Deleted SFACT related stuff

sfact_profiles/profiles/cutting.csv

-Format is tab separated cutting settings.
-_Name                          	Value
-WindowPosition	0+400
-Profile Selection:	end_mill

sfact_profiles/profiles/extrusion.csv

-Format is tab separated extrusion settings.
-_Name                          	Value
-WindowPosition	0+400
-Profile Selection:	PLA

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/bottom.csv

-Format is tab separated bottom settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Bottom	
-Activate Bottom... and dont change anything else here!!!	True
-Additional Height (ratio):	0.5
-Altitude (mm):	0.0
-SVG Viewer:	webbrowser

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/carve.csv

-Format is tab separated carve settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Carve	
-Layer Height = Extrusion Thickness (mm):	0.33
-Extrusion Width (mm):	0.5
-Print from Layer No::	0
-Print up to Layer No:	912345678
-Infill in Direction of Bridge	True
-Correct Mesh	True
-Unproven Mesh	False
-SVG Viewer:	webbrowser
-Add Layer Template to SVG	True
-Extra Decimal Places (float):	2.0
-Import Coarseness (ratio):	1.0

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/chamber.csv

-Format is tab separated chamber settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Chamber	
-Activate Chamber..if you want below functions to work	True
-Heated PrintBed Temperature (Celcius):	60.0
-Turn print Bed Heater Off at Shut Down	True
-Turn Extruder Heater Off at Shut Down	True

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/clairvoyance.csv

-Format is tab separated clairvoyance settings.
-_Name                          	Value
-WindowPosition	700+0
-Activate Clairvoyance	False
-Open File to Generate Clairvoyances for	
-Gcode Program:	webbrowser

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/clip.csv

-Format is tab separated clip settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Clip	
-Activate Clip..to clip the extrusion that overlaps when printing perimeters	True
-Clip Over Perimeter Width adjuster (decrease for bigger gap):	1.0
-Threshold for connecting inner loops (ratio):	2.5

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/comb.csv

-Format is tab separated comb settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Comb	
-Activate Comb if you cant stop the extruder stringing by retraction 
-it will avoid moving over loops so the strings will be there 
-but not visible anymore. 
-Comb bends the extruder travel paths around holes in the slices, to avoid stringing.  
-so any start up ooze will be inside the shape.	True

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/comment.csv

-Format is tab separated comment settings.
-_Name                          	Value
-WindowPosition	700+0
-Activate Comment	False
-Open File to Write Comments for	

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/cool.csv

-Format is tab separated cool settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Cool	
-Activate Cool.. but use with a fan!	False
-Use Cool if layer takes shorter than(seconds):	10.0
-Turn Fan On at Beginning	True
-Turn Fan Off at Ending	True
-Execute when Cool starts:	cool_start.gmc
-Execute when Cool ends:	cool_end.gmc
-Orbiting around Object	False
-Slow Down during print	True
-Maximum Cool (Celcius):	2.0
-Bridge Cool (Celcius):	1.0
-Minimum Orbital Radius (millimeters):	10.0

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/dimension.csv

-Format is tab separated dimension settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Dimension	
-Activate Volumetric Extrusion (Stepper driven Extruders)	True
-Filament Diameter (mm):	1.75
-Filament Packing Density (ratio) lower=more extrusion:	1.0
-Retraction Distance (millimeters):	1.0
-Restart Extra Distance (millimeters):	0.0
-Extruder Retraction Speed (mm/s):	15.0
-Force to retract when crossing over spaces	True
-Minimum Extrusion before Retraction (millimeters):	1.0
-Minimum Travelmove after Retraction (millimeters):	1.0
-in Absolute units (Sprinter, FiveD a.o.)	True
-in Relative units (Teacup a.o.)	False

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/export.csv

-Format is tab separated export settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Export	
-Activate Export	True
-Add _export to filename (filename_export)	True
-Also Send Output To:	
-Do Not Delete Comments	False
-Delete Crafting Comments	False
-Delete All Comments	True
-Do Not Change Output	False
-gcode_small	True
-File Extension (gcode):	gcode
-Name of Replace File:	replace.csv
-Save Penultimate Gcode	False
-Archive Used Profile As Zip	False
-Export Profile Values As CSV File	False
-Add Profile Name to Filename	False
-Add Description to Filename	False
-Add Timestamp to Filename	False

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/fill.csv

-Format is tab separated fill settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Fill	
-Activate Fill:	True
-Infill Solidity (ratio):	0.35
-Extrusion Lines extra Spacing (Scaler):	1.0
-Infill Overlap over Perimeter (Scaler):	1.0
-Extra Shells on Alternating Solid Layer (layers):	1
-Extra Shells on Base (layers):	1
-Extra Shells on Sparse Layer (layers):	1
-Fully filled Layers (each top and bottom):	2
-Lower Left	True
-Nearest	False
-Infill > Loops > Perimeter	False
-Infill > Perimeter > Loops	False
-Loops > Infill > Perimeter	False
-Loops > Perimeter > Infill	False
-Perimeter > Infill > Loops	False
-Perimeter > Loops > Infill	True
-Line	True
-Grid Circular	False
-Grid Hexagonal	False
-Grid Rectangular	False
-Diaphragm at every ...th Layer:	100
-Diaphragm Thickness (layers):	0
-Grid Circle Separation over Perimeter Width (ratio):	0.2
-Grid Extra Overlap (ratio):	0.1
-Grid Junction Separation Band Height (layers):	10
-Grid Junction Separation over Octogon Radius At End (ratio):	0.0
-Grid Junction Separation over Octogon Radius At Middle (ratio):	0.0
-Infill Begin Rotation (degrees):	45.0
-Infill Begin Rotation Repeat (layers):	1
-Infill Odd Layer Extra Rotation (degrees):	90.0

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/home.csv

-Format is tab separated home settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Home	
-Activate Home ... Not needed	True
-Name of Homing File:	homing.gcode

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/inset.csv

-Format is tab separated inset settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Inset	
-Bridge Width Multiplier (ratio):	1.0
-Prefer Loops	False
-Prefer Perimeter	True
-Overlap Removal(Scaler):	1.0

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/interpret.csv

-Format is tab separated interpret settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Interpret	
-Activate Interpret	False
-Print Interpretion	False
-Text Program:	webbrowser

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/jitter.csv

-Format is tab separated jitter settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Jitter	
-Activate Jitter to have your perimeter and loop endpoints scattered	False
-Jitter Over Perimeter Width (ratio):	2.0

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/lash.csv

-Format is tab separated lash settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Lash	
-Activate Lash if you have backlash in your axes. 
-But its better to fix the mechanical problem!	False
-X Backlash (mm):	0.0
-Y Backlash (mm):	0.0

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/limit.csv

-Format is tab separated limit settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Limit	
-Activate Limit if your Firmware is unable to Limiting your Z-Speed.	False
-Maximum Initial Feed Rate (mm/s):	5.0
-Maximum Z Feed Rate (mm/s):	5.0

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/multiply.csv

-Format is tab separated multiply settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Multiply	
-Activate Multiply: 	True
-Center X (mm):	100.0
-Center Y (mm):	100.0
-Number of Columns (integer):	1
-Number of Rows (integer):	1
-Separation over Perimeter Width (ratio):	15.0

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/polyfile.csv

-Format is tab separated polyfile settings.
-_Name                          	Value
-WindowPosition	700+0
-Execute All Unmodified Files in a Directory	False
-Execute File	True

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/preface.csv

-Format is tab separated preface settings.
-Home before Print	False
-_Name                          	Value
-WindowPosition	700+0
-Open File for Preface	
-Reset Extruder before Print	True
-Meta:	
-Name of End File:	end.gmc
-Name of Start File:	start.gmc
-Set Positioning to Absolute	True
-Set Units to Millimeters	True

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/raft.csv

-Format is tab separated raft settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Raft	
-Activate Raft	True
-Add Raft, Elevate Nozzle, Orbit:	True
-None	True
-Empty Layers Only	False
-Everywhere	False
-Exterior Only	False
-Add support if flatter than (degrees):	50.0
-Cross Hatch instead of Lines	False
-Interface/Support Lines Density (ratio):	0.25
-Interface/Support Layer Thickness over Layer Thickness:	1.0
-Support Feed Rate mm/sec:	15.0
-Support Flow Rate (scaler):	1.0
-Support Gap over Perimeter Extrusion Width (ratio):	1.0
-Raft/Support extension in (%):	5.0
-Raft/Support extension in(mm):	2.0
-Name of Support End File:	support_end.gmc
-Name of Support Start File:	support_start.gmc
-Extra Nozzle clearance over Object(ratio):	0.0
-First Layer Main Feedrate (mm/s):	35.0
-First Layer Perimeter Feedrate (mm/s):	25.0
-First Layer Flow Rate Infill(scaler):	1.0
-First Layer Flow Rate Perimeter(scaler):	1.0
-Interface Layers (integer):	0
-Interface Feed Rate Multiplier (ratio):	1.0
-Interface Flow Rate Multiplier (ratio):	1.0
-Interface Nozzle Lift over Interface Layer Thickness (ratio):	0.45
-Base Layers (integer):	0
-Base Feed Rate Multiplier (ratio):	0.5
-Base Flow Rate Multiplier (ratio):	0.5
-Base Infill Density (ratio):	0.5
-Base Layer Thickness over Layer Thickness:	2.0
-Base Nozzle Lift over Base Layer Thickness (ratio):	0.4
-Initial Circling:	False
-Infill Overhang over Extrusion Width (ratio):	3.0

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/scale.csv

-Format is tab separated scale settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Scale	
-Activate Scale to finetune print size (try to find the fault somewhere else..):	False
-XY Plane Scale (ratio):	1.0
-Z Axis Scale (ratio):	1.0
-SVG Viewer:	webbrowser

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/skeinforge.csv

-Format is tab separated skeinforge settings.
-_Name                          	Value
-WindowPosition	1187+2
-Open File for Skeinforge	C:/Users/Ahmet/STL/_Screw Holder Bottom.stl
-analyze	False
-craft	True
-help	False
-meta	False
-profile	False

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/skeinforge_analyze.csv

-Format is tab separated skeinforge analyze settings.
-_Name                          	Value
-WindowPosition	600+0
-Open File for Analyze	
-clairvoyance	False
-comment	False
-interpret	False
-skeiniso	True
-skeinlayer	False
-statistic	False
-vectorwrite	False

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/skeinforge_craft.csv

-Format is tab separated skeinforge craft settings.
-_Name                          	Value
-WindowPosition	600+0
-Open File for Craft	
-bottom	False
-carve	False
-chamber	False
-clip	False
-comb	False
-cool	False
-dimension	True
-export	False
-fill	False
-inset	False
-jitter	False
-lash	False
-limit	False
-multiply	False
-preface	False
-raft	False
-scale	False
-skin	False
-skirt	False
-speed	False
-stretch	False
-temperature	False
-wipe	False

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/skeinforge_help.csv

-Format is tab separated skeinforge help settings.
-_Name                          	Value
-WindowPosition	600+0
-Wiki Manual Primary	True

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/skeiniso.csv

-Format is tab separated skeiniso settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Skeiniso	
-Activate Skeiniso	True
-Frame List
-Animation Line Quickening (ratio):	1.0
-Animation Slide Show Rate (layers/second):	2.0
-Axis Rulings	True
-Band Height (layers):	5
-Bottom Band Brightness (ratio):	0.7
-Bottom Layer Brightness (ratio):	1.0
-From the Bottom	False
-From the Top	True
-Draw Arrows	False
-Go Around Extruder Off Travel	False
-Layer (index):	0
-Layer Extra Span (integer):	912345678
-Line (index):	24
-Display Line	True
-View Move	False
-View Rotate	False
-Number of Fill Bottom Layers (integer):	1
-Number of Fill Top Layers (integer):	1
-Scale (pixels per millimeter):	15.0
-Screen Horizontal Inset (pixels):	100
-Screen Vertical Inset (pixels):	220
-Show Gcode	True
-Viewpoint Latitude (degrees):	15.0
-Viewpoint Longitude (degrees):	210.0
-Width of Axis Negative Side (pixels):	2
-Width of Axis Positive Side (pixels):	6
-Width of Fill Bottom Thread (pixels):	2
-Width of Fill Top Thread (pixels):	2
-Width of Infill Thread (pixels):	1
-Width of Loop Thread (pixels):	2
-Width of Perimeter Inside Thread (pixels):	8
-Width of Perimeter Outside Thread (pixels):	8
-Width of Raft Thread (pixels):	1
-Width of Selection Thread (pixels):	6
-Width of Travel Thread (pixels):	0

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/skeinlayer.csv

-Format is tab separated skeinlayer settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Skeinlayer	
-Activate Skeinlayer	True
-Frame List
-Animation Line Quickening (ratio):	1.0
-Animation Slide Show Rate (layers/second):	2.0
-Draw Arrows	True
-Go Around Extruder Off Travel	False
-Layer (index):	0
-Layer Extra Span (integer):	0
-Line (index):	430
-Display Line	True
-View Move	False
-Scale (pixels per millimeter):	25.0
-Screen Horizontal Inset (pixels):	100
-Screen Vertical Inset (pixels):	220
-Show Gcode	True
-Show Position	True
-Width of Extrusion Thread (pixels):	3
-Width of Selection Thread (pixels):	6
-Width of Travel Thread (pixels):	1

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/skin.csv

-Format is tab separated skin settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Skin	
-Activate Skin: this is experimental.  
-It prints the perimeters and loops only at half the layer height that is specified under carve.	False
-Clip Over Perimeter Width (scaler):	1.0
-Do Not Skin the first ... Layers:	3

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/skirt.csv

-Format is tab separated skirt settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Skirt	
-Activate Skirt:	True
-Convex:	True
-Gap over Perimeter Width (ratio):	5.0
-Layers To (index):	3

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/speed.csv

-Format is tab separated speed settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Speed	
-Activate Speed:	True
-Add Flow Rate:	True
-Main Feed Rate (mm/s):	60.0
-Main Flow Rate  (scaler):	1.0
-Feed Rate ratio for Orbiting move (ratio):	0.5
-Perimeter Feed Rate (mm/s):	30.0
-Perimeter Flow Rate (scaler):	1.0
-Bridge Feed Rate (ratio):	1.0
-Bridge Flow Rate (scaler):	1.0
-Travel Feed Rate (mm/s):	130.0

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/statistic.csv

-Format is tab separated statistic settings.
-_Name                          	Value
-WindowPosition	700+0
-Activate Statistic	True
-Machine Time ($/hour):	1.0
-Material ($/kg):	20.0
-Density (kg/m3):	930.0
-Extrusion Diameter over Thickness (ratio):	1.25
-Open File to Generate Statistics for	
-Print Statistics	True
-Save Statistics	False

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/stretch.csv

-Format is tab separated stretch settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Stretch	
-Activate Stretch to correct for diameter shrink in small diameter holes	False
-Cross Limit Distance Over Perimeter Width (ratio):	5.0
-Loop Stretch Over Perimeter Width (ratio):	0.11
-Path Stretch Over Perimeter Width (ratio):	0.0
-Perimeter Inside Stretch Over Perimeter Width (ratio):	0.32
-Perimeter Outside Stretch Over Perimeter Width (ratio):	0.1
-Stretch From Distance Over Perimeter Width (ratio):	2.0

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/temperature.csv

-Format is tab separated temperature settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Temperature	
-Activate Temperature:	False
-Cooling Rate (Celcius/second):	3.0
-Heating Rate (Celcius/second):	3.0
-Base Temperature (Celcius):	210.0
-Interface Temperature (Celcius):	210.0
-Object First Layer Infill Temperature (Celcius):	210.0
-Object First Layer Perimeter Temperature (Celcius):	210.0
-Object Next Layers Temperature (Celcius):	210.0
-Support Layers Temperature (Celcius):	210.0
-Supported Layers Temperature (Celcius):	210.0

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/vectorwrite.csv

-Format is tab separated vectorwrite settings.
-_Name                          	Value
-WindowPosition	700+0
-Activate Vectorwrite	False
-Open File to Write Vector Graphics for	
-Add Loops	True
-Add Paths	True
-Add Perimeters	True
-Layers From (index):	0
-Layers To (index):	912345678
-SVG Viewer:	webbrowser

sfact_profiles/profiles/extrusion/1.7mm-0.3 nozzle/wipe.csv

-Format is tab separated wipe settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Wipe	
-Activate Wipe	False
-Location Arrival X (mm):	0.0
-Location Arrival Y (mm):	5.0
-Location Arrival Z (mm):	0.0
-Location Departure X (mm):	5.0
-Location Departure Y (mm):	0.0
-Location Departure Z (mm):	0.0
-Location Wipe X (mm):	0.0
-Location Wipe Y (mm):	0.0
-Location Wipe Z (mm):	0.0
-Wipe Period (layers):	15

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/bottom.csv

-Format is tab separated bottom settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Bottom	
-Activate Bottom... and dont change anything else here!!!	True
-Additional Height (ratio):	0.5
-Altitude (mm):	0.0
-SVG Viewer:	webbrowser

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/carve.csv

-Format is tab separated carve settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Carve	
-Layer Height = Extrusion Thickness (mm):	0.4
-Extrusion Width (mm):	0.6
-Print from Layer No::	0
-Print up to Layer No:	912345678
-Infill in Direction of Bridge	True
-Correct Mesh	True
-Unproven Mesh	False
-SVG Viewer:	webbrowser
-Add Layer Template to SVG	True
-Extra Decimal Places (float):	2.0
-Import Coarseness (ratio):	1.0

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/chamber.csv

-Format is tab separated chamber settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Chamber	
-Activate Chamber..if you want below functions to work	True
-Heated PrintBed Temperature (Celcius):	60.0
-Turn print Bed Heater Off at Shut Down	True
-Turn Extruder Heater Off at Shut Down	True

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/clairvoyance.csv

-Format is tab separated clairvoyance settings.
-_Name                          	Value
-WindowPosition	700+0
-Activate Clairvoyance	False
-Open File to Generate Clairvoyances for	
-Gcode Program:	webbrowser

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/clip.csv

-Format is tab separated clip settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Clip	
-Activate Clip..to clip the extrusion that overlaps when printing perimeters	True
-Clip Over Perimeter Width adjuster (decrease for bigger gap):	1.0
-Threshold for connecting inner loops (ratio):	2.5

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/comb.csv

-Format is tab separated comb settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Comb	
-Activate Comb if you cant stop the extruder stringing by retraction 
-it will avoid moving over loops so the strings will be there 
-but not visible anymore. 
-Comb bends the extruder travel paths around holes in the slices, to avoid stringing.  
-so any start up ooze will be inside the shape.	True

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/comment.csv

-Format is tab separated comment settings.
-_Name                          	Value
-WindowPosition	700+0
-Activate Comment	False
-Open File to Write Comments for	

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/cool.csv

-Format is tab separated cool settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Cool	
-Activate Cool.. but use with a fan!	False
-Use Cool if layer takes shorter than(seconds):	10.0
-Turn Fan On at Beginning	True
-Turn Fan Off at Ending	True
-Execute when Cool starts:	cool_start.gmc
-Execute when Cool ends:	cool_end.gmc
-Orbiting around Object	False
-Slow Down during print	True
-Maximum Cool (Celcius):	2.0
-Bridge Cool (Celcius):	1.0
-Minimum Orbital Radius (millimeters):	10.0

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/dimension.csv

-Format is tab separated dimension settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Dimension	
-Activate Volumetric Extrusion (Stepper driven Extruders)	True
-Filament Diameter (mm):	1.75
-Filament Packing Density (ratio) lower=more extrusion:	1.0
-Retraction Distance (millimeters):	1.0
-Restart Extra Distance (millimeters):	0.0
-Extruder Retraction Speed (mm/s):	15.0
-Force to retract when crossing over spaces	True
-Minimum Extrusion before Retraction (millimeters):	1.0
-Minimum Travelmove after Retraction (millimeters):	1.0
-in Absolute units (Sprinter, FiveD a.o.)	True
-in Relative units (Teacup a.o.)	False

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/export.csv

-Format is tab separated export settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Export	
-Activate Export	True
-Add _export to filename (filename_export)	True
-Also Send Output To:	
-Do Not Delete Comments	False
-Delete Crafting Comments	False
-Delete All Comments	True
-Do Not Change Output	False
-gcode_small	True
-File Extension (gcode):	gcode
-Name of Replace File:	replace.csv
-Save Penultimate Gcode	False
-Archive Used Profile As Zip	False
-Export Profile Values As CSV File	False
-Add Profile Name to Filename	False
-Add Description to Filename	False
-Add Timestamp to Filename	False

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/fill.csv

-Format is tab separated fill settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Fill	
-Activate Fill:	True
-Infill Solidity (ratio):	0.35
-Extrusion Lines extra Spacing (Scaler):	1.0
-Infill Overlap over Perimeter (Scaler):	1.0
-Extra Shells on Alternating Solid Layer (layers):	1
-Extra Shells on Base (layers):	1
-Extra Shells on Sparse Layer (layers):	1
-Fully filled Layers (each top and bottom):	2
-Lower Left	True
-Nearest	False
-Infill > Loops > Perimeter	False
-Infill > Perimeter > Loops	False
-Loops > Infill > Perimeter	False
-Loops > Perimeter > Infill	False
-Perimeter > Infill > Loops	False
-Perimeter > Loops > Infill	True
-Line	True
-Grid Circular	False
-Grid Hexagonal	False
-Grid Rectangular	False
-Diaphragm at every ...th Layer:	100
-Diaphragm Thickness (layers):	0
-Grid Circle Separation over Perimeter Width (ratio):	0.2
-Grid Extra Overlap (ratio):	0.1
-Grid Junction Separation Band Height (layers):	10
-Grid Junction Separation over Octogon Radius At End (ratio):	0.0
-Grid Junction Separation over Octogon Radius At Middle (ratio):	0.0
-Infill Begin Rotation (degrees):	45.0
-Infill Begin Rotation Repeat (layers):	1
-Infill Odd Layer Extra Rotation (degrees):	90.0

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/home.csv

-Format is tab separated home settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Home	
-Activate Home ... Not needed	True
-Name of Homing File:	homing.gcode

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/inset.csv

-Format is tab separated inset settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Inset	
-Bridge Width Multiplier (ratio):	1.0
-Prefer Loops	False
-Prefer Perimeter	True
-Overlap Removal(Scaler):	1.0

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/interpret.csv

-Format is tab separated interpret settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Interpret	
-Activate Interpret	False
-Print Interpretion	False
-Text Program:	webbrowser

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/jitter.csv

-Format is tab separated jitter settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Jitter	
-Activate Jitter to have your perimeter and loop endpoints scattered	False
-Jitter Over Perimeter Width (ratio):	2.0

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/lash.csv

-Format is tab separated lash settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Lash	
-Activate Lash if you have backlash in your axes. 
-But its better to fix the mechanical problem!	False
-X Backlash (mm):	0.0
-Y Backlash (mm):	0.0

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/limit.csv

-Format is tab separated limit settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Limit	
-Activate Limit if your Firmware is unable to Limiting your Z-Speed.	False
-Maximum Initial Feed Rate (mm/s):	5.0
-Maximum Z Feed Rate (mm/s):	5.0

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/multiply.csv

-Format is tab separated multiply settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Multiply	
-Activate Multiply: 	True
-Center X (mm):	100.0
-Center Y (mm):	100.0
-Number of Columns (integer):	1
-Number of Rows (integer):	1
-Separation over Perimeter Width (ratio):	15.0

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/polyfile.csv

-Format is tab separated polyfile settings.
-_Name                          	Value
-WindowPosition	700+0
-Execute All Unmodified Files in a Directory	False
-Execute File	True

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/preface.csv

-Format is tab separated preface settings.
-Home before Print	False
-_Name                          	Value
-WindowPosition	700+0
-Open File for Preface	
-Reset Extruder before Print	True
-Meta:	
-Name of End File:	end.gmc
-Name of Start File:	start.gmc
-Set Positioning to Absolute	True
-Set Units to Millimeters	True

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/raft.csv

-Format is tab separated raft settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Raft	
-Activate Raft	True
-Add Raft, Elevate Nozzle, Orbit:	True
-None	True
-Empty Layers Only	False
-Everywhere	False
-Exterior Only	False
-Add support if flatter than (degrees):	50.0
-Cross Hatch instead of Lines	False
-Interface/Support Lines Density (ratio):	0.25
-Interface/Support Layer Thickness over Layer Thickness:	1.0
-Support Feed Rate mm/sec:	15.0
-Support Flow Rate (scaler):	1.0
-Support Gap over Perimeter Extrusion Width (ratio):	1.0
-Raft/Support extension in (%):	5.0
-Raft/Support extension in(mm):	2.0
-Name of Support End File:	support_end.gmc
-Name of Support Start File:	support_start.gmc
-Extra Nozzle clearance over Object(ratio):	0.0
-First Layer Main Feedrate (mm/s):	35.0
-First Layer Perimeter Feedrate (mm/s):	25.0
-First Layer Flow Rate Infill(scaler):	1.0
-First Layer Flow Rate Perimeter(scaler):	1.0
-Interface Layers (integer):	0
-Interface Feed Rate Multiplier (ratio):	1.0
-Interface Flow Rate Multiplier (ratio):	1.0
-Interface Nozzle Lift over Interface Layer Thickness (ratio):	0.45
-Base Layers (integer):	0
-Base Feed Rate Multiplier (ratio):	0.5
-Base Flow Rate Multiplier (ratio):	0.5
-Base Infill Density (ratio):	0.5
-Base Layer Thickness over Layer Thickness:	2.0
-Base Nozzle Lift over Base Layer Thickness (ratio):	0.4
-Initial Circling:	False
-Infill Overhang over Extrusion Width (ratio):	3.0

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/scale.csv

-Format is tab separated scale settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Scale	
-Activate Scale to finetune print size (try to find the fault somewhere else..):	False
-XY Plane Scale (ratio):	1.0
-Z Axis Scale (ratio):	1.0
-SVG Viewer:	webbrowser

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/skeinforge.csv

-Format is tab separated skeinforge settings.
-_Name                          	Value
-WindowPosition	1187+2
-Open File for Skeinforge	C:/Users/Ahmet/STL/_Screw Holder Bottom.stl
-analyze	False
-craft	True
-help	False
-meta	False
-profile	False

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/skeinforge_analyze.csv

-Format is tab separated skeinforge analyze settings.
-_Name                          	Value
-WindowPosition	600+0
-Open File for Analyze	
-clairvoyance	False
-comment	False
-interpret	False
-skeiniso	True
-skeinlayer	True
-statistic	False
-vectorwrite	False

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/skeinforge_craft.csv

-Format is tab separated skeinforge craft settings.
-_Name                          	Value
-WindowPosition	600+0
-Open File for Craft	
-bottom	False
-carve	False
-chamber	False
-clip	False
-comb	False
-cool	False
-dimension	True
-export	False
-fill	False
-inset	False
-jitter	False
-lash	False
-limit	False
-multiply	False
-preface	False
-raft	False
-scale	False
-skin	False
-skirt	False
-speed	False
-stretch	False
-temperature	False
-wipe	False

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/skeinforge_help.csv

-Format is tab separated skeinforge help settings.
-_Name                          	Value
-WindowPosition	600+0
-Wiki Manual Primary	True

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/skeiniso.csv

-Format is tab separated skeiniso settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Skeiniso	
-Activate Skeiniso	True
-Frame List
-Animation Line Quickening (ratio):	1.0
-Animation Slide Show Rate (layers/second):	2.0
-Axis Rulings	True
-Band Height (layers):	5
-Bottom Band Brightness (ratio):	0.7
-Bottom Layer Brightness (ratio):	1.0
-From the Bottom	False
-From the Top	True
-Draw Arrows	False
-Go Around Extruder Off Travel	False
-Layer (index):	0
-Layer Extra Span (integer):	912345678
-Line (index):	24
-Display Line	True
-View Move	False
-View Rotate	False
-Number of Fill Bottom Layers (integer):	1
-Number of Fill Top Layers (integer):	1
-Scale (pixels per millimeter):	15.0
-Screen Horizontal Inset (pixels):	100
-Screen Vertical Inset (pixels):	220
-Show Gcode	True
-Viewpoint Latitude (degrees):	15.0
-Viewpoint Longitude (degrees):	210.0
-Width of Axis Negative Side (pixels):	2
-Width of Axis Positive Side (pixels):	6
-Width of Fill Bottom Thread (pixels):	2
-Width of Fill Top Thread (pixels):	2
-Width of Infill Thread (pixels):	1
-Width of Loop Thread (pixels):	2
-Width of Perimeter Inside Thread (pixels):	8
-Width of Perimeter Outside Thread (pixels):	8
-Width of Raft Thread (pixels):	1
-Width of Selection Thread (pixels):	6
-Width of Travel Thread (pixels):	0

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/skeinlayer.csv

-Format is tab separated skeinlayer settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Skeinlayer	
-Activate Skeinlayer	True
-Frame List
-Animation Line Quickening (ratio):	1.0
-Animation Slide Show Rate (layers/second):	2.0
-Draw Arrows	True
-Go Around Extruder Off Travel	False
-Layer (index):	0
-Layer Extra Span (integer):	0
-Line (index):	430
-Display Line	True
-View Move	False
-Scale (pixels per millimeter):	25.0
-Screen Horizontal Inset (pixels):	100
-Screen Vertical Inset (pixels):	220
-Show Gcode	True
-Show Position	True
-Width of Extrusion Thread (pixels):	3
-Width of Selection Thread (pixels):	6
-Width of Travel Thread (pixels):	1

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/skin.csv

-Format is tab separated skin settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Skin	
-Activate Skin: this is experimental.  
-It prints the perimeters and loops only at half the layer height that is specified under carve.	False
-Clip Over Perimeter Width (scaler):	1.0
-Do Not Skin the first ... Layers:	3

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/skirt.csv

-Format is tab separated skirt settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Skirt	
-Activate Skirt:	True
-Convex:	True
-Gap over Perimeter Width (ratio):	5.0
-Layers To (index):	3

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/speed.csv

-Format is tab separated speed settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Speed	
-Activate Speed:	True
-Add Flow Rate:	True
-Main Feed Rate (mm/s):	60.0
-Main Flow Rate  (scaler):	1.0
-Feed Rate ratio for Orbiting move (ratio):	0.5
-Perimeter Feed Rate (mm/s):	30.0
-Perimeter Flow Rate (scaler):	1.0
-Bridge Feed Rate (ratio):	1.0
-Bridge Flow Rate (scaler):	1.0
-Travel Feed Rate (mm/s):	130.0

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/statistic.csv

-Format is tab separated statistic settings.
-_Name                          	Value
-WindowPosition	700+0
-Activate Statistic	True
-Machine Time ($/hour):	1.0
-Material ($/kg):	20.0
-Density (kg/m3):	930.0
-Extrusion Diameter over Thickness (ratio):	1.25
-Open File to Generate Statistics for	
-Print Statistics	True
-Save Statistics	False

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/stretch.csv

-Format is tab separated stretch settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Stretch	
-Activate Stretch to correct for diameter shrink in small diameter holes	False
-Cross Limit Distance Over Perimeter Width (ratio):	5.0
-Loop Stretch Over Perimeter Width (ratio):	0.11
-Path Stretch Over Perimeter Width (ratio):	0.0
-Perimeter Inside Stretch Over Perimeter Width (ratio):	0.32
-Perimeter Outside Stretch Over Perimeter Width (ratio):	0.1
-Stretch From Distance Over Perimeter Width (ratio):	2.0

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/temperature.csv

-Format is tab separated temperature settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Temperature	
-Activate Temperature:	False
-Cooling Rate (Celcius/second):	3.0
-Heating Rate (Celcius/second):	3.0
-Base Temperature (Celcius):	210.0
-Interface Temperature (Celcius):	210.0
-Object First Layer Infill Temperature (Celcius):	210.0
-Object First Layer Perimeter Temperature (Celcius):	210.0
-Object Next Layers Temperature (Celcius):	210.0
-Support Layers Temperature (Celcius):	210.0
-Supported Layers Temperature (Celcius):	210.0

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/vectorwrite.csv

-Format is tab separated vectorwrite settings.
-_Name                          	Value
-WindowPosition	700+0
-Activate Vectorwrite	False
-Open File to Write Vector Graphics for	
-Add Loops	True
-Add Paths	True
-Add Perimeters	True
-Layers From (index):	0
-Layers To (index):	912345678
-SVG Viewer:	webbrowser

sfact_profiles/profiles/extrusion/1.7mm-0.5 nozzle/wipe.csv

-Format is tab separated wipe settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Wipe	
-Activate Wipe	False
-Location Arrival X (mm):	0.0
-Location Arrival Y (mm):	5.0
-Location Arrival Z (mm):	0.0
-Location Departure X (mm):	5.0
-Location Departure Y (mm):	0.0
-Location Departure Z (mm):	0.0
-Location Wipe X (mm):	0.0
-Location Wipe Y (mm):	0.0
-Location Wipe Z (mm):	0.0
-Wipe Period (layers):	33333

sfact_profiles/profiles/extrusion/3mm-0.3 nozzle/bottom.csv

-Format is tab separated bottom settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Bottom	
-Activate Bottom... and dont change anything else here!!!	True
-Additional Height (ratio):	0.5
-Altitude (mm):	0.0
-SVG Viewer:	webbrowser

sfact_profiles/profiles/extrusion/3mm-0.3 nozzle/carve.csv

-Format is tab separated carve settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Carve	
-Layer Height = Extrusion Thickness (mm):	0.33
-Extrusion Width (mm):	0.5
-Print from Layer No::	0
-Print up to Layer No:	912345678
-Infill in Direction of Bridge	True
-Correct Mesh	True
-Unproven Mesh	False
-SVG Viewer:	webbrowser
-Add Layer Template to SVG	True
-Extra Decimal Places (float):	2.0
-Import Coarseness (ratio):	1.0

sfact_profiles/profiles/extrusion/3mm-0.3 nozzle/chamber.csv

-Format is tab separated chamber settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Chamber	
-Activate Chamber..if you want below functions to work	True
-Heated PrintBed Temperature (Celcius):	60.0
-Turn print Bed Heater Off at Shut Down	True
-Turn Extruder Heater Off at Shut Down	True

sfact_profiles/profiles/extrusion/3mm-0.3 nozzle/clairvoyance.csv

-Format is tab separated clairvoyance settings.
-_Name                          	Value
-WindowPosition	700+0
-Activate Clairvoyance	False
-Open File to Generate Clairvoyances for	
-Gcode Program:	webbrowser

sfact_profiles/profiles/extrusion/3mm-0.3 nozzle/clip.csv

-Format is tab separated clip settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Clip	
-Activate Clip..to clip the extrusion that overlaps when printing perimeters	True
-Clip Over Perimeter Width adjuster (decrease for bigger gap):	1.0
-Threshold for connecting inner loops (ratio):	2.5

sfact_profiles/profiles/extrusion/3mm-0.3 nozzle/comb.csv

-Format is tab separated comb settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Comb	
-Activate Comb if you cant stop the extruder stringing by retraction 
-it will avoid moving over loops so the strings will be there 
-but not visible anymore. 
-Comb bends the extruder travel paths around holes in the slices, to avoid stringing.  
-so any start up ooze will be inside the shape.	True

sfact_profiles/profiles/extrusion/3mm-0.3 nozzle/comment.csv

-Format is tab separated comment settings.
-_Name                          	Value
-WindowPosition	700+0
-Activate Comment	False
-Open File to Write Comments for	

sfact_profiles/profiles/extrusion/3mm-0.3 nozzle/cool.csv

-Format is tab separated cool settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Cool	
-Activate Cool.. but use with a fan!	False
-Use Cool if layer takes shorter than(seconds):	10.0
-Turn Fan On at Beginning	True
-Turn Fan Off at Ending	True
-Execute when Cool starts:	cool_start.gmc
-Execute when Cool ends:	cool_end.gmc
-Orbiting around Object	False
-Slow Down during print	True
-Maximum Cool (Celcius):	2.0
-Bridge Cool (Celcius):	1.0
-Minimum Orbital Radius (millimeters):	10.0

sfact_profiles/profiles/extrusion/3mm-0.3 nozzle/dimension.csv

-Format is tab separated dimension settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Dimension	
-Activate Volumetric Extrusion (Stepper driven Extruders)	True
-Filament Diameter (mm):	2.85
-Filament Packing Density (ratio) lower=more extrusion:	1.0
-Retraction Distance (millimeters):	1.0
-Restart Extra Distance (millimeters):	0.0
-Extruder Retraction Speed (mm/s):	15.0
-Force to retract when crossing over spaces	True
-Minimum Extrusion before Retraction (millimeters):	1.0
-Minimum Travelmove after Retraction (millimeters):	1.0
-in Absolute units (Sprinter, FiveD a.o.)	True
-in Relative units (Teacup a.o.)	False

sfact_profiles/profiles/extrusion/3mm-0.3 nozzle/export.csv

-Format is tab separated export settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Export	
-Activate Export	True
-Add _export to filename (filename_export)	True
-Also Send Output To:	
-Do Not Delete Comments	False
-Delete Crafting Comments	False
-Delete All Comments	True
-Do Not Change Output	False
-gcode_small	True
-File Extension (gcode):	gcode
-Name of Replace File:	replace.csv
-Save Penultimate Gcode	False
-Archive Used Profile As Zip	False
-Export Profile Values As CSV File	False
-Add Profile Name to Filename	False
-Add Description to Filename	False
-Add Timestamp to Filename	False

sfact_profiles/profiles/extrusion/3mm-0.3 nozzle/fill.csv

-Format is tab separated fill settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Fill	
-Activate Fill:	True
-Infill Solidity (ratio):	0.35
-Extrusion Lines extra Spacing (Scaler):	1.0
-Infill Overlap over Perimeter (Scaler):	1.0
-Extra Shells on Alternating Solid Layer (layers):	1
-Extra Shells on Base (layers):	1
-Extra Shells on Sparse Layer (layers):	1
-Fully filled Layers (each top and bottom):	2
-Lower Left	True
-Nearest	False
-Infill > Loops > Perimeter	False
-Infill > Perimeter > Loops	False
-Loops > Infill > Perimeter	False
-Loops > Perimeter > Infill	False
-Perimeter > Infill > Loops	False
-Perimeter > Loops > Infill	True
-Line	True
-Grid Circular	False
-Grid Hexagonal	False
-Grid Rectangular	False
-Diaphragm at every ...th Layer:	100
-Diaphragm Thickness (layers):	0
-Grid Circle Separation over Perimeter Width (ratio):	0.2
-Grid Extra Overlap (ratio):	0.1
-Grid Junction Separation Band Height (layers):	10
-Grid Junction Separation over Octogon Radius At End (ratio):	0.0
-Grid Junction Separation over Octogon Radius At Middle (ratio):	0.0
-Infill Begin Rotation (degrees):	45.0
-Infill Begin Rotation Repeat (layers):	1
-Infill Odd Layer Extra Rotation (degrees):	90.0

sfact_profiles/profiles/extrusion/3mm-0.3 nozzle/home.csv

-Format is tab separated home settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Home	
-Activate Home ... Not needed	True
-Name of Homing File:	homing.gcode

sfact_profiles/profiles/extrusion/3mm-0.3 nozzle/inset.csv

-Format is tab separated inset settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Inset	
-Bridge Width Multiplier (ratio):	1.0
-Prefer Loops	False
-Prefer Perimeter	True
-Overlap Removal(Scaler):	1.0

sfact_profiles/profiles/extrusion/3mm-0.3 nozzle/interpret.csv

-Format is tab separated interpret settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Interpret	
-Activate Interpret	False
-Print Interpretion	False
-Text Program:	webbrowser

sfact_profiles/profiles/extrusion/3mm-0.3 nozzle/jitter.csv

-Format is tab separated jitter settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Jitter	
-Activate Jitter to have your perimeter and loop endpoints scattered	False
-Jitter Over Perimeter Width (ratio):	2.0

sfact_profiles/profiles/extrusion/3mm-0.3 nozzle/lash.csv

-Format is tab separated lash settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Lash	
-Activate Lash if you have backlash in your axes. 
-But its better to fix the mechanical problem!	False
-X Backlash (mm):	0.0
-Y Backlash (mm):	0.0

sfact_profiles/profiles/extrusion/3mm-0.3 nozzle/limit.csv

-Format is tab separated limit settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Limit	
-Activate Limit if your Firmware is unable to Limiting your Z-Speed.	False
-Maximum Initial Feed Rate (mm/s):	5.0
-Maximum Z Feed Rate (mm/s):	5.0

sfact_profiles/profiles/extrusion/3mm-0.3 nozzle/multiply.csv

-Format is tab separated multiply settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Multiply	
-Activate Multiply: 	True
-Center X (mm):	100.0
-Center Y (mm):	100.0
-Number of Columns (integer):	1
-Number of Rows (integer):	1
-Separation over Perimeter Width (ratio):	15.0

sfact_profiles/profiles/extrusion/3mm-0.3 nozzle/polyfile.csv

-Format is tab separated polyfile settings.
-_Name                          	Value
-WindowPosition	700+0
-Execute All Unmodified Files in a Directory	False
-Execute File	True

sfact_profiles/profiles/extrusion/3mm-0.3 nozzle/preface.csv

-_Name                          	Value
-Format is tab separated preface settings.
-Home before Print	False
-Meta:
-Name of End File:	end.gmc
-Name of Start File:	start.gmc
-Open File for Preface
-Reset Extruder before Print	True
-Set Positioning to Absolute	True
-Set Units to Millimeters	True
-WindowPosition	700+0

sfact_profiles/profiles/extrusion/3mm-0.3 nozzle/raft.csv

-Format is tab separated raft settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Raft	
-Activate Raft	True
-Add Raft, Elevate Nozzle, Orbit:	True
-None	True
-Empty Layers Only	False
-Everywhere	False
-Exterior Only	False
-Add support if flatter than (degrees):	50.0
-Cross Hatch instead of Lines	False
-Interface/Support Lines Density (ratio):	0.25
-Interface/Support Layer Thickness over Layer Thickness:	1.0
-Support Feed Rate mm/sec:	15.0
-Support Flow Rate (scaler):	1.0
-Support Gap over Perimeter Extrusion Width (ratio):	1.0
-Raft/Support extension in (%):	5.0
-Raft/Support extension in(mm):	2.0
-Name of Support End File:	support_end.gmc
-Name of Support Start File:	support_start.gmc
-Extra Nozzle clearance over Object(ratio):	0.0
-First Layer Main Feedrate (mm/s):	35.0
-First Layer Perimeter Feedrate (mm/s):	25.0
-First Layer Flow Rate Infill(scaler):	1.0
-First Layer Flow Rate Perimeter(scaler):	1.0
-Interface Layers (integer):	0
-Interface Feed Rate Multiplier (ratio):	1.0
-Interface Flow Rate Multiplier (ratio):	1.0
-Interface Nozzle Lift over Interface Layer Thickness (ratio):	0.45
-Base Layers (integer):	0
-Base Feed Rate Multiplier (ratio):	0.5
-Base Flow Rate Multiplier (ratio):	0.5
-Base Infill Density (ratio):	0.5
-Base Layer Thickness over Layer Thickness:	2.0
-Base Nozzle Lift over Base Layer Thickness (ratio):	0.4
-Initial Circling:	False
-Infill Overhang over Extrusion Width (ratio):	3.0

sfact_profiles/profiles/extrusion/3mm-0.3 nozzle/scale.csv

-Format is tab separated scale settings.
-_Name                          	Value
-WindowPosition	700+0
-Open File for Scale	
-Activate Scale to finetune print size (try to find the fault somewhere else..):	False
-XY Plane Scale (ratio):	1.0
-Z Axis Scale (ratio):	1.0
-SVG Viewer:	webbrowser

sfact_profiles/profiles/extrusion/3mm-0.3 nozzle/skeinforge.csv

-Format is tab separated skeinforge settings.
-_Name                          	Value
-WindowPosition	1187+2
-Open File for Skeinforge	C:/Users/Ahmet/STL/_Screw Holder Bottom.stl
-analyze	False
-craft	True
-help	False
-meta	False
-profile	False

sfact_profiles/profiles/extrusion/3mm-0.3 nozzle/skeinforge_analyze.csv

-Format is tab separated skeinforge analyze settings.
-_Name                          	Value
-WindowPosition	600+0
-Open File for Analyze	
-clairvoyance	False
-comment	False
-interpret	False
-skeiniso	True
-skeinlayer	False
-statistic	False
-vectorwrite	False

sfact_profiles/profiles/extrusion/3mm-0.3 nozzle/skeinforge_craft.csv

-Format is tab separated skeinforge craft settings.
-_Name                          	Value
-WindowPosition	600+0
-Open File for Craft	
-bottom	False
-carve	False
-chamber	False
-clip	False
-comb	False
-cool	False
-dimension	True
-export	False
-fill	False
-inset	False
-jitter	False
-lash	False
-limit	False
-multiply	False
-preface	False
-raft	False
-scale	False
-skin	False
-skirt	False
-speed	False
-stretch	False
-temperature	False
-wipe	False