Skip to content

M
MarlinKimbra
Commit 002525cb authored by Franco (nextime) Lanza's avatar Franco (nextime) Lanza
Browse files
Options

Update GCodes documentation

parent 8b6d0865
Hide whitespace changes
Inline Side-by-side
Showing with 7 additions and 2 deletions
Documentation/GCodes.md
View file @ 002525cb
...@@ -2,11 +2,13 @@ ...@@ -2,11 +2,13 @@
## G Codes ## G Codes
* G0 -> G1 * G0 -> G1 except for laser where G0 is "move without firing"
* G1 - Coordinated Movement X Y Z E F(feedrate) P(Purge) * G1 - Coordinated Movement X Y Z E F(feedrate) P(Purge), for laser move by firing
* G2 - CW ARC * G2 - CW ARC
* G3 - CCW ARC * G3 - CCW ARC
* G4 - Dwell S[seconds] or P[milliseconds], delay in Second or Millisecond * G4 - Dwell S[seconds] or P[milliseconds], delay in Second or Millisecond
* G5 - Bezier curve - from http://forums.reprap.org/read.php?147,93577
* G7 - execute raster (base64) line (LASER)
* G10 - retract filament according to settings of M207 * G10 - retract filament according to settings of M207
* G11 - retract recover filament according to settings of M208 * G11 - retract recover filament according to settings of M208
* G28 - X0 Y0 Z0 Home all Axis. G28 M for bed manual setting with LCD. * G28 - X0 Y0 Z0 Home all Axis. G28 M for bed manual setting with LCD.
...@@ -124,6 +126,9 @@ ...@@ -124,6 +126,9 @@
* M595 - Set hotend AD595 offset and gain * M595 - Set hotend AD595 offset and gain
* M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal] * M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]
* M605 - Set dual x-carriage movement mode: Smode [ X<duplication x-offset> Rduplication temp offset ] * M605 - Set dual x-carriage movement mode: Smode [ X<duplication x-offset> Rduplication temp offset ]
* M649 - laser set options
* M650 - mUVe peel set peel distance
* M651 - mUVe peel run peel move
* M666 - Set z probe offset or Endstop and delta geometry adjustment. M666 L for list command * M666 - Set z probe offset or Endstop and delta geometry adjustment. M666 L for list command
* M906 - Set motor currents XYZ T0-4 E * M906 - Set motor currents XYZ T0-4 E
* M907 - Set digital trimpot motor current using axis codes. * M907 - Set digital trimpot motor current using axis codes.
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment