Skip to content

M
MarlinKimbra
Commit f0c43905 authored by MagoKimbra's avatar MagoKimbra
Browse files
Options

Update pins.h & pins2tools.h

parent ce489f47
Hide whitespace changes
Inline Side-by-side
Showing with 445 additions and 435 deletions
MarlinKimbra/pins.h
View file @ f0c43905
......@@ -14,11 +14,11 @@
* 22 BOARD_GEN3_MONOLITHIC - Gen3 Monolithic Electronics
*
* 3 BOARD_RAMPS_OLD - MEGA/RAMPS up to 1.2
* 33 BOARD_RAMPS_13_EFB - RAMPS 1.3 / 1.4 (Power outputs: Extruder, Fan, Bed)
* 33 BOARD_RAMPS_13_EFB - RAMPS 1.3 / 1.4 (Power outputs: Hotend0, Fan, Bed)
* 34 BOARD_RAMPS_13_EEB - RAMPS 1.3 / 1.4 (Power outputs: Hotend0, Hotend1, Bed)
* 35 BOARD_RAMPS_13_EFF - RAMPS 1.3 / 1.4 (Power outputs: Extruder, Fan, Fan)
* 35 BOARD_RAMPS_13_EFF - RAMPS 1.3 / 1.4 (Power outputs: Hotend0, Fan, Fan)
* 36 BOARD_RAMPS_13_EEF - RAMPS 1.3 / 1.4 (Power outputs: Hotend0, Hotend1, Fan)
* 37 BOARD_RAMPS_13_EEF - RAMPS 1.3 / 1.4 (Power outputs: Hotend0, Hotend1, Hotend2)
* 37 BOARD_RAMPS_13_EEE - RAMPS 1.3 / 1.4 (Power outputs: Hotend0, Hotend1, Hotend2)
*
*301 BOARD_RAMBO - Rambo
*302 BOARD_MINIRAMBO - Mini Rambo
......@@ -39,7 +39,7 @@
* 63 BOARD_MELZI - Melzi
* 64 BOARD_STB_11 - STB V1.1
* 65 BOARD_AZTEEG_X1 - Azteeg X1
* 66 BOARD_MELZI_1284 - Melzi with ATmega1284 (MaKr3d version)
* 66 BOARD_MELZI_MAKR3D - Melzi with ATmega1284 (MaKr3d version)
* 67 BOARD_AZTEEG_X3 - Azteeg X3
* 68 BOARD_AZTEEG_X3_PRO - Azteeg X3 Pro
*
......@@ -129,15 +129,15 @@
#define ORIG_E0_DIR_PIN 27
#define ORIG_E0_ENABLE_PIN 24
#define TEMP_0_PIN 2
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
#define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed)
#define ORIG_TEMP_0_PIN 2
#define ORIG_TEMP_1_PIN -1
#define ORIG_TEMP_2_PIN -1
#define ORIG_TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed)
#define HEATER_0_PIN 4
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define HEATER_BED_PIN 3 // (bed)
#define ORIG_HEATER_0_PIN 4
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_HEATER_BED_PIN 3 // (bed)
#define SDPOWER -1
#define SDSS 31 // SCL pin of I2C header || CS Pin for SD Card support
......@@ -216,15 +216,15 @@
#define ORIG_E0_DIR_PIN 27
#define ORIG_E0_ENABLE_PIN 24
#define TEMP_0_PIN 1
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
#define TEMP_BED_PIN 2
#define ORIG_TEMP_0_PIN 1
#define ORIG_TEMP_1_PIN -1
#define ORIG_TEMP_2_PIN -1
#define ORIG_TEMP_BED_PIN 2
#define HEATER_0_PIN 4
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define HEATER_BED_PIN 3
#define ORIG_HEATER_0_PIN 4
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_HEATER_BED_PIN 3
#define KILL_PIN -1
......@@ -291,15 +291,15 @@
#define ORIG_E0_DIR_PIN 27
#define ORIG_E0_ENABLE_PIN 24
#define TEMP_0_PIN 1
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
#define TEMP_BED_PIN 2
#define ORIG_TEMP_0_PIN 1
#define ORIG_TEMP_1_PIN -1
#define ORIG_TEMP_2_PIN -1
#define ORIG_TEMP_BED_PIN 2
#define HEATER_0_PIN 4
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define HEATER_BED_PIN 3
#define ORIG_HEATER_0_PIN 4
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_HEATER_BED_PIN 3
#define KILL_PIN -1
......@@ -362,15 +362,15 @@
#define ORIG_E0_DIR_PIN 18
#define ORIG_E0_ENABLE_PIN 25
#define TEMP_0_PIN 1
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
#define TEMP_BED_PIN 0
#define ORIG_TEMP_0_PIN 1
#define ORIG_TEMP_1_PIN -1
#define ORIG_TEMP_2_PIN -1
#define ORIG_TEMP_BED_PIN 0
#define HEATER_0_PIN 4
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define HEATER_BED_PIN 3
#define ORIG_HEATER_0_PIN 4
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_HEATER_BED_PIN 3
#define KILL_PIN -1
......@@ -455,18 +455,18 @@
#define PS_ON_PIN -1
#define KILL_PIN -1
#define HEATER_0_PIN 19 // EXTRUDER 1
#define HEATER_1_PIN 23 // EXTRUDER 2
#define ORIG_HEATER_0_PIN 19 // EXTRUDER 1
#define ORIG_HEATER_1_PIN 23 // EXTRUDER 2
//HeatedBad
#define HEATER_BED_PIN 22
#define ORIG_HEATER_BED_PIN 22
//Cheaptronic v1.0 hasent EXTRUDER 3
#define HEATER_2_PIN -1
#define ORIG_HEATER_2_PIN -1
//Temperature sensors
#define TEMP_0_PIN 15
#define TEMP_1_PIN 14
#define TEMP_2_PIN -1
#define TEMP_BED_PIN 13
#define ORIG_TEMP_0_PIN 15
#define ORIG_TEMP_1_PIN 14
#define ORIG_TEMP_2_PIN -1
#define ORIG_TEMP_BED_PIN 13
//Cheaptronic v1.0 dont support LCD
#define LCD_PINS_RS -1
......@@ -532,15 +532,15 @@
#define ORIG_E0_DIR_PIN 27
#define ORIG_E0_ENABLE_PIN 24
#define TEMP_0_PIN 1
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
#define TEMP_BED_PIN 2
#define ORIG_TEMP_0_PIN 1
#define ORIG_TEMP_1_PIN -1
#define ORIG_TEMP_2_PIN -1
#define ORIG_TEMP_BED_PIN 2
#define HEATER_0_PIN 4
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define HEATER_BED_PIN 3
#define ORIG_HEATER_0_PIN 4
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_HEATER_BED_PIN 3
#define KILL_PIN -1
......@@ -623,14 +623,14 @@
#define PS_ON_PIN 10 //Set to -1 if using a manual switch on the PWRSW Connector
#define SLEEP_WAKE_PIN 26 //This feature still needs work
#define HEATER_0_PIN 45 //12V PWM1
#define HEATER_1_PIN 46 //12V PWM2
#define HEATER_2_PIN 17 //12V PWM3
#define HEATER_BED_PIN 44 //DOUBLE 12V PWM
#define TEMP_0_PIN 3 //ANALOG NUMBERING
#define TEMP_1_PIN 2 //ANALOG NUMBERING
#define TEMP_2_PIN 1 //ANALOG NUMBERING
#define TEMP_BED_PIN 0 //ANALOG NUMBERING
#define ORIG_HEATER_0_PIN 45 //12V PWM1
#define ORIG_HEATER_1_PIN 46 //12V PWM2
#define ORIG_HEATER_2_PIN 17 //12V PWM3
#define ORIG_HEATER_BED_PIN 44 //DOUBLE 12V PWM
#define ORIG_TEMP_0_PIN 3 //ANALOG NUMBERING
#define ORIG_TEMP_1_PIN 2 //ANALOG NUMBERING
#define ORIG_TEMP_2_PIN 1 //ANALOG NUMBERING
#define ORIG_TEMP_BED_PIN 0 //ANALOG NUMBERING
#define BEEPER_PIN 36
......@@ -735,14 +735,14 @@
#define ORIG_E0_DIR_PIN 17
#define ORIG_E0_ENABLE_PIN 3
#define HEATER_0_PIN 16
#define TEMP_0_PIN 0
#define ORIG_HEATER_0_PIN 16
#define ORIG_TEMP_0_PIN 0
#define ORIG_FAN_PIN -1
//bed pins
#define HEATER_BED_PIN -1
#define TEMP_BED_PIN -1
#define ORIG_HEATER_BED_PIN -1
#define ORIG_TEMP_BED_PIN -1
#define SDSS -1
#define SDPOWER -1
......@@ -753,9 +753,9 @@
//Alex extras from Gen3+
#define KILL_PIN -1
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
#define HEATER_2_PIN -1
#define ORIG_TEMP_1_PIN -1
#define ORIG_TEMP_2_PIN -1
#define ORIG_HEATER_2_PIN -1
#endif // GEN3_MONOLITHIC
/****************************************************************************************/
......@@ -806,21 +806,21 @@
#define KILL_PIN -1
#ifdef RAMPS_V_1_0 // RAMPS_V_1_0
#define HEATER_0_PIN 12 // RAMPS 1.0
#define HEATER_BED_PIN -1 // RAMPS 1.0
#define ORIG_HEATER_0_PIN 12 // RAMPS 1.0
#define ORIG_HEATER_BED_PIN -1 // RAMPS 1.0
#define ORIG_FAN_PIN 11 // RAMPS 1.0
#else // RAMPS_V_1_1 or RAMPS_V_1_2
#define HEATER_0_PIN 10 // RAMPS 1.1
#define HEATER_BED_PIN 8 // RAMPS 1.1
#define ORIG_HEATER_0_PIN 10 // RAMPS 1.1
#define ORIG_HEATER_BED_PIN 8 // RAMPS 1.1
#define ORIG_FAN_PIN 9 // RAMPS 1.1
#endif
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define TEMP_0_PIN 2 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
#define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_TEMP_0_PIN 2 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define ORIG_TEMP_1_PIN -1
#define ORIG_TEMP_2_PIN -1
#define ORIG_TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
// SPI for Max6675 Thermocouple
#ifndef SDSUPPORT
......@@ -903,18 +903,18 @@
#define ORIG_FAN_PIN 9
#define PS_ON_PIN 12
#define HEATER_0_PIN 10 // Hotend 1
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define HEATER_3_PIN -1
#define ORIG_HEATER_0_PIN 10 // Hotend 1
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_HEATER_3_PIN -1
#define TEMP_0_PIN 13 // ANALOG NUMBERING
#define TEMP_1_PIN 15 // ANALOG NUMBERING
#define TEMP_2_PIN -1 // ANALOG NUMBERING
#define TEMP_3_PIN -1 // ANALOG NUMBERING
#define ORIG_TEMP_0_PIN 13 // ANALOG NUMBERING
#define ORIG_TEMP_1_PIN 15 // ANALOG NUMBERING
#define ORIG_TEMP_2_PIN -1 // ANALOG NUMBERING
#define ORIG_TEMP_3_PIN -1 // ANALOG NUMBERING
#define HEATER_BED_PIN 8 // BED
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
#define ORIG_HEATER_BED_PIN 8 // BED
#define ORIG_TEMP_BED_PIN 14 // ANALOG NUMBERING
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) || ENABLED(G3D_PANEL)
#define KILL_PIN 41
......@@ -1112,18 +1112,18 @@
#define ORIG_FAN_PIN 4
#define PS_ON_PIN 12
#define HEATER_0_PIN 10 // HOTEND 1
#define HEATER_1_PIN 9 // HOTEND 2
#define HEATER_2_PIN -1
#define HEATER_3_PIN -1
#define ORIG_HEATER_0_PIN 10 // HOTEND 1
#define ORIG_HEATER_1_PIN 9 // HOTEND 2
#define ORIG_HEATER_2_PIN -1
#define ORIG_HEATER_3_PIN -1
#define TEMP_0_PIN 13 // ANALOG NUMBERING
#define TEMP_1_PIN 15 // ANALOG NUMBERING
#define TEMP_2_PIN -1 // ANALOG NUMBERING
#define TEMP_3_PIN -1 // ANALOG NUMBERING
#define ORIG_TEMP_0_PIN 13 // ANALOG NUMBERING
#define ORIG_TEMP_1_PIN 15 // ANALOG NUMBERING
#define ORIG_TEMP_2_PIN -1 // ANALOG NUMBERING
#define ORIG_TEMP_3_PIN -1 // ANALOG NUMBERING
#define HEATER_BED_PIN 8 // BED
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
#define ORIG_HEATER_BED_PIN 8 // BED
#define ORIG_TEMP_BED_PIN 14 // ANALOG NUMBERING
#if NUM_SERVOS > 0
#define SERVO0_PIN 11
......@@ -1315,18 +1315,18 @@
#define ORIG_FAN_PIN 9
#define PS_ON_PIN 12
#define HEATER_0_PIN 10 // HOTEND 1
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define HEATER_3_PIN -1
#define ORIG_HEATER_0_PIN 10 // HOTEND 1
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_HEATER_3_PIN -1
#define TEMP_0_PIN 13 // ANALOG NUMBERING
#define TEMP_1_PIN 15 // ANALOG NUMBERING
#define TEMP_2_PIN -1 // ANALOG NUMBERING
#define TEMP_3_PIN -1 // ANALOG NUMBERING
#define ORIG_TEMP_0_PIN 13 // ANALOG NUMBERING
#define ORIG_TEMP_1_PIN 15 // ANALOG NUMBERING
#define ORIG_TEMP_2_PIN -1 // ANALOG NUMBERING
#define ORIG_TEMP_3_PIN -1 // ANALOG NUMBERING
#define HEATER_BED_PIN -1 // BED
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
#define ORIG_HEATER_BED_PIN -1 // BED
#define ORIG_TEMP_BED_PIN 14 // ANALOG NUMBERING
#if NUM_SERVOS > 0
#define SERVO0_PIN 11
......@@ -1518,18 +1518,18 @@
#define ORIG_FAN_PIN 8
#define PS_ON_PIN 12
#define HEATER_0_PIN 10 // HOTEND 1
#define HEATER_1_PIN 9 // HOTEND 2
#define HEATER_2_PIN -1
#define HEATER_3_PIN -1
#define ORIG_HEATER_0_PIN 10 // HOTEND 1
#define ORIG_HEATER_1_PIN 9 // HOTEND 2
#define ORIG_HEATER_2_PIN -1
#define ORIG_HEATER_3_PIN -1
#define TEMP_0_PIN 13 // ANALOG NUMBERING
#define TEMP_1_PIN 15 // ANALOG NUMBERING
#define TEMP_2_PIN -1 // ANALOG NUMBERING
#define TEMP_3_PIN -1 // ANALOG NUMBERING
#define ORIG_TEMP_0_PIN 13 // ANALOG NUMBERING
#define ORIG_TEMP_1_PIN 15 // ANALOG NUMBERING
#define ORIG_TEMP_2_PIN -1 // ANALOG NUMBERING
#define ORIG_TEMP_3_PIN -1 // ANALOG NUMBERING
#define HEATER_BED_PIN 8 // BED
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
#define ORIG_HEATER_BED_PIN 8 // BED
#define ORIG_TEMP_BED_PIN 14 // ANALOG NUMBERING
#if NUM_SERVOS > 0
#define SERVO0_PIN 11
......@@ -1721,18 +1721,18 @@
#define ORIG_FAN_PIN 8
#define PS_ON_PIN 12
#define HEATER_0_PIN 10 // HOTEND 1
#define HEATER_1_PIN 9 // HOTEND 2
#define HEATER_2_PIN 8 // HOTEND 3
#define HEATER_3_PIN -1
#define ORIG_HEATER_0_PIN 10 // HOTEND 1
#define ORIG_HEATER_1_PIN 9 // HOTEND 2
#define ORIG_HEATER_2_PIN 8 // HOTEND 3
#define ORIG_HEATER_3_PIN -1
#define TEMP_0_PIN 13 // ANALOG NUMBERING
#define TEMP_1_PIN 15 // ANALOG NUMBERING
#define TEMP_2_PIN 14 // ANALOG NUMBERING
#define TEMP_3_PIN -1 // ANALOG NUMBERING
#define ORIG_TEMP_0_PIN 13 // ANALOG NUMBERING
#define ORIG_TEMP_1_PIN 15 // ANALOG NUMBERING
#define ORIG_TEMP_2_PIN 14 // ANALOG NUMBERING
#define ORIG_TEMP_3_PIN -1 // ANALOG NUMBERING
#define HEATER_BED_PIN -1 // BED
#define TEMP_BED_PIN -1 // ANALOG NUMBERING
#define ORIG_HEATER_BED_PIN -1 // BED
#define ORIG_TEMP_BED_PIN -1 // ANALOG NUMBERING
#if NUM_SERVOS > 0
#define SERVO0_PIN 11
......@@ -1901,21 +1901,21 @@
#define Z_MS1_PIN 68
#define Z_MS2_PIN 67
#define HEATER_BED_PIN 3
#define TEMP_BED_PIN 2
#define ORIG_HEATER_BED_PIN 3
#define ORIG_TEMP_BED_PIN 2
#define HEATER_0_PIN 9
#define TEMP_0_PIN 0
#define ORIG_HEATER_0_PIN 9
#define ORIG_TEMP_0_PIN 0
#define HEATER_1_PIN 7
#define TEMP_1_PIN 1
#define ORIG_HEATER_1_PIN 7
#define ORIG_TEMP_1_PIN 1
#ifdef BARICUDA
#define HEATER_2_PIN 6
#define ORIG_HEATER_2_PIN 6
#else
#define HEATER_2_PIN -1
#define ORIG_HEATER_2_PIN -1
#endif
#define TEMP_2_PIN -1
#define ORIG_TEMP_2_PIN -1
#define ORIG_E0_STEP_PIN 34
#define ORIG_E0_DIR_PIN 43
......@@ -2036,14 +2036,14 @@
#define PS_ON_PIN -1
#define KILL_PIN -1
#define HEATER_0_PIN 6
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
#define HEATER_BED_PIN -1
#define TEMP_BED_PIN -1
#define ORIG_HEATER_0_PIN 6
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define ORIG_TEMP_1_PIN -1
#define ORIG_TEMP_2_PIN -1
#define ORIG_HEATER_BED_PIN -1
#define ORIG_TEMP_BED_PIN -1
#endif // DUEMILANOVE_328P
/****************************************************************************************/
......@@ -2109,16 +2109,16 @@
#define KILL_PIN -1
#define HEATER_BED_PIN 7 // BED
#define HEATER_0_PIN 13
#define HEATER_1_PIN 12
#define HEATER_2_PIN 11
#define ORIG_HEATER_BED_PIN 7 // BED
#define ORIG_HEATER_0_PIN 13
#define ORIG_HEATER_1_PIN 12
#define ORIG_HEATER_2_PIN 11
#define TEMP_BED_PIN 4 // ANALOG NUMBERING
#define TEMP_0_PIN 0 // ANALOG NUMBERING
#define TEMP_1_PIN -1 // 1 // ANALOG NUMBERING
#define TEMP_2_PIN -1 // 2 // ANALOG NUMBERING
#define TEMP_3_PIN -1 // 3 // ANALOG NUMBERING
#define ORIG_TEMP_BED_PIN 4 // ANALOG NUMBERING
#define ORIG_TEMP_0_PIN 0 // ANALOG NUMBERING
#define ORIG_TEMP_1_PIN -1 // 1 // ANALOG NUMBERING
#define ORIG_TEMP_2_PIN -1 // 2 // ANALOG NUMBERING
#define ORIG_TEMP_3_PIN -1 // 3 // ANALOG NUMBERING
......@@ -2247,19 +2247,19 @@
#define KILL_PIN -1
#define HEATER_BED_PIN 8 // BED
#define ORIG_HEATER_BED_PIN 8 // BED
#define HEATER_0_PIN 9
#define HEATER_1_PIN 10
#define HEATER_2_PIN 11
#define ORIG_HEATER_0_PIN 9
#define ORIG_HEATER_1_PIN 10
#define ORIG_HEATER_2_PIN 11
#define TEMP_BED_PIN 7 // ANALOG NUMBERING
#define ORIG_TEMP_BED_PIN 7 // ANALOG NUMBERING
#define TEMP_0_PIN 6 // ANALOG NUMBERING
#define TEMP_1_PIN 5 // 2 // ANALOG NUMBERING
#define TEMP_2_PIN 4 // 3 // ANALOG NUMBERING
#define ORIG_TEMP_0_PIN 6 // ANALOG NUMBERING
#define ORIG_TEMP_1_PIN 5 // 2 // ANALOG NUMBERING
#define ORIG_TEMP_2_PIN 4 // 3 // ANALOG NUMBERING
#define TEMP_3_PIN -1 // ANALOG NUMBERING
#define ORIG_TEMP_3_PIN -1 // ANALOG NUMBERING
#define TEMP_4_PIN -1 // ANALOG NUMBERING
......@@ -2414,20 +2414,20 @@
#define ORIG_E0_STEP_PIN 4 //Edited @ EJE Electronics 20100715
#define ORIG_E0_DIR_PIN 2 //Edited @ EJE Electronics 20100715
#define ORIG_E0_ENABLE_PIN 3 //Added @ EJE Electronics 20100715
#define TEMP_0_PIN 5 //changed @ rkoeppl 20110410
#define TEMP_1_PIN -1 //changed @ rkoeppl 20110410
#define ORIG_TEMP_0_PIN 5 //changed @ rkoeppl 20110410
#define ORIG_TEMP_1_PIN -1 //changed @ rkoeppl 20110410
#define TEMP_2_PIN -1 //changed @ rkoeppl 20110410
#define HEATER_0_PIN 14 //changed @ rkoeppl 20110410
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define ORIG_TEMP_2_PIN -1 //changed @ rkoeppl 20110410
#define ORIG_HEATER_0_PIN 14 //changed @ rkoeppl 20110410
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#if MOTHERBOARD == 5
#define HEATER_BED_PIN -1 //changed @ rkoeppl 20110410
#define TEMP_BED_PIN -1 //changed @ rkoeppl 20110410
#define ORIG_HEATER_BED_PIN -1 //changed @ rkoeppl 20110410
#define ORIG_TEMP_BED_PIN -1 //changed @ rkoeppl 20110410
#else
#define HEATER_BED_PIN 1 //changed @ rkoeppl 20110410
#define TEMP_BED_PIN 0 //changed @ rkoeppl 20110410
#define ORIG_HEATER_BED_PIN 1 //changed @ rkoeppl 20110410
#define ORIG_TEMP_BED_PIN 0 //changed @ rkoeppl 20110410
#endif
#define SDPOWER -1
#define SDSS 17
......@@ -2529,20 +2529,20 @@
// Note that on the Due pin A0 on the board is channel 2 on the ARM chip
#define HEATER_BED_PIN 69 // PA0
#define HEATER_0_PIN 68 // PA1
#define ORIG_HEATER_BED_PIN 69 // PA0
#define ORIG_HEATER_0_PIN 68 // PA1
/*
#define HEATER_1_PIN 8 // PC22 on piggy
#define HEATER_2_PIN 9 // PC21 on piggy
#define HEATER_3_PIN 97 // PC20 on piggy
#define ORIG_HEATER_1_PIN 8 // PC22 on piggy
#define ORIG_HEATER_2_PIN 9 // PC21 on piggy
#define ORIG_HEATER_3_PIN 97 // PC20 on piggy
*/
#define TEMP_BED_PIN 0 // PA16
#define TEMP_0_PIN 1 // PA24, analog pin
#define ORIG_TEMP_BED_PIN 0 // PA16
#define ORIG_TEMP_0_PIN 1 // PA24, analog pin
/*
#define TEMP_1_PIN 5 // PA23 analog pin on piggy
#define TEMP_2_PIN 4 // PA22, analog pin on piggy
#define TEMP_3_PIN 3 // PA6, analog on piggy
#define ORIG_TEMP_1_PIN 5 // PA23 analog pin on piggy
#define ORIG_TEMP_2_PIN 4 // PA22, analog pin on piggy
#define ORIG_TEMP_3_PIN 3 // PA6, analog on piggy
*/
#define LED_RED_PIN 40 // PC8
......@@ -2695,13 +2695,13 @@
#define PS_ON_PIN -1
#define KILL_PIN -1
#define HEATER_0_PIN 13 // (extruder)
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define ORIG_HEATER_0_PIN 13 // (extruder)
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#ifdef SANGUINOLOLU_V_1_2
#define HEATER_BED_PIN 12 // (bed)
#define ORIG_HEATER_BED_PIN 12 // (bed)
#define ORIG_X_ENABLE_PIN 14
#define ORIG_Y_ENABLE_PIN 14
#define ORIG_Z_ENABLE_PIN 26
......@@ -2713,7 +2713,7 @@
#else
#define HEATER_BED_PIN 14 // (bed)
#define ORIG_HEATER_BED_PIN 14 // (bed)
#define ORIG_X_ENABLE_PIN -1
#define ORIG_Y_ENABLE_PIN -1
#define ORIG_Z_ENABLE_PIN -1
......@@ -2721,10 +2721,10 @@
#endif
#define TEMP_0_PIN 7 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 33 extruder)
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
#define TEMP_BED_PIN 6 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed)
#define ORIG_TEMP_0_PIN 7 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 33 extruder)
#define ORIG_TEMP_1_PIN -1
#define ORIG_TEMP_2_PIN -1
#define ORIG_TEMP_BED_PIN 6 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed)
#define SDPOWER -1
#define SDSS 31
......@@ -2868,18 +2868,18 @@
#define KILL_PIN -1
#endif
#define HEATER_0_PIN 10 // HOTEND 1
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define HEATER_3_PIN -1
#define ORIG_HEATER_0_PIN 10 // HOTEND 1
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_HEATER_3_PIN -1
#define TEMP_0_PIN 13 // ANALOG NUMBERING
#define TEMP_1_PIN 15 // ANALOG NUMBERING
#define TEMP_2_PIN -1 // ANALOG NUMBERING
#define ORIG_TEMP_0_PIN 13 // ANALOG NUMBERING
#define ORIG_TEMP_1_PIN 15 // ANALOG NUMBERING
#define ORIG_TEMP_2_PIN -1 // ANALOG NUMBERING
#define HEATER_BED_PIN 8 // BED
#define ORIG_HEATER_BED_PIN 8 // BED
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
#define ORIG_TEMP_BED_PIN 14 // ANALOG NUMBERING
#if NUM_SERVOS > 0
#define SERVO0_PIN 11
......@@ -3070,22 +3070,22 @@
#define KILL_PIN -1
#endif
#define HEATER_0_PIN 10 // HOTEND 1
#define HEATER_1_PIN 9 // HOTEND 2
#define HEATER_2_PIN 16 // HOTEND 3
#define HEATER_3_PIN 17 // HOTEND 4
#define ORIG_HEATER_0_PIN 10 // HOTEND 1
#define ORIG_HEATER_1_PIN 9 // HOTEND 2
#define ORIG_HEATER_2_PIN 16 // HOTEND 3
#define ORIG_HEATER_3_PIN 17 // HOTEND 4
#define TEMP_0_PIN 13 // ANALOG NUMBERING
#define TEMP_1_PIN 15 // ANALOG NUMBERING
#define TEMP_2_PIN 12 // ANALOG NUMBERING
#define TEMP_3_PIN 11 // ANALOG NUMBERING
#define ORIG_TEMP_0_PIN 13 // ANALOG NUMBERING
#define ORIG_TEMP_1_PIN 15 // ANALOG NUMBERING
#define ORIG_TEMP_2_PIN 12 // ANALOG NUMBERING
#define ORIG_TEMP_3_PIN 11 // ANALOG NUMBERING
#define TC1 4 // ANALOG NUMBERING Thermo couple on Azteeg X3Pro
#define TC2 5 // ANALOG NUMBERING Thermo couple on Azteeg X3Pro
#define HEATER_BED_PIN 8 // BED
#define ORIG_HEATER_BED_PIN 8 // BED
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
#define ORIG_TEMP_BED_PIN 14 // ANALOG NUMBERING
#ifdef NUM_SERVOS
#define SERVO0_PIN 47
......@@ -3250,17 +3250,17 @@
#define Z_MAX_PIN 32
#define ORIG_Z_ENABLE_PIN 35
#define HEATER_BED_PIN 4
#define TEMP_BED_PIN 10
#define ORIG_HEATER_BED_PIN 4
#define ORIG_TEMP_BED_PIN 10
#define HEATER_0_PIN 2
#define TEMP_0_PIN 8
#define ORIG_HEATER_0_PIN 2
#define ORIG_TEMP_0_PIN 8
#define HEATER_1_PIN 3
#define TEMP_1_PIN 9
#define ORIG_HEATER_1_PIN 3
#define ORIG_TEMP_1_PIN 9
#define HEATER_2_PIN -1
#define TEMP_2_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_TEMP_2_PIN -1
#define ORIG_E0_STEP_PIN 43
#define ORIG_E0_DIR_PIN 45
......@@ -3373,21 +3373,21 @@
#define PS_ON_PIN 12
#define KILL_PIN -1
#define HEATER_0_PIN 9 // EXTRUDER 1
#define HEATER_1_PIN 8 // EXTRUDER 2 (FAN On Sprinter)
#define HEATER_2_PIN -1
#define ORIG_HEATER_0_PIN 9 // EXTRUDER 1
#define ORIG_HEATER_1_PIN 8 // EXTRUDER 2 (FAN On Sprinter)
#define ORIG_HEATER_2_PIN -1
#if TEMP_SENSOR_0 == -1
#define TEMP_0_PIN 8 // ANALOG NUMBERING
#define ORIG_TEMP_0_PIN 8 // ANALOG NUMBERING
#else
#define TEMP_0_PIN 13 // ANALOG NUMBERING
#define ORIG_TEMP_0_PIN 13 // ANALOG NUMBERING
#endif
#define TEMP_1_PIN 15 // ANALOG NUMBERING
#define TEMP_2_PIN -1 // ANALOG NUMBERING
#define HEATER_BED_PIN 10 // BED
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
#define ORIG_TEMP_1_PIN 15 // ANALOG NUMBERING
#define ORIG_TEMP_2_PIN -1 // ANALOG NUMBERING
#define ORIG_HEATER_BED_PIN 10 // BED
#define ORIG_TEMP_BED_PIN 14 // ANALOG NUMBERING
#define BEEPER_PIN 33 // Beeper on AUX-4
......@@ -3476,9 +3476,9 @@
#define PS_ON_PIN 12
#define KILL_PIN -1
#define HEATER_0_PIN 9 // EXTRUDER 1
#define HEATER_1_PIN 8 // EXTRUDER 2
#define HEATER_2_PIN -1
#define ORIG_HEATER_0_PIN 9 // EXTRUDER 1
#define ORIG_HEATER_1_PIN 8 // EXTRUDER 2
#define ORIG_HEATER_2_PIN -1
#define SHIFT_CLK 63
#define SHIFT_LD 42
......@@ -3486,26 +3486,26 @@
#define SHIFT_EN 17
#if TEMP_SENSOR_0 == -1
#define TEMP_0_PIN 4 // ANALOG NUMBERING
#define ORIG_TEMP_0_PIN 4 // ANALOG NUMBERING
#else
#define TEMP_0_PIN 13 // ANALOG NUMBERING
#define ORIG_TEMP_0_PIN 13 // ANALOG NUMBERING
#endif
#if TEMP_SENSOR_1 == -1
#define TEMP_1_PIN 8 // ANALOG NUMBERING
#define ORIG_TEMP_1_PIN 8 // ANALOG NUMBERING
#else
#define TEMP_1_PIN 15 // ANALOG NUMBERING
#define ORIG_TEMP_1_PIN 15 // ANALOG NUMBERING
#endif
#define TEMP_2_PIN -1 // ANALOG NUMBERING
#define ORIG_TEMP_2_PIN -1 // ANALOG NUMBERING
#define HEATER_BED_PIN 10 // BED
#define ORIG_HEATER_BED_PIN 10 // BED
#if TEMP_SENSOR_BED == -1
#define TEMP_BED_PIN 8 // ANALOG NUMBERING
#define ORIG_TEMP_BED_PIN 8 // ANALOG NUMBERING
#else
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
#define ORIG_TEMP_BED_PIN 14 // ANALOG NUMBERING
#endif
#define BEEPER_PIN 64
......@@ -3590,20 +3590,20 @@
#define PS_ON_PIN -1
#define KILL_PIN -1
#define HEATER_0_PIN 7 // EXTRUDER 1
#define HEATER_1_PIN 8 // EXTRUDER 2
#define HEATER_2_PIN 9 // thermo couple
#define ORIG_HEATER_0_PIN 7 // EXTRUDER 1
#define ORIG_HEATER_1_PIN 8 // EXTRUDER 2
#define ORIG_HEATER_2_PIN 9 // thermo couple
#if TEMP_SENSOR_0 == -1
#define TEMP_0_PIN 5 // ANALOG NUMBERING
#define ORIG_TEMP_0_PIN 5 // ANALOG NUMBERING
#else
#define TEMP_0_PIN 7 // ANALOG NUMBERING
#define ORIG_TEMP_0_PIN 7 // ANALOG NUMBERING
#endif
#define TEMP_1_PIN 6 // ANALOG NUMBERING
#define TEMP_2_PIN -1 // ANALOG NUMBERING
#define ORIG_TEMP_1_PIN 6 // ANALOG NUMBERING
#define ORIG_TEMP_2_PIN -1 // ANALOG NUMBERING
#define HEATER_BED_PIN 3 // BED
#define TEMP_BED_PIN 6 // ANALOG NUMBERING
#define ORIG_HEATER_BED_PIN 3 // BED
#define ORIG_TEMP_BED_PIN 6 // ANALOG NUMBERING
#define BEEPER_PIN -1
......@@ -3700,35 +3700,35 @@
#define PS_ON_PIN 12
#define KILL_PIN -1
#define HEATER_0_PIN 2
#define HEATER_1_PIN 8
#define HEATER_2_PIN 9
#define HEATER_BED_PIN 10
#define ORIG_HEATER_0_PIN 2
#define ORIG_HEATER_1_PIN 8
#define ORIG_HEATER_2_PIN 9
#define ORIG_HEATER_BED_PIN 10
#define ORIG_FAN_PIN 6
#define FAN2_PIN 7
#if TEMP_SENSOR_0 == -1
#define TEMP_0_PIN 11 // ANALOG NUMBERING
#define ORIG_TEMP_0_PIN 11 // ANALOG NUMBERING
#else
#define TEMP_0_PIN 15 // ANALOG NUMBERING
#define ORIG_TEMP_0_PIN 15 // ANALOG NUMBERING
#endif
#if TEMP_SENSOR_1 == -1
#define TEMP_1_PIN 10 // ANALOG NUMBERING
#define ORIG_TEMP_1_PIN 10 // ANALOG NUMBERING
#else
#define TEMP_1_PIN 13 // ANALOG NUMBERING
#define ORIG_TEMP_1_PIN 13 // ANALOG NUMBERING
#endif
#if TEMP_SENSOR_2 == -1
#define TEMP_2_PIN 9 // ANALOG NUMBERING
#define ORIG_TEMP_2_PIN 9 // ANALOG NUMBERING
#else
#define TEMP_2_PIN 12 // ANALOG NUMBERING
#define ORIG_TEMP_2_PIN 12 // ANALOG NUMBERING
#endif
#if TEMP_SENSOR_BED == -1
#define TEMP_BED_PIN 8 // ANALOG NUMBERING
#define ORIG_TEMP_BED_PIN 8 // ANALOG NUMBERING
#else
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
#define ORIG_TEMP_BED_PIN 14 // ANALOG NUMBERING
#endif
#define BEEPER_PIN 61
......@@ -3795,17 +3795,17 @@
#define Z_MAX_PIN 18
#define ORIG_Z_ENABLE_PIN 35
#define HEATER_BED_PIN -1
#define TEMP_BED_PIN -1
#define ORIG_HEATER_BED_PIN -1
#define ORIG_TEMP_BED_PIN -1
#define HEATER_0_PIN 2
#define TEMP_0_PIN 8
#define ORIG_HEATER_0_PIN 2
#define ORIG_TEMP_0_PIN 8
#define HEATER_1_PIN 1
#define TEMP_1_PIN 1
#define ORIG_HEATER_1_PIN 1
#define ORIG_TEMP_1_PIN 1
#define HEATER_2_PIN -1
#define TEMP_2_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_TEMP_2_PIN -1
#define ORIG_E0_STEP_PIN 43
#define ORIG_E0_DIR_PIN 45
......@@ -3862,17 +3862,17 @@
#define Z_STOP_PIN 29
#define ORIG_Z_ENABLE_PIN 34
#define HEATER_BED_PIN 4
#define TEMP_BED_PIN 10
#define ORIG_HEATER_BED_PIN 4
#define ORIG_TEMP_BED_PIN 10
#define HEATER_0_PIN 2
#define TEMP_0_PIN 8
#define ORIG_HEATER_0_PIN 2
#define ORIG_TEMP_0_PIN 8
#define HEATER_1_PIN 3
#define TEMP_1_PIN 9
#define ORIG_HEATER_1_PIN 3
#define ORIG_TEMP_1_PIN 9
#define HEATER_2_PIN -1
#define TEMP_2_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_TEMP_2_PIN -1
#define ORIG_E0_STEP_PIN 42
#define ORIG_E0_DIR_PIN 43
......@@ -3988,18 +3988,18 @@
#define KILL_PIN -1
#endif
#define HEATER_0_PIN 10 // HOTEND 1
#define HEATER_1_PIN 12 // HOTEND 2
#define HEATER_2_PIN 6 // HOTEND 3
#define HEATER_3_PIN -1
#define ORIG_HEATER_0_PIN 10 // HOTEND 1
#define ORIG_HEATER_1_PIN 12 // HOTEND 2
#define ORIG_HEATER_2_PIN 6 // HOTEND 3
#define ORIG_HEATER_3_PIN -1
#define TEMP_0_PIN 13 // ANALOG NUMBERING
#define TEMP_1_PIN 15 // ANALOG NUMBERING
#define TEMP_2_PIN -1 // ANALOG NUMBERING
#define ORIG_TEMP_0_PIN 13 // ANALOG NUMBERING
#define ORIG_TEMP_1_PIN 15 // ANALOG NUMBERING
#define ORIG_TEMP_2_PIN -1 // ANALOG NUMBERING
#define HEATER_BED_PIN 9 // NO BED
#define ORIG_HEATER_BED_PIN 9 // NO BED
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
#define ORIG_TEMP_BED_PIN 14 // ANALOG NUMBERING
#if NUM_SERVOS > 0
#define SERVO0_PIN 11
......@@ -4114,18 +4114,18 @@
#define KILL_PIN -1
#endif
#define HEATER_0_PIN 10 // HOTEND 1
#define HEATER_1_PIN 12 // HOTEND 2
#define HEATER_2_PIN 6 // HOTEND 3
#define HEATER_3_PIN -1
#define ORIG_HEATER_0_PIN 10 // HOTEND 1
#define ORIG_HEATER_1_PIN 12 // HOTEND 2
#define ORIG_HEATER_2_PIN 6 // HOTEND 3
#define ORIG_HEATER_3_PIN -1
#define TEMP_0_PIN 13 // ANALOG NUMBERING
#define TEMP_1_PIN 15 // ANALOG NUMBERING
#define TEMP_2_PIN -1 // ANALOG NUMBERING
#define ORIG_TEMP_0_PIN 13 // ANALOG NUMBERING
#define ORIG_TEMP_1_PIN 15 // ANALOG NUMBERING
#define ORIG_TEMP_2_PIN -1 // ANALOG NUMBERING
#define HEATER_BED_PIN 9 // NO BED
#define ORIG_HEATER_BED_PIN 9 // NO BED
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
#define ORIG_TEMP_BED_PIN 14 // ANALOG NUMBERING
#if NUM_SERVOS > 0
#define SERVO0_PIN 11
......@@ -4215,10 +4215,10 @@
#define ORIG_E0_DIR_PIN 7
#define ORIG_E0_ENABLE_PIN 19
#define HEATER_0_PIN 21 // Extruder
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define HEATER_BED_PIN 20 // Bed
#define ORIG_HEATER_0_PIN 21 // Extruder
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_HEATER_BED_PIN 20 // Bed
#define ORIG_FAN_PIN 22 // Fan
// You may need to change ORIG_FAN_PIN to 16 because Marlin isn't using fastio.h
// for the fan and Teensyduino uses a different pin mapping.
......@@ -4227,18 +4227,18 @@
#define X_STOP_PIN 13
#define Y_STOP_PIN 14
#define Z_STOP_PIN 15
#define TEMP_0_PIN 7 // Extruder / Analog pin numbering
#define TEMP_BED_PIN 6 // Bed / Analog pin numbering
#define ORIG_TEMP_0_PIN 7 // Extruder / Analog pin numbering
#define ORIG_TEMP_BED_PIN 6 // Bed / Analog pin numbering
#else // Printrboard
#define X_STOP_PIN 35
#define Y_STOP_PIN 8
#define Z_STOP_PIN 36
#define TEMP_0_PIN 1 // Extruder / Analog pin numbering
#define TEMP_BED_PIN 0 // Bed / Analog pin numbering
#define ORIG_TEMP_0_PIN 1 // Extruder / Analog pin numbering
#define ORIG_TEMP_BED_PIN 0 // Bed / Analog pin numbering
#endif
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
#define ORIG_TEMP_1_PIN -1
#define ORIG_TEMP_2_PIN -1
#define SDPOWER -1
#define SDSS 8
......@@ -4319,53 +4319,53 @@
#define KILL_PIN 46
#if (TEMP_SENSOR_0==0)
#define TEMP_0_PIN -1
#define HEATER_0_PIN -1
#define ORIG_TEMP_0_PIN -1
#define ORIG_HEATER_0_PIN -1
#else
#define HEATER_0_PIN 2 // EXTRUDER 1
#define ORIG_HEATER_0_PIN 2 // EXTRUDER 1
#if (TEMP_SENSOR_0==-1)
#define TEMP_0_PIN 6 // ANALOG NUMBERING - connector *K1* on RUMBA thermocouple ADD ON is used
#define ORIG_TEMP_0_PIN 6 // ANALOG NUMBERING - connector *K1* on RUMBA thermocouple ADD ON is used
#else
#define TEMP_0_PIN 15 // ANALOG NUMBERING - default connector for thermistor *T0* on rumba board is used
#define ORIG_TEMP_0_PIN 15 // ANALOG NUMBERING - default connector for thermistor *T0* on rumba board is used
#endif
#endif
#if (TEMP_SENSOR_1==0)
#define TEMP_1_PIN -1
#define HEATER_1_PIN -1
#define ORIG_TEMP_1_PIN -1
#define ORIG_HEATER_1_PIN -1
#else
#define HEATER_1_PIN 3 // EXTRUDER 2
#define ORIG_HEATER_1_PIN 3 // EXTRUDER 2
#if (TEMP_SENSOR_1==-1)
#define TEMP_1_PIN 5 // ANALOG NUMBERING - connector *K2* on RUMBA thermocouple ADD ON is used
#define ORIG_TEMP_1_PIN 5 // ANALOG NUMBERING - connector *K2* on RUMBA thermocouple ADD ON is used
#else
#define TEMP_1_PIN 14 // ANALOG NUMBERING - default connector for thermistor *T1* on rumba board is used
#define ORIG_TEMP_1_PIN 14 // ANALOG NUMBERING - default connector for thermistor *T1* on rumba board is used
#endif
#endif
#if (TEMP_SENSOR_2==0)
#define TEMP_2_PIN -1
#define HEATER_2_PIN -1
#define ORIG_TEMP_2_PIN -1
#define ORIG_HEATER_2_PIN -1
#else
#define HEATER_2_PIN 6 // EXTRUDER 3
#define ORIG_HEATER_2_PIN 6 // EXTRUDER 3
#if (TEMP_SENSOR_2==-1)
#define TEMP_2_PIN 7 // ANALOG NUMBERING - connector *K3* on RUMBA thermocouple ADD ON is used <-- this can not be used when TEMP_SENSOR_BED is defined as thermocouple
#define ORIG_TEMP_2_PIN 7 // ANALOG NUMBERING - connector *K3* on RUMBA thermocouple ADD ON is used <-- this can not be used when TEMP_SENSOR_BED is defined as thermocouple
#else
#define TEMP_2_PIN 13 // ANALOG NUMBERING - default connector for thermistor *T2* on rumba board is used
#define ORIG_TEMP_2_PIN 13 // ANALOG NUMBERING - default connector for thermistor *T2* on rumba board is used
#endif
#endif
//optional for extruder 4 or chamber: #define TEMP_X_PIN 12 // ANALOG NUMBERING - default connector for thermistor *T3* on rumba board is used
//optional FAN1 can be used as 4th heater output: #define HEATER_3_PIN 8 // EXTRUDER 4
//optional FAN1 can be used as 4th heater output: #define ORIG_HEATER_3_PIN 8 // EXTRUDER 4
#if (TEMP_SENSOR_BED==0)
#define TEMP_BED_PIN -1
#define HEATER_BED_PIN -1
#define ORIG_TEMP_BED_PIN -1
#define ORIG_HEATER_BED_PIN -1
#else
#define HEATER_BED_PIN 9 // BED
#define ORIG_HEATER_BED_PIN 9 // BED
#if (TEMP_SENSOR_BED==-1)
#define TEMP_BED_PIN 7 // ANALOG NUMBERING - connector *K3* on RUMBA thermocouple ADD ON is used <-- this can not be used when TEMP_SENSOR_2 is defined as thermocouple
#define ORIG_TEMP_BED_PIN 7 // ANALOG NUMBERING - connector *K3* on RUMBA thermocouple ADD ON is used <-- this can not be used when TEMP_SENSOR_2 is defined as thermocouple
#else
#define TEMP_BED_PIN 11 // ANALOG NUMBERING - default connector for thermistor *THB* on rumba board is used
#define ORIG_TEMP_BED_PIN 11 // ANALOG NUMBERING - default connector for thermistor *THB* on rumba board is used
#endif
#endif
......@@ -4428,16 +4428,16 @@
#define ORIG_E0_ENABLE_PIN 22
#define E0_ATT_PIN 20
#define HEATER_0_PIN 4 // Extruder
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define HEATER_BED_PIN 38 // Bed
#define ORIG_HEATER_0_PIN 4 // Extruder
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_HEATER_BED_PIN 38 // Bed
#define ORIG_FAN_PIN 3 // Fan
#define TEMP_0_PIN 7 // Extruder / Analog pin numbering
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
#define TEMP_BED_PIN 6 // Bed / Analog pin numbering
#define ORIG_TEMP_0_PIN 7 // Extruder / Analog pin numbering
#define ORIG_TEMP_1_PIN -1
#define ORIG_TEMP_2_PIN -1
#define ORIG_TEMP_BED_PIN 6 // Bed / Analog pin numbering
#define SDPOWER -1
#define SDSS -1
......@@ -4493,10 +4493,10 @@
#define ORIG_E0_DIR_PIN 7
#define ORIG_E0_ENABLE_PIN 19
#define HEATER_0_PIN 21 // Extruder
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define HEATER_BED_PIN 20 // Bed
#define ORIG_HEATER_0_PIN 21 // Extruder
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_HEATER_BED_PIN 20 // Bed
#define ORIG_FAN_PIN 16 // Fan -- from Teensyduino environment.
// For the fan and Teensyduino uses a different pin mapping.
#define X_STOP_PIN 13
......@@ -4504,11 +4504,11 @@
#define Z_STOP_PIN 15
//#define Z_STOP_PIN 36 // For inductive sensor.
#define TEMP_0_PIN 7 // Extruder / Analog pin numbering
#define TEMP_BED_PIN 6 // Bed / Analog pin numbering
#define ORIG_TEMP_0_PIN 7 // Extruder / Analog pin numbering
#define ORIG_TEMP_BED_PIN 6 // Bed / Analog pin numbering
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
#define ORIG_TEMP_1_PIN -1
#define ORIG_TEMP_2_PIN -1
#define SDPOWER -1
#define SDSS 20 // PB0 - 8 in marlin env.
......@@ -4635,20 +4635,20 @@ DaveX plan for Teensylu/printrboard-type pinouts (ref teensylu & sprinter) for a
#define ORIG_E0_DIR_PIN 35 // 7
#define ORIG_E0_ENABLE_PIN 26 // Shared w/x
#define HEATER_0_PIN 15 // 21 // Extruder
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define HEATER_BED_PIN 14 // 20 // Bed
#define ORIG_HEATER_0_PIN 15 // 21 // Extruder
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_HEATER_BED_PIN 14 // 20 // Bed
#define ORIG_FAN_PIN 16 // 22 // Fan
#define X_STOP_PIN 2
#define Y_STOP_PIN 3
#define Z_STOP_PIN 4
#define TEMP_0_PIN 7 // Extruder / Analog pin numbering
#define TEMP_BED_PIN 6 // Bed / Analog pin numbering
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
#define ORIG_TEMP_0_PIN 7 // Extruder / Analog pin numbering
#define ORIG_TEMP_BED_PIN 6 // Bed / Analog pin numbering
#define ORIG_TEMP_1_PIN -1
#define ORIG_TEMP_2_PIN -1
#define SDPOWER -1
#define SD_DETECT_PIN -1
......@@ -4719,19 +4719,19 @@ DaveX plan for Teensylu/printrboard-type pinouts (ref teensylu & sprinter) for a
#define ORIG_E0_DIR_PIN 7
#define ORIG_E0_ENABLE_PIN 17
#define HEATER_0_PIN 21 // Extruder
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define HEATER_BED_PIN 20 // Bed
#define ORIG_HEATER_0_PIN 21 // Extruder
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_HEATER_BED_PIN 20 // Bed
// You may need to change ORIG_FAN_PIN to 16 because Marlin isn't using fastio.h
// for the fan and Teensyduino uses a different pin mapping.
#define ORIG_FAN_PIN 16 // Fan
#define TEMP_0_PIN 1 // Extruder / Analog pin numbering
#define TEMP_BED_PIN 0 // Bed / Analog pin numbering
#define ORIG_TEMP_0_PIN 1 // Extruder / Analog pin numbering
#define ORIG_TEMP_BED_PIN 0 // Bed / Analog pin numbering
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
#define ORIG_TEMP_1_PIN -1
#define ORIG_TEMP_2_PIN -1
#define SDPOWER -1
#define LED_PIN -1
......@@ -4802,21 +4802,21 @@ DaveX plan for Teensylu/printrboard-type pinouts (ref teensylu & sprinter) for a
#define PS_ON_PIN 14
#define KILL_PIN -1
#define HEATER_0_PIN 12 // (extruder)
#define ORIG_HEATER_0_PIN 12 // (extruder)
#define HEATER_BED_PIN 16 // (bed)
#define ORIG_HEATER_BED_PIN 16 // (bed)
#define ORIG_X_ENABLE_PIN 19
#define ORIG_Y_ENABLE_PIN 24
#define ORIG_Z_ENABLE_PIN 29
#define ORIG_E0_ENABLE_PIN 13
#define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 33 extruder)
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
#define TEMP_BED_PIN 5 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed)
#define ORIG_TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 33 extruder)
#define ORIG_TEMP_1_PIN -1
#define ORIG_TEMP_2_PIN -1
#define ORIG_TEMP_BED_PIN 5 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed)
#define SDPOWER -1
#define SDSS 4
#define HEATER_2_PIN -1
#define ORIG_HEATER_2_PIN -1
#endif // GEN3_PLUS
/****************************************************************************************/
......@@ -4897,14 +4897,14 @@ DaveX plan for Teensylu/printrboard-type pinouts (ref teensylu & sprinter) for a
#define PS_ON_PIN -1
#define KILL_PIN -1
#define HEATER_0_PIN 4
#define HEATER_1_PIN -1 // 12
#define HEATER_2_PIN -1 // 13
#define TEMP_0_PIN 0 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define TEMP_1_PIN -1 // 1
#define TEMP_2_PIN -1 // 2
#define HEATER_BED_PIN -1 // 14/15
#define TEMP_BED_PIN -1 // 1,2 or I2C
#define ORIG_HEATER_0_PIN 4
#define ORIG_HEATER_1_PIN -1 // 12
#define ORIG_HEATER_2_PIN -1 // 13
#define ORIG_TEMP_0_PIN 0 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define ORIG_TEMP_1_PIN -1 // 1
#define ORIG_TEMP_2_PIN -1 // 2
#define ORIG_HEATER_BED_PIN -1 // 14/15
#define ORIG_TEMP_BED_PIN -1 // 1,2 or I2C
/* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */
#endif // OMCA_A
......@@ -4959,16 +4959,14 @@ DaveX plan for Teensylu/printrboard-type pinouts (ref teensylu & sprinter) for a
#define PS_ON_PIN -1
#define KILL_PIN -1
#define HEATER_0_PIN 3 /*DONE PWM on RIGHT connector */
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define TEMP_0_PIN 0 // ANALOG INPUT NUMBERING
#define TEMP_1_PIN 1 // ANALOG
#define TEMP_2_PIN -1 // 2
#define HEATER_BED_PIN 4
#define TEMP_BED_PIN 2 // 1,2 or I2C
#define ORIG_HEATER_0_PIN 3 /*DONE PWM on RIGHT connector */
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_TEMP_0_PIN 0 // ANALOG INPUT NUMBERING
#define ORIG_TEMP_1_PIN 1 // ANALOG
#define ORIG_TEMP_2_PIN -1 // 2
#define ORIG_HEATER_BED_PIN 4
#define ORIG_TEMP_BED_PIN 2 // 1,2 or I2C
#define I2C_SCL 16
#define I2C_SDA 17
......@@ -5035,14 +5033,14 @@ DaveX plan for Teensylu/printrboard-type pinouts (ref teensylu & sprinter) for a
#define SOL1_PIN 16
#define SOL2_PIN 17
#define HEATER_0_PIN 9
#define HEATER_1_PIN 8 // 12
#define HEATER_2_PIN 11 //-1 // 13
#define TEMP_0_PIN 13 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define TEMP_1_PIN 15 // 1
#define TEMP_2_PIN -1 // 2
#define HEATER_BED_PIN 10 // 14/15
#define TEMP_BED_PIN 14 // 1,2 or I2C
#define ORIG_HEATER_0_PIN 9
#define ORIG_HEATER_1_PIN 8 // 12
#define ORIG_HEATER_2_PIN 11 //-1 // 13
#define ORIG_TEMP_0_PIN 13 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define ORIG_TEMP_1_PIN 15 // 1
#define ORIG_TEMP_2_PIN -1 // 2
#define ORIG_HEATER_BED_PIN 10 // 14/15
#define ORIG_TEMP_BED_PIN 14 // 1,2 or I2C
/* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */
#endif // LEAPFROG
......@@ -5084,14 +5082,14 @@ DaveX plan for Teensylu/printrboard-type pinouts (ref teensylu & sprinter) for a
#define PS_ON_PIN 9
#define KILL_PIN -1
#define HEATER_0_PIN 13
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define TEMP_0_PIN 6 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define TEMP_1_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define TEMP_2_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define HEATER_BED_PIN 4
#define TEMP_BED_PIN 10
#define ORIG_HEATER_0_PIN 13
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_TEMP_0_PIN 6 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define ORIG_TEMP_1_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define ORIG_TEMP_2_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define ORIG_HEATER_BED_PIN 4
#define ORIG_TEMP_BED_PIN 10
#endif // 99
/****************************************************************************************/
......@@ -5138,23 +5136,23 @@ DaveX plan for Teensylu/printrboard-type pinouts (ref teensylu & sprinter) for a
#error Unknown MOTHERBOARD value in configuration.h
#endif
#ifndef HEATER_1_PIN
#define HEATER_1_PIN -1
#ifndef ORIG_HEATER_1_PIN
#define ORIG_HEATER_1_PIN -1
#endif
#ifndef TEMP_1_PIN
#define TEMP_1_PIN -1
#ifndef ORIG_TEMP_1_PIN
#define ORIG_TEMP_1_PIN -1
#endif
#ifndef HEATER_2_PIN
#define HEATER_2_PIN -1
#ifndef ORIG_HEATER_2_PIN
#define ORIG_HEATER_2_PIN -1
#endif
#ifndef TEMP_2_PIN
#define TEMP_2_PIN -1
#ifndef ORIG_TEMP_2_PIN
#define ORIG_TEMP_2_PIN -1
#endif
#ifndef HEATER_3_PIN
#define HEATER_3_PIN -1
#ifndef ORIG_HEATER_3_PIN
#define ORIG_HEATER_3_PIN -1
#endif
#ifndef TEMP_3_PIN
#define TEMP_3_PIN -1
#ifndef ORIG_TEMP_3_PIN
#define ORIG_TEMP_3_PIN -1
#endif
#ifdef X_STOP_PIN
......@@ -5246,32 +5244,32 @@ DaveX plan for Teensylu/printrboard-type pinouts (ref teensylu & sprinter) for a
****************************************************************************************/
#if HOTENDS == 1
#undef HEATER_1_PIN
#undef HEATER_2_PIN
#undef HEATER_3_PIN
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define HEATER_3_PIN -1
#undef TEMP_1_PIN
#undef TEMP_2_PIN
#undef TEMP_3_PIN
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
#define TEMP_3_PIN -1
#undef ORIG_HEATER_1_PIN
#undef ORIG_HEATER_2_PIN
#undef ORIG_HEATER_3_PIN
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_HEATER_3_PIN -1
#undef ORIG_TEMP_1_PIN
#undef ORIG_TEMP_2_PIN
#undef ORIG_TEMP_3_PIN
#define ORIG_TEMP_1_PIN -1
#define ORIG_TEMP_2_PIN -1
#define ORIG_TEMP_3_PIN -1
#elif HOTENDS == 2
#undef HEATER_2_PIN
#undef HEATER_3_PIN
#define HEATER_2_PIN -1
#define HEATER_3_PIN -1
#undef TEMP_2_PIN
#undef TEMP_3_PIN
#define TEMP_2_PIN -1
#define TEMP_3_PIN -1
#undef ORIG_HEATER_2_PIN
#undef ORIG_HEATER_3_PIN
#define ORIG_HEATER_2_PIN -1
#define ORIG_HEATER_3_PIN -1
#undef ORIG_TEMP_2_PIN
#undef ORIG_TEMP_3_PIN
#define ORIG_TEMP_2_PIN -1
#define ORIG_TEMP_3_PIN -1
#elif HOTENDS == 3
#undef HEATER_3_PIN
#define HEATER_3_PIN -1
#undef TEMP_3_PIN
#define TEMP_3_PIN -1
#undef ORIG_HEATER_3_PIN
#define ORIG_HEATER_3_PIN -1
#undef ORIG_TEMP_3_PIN
#define ORIG_TEMP_3_PIN -1
#endif
#ifdef MKR4
......
MarlinKimbra/pins2tool.h
View file @ f0c43905
......@@ -42,6 +42,20 @@
#define E3_ENABLE_PIN ORIG_E3_ENABLE_PIN
#endif
//HEATHER pin
#define HEATER_0_PIN ORIG_HEATER_0_PIN
#define HEATER_1_PIN ORIG_HEATER_1_PIN
#define HEATER_2_PIN ORIG_HEATER_2_PIN
#define HEATER_3_PIN ORIG_HEATER_3_PIN
#define HEATER_BED_PIN ORIG_HEATER_BED_PIN
//TEMP pin
#define TEMP_0_PIN ORIG_TEMP_0_PIN
#define TEMP_1_PIN ORIG_TEMP_1_PIN
#define TEMP_2_PIN ORIG_TEMP_2_PIN
#define TEMP_3_PIN ORIG_TEMP_3_PIN
#define TEMP_BED_PIN ORIG_TEMP_BED_PIN
//FAN pin
#define FAN_PIN ORIG_FAN_PIN
......@@ -50,7 +64,5 @@
// #undef X_MIN_PIN
// #define X_MIN_PIN newpin
#undef Z_PROBE_PIN
#define Z_PROBE_PIN 18
//============================================================================
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment