Skip to content

M
MarlinKimbra
Commit 0399e36f authored by MagoKimbra's avatar MagoKimbra
Browse files
Options

Merge remote-tracking branch 'refs/remotes/origin/master' into dev

parents 366fe4a4 184769cb
Expand all Show whitespace changes
Inline Side-by-side
Showing with 4051 additions and 827 deletions
Documentation/GCodes.md
View file @ 0399e36f
......@@ -7,9 +7,10 @@
* G2 - CW ARC
* G3 - CCW ARC
* G4 - Dwell S[seconds] or P[milliseconds], delay in Second or Millisecond
* G7 - Laser raster base64
* G10 - retract filament according to settings of M207
* G11 - retract recover filament according to settings of M208
* G28 - X0 Y0 Z0 Home all Axis. G28 M for bed manual setting with LCD.
* G28 - X Y Z Home all Axis. M for bed manual setting with LCD. B return to back point
* G29 - Detailed Z-Probe, probes the bed at 3 points or grid. You must be at the home position for this to work correctly.
G29 Fyyy Lxxx Rxxx Byyy for customer grid.
* G30 - Single Z Probe, probes bed at current XY location. Bed Probe and Delta geometry Autocalibration G30 A
......@@ -45,7 +46,8 @@
* M32 - Make directory
* M35 - Upload Firmware to Nextion from SD
* M42 - Change pin status via gcode Use M42 Px Sy to set pin x to value y, when omitting Px the onboard led will be used.
* M49 - Z probe repetability test
* M48 - Measure Z_Probe repeatability. M48 [P # of points] [X position] [Y position] [V_erboseness #] [E_ngage Probe] [L # of legs of travel]
* M70 - Power consumption sensor calibration
* M80 - Turn on Power Supply
* M81 - Turn off Power, including Power Supply, if possible
* M82 - Set E codes absolute (default)
......@@ -58,26 +60,29 @@
* M98 - Print Hysteresis value
* M99 - Set Hysteresis parameter M99 X<in mm> Y<in mm> Z<in mm> E<in mm>
* M100 - Watch Free Memory (For Debugging Only)
* M104 - Set extruder target temp
* M104 - Set hotend target temp
* M105 - Read current temp
* M106 - Fan on
* M107 - Fan off
* M109 - S[xxx] Wait for extruder current temp to reach target temp. Waits only when heating
- R[xxx] Wait for extruder current temp to reach target temp. Waits when heating and cooling
* M111 - Debug Dryrun Repetier
* M109 - S[xxx] Wait for hotend current temp to reach target temp. Waits only when heating
- R[xxx] Wait for hotend current temp to reach target temp. Waits when heating and cooling
* M110 - Set the current line number
* M111 - Set debug flags with S<mask>.
* M112 - Emergency stop
* M114 - Output current position to serial port, (V)erbose for user
* M114 - Output current position to serial port
* M115 - Capabilities string
* M117 - display message
* M117 - Display a message on the controller screen
* M119 - Output Endstop status to serial port
* M120 - Disable Endstop
* M121 - Enable Endstop
* M120 - Enable endstop detection
* M121 - Disable endstop detection
* M122 - S<1=true/0=false> Enable or disable check software endstop
* M126 - Solenoid Air Valve Open (BariCUDA support by jmil)
* M127 - Solenoid Air Valve Closed (BariCUDA vent to atmospheric pressure by jmil)
* M128 - EtoP Open (BariCUDA EtoP = electricity to air pressure transducer by jmil)
* M129 - EtoP Closed (BariCUDA EtoP = electricity to air pressure transducer by jmil)
* M140 - Set bed target temp
* M140 - Set hot bed target temp
* M141 - Set hot chamber target temp
* M142 - Set cooler target temp
* M145 - Set the heatup state H<hotend> B<bed> F<fan speed> for S<material> (0=PLA, 1=ABS)
* M150 - Set BlinkM Color Output R: Red<0-255> U(!): Green<0-255> B: Blue<0-255> over i2c, G for green does not work.
* M163 - Set a single proportion for a mixing extruder. Requires COLOR_MIXING_EXTRUDER.
......@@ -85,6 +90,10 @@
* M165 - Set the proportions for a mixing extruder. Use parameters ABCDHI to set the mixing factors. Requires COLOR_MIXING_EXTRUDER.
* M190 - S[xxx] Wait for bed current temp to reach target temp. Waits only when heating
- R[xxx] Wait for bed current temp to reach target temp. Waits when heating and cooling
* M191 - Sxxx Wait for chamber current temp to reach target temp. Waits only when heating
* Rxxx Wait for chamber current temp to reach target temp. Waits when heating and cooling
* M192 - Sxxx Wait for cooler current temp to reach target temp. Waits only when heating
* Rxxx Wait for cooler current temp to reach target temp. Waits when heating and cooling
* M200 - D[millimeters]- set filament diameter and set E axis units to cubic millimeters (use S0 to set back to millimeters).
* M201 - Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000 Z1000 E0 S1000 E1 S1000 E2 S1000 E3 S1000) in mm/sec^2
* M203 - Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E0 S1000 E1 S1000 E2 S1000 E3 S1000) in mm/sec
......@@ -104,7 +113,9 @@
* M301 - Set PID parameters P I and D
* M302 - Allow cold extrudes
* M303 - PID relay autotune S<temperature> sets the target temperature (default target temperature = 150C). H<hotend> C<cycles> U<Apply result>
* M304 - Set bed PID parameters P I and D
* M304 - Set hot bed PID parameters P I and D
* M305 - Set hot chamber PID parameters P I and D
* M306 - Set cooler PID parameters P I and D
* M350 - Set microstepping mode.
* M351 - Toggle MS1 MS2 pins directly.
* M400 - Finish all moves
......@@ -131,4 +142,5 @@
* M907 - Set digital trimpot motor current using axis codes.
* M908 - Control digital trimpot directly.
* M928 - Start SD logging (M928 filename.g) - ended by M29
* M997 - NPR2 Color rotate
* M999 - Restart after being stopped by error
Documentation/changelog.md
View file @ 0399e36f
### Version 4.2.83
* Add Cooler and Hot Chamber
* Add Laser Beam PWM and raster base64 ONLY ARDUINO MEGA
### Version 4.2.82
* Add DONDOLO_DUAL_MOTOR for DONDOLO bowden and dual extruder
* Add reader TAG width MFRC522
......
MK/Configuration_Basic.h
View file @ 0399e36f
......@@ -7,10 +7,9 @@
* - Board type
* - Mechanism type
* - Extruders number
* - Thermistor type
* - Temperature limits
*
* Mechanisms-settings can be found in Configuration_Xxxxxx.h (where Xxxxxx can be: Cartesian - Delta - Core - Scara)
* Temperature settings can be found in Configuration_Temperature.h
* Feature-settings can be found in Configuration_Feature.h
* Pins-settings can be found in "Configuration_Pins.h"
*/
......@@ -127,118 +126,4 @@
#define DRIVER_EXTRUDERS 1
/***********************************************************************/
/*****************************************************************************************************
************************************** Thermistor type **********************************************
*****************************************************************************************************
* *
* 4.7kohm PULLUP! *
* This is a normal value, if you use a 1k pullup thermistor see below *
* Please choose the one that matches your setup and set to TEMP_SENSOR_. *
* *
* Temperature sensor settings (4.7kohm PULLUP): *
* -2 is thermocouple with MAX6675 (only for sensor 0) *
* -1 is thermocouple with AD595 or AD597 *
* 0 is not used *
* 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup) *
* 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) *
* 3 is Mendel-parts thermistor (4.7k pullup) *
* 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! *
* 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup) *
* 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) *
* 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) *
* 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) *
* 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) *
* 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) *
* 10 is 100k RS thermistor 198-961 (4.7k pullup) *
* 11 is 100k beta 3950 1% thermistor (4.7k pullup) *
* 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) *
* 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" *
* 20 is the PT100 circuit found in the Ultimainboard V2.x *
* 40 is the 10k Carel NTC015WH01 or ELIWELL SN8T6A1502 (4.7k pullup) *
* 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 *
* *
* 1kohm PULLUP! *
* This is not normal, you would have to have changed out your 4.7k for 1k *
* (but gives greater accuracy and more stable PID) *
* Please choose the one that matches your setup. *
* *
* Temperature sensor settings (1kohm PULLUP): *
* 51 is 100k thermistor - EPCOS (1k pullup) *
* 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup) *
* 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) *
* *
* 1047 is Pt1000 with 4k7 pullup *
* 1010 is Pt1000 with 1k pullup (non standard) *
* 147 is Pt100 with 4k7 pullup *
* 110 is Pt100 with 1k pullup (non standard) *
* 998 and 999 are Dummy Tables. ALWAYS read 25°C or DUMMY_THERMISTOR_998_VALUE temperature *
* *
*****************************************************************************************************/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
#define TEMP_SENSOR_2 0
#define TEMP_SENSOR_3 0
#define TEMP_SENSOR_BED 0
//These 2 defines help to calibrate the AD595 sensor in case you get wrong temperature measurements.
//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET"
#define TEMP_SENSOR_AD595_OFFSET 0.0
#define TEMP_SENSOR_AD595_GAIN 1.0
// Use it for Testing or Development purposes. NEVER for production machine.
#define DUMMY_THERMISTOR_998_VALUE 25
#define DUMMY_THERMISTOR_999_VALUE 25
//Show Temperature ADC value
//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
//#define SHOW_TEMP_ADC_VALUES
/*****************************************************************************************************/
/***********************************************************************
************************* Temperature limits ***************************
***********************************************************************/
// Hotend temperature must be close to target for this long before M109 returns success
#define TEMP_RESIDENCY_TIME 10 // (seconds)
#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one
#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early.
// Bed temperature must be close to target for this long before M190 returns success
#define TEMP_BED_RESIDENCY_TIME 0 // (seconds)
#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one
#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early.
// When temperature exceeds max temp, your heater will be switched off.
// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure!
// You should use MINTEMP for thermistor short/failure protection.
#define HEATER_0_MAXTEMP 275 // (degC)
#define HEATER_1_MAXTEMP 275 // (degC)
#define HEATER_2_MAXTEMP 275 // (degC)
#define HEATER_3_MAXTEMP 275 // (degC)
#define BED_MAXTEMP 150 // (degC)
// The minimal temperature defines the temperature below which the heater will not be enabled It is used
// to check that the wiring to the thermistor is not broken.
// Otherwise this would lead to the heater being powered on all the time.
#define HEATER_0_MINTEMP 5 // (degC)
#define HEATER_1_MINTEMP 5 // (degC)
#define HEATER_2_MINTEMP 5 // (degC)
#define HEATER_3_MINTEMP 5 // (degC)
#define BED_MINTEMP 5 // (degC)
//Preheat Constants
#define PLA_PREHEAT_HOTEND_TEMP 190
#define PLA_PREHEAT_HPB_TEMP 60
#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
#define ABS_PREHEAT_HOTEND_TEMP 240
#define ABS_PREHEAT_HPB_TEMP 100
#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
#define GUM_PREHEAT_HOTEND_TEMP 230
#define GUM_PREHEAT_HPB_TEMP 60
#define GUM_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
/*****************************************************************************************************/
#endif
MK/Configuration_Core.h
View file @ 0399e36f
......@@ -239,7 +239,7 @@
/*****************************************************************************************
************************************** MBL or ABL ***************************************
/*****************************************************************************************
*****************************************************************************************
* *
* Manual Bed Leveling (MBL) or Auto Bed Leveling (ABL) settings *
* Set the rectangle in which to probe in MBL or ABL. *
......
MK/Configuration_Feature.h
View file @ 0399e36f
This diff is collapsed.
MK/Configuration_Laser.h 0 → 100644
View file @ 0399e36f
#ifndef CONFIGURATION_LASER
#define CONFIGURATION_LASER
//===========================================================================
//============================= Laser Settings ==============================
//===========================================================================
// The following define selects how to control the laser.
// Please choose the one that matches your setup.
// 1 = Single pin control - LOW when off, HIGH when on, PWM to adjust intensity
// 2 = Two pin control - A firing pin for which LOW = off, HIGH = on, and a seperate intensity pin which carries a constant PWM signal and adjusts duty cycle to control intensity
#define LASER_CONTROL 1
// The following define to use the new HakanBasted laser_pulse method to fire laser. It should be more efficient, but it's less tested.
// Thanks for it to HakanBastedt that has implemented it for Marlin at https://github.com/HakanBastedt/Marlin
// Uncomment to enable it *USE AT YOUR OWN RISK*, it should work but it's *NOT WELL TESTED YET*
//#define LASER_PULSE_METHOD
// If your machine has laser focuser, set this to true and it will use Z axis for focus or disable it.
#define LASER_HAS_FOCUS false
//// In the case that the laserdriver need at least a certain level "LASER_REMAP_INTENSITY"
// to give anything, the intensity can be remapped to start at "LASER_REMAP_INTENSITY"
// At least some CO2-drivers need it, not sure about laserdiode drivers.
#define LASER_REMAP_INTENSITY 7
// Uncomment the following if your laser firing pin (not the PWM pin) for two pin control requires a HIGH signal to fire rather than a low (eg Red Sail M300 RS 3040)
// #define HIGH_TO_FIRE
// The following defines select which G codes tell the laser to fire. It's OK to uncomment more than one.
#define LASER_FIRE_G1 10 // fire the laser on a G1 move, extinguish when the move ends
#define LASER_FIRE_SPINDLE 11 // fire the laser on M3, extinguish on M5
#define LASER_FIRE_E 12 // fire the laser when the E axis moves
// Raster mode enables the laser to etch bitmap data at high speeds. Increases command buffer size substantially.
#define LASER_RASTER
#define LASER_MAX_RASTER_LINE 68 // Maximum number of base64 encoded pixels per raster gcode command
#define LASER_RASTER_ASPECT_RATIO 1 // pixels aren't square on most displays, 1.33 == 4:3 aspect ratio.
#define LASER_RASTER_MM_PER_PULSE 0.2 // Can be overridden by providing an R value in M649 command : M649 S17 B2 D0 R0.1 F4000
// Uncomment the following if the laser cutter is equipped with a peripheral relay board
// to control power to an exhaust fan, cooler pump, laser power supply, etc.
//#define LASER_PERIPHERALS
//#define LASER_PERIPHERALS_TIMEOUT 30000 // Number of milliseconds to wait for status signal from peripheral control board
// Uncomment the following line to enable cubic bezier curve movement with the G5 code
// #define G5_BEZIER
// Uncomment these options for the Buildlog.net laser cutter, and other similar models
#define LASER_WATTS 40.0
#define LASER_DIAMETER 0.1 // milimeters
#define LASER_PWM 50000 // hertz
#define LASER_FOCAL_HEIGHT 74.50 // z axis position at which the laser is focused
#endif
MK/Configuration_Pins.h
View file @ 0399e36f
......@@ -69,6 +69,8 @@
#define HEATER_2_PIN ORIG_HEATER_2_PIN
#define HEATER_3_PIN ORIG_HEATER_3_PIN
#define HEATER_BED_PIN ORIG_HEATER_BED_PIN
#define HEATER_CHAMBER_PIN -1
#define COOLER_PIN -1
// TEMP pin
#define TEMP_0_PIN ORIG_TEMP_0_PIN
......@@ -76,6 +78,8 @@
#define TEMP_2_PIN ORIG_TEMP_2_PIN
#define TEMP_3_PIN ORIG_TEMP_3_PIN
#define TEMP_BED_PIN ORIG_TEMP_BED_PIN
#define TEMP_CHAMBER_PIN -1
#define TEMP_COOLER_PIN -1
// FAN pin
#define FAN_PIN ORIG_FAN_PIN
......@@ -106,6 +110,10 @@
#if ENABLED(LASERBEAM)
#define LASER_PWR_PIN -1
#define LASER_TTL_PIN -1
#if ENABLED(LASER_PERIPHERALS)
#define LASER_PERIPHERALS_PIN -1
#define LASER_PERIPHERALS_STATUS_PIN -1
#endif
#endif
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
......@@ -116,6 +124,10 @@
#define FILWIDTH_PIN -1
#endif
#if ENABLED(FLOWMETER_SENSOR)
#define FLOWMETER_PIN -1
#endif
#if ENABLED(POWER_CONSUMPTION)
#define POWER_CONSUMPTION_PIN -1
#endif
......
MK/Configuration_Store.cpp
View file @ 0399e36f
......@@ -95,6 +95,10 @@
*
* PIDTEMPBED:
* M304 PID bedKp, bedKi, bedKd
* PIDTEMPCHAMBER
* M305 PID chamberKp, chamberKi, chamberKd
* PIDTEMPCOOLER
* M306 PID coolerKp, coolerKi, coolerKd
*
* DOGLCD:
* M250 C lcd_contrast
......@@ -232,6 +236,18 @@ void Config_StoreSettings() {
EEPROM_WRITE_VAR(i, bedKd);
#endif
#if ENABLED(PIDTEMPCHAMBER)
EEPROM_WRITE_VAR(i, chamberKp);
EEPROM_WRITE_VAR(i, chamberKi);
EEPROM_WRITE_VAR(i, chamberKd);
#endif
#if ENABLED(PIDTEMPCOOLER)
EEPROM_WRITE_VAR(i, coolerKp);
EEPROM_WRITE_VAR(i, coolerKi);
EEPROM_WRITE_VAR(i, coolerKd);
#endif
#if HASNT(LCD_CONTRAST)
const int lcd_contrast = 32;
#endif
......@@ -381,6 +397,18 @@ void Config_RetrieveSettings() {
EEPROM_READ_VAR(i, bedKd);
#endif
#if ENABLED(PIDTEMPCHAMBER)
EEPROM_READ_VAR(i, chamberKp);
EEPROM_READ_VAR(i, chamberKi);
EEPROM_READ_VAR(i, chamberKd);
#endif
#if ENABLED(PIDTEMPCOOLER)
EEPROM_READ_VAR(i, coolerKp);
EEPROM_READ_VAR(i, coolerKi);
EEPROM_READ_VAR(i, coolerKd);
#endif
#if HASNT(LCD_CONTRAST)
int lcd_contrast;
#endif
......@@ -575,6 +603,18 @@ void Config_ResetDefault() {
bedKd = scalePID_d(DEFAULT_bedKd);
#endif
#if ENABLED(PIDTEMPCHAMBER)
chamberKp = DEFAULT_chamberKp;
chamberKi = scalePID_i(DEFAULT_chamberKi);
chamberKd = scalePID_d(DEFAULT_chamberKd);
#endif
#if ENABLED(PIDTEMPCOOLER)
coolerKp = DEFAULT_coolerKp;
coolerKi = scalePID_i(DEFAULT_coolerKi);
coolerKd = scalePID_d(DEFAULT_coolerKd);
#endif
#if ENABLED(FWRETRACT)
autoretract_enabled = false;
retract_length = RETRACT_LENGTH;
......@@ -777,7 +817,7 @@ void Config_ResetDefault() {
ECHO_EM(" (Material GUM)");
#endif // ULTIPANEL
#if ENABLED(PIDTEMP) || ENABLED(PIDTEMPBED)
#if ENABLED(PIDTEMP) || ENABLED(PIDTEMPBED) || ENABLED(PIDTEMPCHAMBER) || ENABLED(PIDTEMPCOOLER)
if (!forReplay) {
ECHO_LM(CFG, "PID settings:");
}
......@@ -797,10 +837,21 @@ void Config_ResetDefault() {
#endif
#endif
#if ENABLED(PIDTEMPBED)
ECHO_SMV(CFG, " M304 P", bedKp); // for compatibility with hosts, only echos values for E0
ECHO_SMV(CFG, " M304 P", bedKp);
ECHO_MV(" I", unscalePID_i(bedKi));
ECHO_EMV(" D", unscalePID_d(bedKd));
#endif
#if ENABLED(PIDTEMPCHAMBER)
ECHO_SMV(CFG, " M305 P", chamberKp);
ECHO_MV(" I", unscalePID_i(chamberKi));
ECHO_EMV(" D", unscalePID_d(chamberKd));
#endif
#if ENABLED(PIDTEMPCOOLER)
ECHO_SMV(CFG, " M306 P", coolerKp);
ECHO_MV(" I", unscalePID_i(coolerKi));
ECHO_EMV(" D", unscalePID_d(coolerKd));
#endif
#endif
#if ENABLED(FWRETRACT)
......
MK/Configuration_Temperature.h 0 → 100644
View file @ 0399e36f
This diff is collapsed.
MK/Configuration_Version.h
View file @ 0399e36f
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* MK & MK4due 3D Printer Firmware
*
* Based on Sprinter and grbl.
* Based on Marlin, Sprinter and grbl
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (C) 2013 - 2016 Alberto Cotronei @MagoKimbra
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -24,7 +24,7 @@
#define CONFIGURATION_VERSION_H
#define FIRMWARE_NAME "MK"
#define SHORT_BUILD_VERSION "4.2.82_dev"
#define SHORT_BUILD_VERSION "4.2.83_dev"
#define BUILD_VERSION FIRMWARE_NAME "_" SHORT_BUILD_VERSION
#define STRING_DISTRIBUTION_DATE __DATE__ " " __TIME__ // build date and time
// It might also be appropriate to define a location where additional information can be found
......
MK/MK.ino
View file @ 0399e36f
......@@ -35,13 +35,14 @@
* "G" Codes
*
* G0 -> G1
* G1 - Coordinated Movement X Y Z E
* G1 - Coordinated Movement X Y Z E F(feedrate) P(Purge)
* G2 - CW ARC
* G3 - CCW ARC
* G4 - Dwell S<seconds> or P<milliseconds>
* G4 - Dwell S[seconds] or P[milliseconds], delay in Second or Millisecond
* G7 - Laser raster base64
* G10 - retract filament according to settings of M207
* G11 - retract recover filament according to settings of M208
* G28 - Home one or more axes
* G28 - X Y Z Home all Axis. M for bed manual setting with LCD. B return to back point
* G29 - Detailed Z-Probe, probes the bed at 3 or more points. Will fail if you haven't homed yet.
* G30 - Single Z Probe, probes bed at current XY location. - Bed Probe and Delta geometry Autocalibration
* G31 - Dock sled (Z_PROBE_SLED only)
......@@ -96,15 +97,15 @@
* M98 - Print Hysteresis value
* M99 - Set Hysteresis parameter M99 X<in mm> Y<in mm> Z<in mm> E<in mm>
* M100 - Watch Free Memory (For Debugging Only)
* M104 - Set extruder target temp
* M104 - Set hotend target temp
* M105 - Read current temp
* M106 - Fan on
* M107 - Fan off
* M109 - Sxxx Wait for extruder current temp to reach target temp. Waits only when heating
* Rxxx Wait for extruder current temp to reach target temp. Waits when heating and cooling
* M109 - Sxxx Wait for hotend current temp to reach target temp. Waits only when heating
* Rxxx Wait for hotend current temp to reach target temp. Waits when heating and cooling
* IF AUTOTEMP is enabled, S<mintemp> B<maxtemp> F<factor>. Exit autotemp by any M109 without F
* M110 - Set the current line number
* M111 - Set debug flags with S<mask>. See flag bits defined in Marlin.h.
* M111 - Set debug flags with S<mask>.
* M112 - Emergency stop
* M114 - Output current position to serial port
* M115 - Capabilities string
......@@ -117,7 +118,9 @@
* M127 - Solenoid Air Valve Closed (BariCUDA vent to atmospheric pressure by jmil)
* M128 - EtoP Open (BariCUDA EtoP = electricity to air pressure transducer by jmil)
* M129 - EtoP Closed (BariCUDA EtoP = electricity to air pressure transducer by jmil)
* M140 - Set bed target temp
* M140 - Set hot bed target temp
* M141 - Set hot chamber target temp
* M142 - Set cooler target temp
* M145 - Set the heatup state H<hotend> B<bed> F<fan speed> for S<material> (0=PLA, 1=ABS)
* M150 - Set BlinkM Color Output R: Red<0-255> U(!): Green<0-255> B: Blue<0-255> over i2c, G for green does not work.
* M163 - Set a single proportion for a mixing extruder. Requires COLOR_MIXING_EXTRUDER.
......@@ -125,6 +128,10 @@
* M165 - Set the proportions for a mixing extruder. Use parameters ABCDHI to set the mixing factors. Requires COLOR_MIXING_EXTRUDER.
* M190 - Sxxx Wait for bed current temp to reach target temp. Waits only when heating
* Rxxx Wait for bed current temp to reach target temp. Waits when heating and cooling
* M191 - Sxxx Wait for chamber current temp to reach target temp. Waits only when heating
* Rxxx Wait for chamber current temp to reach target temp. Waits when heating and cooling
* M192 - Sxxx Wait for cooler current temp to reach target temp. Waits only when heating
* Rxxx Wait for cooler current temp to reach target temp. Waits when heating and cooling
* M200 - set filament diameter and set E axis units to cubic millimeters (use S0 to set back to millimeters).:D<millimeters>-
* M201 - Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000)
* M202 - Set max acceleration in units/s^2 for travel moves (M202 X1000 Y1000) Unused in Marlin!!
......@@ -137,8 +144,8 @@
* M209 - S<1=true/0=false> enable automatic retract detect if the slicer did not support G10/11: every normal extrude-only move will be classified as retract depending on the direction.
* M218 - Set hotend offset (in mm): T<extruder_number> X<offset_on_X> Y<offset_on_Y>
* M220 - Set speed factor override percentage: S<factor in percent>
* M221 - Set extrude factor override percentage: S<factor in percent>
* M222 - Set density extrusion percentage for purge: S<factor in percent>
* M221 - T<extruder> S<factor in percent> - set extrude factor override percentage
* M222 - T<extruder> S<factor in percent> - set density extrude factor percentage for purge
* M226 - Wait until the specified pin reaches the state required: P<pin number> S<pin state>
* M240 - Trigger a camera to take a photograph
* M250 - Set LCD contrast C<contrast value> (value 0..63)
......@@ -147,7 +154,9 @@
* M301 - Set PID parameters P I D and C
* M302 - Allow cold extrudes, or set the minimum extrude S<temperature>.
* M303 - PID relay autotune S<temperature> sets the target temperature (default target temperature = 150C). H<hotend> C<cycles> U<Apply result>
* M304 - Set bed PID parameters P I and D
* M304 - Set hot bed PID parameters P I and D
* M305 - Set hot chamber PID parameters P I and D
* M306 - Set cooler PID parameters P I and D
* M350 - Set microstepping mode.
* M351 - Toggle MS1 MS2 pins directly.
* M380 - Activate solenoid on active extruder
......
MK/base.h
View file @ 0399e36f
......@@ -35,9 +35,18 @@
#include "Configuration_Scara.h"
#endif
#include "Configuration_Temperature.h"
#include "Configuration_Feature.h"
#include "Configuration_Overall.h"
#if ENABLED(LASERBEAM)
#include "Configuration_Laser.h"
#if ENABLED(LASER_RASTER)
#include "module/laser/base64/base64.h"
#endif
#include "module/laser/laser.h"
#endif
#include "module/conditionals.h"
#include "module/sanitycheck.h"
#include "module/HAL/HAL.h"
......@@ -56,6 +65,7 @@
#include "module/motion/qr_solve.h"
#include "module/motion/cartesian_correction.h"
#include "module/temperature/temperature.h"
#include "module/sensor/flowmeter.h"
#include "module/temperature/thermistortables.h"
#include "module/lcd/ultralcd.h"
#include "module/lcd/buzzer.h"
......
MK/module/HAL/HardwareSerial.h
View file @ 0399e36f
/*
HardwareSerial.h - Hardware serial library for Wiring
Copyright (c) 2006 Nicholas Zambetti. All right reserved.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Modified 28 September 2010 by Mark Sproul
*/
/**
* MK & MK4due 3D Printer Firmware
*
* Based on Marlin, Sprinter and grbl
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (C) 2013 - 2016 Alberto Cotronei @MagoKimbra
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* HardwareSerial.h - Hardware serial library for Wiring
* Copyright (c) 2006 Nicholas Zambetti. All right reserved.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Modified 28 September 2010 by Mark Sproul
* Modified 3 March 2015 by MagoKimbra
*/
#ifndef HardwareSerial_H
#define HardwareSerial_H
......
MK/module/MK_Main.cpp
View file @ 0399e36f
This diff is collapsed.
MK/module/MK_Main.h
View file @ 0399e36f
......@@ -116,7 +116,7 @@ inline void refresh_cmd_timeout() { previous_cmd_ms = millis(); }
extern void delay_ms(millis_t ms);
#if ENABLED(FAST_PWM_FAN)
#if ENABLED(FAST_PWM_FAN) || ENABLED(FAST_PWM_COOLER)
void setPwmFrequency(uint8_t pin, uint8_t val);
#endif
......@@ -236,10 +236,6 @@ extern int fanSpeed;
extern bool allow_lengthy_extrude_once; // for load/unload
#endif
#if ENABLED(LASERBEAM)
extern int laser_ttl_modulation;
#endif
// Print job timer
extern PrintCounter print_job_counter;
......@@ -261,6 +257,18 @@ extern uint8_t active_driver;
void print_heaterstates();
#endif
#if HAS(TEMP_CHAMBER)
void print_chamberstate();
#endif
#if HAS(TEMP_COOLER)
void print_coolerstate();
#endif
#if ENABLED(FLOWMETER_SENSOR)
void print_flowratestate();
#endif
#if ENABLED(FIRMWARE_TEST)
void FirmwareTest();
#endif
......
MK/module/boards/403.h
View file @ 0399e36f
......@@ -13,7 +13,9 @@
#if MB(RAMPS_FD_V1)
#define RAMPS_FD_V1
#define INVERTED_HEATER_PINS
#define INVERTED_BED_PINS
#define INVERTED_BED_PIN
#define INVERTED_CHAMBER_PIN
#define INVERTED_COOLER_PIN
// No EEPROM
// Use 4k7 thermistor tables
#else
......
MK/module/boards/404.h
View file @ 0399e36f
......@@ -13,7 +13,9 @@
#if MB(RAMPS_FD_V1)
#define RAMPS_FD_V1
#define INVERTED_HEATER_PINS
#define INVERTED_BED_PINS
#define INVERTED_BED_PIN
#define INVERTED_CHAMBER_PIN
#define INVERTED_COOLER_PIN
// No EEPROM
// Use 4k7 thermistor tables
#else
......
MK/module/conditionals.h
View file @ 0399e36f
......@@ -605,6 +605,32 @@
#define BED_USES_THERMISTOR
#endif
#if TEMP_SENSOR_CHAMBER == -1
#define CHAMBER_USES_AD595
#elif TEMP_SENSOR_CHAMBER == 0
#undef CHAMBER_MINTEMP
#undef CHAMBER_MAXTEMP
#elif TEMP_SENSOR_CHAMBER > 0
#define THERMISTORCHAMBER TEMP_SENSOR_CHAMBER
#define CHAMBER_USES_THERMISTOR
#endif
#if TEMP_SENSOR_COOLER == -1
#define COOLER_USES_AD595
#elif TEMP_SENSOR_COOLER == 0
#undef COOLER_MINTEMP
#undef COOLER_MAXTEMP
#elif TEMP_SENSOR_COOLER > 0
#define THERMISTORCOOLER TEMP_SENSOR_COOLER
#define COOLER_USES_THERMISTOR
#endif
#if HASNT(COOLER)
#if ENABLED(PIDTEMPCOOLER)
#undef PIDTEMPCOOLER
#endif
#endif
#define HEATER_USES_AD595 (ENABLED(HEATER_0_USES_AD595) || ENABLED(HEATER_1_USES_AD595) || ENABLED(HEATER_2_USES_AD595) || ENABLED(HEATER_3_USES_AD595))
/**
......@@ -612,6 +638,7 @@
*/
#define HAS_PID_HEATING (ENABLED(PIDTEMP) || ENABLED(PIDTEMPBED))
#define HAS_PID_FOR_BOTH (ENABLED(PIDTEMP) && ENABLED(PIDTEMPBED))
#define HAS_PID_COOLING (ENABLED(PIDTEMPCOOLER))
/**
* ARRAY_BY_EXTRUDERS based on EXTRUDERS
......@@ -661,11 +688,15 @@
#define HAS_TEMP_2 (PIN_EXISTS(TEMP_2) && TEMP_SENSOR_2 != 0)
#define HAS_TEMP_3 (PIN_EXISTS(TEMP_3) && TEMP_SENSOR_3 != 0)
#define HAS_TEMP_BED (PIN_EXISTS(TEMP_BED) && TEMP_SENSOR_BED != 0)
#define HAS_TEMP_CHAMBER (PIN_EXISTS(TEMP_CHAMBER) && TEMP_SENSOR_CHAMBER != 0)
#define HAS_TEMP_COOLER (PIN_EXISTS(TEMP_COOLER) && TEMP_SENSOR_COOLER != 0)
#define HAS_HEATER_0 (PIN_EXISTS(HEATER_0))
#define HAS_HEATER_1 (PIN_EXISTS(HEATER_1))
#define HAS_HEATER_2 (PIN_EXISTS(HEATER_2))
#define HAS_HEATER_3 (PIN_EXISTS(HEATER_3))
#define HAS_HEATER_BED (PIN_EXISTS(HEATER_BED))
#define HAS_HEATER_CHAMBER (PIN_EXISTS(HEATER_CHAMBER))
#define HAS_COOLER (PIN_EXISTS(COOLER))
#define HAS_AUTO_FAN_0 (ENABLED(EXTRUDER_AUTO_FAN) && PIN_EXISTS(EXTRUDER_0_AUTO_FAN))
#define HAS_AUTO_FAN_1 (ENABLED(EXTRUDER_AUTO_FAN) && PIN_EXISTS(EXTRUDER_1_AUTO_FAN))
#define HAS_AUTO_FAN_2 (ENABLED(EXTRUDER_AUTO_FAN) && PIN_EXISTS(EXTRUDER_2_AUTO_FAN))
......@@ -790,12 +821,26 @@
#define WRITE_HEATER_0(v) WRITE_HEATER_0P(v)
#endif
#if HAS(HEATER_BED)
#if ENABLED(INVERTED_BED_PINS)
#if ENABLED(INVERTED_BED_PIN)
#define WRITE_HEATER_BED(v) WRITE(HEATER_BED_PIN,!v)
#else
#define WRITE_HEATER_BED(v) WRITE(HEATER_BED_PIN,v)
#endif
#endif
#if HAS(HEATER_CHAMBER)
#if ENABLED(INVERTED_CHAMBER_PIN)
#define WRITE_HEATER_CHAMBER(v) WRITE(HEATER_CHAMBER_PIN,!v)
#else
#define WRITE_HEATER_CHAMBER(v) WRITE(HEATER_CHAMBER_PIN,v)
#endif
#endif
#if HAS(COOLER)
#if ENABLED(INVERTED_COOLER_PIN)
#define WRITE_COOLER(v) WRITE(COOLER_PIN,!v)
#else
#define WRITE_COOLER(v) WRITE(COOLER_PIN,v)
#endif
#endif
#if HAS(FAN)
#if ENABLED(INVERTED_HEATER_PINS)
#define WRITE_FAN(v) WRITE(FAN_PIN, !v)
......
MK/module/language/language.h
View file @ 0399e36f
......@@ -94,7 +94,6 @@
#define SERIAL_INVALID_HOTEND "Invalid hotend"
#define SERIAL_INVALID_SOLENOID "Invalid solenoid"
#define SERIAL_ERR_NO_THERMISTORS "No thermistors - no temperature"
#define SERIAL_COUNT_X " Count X: "
#define SERIAL_ERR_KILLED "Printer halted. kill() called!"
#define SERIAL_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
#define SERIAL_BUSY_PROCESSING "processing"
......@@ -168,8 +167,9 @@
#define SERIAL_PID_AUTOTUNE "PID Autotune"
#define SERIAL_PID_AUTOTUNE_START SERIAL_PID_AUTOTUNE " start"
#define SERIAL_PID_AUTOTUNE_FAILED SERIAL_PID_AUTOTUNE " failed!"
#define SERIAL_PID_BAD_EXTRUDER_NUM SERIAL_PID_AUTOTUNE_FAILED " Bad extruder number"
#define SERIAL_PID_BAD_TEMP_CONTROLLER_NUM SERIAL_PID_AUTOTUNE_FAILED " Bad temperature controller number"
#define SERIAL_PID_TEMP_TOO_HIGH SERIAL_PID_AUTOTUNE_FAILED " Temperature too high"
#define SERIAL_PID_TEMP_TOO_LOW SERIAL_PID_AUTOTUNE_FAILED " Temperature too low"
#define SERIAL_PID_TIMEOUT SERIAL_PID_AUTOTUNE_FAILED " timeout"
#define SERIAL_BIAS " bias: "
#define SERIAL_D " d: "
......@@ -182,9 +182,11 @@
#define SERIAL_KI " Ki: "
#define SERIAL_KD " Kd: "
#define SERIAL_T " T:"
#define SERIAL_C " C:"
#define SERIAL_B " B:"
#define SERIAL_AT " @"
#define SERIAL_BAT " B@:"
#define SERIAL_CAT " C@:"
#define SERIAL_W " W:"
#define SERIAL_PID_AUTOTUNE_FINISHED SERIAL_PID_AUTOTUNE " finished! Put the last Kp, Ki and Kd constants from above into Configuration.h or send command M500 for save in EEPROM the new value!"
#define SERIAL_PID_DEBUG " PID_DEBUG "
......@@ -196,8 +198,10 @@
#define SERIAL_PID_DEBUG_CTERM " cTerm "
#define SERIAL_INVALID_EXTRUDER_NUM " - Invalid extruder number !"
#define SERIAL_HEATER_BED "bed"
#define SERIAL_STOPPED_HEATER ", system stopped! Heater_ID: "
#define SERIAL_STOPPED_BED ", system stopped! Bed"
#define SERIAL_STOPPED_CHAMBER ", system stopped! Chamber"
#define SERIAL_STOPPED_COOLER ", system stopped! Cooler"
#define SERIAL_REDUNDANCY "Heater switched off. Temperature difference between temp sensors is too high !"
#define SERIAL_T_HEATING_FAILED "Heating failed"
#define SERIAL_T_THERMAL_RUNAWAY "Thermal Runaway"
......@@ -228,6 +232,8 @@
#define SERIAL_BED_LEVELLING_Y " Y: "
#define SERIAL_BED_LEVELLING_Z " Z: "
#define MSG_COOLER "Cooler"
// LCD Menu Messages
#define LANGUAGE_INCL_(M) STRINGIFY_(language_##M.h)
......
MK/module/language/language_an.h
View file @ 0399e36f
......@@ -181,6 +181,8 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "hours"
#define MSG_END_MINUTE "minutes"
......@@ -218,6 +220,9 @@
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
#define MSG_CONFIG "Configuration"
......
MK/module/language/language_bg.h
View file @ 0399e36f
......@@ -181,6 +181,8 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "часа"
#define MSG_END_MINUTE "минути"
......@@ -218,6 +220,9 @@
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
#define MSG_CONFIG "Configuration"
......
MK/module/language/language_ca.h
View file @ 0399e36f
......@@ -181,6 +181,8 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "hours"
#define MSG_END_MINUTE "minutes"
......@@ -218,6 +220,9 @@
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
#define MSG_CONFIG "Configuration"
......
MK/module/language/language_cn.h
View file @ 0399e36f
......@@ -181,6 +181,8 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "hours"
#define MSG_END_MINUTE "minutes"
......@@ -218,6 +220,10 @@
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
#define MSG_CONFIG "Configuration"
......
MK/module/language/language_cz.h
View file @ 0399e36f
......@@ -183,6 +183,8 @@
#define MSG_ERR_MINTEMP "Chyba: NIZKA TEPLOTA"
#define MSG_ERR_MAXTEMP_BED "Chyba: VYSOKA TEPLOTA PODL."
#define MSG_ERR_MINTEMP_BED "Chyba: NIZKA TEPLOTA PODL."
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "hod"
#define MSG_END_MINUTE "min"
......@@ -220,6 +222,9 @@
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
#define MSG_CONFIG "Configuration"
......
MK/module/language/language_da.h
View file @ 0399e36f
......@@ -181,6 +181,8 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "timer"
#define MSG_END_MINUTE "minutter"
......@@ -217,6 +219,9 @@
#define MSG_HEATING_COMPLETE "Opvarmet"
#define MSG_BED_HEATING "Opvarmer plade"
#define MSG_BED_DONE "Plade opvarmet"
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
......
MK/module/language/language_de.h
View file @ 0399e36f
......@@ -181,6 +181,8 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "tage"
#define MSG_END_HOUR "uur"
#define MSG_END_MINUTE "minuten"
......@@ -217,6 +219,9 @@
#define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
......
MK/module/language/language_en.h
View file @ 0399e36f
......@@ -184,6 +184,10 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_CHAMBER "MAXTEMP CHAMBER ERROR"
#define MSG_ERR_MINTEMP_CHAMBER "MINTEMP CHAMBER ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "hours"
#define MSG_END_MINUTE "minutes"
......@@ -244,6 +248,9 @@
#define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
......
MK/module/language/language_es.h
View file @ 0399e36f
......@@ -181,6 +181,8 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "hours"
#define MSG_END_MINUTE "minutes"
......@@ -217,6 +219,9 @@
#define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
......
MK/module/language/language_eu.h
View file @ 0399e36f
......@@ -181,6 +181,8 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "hours"
#define MSG_END_MINUTE "minutes"
......@@ -217,6 +219,9 @@
#define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
......
MK/module/language/language_fi.h
View file @ 0399e36f
......@@ -181,6 +181,8 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "hours"
#define MSG_END_MINUTE "minutes"
......@@ -217,6 +219,9 @@
#define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
......
MK/module/language/language_fr.h
View file @ 0399e36f
......@@ -181,6 +181,8 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "heures"
#define MSG_END_MINUTE "minutes"
......@@ -217,6 +219,9 @@
#define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
......
MK/module/language/language_gl.h
View file @ 0399e36f
......@@ -155,12 +155,17 @@
#define MSG_ERR_MINTEMP "Err: temp. min."
#define MSG_ERR_MAXTEMP_BED "Err: MAXTEMP BED"
#define MSG_ERR_MINTEMP_BED "Err: MINTEMP BED"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_HOUR "horas"
#define MSG_END_MINUTE "minutos"
#define MSG_HEATING "Quentando..."
#define MSG_HEATING_COMPLETE "Xa esta quente"
#define MSG_BED_HEATING "Quentando cama"
#define MSG_BED_DONE "Cama esta quente"
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
#define MSG_DELTA_CALIBRATE "Calibracion Delta"
#define MSG_DELTA_CALIBRATE_X "Calibrar X"
......
MK/module/language/language_it.h
View file @ 0399e36f
......@@ -181,6 +181,10 @@
#define MSG_ERR_MINTEMP "Err: TEMP MINIMA"
#define MSG_ERR_MAXTEMP_BED "Err: TEMP MASSIMA PIATTO"
#define MSG_ERR_MINTEMP_BED "Err: TEMP MINIMA PIATTO"
#define MSG_ERR_MAXTEMP_CHAMBER "MAXTEMP CHAMBER ERROR"
#define MSG_ERR_MINTEMP_CHAMBER "MINTEMP CHAMBER ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "giorni"
#define MSG_END_HOUR "ore"
#define MSG_END_MINUTE "minuti"
......@@ -241,6 +245,8 @@
#define MSG_HEATING_COMPLETE "Riscaldamento finito."
#define MSG_BED_HEATING "Riscaldamento piatto."
#define MSG_BED_DONE "Piatto riscaldato."
#define MSG_COOLER_COOLING "Raffreddamento..."
#define MSG_COOLER_DONE "Raffreddamento finito."
// Extra
#define MSG_LASER "Laser Preset"
......
MK/module/language/language_kana.h
View file @ 0399e36f
......@@ -183,6 +183,8 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "hours"
#define MSG_END_MINUTE "minutes"
......@@ -219,6 +221,9 @@
#define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
......
MK/module/language/language_kana_utf8.h
View file @ 0399e36f
......@@ -186,6 +186,8 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "hours"
#define MSG_END_MINUTE "minutes"
......@@ -222,6 +224,9 @@
#define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
......
MK/module/language/language_nl.h
View file @ 0399e36f
......@@ -181,6 +181,8 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "hours"
#define MSG_END_MINUTE "minutes"
......@@ -217,6 +219,9 @@
#define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
......
MK/module/language/language_pl.h
View file @ 0399e36f
......@@ -181,6 +181,8 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "hours"
#define MSG_END_MINUTE "minutes"
......@@ -217,6 +219,9 @@
#define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
......
MK/module/language/language_pt-br.h
View file @ 0399e36f
......@@ -181,6 +181,8 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "hours"
#define MSG_END_MINUTE "minutes"
......@@ -217,6 +219,9 @@
#define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
......
MK/module/language/language_pt-br_utf8.h
View file @ 0399e36f
......@@ -157,12 +157,17 @@
#define MSG_ERR_MINTEMP "Err: T Mínima"
#define MSG_ERR_MAXTEMP_BED "Err: T Base Máxima"
#define MSG_ERR_MINTEMP_BED "Err: T Base Mínima"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_HOUR "Horas"
#define MSG_END_MINUTE "Minutos"
#define MSG_HEATING "Aquecendo..."
#define MSG_HEATING_COMPLETE "Aquecida."
#define MSG_BED_HEATING "Aquecendo base.."
#define MSG_BED_DONE "Base aquecida."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
#define MSG_DELTA_CALIBRATE "Calibrar Delta"
#define MSG_DELTA_CALIBRATE_X "Calibrar X"
......
MK/module/language/language_pt.h
View file @ 0399e36f
......@@ -181,6 +181,8 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "hours"
#define MSG_END_MINUTE "minutes"
......@@ -217,6 +219,9 @@
#define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
......
MK/module/language/language_pt_utf8.h
View file @ 0399e36f
......@@ -161,12 +161,17 @@
#define MSG_ERR_MINTEMP "Err: T Mínima"
#define MSG_ERR_MAXTEMP_BED "Err: T Base Máxima"
#define MSG_ERR_MINTEMP_BED "Err: T Base Mínima"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_HOUR "horas"
#define MSG_END_MINUTE "minutos"
#define MSG_HEATING "Aquecendo..."
#define MSG_HEATING_COMPLETE "Aquecida."
#define MSG_BED_HEATING "Aquecendo base.."
#define MSG_BED_DONE "Base aquecida."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
#define MSG_DELTA_CALIBRATE "Calibração Delta"
#define MSG_DELTA_CALIBRATE_X "Calibrar X"
......
MK/module/language/language_ru.h
View file @ 0399e36f
......@@ -181,6 +181,8 @@
#define MSG_ERR_MINTEMP "MINTEMP ERROR"
#define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR"
#define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR"
#define MSG_ERR_MAXTEMP_COOLER "MAXTEMP COOLER ERROR"
#define MSG_ERR_MINTEMP_COOLER "MINTEMP COOLER ERROR"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "hours"
#define MSG_END_MINUTE "minutes"
......@@ -217,6 +219,9 @@
#define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_COOLER_COOLING "Cooling..."
#define MSG_COOLER_DONE "Cooling done."
// Extra
#define MSG_LASER "Laser Preset"
......
MK/module/laser/base64/base64.cpp 0 → 100644
View file @ 0399e36f
/**
* MK & MK4due 3D Printer Firmware
*
* Based on Marlin, Sprinter and grbl
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (C) 2013 - 2016 Alberto Cotronei @MagoKimbra
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "base64.h"
const char b64_alphabet[] = "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
"abcdefghijklmnopqrstuvwxyz"
"0123456789+/";
/* 'Private' declarations */
inline void a3_to_a4(unsigned char * a4, unsigned char * a3);
inline void a4_to_a3(unsigned char * a3, unsigned char * a4);
inline unsigned char b64_lookup(char c);
int base64_encode(char *output, char *input, int inputLen) {
int i = 0, j = 0;
int encLen = 0;
unsigned char a3[3];
unsigned char a4[4];
while(inputLen--) {
a3[i++] = *(input++);
if(i == 3) {
a3_to_a4(a4, a3);
for(i = 0; i < 4; i++) {
output[encLen++] = b64_alphabet[a4[i]];
}
i = 0;
}
}
if(i) {
for(j = i; j < 3; j++) {
a3[j] = '\0';
}
a3_to_a4(a4, a3);
for(j = 0; j < i + 1; j++) {
output[encLen++] = b64_alphabet[a4[j]];
}
while((i++ < 3)) {
output[encLen++] = '=';
}
}
output[encLen] = '\0';
return encLen;
}
int base64_decode(unsigned char * output, char * input, int inputLen) {
int i = 0, j = 0;
int decLen = 0;
unsigned char a3[3];
unsigned char a4[4];
while (inputLen--) {
if(*input == '=') {
break;
}
a4[i++] = *(input++);
if (i == 4) {
for (i = 0; i <4; i++) {
a4[i] = b64_lookup(a4[i]);
}
a4_to_a3(a3,a4);
for (i = 0; i < 3; i++) {
output[decLen++] = a3[i];
}
i = 0;
}
}
if (i) {
for (j = i; j < 4; j++) {
a4[j] = '\0';
}
for (j = 0; j <4; j++) {
a4[j] = b64_lookup(a4[j]);
}
a4_to_a3(a3,a4);
for (j = 0; j < i - 1; j++) {
output[decLen++] = a3[j];
}
}
output[decLen] = '\0';
return decLen;
}
int base64_enc_len(int plainLen) {
int n = plainLen;
return (n + 2 - ((n + 2) % 3)) / 3 * 4;
}
int base64_dec_len(char * input, int inputLen) {
int i = 0;
int numEq = 0;
for(i = inputLen - 1; input[i] == '='; i--) {
numEq++;
}
return ((6 * inputLen) / 8) - numEq;
}
inline void a3_to_a4(unsigned char * a4, unsigned char * a3) {
a4[0] = (a3[0] & 0xfc) >> 2;
a4[1] = ((a3[0] & 0x03) << 4) + ((a3[1] & 0xf0) >> 4);
a4[2] = ((a3[1] & 0x0f) << 2) + ((a3[2] & 0xc0) >> 6);
a4[3] = (a3[2] & 0x3f);
}
inline void a4_to_a3(unsigned char * a3, unsigned char * a4) {
a3[0] = (a4[0] << 2) + ((a4[1] & 0x30) >> 4);
a3[1] = ((a4[1] & 0xf) << 4) + ((a4[2] & 0x3c) >> 2);
a3[2] = ((a4[2] & 0x3) << 6) + a4[3];
}
inline unsigned char b64_lookup(char c) {
if(c >='A' && c <='Z') return c - 'A';
if(c >='a' && c <='z') return c - 71;
if(c >='0' && c <='9') return c + 4;
if(c == '+') return 62;
if(c == '/') return 63;
return -1;
}
MK/module/laser/base64/base64.h 0 → 100644
View file @ 0399e36f
/**
* MK & MK4due 3D Printer Firmware
*
* Based on Marlin, Sprinter and grbl
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (C) 2013 - 2016 Alberto Cotronei @MagoKimbra
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Copyright (c) 2013 Adam Rudd.
