I give up supporting old autoconf/automake; now require at least 2.52

acinclude.m4

@@ -512,266 +512,4 @@ dnl discussed.  The probability that the "fast" types may be removed before
 dnl the standard is finalized is high enough that they are not currently
 dnl implemented.
 
-# AM_INIT_AUTOMAKE(PACKAGE,VERSION, [NO-DEFINE])
-# ----------------------------------------------
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_REQUIRE([AC_PROG_INSTALL])dnl
-# test to see if srcdir already configured
-if test "`CDPATH=:; cd $srcdir && pwd`" != "`pwd`" &&
-   test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run \"make distclean\" there first])
-fi
-
-# Define the identity of the package.
-PACKAGE=$1
-AC_SUBST(PACKAGE)dnl
-VERSION=$2
-AC_SUBST(VERSION)dnl
-ifelse([$3],,
-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])
-
-# Autoconf 2.50 wants to disallow AM_ names.  We explicitly allow
-# the ones we care about.
-ifdef([m4_pattern_allow],
-      [m4_pattern_allow([^AM_[A-Z]+FLAGS])])dnl
-
-# Autoconf 2.50 always computes EXEEXT.  However we need to be
-# compatible with 2.13, for now.  So we always define EXEEXT, but we
-# don't compute it.
-AC_SUBST(EXEEXT)
-# Similar for OBJEXT -- only we only use OBJEXT if the user actually
-# requests that it be used.  This is a bit dumb.
-: ${OBJEXT=o}
-AC_SUBST(OBJEXT)
-
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG(ACLOCAL, aclocal)
-AM_MISSING_PROG(AUTOCONF, autoconf)
-AM_MISSING_PROG(AUTOMAKE, automake)
-AM_MISSING_PROG(AUTOHEADER, autoheader)
-AM_MISSING_PROG(MAKEINFO, makeinfo)
-AM_MISSING_PROG(AMTAR, tar)
-AM_PROG_INSTALL_SH
-AM_PROG_INSTALL_STRIP
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_PROVIDE_IFELSE([AC_PROG_][CC],
-                  [_AM_DEPENDENCIES(CC)],
-                  [define([AC_PROG_][CC],
-                          defn([AC_PROG_][CC])[_AM_DEPENDENCIES(CC)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_][CXX],
-                  [_AM_DEPENDENCIES(CXX)],
-                  [define([AC_PROG_][CXX],
-                          defn([AC_PROG_][CXX])[_AM_DEPENDENCIES(CXX)])])dnl
-])
-
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-#
-# FIXME: Once using 2.50, use this:
-# m4_match([$1], [^TRUE\|FALSE$], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_DEFUN([AM_CONDITIONAL],
-[ifelse([$1], [TRUE],
-        [errprint(__file__:__line__: [$0: invalid condition: $1
-])dnl
-m4exit(1)])dnl
-ifelse([$1], [FALSE],
-       [errprint(__file__:__line__: [$0: invalid condition: $1
-])dnl
-m4exit(1)])dnl
-AC_SUBST([$1_TRUE])
-AC_SUBST([$1_FALSE])
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Like AC_CONFIG_HEADER, but automatically create stamp file.
-
-# serial 3
-
-# When config.status generates a header, we must update the stamp-h file.
-# This file resides in the same directory as the config header
-# that is generated.  We must strip everything past the first ":",
-# and everything past the last "/".
-
-AC_PREREQ([2.12])
-
-AC_DEFUN([AM_CONFIG_HEADER],
-[ifdef([AC_FOREACH],dnl
-	 [dnl init our file count if it isn't already
-	 m4_ifndef([_AM_Config_Header_Index], m4_define([_AM_Config_Header_Index], [0]))
-	 dnl prepare to store our destination file list for use in config.status
-	 AC_FOREACH([_AM_File], [$1],
-		    [m4_pushdef([_AM_Dest], m4_patsubst(_AM_File, [:.*]))
-		    m4_define([_AM_Config_Header_Index], m4_incr(_AM_Config_Header_Index))
