improved accuracy of output coordinates


git-svn-id: https://pycam.svn.sourceforge.net/svnroot/pycam/trunk@1041 bbaffbd6-741e-11dd-a85d-61de82d9cad9

git-svn-id: https://pycam.svn.sourceforge.net/svnroot/pycam/trunk@1012 bbaffbd6-741e-11dd-a85d-61de82d9cad9

added an optional pause (M0) before and after touch off operations (useful for manually controlled spindles)


git-svn-id: https://pycam.svn.sourceforge.net/svnroot/pycam/trunk@1005 bbaffbd6-741e-11dd-a85d-61de82d9cad9

added configurable delay after start/stop spindle


git-svn-id: https://pycam.svn.sourceforge.net/svnroot/pycam/trunk@1002 bbaffbd6-741e-11dd-a85d-61de82d9cad9

fixed the order or vertices in STL output to avoid "vertex rotation" (caused no harm but resulted in different ascii output)


git-svn-id: https://pycam.svn.sourceforge.net/svnroot/pycam/trunk@990 bbaffbd6-741e-11dd-a85d-61de82d9cad9

fixed remaining issues with the new code


git-svn-id: https://pycam.svn.sourceforge.net/svnroot/pycam/trunk@989 bbaffbd6-741e-11dd-a85d-61de82d9cad9

improved implementation of GCode step width (for each axis)
adjusted GCode positioning accuracy according to the number of significant digits of the step width 


git-svn-id: https://pycam.svn.sourceforge.net/svnroot/pycam/trunk@987 bbaffbd6-741e-11dd-a85d-61de82d9cad9

disabled "namedtuple" for now (it was never in effect)


git-svn-id: https://pycam.svn.sourceforge.net/svnroot/pycam/trunk@975 bbaffbd6-741e-11dd-a85d-61de82d9cad9

git-svn-id: https://pycam.svn.sourceforge.net/svnroot/pycam/trunk@960 bbaffbd6-741e-11dd-a85d-61de82d9cad9

git-svn-id: https://pycam.svn.sourceforge.net/svnroot/pycam/trunk@956 bbaffbd6-741e-11dd-a85d-61de82d9cad9

simplified the "minimum_step" parameters for the GCode generator (fall back to x, if y/z are not given)


git-svn-id: https://pycam.svn.sourceforge.net/svnroot/pycam/trunk@953 bbaffbd6-741e-11dd-a85d-61de82d9cad9

An attempt to get the resolution for each axis to be controlled individually.  Now all axes properly named and working just fine...  changed the default to 0.0001 for now untill gcode resolution selection is available.

git-svn-id: https://pycam.svn.sourceforge.net/svnroot/pycam/trunk@946 bbaffbd6-741e-11dd-a85d-61de82d9cad9

git-svn-id: https://pycam.svn.sourceforge.net/svnroot/pycam/trunk@941 bbaffbd6-741e-11dd-a85d-61de82d9cad9

An attempt to get the resolution for each axis to be controlled individually.  However not implemented properly yet so all axes still key off the x-axis resolution.

git-svn-id: https://pycam.svn.sourceforge.net/svnroot/pycam/trunk@940 bbaffbd6-741e-11dd-a85d-61de82d9cad9

fix styling, make first Gcode command happen always, make rapid moves also obey minimum step distance

git-svn-id: https://pycam.svn.sourceforge.net/svnroot/pycam/trunk@937 bbaffbd6-741e-11dd-a85d-61de82d9cad9

this allows to change the hard-coded accuracy stepping implemented by paulusmax in r925


git-svn-id: https://pycam.svn.sourceforge.net/svnroot/pycam/trunk@927 bbaffbd6-741e-11dd-a85d-61de82d9cad9

made a minimum step distance for the Gcode exporter to allow configs for diferent resolution machines.  Also, the Gcode without this was making duplicate entries which causes the machine to stop and start inducing vibrations.  Compare from last point written to gcode.

git-svn-id: https://pycam.svn.sourceforge.net/svnroot/pycam/trunk@926 bbaffbd6-741e-11dd-a85d-61de82d9cad9

made a minimum step distance for the Gcode exporter to allow configs for diferent resolution machines.  Also, the Gcode without this was making duplicate entries which causes the machine to stop and start inducing vibrations.

git-svn-id: https://pycam.svn.sourceforge.net/svnroot/pycam/trunk@925 bbaffbd6-741e-11dd-a85d-61de82d9cad9

git-svn-id: https://pycam.svn.sourceforge.net/svnroot/pycam/trunk@844 bbaffbd6-741e-11dd-a85d-61de82d9cad9

git-svn-id: https://pycam.svn.sourceforge.net/svnroot/pycam/trunk@823 bbaffbd6-741e-11dd-a85d-61de82d9cad9

disabled code for adding comments to the STL files
fixed two sample STL files with wrong order of vertices


git-svn-id: https://pycam.svn.sourceforge.net/svnroot/pycam/trunk@718 bbaffbd6-741e-11dd-a85d-61de82d9cad9

more verbose output of the DXFImporter


git-svn-id: https://pycam.svn.sourceforge.net/svnroot/pycam/trunk@635 bbaffbd6-741e-11dd-a85d-61de82d9cad9

added new gcode settings:
 * start/stop spindle (M3/M5)
 * path mode (G61/G61.1/G64)
moved gcode settings to the general program preferences


git-svn-id: https://pycam.svn.sourceforge.net/svnroot/pycam/trunk@633 bbaffbd6-741e-11dd-a85d-61de82d9cad9

git-svn-id: https://pycam.svn.sourceforge.net/svnroot/pycam/trunk@598 bbaffbd6-741e-11dd-a85d-61de82d9cad9

git-svn-id: https://pycam.svn.sourceforge.net/svnroot/pycam/trunk@563 bbaffbd6-741e-11dd-a85d-61de82d9cad9

calculate all properties during instanciation (not on demand)


git-svn-id: https://pycam.svn.sourceforge.net/svnroot/pycam/trunk@561 bbaffbd6-741e-11dd-a85d-61de82d9cad9

 * first move is always up to safety height (before: diagonal movement starting from the current position)
 * removed "start position" - it is not relevant for the resulting gcode


git-svn-id: https://pycam.svn.sourceforge.net/svnroot/pycam/trunk@527 bbaffbd6-741e-11dd-a85d-61de82d9cad9

git-svn-id: https://pycam.svn.sourceforge.net/svnroot/pycam/trunk@496 bbaffbd6-741e-11dd-a85d-61de82d9cad9

 moved all source files to a separate "src" directory


git-svn-id: https://pycam.svn.sourceforge.net/svnroot/pycam/trunk@424 bbaffbd6-741e-11dd-a85d-61de82d9cad9