* See LICENSE for more information
*/
#ifndef _BASE64_H
#define _BASE64_H
/* b64_alphabet:
* Description: Base64 alphabet table, a mapping between integers
* and base64 digits
* Notes: This is an extern here but is defined in Base64.c
*/
extern const char b64_alphabet[];
/* base64_encode:
* Description:
* Encode a string of characters as base64
* Parameters:
* output: the output buffer for the encoding, stores the encoded string
* input: the input buffer for the encoding, stores the binary to be encoded
* inputLen: the length of the input buffer, in bytes
* Return value:
* Returns the length of the encoded string
* Requirements:
* 1. output must not be null or empty
* 2. input must not be null
* 3. inputLen must be greater than or equal to 0
*/
int base64_encode(char *output, char *input, int inputLen);
/* base64_decode:
* Description:
* Decode a base64 encoded string into bytes
* Parameters:
* output: the output buffer for the decoding,
* stores the decoded binary
* input: the input buffer for the decoding,
* stores the base64 string to be decoded
* inputLen: the length of the input buffer, in bytes
* Return value:
* Returns the length of the decoded string
* Requirements:
* 1. output must not be null or empty
* 2. input must not be null
* 3. inputLen must be greater than or equal to 0
*/
int base64_decode(unsigned char *output, char *input, int inputLen);
/* base64_enc_len:
* Description:
* Returns the length of a base64 encoded string whose decoded
* form is inputLen bytes long
* Parameters:
* inputLen: the length of the decoded string
* Return value:
* The length of a base64 encoded string whose decoded form
* is inputLen bytes long
* Requirements:
* None
*/
int base64_enc_len(int inputLen);
/* base64_dec_len:
* Description:
* Returns the length of the decoded form of a
* base64 encoded string
* Parameters:
* input: the base64 encoded string to be measured
* inputLen: the length of the base64 encoded string
* Return value:
* Returns the length of the decoded form of a
* base64 encoded string
* Requirements:
* 1. input must not be null
* 2. input must be greater than or equal to zero
*/
int base64_dec_len(char *input, int inputLen);
#endif // _BASE64_H
MK/module/laser/laser.cpp 0 → 100644
View file @ 0399e36f
This diff is collapsed.
MK/module/laser/laser.h 0 → 100644
View file @ 0399e36f
/**
* MK & MK4due 3D Printer Firmware
*
* Based on Marlin, Sprinter and grbl
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (C) 2013 - 2016 Alberto Cotronei @MagoKimbra
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* laser.cpp - Laser control library for Arduino using 16 bit timers- Version 1
* Copyright (c) 2013 Timothy Schmidt. All right reserved.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 3 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef LASER_H
#define LASER_H
#include <inttypes.h>
// split into planned and status
typedef struct {
int fired; // method used to ask the laser to fire - LASER_FIRE_G1, LASER_FIRE_SPINDLE, LASER_FIRE_E, etc
float intensity; // Laser firing instensity 0.0 - 100.0
float ppm; // pulses per millimeter, for pulsed firing mode
unsigned long duration; // laser firing duration in microseconds, for pulsed firing mode
unsigned long dur; // instantaneous duration
bool status; // LASER_ON / LASER_OFF - buffered
bool firing; // LASER_ON / LASER_OFF - instantaneous
uint8_t mode; // CONTINUOUS, PULSED, RASTER
unsigned long last_firing; // microseconds since last laser firing
bool diagnostics; // Verbose debugging output over serial
unsigned int time; // temporary counter to limit eeprom writes
unsigned int lifetime; // laser lifetime firing counter in minutes
#if ENABLED(LASER_RASTER)
unsigned char raster_data[LASER_MAX_RASTER_LINE];
unsigned char rasterlaserpower;
float raster_aspect_ratio;
float raster_mm_per_pulse;
int raster_raw_length;
int raster_num_pixels;
bool raster_direction;
#endif // LASER_RASTER
} laser_t;
extern laser_t laser;
void laser_init();
void laser_fire(float intensity);
#if ENABLED(LASER_PULSE_METHOD)
void laser_pulse(uint32_t ulValue, unsigned long usec);
#endif
void laser_extinguish();
void laser_update_lifetime();
void laser_set_mode(int mode);
#if ENABLED(LASER_PERIPHERALS)
bool laser_peripherals_ok();
void laser_peripherals_on();
void laser_peripherals_off();
void laser_wait_for_peripherals();
#endif // LASER_PERIPHERALS
#ifdef HIGH_TO_FIRE // Some cutters fire on high, some on low.
#define LASER_ARM HIGH
#define LASER_UNARM LOW
#else
#define LASER_ARM LOW
#define LASER_UNARM HIGH
#endif
// Laser constants
#define LASER_OFF 0
#define LASER_ON 1
#define CONTINUOUS 0
#define PULSED 1
#define RASTER 2
#endif // LASER_H
MK/module/laser/laserbitmaps.h 0 → 100644
View file @ 0399e36f
/**
* MK & MK4due 3D Printer Firmware
*
* Based on Marlin, Sprinter and grbl
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (C) 2013 - 2016 Alberto Cotronei @MagoKimbra
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#define LASERENABLE_HEIGHT 20
#define LASERENABLE_WIDTH 25
#define LASERENABLE_BYTEWIDTH 4
const unsigned char laserenable_bmp[] PROGMEM = {
0x00, 0x1c, 0x00, 0x00,
0x00, 0x3e, 0x00, 0x00,
0x00, 0x77, 0x00, 0x00,
0x00, 0x63, 0x00, 0x00,
0x00, 0xc1, 0x80, 0x00,
0x01, 0xc1, 0xc0, 0x00,
0x01, 0x88, 0xc0, 0x00,
0x03, 0x08, 0x60, 0x00,
0x07, 0x41, 0x70, 0x00,
0x06, 0x2a, 0x30, 0x00,
0x0c, 0x1c, 0x18, 0x00,
0x1d, 0xbf, 0xfc, 0x00,
0x18, 0x1c, 0x0c, 0x00,
0x30, 0x2a, 0x06, 0x00,
0x70, 0x41, 0x07, 0x00,
0x60, 0x88, 0x83, 0x00,
0xc0, 0x08, 0x01, 0x80,
0xc0, 0x00, 0x01, 0x80,
0xff, 0xff, 0xff, 0x80,
0x7f, 0xff, 0xff, 0x00
};
#define ICON_HEIGHT 13
#define ICON_WIDTH 12
#define ICON_BYTEWIDTH 2
const unsigned char laseron_bmp[] PROGMEM = {
0xff, 0xf0,
0x8f, 0x10,
0x8f, 0x10,
0x9f, 0x90,
0x9f, 0x90,
0x80, 0x10,
0x86, 0x10,
0x86, 0x10,
0xc6, 0x30,
0xa6, 0x50,
0x96, 0x90,
0xaf, 0x50,
0xff, 0xf0
};
const unsigned char laseroff_bmp[] PROGMEM = {
0xff, 0xf0,
0x8f, 0x10,
0x8f, 0x10,
0x9f, 0x90,
0x9f, 0x90,
0x80, 0x10,
0x80, 0x10,
0x80, 0x10,
0x80, 0x10,
0x80, 0x10,
0x80, 0x10,
0x80, 0x10,
0xff, 0xf0
};
const unsigned char lockicon_bmp[] PROGMEM = {
0x0f, 0x00,
0x19, 0x80,
0x30, 0xc0,
0x20, 0x40,
0x20, 0x40,
0x20, 0x40,
0x3f, 0xc0,
0x20, 0x40,
0x26, 0x40,
0x26, 0x40,
0x2f, 0x40,
0x20, 0x40,
0x3f, 0xc0
};
const unsigned char vacicon_bmp[] PROGMEM = {
0x06, 0x00,
0x06, 0x00,
0x06, 0x00,
0x0f, 0x00,
0x0f, 0x00,
0x1f, 0x80,
0x3f, 0xc0,
0xff, 0xf0,
0xff, 0xf0,
0xc0, 0x30,
0x16, 0x80,
0x29, 0x40,
0x50, 0xa0
};
const unsigned char airicon_bmp[] PROGMEM = {
0x32, 0xc0,
0x30, 0xc0,
0x34, 0xc0,
0x30, 0xc0,
0x32, 0xc0,
0x30, 0xc0,
0x34, 0xc0,
0x19, 0x80,
0x02, 0x00,
0x00, 0x00,
0x04, 0x00,
0x09, 0x00,
0x22, 0x40
};
const unsigned char watericon_bmp[] PROGMEM = {
0x02, 0x00,
0x07, 0x00,
0x05, 0x00,
0x0d, 0x80,
0x08, 0x80,
0x18, 0xc0,
0x10, 0x40,
0x30, 0x60,
0x38, 0x20,
0x3c, 0x60,
0x3f, 0xe0,
0x1f, 0xc0,
0x0f, 0x80
};
MK/module/macros.h
View file @ 0399e36f
......@@ -21,61 +21,61 @@
*/
#ifndef MACROS_H
#define MACROS_H
#define MACROS_H
// Compiler warning on unused varable.
#define UNUSED(x) (void) (x)
// Compiler warning on unused varable.