-		    dnl and add it to the list of files AC keeps track of, along
-		    dnl with our hook
-		    AC_CONFIG_HEADERS(_AM_File,
-dnl COMMANDS, [, INIT-CMDS]
-[# update the timestamp
-echo timestamp >"AS_ESCAPE(_AM_DIRNAME(]_AM_Dest[))/stamp-h]_AM_Config_Header_Index["
-][$2]m4_ifval([$3], [, [$3]]))dnl AC_CONFIG_HEADERS
-		    m4_popdef([_AM_Dest])])],dnl
-[AC_CONFIG_HEADER([$1])
-  AC_OUTPUT_COMMANDS(
-   ifelse(patsubst([$1], [[^ ]], []),
-	  [],
-	  [test -z "$CONFIG_HEADERS" || echo timestamp >dnl
-	   patsubst([$1], [^\([^:]*/\)?.*], [\1])stamp-h]),dnl
-[am_indx=1
-for am_file in $1; do
-  case " \$CONFIG_HEADERS " in
-  *" \$am_file "*)
-    am_dir=\`echo \$am_file |sed 's%:.*%%;s%[^/]*\$%%'\`
-    if test -n "\$am_dir"; then
-      am_tmpdir=\`echo \$am_dir |sed 's%^\(/*\).*\$%\1%'\`
-      for am_subdir in \`echo \$am_dir |sed 's%/% %'\`; do
-        am_tmpdir=\$am_tmpdir\$am_subdir/
-        if test ! -d \$am_tmpdir; then
-          mkdir \$am_tmpdir
-        fi
-      done
-    fi
-    echo timestamp > "\$am_dir"stamp-h\$am_indx
-    ;;
-  esac
-  am_indx=\`expr \$am_indx + 1\`
-done])
-])]) # AM_CONFIG_HEADER
-
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
-  am_missing_run="$MISSING --run "
-else
-  am_missing_run=
-  am_backtick='`'
-  AC_MSG_WARN([${am_backtick}missing' script is too old or missing])
-fi
-])
-
-# AM_AUX_DIR_EXPAND
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory.  The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run.  This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
-#
-# $ac_aux_dir/missing
-#    fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-#    fails if $ac_aux_dir is absolute,
-#    fails when called from a subdirectory in a VPATH build with
-#          a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir.  In an in-source build this is usually
-# harmless because $srcdir is `.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
-#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
-# and then we would define $MISSING as
-#   MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH.  The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-AC_DEFUN([AM_AUX_DIR_EXPAND], [
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`CDPATH=:; cd $ac_aux_dir && pwd`
-])
-
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
-AC_SUBST(install_sh)])
-
-# One issue with vendor `install' (even GNU) is that you can't
-# specify the program used to strip binaries.  This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in `make install-strip', and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
-
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE(dependency-tracking,
-[  --disable-dependency-tracking Speeds up one-time builds
-  --enable-dependency-tracking  Do not reject slow dependency extractors])
-if test "x$enable_dependency_tracking" != xno; then
-  am_depcomp="$ac_aux_dir/depcomp"
-  AMDEPBACKSLASH='\'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-pushdef([subst], defn([AC_SUBST]))
-subst(AMDEPBACKSLASH)
-popdef([subst])
-])
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES
-AC_DEFUN([AM_SET_DEPDIR],
-[rm -f .deps 2>/dev/null
-mkdir .deps 2>/dev/null
-if test -d .deps; then
-  DEPDIR=.deps
-else
-  # MS-DOS does not allow filenames that begin with a dot.
-  DEPDIR=_deps
-fi
-rmdir .deps 2>/dev/null
-AC_SUBST(DEPDIR)
-])
-
 

contrib/Makefile.in

+# Makefile.in generated automatically by automake 1.5 from Makefile.am.
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = @program_transform_name@
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+AMTAR = @AMTAR@
+AWK = @AWK@
+CC = @CC@
+CCLD = @CCLD@
+CXX = @CXX@
+DEPDIR = @DEPDIR@
+EXEEXT = @EXEEXT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+RPMSOURCEDIR = @RPMSOURCEDIR@
+VERSION = @VERSION@
+X_CFLAGS = @X_CFLAGS@
+X_EXTRA_LIBS = @X_EXTRA_LIBS@
+X_LIBS = @X_LIBS@
+X_PRE_LIBS = @X_PRE_LIBS@
+am__include = @am__include@
+am__quote = @am__quote@
+install_sh = @install_sh@
+
+LDADD = -L.. -lvncserver
+
+noinst_PROGRAMS = zippy
+
+@HAVE_X_TRUE@bin_PROGRAMS = x11vnc
+@HAVE_X_TRUE@x11vnc_SOURCES = x11vnc.c
+@HAVE_X_TRUE@INCLUDES = @X_CFLAGS@
+@HAVE_X_TRUE@x11vnc_LDADD = @X_LIBS@ $(LDADD)
+
+zippy_SOURCES = zippy.c
+subdir = contrib
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/include/rfbconfig.h
+CONFIG_CLEAN_FILES =
+@HAVE_X_TRUE@bin_PROGRAMS = x11vnc$(EXEEXT)
+@HAVE_X_FALSE@bin_PROGRAMS =
+noinst_PROGRAMS = zippy$(EXEEXT)
+PROGRAMS = $(bin_PROGRAMS) $(noinst_PROGRAMS)
+
+@HAVE_X_TRUE@am_x11vnc_OBJECTS = x11vnc.$(OBJEXT)
+@HAVE_X_FALSE@am_x11vnc_OBJECTS =
+x11vnc_OBJECTS = $(am_x11vnc_OBJECTS)
+@HAVE_X_TRUE@x11vnc_DEPENDENCIES =
+@HAVE_X_FALSE@x11vnc_DEPENDENCIES =
+x11vnc_LDFLAGS =
+am_zippy_OBJECTS = zippy.$(OBJEXT)
+zippy_OBJECTS = $(am_zippy_OBJECTS)
+zippy_LDADD = $(LDADD)
+zippy_DEPENDENCIES =
+zippy_LDFLAGS =
+
+DEFS = @DEFS@
+DEFAULT_INCLUDES =  -I. -I$(srcdir) -I$(top_builddir)/include
+CPPFLAGS = @CPPFLAGS@
+LDFLAGS = @LDFLAGS@
+LIBS = @LIBS@
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+@AMDEP_TRUE@DEP_FILES = $(DEPDIR)/x11vnc.Po $(DEPDIR)/zippy.Po
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+CFLAGS = @CFLAGS@
+DIST_SOURCES = $(x11vnc_SOURCES) $(zippy_SOURCES)
+DIST_COMMON = Makefile.am Makefile.in
+SOURCES = $(x11vnc_SOURCES) $(zippy_SOURCES)
+
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  contrib/Makefile
+Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && \
+	  CONFIG_HEADERS= CONFIG_LINKS= \
+	  CONFIG_FILES=$(subdir)/$@ $(SHELL) ./config.status
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(bindir)
+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+	  if test -f $$p \
+	  ; then \
+	    f=`echo $$p1|sed '$(transform);s/$$/$(EXEEXT)/'`; \
+	   echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$f"; \
+	   $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$f; \
+	  else :; fi; \
+	done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+	  f=`echo $$p|sed 's/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
+	  echo " rm -f $(DESTDIR)$(bindir)/$$f"; \
+	  rm -f $(DESTDIR)$(bindir)/$$f; \
+	done
+
+clean-binPROGRAMS:
+	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+
+clean-noinstPROGRAMS:
+	-test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS)
+x11vnc$(EXEEXT): $(x11vnc_OBJECTS) $(x11vnc_DEPENDENCIES) 
+	@rm -f x11vnc$(EXEEXT)
+	$(LINK) $(x11vnc_LDFLAGS) $(x11vnc_OBJECTS) $(x11vnc_LDADD) $(LIBS)
+zippy$(EXEEXT): $(zippy_OBJECTS) $(zippy_DEPENDENCIES) 
+	@rm -f zippy$(EXEEXT)
+	$(LINK) $(zippy_LDFLAGS) $(zippy_OBJECTS) $(zippy_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT) core *.core
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/x11vnc.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/zippy.Po@am__quote@
+
+distclean-depend:
+	-rm -rf $(DEPDIR)
+
+.c.o:
+@AMDEP_TRUE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(COMPILE) -c `test -f $< || echo '$(srcdir)/'`$<
+
+.c.obj:
+@AMDEP_TRUE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(COMPILE) -c `cygpath -w $<`
+CCDEPMODE = @CCDEPMODE@
+uninstall-info-am:
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique $(LISP)
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+	  || etags $(ETAGS_ARGS) $$tags  $$unique $(LISP)
+
+GTAGS:
+	here=`CDPATH=: && cd $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
+
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+	@for file in $(DISTFILES); do \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    $(mkinstalldirs) "$(distdir)/$$dir"; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    cp -pR $$d/$$file $(distdir) \
+	    || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS)
+
+installdirs:
+	$(mkinstalldirs) $(DESTDIR)$(bindir)
+
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic clean-noinstPROGRAMS \
+	mostlyclean-am
+
+distclean: distclean-am
+
+distclean-am: clean-am distclean-compile distclean-depend \
+	distclean-generic distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+uninstall-am: uninstall-binPROGRAMS uninstall-info-am
+
+.PHONY: GTAGS all all-am check check-am clean clean-binPROGRAMS \
+	clean-generic clean-noinstPROGRAMS distclean distclean-compile \
+	distclean-depend distclean-generic distclean-tags distdir dvi \
+	dvi-am info info-am install install-am install-binPROGRAMS \
+	install-data install-data-am install-exec install-exec-am \
+	install-info install-info-am install-man install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic tags uninstall uninstall-am \
+	uninstall-binPROGRAMS uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT: