Update Configuration_Delta.h

MarlinKimbra/Configuration_Delta.h

@@ -104,6 +104,16 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 
 #define min_software_endstops true // If true, axis won't move to coordinates less than HOME_POS.
 #define max_software_endstops true  // If true, axis won't move to coordinates greater than the defined lengths below.
+
+// The position of the homing switches
+#define MANUAL_HOME_POSITIONS  // If defined, MANUAL_*_HOME_POS below will be used
+#define BED_CENTER_AT_0_0  // If defined, the center of the bed is at (X=0, Y=0)
+
+//Manual homing switch locations:
+#define MANUAL_X_HOME_POS 0
+#define MANUAL_Y_HOME_POS 0
+#define MANUAL_Z_HOME_POS 210 // Distance between nozzle and print surface after homing.
+
 // Travel limits after homing
 #define X_MAX_POS PRINTER_RADIUS
 #define X_MIN_POS -PRINTER_RADIUS
@@ -116,15 +126,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 #define Y_MAX_LENGTH (Y_MAX_POS - Y_MIN_POS)
 #define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS)
 
-// The position of the homing switches
-#define MANUAL_HOME_POSITIONS  // If defined, MANUAL_*_HOME_POS below will be used
-#define BED_CENTER_AT_0_0  // If defined, the center of the bed is at (X=0, Y=0)
-
-//Manual homing switch locations:
-#define MANUAL_X_HOME_POS 0
-#define MANUAL_Y_HOME_POS 0
-#define MANUAL_Z_HOME_POS 210 // Distance between nozzle and print surface after homing.
-
 //// MOVEMENT SETTINGS
 #define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
 #define HOMING_FEEDRATE {100*60, 100*60, 100*60, 0}  // set the homing speeds (mm/min)
@@ -143,4 +144,3 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 #define DEFAULT_XYJERK                20.0    // (mm/sec)
 #define DEFAULT_ZJERK                 20.0    // (mm/sec)
 #define DEFAULT_EJERK                 5.0     // (mm/sec)
-