Merge remote branch 'kliment/master' into experimental

README.md

@@ -12,8 +12,7 @@ Download the following, and install in this order:
   1. http://python.org/ftp/python/2.7.2/python-2.7.2.msi
   2. http://pypi.python.org/packages/any/p/pyserial/pyserial-2.5.win32.exe
   3. http://downloads.sourceforge.net/wxpython/wxPython2.8-win32-unicode-2.8.12.0-py27.exe
-  4. http://launchpad.net/pyreadline/trunk/1.7/+download/pyreadline-1.7.win32.exe
-
+  4. http://launchpad.net/pyreadline/1.7/1.7/+download/pyreadline-1.7.zip
 ## Ubuntu/Debian
 `sudo apt-get install python-serial python-wxgtk2.8`
 
@@ -27,8 +26,10 @@ Download the following, and install in this order:
   3. Download and unpack pyserial from http://pypi.python.org/packages/source/p/pyserial/pyserial-2.5.tar.gz
   4. In a terminal, change to the folder you unzipped to, then type in: `sudo python setup.py install`
 
-The tools will run just fine in 64bit on Lion, you don't need to mess
-with any of the 32bit settings.
+The tools will probably run just fine in 64bit on Lion, you don't need to mess
+with any of the 32bit settings. In case they don't, try 
+  5. export VERSIONER_PYTHON_PREFER_32_BIT=yes
+in a terminal before running Pronterface
 
 ## Mac OS X (pre Lion)
   1. Download and install http://downloads.sourceforge.net/wxpython/wxPython2.8-osx-unicode-2.8.12.0-universal-py2.6.dmg

pronterface.py

@@ -146,13 +146,13 @@ class PronterWindow(wx.Frame,pronsole.pronsole):
         
     def endcb(self):
         if(self.p.queueindex==0):
-            print "Print took "+str(int(time.time()-self.starttime)/60)+" minutes "+str(int(time.time()-self.starttime)%60)+" seconds"
+            print "Print took "+str(int(time.time()-self.starttime)/60)+" minutes "+str(int(time.time()-self.starttime)%60)+" seconds."
             wx.CallAfter(self.pausebtn.Disable)
             wx.CallAfter(self.printbtn.SetLabel,_("Print"))
             
     
     def online(self):
-        print _("Printer is now online")
+        print _("Printer is now online.")
         wx.CallAfter(self.connectbtn.Disable)
         for i in self.printerControls:
             wx.CallAfter(i.Enable)
@@ -491,23 +491,45 @@ class PronterWindow(wx.Frame,pronsole.pronsole):
         
         lls.Add(wx.StaticText(self.panel,-1,_("Heater:"),pos=(0,343)),pos=(11,0),span=(1,1))
         htemp_choices=[self.temps[i]+" ("+i+")" for i in sorted(self.temps.keys(),key=lambda x:self.temps[x])]
+        
         if self.settings.last_temperature not in map(float,self.temps.values()):
             htemp_choices = [str(self.settings.last_temperature)] + htemp_choices
         self.htemp=wx.ComboBox(self.panel, -1,
                 choices=htemp_choices,style=wx.CB_DROPDOWN, size=(90,25),pos=(45,337))
-        self.htemp.SetValue("0")
+
+        
         lls.Add(self.htemp,pos=(11,1),span=(1,3))
         self.settbtn=wx.Button(self.panel,-1,_("Set"),size=(38,-1),pos=(135,335))
         self.settbtn.Bind(wx.EVT_BUTTON,self.do_settemp)
         self.printerControls.append(self.settbtn)
         lls.Add(self.settbtn,pos=(11,4),span=(1,2))
         lls.Add(wx.StaticText(self.panel,-1,_("Bed:"),pos=(0,343)),pos=(12,0),span=(1,1))
-        btemp_choices=[self.bedtemps[i]+" ("+i+")" for i in sorted(self.bedtemps.keys(),key=lambda x:self.bedtemps[x])]
+        btemp_choices=[self.bedtemps[i]+" ("+i+")" for i in sorted(self.bedtemps.keys(),key=lambda x:self.temps[x])]
         if self.settings.last_bed_temperature not in map(float,self.bedtemps.values()):
             btemp_choices = [str(self.settings.last_bed_temperature)] + btemp_choices
         self.btemp=wx.ComboBox(self.panel, -1,
                 choices=btemp_choices,style=wx.CB_DROPDOWN, size=(90,25),pos=(45,367))
-        self.btemp.SetValue("0")
+        self.btemp.SetValue(str(self.settings.last_bed_temperature))
+        self.htemp.SetValue(str(self.settings.last_temperature))
+         
+        
+        ## added for an error where only the bed would get (pla) or (abs). 
+        #This ensures, if last temp is a default pla or abs, it will be marked so.
+        # if it is not, then a (user) remark is added. This denotes a manual entry
+
+        for i in btemp_choices:
+            if i.split()[0] == str(self.settings.last_bed_temperature).split('.')[0] or i.split()[0] == str(self.settings.last_bed_temperature):
+                self.btemp.SetValue(i)
+        for i in htemp_choices:
+            if i.split()[0] == str(self.settings.last_temperature).split('.')[0] or i.split()[0] == str(self.settings.last_temperature) :
+               self.htemp.SetValue(i)
+
+        if( '(' not in self.btemp.Value):
+            self.btemp.SetValue(self.btemp.Value + ' (user)')
+        if( '(' not in self.htemp.Value):
+            self.htemp.SetValue(self.htemp.Value + ' (user)')   
+
+
         lls.Add(self.btemp,pos=(12,1),span=(1,3))
         self.setbbtn=wx.Button(self.panel,-1,_("Set"),size=(38,-1),pos=(135,365))
         self.setbbtn.Bind(wx.EVT_BUTTON,self.do_bedtemp)
@@ -1192,6 +1214,7 @@ class PronterWindow(wx.Frame,pronsole.pronsole):
         pass
         
     def pause(self,event):
+        print _("Paused.")
         if not self.paused:
             if self.sdprinting:
                 self.p.send_now("M25")
@@ -1217,6 +1240,7 @@ class PronterWindow(wx.Frame,pronsole.pronsole):
         pass
         
     def connect(self,event):
+        print _("Connecting...")
         port=None
         try:
             port=self.scanserial()[0]
@@ -1247,6 +1271,7 @@ class PronterWindow(wx.Frame,pronsole.pronsole):
         
         
     def disconnect(self,event):
+        print _("Disconnected.")
         self.p.disconnect()
         self.statuscheck=False
         
@@ -1267,6 +1292,7 @@ class PronterWindow(wx.Frame,pronsole.pronsole):
                 
     
     def reset(self,event):
+        print _("Reset.")
         dlg=wx.MessageDialog(self, _("Are you sure you want to reset the printer?"), _("Reset?"), wx.YES|wx.NO)
         if dlg.ShowModal()==wx.ID_YES:
             self.p.reset()