef M_PI
#define M_PI 3.1415926536
#endif
#define RADIANS(d) ((d)*M_PI/180.0)
#define DEGREES(r) ((r)*180.0/M_PI)
#define SIN_60 0.8660254037844386
#define COS_60 0.5
// Macros for maths shortcuts
#ifndef M_PI
#define M_PI 3.1415926536
#endif
#define RADIANS(d) ((d)*M_PI/180.0)
#define DEGREES(r) ((r)*180.0/M_PI)
#define SIN_60 0.8660254037844386
#define COS_60 0.5
// Macros to support option testing
#define ENABLED defined
#define DISABLED !defined
// Macros to support option testing
#define ENABLED defined
#define DISABLED !defined
#define HAS(FE) (HAS_##FE)
#define HASNT(FE) (!(HAS_##FE))
#define HAS(FE) (HAS_##FE)
#define HASNT(FE) (!(HAS_##FE))
// Macros to contrain values
#define NUMERIC(a) ((a) >= '0' && '9' >= (a))
#define NUMERIC_SIGNED(a) (NUMERIC(a) || (a) == '-')
#define NOLESS(v,n) do{ if (v < n) v = n; }while(0)
#define NOMORE(v,n) do{ if (v > n) v = n; }while(0)
#define COUNT(a) (sizeof(a)/sizeof(*a))
// Macros to contrain values
#define NUMERIC(a) ((a) >= '0' && '9' >= (a))
#define NUMERIC_SIGNED(a) (NUMERIC(a) || (a) == '-')
#define NOLESS(v,n) do{ if (v < n) v = n; }while(0)
#define NOMORE(v,n) do{ if (v > n) v = n; }while(0)
#define COUNT(a) (sizeof(a)/sizeof(*a))
// Function macro
#define FORCE_INLINE __attribute__((always_inline)) inline
// Function macro
#define FORCE_INLINE __attribute__((always_inline)) inline
// Macro for debugging
#define DEBUGGING(F) (mk_debug_flags & (DEBUG_## F))
// Macro for debugging
#define DEBUGGING(F) (mk_debug_flags & (DEBUG_## F))
// Macro for String
#define STRINGIFY_(n) #n
#define STRINGIFY(n) STRINGIFY_(n)
// Macro for String
#define STRINGIFY_(n) #n
#define STRINGIFY(n) STRINGIFY_(n)
// Macro for varie
#define PIN_EXISTS(PN) (defined(PN##_PIN) && PN##_PIN >= 0)
// Macro for varie
#define PIN_EXISTS(PN) (defined(PN##_PIN) && PN##_PIN >= 0)
#define PENDING(NOW,SOON) ((long)(NOW-(SOON))<0)
#define ELAPSED(NOW,SOON) (!PENDING(NOW,SOON))
#define PENDING(NOW,SOON) ((long)(NOW-(SOON))<0)
#define ELAPSED(NOW,SOON) (!PENDING(NOW,SOON))
#define NOOP do{}while(0)
#define NOOP do{}while(0)
#define _AXIS(AXIS) AXIS ##_AXIS
#define _AXIS(AXIS) AXIS ##_AXIS
#endif //__MACROS_H
MK/module/mechanics.h
View file @ 184769cb
......@@ -21,18 +21,18 @@
*/
#ifndef MECHANICS_H
#define MECHANICS_H
#define MECHANICS_H
// Macros for mechanics type
#define MECH_UNKNOWN -1
#define MECH_CARTESIAN 0
#define MECH_COREXY 1
#define MECH_COREYX 2
#define MECH_COREXZ 8
#define MECH_COREZX 9
#define MECH_DELTA 3
#define MECH_SCARA 4
// Macros for mechanics type
#define MECH_UNKNOWN -1
#define MECH_CARTESIAN 0
#define MECH_COREXY 1
#define MECH_COREYX 2
#define MECH_COREXZ 8
#define MECH_COREZX 9
#define MECH_DELTA 3
#define MECH_SCARA 4
#define MECH(mech) (MECHANISM == MECH_##mech)
#define MECH(mech) (MECHANISM == MECH_##mech)
#endif
\ No newline at end of file
MK/module/motion/endstops.cpp
View file @ 184769cb
......@@ -162,6 +162,7 @@ void Endstops::report_state() {
card.closeFile();
quickStop();
disable_all_heaters(); // switch off all heaters.
disable_all_coolers();
}
#endif
}
......
