Fix

MK/Configuration_Store.cpp

@@ -933,20 +933,20 @@ void ConfigSD_ResetDefault() {
     card.setroot(true);
     card.startWrite((char *)CFG_SD_FILE, false);
     char buff[CFG_SD_MAX_VALUE_LEN];
+    ltoa(print_job_counter.data.completePrints, buff, 10);
+    card.unparseKeyLine(cfgSD_KEY[SD_CFG_CPR], buff);
+    ltoa(print_job_counter.data.printer_usage_filament, buff, 10);
+    card.unparseKeyLine(cfgSD_KEY[SD_CFG_FIL], buff);
+    ltoa(print_job_counter.data.numberPrints, buff, 10);
+    card.unparseKeyLine(cfgSD_KEY[SD_CFG_NPR], buff);
     #if HAS(POWER_CONSUMPTION_SENSOR)
       ltoa(power_consumption_hour, buff, 10);
       card.unparseKeyLine(cfgSD_KEY[SD_CFG_PWR], buff);
     #endif
-    ltoa(print_job_counter.data.numberPrints, buff, 10);
-    card.unparseKeyLine(cfgSD_KEY[SD_CFG_NPR], buff);
-    ltoa(print_job_counter.data.completePrints, buff, 10);
-    card.unparseKeyLine(cfgSD_KEY[SD_CFG_CPR], buff);
-    ltoa(print_job_counter.data.printTime, buff, 10);
-    card.unparseKeyLine(cfgSD_KEY[SD_CFG_TPR], buff);
     ltoa(print_job_counter.data.printer_usage_seconds, buff, 10);
     card.unparseKeyLine(cfgSD_KEY[SD_CFG_TME], buff);
-    ltoa(print_job_counter.data.printer_usage_filament, buff, 10);
-    card.unparseKeyLine(cfgSD_KEY[SD_CFG_FIL], buff);
+    ltoa(print_job_counter.data.printTime, buff, 10);
+    card.unparseKeyLine(cfgSD_KEY[SD_CFG_TPR], buff);
 
     card.closeFile();
     card.setlast();
@@ -966,44 +966,48 @@ void ConfigSD_ResetDefault() {
       k_len = CFG_SD_MAX_KEY_LEN;
       v_len = CFG_SD_MAX_VALUE_LEN;
       card.parseKeyLine(key, value, k_len, v_len);
+
       if(k_len == 0 || v_len == 0) break; // no valid key or value founded
+
       k_idx = ConfigSD_KeyIndex(key);
       if(k_idx == -1) continue;    // unknow key ignore it
+
       switch(k_idx) {
-        #if HAS(POWER_CONSUMPTION_SENSOR)
-        case SD_CFG_PWR: {
-          if(addValue) power_consumption_hour += (unsigned long)atol(value);
-          else power_consumption_hour = (unsigned long)atol(value);
+        case SD_CFG_CPR: {
+          if(addValue) print_job_counter.data.completePrints += (unsigned long)atol(value);
+          else print_job_counter.data.completePrints = (unsigned long)atol(value);
+        }
+        break;
+        case SD_CFG_FIL: {
+          if(addValue) print_job_counter.data.printer_usage_filament += (unsigned long)atol(value);
+          else print_job_counter.data.printer_usage_filament = (unsigned long)atol(value);
         }
         break;
-        #endif
         case SD_CFG_NPR: {
           if(addValue) print_job_counter.data.numberPrints += (unsigned long)atol(value);
           else print_job_counter.data.numberPrints = (unsigned long)atol(value);
         }
         break;
-        case SD_CFG_CPR: {
-          if(addValue) print_job_counter.data.completePrints += (unsigned long)atol(value);
-          else print_job_counter.data.completePrints = (unsigned long)atol(value);
-        }
-        break;
-        case SD_CFG_TPR: {
-          if(addValue) print_job_counter.data.printTime += (unsigned long)atol(value);
-          else print_job_counter.data.printTime = (unsigned long)atol(value);
+      #if HAS(POWER_CONSUMPTION_SENSOR)
+        case SD_CFG_PWR: {
+          if(addValue) power_consumption_hour += (unsigned long)atol(value);
+          else power_consumption_hour = (unsigned long)atol(value);
         }
         break;
+      #endif
         case SD_CFG_TME: {
           if(addValue) print_job_counter.data.printer_usage_seconds += (unsigned long)atol(value);
           else print_job_counter.data.printer_usage_seconds = (unsigned long)atol(value);
         }
         break;
-        case SD_CFG_FIL: {
-          if(addValue) print_job_counter.data.printer_usage_filament += (unsigned long)atol(value);
-          else print_job_counter.data.printer_usage_filament = (unsigned long)atol(value);
+        case SD_CFG_TPR: {
+          if(addValue) print_job_counter.data.printTime += (unsigned long)atol(value);
+          else print_job_counter.data.printTime = (unsigned long)atol(value);
         }
         break;
       }
     }
+
     card.closeFile();
     card.setlast();
     config_readed = true;
@@ -1012,6 +1016,7 @@ void ConfigSD_ResetDefault() {
 
   int ConfigSD_KeyIndex(char *key) {  // At the moment a binary search algorithm is used for simplicity, if it will be necessary (Eg. tons of key), an hash search algorithm will be implemented.
     int begin = 0, end = SD_CFG_END - 1, middle, cond;
+
     while(begin <= end) {
       middle = (begin + end) / 2;
       cond = strcmp(cfgSD_KEY[middle], key);
@@ -1019,6 +1024,7 @@ void ConfigSD_ResetDefault() {
       else if(cond < 0) begin = middle + 1;
       else end = middle - 1;
     }
+
     return -1;
   }
 

MK/module/MK_Main.cpp

@@ -1907,6 +1907,7 @@ inline void do_blocking_move_to_z(float z) { do_blocking_move_to(current_positio
     for (int y = 0; y < AUTO_BED_LEVELING_GRID_POINTS; y++) {
       ECHO_S(DB);
       for (int x = 0; x < AUTO_BED_LEVELING_GRID_POINTS; x++) {
+        if(bed_level[x][y] >= 0) ECHO_M(" ");
         ECHO_VM(bed_level[x][y], " ", 3);
       }
       ECHO_E;
@@ -3118,10 +3119,10 @@ void gcode_get_destination() {
     if (next_feedrate > 0.0) feedrate = next_feedrate;
   }
 
-  if (code_seen('P')) {
+  if (code_seen('P'))
     destination[E_AXIS] = (code_value() * density_multiplier[previous_extruder] / 100) + current_position[E_AXIS];
-  }
 
+  if(!DEBUGGING(DRYRUN))
     print_job_counter.data.printer_usage_filament += (destination[E_AXIS] - current_position[E_AXIS]);
 
   #if ENABLED(RFID_MODULE)
@@ -5423,7 +5424,7 @@ inline void gcode_M104() {
      * stand by mode, for instance in a dual extruder setup, without affecting
      * the running print timer.
      */
-    if (temp <= (EXTRUDE_MINTEMP)/2) {
+    if (temp <= (EXTRUDE_MINTEMP) / 2) {
       print_job_counter.stop();
       LCD_MESSAGEPGM(WELCOME_MSG);
     }

MK/module/lcd/ultralcd_implementation_hitachi_HD44780.h

@@ -50,7 +50,7 @@ extern volatile uint8_t buttons;  //an extended version of the last checked butt
     #define EN_C (_BV(BLEN_C))
   #endif
 
-  #if BUTTON_EXISTS(BTN_BACK)
+  #if BUTTON_EXISTS(BACK)
     #define BLEN_D 3
     #define EN_D (_BV(BLEN_D))
   #endif

MK/module/printcounter/printcounter.cpp

@@ -55,7 +55,7 @@ void PrintCounter::showStats() {
   ECHO_EV (this->data.numberPrints - this->data.completePrints -
           ((this->isRunning() || this->isPaused()) ? 1 : 0)); // Removes 1 from failures with an active counter
 
-  day     = (this->data.printTime / 60 / 60 / 24);
+  day     = this->data.printTime / 60 / 60 / 24;
   hours   = (this->data.printTime / 60 / 60) % 24;
   minutes = (this->data.printTime / 60) % 60;