stupid paste issue fixed

README.md

-This is a python-based host software for reprap printers, in various forms.
-
-Printrun consists of printcore, pronsole and pronterface, and a small collection of helpful scripts.
-
-printcore.py is a library that makes writing reprap hosts easy
-pronsole.py is an interactive command-line host software with tabcompletion goodness
-pronterface.py is a graphical host software with the same functionality as pronsole
-
-INSTALLING DEPENDENCIES
-
-On Windows, download the following, and install in this order:
-http://python.org/ftp/python/2.7.2/python-2.7.2.msi
-http://pypi.python.org/packages/any/p/pyserial/pyserial-2.5.win32.exe
-http://downloads.sourceforge.net/wxpython/wxPython2.8-win32-unicode-2.8.12.0-py27.exe
-http://launchpad.net/pyreadline/trunk/1.7/+download/pyreadline-1.7.win32.exe
-
-On Ubuntu/debian, do:
-sudo apt-get install pThis is a python-based host software for reprap printers, in various forms.
-
 Printrun consists of printcore, pronsole and pronterface, and a small collection of helpful scripts.
 
   * printcore.py is a library that makes writing reprap hosts easy
@@ -107,68 +88,4 @@ p.pause()
 p.resume()
 p.disconnect()
 
-ython-serial python-wxgtk2.8
-
-On Fedora 15 do:
-sudo yum install pyserial wxpython
-
-On Mac OS X Lion:
-
-  1. Ensure that the active Python is the system version. (`brew uninstall python` or other appropriate incantations).
-
-
-On Mac OS X (pre Lion), download and install:
-http://downloads.sourceforge.net/wxpython/wxPython2.8-osx-unicode-2.8.12.0-universal-py2.6.dmg
-Grab the source for pyserial from http://pypi.python.org/packages/source/p/pyserial/pyserial-2.5.tar.gz
-Unzip pyserial to a folder. Then, in a terminal, change to the folder you unzipped to, then type in:
-defaults write com.apple.versioner.python Prefer-32-Bit -bool yes
-sudo python setup.py install
-
-Alternatively, you can run python in 32 bit mode by setting the following environment variable before running the setup.py command:
-export VERSIONER_PYTHON_PREFER_32_BIT=yes
-
-Then repeat the same with http://launchpad.net/pyreadline/trunk/1.7/+download/pyreadline-1.7.zip
-
-USING PRONTERFACE
-
-To use pronterface, you need: 
-python (ideally 2.6.x or 2.7.x), 
-pyserial (or python-serial on ubuntu/debian), 
-pyreadline (not needed on Linux) and
-wxPython
-
-Download and install the above, and start pronterface.py
-Select the port name you are using from the first drop-down, select your baud rate, and hit connect.
-Load an STL (see the note on skeinforge below) or GCODE file, and you can upload it to SD or print it directly.
-The "monitor printer" function, when enabled, checks the printer state (temperatures, SD print progress) every 3 seconds.
-The command box recognizes all pronsole commands, but has no tabcompletion.
-
-If you want to load stl files, you need to put a version of skeinforge (doesn't matter which one) in a folder called "skeinforge".
-The "skeinforge" folder must be in the same folder as pronterface.py
-
-USING PRONSOLE
-
-To use pronsole, you need: 
-python (ideally 2.6.x or 2.7.x), 
-pyserial (or python-serial on ubuntu/debian) and
-pyreadline (not needed on Linux)
-
-Start pronsole and you will be greeted with a command prompt. Type help to view the available commands.
-All commands have internal help, which you can access by typing "help commandname", for example "help connect"
-
-If you want to load stl files, you need to put a version of skeinforge (doesn't matter which one) in a folder called "skeinforge".
-The "skeinforge" folder must be in the same folder as pronsole.py
-
-USING PRINTCORE:
-
-To use printcore you need python (ideally 2.6.x or 2.7.x) and pyserial (or python-serial on ubuntu/debian)
-See pronsole for an example of a full-featured host, the bottom of printcore.py for a simple command-line 
-sender, or the following code example:
-
-p=printcore('/dev/ttyUSB0',115200)
-p.startprint(data) # data is an array of gcode lines
-p.send_now("M105") # sends M105 as soon as possible
-p.pause()
-p.resume()
-p.disconnect()