#define UNUSED(x) (void) (x)
// Macros for bit masks
#ifndef _BV
// Macros for bit masks
#ifndef _BV
#define _BV(b) (1<<(b))
#endif
#define TEST(n,b) (((n)&_BV(b))!=0)
#define SBI(n,b) (n |= _BV(b))
#define CBI(n,b) (n &= ~_BV(b))
#define SET_BIT(n,b,value) (n) ^= ((-value)^(n)) & (_BV(b))
#endif
#define TEST(n,b) (((n)&_BV(b))!=0)
#define SBI(n,b) (n |= _BV(b))
#define CBI(n,b) (n &= ~_BV(b))
#define SET_BIT(n,b,value) (n) ^= ((-value)^(n)) & (_BV(b))
// Macros for maths shortcuts
#ifndef M_PI
// Macros for maths shortcuts
#ifndef M_PI
#define M_PI 3.1415926536
#endif
#define RADIANS(d) ((d)*M_PI/180.0)
#define DEGREES(r) ((r)*180.0/M_PI)
#define SIN_60 0.8660254037844386
#define COS_60 0.5
#endif
#define RADIANS(d) ((d)*M_PI/180.0)
#define DEGREES(r) ((r)*180.0/M_PI)
#define SIN_60 0.8660254037844386
#define COS_60 0.5
// Macros to support option testing
#define ENABLED defined
#define DISABLED !defined
// Macros to support option testing
#define ENABLED defined
#define DISABLED !defined
#define HAS(FE) (HAS_##FE)
#define HASNT(FE) (!(HAS_##FE))
#define HAS(FE) (HAS_##FE)
#define HASNT(FE) (!(HAS_##FE))
// Macros to contrain values
#define NUMERIC(a) ((a) >= '0' && '9' >= (a))
#define NUMERIC_SIGNED(a) (NUMERIC(a) || (a) == '-')
#define NOLESS(v,n) do{ if (v < n) v = n; }while(0)
#define NOMORE(v,n) do{ if (v > n) v = n; }while(0)
#define COUNT(a) (sizeof(a)/sizeof(*a))
// Macros to contrain values
#define NUMERIC(a) ((a) >= '0' && '9' >= (a))
#define NUMERIC_SIGNED(a) (NUMERIC(a) || (a) == '-')
#define NOLESS(v,n) do{ if (v < n) v = n; }while(0)
#define NOMORE(v,n) do{ if (v > n) v = n; }while(0)
#define COUNT(a) (sizeof(a)/sizeof(*a))
// Function macro
#define FORCE_INLINE __attribute__((always_inline)) inline
// Function macro
#define FORCE_INLINE __attribute__((always_inline)) inline
// Macro for debugging
#define DEBUGGING(F) (mk_debug_flags & (DEBUG_## F))
// Macro for debugging
#define DEBUGGING(F) (mk_debug_flags & (DEBUG_## F))
// Macro for String
#define STRINGIFY_(n) #n
#define STRINGIFY(n) STRINGIFY_(n)
// Macro for String
#define STRINGIFY_(n) #n
#define STRINGIFY(n) STRINGIFY_(n)
// Macro for varie
#define PIN_EXISTS(PN) (defined(PN##_PIN) && PN##_PIN >= 0)
// Macro for varie
#define PIN_EXISTS(PN) (defined(PN##_PIN) && PN##_PIN >= 0)
#define PENDING(NOW,SOON) ((long)(NOW-(SOON))<0)
#define ELAPSED(NOW,SOON) (!PENDING(NOW,SOON))
#define PENDING(NOW,SOON) ((long)(NOW-(SOON))<0)
#define ELAPSED(NOW,SOON) (!PENDING(NOW,SOON))
#define NOOP do{}while(0)
#define NOOP do{}while(0)
#define _AXIS(AXIS) AXIS ##_AXIS
#define _AXIS(AXIS) AXIS ##_AXIS
#endif //__MACROS_H
MK/module/mechanics.h
View file @ 0399e36f
......@@ -21,18 +21,18 @@
*/
#ifndef MECHANICS_H
#define MECHANICS_H
#define MECHANICS_H
// Macros for mechanics type
#define MECH_UNKNOWN -1
#define MECH_CARTESIAN 0
#define MECH_COREXY 1
#define MECH_COREYX 2
#define MECH_COREXZ 8
#define MECH_COREZX 9
#define MECH_DELTA 3
#define MECH_SCARA 4
// Macros for mechanics type
#define MECH_UNKNOWN -1
#define MECH_CARTESIAN 0
#define MECH_COREXY 1
#define MECH_COREYX 2
#define MECH_COREXZ 8
#define MECH_COREZX 9
#define MECH_DELTA 3
#define MECH_SCARA 4
#define MECH(mech) (MECHANISM == MECH_##mech)
#define MECH(mech) (MECHANISM == MECH_##mech)
#endif
\ No newline at end of file
MK/module/motion/endstops.cpp
View file @ 0399e36f
......@@ -162,6 +162,7 @@ void Endstops::report_state() {
card.closeFile();
quickStop();
disable_all_heaters(); // switch off all heaters.
disable_all_coolers();
}
#endif
}
......
MK/module/motion/planner.cpp
View file @ 0399e36f
......@@ -417,9 +417,7 @@ void check_axes_activity() {
unsigned char tail_valve_pressure = ValvePressure,
tail_e_to_p_pressure = EtoPPressure;
#endif
#if ENABLED(LASERBEAM)
unsigned char tail_laser_ttl_modulation = laser_ttl_modulation;
#endif
block_t* block;
if (blocks_queued()) {
......@@ -430,9 +428,6 @@ void check_axes_activity() {
tail_valve_pressure = block->valve_pressure;
tail_e_to_p_pressure = block->e_to_p_pressure;
#endif
#if ENABLED(LASERBEAM)
tail_laser_ttl_modulation = block_buffer[block_index].laser_ttlmodulation;
#endif
while (block_index != block_buffer_head) {
block = &block_buffer[block_index];
......@@ -493,10 +488,6 @@ void check_axes_activity() {
#endif
#endif
// add Laser TTL Modulation(PWM) Control
#if ENABLED(LASERBEAM)
analogWrite(LASER_TTL_PIN, tail_laser_ttl_modulation);
#endif
}
float junction_deviation = 0.1;
......@@ -629,8 +620,10 @@ float junction_deviation = 0.1;
block->steps[E_AXIS] /= 100;
block->step_event_count = max(block->steps[X_AXIS], max(block->steps[Y_AXIS], max(block->steps[Z_AXIS], block->steps[E_AXIS])));
#if DISABLED(LASERBEAM)
// Bail if this is a zero-length block
if (block->step_event_count <= DROP_SEGMENTS) return;
#endif
block->fan_speed = fanSpeed;
......@@ -645,11 +638,6 @@ float junction_deviation = 0.1;
block->mix_event_count[i] = block->steps[E_AXIS] * mixing_factor[i];
#endif
// Add update block variables for LASER BEAM control
#if ENABLED(LASERBEAM)
block->laser_ttlmodulation = laser_ttl_modulation;
#endif
// Compute direction bits for this block
uint8_t dirb = 0;
#if MECH(COREXY) || MECH(COREYX)
......@@ -879,6 +867,51 @@ float junction_deviation = 0.1;
#endif
);
}
#if ENABLED(LASERBEAM)
block->laser_intensity = laser.intensity;
block->laser_duration = laser.duration;
block->laser_status = laser.status;
block->laser_mode = laser.mode;
// When operating in PULSED or RASTER modes, laser pulsing must operate in sync with movement.
// Calculate steps between laser firings (steps_l) and consider that when determining largest
// interval between steps for X, Y, Z, E, L to feed to the motion control code.
if (laser.mode == RASTER || laser.mode == PULSED) {
#if ENABLED(LASER_PULSE_METHOD)
// Optimizing. Move calculations here rather than in stepper isr
static const float Factor = F_CPU/(LASER_PWM*2*100.0*255.0);
block->laser_raster_intensity_factor = laser.intensity * Factor;
#endif
block->steps_l = (unsigned long)labs(block->millimeters*laser.ppm);
if (laser.mode == RASTER) {
for (int i = 0; i < LASER_MAX_RASTER_LINE; i++) {
#if (!ENABLED(LASER_PULSE_METHOD))
float OldRange, NewRange, NewValue;
OldRange = (255.0 - 0.0);
NewRange = (laser.rasterlaserpower - LASER_REMAP_INTENSITY);
NewValue = (float)(((((float)laser.raster_data[i] - 0) * NewRange) / OldRange) + LASER_REMAP_INTENSITY);
//If less than 7%, turn off the laser tube.
if(NewValue == LASER_REMAP_INTENSITY)
NewValue = 0;
block->laser_raster_data[i] = NewValue;
#else
block->laser_raster_data[i] = laser.raster_data[i];
#endif
}
}
}
else
block->steps_l = 0;
block->step_event_count = max(block->steps[X_AXIS], max(block->steps[Y_AXIS], max(block->steps[Z_AXIS], max(block->steps[E_AXIS], block->steps_l))));
if (laser.diagnostics && block->laser_status == LASER_ON)
ECHO_LM(INFO, "Laser firing enabled");
#endif // LASERBEAM
float inverse_millimeters = 1.0 / block->millimeters; // Inverse millimeters to remove multiple divides
// Calculate speed in mm/second for each axis. No divide by zero due to previous checks.
......
MK/module/motion/planner.h
View file @ 0399e36f
......@@ -100,7 +100,16 @@ typedef struct {
#endif
#if ENABLED(LASERBEAM)
unsigned long laser_ttlmodulation;
uint8_t laser_mode; // CONTINUOUS, PULSED, RASTER
bool laser_status; // LASER_OFF, LASER_ON
float laser_ppm; // pulses per millimeter, for pulsed and raster firing modes
unsigned long laser_duration; // laser firing duration in microseconds, for pulsed and raster firing modes
unsigned long steps_l; // step count between firings of the laser, for pulsed firing mode
float laser_intensity; // Laser firing instensity in clock cycles for the PWM timer
#if ENABLED(LASER_RASTER)
unsigned char laser_raster_data[LASER_MAX_RASTER_LINE];
float laser_raster_intensity_factor;
#endif
#endif
volatile char busy;
......@@ -108,6 +117,8 @@ typedef struct {
#define BLOCK_MOD(n) ((n)&(BLOCK_BUFFER_SIZE-1))
#define MAX_EVENTS_COUNT 2147483648 // max for a signed 32 bit number
// Initialize the motion plan subsystem
void plan_init();
......
MK/module/motion/stepper.cpp
View file @ 0399e36f
......@@ -68,6 +68,13 @@ block_t* current_block; // A pointer to the block currently being traced
static unsigned char last_direction_bits = 0; // The next stepping-bits to be output
static unsigned int cleaning_buffer_counter = 0;
#if ENABLED(LASERBEAM)
static long counter_L;
#if ENABLED(LASER_RASTER)
static int counter_raster;
#endif // LASER_RASTER
#endif // LASERBEAM
#if ENABLED(Z_DUAL_ENDSTOPS)
static bool performing_homing = false,
locked_z_motor = false,
......@@ -114,7 +121,7 @@ static unsigned short OCR1A_nominal;
static bool check_endstops = true;
volatile long count_position[NUM_AXIS] = { 0 }; // Positions of stepper motors, in step units
volatile signed char count_direction[NUM_AXIS] = { 1 };
volatile signed char count_direction[NUM_AXIS] = { 1, 1, 1, 1 };
//===========================================================================
......@@ -419,6 +426,15 @@ ISR(TIMER1_COMPA_vect) {
return;
}
#if ENABLED(LASERBEAM) && (!ENABLED(LASER_PULSE_METHOD))
if (laser.dur != 0 && (laser.last_firing + laser.dur < micros())) {
if (laser.diagnostics)
ECHO_LM(INFO, "Laser firing duration elapsed, in interrupt handler");
laser_extinguish();
}
#endif
// If there is no current block, attempt to pop one from the buffer
if (!current_block) {
// Anything in the buffer?
......@@ -430,6 +446,13 @@ ISR(TIMER1_COMPA_vect) {
// Initialize Bresenham counters to 1/2 the ceiling
counter_X = counter_Y = counter_Z = counter_E = -(current_block->step_event_count >> 1);
#if ENABLED(LASERBEAM)
counter_L = counter_X;
#if !ENABLED(LASER_PULSE_METHOD)
laser.dur = current_block->laser_duration;
#endif
#endif
#if ENABLED(COLOR_MIXING_EXTRUDER)
for (uint8_t i = 0; i < DRIVER_EXTRUDERS; i++)
counter_m[i] = -(current_block->step_event_count >> 1);
......@@ -445,6 +468,10 @@ ISR(TIMER1_COMPA_vect) {
}
#endif
#if ENABLED(LASERBEAM) && ENABLED(LASER_RASTER)
if (current_block->laser_mode == RASTER) counter_raster = 0;
#endif
// #if ENABLED(ADVANCE)
// e_steps[current_block->active_driver] = 0;
// #endif
......@@ -463,6 +490,19 @@ ISR(TIMER1_COMPA_vect) {
if (endstops.enabled) endstops.update();
#endif
// Continuous firing of the laser during a move happens here, PPM and raster happen further down
#if ENABLED(LASERBEAM)
if (current_block->laser_mode == CONTINUOUS && current_block->laser_status == LASER_ON)
laser_fire(current_block->laser_intensity);
#if !ENABLED(LASER_PULSE_METHOD)
if (current_block->laser_status == LASER_OFF) {
if (laser.diagnostics) ECHO_LM(INFO,"Laser status set to off, in interrupt handler");
laser_extinguish();
}
#endif
#endif
// Take multiple steps per interrupt (For high speed moves)
for (uint8_t i = 0; i < step_loops; i++) {
......@@ -557,6 +597,66 @@ ISR(TIMER1_COMPA_vect) {
#endif
#endif
#if ENABLED(LASERBEAM)
counter_L += current_block->steps_l;
if (counter_L > 0) {
if (current_block->laser_mode == PULSED && current_block->laser_status == LASER_ON) { // Pulsed Firing Mode
#if ENABLED(LASER_PULSE_METHOD)
uint32_t ulValue = current_block->laser_raster_intensity_factor * 255;
laser_pulse(ulValue, current_block->laser_duration);
laser.time += current_block->laser_duration / 1000;
#else
laser_fire(current_block->laser_intensity);
#endif
if (laser.diagnostics) {
ECHO_MV("X: ", counter_X);
ECHO_MV("Y: ", counter_Y);
ECHO_MV("L: ", counter_L);
}
}
#if ENABLED(LASER_RASTER)
if (current_block->laser_mode == RASTER && current_block->laser_status == LASER_ON) { // Raster Firing Mode
#if ENABLED(LASER_PULSE_METHOD)
uint32_t ulValue = current_block->laser_raster_intensity_factor *
current_block->laser_raster_data[counter_raster];
laser_pulse(ulValue, current_block->laser_duration);
counter_raster++;
laser.time += current_block->laser_duration/1000;
#else
// For some reason, when comparing raster power to ppm line burns the rasters were around 2% more powerful
// going from darkened paper to burning through paper.
laser_fire(current_block->laser_raster_data[counter_raster]);
#endif
if (laser.diagnostics) ECHO_EMV("Pixel: ", (float)current_block->laser_raster_data[counter_raster]);
counter_raster++;
}
#endif // LASER_RASTER
counter_L -= current_block->step_event_count;
}
#if !ENABLED(LASER_PULSE_METHOD)
if (current_block->laser_duration != 0 && (laser.last_firing + current_block->laser_duration < micros())) {
if (laser.diagnostics) {
ECHO_MV("X: ", counter_X);
ECHO_MV(", Y: ", counter_Y);
ECHO_MV(", L: ", counter_L);
ECHO_MV(", Z: ", counter_L);
ECHO_MV(", E: ", counter_E);
ECHO_MV(", steps done: ",step_events_completed);
ECHO_MV(", event count: ", current_block->step_event_count);
ECHO_EM(", <--------------------");
ECHO_LM(INFO, "Laser firing duration elapsed, in interrupt fast loop ");
}
laser_extinguish();
}
#endif
#endif // LASERBEAM
// safe check for erroneous calculated events count
if(current_block->step_event_count >= MAX_EVENTS_COUNT) {
kill_current_block();
break;
}
step_events_completed++;
if (step_events_completed >= current_block->step_event_count) break;
}
......@@ -664,6 +764,10 @@ ISR(TIMER1_COMPA_vect) {
if (step_events_completed >= current_block->step_event_count) {
current_block = NULL;
plan_discard_current_block();
#if ENABLED(LASERBEAM) && ENABLED(LASER_PULSE_METHOD)
if (current_block->laser_mode == CONTINUOUS && current_block->laser_status == LASER_ON)
laser_extinguish();
#endif
}
}
}
......
MK/module/nextion/NexHardware.cpp
View file @ 0399e36f
......@@ -65,7 +65,7 @@ bool recvRetNumber(uint32_t *number, uint32_t timeout)
&& temp[7] == 0xFF
)
{
*number = (temp[4] << 24) | (temp[3] << 16) | (temp[2] << 8) | (temp[1]);
*number = ((uint32_t)temp[4] << 24) | ((uint32_t)temp[3] << 16) | ((uint32_t)temp[2] << 8) | ((uint32_t)temp[1]);
ret = true;
}
......
MK/module/pins.h
View file @ 0399e36f
......@@ -344,6 +344,26 @@
#define _E5_PINS
#endif
#ifndef TEMP_COOLER_PIN
#define TEMP_COOLER_PIN -1
#endif
#ifndef COOLER_PIN
#define COOLER_PIN -1
#endif
#ifndef LASER_PWR_PIN
#define LASER_PWR_PIN -1
#endif
#ifndef LASER_TTL_PIN
#define LASER_TTL_PIN -1
#endif
#ifndef FLOWMETER_PIN
#define FLOWMETER_PIN -1
#endif
#define SENSITIVE_PINS { 0, 1, \
X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, \
Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, \
......@@ -351,7 +371,10 @@
PS_ON_PIN, HEATER_BED_PIN, FAN_PIN, \
_H0_PINS _H1_PINS _H2_PINS _H3_PINS \
_E0_PINS _E1_PINS _E2_PINS _E3_PINS _E4_PINS _E5_PINS \
analogInputToDigitalPin(TEMP_BED_PIN) \
analogInputToDigitalPin(TEMP_BED_PIN), \
analogInputToDigitalPin(TEMP_COOLER_PIN), \
COOLER_PIN, LASER_PWR_PIN, LASER_TTL_PIN, \
FLOWMETER_PIN \
}
#endif //__PINS_H
MK/module/sanitycheck.h
View file @ 0399e36f
......@@ -82,12 +82,18 @@
#if DISABLED(TEMP_SENSOR_BED)
#error DEPENDENCY ERROR: Missing setting TEMP_SENSOR_BED
#endif
#if (THERMISTORHEATER_0 == 998) || (THERMISTORHEATER_1 == 998) || (THERMISTORHEATER_2 == 998) || (THERMISTORHEATER_3 == 998) || (THERMISTORBED == 998) //User EXIST table
#if DISABLED(TEMP_SENSOR_CHAMBER)
#error DEPENDENCY_ERROR: Missing setting TEMP_SENSOR_CHAMBER
#endif
#if DISABLED(TEMP_SENSOR_COOLER)
#error DEPENDENCY_ERROR: Missing setting TEMP_SENSOR_COOLER
#endif
#if (THERMISTORHEATER_0 == 998) || (THERMISTORHEATER_1 == 998) || (THERMISTORHEATER_2 == 998) || (THERMISTORHEATER_3 == 998) || (THERMISTORBED == 998) || (THERMISTORCHAMBER == 998) || (THERMISTORCOOLER == 998) // User EXIST table
#if DISABLED(DUMMY_THERMISTOR_998_VALUE)
#define DUMMY_THERMISTOR_998_VALUE 25
#endif
#endif
#if (THERMISTORHEATER_0 == 999) || (THERMISTORHEATER_1 == 999) || (THERMISTORHEATER_2 == 999) || (THERMISTORHEATER_3 == 999) || (THERMISTORBED == 999) //User EXIST table
#if (THERMISTORHEATER_0 == 999) || (THERMISTORHEATER_1 == 999) || (THERMISTORHEATER_2 == 999) || (THERMISTORHEATER_3 == 999) || (THERMISTORBED == 999) || (THERMISTORCHAMBER == 999) || (THERMISTORCOOLER == 999)// User EXIST table
#if DISABLED(DUMMY_THERMISTOR_999_VALUE)
#define DUMMY_THERMISTOR_999_VALUE 25
#endif
......@@ -145,6 +151,28 @@
#error DEPENDENCY ERROR: Missing setting BED_MINTEMP
#endif
#endif
#if TEMP_SENSOR_CHAMBER != 0
#if DISABLED(CHAMBER_MAXTEMP)
#error DEPENDENCY ERROR: Missing setting CHAMBER_MAXTEMP
#endif
#if DISABLED(CHAMBER_MINTEMP)
#error DEPENDENCY ERROR: Missing setting CHAMBER_MINTEMP
#endif
#if HASNT(HEATER_CHAMBER)
#error DEPENDENCY ERROR: Cannot enable TEMP_SENSOR_CHAMBER and not HEATER_CHAMBER_PIN
#endif
#endif
#if TEMP_SENSOR_COOLER != 0
#if DISABLED(COOLER_MAXTEMP)
#error DEPENDENCY ERROR: Missing setting COOLER_MAXTEMP
#endif
#if DISABLED(COOLER_MINTEMP)
#error DEPENDENCY ERROR: Missing setting COOLER_MINTEMP
#endif
#if HASNT(COOLER)
#error DEPENDENCY ERROR: Cannot enable TEMP_SENSOR_COOLER and not COOLER_PIN
#endif
#endif
#if DISABLED(PLA_PREHEAT_HOTEND_TEMP)
#error DEPENDENCY ERROR: Missing setting PLA_PREHEAT_HOTEND_TEMP
#endif
......@@ -187,7 +215,13 @@
#if DISABLED(MAX_BED_POWER)
#error DEPENDENCY ERROR: Missing setting MAX_BED_POWER
#endif
#if ENABLED(PIDTEMP) || ENABLED(PIDTEMPBED)
#if DISABLED(MAX_CHAMBER_POWER)
#error DEPENDENCY ERROR: Missing setting MAX_CHAMBER_POWER
#endif
#if DISABLED(MAX_COOLER_POWER)
#error DEPENDENCY ERROR: Missing setting MAX_COOLER_POWER
#endif
#if ENABLED(PIDTEMP) || ENABLED(PIDTEMPBED) || ENABLED(PIDTEMPCHAMBER) || ENABLED(PIDTEMPCOOLER)
#if DISABLED(MAX_OVERSHOOT_PID_AUTOTUNE)
#error DEPENDENCY ERROR: Missing setting MAX_OVERSHOOT_PID_AUTOTUNE
#endif
......@@ -223,6 +257,35 @@
#error DEPENDENCY ERROR: Missing setting DEFAULT_bedKd
#endif
#endif
#if ENABLED(PIDTEMPCHAMBER)
#if DISABLED(PID_CHAMBER_INTEGRAL_DRIVE_MAX)
#error DEPENDENCY ERROR: Missing setting PID_CHAMBER_INTEGRAL_DRIVE_MAX
#endif
#if DISABLED(DEFAULT_chamberKp)
#error DEPENDENCY ERROR: Missing setting DEFAULT_chamberKp
#endif
#if DISABLED(DEFAULT_chamberKi)
#error DEPENDENCY ERROR: Missing setting DEFAULT_chamberKi
#endif
#if DISABLED(DEFAULT_chamberKd)
#error DEPENDENCY ERROR: Missing setting DEFAULT_chamberKd
#endif
#endif
#if ENABLED(PIDTEMPCOOLER)
#if DISABLED(PID_COOLER_INTEGRAL_DRIVE_MAX)
#error DEPENDENCY ERROR: Missing setting PID_COOLER_INTEGRAL_DRIVE_MAX
#endif
#if DISABLED(DEFAULT_coolerKp)
#error DEPENDENCY ERROR: Missing setting DEFAULT_coolerKp
#endif
#if DISABLED(DEFAULT_coolerKi)
#error DEPENDENCY ERROR: Missing setting DEFAULT_coolerKi
#endif
#if DISABLED(DEFAULT_coolerKd)
#error DEPENDENCY ERROR: Missing setting DEFAULT_coolerKd
#endif
#endif
#if ENABLED(BED_LIMIT_SWITCHING)
#if DISABLED(BED_HYSTERESIS)
#error DEPENDENCY ERROR: Missing setting BED_HYSTERESIS
......@@ -231,6 +294,22 @@
#error DEPENDENCY ERROR: Missing setting BED_CHECK_INTERVAL
#endif
#endif
#if ENABLED(CHAMBER_LIMIT_SWITCHING)
#if DISABLED(CHAMBER_HYSTERESIS)
#error DEPENDENCY ERROR: Missing setting CHAMBER_HYSTERESIS
#endif
#if DISABLED(CHAMBER_CHECK_INTERVAL)
#error DEPENDENCY ERROR: Missing setting CHAMBER_CHECK_INTERVAL
#endif
#endif
#if ENABLED(COOLER_LIMIT_SWITCHING)
#if DISABLED(COOLER_HYSTERESIS)
#error DEPENDENCY ERROR: Missing setting COOLER_HYSTERESIS
#endif
#if DISABLED(COOLER_CHECK_INTERVAL)
#error DEPENDENCY ERROR: Missing setting COOLER_CHECK_INTERVAL
#endif
#endif
#if ENABLED(THERMAL_PROTECTION_HOTENDS)
#if DISABLED(THERMAL_PROTECTION_PERIOD)
#error DEPENDENCY ERROR: Missing setting THERMAL_PROTECTION_PERIOD
......@@ -253,6 +332,23 @@
#error DEPENDENCY ERROR: Missing setting THERMAL_PROTECTION_BED_HYSTERESIS
#endif
#endif
#if ENABLED(THERMAL_PROTECTION_COOLER)
#if DISANLED(THERMAL_PROTECTION_COOLER_PERIOD)
#error DEPENDENCY ERROR: Missing setting THERMAL_PROTECTION_COOLER_PERIOD
#endif
#if DISABLED(THERMAL_PROTECTION_COOLER_HYSTERESIS)
#error DEPENDENCY ERROR: Missing setting THERMAL_PROTECTION_COOLER_HYSTERESIS
#endif
#if ENABLED(THERMAL_PROTECTION_COOLER_WATCHDOG)
#if DISABLED(WATCH_TEMP_COOLER_PERIOD)
#error DEPENDENCY ERROR: Missing setting WATCH_TEMP_COOLER_PERIOD
#endif
#if DISABLED(WATCH_TEMP_COOLER_DECREASE)
#error DEPENDENCY ERROR: Missing setting WATCH_TEMP_COOLER_DECREASE
#endif
#endif
#endif
// Fan
#if DISABLED(SOFT_PWM_SCALE)
......@@ -1762,8 +1858,26 @@
#error DEPENDENCY ERROR: You must set EXTRUDERS = 2 for DONDOLO
#endif
#if ENABLED(LASERBEAM) && (!PIN_EXISTS(LASER_PWR) || !PIN_EXISTS(LASER_TTL))
#error DEPENDENCY ERROR: You have to set LASER_PWR_PIN and LASER_TTL_PIN to a valid pin if you enable LASERBEAM
#if ENABLED(LASERBEAM)
#if (!ENABLED(LASER_REMAP_INTENSITY) && ENABLED(LASER_RASTER))
#error DEPENDENCY ERROR: You have to set LASER_REMAP_INTENSITY with LASER_RASTER enabled
#endif
#if (!ENABLED(LASER_CONTROL) || ((LASER_CONTROL != 1) && (LASER_CONTROL != 2)))
#error DEPENDENCY ERROR: You have to set LASER_CONTROL to 1 or 2
#else
#if(LASER_CONTROL == 1)
#if( !PIN_EXISTS(LASER_PWR))
#error DEPENDENCY ERROR: You have to set LASER_PWR_PIN
#endif
#else
#if( !PIN_EXISTS(LASER_PWR) || !PIN_EXISTS(LASER_TTL))
#error DEPENDENCY ERROR: You have to set LASER_PWR_PIN and LASER_TTL_PIN to a valid pin if you enable LASER
#endif
#endif
#endif
#if DISABLED(LASER_HAS_FOCUS)
#error DEPENDENCY ERROR: Missing LASER_HAS_FOCUS setting
#endif
#endif
#if ENABLED(FILAMENT_RUNOUT_SENSOR) && !PIN_EXISTS(FILRUNOUT)
......@@ -1774,6 +1888,10 @@
#error DEPENDENCY ERROR: You have to set FILWIDTH_PIN to a valid pin if you enable FILAMENT_SENSOR
#endif
#if ENABLED(FILAMENT_SENSOR) && !PIN_EXISTS(FLOWMETER)
#error DEPENDENCY ERROR: You have to set FLOWMETER_PIN to a valid pin if you enable FLOWMETER_SENSOR
#endif
#if ENABLED(POWER_CONSUMPTION) && !PIN_EXISTS(POWER_CONSUMPTION)
#error DEPENDENCY ERROR: You have to set POWER_CONSUMPTION_PIN to a valid pin if you enable POWER_CONSUMPTION
#endif
......
MK/module/sensor/flowmeter.cpp 0 → 100644
View file @ 0399e36f
/**
* MK & MK4due 3D Printer Firmware
*
* Based on Marlin, Sprinter and grbl
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (C) 2013 - 2016 Alberto Cotronei @MagoKimbra
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* flowmeter.h - Flowmeter control library for Arduino - Version 1
* Copyright (c) 2016 Franco (nextime) Lanza. All right reserved.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 3 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "../../base.h"
#include <Arduino.h>
#if ENABLED(FLOWMETER_SENSOR)
volatile int flowrate_pulsecount;
float flowrate;
static millis_t flowmeter_timer = 0;
static millis_t lastflow = 0;
void flowrate_pulsecounter();
void flow_init() {
flowrate = 0;
flowrate_pulsecount = 0;
pinMode(FLOWMETER_PIN, INPUT);
attachInterrupt(digitalPinToInterrupt(FLOWMETER_PIN), flowrate_pulsecounter, FALLING);
}
void flowrate_manage() {
millis_t now;
now = millis();
if(ELAPSED(now, flowmeter_timer)) {
detachInterrupt(digitalPinToInterrupt(FLOWMETER_PIN));
flowrate = (float)(((1000.0 / (float)((float)now - (float)lastflow)) * (float)flowrate_pulsecount) / (float)FLOWMETER_CALIBRATION);
#if ENABLED(FLOWMETER_DEBUG)
ECHO_M(" FLOWMETER DEBUG ");
ECHO_MV(" flowrate:", flowrate);
ECHO_MV(" flowrate_pulsecount:", flowrate_pulsecount);
ECHO_EMV(" CALIBRATION:", FLOWMETER_CALIBRATION);
#endif
flowmeter_timer = now + 1000UL;
lastflow = now;
flowrate_pulsecount = 0;
attachInterrupt(digitalPinToInterrupt(FLOWMETER_PIN), flowrate_pulsecounter, FALLING);
}
}
float get_flowrate() {
return flowrate;
}
void flowrate_pulsecounter() {
// Increment the pulse counter
flowrate_pulsecount++;
}
#endif // FLOWMETER_SENSOR
MK/module/sensor/flowmeter.h 0 → 100644
View file @ 0399e36f
/**
* MK & MK4due 3D Printer Firmware
*
* Based on Marlin, Sprinter and grbl
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (C) 2013 - 2016 Alberto Cotronei @MagoKimbra
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* flowmeter.h - Flowmeter control library for Arduino - Version 1
* Copyright (c) 2016 Franco (nextime) Lanza. All right reserved.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 3 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef FLOWMETER_H
#define FLOWMETER_H
#define FLOWMETER_CALIBRATION (FLOWMETER_MAXFREQ / FLOWMETER_MAXFLOW)
#if ENABLED(FLOWMETER_SENSOR)
void flowrate_manage();
void flow_init();
float get_flowrate();
#endif
#endif // FLOWMETER_H
MK/module/temperature/temperature.cpp
View file @ 0399e36f
This diff is collapsed.
MK/module/temperature/temperature.h
View file @ 0399e36f
......@@ -45,7 +45,7 @@
// public functions
void tp_init(); //initialize the heating
void manage_heater(); //it is critical that this is called periodically.
void manage_temp_controller(); //it is critical that this is called periodically.
#if ENABLED(FILAMENT_SENSOR)
// For converting raw Filament Width to milimeters
......@@ -69,12 +69,20 @@ void manage_heater(); //it is critical that this is called periodically.
// do not use these routines and variables outside of temperature.cpp
extern int target_temperature[4];
extern float current_temperature[4];
extern int target_temperature_bed;
extern float current_temperature_bed;
extern int target_temperature_chamber;
extern float current_temperature_chamber;
extern int target_temperature_cooler;
extern float current_temperature_cooler;
#if ENABLED(SHOW_TEMP_ADC_VALUES)
extern int current_temperature_raw[4];
extern int current_temperature_bed_raw;
extern int current_temperature_chamber_raw;
extern int current_temperature_cooler_raw;
#endif
extern int target_temperature_bed;
extern float current_temperature_bed;
#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
extern float redundant_temperature;
#endif
......@@ -92,7 +100,15 @@ extern float current_temperature_bed;
extern float bedKp, bedKi, bedKd;
#endif
#if ENABLED(PIDTEMP) || ENABLED(PIDTEMPBED)
#if ENABLED(PIDTEMPCHAMBER)
extern float chamberKp, chamberKi, chamberKd;
#endif
#if ENABLED(PIDTEMPCOOLER)
extern float coolerKp, coolerKi, coolerKd;
#endif
#if ENABLED(PIDTEMP) || ENABLED(PIDTEMPBED) || ENABLED(PIDTEMPCHAMBER) || ENABLED(PIDTEMPCOOLER)
float scalePID_i(float i);
float scalePID_d(float d);
float unscalePID_i(float i);
......@@ -114,14 +130,20 @@ extern float current_temperature_bed;
FORCE_INLINE float degHotend(uint8_t hotend) { return current_temperature[HOTEND_ARG]; }
FORCE_INLINE float degBed() { return current_temperature_bed; }
FORCE_INLINE float degChamber() { return current_temperature_chamber; }
FORCE_INLINE float degCooler() { return current_temperature_cooler; }
#if ENABLED(SHOW_TEMP_ADC_VALUES)
FORCE_INLINE float rawHotendTemp(uint8_t hotend) { return current_temperature_raw[HOTEND_ARG]; }
FORCE_INLINE float rawBedTemp() { return current_temperature_bed_raw; }
FORCE_INLINE float rawChamberTemp() { return current_temperature_chamber_raw; }
FORCE_INLINE float rawCoolerTemp() { return current_temperature_cooler_raw; }
#endif
FORCE_INLINE float degTargetHotend(uint8_t hotend) { return target_temperature[HOTEND_ARG]; }
FORCE_INLINE float degTargetBed() { return target_temperature_bed; }
FORCE_INLINE float degTargetChamber() { return target_temperature_chamber; }
FORCE_INLINE float degTargetCooler() { return target_temperature_cooler; }
#if ENABLED(THERMAL_PROTECTION_HOTENDS)
void start_watching_heater(int h = 0);
......@@ -131,6 +153,14 @@ FORCE_INLINE float degTargetBed() { return target_temperature_bed; }
void start_watching_bed();
#endif
#if ENABLED(THERMAL_PROTECTION_CHAMBER)
void start_watching_chamber();
#endif
#if ENABLED(THERMAL_PROTECTION_COOLER)
void start_watching_cooler();
#endif
FORCE_INLINE void setTargetHotend(const float& celsius, uint8_t hotend) {
target_temperature[HOTEND_ARG] = celsius;
#if ENABLED(THERMAL_PROTECTION_HOTENDS)
......@@ -145,11 +175,29 @@ FORCE_INLINE void setTargetBed(const float& celsius) {
#endif
}
FORCE_INLINE void setTargetChamber(const float& celsius) {
target_temperature_chamber = celsius;
#if ENABLED(THERMAL_PROTECTION_CHAMBER)
start_watching_chamber();
#endif
}
FORCE_INLINE void setTargetCooler(const float& celsius) {
target_temperature_cooler = celsius;
#if ENABLED(THERMAL_PROTECTION_COOLER)
start_watching_cooler();
#endif
}
FORCE_INLINE bool isHeatingHotend(uint8_t hotend) { return target_temperature[HOTEND_ARG] > current_temperature[HOTEND_ARG]; }
FORCE_INLINE bool isHeatingBed() { return target_temperature_bed > current_temperature_bed; }
FORCE_INLINE bool isHeatingChamber() { return target_temperature_chamber > current_temperature_chamber; }
FORCE_INLINE bool isHeatingCooler() { return target_temperature_cooler > current_temperature_cooler; }
FORCE_INLINE bool isCoolingHotend(uint8_t hotend) { return target_temperature[HOTEND_ARG] < current_temperature[HOTEND_ARG]; }
FORCE_INLINE bool isCoolingBed() { return target_temperature_bed < current_temperature_bed; }
FORCE_INLINE bool isCoolingChamber() { return target_temperature_chamber < current_temperature_chamber; }
FORCE_INLINE bool isCoolingCooler() { return target_temperature_cooler < current_temperature_cooler; }
#define HOTEND_ROUTINES(NR) \
FORCE_INLINE float degHotend##NR() { return degHotend(NR); } \
......@@ -175,11 +223,17 @@ HOTEND_ROUTINES(0);
#endif
int getHeaterPower(int heater);
int getBedPower();
int getChamberPower();
int getCoolerPower();
unsigned char getPwmCooler(bool soft);
void disable_all_heaters();
void disable_all_coolers();
void updatePID();
#if HAS(PID_HEATING)
void PID_autotune(float temp, int hotend, int ncycles, bool set_result = false);
#if HAS(PID_HEATING) || HAS(PID_COOLING)
void PID_autotune(float temp, int temp_controller, int ncycles, bool set_result = false);
#endif
void setExtruderAutoFanState(int pin, bool state);
......
MK/module/temperature/thermistortables.h
View file @ 0399e36f
This diff is collapsed.
README.md
View file @ 0399e36f
......@@ -46,6 +46,8 @@ Added total filament printed writed in SD CARD.
Added anti extruder idle oozing system.
Added Hysteresis and Z-Wobble correction (only cartesian printers).
Added support reader TAG width MFRC522
Added Cooler and Hot Chamber
Added Laser beam, raset
## Credits
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment