//All these generations of Gen7 supply thermistor power
...
...
@@ -282,8 +282,8 @@
#define ORIG_Z_STEP_PIN 26
#define ORIG_Z_DIR_PIN 25
#define ORIG_Z_ENABLE_PIN 24
#define Z_MIN_PIN 1
#define Z_MAX_PIN 0
#define ORIG_Z_MIN_PIN 1
#define ORIG_Z_MAX_PIN 0
//extruder pins
#define ORIG_E0_STEP_PIN 28
...
...
@@ -413,8 +413,8 @@
#define ORIG_X_ENABLE_PIN 24
//X endstop
#define X_MIN_PIN 3
#define X_MAX_PIN -1
#define ORIG_X_MIN_PIN 3
#define ORIG_X_MAX_PIN -1
//Y motor stepper
#define ORIG_Y_STEP_PIN 35
...
...
@@ -422,8 +422,8 @@
#define ORIG_Y_ENABLE_PIN 31
//Y endstop
#define Y_MIN_PIN 2
#define Y_MAX_PIN -1
#define ORIG_Y_MIN_PIN 2
#define ORIG_Y_MAX_PIN -1
//Z motor stepper
#define ORIG_Z_STEP_PIN 40
...
...
@@ -431,8 +431,8 @@
#define ORIG_Z_ENABLE_PIN 37
//Z endstop
#define Z_MIN_PIN 5
#define Z_MAX_PIN -1
#define ORIG_Z_MIN_PIN 5
#define ORIG_Z_MAX_PIN -1
//Extruder 0 stepper
#define ORIG_E0_STEP_PIN 26
...
...
@@ -523,8 +523,8 @@
#define ORIG_Z_STEP_PIN 26
#define ORIG_Z_DIR_PIN 25
#define ORIG_Z_ENABLE_PIN 24
#define Z_MIN_PIN 1
#define Z_MAX_PIN 0
#define ORIG_Z_MIN_PIN 1
#define ORIG_Z_MAX_PIN 0
//extruder pins
#define ORIG_E0_STEP_PIN 28
...
...
@@ -584,80 +584,80 @@
#endif
#define ORIG_X_STEP_PIN 49
#define ORIG_X_DIR_PIN 13
#define ORIG_X_ENABLE_PIN 48
#define X_MIN_PIN 35
#define X_MAX_PIN -1 //34
#define ORIG_X_STEP_PIN 49
#define ORIG_X_DIR_PIN 13
#define ORIG_X_ENABLE_PIN 48
#define ORIG_X_MIN_PIN 35
#define ORIG_X_MAX_PIN -1 // 34
#define ORIG_Y_STEP_PIN 11
#define ORIG_Y_DIR_PIN 9
#define ORIG_Y_ENABLE_PIN 12
#define Y_MIN_PIN 33
#define Y_MAX_PIN -1 //32
#define ORIG_Y_STEP_PIN 11
#define ORIG_Y_DIR_PIN 9
#define ORIG_Y_ENABLE_PIN 12
#define ORIG_Y_MIN_PIN 33
#define ORIG_Y_MAX_PIN -1 // 32
#define ORIG_Z_STEP_PIN 7
#define ORIG_Z_DIR_PIN 6
#define ORIG_Z_ENABLE_PIN 8
#define Z_MIN_PIN 31
#define Z_MAX_PIN -1 //30
#define ORIG_Z_STEP_PIN 7
#define ORIG_Z_DIR_PIN 6
#define ORIG_Z_ENABLE_PIN 8
#define ORIG_Z_MIN_PIN 31
#define ORIG_Z_MAX_PIN -1 // 30
#define ORIG_E2_STEP_PIN 43
#define ORIG_E2_DIR_PIN 47
#define ORIG_E2_ENABLE_PIN 42
#define ORIG_E2_STEP_PIN 43
#define ORIG_E2_DIR_PIN 47
#define ORIG_E2_ENABLE_PIN 42
#define ORIG_E1_STEP_PIN 18
#define ORIG_E1_DIR_PIN 19
#define ORIG_E1_ENABLE_PIN 38
#define ORIG_E1_STEP_PIN 18
#define ORIG_E1_DIR_PIN 19
#define ORIG_E1_ENABLE_PIN 38
#define ORIG_E0_STEP_PIN 40
#define ORIG_E0_DIR_PIN 41
#define ORIG_E0_ENABLE_PIN 37
#define ORIG_E0_STEP_PIN 40
#define ORIG_E0_DIR_PIN 41
#define ORIG_E0_ENABLE_PIN 37
#define SDPOWER -1
#define LED_PIN -1 //Use +12V Aux port for LED Ring
#define SDPOWER -1
#define LED_PIN -1 // Use +12V Aux port for LED Ring
#define ORIG_FAN_PIN 16 //5V PWM
#define ORIG_FAN_PIN 16 // 5V PWM
#define PS_ON_PIN 10 //Set to -1 if using a manual switch on the PWRSW Connector
#define SLEEP_WAKE_PIN 26 //This feature still needs work
#define PS_ON_PIN 10 // Set to -1 if using a manual switch on the PWRSW Connector
#define SLEEP_WAKE_PIN 26 // This feature still needs work
#define ORIG_HEATER_0_PIN 45 //12V PWM1
#define ORIG_HEATER_1_PIN 46 //12V PWM2
#define ORIG_HEATER_2_PIN 17 //12V PWM3
#define ORIG_HEATER_BED_PIN 44 //DOUBLE 12V PWM
#define ORIG_TEMP_0_PIN 3 //ANALOG NUMBERING
#define ORIG_TEMP_1_PIN 2 //ANALOG NUMBERING
#define ORIG_TEMP_2_PIN 1 //ANALOG NUMBERING
#define ORIG_TEMP_BED_PIN 0 //ANALOG NUMBERING
#define ORIG_HEATER_0_PIN 45 // 12V PWM1
#define ORIG_HEATER_1_PIN 46 // 12V PWM2
#define ORIG_HEATER_2_PIN 17 // 12V PWM3
#define ORIG_HEATER_BED_PIN 44 // DOUBLE 12V PWM
#define ORIG_TEMP_0_PIN 3 // ANALOG NUMBERING
#define ORIG_TEMP_1_PIN 2 // ANALOG NUMBERING
#define ORIG_TEMP_2_PIN 1 // ANALOG NUMBERING
#define ORIG_TEMP_BED_PIN 0 // ANALOG NUMBERING
#define BEEPER_PIN 36
#define BEEPER_PIN 36
#define KILL_PIN -1
#define KILL_PIN -1
// M240 Triggers a camera by emulating a Canon RC-1 Remote
// Data from: http://www.doc-diy.net/photo/rc-1_hacked/
#define PHOTOGRAPH_PIN 29
#define PHOTOGRAPH_PIN 29
#if ENABLED(RA_CONTROL_PANEL)
#define SDSS 53
#define SD_DETECT_PIN 28
#define SDSS 53
#define SD_DETECT_PIN 28
#define BTN_EN1 14
#define BTN_EN2 39
#define BTN_ENC 15 //the click
#define BTN_EN1 14
#define BTN_EN2 39
#define BTN_ENC 15 // the click
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0
#endif //RA_CONTROL_PANEL
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0
#endif //RA_CONTROL_PANEL
#if ENABLED(RA_DISCO)
//variables for which pins the TLC5947 is using
#define TLC_CLOCK_PIN 25
#define TLC_BLANK_PIN 23
#define TLC_XLAT_PIN 22
#define TLC_DATA_PIN 24
#define TLC_CLOCK_PIN 25
#define TLC_BLANK_PIN 23
#define TLC_XLAT_PIN 22
#define TLC_DATA_PIN 24
//We also need to define pin to port number mapping for the 2560 to match the pins listed above. If you change the TLC pins, update this as well per the 2560 datasheet!