MK/module/motion/planner.cpp
View file @ 184769cb
......@@ -417,9 +417,7 @@ void check_axes_activity() {
unsigned char tail_valve_pressure = ValvePressure,
tail_e_to_p_pressure = EtoPPressure;
#endif
#if ENABLED(LASERBEAM)
unsigned char tail_laser_ttl_modulation = laser_ttl_modulation;
#endif
block_t* block;
if (blocks_queued()) {
......@@ -430,9 +428,6 @@ void check_axes_activity() {
tail_valve_pressure = block->valve_pressure;
tail_e_to_p_pressure = block->e_to_p_pressure;
#endif
#if ENABLED(LASERBEAM)
tail_laser_ttl_modulation = block_buffer[block_index].laser_ttlmodulation;
#endif
while (block_index != block_buffer_head) {
block = &block_buffer[block_index];
......@@ -493,10 +488,6 @@ void check_axes_activity() {
#endif
#endif
// add Laser TTL Modulation(PWM) Control
#if ENABLED(LASERBEAM)
analogWrite(LASER_TTL_PIN, tail_laser_ttl_modulation);
#endif
}
float junction_deviation = 0.1;
......@@ -629,8 +620,10 @@ float junction_deviation = 0.1;
block->steps[E_AXIS] /= 100;
block->step_event_count = max(block->steps[X_AXIS], max(block->steps[Y_AXIS], max(block->steps[Z_AXIS], block->steps[E_AXIS])));
// Bail if this is a zero-length block
if (block->step_event_count <= DROP_SEGMENTS) return;
#if DISABLED(LASERBEAM)
// Bail if this is a zero-length block
if (block->step_event_count <= DROP_SEGMENTS) return;
#endif
block->fan_speed = fanSpeed;
......@@ -645,11 +638,6 @@ float junction_deviation = 0.1;
block->mix_event_count[i] = block->steps[E_AXIS] * mixing_factor[i];
#endif
// Add update block variables for LASER BEAM control
#if ENABLED(LASERBEAM)
block->laser_ttlmodulation = laser_ttl_modulation;
#endif
// Compute direction bits for this block
uint8_t dirb = 0;
#if MECH(COREXY) || MECH(COREYX)
......@@ -879,6 +867,51 @@ float junction_deviation = 0.1;
#endif
);
}
#if ENABLED(LASERBEAM)
block->laser_intensity = laser.intensity;
block->laser_duration = laser.duration;
block->laser_status = laser.status;
block->laser_mode = laser.mode;
// When operating in PULSED or RASTER modes, laser pulsing must operate in sync with movement.
// Calculate steps between laser firings (steps_l) and consider that when determining largest
// interval between steps for X, Y, Z, E, L to feed to the motion control code.
if (laser.mode == RASTER || laser.mode == PULSED) {
#if ENABLED(LASER_PULSE_METHOD)
// Optimizing. Move calculations here rather than in stepper isr
static const float Factor = F_CPU/(LASER_PWM*2*100.0*255.0);
block->laser_raster_intensity_factor = laser.intensity * Factor;
#endif
block->steps_l = (unsigned long)labs(block->millimeters*laser.ppm);
if (laser.mode == RASTER) {
for (int i = 0; i < LASER_MAX_RASTER_LINE; i++) {
#if (!ENABLED(LASER_PULSE_METHOD))
float OldRange, NewRange, NewValue;
OldRange = (255.0 - 0.0);
NewRange = (laser.rasterlaserpower - LASER_REMAP_INTENSITY);
NewValue = (float)(((((float)laser.raster_data[i] - 0) * NewRange) / OldRange) + LASER_REMAP_INTENSITY);
//If less than 7%, turn off the laser tube.
if(NewValue == LASER_REMAP_INTENSITY)
NewValue = 0;
block->laser_raster_data[i] = NewValue;
#else
block->laser_raster_data[i] = laser.raster_data[i];
#endif
}
}
}
else
block->steps_l = 0;
block->step_event_count = max(block->steps[X_AXIS], max(block->steps[Y_AXIS], max(block->steps[Z_AXIS], max(block->steps[E_AXIS], block->steps_l))));
if (laser.diagnostics && block->laser_status == LASER_ON)
ECHO_LM(INFO, "Laser firing enabled");
#endif // LASERBEAM
float inverse_millimeters = 1.0 / block->millimeters; // Inverse millimeters to remove multiple divides
// Calculate speed in mm/second for each axis. No divide by zero due to previous checks.
......
MK/module/motion/planner.h
View file @ 184769cb
......@@ -100,14 +100,25 @@ typedef struct {
#endif
#if ENABLED(LASERBEAM)
unsigned long laser_ttlmodulation;
#endif
uint8_t laser_mode; // CONTINUOUS, PULSED, RASTER
bool laser_status; // LASER_OFF, LASER_ON
float laser_ppm; // pulses per millimeter, for pulsed and raster firing modes
unsigned long laser_duration; // laser firing duration in microseconds, for pulsed and raster firing modes
unsigned long steps_l; // step count between firings of the laser, for pulsed firing mode
float laser_intensity; // Laser firing instensity in clock cycles for the PWM timer
#if ENABLED(LASER_RASTER)
unsigned char laser_raster_data[LASER_MAX_RASTER_LINE];
float laser_raster_intensity_factor;
#endif
#endif
volatile char busy;
} block_t;
#define BLOCK_MOD(n) ((n)&(BLOCK_BUFFER_SIZE-1))
#define MAX_EVENTS_COUNT 2147483648 // max for a signed 32 bit number
// Initialize the motion plan subsystem
void plan_init();
......
MK/module/motion/stepper.cpp
View file @ 184769cb
......@@ -68,6 +68,13 @@ block_t* current_block; // A pointer to the block currently being traced
static unsigned char last_direction_bits = 0; // The next stepping-bits to be output
static unsigned int cleaning_buffer_counter = 0;
#if ENABLED(LASERBEAM)
static long counter_L;
#if ENABLED(LASER_RASTER)
static int counter_raster;
#endif // LASER_RASTER
#endif // LASERBEAM
#if ENABLED(Z_DUAL_ENDSTOPS)
static bool performing_homing = false,
locked_z_motor = false,
......@@ -114,7 +121,7 @@ static unsigned short OCR1A_nominal;
static bool check_endstops = true;
volatile long count_position[NUM_AXIS] = { 0 }; // Positions of stepper motors, in step units
volatile signed char count_direction[NUM_AXIS] = { 1 };
volatile signed char count_direction[NUM_AXIS] = { 1, 1, 1, 1 };
//===========================================================================
......@@ -419,6 +426,15 @@ ISR(TIMER1_COMPA_vect) {
return;
}
#if ENABLED(LASERBEAM) && (!ENABLED(LASER_PULSE_METHOD))
if (laser.dur != 0 && (laser.last_firing + laser.dur < micros())) {
if (laser.diagnostics)
ECHO_LM(INFO, "Laser firing duration elapsed, in interrupt handler");
laser_extinguish();
}
#endif
// If there is no current block, attempt to pop one from the buffer
if (!current_block) {
// Anything in the buffer?
......@@ -430,6 +446,13 @@ ISR(TIMER1_COMPA_vect) {
// Initialize Bresenham counters to 1/2 the ceiling
counter_X = counter_Y = counter_Z = counter_E = -(current_block->step_event_count >> 1);
#if ENABLED(LASERBEAM)
counter_L = counter_X;
#if !ENABLED(LASER_PULSE_METHOD)
laser.dur = current_block->laser_duration;
#endif
#endif
#if ENABLED(COLOR_MIXING_EXTRUDER)
for (uint8_t i = 0; i < DRIVER_EXTRUDERS; i++)
counter_m[i] = -(current_block->step_event_count >> 1);
......@@ -445,6 +468,10 @@ ISR(TIMER1_COMPA_vect) {
}
#endif
#if ENABLED(LASERBEAM) && ENABLED(LASER_RASTER)
if (current_block->laser_mode == RASTER) counter_raster = 0;
#endif
// #if ENABLED(ADVANCE)
// e_steps[current_block->active_driver] = 0;
// #endif
......@@ -463,6 +490,19 @@ ISR(TIMER1_COMPA_vect) {
if (endstops.enabled) endstops.update();
#endif
// Continuous firing of the laser during a move happens here, PPM and raster happen further down
#if ENABLED(LASERBEAM)
if (current_block->laser_mode == CONTINUOUS && current_block->laser_status == LASER_ON)
laser_fire(current_block->laser_intensity);
#if !ENABLED(LASER_PULSE_METHOD)
if (current_block->laser_status == LASER_OFF) {
if (laser.diagnostics) ECHO_LM(INFO,"Laser status set to off, in interrupt handler");
laser_extinguish();
}
#endif
#endif
// Take multiple steps per interrupt (For high speed moves)
for (uint8_t i = 0; i < step_loops; i++) {
......@@ -557,6 +597,66 @@ ISR(TIMER1_COMPA_vect) {
#endif
#endif
#if ENABLED(LASERBEAM)
counter_L += current_block->steps_l;
if (counter_L > 0) {
if (current_block->laser_mode == PULSED && current_block->laser_status == LASER_ON) { // Pulsed Firing Mode
#if ENABLED(LASER_PULSE_METHOD)
uint32_t ulValue = current_block->laser_raster_intensity_factor * 255;
laser_pulse(ulValue, current_block->laser_duration);
laser.time += current_block->laser_duration / 1000;
#else
laser_fire(current_block->laser_intensity);
#endif
if (laser.diagnostics) {
ECHO_MV("X: ", counter_X);
ECHO_MV("Y: ", counter_Y);
ECHO_MV("L: ", counter_L);
}
}
#if ENABLED(LASER_RASTER)
if (current_block->laser_mode == RASTER && current_block->laser_status == LASER_ON) { // Raster Firing Mode
#if ENABLED(LASER_PULSE_METHOD)
uint32_t ulValue = current_block->laser_raster_intensity_factor *
current_block->laser_raster_data[counter_raster];
laser_pulse(ulValue, current_block->laser_duration);
counter_raster++;
laser.time += current_block->laser_duration/1000;
#else
// For some reason, when comparing raster power to ppm line burns the rasters were around 2% more powerful
// going from darkened paper to burning through paper.
laser_fire(current_block->laser_raster_data[counter_raster]);
#endif
if (laser.diagnostics) ECHO_EMV("Pixel: ", (float)current_block->laser_raster_data[counter_raster]);
counter_raster++;
}
#endif // LASER_RASTER
counter_L -= current_block->step_event_count;
}
#if !ENABLED(LASER_PULSE_METHOD)
if (current_block->laser_duration != 0 && (laser.last_firing + current_block->laser_duration < micros())) {
if (laser.diagnostics) {
ECHO_MV("X: ", counter_X);
ECHO_MV(", Y: ", counter_Y);
ECHO_MV(", L: ", counter_L);
ECHO_MV(", Z: ", counter_L);
ECHO_MV(", E: ", counter_E);
ECHO_MV(", steps done: ",step_events_completed);
ECHO_MV(", event count: ", current_block->step_event_count);
ECHO_EM(", <--------------------");
ECHO_LM(INFO, "Laser firing duration elapsed, in interrupt fast loop ");
}
laser_extinguish();
}
#endif
#endif // LASERBEAM
// safe check for erroneous calculated events count
if(current_block->step_event_count >= MAX_EVENTS_COUNT) {
kill_current_block();
break;
}
step_events_completed++;
if (step_events_completed >= current_block->step_event_count) break;
}
......@@ -664,6 +764,10 @@ ISR(TIMER1_COMPA_vect) {
if (step_events_completed >= current_block->step_event_count) {
current_block = NULL;
plan_discard_current_block();
#if ENABLED(LASERBEAM) && ENABLED(LASER_PULSE_METHOD)
if (current_block->laser_mode == CONTINUOUS && current_block->laser_status == LASER_ON)
laser_extinguish();
#endif
}
}
}
......
MK/module/nextion/NexHardware.cpp
View file @ 184769cb
......@@ -65,7 +65,7 @@ bool recvRetNumber(uint32_t *number, uint32_t timeout)
&& temp[7] == 0xFF
)
{
*number = (temp[4] << 24) | (temp[3] << 16) | (temp[2] << 8) | (temp[1]);
*number = ((uint32_t)temp[4] << 24) | ((uint32_t)temp[3] << 16) | ((uint32_t)temp[2] << 8) | ((uint32_t)temp[1]);
ret = true;
}
......
MK/module/pins.h
View file @ 184769cb
......@@ -344,6 +344,26 @@
#define _E5_PINS
#endif
#ifndef TEMP_COOLER_PIN
#define TEMP_COOLER_PIN -1
#endif
#ifndef COOLER_PIN
#define COOLER_PIN -1
#endif
#ifndef LASER_PWR_PIN
#define LASER_PWR_PIN -1
#endif
#ifndef LASER_TTL_PIN
#define LASER_TTL_PIN -1
#endif
#ifndef FLOWMETER_PIN
#define FLOWMETER_PIN -1
#endif
#define SENSITIVE_PINS { 0, 1, \
X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, \
Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, \
......@@ -351,7 +371,10 @@
PS_ON_PIN, HEATER_BED_PIN, FAN_PIN, \
_H0_PINS _H1_PINS _H2_PINS _H3_PINS \
_E0_PINS _E1_PINS _E2_PINS _E3_PINS _E4_PINS _E5_PINS \
analogInputToDigitalPin(TEMP_BED_PIN) \
analogInputToDigitalPin(TEMP_BED_PIN), \
analogInputToDigitalPin(TEMP_COOLER_PIN), \
COOLER_PIN, LASER_PWR_PIN, LASER_TTL_PIN, \
FLOWMETER_PIN \
}
#endif //__PINS_H
MK/module/sanitycheck.h
View file @ 184769cb
......@@ -82,12 +82,18 @@
#if DISABLED(TEMP_SENSOR_BED)
#error DEPENDENCY ERROR: Missing setting TEMP_SENSOR_BED
#endif
#if (THERMISTORHEATER_0 == 998) || (THERMISTORHEATER_1 == 998) || (THERMISTORHEATER_2 == 998) || (THERMISTORHEATER_3 == 998) || (THERMISTORBED == 998) //User EXIST table
#if DISABLED(TEMP_SENSOR_CHAMBER)
#error DEPENDENCY_ERROR: Missing setting TEMP_SENSOR_CHAMBER
#endif
#if DISABLED(TEMP_SENSOR_COOLER)
#error DEPENDENCY_ERROR: Missing setting TEMP_SENSOR_COOLER
#endif
#if (THERMISTORHEATER_0 == 998) || (THERMISTORHEATER_1 == 998) || (THERMISTORHEATER_2 == 998) || (THERMISTORHEATER_3 == 998) || (THERMISTORBED == 998) || (THERMISTORCHAMBER == 998) || (THERMISTORCOOLER == 998) // User EXIST table
#if DISABLED(DUMMY_THERMISTOR_998_VALUE)
#define DUMMY_THERMISTOR_998_VALUE 25
#endif
#endif
#if (THERMISTORHEATER_0 == 999) || (THERMISTORHEATER_1 == 999) || (THERMISTORHEATER_2 == 999) || (THERMISTORHEATER_3 == 999) || (THERMISTORBED == 999) //User EXIST table
#if (THERMISTORHEATER_0 == 999) || (THERMISTORHEATER_1 == 999) || (THERMISTORHEATER_2 == 999) || (THERMISTORHEATER_3 == 999) || (THERMISTORBED == 999) || (THERMISTORCHAMBER == 999) || (THERMISTORCOOLER == 999)// User EXIST table
#if DISABLED(DUMMY_THERMISTOR_999_VALUE)
#define DUMMY_THERMISTOR_999_VALUE 25
#endif
......@@ -145,6 +151,28 @@
#error DEPENDENCY ERROR: Missing setting BED_MINTEMP
#endif
#endif
#if TEMP_SENSOR_CHAMBER != 0
#if DISABLED(CHAMBER_MAXTEMP)
#error DEPENDENCY ERROR: Missing setting CHAMBER_MAXTEMP
#endif
#if DISABLED(CHAMBER_MINTEMP)
#error DEPENDENCY ERROR: Missing setting CHAMBER_MINTEMP
#endif
#if HASNT(HEATER_CHAMBER)
#error DEPENDENCY ERROR: Cannot enable TEMP_SENSOR_CHAMBER and not HEATER_CHAMBER_PIN
#endif
#endif
#if TEMP_SENSOR_COOLER != 0
#if DISABLED(COOLER_MAXTEMP)
#error DEPENDENCY ERROR: Missing setting COOLER_MAXTEMP
#endif
#if DISABLED(COOLER_MINTEMP)
#error DEPENDENCY ERROR: Missing setting COOLER_MINTEMP
#endif
#if HASNT(COOLER)
#error DEPENDENCY ERROR: Cannot enable TEMP_SENSOR_COOLER and not COOLER_PIN
#endif
#endif
#if DISABLED(PLA_PREHEAT_HOTEND_TEMP)
#error DEPENDENCY ERROR: Missing setting PLA_PREHEAT_HOTEND_TEMP
#endif
......@@ -187,7 +215,13 @@
#if DISABLED(MAX_BED_POWER)
#error DEPENDENCY ERROR: Missing setting MAX_BED_POWER
#endif
#if ENABLED(PIDTEMP) || ENABLED(PIDTEMPBED)
#if DISABLED(MAX_CHAMBER_POWER)
#error DEPENDENCY ERROR: Missing setting MAX_CHAMBER_POWER
#endif
#if DISABLED(MAX_COOLER_POWER)
#error DEPENDENCY ERROR: Missing setting MAX_COOLER_POWER
#endif
#if ENABLED(PIDTEMP) || ENABLED(PIDTEMPBED) || ENABLED(PIDTEMPCHAMBER) || ENABLED(PIDTEMPCOOLER)
#if DISABLED(MAX_OVERSHOOT_PID_AUTOTUNE)
#error DEPENDENCY ERROR: Missing setting MAX_OVERSHOOT_PID_AUTOTUNE
#endif
......@@ -223,6 +257,35 @@
#error DEPENDENCY ERROR: Missing setting DEFAULT_bedKd
#endif
#endif
#if ENABLED(PIDTEMPCHAMBER)
#if DISABLED(PID_CHAMBER_INTEGRAL_DRIVE_MAX)
#error DEPENDENCY ERROR: Missing setting PID_CHAMBER_INTEGRAL_DRIVE_MAX
#endif
#if DISABLED(DEFAULT_chamberKp)
#error DEPENDENCY ERROR: Missing setting DEFAULT_chamberKp
#endif
#if DISABLED(DEFAULT_chamberKi)
#error DEPENDENCY ERROR: Missing setting DEFAULT_chamberKi
#endif
#if DISABLED(DEFAULT_chamberKd)
#error DEPENDENCY ERROR: Missing setting DEFAULT_chamberKd
#endif
#endif
#if ENABLED(PIDTEMPCOOLER)
#if DISABLED(PID_COOLER_INTEGRAL_DRIVE_MAX)
#error DEPENDENCY ERROR: Missing setting PID_COOLER_INTEGRAL_DRIVE_MAX
#endif
#if DISABLED(DEFAULT_coolerKp)
#error DEPENDENCY ERROR: Missing setting DEFAULT_coolerKp
#endif
#if DISABLED(DEFAULT_coolerKi)
#error DEPENDENCY ERROR: Missing setting DEFAULT_coolerKi
#endif
#if DISABLED(DEFAULT_coolerKd)
#error DEPENDENCY ERROR: Missing setting DEFAULT_coolerKd
#endif
#endif
#if ENABLED(BED_LIMIT_SWITCHING)
#if DISABLED(BED_HYSTERESIS)
#error DEPENDENCY ERROR: Missing setting BED_HYSTERESIS
......@@ -231,6 +294,22 @@
#error DEPENDENCY ERROR: Missing setting BED_CHECK_INTERVAL
#endif
#endif
#if ENABLED(CHAMBER_LIMIT_SWITCHING)
#if DISABLED(CHAMBER_HYSTERESIS)
#error DEPENDENCY ERROR: Missing setting CHAMBER_HYSTERESIS
#endif
#if DISABLED(CHAMBER_CHECK_INTERVAL)
#error DEPENDENCY ERROR: Missing setting CHAMBER_CHECK_INTERVAL
#endif
#endif
#if ENABLED(COOLER_LIMIT_SWITCHING)
#if DISABLED(COOLER_HYSTERESIS)
#error DEPENDENCY ERROR: Missing setting COOLER_HYSTERESIS
#endif
#if DISABLED(COOLER_CHECK_INTERVAL)
#error DEPENDENCY ERROR: Missing setting COOLER_CHECK_INTERVAL
#endif
#endif
#if ENABLED(THERMAL_PROTECTION_HOTENDS)
#if DISABLED(THERMAL_PROTECTION_PERIOD)
#error DEPENDENCY ERROR: Missing setting THERMAL_PROTECTION_PERIOD
......@@ -253,6 +332,23 @@
#error DEPENDENCY ERROR: Missing setting THERMAL_PROTECTION_BED_HYSTERESIS
#endif
#endif
#if ENABLED(THERMAL_PROTECTION_COOLER)
#if DISANLED(THERMAL_PROTECTION_COOLER_PERIOD)
#error DEPENDENCY ERROR: Missing setting THERMAL_PROTECTION_COOLER_PERIOD
#endif
#if DISABLED(THERMAL_PROTECTION_COOLER_HYSTERESIS)
#error DEPENDENCY ERROR: Missing setting THERMAL_PROTECTION_COOLER_HYSTERESIS
#endif
#if ENABLED(THERMAL_PROTECTION_COOLER_WATCHDOG)
#if DISABLED(WATCH_TEMP_COOLER_PERIOD)
#error DEPENDENCY ERROR: Missing setting WATCH_TEMP_COOLER_PERIOD
#endif
#if DISABLED(WATCH_TEMP_COOLER_DECREASE)
#error DEPENDENCY ERROR: Missing setting WATCH_TEMP_COOLER_DECREASE
#endif
#endif
#endif
// Fan
#if DISABLED(SOFT_PWM_SCALE)
......@@ -1762,8 +1858,26 @@
#error DEPENDENCY ERROR: You must set EXTRUDERS = 2 for DONDOLO
#endif
#if ENABLED(LASERBEAM) && (!PIN_EXISTS(LASER_PWR) || !PIN_EXISTS(LASER_TTL))
#error DEPENDENCY ERROR: You have to set LASER_PWR_PIN and LASER_TTL_PIN to a valid pin if you enable LASERBEAM
#if ENABLED(LASERBEAM)
#if (!ENABLED(LASER_REMAP_INTENSITY) && ENABLED(LASER_RASTER))
#error DEPENDENCY ERROR: You have to set LASER_REMAP_INTENSITY with LASER_RASTER enabled
#endif
#if (!ENABLED(LASER_CONTROL) || ((LASER_CONTROL != 1) && (LASER_CONTROL != 2)))
#error DEPENDENCY ERROR: You have to set LASER_CONTROL to 1 or 2
#else
#if(LASER_CONTROL == 1)
#if( !PIN_EXISTS(LASER_PWR))
#error DEPENDENCY ERROR: You have to set LASER_PWR_PIN
#endif
#else
#if( !PIN_EXISTS(LASER_PWR) || !PIN_EXISTS(LASER_TTL))
#error DEPENDENCY ERROR: You have to set LASER_PWR_PIN and LASER_TTL_PIN to a valid pin if you enable LASER
#endif
#endif
#endif
#if DISABLED(LASER_HAS_FOCUS)
#error DEPENDENCY ERROR: Missing LASER_HAS_FOCUS setting
#endif
#endif
#if ENABLED(FILAMENT_RUNOUT_SENSOR) && !PIN_EXISTS(FILRUNOUT)
......@@ -1774,6 +1888,10 @@
#error DEPENDENCY ERROR: You have to set FILWIDTH_PIN to a valid pin if you enable FILAMENT_SENSOR
#endif
#if ENABLED(FILAMENT_SENSOR) && !PIN_EXISTS(FLOWMETER)
#error DEPENDENCY ERROR: You have to set FLOWMETER_PIN to a valid pin if you enable FLOWMETER_SENSOR
#endif
#if ENABLED(POWER_CONSUMPTION) && !PIN_EXISTS(POWER_CONSUMPTION)
#error DEPENDENCY ERROR: You have to set POWER_CONSUMPTION_PIN to a valid pin if you enable POWER_CONSUMPTION
#endif
......
MK/module/sensor/flowmeter.cpp 0 → 100644
View file @ 184769cb
/**
* MK & MK4due 3D Printer Firmware
*
* Based on Marlin, Sprinter and grbl
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (C) 2013 - 2016 Alberto Cotronei @MagoKimbra
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* flowmeter.h - Flowmeter control library for Arduino - Version 1
* Copyright (c) 2016 Franco (nextime) Lanza. All right reserved.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 3 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "../../base.h"
#include <Arduino.h>
#if ENABLED(FLOWMETER_SENSOR)
volatile int flowrate_pulsecount;
float flowrate;
static millis_t flowmeter_timer = 0;
static millis_t lastflow = 0;
void flowrate_pulsecounter();
void flow_init() {
flowrate = 0;
flowrate_pulsecount = 0;
pinMode(FLOWMETER_PIN, INPUT);
attachInterrupt(digitalPinToInterrupt(FLOWMETER_PIN), flowrate_pulsecounter, FALLING);
}
void flowrate_manage() {
millis_t now;
now = millis();
if(ELAPSED(now, flowmeter_timer)) {
detachInterrupt(digitalPinToInterrupt(FLOWMETER_PIN));
flowrate = (float)(((1000.0 / (float)((float)now - (float)lastflow)) * (float)flowrate_pulsecount) / (float)FLOWMETER_CALIBRATION);
#if ENABLED(FLOWMETER_DEBUG)
ECHO_M(" FLOWMETER DEBUG ");
ECHO_MV(" flowrate:", flowrate);
ECHO_MV(" flowrate_pulsecount:", flowrate_pulsecount);
ECHO_EMV(" CALIBRATION:", FLOWMETER_CALIBRATION);
#endif
flowmeter_timer = now + 1000UL;
lastflow = now;
flowrate_pulsecount = 0;
attachInterrupt(digitalPinToInterrupt(FLOWMETER_PIN), flowrate_pulsecounter, FALLING);
}
}
float get_flowrate() {
return flowrate;
}
void flowrate_pulsecounter() {
// Increment the pulse counter
flowrate_pulsecount++;
}
#endif // FLOWMETER_SENSOR
MK/module/sensor/flowmeter.h 0 → 100644
View file @ 184769cb
/**
* MK & MK4due 3D Printer Firmware
*
* Based on Marlin, Sprinter and grbl
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (C) 2013 - 2016 Alberto Cotronei @MagoKimbra
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* flowmeter.h - Flowmeter control library for Arduino - Version 1
* Copyright (c) 2016 Franco (nextime) Lanza. All right reserved.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 3 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef FLOWMETER_H
#define FLOWMETER_H
#define FLOWMETER_CALIBRATION (FLOWMETER_MAXFREQ / FLOWMETER_MAXFLOW)
#if ENABLED(FLOWMETER_SENSOR)
void flowrate_manage();
void flow_init();
float get_flowrate();
#endif
#endif // FLOWMETER_H
MK/module/temperature/temperature.cpp
View file @ 184769cb
This diff is collapsed.
MK/module/temperature/temperature.h
View file @ 184769cb
......@@ -45,7 +45,7 @@
// public functions
void tp_init(); //initialize the heating
void manage_heater(); //it is critical that this is called periodically.
void manage_temp_controller(); //it is critical that this is called periodically.
#if ENABLED(FILAMENT_SENSOR)
// For converting raw Filament Width to milimeters
......@@ -69,12 +69,20 @@ void manage_heater(); //it is critical that this is called periodically.
