70.h 2.48 KB
/****************************************************************************************
* 70
* MegaTronics
****************************************************************************************/

#define KNOWN_BOARD 1

#ifndef __AVR_ATmega2560__
  #error Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
#endif

#define LARGE_FLASH        true

#define ORIG_X_STEP_PIN         26
#define ORIG_X_DIR_PIN          28
#define ORIG_X_ENABLE_PIN       24
#define ORIG_X_MIN_PIN          41
#define ORIG_X_MAX_PIN          37

#define ORIG_Y_STEP_PIN         60 // A6
#define ORIG_Y_DIR_PIN          61 // A7
#define ORIG_Y_ENABLE_PIN       22
#define ORIG_Y_MIN_PIN          14
#define ORIG_Y_MAX_PIN          15

#define ORIG_Z_STEP_PIN         54 // A0
#define ORIG_Z_DIR_PIN          55 // A1
#define ORIG_Z_ENABLE_PIN       56 // A2
#define ORIG_Z_MIN_PIN          18
#define ORIG_Z_MAX_PIN          19

#define ORIG_E0_STEP_PIN        31
#define ORIG_E0_DIR_PIN         32
#define ORIG_E0_ENABLE_PIN      38

#define ORIG_E1_STEP_PIN        34
#define ORIG_E1_DIR_PIN         36
#define ORIG_E1_ENABLE_PIN      30

#define SDPOWER                 -1
#define SDSS                    53
#define LED_PIN                 13


#define ORIG_FAN_PIN             7 // IO pin. Buffer needed
#define ORIG_PS_ON_PIN          12
#define KILL_PIN                -1

#define ORIG_HEATER_0_PIN        9    // EXTRUDER 1
#define ORIG_HEATER_1_PIN        8    // EXTRUDER 2 (FAN On Sprinter)
#define ORIG_HEATER_2_PIN       -1

#if TEMP_SENSOR_0 == -1
#define ORIG_TEMP_0_PIN          8   // ANALOG NUMBERING
#else
#define ORIG_TEMP_0_PIN         13   // ANALOG NUMBERING

#endif

#define ORIG_TEMP_1_PIN         15   // ANALOG NUMBERING
#define ORIG_TEMP_2_PIN         -1   // ANALOG NUMBERING
#define ORIG_HEATER_BED_PIN     10   // BED
#define ORIG_TEMP_BED_PIN       14   // ANALOG NUMBERING

#define ORIG_BEEPER_PIN         33   // Beeper on AUX-4

#if ENABLED(ULTRA_LCD)
  #if ENABLED(NEWPANEL)
  //arduino pin which triggers an piezzo beeper

    #define LCD_PINS_RS 16
    #define LCD_PINS_ENABLE 17
    #define LCD_PINS_D4 23
    #define LCD_PINS_D5 25
    #define LCD_PINS_D6 27
    #define LCD_PINS_D7 29

    //buttons are directly attached using AUX-2
    #define BTN_EN1 59
    #define BTN_EN2 64
    #define BTN_ENC 43  //the click

    #define BLEN_C 2
    #define BLEN_B 1
    #define BLEN_A 0

    #define SD_DETECT_PIN -1   // Ramps does not use this port
  #endif //NEWPANEL

#endif //ULTRA_LCD