Version Stable

MarlinKimbra/Configuration_adv.h

@@ -230,7 +230,8 @@
 #define MINIMUM_PLANNER_SPEED 0.05// (mm/sec)
 
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
-#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
+// Alligator Board support 16 or 32 only value
+#define MICROSTEP_MODES {32, 32, 32, 32} // [1,2,4,8,16,32]
 
 // Motor Current setting (Only functional when motor driver current ref pins are connected to a digital trimpot on supported boards)
 #define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)

MarlinKimbra/Marlin_main.cpp

@@ -617,7 +617,7 @@ void setup_powerhold()
     OUT_WRITE(SUICIDE_PIN, HIGH);
   #endif
   #if HAS_POWER_SWITCH
-    #if defined(PS_DEFAULT_OFF)
+    #ifdef PS_DEFAULT_OFF
       OUT_WRITE(PS_ON_PIN, PS_ON_ASLEEP);
     #else
       OUT_WRITE(PS_ON_PIN, PS_ON_AWAKE);

MarlinKimbra/temperature.cpp

@@ -1592,7 +1592,7 @@ ISR(TIMER0_COMPB_vect) {
         #define GE1 >=
       #endif
       if (current_temperature_raw[1] GE1 maxttemp_raw[1]) max_temp_error(1);
-      if (minttemp_raw[1] GE0 current_temperature_raw[1]) min_temp_error(1);
+      if (minttemp_raw[1] GE1 current_temperature_raw[1]) min_temp_error(1);
 
       #if HOTENDS > 2
         #if HEATER_2_RAW_LO_TEMP > HEATER_2_RAW_HI_TEMP
@@ -1601,7 +1601,7 @@ ISR(TIMER0_COMPB_vect) {
           #define GE2 >=
         #endif
         if (current_temperature_raw[2] GE2 maxttemp_raw[2]) max_temp_error(2);
-        if (minttemp_raw[2] GE0 current_temperature_raw[2]) min_temp_error(2);
+        if (minttemp_raw[2] GE2 current_temperature_raw[2]) min_temp_error(2);
 
         #if HOTENDS > 3
           #if HEATER_3_RAW_LO_TEMP > HEATER_3_RAW_HI_TEMP
@@ -1610,7 +1610,7 @@ ISR(TIMER0_COMPB_vect) {
             #define GE3 >=
           #endif
           if (current_temperature_raw[3] GE3 maxttemp_raw[3]) max_temp_error(3);
-          if (minttemp_raw[3] GE0 current_temperature_raw[3]) min_temp_error(3);
+          if (minttemp_raw[3] GE3 current_temperature_raw[3]) min_temp_error(3);
 
         #endif // HOTENDS > 3
       #endif // HOTENDS > 2

MarlinKimbra/ultralcd.h

@@ -109,7 +109,8 @@
 #else //no LCD
   FORCE_INLINE void lcd_update() {}
   FORCE_INLINE void lcd_init() {}
-  FORCE_INLINE void lcd_setstatus(const char* message) {}
+  FORCE_INLINE void lcd_setstatus(const char* message, const bool persist=false) {}
+  FORCE_INLINE void lcd_setstatuspgm(const char* message, const uint8_t level=0) {}
   FORCE_INLINE void lcd_buttons_update() {}
   FORCE_INLINE void lcd_reset_alert_level() {}
   FORCE_INLINE void lcd_buzz(long duration,uint16_t freq) {}