// do not use these routines and variables outside of temperature.cpp
extern int target_temperature[4];
extern float current_temperature[4];
extern int target_temperature_bed;
extern float current_temperature_bed;
extern int target_temperature_chamber;
extern float current_temperature_chamber;
extern int target_temperature_cooler;
extern float current_temperature_cooler;
#if ENABLED(SHOW_TEMP_ADC_VALUES)
extern int current_temperature_raw[4];
extern int current_temperature_bed_raw;
extern int current_temperature_chamber_raw;
extern int current_temperature_cooler_raw;
#endif
extern int target_temperature_bed;
extern float current_temperature_bed;
#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
extern float redundant_temperature;
#endif
......@@ -92,7 +100,15 @@ extern float current_temperature_bed;
extern float bedKp, bedKi, bedKd;
#endif
#if ENABLED(PIDTEMP) || ENABLED(PIDTEMPBED)
#if ENABLED(PIDTEMPCHAMBER)
extern float chamberKp, chamberKi, chamberKd;
#endif
#if ENABLED(PIDTEMPCOOLER)
extern float coolerKp, coolerKi, coolerKd;
#endif
#if ENABLED(PIDTEMP) || ENABLED(PIDTEMPBED) || ENABLED(PIDTEMPCHAMBER) || ENABLED(PIDTEMPCOOLER)
float scalePID_i(float i);
float scalePID_d(float d);
float unscalePID_i(float i);
......@@ -114,14 +130,20 @@ extern float current_temperature_bed;
FORCE_INLINE float degHotend(uint8_t hotend) { return current_temperature[HOTEND_ARG]; }
FORCE_INLINE float degBed() { return current_temperature_bed; }
FORCE_INLINE float degChamber() { return current_temperature_chamber; }
FORCE_INLINE float degCooler() { return current_temperature_cooler; }
#if ENABLED(SHOW_TEMP_ADC_VALUES)
FORCE_INLINE float rawHotendTemp(uint8_t hotend) { return current_temperature_raw[HOTEND_ARG]; }
FORCE_INLINE float rawBedTemp() { return current_temperature_bed_raw; }
FORCE_INLINE float rawChamberTemp() { return current_temperature_chamber_raw; }
FORCE_INLINE float rawCoolerTemp() { return current_temperature_cooler_raw; }
#endif
FORCE_INLINE float degTargetHotend(uint8_t hotend) { return target_temperature[HOTEND_ARG]; }
FORCE_INLINE float degTargetBed() { return target_temperature_bed; }
FORCE_INLINE float degTargetChamber() { return target_temperature_chamber; }
FORCE_INLINE float degTargetCooler() { return target_temperature_cooler; }
#if ENABLED(THERMAL_PROTECTION_HOTENDS)
void start_watching_heater(int h = 0);
......@@ -131,6 +153,14 @@ FORCE_INLINE float degTargetBed() { return target_temperature_bed; }
void start_watching_bed();
#endif
#if ENABLED(THERMAL_PROTECTION_CHAMBER)
void start_watching_chamber();
#endif
#if ENABLED(THERMAL_PROTECTION_COOLER)
void start_watching_cooler();
#endif
FORCE_INLINE void setTargetHotend(const float& celsius, uint8_t hotend) {
target_temperature[HOTEND_ARG] = celsius;
#if ENABLED(THERMAL_PROTECTION_HOTENDS)
......@@ -145,11 +175,29 @@ FORCE_INLINE void setTargetBed(const float& celsius) {
#endif
}
FORCE_INLINE void setTargetChamber(const float& celsius) {
target_temperature_chamber = celsius;
#if ENABLED(THERMAL_PROTECTION_CHAMBER)
start_watching_chamber();
#endif
}
FORCE_INLINE void setTargetCooler(const float& celsius) {
target_temperature_cooler = celsius;
#if ENABLED(THERMAL_PROTECTION_COOLER)
start_watching_cooler();
#endif
}
FORCE_INLINE bool isHeatingHotend(uint8_t hotend) { return target_temperature[HOTEND_ARG] > current_temperature[HOTEND_ARG]; }
FORCE_INLINE bool isHeatingBed() { return target_temperature_bed > current_temperature_bed; }
FORCE_INLINE bool isHeatingChamber() { return target_temperature_chamber > current_temperature_chamber; }
FORCE_INLINE bool isHeatingCooler() { return target_temperature_cooler > current_temperature_cooler; }
FORCE_INLINE bool isCoolingHotend(uint8_t hotend) { return target_temperature[HOTEND_ARG] < current_temperature[HOTEND_ARG]; }
FORCE_INLINE bool isCoolingBed() { return target_temperature_bed < current_temperature_bed; }
FORCE_INLINE bool isCoolingChamber() { return target_temperature_chamber < current_temperature_chamber; }
FORCE_INLINE bool isCoolingCooler() { return target_temperature_cooler < current_temperature_cooler; }
#define HOTEND_ROUTINES(NR) \
FORCE_INLINE float degHotend##NR() { return degHotend(NR); } \
......@@ -175,11 +223,17 @@ HOTEND_ROUTINES(0);
#endif
int getHeaterPower(int heater);
int getBedPower();
int getChamberPower();
int getCoolerPower();
unsigned char getPwmCooler(bool soft);
void disable_all_heaters();
void disable_all_coolers();
void updatePID();
#if HAS(PID_HEATING)
void PID_autotune(float temp, int hotend, int ncycles, bool set_result = false);
#if HAS(PID_HEATING) || HAS(PID_COOLING)
void PID_autotune(float temp, int temp_controller, int ncycles, bool set_result = false);
#endif
void setExtruderAutoFanState(int pin, bool state);
......
MK/module/temperature/thermistortables.h
View file @ 184769cb
This diff is collapsed.
README.md
View file @ 184769cb
......@@ -46,6 +46,8 @@ Added total filament printed writed in SD CARD.
Added anti extruder idle oozing system.
Added Hysteresis and Z-Wobble correction (only cartesian printers).
Added support reader TAG width MFRC522
Added Cooler and Hot Chamber
Added Laser beam, raset
## Credits
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment