Update 4.2.5

MarlinKimbra/Configuration_Basic.h → MK/Configuration_Basic.h

@@ -30,7 +30,7 @@
 
 // Enable the Bluetooth serial interface
 //#define BLUETOOTH
-#define BLUETOOTH_SERIAL 1
+#define BLUETOOTH_PORT 1
 #define BLUETOOTH_BAUD 115200
 
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during

MarlinKimbra/Configuration_Feature.h → MK/Configuration_Feature.h

@@ -49,6 +49,7 @@
  * - Filament diameter sensor
  * - Filament Runout sensor
  * - Power consumption sensor
+ * - RFID card sensor
  * ADDON FEATURES:
  * - EEPROM
  * - SDCARD
@@ -322,7 +323,7 @@
 
 // Extruder cooling fans
 // Configure fan pin outputs to automatically turn on/off when the associated
-// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
+// extruder temperature is above/below EXTRUDER AUTO FAN TEMPERATURE.
 // Multiple extruders can be assigned to the same pin in which case
 // the fan will turn on when any selected extruder is above the threshold.
 // You need to set _AUTO_FAN_PIN in Configuration_pins.h
@@ -1150,9 +1151,9 @@
 // http://reprap.org/wiki/Mini_panel
 //#define MINIPANEL
 
-// Nextion HMI panel
-// REMEMBER TO INSTALL Nextion library in your ARDUINO library folder. You can find it in Arduino/libraries/
+// Nextion HMI panel Serial
 //#define NEXTION
+#define NEXTION_PORT 1
 // For GFX Visualization enable Nextion GFX
 //#define NEXTION_GFX
 

MarlinKimbra/Configuration_Overall.h → MK/Configuration_Overall.h

 /**
  * Configuration_Overall.h
  * Here you can define all your custom settings and they will overwrite configurations in the main configuration files.
- * Decomment or comment CONFIGURATION OVERALL ON for active or deactive this file.
  */
 
-//#define CONFIGURATION_OVERALL_ON

MarlinKimbra/Configuration_Pins.h → MK/Configuration_Pins.h

@@ -133,7 +133,7 @@
 #endif
 
 #if ENABLED(Z_PROBE_ENDSTOP)
-  #define Z_PROBE_PIN -1
+  #define Z_PROBE_PIN ORIG_Z_MIN_PIN
 #endif
 
 //============================================================================

MarlinKimbra/Configuration_Store.cpp → MK/Configuration_Store.cpp

@@ -410,7 +410,7 @@ void Config_RetrieveSettings() {
     updatePID();
 
     // Report settings retrieved and length
-    ECHO_ST(DB, ver);
+    ECHO_SV(DB, ver);
     ECHO_MV(" stored settings retrieved (", (unsigned long)i);
     ECHO_EM(" bytes)");
   }

MarlinKimbra/Configuration_Store.h → MK/Configuration_Store.h

@@ -22,7 +22,9 @@ FORCE_INLINE void Config_RetrieveSettings() { Config_ResetDefault(); Config_Prin
 
 #if ENABLED(SDSUPPORT) && ENABLED(SD_SETTINGS)
 #define CFG_SD_MAX_KEY_LEN    3+1         // icrease this if you add key name longer than the actual value.
-#define CFG_SD_MAX_VALUE_LEN  30+1        // this should be enought for int, long and float if you need to retrive strings increase this carefully
+#define CFG_SD_MAX_VALUE_LEN  10+1        // this should be enought for int, long and float if you need to retrive strings increase this carefully
+//(11 = strlen("4294967295")+1) (4294967295 = (2^32)-1) (32 = the num of bits of the bigger basic data scructor used)
+//If yuou need to save string increase this to strlen("YOUR LONGER STRING")+1
 void ConfigSD_StoreSettings();
 void ConfigSD_RetrieveSettings(bool addValue = false);
 int ConfigSD_KeyIndex(char *key);

MarlinKimbra/MarlinKimbra.ino → MK/MK.ino

@@ -2,7 +2,7 @@
  * MK Firmware
  *
  * Based on Marlin, Sprinter and grbl
- * Copyright (C) 2013 MK
+ * Copyright (C) 2013 MagoKimbra
  * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify

MarlinKimbra/base.h → MK/base.h

@@ -11,13 +11,16 @@
 #include <avr/pgmspace.h>
 #include <avr/interrupt.h>
 
+#define ENABLED defined
+#define DISABLED !defined
+
 #include "Boards.h"
 #include "module/mechanics.h"
 
 #include "Configuration_Version.h"
 #include "Configuration_Overall.h"
 
-#ifndef CONFIGURATION_OVERALL_ON
+#if DISABLED(CONFIGURATION_OVERALL_ON)
   #include "Configuration_Basic.h"
 
   #if MECH(CARTESIAN)

MarlinKimbra/module/HAL/HAL.h → MK/module/HAL/HAL.h

@@ -54,8 +54,6 @@
   #define COS_60 0.5
 
   // Macros to support option testing
-  #define ENABLED defined
-  #define DISABLED !defined
   #define PIN_EXISTS(PN) (defined(PN##_PIN) && PN##_PIN >= 0)
   #define HAS(FE) (HAS_##FE)
   #define HASNT(FE) (!(HAS_##FE))

MarlinKimbra/module/HAL/HardwareSerial.h → MK/module/HAL/HardwareSerial.h

@@ -23,7 +23,7 @@
   #define HardwareSerial_H
 
   #define clear_bit(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
-  #define set_bit(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
+  #define set_bit(sfr, bit)   (_SFR_BYTE(sfr) |= _BV(bit))
 
   // The presence of the UBRRH register is used to detect a UART.
   #define UART_PRESENT(port) ((port == 0 && (defined(UBRRH) || defined(UBRR0H))) || \

MarlinKimbra/module/MK_Main.cpp → MK/module/MK_Main.cpp

@@ -2805,7 +2805,7 @@ void gcode_get_destination() {
 }
 
 void unknown_command_error() {
-  ECHO_LMT(ER, SERIAL_UNKNOWN_COMMAND, current_command);
+  ECHO_LMV(ER, SERIAL_UNKNOWN_COMMAND, current_command);
 }
 
 /**
@@ -5388,6 +5388,7 @@ inline void gcode_M140() {
  *
  *    T<extruder> - Optional extruder number. Current extruder if omitted.
  *    D<mm> - Diameter of the filament. Use "D0" to set units back to millimetres.
+ *    S<0/1> - Deactivate o Activate volumetric
  */
 inline void gcode_M200() {
 
@@ -5399,17 +5400,25 @@ inline void gcode_M200() {
     // slicers either generate in extruder values as cubic mm or as as filament feeds
     // for all extruders
     volumetric_enabled = (diameter != 0.0);
-    if (volumetric_enabled) {
-      filament_size[target_extruder] = diameter;
-      // make sure all extruders have some sane value for the filament size
-      for (int i = 0; i < EXTRUDERS; i++)
-        if (!filament_size[i]) filament_size[i] = DEFAULT_NOMINAL_FILAMENT_DIA;
-    }
+    filament_size[target_extruder] = diameter;
   }
-  else {
-    //reserved for setting filament diameter via UFID or filament measuring device
-    return;
+
+  if (code_seen('S')) {
+    if (code_value())
+      volumetric_enabled = true;
+    else
+      volumetric_enabled = false;
+  }
+
+  if (volumetric_enabled) {
+    ECHO_LM(INFO, "Volumetric Enabled");
+    // make sure all extruders have some sane value for the filament size
+    for (int i = 0; i < EXTRUDERS; i++)
+      if (!filament_size[i]) filament_size[i] = DEFAULT_NOMINAL_FILAMENT_DIA;
   }
+  else
+    ECHO_LM(INFO, "Volumetric Disabled");
+
   calculate_volumetric_multipliers();
 }
 
@@ -8231,7 +8240,7 @@ bool setTargetedExtruder(int code) {
 float calculate_volumetric_multiplier(float diameter) {
   if (!volumetric_enabled || diameter == 0) return 1.0;
   float d2 = diameter * 0.5;
-  return 100.0 / (M_PI * d2 * d2);
+  return 1.0 / (M_PI * d2 * d2);
 }
 
 void calculate_volumetric_multipliers() {

MarlinKimbra/module/fwtest/firmware_test.cpp → MK/module/fwtest/firmware_test.cpp

@@ -13,7 +13,7 @@ static char serial_answer;
 
 void FirmwareTest() {
   ECHO_EM("---------- FIRMWARE TEST --------------");
-  ECHO_EM("--------- by MarlinKimbra -------------");
+  ECHO_EM("--------------- MK --------------------");
   ECHO_EV(MSG_FWTEST_01);
   ECHO_EV(MSG_FWTEST_02);
   ECHO_EV(MSG_FWTEST_YES_NO);

MarlinKimbra/module/language/language_an.h → MK/module/language/language_an.h

@@ -33,6 +33,7 @@
 #define MSG_SET_ORIGIN                      "Establir zero"
 #define MSG_ONFOR                           "On x:"
 #define MSG_PWRCONSUMED                     "P.er:"
+#define MSG_FILCONSUMED                     "F:"
 #define MSG_PREHEAT                         "Prec."
 #define MSG_CONGIG                          "conf."
 #define MSG_PREHEAT_PLA                     MSG_PREHEAT " PLA"

MarlinKimbra/module/language/language_bg.h → MK/module/language/language_bg.h

@@ -33,6 +33,7 @@
 #define MSG_SET_ORIGIN                      "Изходна точка"
 #define MSG_ONFOR                           "On x:"
 #define MSG_PWRCONSUMED                     "P.er:"
+#define MSG_FILCONSUMED                     "F:"
 #define MSG_PREHEAT                         "Подгр."
 #define MSG_CONGIG                          "Настр."
 #define MSG_PREHEAT_PLA                     MSG_PREHEAT " PLA"

MarlinKimbra/module/language/language_ca.h → MK/module/language/language_ca.h

@@ -33,6 +33,7 @@
 #define MSG_SET_ORIGIN                      "Establir origen"
 #define MSG_ONFOR                           "On x:"
 #define MSG_PWRCONSUMED                     "P.er:"
+#define MSG_FILCONSUMED                     "F:"
 #define MSG_PREHEAT                         "Preesc."
 #define MSG_PREHEAT_PLA                     MSG_PREHEAT " PLA"
 #define MSG_PREHEAT_PLA_ALL                 MSG_PREHEAT_PLA " All"

MarlinKimbra/module/language/language_cn.h → MK/module/language/language_cn.h

@@ -33,6 +33,7 @@
 #define MSG_SET_ORIGIN                      "\xbe\xbf\xbc\xbd"
 #define MSG_ONFOR                           "On x:"
 #define MSG_PWRCONSUMED                     "P.er:"
+#define MSG_FILCONSUMED                     "F:"
 #define MSG_PREHEAT                         "\xc3\xc4"
 #define MSG_PREHEAT_PLA                     MSG_PREHEAT " PLA"
 #define MSG_PREHEAT_PLA_ALL                 MSG_PREHEAT_PLA " \xc5\xc6"

MarlinKimbra/module/language/language_da.h → MK/module/language/language_da.h

@@ -33,6 +33,7 @@
 #define MSG_SET_ORIGIN                      "Set origin"
 #define MSG_ONFOR                           "On x:"
 #define MSG_PWRCONSUMED                     "P.er:"
+#define MSG_FILCONSUMED                     "F:"
 #define MSG_PREHEAT                         "Forvarm"
 #define MSG_PREHEAT_PLA                     MSG_PREHEAT " PLA"
 #define MSG_PREHEAT_PLA_ALL                 MSG_PREHEAT_PLA " Alle"

MarlinKimbra/module/language/language_de.h → MK/module/language/language_de.h

@@ -33,6 +33,7 @@
 #define MSG_SET_ORIGIN                      "Setze Null hier"
 #define MSG_ONFOR                           "On x:"
 #define MSG_PWRCONSUMED                     "P.er:"
+#define MSG_FILCONSUMED                     "F:"
 #define MSG_PREHEAT                         "Vorwärmen"
 #define MSG_PREHEAT_PLA                     MSG_PREHEAT " PLA"
 #define MSG_PREHEAT_PLA_ALL                 MSG_PREHEAT_PLA " All"

MarlinKimbra/module/language/language_en.h → MK/module/language/language_en.h

@@ -33,6 +33,7 @@
 #define MSG_SET_ORIGIN                      "Set origin"
 #define MSG_ONFOR                           "On x:"
 #define MSG_PWRCONSUMED                     "P.er:"
+#define MSG_FILCONSUMED                     "F:"
 #define MSG_PREHEAT                         "Preheat"
 #define MSG_PREHEAT_PLA                     MSG_PREHEAT " PLA"
 #define MSG_PREHEAT_PLA_ALL                 MSG_PREHEAT_PLA " All"

MarlinKimbra/module/language/language_es.h → MK/module/language/language_es.h

@@ -33,6 +33,7 @@
 #define MSG_SET_ORIGIN                      "Establecer cero"
 #define MSG_ONFOR                           "On x:"
 #define MSG_PWRCONSUMED                     "P.er:"
+#define MSG_FILCONSUMED                     "F:"
 #define MSG_PREHEAT                         "Precalentar"
 #define MSG_PREHEAT_PLA                     MSG_PREHEAT " PLA"
 #define MSG_PREHEAT_PLA_ALL                 MSG_PREHEAT_PLA " All"

MarlinKimbra/module/language/language_eu.h → MK/module/language/language_eu.h

@@ -33,6 +33,7 @@
 #define MSG_SET_ORIGIN                      "Hasiera ipini"
 #define MSG_ONFOR                           "On x:"
 #define MSG_PWRCONSUMED                     "P.er:"
+#define MSG_FILCONSUMED                     "F:"
 #define MSG_PREHEAT                         "Berotu"
 #define MSG_PREHEAT_PLA                     MSG_PREHEAT " PLA"
 #define MSG_PREHEAT_PLA_ALL                 MSG_PREHEAT_PLA " Guztia"

MarlinKimbra/module/language/language_fi.h → MK/module/language/language_fi.h

@@ -33,6 +33,7 @@
 #define MSG_SET_ORIGIN                      "Aseta origo"
 #define MSG_ONFOR                           "On x:"
 #define MSG_PWRCONSUMED                     "P.er:"
+#define MSG_FILCONSUMED                     "F:"
 #define MSG_PREHEAT                         "Preheat"
 #define MSG_PREHEAT_PLA                     MSG_PREHEAT " PLA"
 #define MSG_PREHEAT_PLA_ALL                 MSG_PREHEAT_PLA " All"

MarlinKimbra/module/language/language_fr.h → MK/module/language/language_fr.h

@@ -33,6 +33,7 @@
 #define MSG_SET_ORIGIN                      "Regler origine"
 #define MSG_ONFOR                           "On x:"
 #define MSG_PWRCONSUMED                     "P.er:"
+#define MSG_FILCONSUMED                     "F:"
 #define MSG_PREHEAT                         "Prech."
 #define MSG_PREHEAT_PLA                     MSG_PREHEAT " PLA"
 #define MSG_PREHEAT_PLA_ALL                 MSG_PREHEAT_PLA " Tout"

MarlinKimbra/module/language/language_it.h → MK/module/language/language_it.h

@@ -33,6 +33,7 @@
 #define MSG_SET_ORIGIN                      "Imposta Origine"
 #define MSG_ONFOR                           "On x:"
 #define MSG_PWRCONSUMED                     "P.za:"
+#define MSG_FILCONSUMED                     "F:"
 #define MSG_PREHEAT                         "Preriscalda"
 #define MSG_PREHEAT_PLA                     "Preriscalda PLA"
 #define MSG_PREHEAT_PLA_ALL                 "Prer. PLA Tutto"

MarlinKimbra/module/language/language_kana.h → MK/module/language/language_kana.h

@@ -35,6 +35,7 @@
 #define MSG_SET_ORIGIN                      "\xb7\xbc\xde\xad\xdd\xbe\xaf\xc4"                             // "Set origin"
 #define MSG_ONFOR                           "On x:"
 #define MSG_PWRCONSUMED                     "P.er:"
+#define MSG_FILCONSUMED                     "F:"
 #define MSG_PREHEAT                         "Preheat"
 #define MSG_PREHEAT_PLA                     "PLA \xd6\xc8\xc2"
 #define MSG_PREHEAT_PLA_ALL                 MSG_PREHEAT_PLA " \xbd\xcd\xde\xc3"                            // " All"

MarlinKimbra/module/language/language_kana_utf8.h → MK/module/language/language_kana_utf8.h

@@ -38,6 +38,7 @@
 #define MSG_SET_ORIGIN                      "キヅユンセツト"                 // "Set origin"
 #define MSG_ONFOR                           "On x:"
 #define MSG_PWRCONSUMED                     "P.er:"
+#define MSG_FILCONSUMED                     "F:"
 #define MSG_PREHEAT                         "Preheat"
 #define MSG_PREHEAT_PLA                     "PLA ヨネシ"                    // "Preheat PLA"
 #define MSG_PREHEAT_PLA_ALL                 MSG_PREHEAT_PLA " スベテ"      // " All"

MarlinKimbra/module/language/language_nl.h → MK/module/language/language_nl.h

@@ -33,6 +33,7 @@
 #define MSG_SET_ORIGIN                      "Nulpunt instellen"
 #define MSG_ONFOR                           "On x:"
 #define MSG_PWRCONSUMED                     "P.er:"
+#define MSG_FILCONSUMED                     "F:"
 #define MSG_PREHEAT                         "Preheat"
 #define MSG_PREHEAT_PLA                     "PLA voorverwarmen"
 #define MSG_PREHEAT_PLA_ALL                 "PLA voorverw. aan"

MarlinKimbra/module/language/language_pl.h → MK/module/language/language_pl.h

@@ -33,6 +33,7 @@
 #define MSG_SET_ORIGIN                      "Ustaw punkt zero"
 #define MSG_ONFOR                           "On x:"
 #define MSG_PWRCONSUMED                     "P.er:"
+#define MSG_FILCONSUMED                     "F:"
 #define MSG_PREHEAT                         "Preheat"
 #define MSG_PREHEAT_PLA                     "Rozgrzej PLA"
 #define MSG_PREHEAT_PLA_ALL                 "Roz. PLA Wszystko"

MarlinKimbra/module/language/language_pt-br.h → MK/module/language/language_pt-br.h

@@ -33,6 +33,7 @@
 #define MSG_SET_ORIGIN                      "Estabelecer orig."
 #define MSG_ONFOR                           "On x:"
 #define MSG_PWRCONSUMED                     "P.er:"
+#define MSG_FILCONSUMED                     "F:"
 #define MSG_PREHEAT                         "Pre-aq."
 #define MSG_PREHEAT_PLA                     MSG_PREHEAT " PLA"
 #define MSG_PREHEAT_PLA_ALL                 MSG_PREHEAT_PLA " Tudo"

MarlinKimbra/module/language/language_pt.h → MK/module/language/language_pt.h

@@ -33,6 +33,7 @@
 #define MSG_SET_ORIGIN                      "Estabelecer orig."
 #define MSG_ONFOR                           "On x:"
 #define MSG_PWRCONSUMED                     "P.er:"
+#define MSG_FILCONSUMED                     "F:"
 #define MSG_PREHEAT                         "Pre-aq."
 #define MSG_PREHEAT_PLA                     MSG_PREHEAT " PLA"
 #define MSG_PREHEAT_PLA_ALL                 MSG_PREHEAT_PLA " Tudo"

MarlinKimbra/module/language/language_ru.h → MK/module/language/language_ru.h

@@ -33,6 +33,7 @@
 #define MSG_SET_ORIGIN                      "Запомнить ноль"
 #define MSG_ONFOR                           "On x:"
 #define MSG_PWRCONSUMED                     "P.er:"
+#define MSG_FILCONSUMED                     "F:"
 #define MSG_PREHEAT                         "Преднаг"
 #define MSG_PREHEAT_PLA                     MSG_PREHEAT " PLA"
 #define MSG_PREHEAT_PLA_ALL                 MSG_PREHEAT_PLA " все"

MarlinKimbra/module/lcd/ultralcd.cpp → MK/module/lcd/ultralcd.cpp

@@ -1132,6 +1132,13 @@ static void lcd_stats_menu() {
     sprintf_P(row, PSTR(MSG_PWRCONSUMED " %iWh"), power_consumption_hour);
     LCD_Printpos(0, 1); lcd_print(row);
   #endif
+  char lung[30];
+  unsigned int  kmeter = (long)printer_usage_filament / 1000 / 1000,
+                meter = ((long)printer_usage_filament / 1000) % 1000,
+                centimeter = ((long)printer_usage_filament / 10) % 100,
+                millimeter = ((long)printer_usage_filament) % 10;
+  sprintf_P(lung, PSTR(MSG_FILCONSUMED "%i Km %i m %i cm %i mm"), kmeter, meter, centimeter, millimeter);
+  LCD_Printpos(0, 2); lcd_print(lung);
   if (LCD_CLICKED) lcd_goto_menu(lcd_main_menu);
 }
 

MK/module/nextion/NexButton.cpp

+/**
+ * @file NexButton.cpp
+ *
+ * The implementation of class NexButton. 
+ *
+ * @author  Wu Pengfei (email:<pengfei.wu@itead.cc>)
+ * @date    2015/8/13
+ * @copyright 
+ * Copyright (C) 2014-2015 ITEAD Intelligent Systems Co., Ltd. \n
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include "NexButton.h"
+
+NexButton::NexButton(uint8_t pid, uint8_t cid, const char *name)
+    :NexTouch(pid, cid, name)
+{
+}
+
+uint16_t NexButton::getText(char *buffer, uint16_t len)
+{
+    String cmd;
+    cmd += "get ";
+    cmd += getObjName();
+    cmd += ".txt";
+    sendCommand(cmd.c_str());
+    return recvRetString(buffer,len);
+}
+
+bool NexButton::setText(const char *buffer)
+{
+    String cmd;
+    cmd += getObjName();
+    cmd += ".txt=\"";
+    cmd += buffer;
+    cmd += "\"";
+    sendCommand(cmd.c_str());
+    return recvRetCommandFinished();
+}

MK/module/nextion/NexButton.h

+/**
+ * @file NexButton.h
+ *
+ * The definition of class NexButton. 
+ *
+ * @author Wu Pengfei (email:<pengfei.wu@itead.cc>)
+ * @date 2015/8/13
+ *
+ * @copyright 
+ * Copyright (C) 2014-2015 ITEAD Intelligent Systems Co., Ltd. \n
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef __NEXBUTTON_H__
+#define __NEXBUTTON_H__
+
+#include "NexTouch.h"
+#include "NexHardware.h"
+/**
+ * @addtogroup Component 
+ * @{ 
+ */
+
+/**
+ * NexButton component. 
+ *
+ * Commonly, you want to do something after push and pop it. It is recommanded that only
+ * call @ref NexTouch::attachPop to satisfy your purpose. 
+ * 
+ * @warning Please do not call @ref NexTouch::attachPush on this component, even though you can. 
+ */
+class NexButton: public NexTouch
+{
+public: /* methods */
+
+    /**
+     * @copydoc NexObject::NexObject(uint8_t pid, uint8_t cid, const char *name);
+     */
+    NexButton(uint8_t pid, uint8_t cid, const char *name);
+
+    /**
+     * Get text attribute of component.
+     *
+     * @param buffer - buffer storing text returned. 
+     * @param len - length of buffer. 
+     * @return The real length of text returned. 
+     */
+    uint16_t getText(char *buffer, uint16_t len);    
+
+    /**
+     * Set text attribute of component.
+     *
+     * @param buffer - text buffer terminated with '\0'. 
+     * @return true if success, false for failure. 
+     */
+    bool setText(const char *buffer);    
+};
+/**
+ * @}
+ */
+
+
+#endif /* #ifndef __NEXBUTTON_H__ */

MK/module/nextion/NexConfig.h

+/**
+ * @file NexConfig.h
+ *
+ * Options for user can be found here. 
+ *
+ * @author  Wu Pengfei (email:<pengfei.wu@itead.cc>)
+ * @date    2015/8/13
+ * @copyright 
+ * Copyright (C) 2014-2015 ITEAD Intelligent Systems Co., Ltd. \n
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+ 
+#include "../../base.h"
+
+#ifndef __NEXCONFIG_H__
+#define __NEXCONFIG_H__
+
+#if NEXTION_SERIAL > 0
+  #if NEXTION_SERIAL == 1
+    #define nexSerial Serial1
+  #elif NEXTION_SERIAL == 2
+    #define nexSerial Serial2
+  #elif NEXTION_SERIAL == 3
+    #define nexSerial Serial3
+  #endif
+#else
+  #define nexSerial Serial1
+#endif
+
+#define dbSerialPrint(a)    {}
+#define dbSerialPrintln(a)  {}
+#define dbSerialBegin(a)    {}
+
+#endif //__NEXCONFIG_H__

MK/module/nextion/NexCrop.cpp

+/**
+ * @file NexCrop.cpp
+ *
+ * The implementation of class NexCrop. 
+ *
+ * @author  Wu Pengfei (email:<pengfei.wu@itead.cc>)
+ * @date    2015/8/13
+ * @copyright 
+ * Copyright (C) 2014-2015 ITEAD Intelligent Systems Co., Ltd. \n
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include "NexCrop.h"
+
+NexCrop::NexCrop(uint8_t pid, uint8_t cid, const char *name)
+    :NexTouch(pid, cid, name)
+{
+}
+
+bool NexCrop::getPic(uint32_t *number)
+{
+    String cmd = String("get ");
+    cmd += getObjName();
+    cmd += ".picc";
+    sendCommand(cmd.c_str());
+    return recvRetNumber(number);
+}
+
+bool NexCrop::setPic(uint32_t number)
+{
+    char buf[10] = {0};
+    String cmd;
+    
+    utoa(number, buf, 10);
+    cmd += getObjName();
+    cmd += ".picc=";
+    cmd += buf;
+
+    sendCommand(cmd.c_str());
+    return recvRetCommandFinished();
+}
+

MK/module/nextion/NexCrop.h

+/**
+ * @file NexCrop.h
+ *
+ * The definition of class NexCrop. 
+ *
+ * @author Wu Pengfei (email:<pengfei.wu@itead.cc>)
+ * @date 2015/8/13
+ *
+ * @copyright 
+ * Copyright (C) 2014-2015 ITEAD Intelligent Systems Co., Ltd. \n
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef __NEXCROP_H__
+#define __NEXCROP_H__
+
+#include "NexTouch.h"
+#include "NexHardware.h"
+/**
+ * @addtogroup Component 
+ * @{ 
+ */
+
+/**
+ * NexCrop component. 
+ */
+class NexCrop: public NexTouch
+{
+public: /* methods */
+
+    /**
+     * @copydoc NexObject::NexObject(uint8_t pid, uint8_t cid, const char *name);
+     */
+    NexCrop(uint8_t pid, uint8_t cid, const char *name);
+
+    /**
+     * Get the number of picture. 
+     *
+     * @param number - an output parameter to save the number of picture. 
+     * 
+     * @retval true - success. 
+     * @retval false - failed. 
+     */
+    bool getPic(uint32_t *number);
+    
+    /**
+     * Set the number of picture. 
+     *
+     * @param number - the number of picture. 
+     * 
+     * @retval true - success. 
+     * @retval false - failed. 
+     */
+    bool setPic(uint32_t number);
+};
+
+/**
+ * @}
+ */
+
+#endif /* #ifndef __NEXCROP_H__ */

MK/module/nextion/NexDualStateButton.cpp

+/**
+ * @file NexDualStateButton.cpp
+ *
+ * The implementation of class NexDSButton.
+ *
+ * @author  huang xianming (email:<xianming.huang@itead.cc>)
+ * @date    2015/11/11
+ * @copyright
+ * Copyright (C) 2014-2015 ITEAD Intelligent Systems Co., Ltd.
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include "NexDualStateButton.h"
+
+NexDSButton::NexDSButton(uint8_t pid, uint8_t cid, const char *name)
+    :NexTouch(pid, cid, name)
+{
+}
+
+bool NexDSButton::getValue(uint32_t *number)
+{
+    String cmd = String("get ");
+    cmd += getObjName();
+    cmd += ".val";
+    sendCommand(cmd.c_str());
+    return recvRetNumber(number);
+}
+
+bool NexDSButton::setValue(uint32_t number)
+{
+    char buf[10] = {0};
+    String cmd;
+
+    utoa(number, buf, 10);
+    cmd += getObjName();
+    cmd += ".val=";
+    cmd += buf;
+
+    sendCommand(cmd.c_str());
+    return recvRetCommandFinished();
+}

MK/module/nextion/NexDualStateButton.h

+/**
+ * @file NexDualStateButton.h
+ *
+ * The definition of class NexDSButton.
+ *
+ * @author  huang xianming (email:<xianming.huang@itead.cc>)
+ * @date    2015/11/11
+ *
+ *
+ * @copyright
+ * Copyright (C) 2014-2015 ITEAD Intelligent Systems Co., Ltd.
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef __NEXDSBUTTON_H__
+#define __NEXDSBUTTON_H__
+
+#include "NexTouch.h"
+#include "NexHardware.h"
+/**
+ * @addtogroup Component
+ * @{
+ */
+
+/**
+ * NexDSButton component.
+ *
+ * Commonly, you want to do something after push and pop it. It is recommanded that only
+ * call @ref NexTouch::attachPop to satisfy your purpose.
+ *
+ * @warning Please do not call @ref NexTouch::attachPush on this component, even though you can.
+ */
+class NexDSButton: public NexTouch
+{
+public: /* methods */
+    /**
+     * @copydoc NexObject::NexObject(uint8_t pid, uint8_t cid, const char *name);
+     */
+    NexDSButton(uint8_t pid, uint8_t cid, const char *name);
+
+    /**
+     * Get number attribute of component.
+     *
+     * @param buffer - buffer storing text returned.
+     * @param len - length of buffer.
+     * @return The real length of text returned.
+     */
+    bool getValue(uint32_t *number);
+
+    /**
+     * Set number attribute of component.
+     *
+     * @param buffer - number buffer.
+     * @return true if success, false for failure.
+     */
+    bool setValue(uint32_t number);
+};
+/**
+ * @}
+ */
+
+
+
+#endif /* #ifndef __NEXDSBUTTON_H__ */

MK/module/nextion/NexGauge.cpp

+/**
+ * @file NexGauge.cpp
+ *
+ * The implementation of class NexGauge. 
+ *
+ * @author  Wu Pengfei (email:<pengfei.wu@itead.cc>)
+ * @date    2015/8/13
+ * @copyright 
+ * Copyright (C) 2014-2015 ITEAD Intelligent Systems Co., Ltd. \n
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include "NexGauge.h"
+
+NexGauge::NexGauge(uint8_t pid, uint8_t cid, const char *name)
+    :NexObject(pid, cid, name)
+{
+}
+
+bool NexGauge::getValue(uint32_t *number)
+{
+    String cmd = String("get ");
+    cmd += getObjName();
+    cmd += ".val";
+    sendCommand(cmd.c_str());
+    return recvRetNumber(number);
+}
+
+bool NexGauge::setValue(uint32_t number)
+{
+    char buf[10] = {0};
+    String cmd;
+    
+    utoa(number, buf, 10);
+    cmd += getObjName();
+    cmd += ".val=";
+    cmd += buf;
+
+    sendCommand(cmd.c_str());
+    return recvRetCommandFinished();
+}
+