Commit f004c9cd authored by MagoKimbra's avatar MagoKimbra

Fix 4.2.3

parent 3acc5a42
......@@ -253,24 +253,24 @@
// Enable this to sample the bed in a grid (least squares solution)
// Note: this feature generates 10KB extra code size
//#define AUTO_BED_LEVELING_GRID
#define AUTO_BED_LEVELING_GRID
// yes AUTO_BED_LEVELING_GRID
//#define MIN_PROBE_EDGE 10 // The probe square sides can be no smaller than this
#define MIN_PROBE_EDGE 10 // The probe square sides can be no smaller than this
// Set the number of grid points per dimension
// You probably don't need more than 3 (squared=9)
//#define AUTO_BED_LEVELING_GRID_POINTS 2
#define AUTO_BED_LEVELING_GRID_POINTS 2
// yes AUTO_BED_LEVELING_GRID
// no AUTO_BED_LEVELING_GRID
// Arbitrary points to probe. A simple cross-product
// is used to estimate the plane of the bed.
//#define ABL_PROBE_PT_1_X 15
//#define ABL_PROBE_PT_1_Y 180
//#define ABL_PROBE_PT_2_X 15
//#define ABL_PROBE_PT_2_Y 20
//#define ABL_PROBE_PT_3_X 170
//#define ABL_PROBE_PT_3_Y 20
#define ABL_PROBE_PT_1_X 15
#define ABL_PROBE_PT_1_Y 180
#define ABL_PROBE_PT_2_X 15
#define ABL_PROBE_PT_2_Y 20
#define ABL_PROBE_PT_3_X 170
#define ABL_PROBE_PT_3_Y 20
// no AUTO_BED_LEVELING_GRID
// Offsets to the probe relative to the extruder tip (Hotend - Probe)
......
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment