Skip to content

M
MarlinKimbra
Commit da19d06e authored by MagoKimbra's avatar MagoKimbra
Browse files
Options

Update V4.2.7 

Add M408 Json Output
parent ac4ce4e2
Expand all Show whitespace changes
Inline Side-by-side
Showing with 708 additions and 118 deletions
Documentation/Compilation.md
View file @ da19d06e
...@@ -4,8 +4,8 @@ ...@@ -4,8 +4,8 @@
2. Download the MarlinKimbra firmware 2. Download the MarlinKimbra firmware
https://github.com/MagoKimbra/MarlinKimbra https://github.com/MagoKimbra/MarlinKimbra
Use the "Download Zip" button on the right. Use the "Download Zip" button on the right.
3. Some boards require special files and/or libraries from the ArduinoAddons directory. 3. Some boards require special files and/or libraries from the Arduino directory.
4. Start the arduino IDE 1.6.7. 4. Start the arduino IDE
5. Select File -> Preferences -> Compiler warning and select none 5. Select File -> Preferences -> Compiler warning and select none
6. Select Tools -> Board -> Arduino Mega 2560 or your microcontroller 6. Select Tools -> Board -> Arduino Mega 2560 or your microcontroller
7. Select the correct serial port in Tools ->Serial Port 7. Select the correct serial port in Tools ->Serial Port
......
Documentation/GCodes.md
View file @ da19d06e
...@@ -42,7 +42,7 @@ ...@@ -42,7 +42,7 @@
* M29 - Stop SD write * M29 - Stop SD write
* M30 - Delete file from SD (M30 filename.g) * M30 - Delete file from SD (M30 filename.g)
* M31 - Output time since last M109 or SD card start to serial * M31 - Output time since last M109 or SD card start to serial
* M32 - Select file and start SD print (Can be used when printing from SD card) * M32 - Make directory
* M42 - Change pin status via gcode Use M42 Px Sy to set pin x to value y, when omitting Px the onboard led will be used. * M42 - Change pin status via gcode Use M42 Px Sy to set pin x to value y, when omitting Px the onboard led will be used.
* M49 - Z probe repetability test * M49 - Z probe repetability test
* M80 - Turn on Power Supply * M80 - Turn on Power Supply
...@@ -71,6 +71,11 @@ ...@@ -71,6 +71,11 @@
* M128 - EtoP Open (BariCUDA EtoP = electricity to air pressure transducer by jmil) * M128 - EtoP Open (BariCUDA EtoP = electricity to air pressure transducer by jmil)
* M129 - EtoP Closed (BariCUDA EtoP = electricity to air pressure transducer by jmil) * M129 - EtoP Closed (BariCUDA EtoP = electricity to air pressure transducer by jmil)
* M140 - Set bed target temp * M140 - Set bed target temp
* M145 - Set the heatup state H<hotend> B<bed> F<fan speed> for S<material> (0=PLA, 1=ABS)
* M150 - Set BlinkM Color Output R: Red<0-255> U(!): Green<0-255> B: Blue<0-255> over i2c, G for green does not work.
* M163 - Set a single proportion for a mixing extruder. Requires COLOR_MIXING_EXTRUDER.
* M164 - Save the mix as a virtual extruder. Requires COLOR_MIXING_EXTRUDER and MIXING_VIRTUAL_TOOLS.
* M165 - Set the proportions for a mixing extruder. Use parameters ABCDHI to set the mixing factors. Requires COLOR_MIXING_EXTRUDER.
* M190 - S[xxx] Wait for bed current temp to reach target temp. Waits only when heating - R[xxx] Wait for bed current temp to reach target temp. Waits when heating and cooling * M190 - S[xxx] Wait for bed current temp to reach target temp. Waits only when heating - R[xxx] Wait for bed current temp to reach target temp. Waits when heating and cooling
* M200 - D[millimeters]- set filament diameter and set E axis units to cubic millimeters (use S0 to set back to millimeters). * M200 - D[millimeters]- set filament diameter and set E axis units to cubic millimeters (use S0 to set back to millimeters).
* M201 - Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000 Z1000 E0 S1000 E1 S1000 E2 S1000 E3 S1000) in mm/sec^2 * M201 - Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000 Z1000 E0 S1000 E1 S1000 E2 S1000 E3 S1000) in mm/sec^2
...@@ -101,6 +106,7 @@ ...@@ -101,6 +106,7 @@
* M405 - Turn on Filament Sensor extrusion control. Optional D[delay in cm] to set delay in centimeters between sensor and extruder * M405 - Turn on Filament Sensor extrusion control. Optional D[delay in cm] to set delay in centimeters between sensor and extruder
* M406 - Turn off Filament Sensor extrusion control * M406 - Turn off Filament Sensor extrusion control
* M407 - Displays measured filament diameter * M407 - Displays measured filament diameter
* M408 - Report JSON-style response
* M410 - Quickstop. Abort all the planned moves * M410 - Quickstop. Abort all the planned moves
* M428 - Set the home_offset logically based on the current_position * M428 - Set the home_offset logically based on the current_position
* M500 - stores paramters in EEPROM * M500 - stores paramters in EEPROM
...@@ -112,6 +118,7 @@ ...@@ -112,6 +118,7 @@
* M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal] * M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]
* M605 - Set dual x-carriage movement mode: Smode [ X<duplication x-offset> Rduplication temp offset ] * M605 - Set dual x-carriage movement mode: Smode [ X<duplication x-offset> Rduplication temp offset ]
* M666 - Set z probe offset or Endstop and delta geometry adjustment. M666 L for list command * M666 - Set z probe offset or Endstop and delta geometry adjustment. M666 L for list command
* M906 - Set motor currents XYZ T0-4 E
* M907 - Set digital trimpot motor current using axis codes. * M907 - Set digital trimpot motor current using axis codes.
* M908 - Control digital trimpot directly. * M908 - Control digital trimpot directly.
* M928 - Start SD logging (M928 filename.g) - ended by M29 * M928 - Start SD logging (M928 filename.g) - ended by M29
......
Documentation/changelog.md
View file @ da19d06e
### Version 4.2.7
* Add M906 Set motor Currents for ALLIGATOR board
* Add M408 JSON OUTPUT
### Version 4.2.6 ### Version 4.2.6
* Bug Fix * Bug Fix
......
MK/Configuration_Feature.h
View file @ da19d06e
...@@ -70,6 +70,7 @@ ...@@ -70,6 +70,7 @@
* - L6470 motor drivers * - L6470 motor drivers
* ADVANCED FEATURES: * ADVANCED FEATURES:
* - Buffer stuff * - Buffer stuff
* - Report JSON-style response
* - Whatchdog * - Whatchdog
* - Start / Stop Gcode * - Start / Stop Gcode
* *
...@@ -1527,6 +1528,27 @@ ...@@ -1527,6 +1528,27 @@
/****************************************************************************************/ /****************************************************************************************/
/*****************************************************************************************
************************************* JSON OUTPUT ***************************************
*****************************************************************************************
* *
* M408: Report JSON-style response *
* Report a JSON-style response by specifying the desired type using the 'S' parameter. *
* The following response types are supported: *
* Type 0 is a short-form response. *
* Type 1 is like type 0 except that static values are also included. *
* Type 2 is similar to the response provided by the web server for Duet Web Control. *
* Type 3 is an extended version of type 2 which includes some additional parameters *
* that aren't expected to change very frequently. *
* Type 4 is an extended version of type 2 which may be used to poll for current *
* printer statistics. *
* Type 5 reports the current machine configuration. *
* *
*****************************************************************************************/
//#define JSON_OUTPUT
/*****************************************************************************************/
/***************************************************************************************** /*****************************************************************************************
*************************************** Whatchdog *************************************** *************************************** Whatchdog ***************************************
***************************************************************************************** *****************************************************************************************
......
MK/Configuration_Store.cpp
View file @ da19d06e
...@@ -98,7 +98,8 @@ ...@@ -98,7 +98,8 @@
* *
* M??? S IDLE_OOZING_enabled * M??? S IDLE_OOZING_enabled
* *
* * ALLIGATOR:
* M906 XYZ T0-4 E Motor current
* *
*/ */
...@@ -256,6 +257,10 @@ void Config_StoreSettings() { ...@@ -256,6 +257,10 @@ void Config_StoreSettings() {
EEPROM_WRITE_VAR(i, IDLE_OOZING_enabled); EEPROM_WRITE_VAR(i, IDLE_OOZING_enabled);
#endif #endif
#if MB(ALLIGATOR)
EEPROM_WRITE_VAR(i, motor_current);
#endif
char ver2[4] = EEPROM_VERSION; char ver2[4] = EEPROM_VERSION;
int j = EEPROM_OFFSET; int j = EEPROM_OFFSET;
EEPROM_WRITE_VAR(j, ver2); // validate data EEPROM_WRITE_VAR(j, ver2); // validate data
...@@ -406,6 +411,10 @@ void Config_RetrieveSettings() { ...@@ -406,6 +411,10 @@ void Config_RetrieveSettings() {
EEPROM_READ_VAR(i, IDLE_OOZING_enabled); EEPROM_READ_VAR(i, IDLE_OOZING_enabled);
#endif #endif
#if MB(ALLIGATOR)
EEPROM_READ_VAR(i, motor_current);
#endif
// Call updatePID (similar to when we have processed M301) // Call updatePID (similar to when we have processed M301)
updatePID(); updatePID();
...@@ -448,6 +457,10 @@ void Config_ResetDefault() { ...@@ -448,6 +457,10 @@ void Config_ResetDefault() {
float tmp12[] = {0}; float tmp12[] = {0};
#endif #endif
#if MB(ALLIGATOR)
float tmp13[] = MOTOR_CURRENT;
#endif
for (int8_t i = 0; i < 3 + EXTRUDERS; i++) { for (int8_t i = 0; i < 3 + EXTRUDERS; i++) {
short max_i; short max_i;
max_i = sizeof(tmp1) / sizeof(*tmp1); max_i = sizeof(tmp1) / sizeof(*tmp1);
...@@ -494,6 +507,13 @@ void Config_ResetDefault() { ...@@ -494,6 +507,13 @@ void Config_ResetDefault() {
hotend_offset[Z_AXIS][i] = 0; hotend_offset[Z_AXIS][i] = 0;
#endif // HOTENDS > 1 #endif // HOTENDS > 1
} }
#if MB(ALLIGATOR)
max_i = sizeof(tmp13) / sizeof(*tmp13);
if(i < max_i)
motor_current[i] = tmp13[i];
else
motor_current[i] = tmp13[max_i - 1];
#endif
} }
#if MECH(SCARA) #if MECH(SCARA)
...@@ -767,15 +787,15 @@ void Config_ResetDefault() { ...@@ -767,15 +787,15 @@ void Config_ResetDefault() {
if (!forReplay) { if (!forReplay) {
ECHO_LM(CFG, "Material heatup parameters:"); ECHO_LM(CFG, "Material heatup parameters:");
} }
ECHO_SMV(CFG, " M145 M0 H", plaPreheatHotendTemp); ECHO_SMV(CFG, " M145 S0 H", plaPreheatHotendTemp);
ECHO_MV(" B", plaPreheatHPBTemp); ECHO_MV(" B", plaPreheatHPBTemp);
ECHO_MV(" F", plaPreheatFanSpeed); ECHO_MV(" F", plaPreheatFanSpeed);
ECHO_EM(" (Material PLA)"); ECHO_EM(" (Material PLA)");
ECHO_SMV(CFG, " M145 M1 H", absPreheatHotendTemp); ECHO_SMV(CFG, " M145 S1 H", absPreheatHotendTemp);
ECHO_MV(" B", absPreheatHPBTemp); ECHO_MV(" B", absPreheatHPBTemp);
ECHO_MV(" F", absPreheatFanSpeed); ECHO_MV(" F", absPreheatFanSpeed);
ECHO_EM(" (Material ABS)"); ECHO_EM(" (Material ABS)");
ECHO_SMV(CFG, " M145 M2 H", gumPreheatHotendTemp); ECHO_SMV(CFG, " M145 S2 H", gumPreheatHotendTemp);
ECHO_MV(" B", gumPreheatHPBTemp); ECHO_MV(" B", gumPreheatHPBTemp);
ECHO_MV(" F", gumPreheatFanSpeed); ECHO_MV(" F", gumPreheatFanSpeed);
ECHO_EM(" (Material GUM)"); ECHO_EM(" (Material GUM)");
...@@ -786,7 +806,7 @@ void Config_ResetDefault() { ...@@ -786,7 +806,7 @@ void Config_ResetDefault() {
ECHO_LM(CFG, "PID settings:"); ECHO_LM(CFG, "PID settings:");
} }
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
for (int8_t h = 0; h < HOTENDS; h++) { for (uint8_t h = 0; h < HOTENDS; h++) {
ECHO_SMV(CFG, " M301 H", h); ECHO_SMV(CFG, " M301 H", h);
ECHO_MV(" P", PID_PARAM(Kp, h)); ECHO_MV(" P", PID_PARAM(Kp, h));
ECHO_MV(" I", unscalePID_i(PID_PARAM(Ki, h))); ECHO_MV(" I", unscalePID_i(PID_PARAM(Ki, h)));
...@@ -858,6 +878,22 @@ void Config_ResetDefault() { ...@@ -858,6 +878,22 @@ void Config_ResetDefault() {
} }
} }
#if MB(ALLIGATOR)
if (!forReplay) {
ECHO_LM(CFG, "Current:");
}
ECHO_SMV(CFG, " M906 X", motor_current[X_AXIS]);
ECHO_MV(" Y", motor_current[Y_AXIS]);
ECHO_MV(" Z", motor_current[Z_AXIS]);
ECHO_EMV(" E", motor_current[E_AXIS]);
#if DRIVER_EXTRUDERS > 1
for (uint8_t i = 1; i < DRIVER_EXTRUDERS; i++) {
ECHO_SMV(CFG, " M906 T", i);
ECHO_EMV(" E", motor_current[E_AXIS + i]);
}
#endif // DRIVER_EXTRUDERS > 1
#endif // ALLIGATOR
ConfigSD_PrintSettings(forReplay); ConfigSD_PrintSettings(forReplay);
} }
......
MK/Configuration_Version.h
View file @ da19d06e
#ifndef CONFIGURATION_VERSION_H #ifndef CONFIGURATION_VERSION_H
#define CONFIGURATION_VERSION_H #define CONFIGURATION_VERSION_H
#define SHORT_BUILD_VERSION "4.2.6_dev" #define FIRMWARE_NAME "MK"
#define BUILD_VERSION "MK_" SHORT_BUILD_VERSION #define SHORT_BUILD_VERSION "4.2.7_dev"
#define BUILD_VERSION FIRMWARE_NAME "_" SHORT_BUILD_VERSION
#define STRING_DISTRIBUTION_DATE __DATE__ " " __TIME__ // build date and time #define STRING_DISTRIBUTION_DATE __DATE__ " " __TIME__ // build date and time
// It might also be appropriate to define a location where additional information can be found // It might also be appropriate to define a location where additional information can be found
#define FIRMWARE_URL "https://github.com/MagoKimbra/MarlinKimbra" #define FIRMWARE_URL "https://github.com/MagoKimbra/MarlinKimbra"
......
MK/MK.ino
View file @ da19d06e
...@@ -154,6 +154,7 @@ ...@@ -154,6 +154,7 @@
* M405 - Turn on Filament Sensor extrusion control. Optional D<delay in cm> to set delay in centimeters between sensor and extruder * M405 - Turn on Filament Sensor extrusion control. Optional D<delay in cm> to set delay in centimeters between sensor and extruder
* M406 - Turn off Filament Sensor extrusion control * M406 - Turn off Filament Sensor extrusion control
* M407 - Display measured filament diameter * M407 - Display measured filament diameter
* M408 - Report JSON-style response
* M410 - Quickstop. Abort all the planned moves * M410 - Quickstop. Abort all the planned moves
* M428 - Set the home_offset logically based on the current_position * M428 - Set the home_offset logically based on the current_position
* M500 - Store parameters in EEPROM * M500 - Store parameters in EEPROM
...@@ -166,6 +167,7 @@ ...@@ -166,6 +167,7 @@
* M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal] * M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]
* M605 - Set dual x-carriage movement mode: S<mode> [ X<duplication x-offset> R<duplication temp offset> ] * M605 - Set dual x-carriage movement mode: S<mode> [ X<duplication x-offset> R<duplication temp offset> ]
* M666 - Set z probe offset or Endstop and delta geometry adjustment * M666 - Set z probe offset or Endstop and delta geometry adjustment
* M906 - Set motor currents XYZ T0-4 E
* M907 - Set digital trimpot motor current using axis codes. * M907 - Set digital trimpot motor current using axis codes.
* M908 - Control digital trimpot directly. * M908 - Control digital trimpot directly.
* *
...@@ -206,9 +208,6 @@ ...@@ -206,9 +208,6 @@
#include <LiquidCrystal.h> // library for character LCD #include <LiquidCrystal.h> // library for character LCD
#endif #endif
#endif #endif
#if ENABLED(NEXTION)
#include <Nextion.h>
#endif
#if HAS(DIGIPOTSS) #if HAS(DIGIPOTSS)
#include <SPI.h> #include <SPI.h>
#endif #endif
MK/module/MK_Main.cpp
View file @ da19d06e
This diff is collapsed.
MK/module/MK_Main.h
View file @ da19d06e
...@@ -217,6 +217,10 @@ extern uint8_t active_extruder; ...@@ -217,6 +217,10 @@ extern uint8_t active_extruder;
extern uint8_t previous_extruder; extern uint8_t previous_extruder;
extern uint8_t active_driver; extern uint8_t active_driver;
#if MB(ALLIGATOR)
extern float motor_current[DRIVER_EXTRUDERS + 3];
#endif
#if ENABLED(DIGIPOT_I2C) #if ENABLED(DIGIPOT_I2C)
extern void digipot_i2c_set_current( int channel, float current ); extern void digipot_i2c_set_current( int channel, float current );
extern void digipot_i2c_init(); extern void digipot_i2c_init();
......
MK/module/lcd/ultralcd.cpp
View file @ da19d06e
...@@ -334,7 +334,7 @@ static void lcd_status_screen() { ...@@ -334,7 +334,7 @@ static void lcd_status_screen() {
#endif // SDSUPPORT #endif // SDSUPPORT
} }
#endif #endif
#endif //LCD_PROGRESS_BAR #endif // LCD_PROGRESS_BAR
lcd_implementation_status_screen(); lcd_implementation_status_screen();
...@@ -494,7 +494,6 @@ void lcd_set_home_offsets() { ...@@ -494,7 +494,6 @@ void lcd_set_home_offsets() {
lcd_return_to_status(); lcd_return_to_status();
} }
#if ENABLED(BABYSTEPPING) #if ENABLED(BABYSTEPPING)
static void _lcd_babystep(int axis, const char* msg) { static void _lcd_babystep(int axis, const char* msg) {
...@@ -624,9 +623,9 @@ static void lcd_tune_menu() { ...@@ -624,9 +623,9 @@ static void lcd_tune_menu() {
MENU_ITEM_EDIT(int3, MSG_FLOW " 2", &extruder_multiplier[2], 10, 999); MENU_ITEM_EDIT(int3, MSG_FLOW " 2", &extruder_multiplier[2], 10, 999);
#if EXTRUDERS > 3 #if EXTRUDERS > 3
MENU_ITEM_EDIT(int3, MSG_FLOW " 3", &extruder_multiplier[3], 10, 999); MENU_ITEM_EDIT(int3, MSG_FLOW " 3", &extruder_multiplier[3], 10, 999);
#endif //EXTRUDERS > 3 #endif // EXTRUDERS > 3
#endif //EXTRUDERS > 2 #endif // EXTRUDERS > 2
#endif //EXTRUDERS > 1 #endif // EXTRUDERS > 1
// //
// Babystep X: // Babystep X:
...@@ -637,7 +636,7 @@ static void lcd_tune_menu() { ...@@ -637,7 +636,7 @@ static void lcd_tune_menu() {
#if ENABLED(BABYSTEP_XY) #if ENABLED(BABYSTEP_XY)
MENU_ITEM(submenu, MSG_BABYSTEP_X, lcd_babystep_x); MENU_ITEM(submenu, MSG_BABYSTEP_X, lcd_babystep_x);
MENU_ITEM(submenu, MSG_BABYSTEP_Y, lcd_babystep_y); MENU_ITEM(submenu, MSG_BABYSTEP_Y, lcd_babystep_y);
#endif //BABYSTEP_XY #endif // BABYSTEP_XY
MENU_ITEM(submenu, MSG_BABYSTEP_Z, lcd_babystep_z); MENU_ITEM(submenu, MSG_BABYSTEP_Z, lcd_babystep_z);
#endif #endif
...@@ -663,8 +662,8 @@ static void lcd_tune_menu() { ...@@ -663,8 +662,8 @@ static void lcd_tune_menu() {
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], feedrate, active_extruder, active_driver); plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], feedrate, active_extruder, active_driver);
#endif #endif
} }
static void lcd_purge() {lcd_extrude(LCD_PURGE_LENGTH, LCD_PURGE_FEEDRATE);} static void lcd_purge() { lcd_extrude(LCD_PURGE_LENGTH, LCD_PURGE_FEEDRATE); }
static void lcd_retract() {lcd_extrude(-LCD_RETRACT_LENGTH, LCD_RETRACT_FEEDRATE);} static void lcd_retract() { lcd_extrude(-LCD_RETRACT_LENGTH, LCD_RETRACT_FEEDRATE); }
static void lcd_easy_load() { static void lcd_easy_load() {
allow_lengthy_extrude_once = true; allow_lengthy_extrude_once = true;
lcd_extrude(BOWDEN_LENGTH, LCD_LOAD_FEEDRATE); lcd_extrude(BOWDEN_LENGTH, LCD_LOAD_FEEDRATE);
...@@ -675,7 +674,7 @@ static void lcd_tune_menu() { ...@@ -675,7 +674,7 @@ static void lcd_tune_menu() {
lcd_extrude(-BOWDEN_LENGTH, LCD_UNLOAD_FEEDRATE); lcd_extrude(-BOWDEN_LENGTH, LCD_UNLOAD_FEEDRATE);
lcd_return_to_status(); lcd_return_to_status();
} }
#endif //EASY_LOAD #endif // EASY_LOAD
void _lcd_preheat(int endnum, const float temph, const float tempb, const int fan) { void _lcd_preheat(int endnum, const float temph, const float tempb, const int fan) {
if (temph > 0) setTargetHotend(temph, endnum); if (temph > 0) setTargetHotend(temph, endnum);
...@@ -966,6 +965,7 @@ static void _lcd_move(const char* name, AxisEnum axis, int min, int max) { ...@@ -966,6 +965,7 @@ static void _lcd_move(const char* name, AxisEnum axis, int min, int max) {
if (lcdDrawUpdate) lcd_implementation_drawedit(name, ftostr31(current_position[axis])); if (lcdDrawUpdate) lcd_implementation_drawedit(name, ftostr31(current_position[axis]));
if (LCD_CLICKED) lcd_goto_menu(lcd_move_menu_axis); if (LCD_CLICKED) lcd_goto_menu(lcd_move_menu_axis);
} }
#if MECH(DELTA) #if MECH(DELTA)
static float delta_clip_radius_2 = BED_PRINTER_RADIUS * BED_PRINTER_RADIUS; static float delta_clip_radius_2 = BED_PRINTER_RADIUS * BED_PRINTER_RADIUS;
static int delta_clip( float a ) { return sqrt(delta_clip_radius_2 - a * a); } static int delta_clip( float a ) { return sqrt(delta_clip_radius_2 - a * a); }
...@@ -1006,10 +1006,10 @@ static void lcd_move_e( ...@@ -1006,10 +1006,10 @@ static void lcd_move_e(
case 2: pos_label = PSTR(MSG_MOVE_E "2"); break; case 2: pos_label = PSTR(MSG_MOVE_E "2"); break;
#if EXTRUDERS > 3 #if EXTRUDERS > 3
case 3: pos_label = PSTR(MSG_MOVE_E "3"); break; case 3: pos_label = PSTR(MSG_MOVE_E "3"); break;
#endif //EXTRUDERS > 3 #endif // EXTRUDERS > 3
#endif //EXTRUDERS > 2 #endif // EXTRUDERS > 2
} }
#endif //EXTRUDERS > 1 #endif // EXTRUDERS > 1
lcd_implementation_drawedit(pos_label, ftostr31(current_position[E_AXIS])); lcd_implementation_drawedit(pos_label, ftostr31(current_position[E_AXIS]));
} }
if (LCD_CLICKED) lcd_goto_menu(lcd_move_menu_axis); if (LCD_CLICKED) lcd_goto_menu(lcd_move_menu_axis);
...@@ -1025,8 +1025,8 @@ static void lcd_move_e( ...@@ -1025,8 +1025,8 @@ static void lcd_move_e(
static void lcd_move_e2() { lcd_move_e(2); } static void lcd_move_e2() { lcd_move_e(2); }
#if EXTRUDERS > 3 #if EXTRUDERS > 3
static void lcd_move_e3() { lcd_move_e(3); } static void lcd_move_e3() { lcd_move_e(3); }
#endif #endif // EXTRUDERS > 3
#endif #endif // EXTRUDERS > 2
#endif // EXTRUDERS > 1 #endif // EXTRUDERS > 1
/** /**
...@@ -1034,7 +1034,6 @@ static void lcd_move_e( ...@@ -1034,7 +1034,6 @@ static void lcd_move_e(
* "Prepare" > "Move Xmm" > "Move XYZ" submenu * "Prepare" > "Move Xmm" > "Move XYZ" submenu
* *
*/ */
static void lcd_move_menu_axis() { static void lcd_move_menu_axis() {
START_MENU(lcd_move_menu); START_MENU(lcd_move_menu);
MENU_ITEM(back, MSG_MOVE_AXIS, lcd_move_menu); MENU_ITEM(back, MSG_MOVE_AXIS, lcd_move_menu);
...@@ -1051,8 +1050,8 @@ static void lcd_move_menu_axis() { ...@@ -1051,8 +1050,8 @@ static void lcd_move_menu_axis() {
MENU_ITEM(submenu, MSG_MOVE_E "2", lcd_move_e2); MENU_ITEM(submenu, MSG_MOVE_E "2", lcd_move_e2);
#if EXTRUDERS > 3 #if EXTRUDERS > 3
MENU_ITEM(submenu, MSG_MOVE_E "3", lcd_move_e3); MENU_ITEM(submenu, MSG_MOVE_E "3", lcd_move_e3);
#endif #endif // EXTRUDERS > 3
#endif #endif // EXTRUDERS > 2
#endif // EXTRUDERS > 1 #endif // EXTRUDERS > 1
} }
END_MENU(); END_MENU();
...@@ -1083,7 +1082,7 @@ static void lcd_move_menu() { ...@@ -1083,7 +1082,7 @@ static void lcd_move_menu() {
MENU_ITEM(submenu, MSG_MOVE_10MM, lcd_move_menu_10mm); MENU_ITEM(submenu, MSG_MOVE_10MM, lcd_move_menu_10mm);
MENU_ITEM(submenu, MSG_MOVE_1MM, lcd_move_menu_1mm); MENU_ITEM(submenu, MSG_MOVE_1MM, lcd_move_menu_1mm);
MENU_ITEM(submenu, MSG_MOVE_01MM, lcd_move_menu_01mm); MENU_ITEM(submenu, MSG_MOVE_01MM, lcd_move_menu_01mm);
//TODO:X,Y,Z,E // TODO:X,Y,Z,E
END_MENU(); END_MENU();
} }
...@@ -1168,11 +1167,11 @@ static void lcd_stats_menu() { ...@@ -1168,11 +1167,11 @@ static void lcd_stats_menu() {
COPY_AND_SCALE(2); COPY_AND_SCALE(2);
#if HOTENDS > 3 #if HOTENDS > 3
COPY_AND_SCALE(3); COPY_AND_SCALE(3);
#endif //HOTENDS > 3 #endif // HOTENDS > 3
#endif //HOTENDS > 2 #endif // HOTENDS > 2
#endif //HOTENDS > 1 #endif // HOTENDS > 1
#endif //PIDTEMP #endif // PIDTEMP
/** /**
* *
...@@ -1240,32 +1239,32 @@ static void lcd_control_temperature_menu() { ...@@ -1240,32 +1239,32 @@ static void lcd_control_temperature_menu() {
// //
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// set up temp variables - undo the default scaling // set up temp variables - undo the default scaling
raw_Ki = unscalePID_i(PID_PARAM(Ki,0)); raw_Ki = unscalePID_i(PID_PARAM(Ki, 0));
raw_Kd = unscalePID_d(PID_PARAM(Kd,0)); raw_Kd = unscalePID_d(PID_PARAM(Kd, 0));
MENU_ITEM_EDIT(float52, MSG_PID_P, &PID_PARAM(Kp,0), 1, 9990); MENU_ITEM_EDIT(float52, MSG_PID_P, &PID_PARAM(Kp,0), 1, 9990);
// i is typically a small value so allows values below 1 // i is typically a small value so allows values below 1
MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I, &raw_Ki, 0.01, 9990, copy_and_scalePID_i_H0); MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I, &raw_Ki, 0.01, 9990, copy_and_scalePID_i_H0);
MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D, &raw_Kd, 1, 9990, copy_and_scalePID_d_H0); MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D, &raw_Kd, 1, 9990, copy_and_scalePID_d_H0);
#if HOTENDS > 1 #if HOTENDS > 1
// set up temp variables - undo the default scaling // set up temp variables - undo the default scaling
raw_Ki = unscalePID_i(PID_PARAM(Ki,1)); raw_Ki = unscalePID_i(PID_PARAM(Ki, 1));
raw_Kd = unscalePID_d(PID_PARAM(Kd,1)); raw_Kd = unscalePID_d(PID_PARAM(Kd, 1));
MENU_ITEM_EDIT(float52, MSG_PID_P MSG_H1, &PID_PARAM(Kp,1), 1, 9990); MENU_ITEM_EDIT(float52, MSG_PID_P MSG_H1, &PID_PARAM(Kp,1), 1, 9990);
// i is typically a small value so allows values below 1 // i is typically a small value so allows values below 1
MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I MSG_H1, &raw_Ki, 0.01, 9990, copy_and_scalePID_i_H1); MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I MSG_H1, &raw_Ki, 0.01, 9990, copy_and_scalePID_i_H1);
MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D MSG_H1, &raw_Kd, 1, 9990, copy_and_scalePID_d_H1); MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D MSG_H1, &raw_Kd, 1, 9990, copy_and_scalePID_d_H1);
#if HOTENDS > 2 #if HOTENDS > 2
// set up temp variables - undo the default scaling // set up temp variables - undo the default scaling
raw_Ki = unscalePID_i(PID_PARAM(Ki,2)); raw_Ki = unscalePID_i(PID_PARAM(Ki, 2));
raw_Kd = unscalePID_d(PID_PARAM(Kd,2)); raw_Kd = unscalePID_d(PID_PARAM(Kd, 2));
MENU_ITEM_EDIT(float52, MSG_PID_P MSG_H2, &PID_PARAM(Kp,2), 1, 9990); MENU_ITEM_EDIT(float52, MSG_PID_P MSG_H2, &PID_PARAM(Kp,2), 1, 9990);
// i is typically a small value so allows values below 1 // i is typically a small value so allows values below 1
MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I MSG_H2, &raw_Ki, 0.01, 9990, copy_and_scalePID_i_H2); MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I MSG_H2, &raw_Ki, 0.01, 9990, copy_and_scalePID_i_H2);
MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D MSG_H2, &raw_Kd, 1, 9990, copy_and_scalePID_d_H2); MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D MSG_H2, &raw_Kd, 1, 9990, copy_and_scalePID_d_H2);
#if HOTENDS > 3 #if HOTENDS > 3
// set up temp variables - undo the default scaling // set up temp variables - undo the default scaling
raw_Ki = unscalePID_i(PID_PARAM(Ki,3)); raw_Ki = unscalePID_i(PID_PARAM(Ki, 3));
raw_Kd = unscalePID_d(PID_PARAM(Kd,3)); raw_Kd = unscalePID_d(PID_PARAM(Kd, 3));
MENU_ITEM_EDIT(float52, MSG_PID_P MSG_H3, &PID_PARAM(Kp,3), 1, 9990); MENU_ITEM_EDIT(float52, MSG_PID_P MSG_H3, &PID_PARAM(Kp,3), 1, 9990);
// i is typically a small value so allows values below 1 // i is typically a small value so allows values below 1
MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I MSG_H3, &raw_Ki, 0.01, 9990, copy_and_scalePID_i_H3); MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I MSG_H3, &raw_Ki, 0.01, 9990, copy_and_scalePID_i_H3);
...@@ -1448,9 +1447,9 @@ static void lcd_control_volumetric_menu() { ...@@ -1448,9 +1447,9 @@ static void lcd_control_volumetric_menu() {
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER " 2", &filament_size[2], DEFAULT_NOMINAL_FILAMENT_DIA - .5, DEFAULT_NOMINAL_FILAMENT_DIA + .5, calculate_volumetric_multipliers); MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER " 2", &filament_size[2], DEFAULT_NOMINAL_FILAMENT_DIA - .5, DEFAULT_NOMINAL_FILAMENT_DIA + .5, calculate_volumetric_multipliers);
#if EXTRUDERS > 3 #if EXTRUDERS > 3
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER " 3", &filament_size[3], DEFAULT_NOMINAL_FILAMENT_DIA - .5, DEFAULT_NOMINAL_FILAMENT_DIA + .5, calculate_volumetric_multipliers); MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER " 3", &filament_size[3], DEFAULT_NOMINAL_FILAMENT_DIA - .5, DEFAULT_NOMINAL_FILAMENT_DIA + .5, calculate_volumetric_multipliers);
#endif //EXTRUDERS > 3 #endif // EXTRUDERS > 3
#endif //EXTRUDERS > 2 #endif // EXTRUDERS > 2
#endif //EXTRUDERS > 1 #endif // EXTRUDERS > 1
} }
END_MENU(); END_MENU();
...@@ -1780,7 +1779,7 @@ void lcd_init() { ...@@ -1780,7 +1779,7 @@ void lcd_init() {
WRITE(SHIFT_EN, LOW); WRITE(SHIFT_EN, LOW);
#endif // SR_LCD_2W_NL #endif // SR_LCD_2W_NL
#endif//!NEWPANEL #endif // !NEWPANEL
#if ENABLED(SDSUPPORT) && PIN_EXISTS(SD_DETECT) #if ENABLED(SDSUPPORT) && PIN_EXISTS(SD_DETECT)
pinMode(SD_DETECT_PIN, INPUT); pinMode(SD_DETECT_PIN, INPUT);
...@@ -1909,7 +1908,7 @@ void lcd_update() { ...@@ -1909,7 +1908,7 @@ void lcd_update() {
lastEncoderMovementMillis = ms; lastEncoderMovementMillis = ms;
} // encoderRateMultiplierEnabled } // encoderRateMultiplierEnabled
#endif //ENCODER_RATE_MULTIPLIER #endif // ENCODER_RATE_MULTIPLIER
encoderPosition += (encoderDiff * encoderMultiplier) / ENCODER_PULSES_PER_STEP; encoderPosition += (encoderDiff * encoderMultiplier) / ENCODER_PULSES_PER_STEP;
encoderDiff = 0; encoderDiff = 0;
...@@ -1976,7 +1975,7 @@ void lcd_ignore_click(bool b) { ...@@ -1976,7 +1975,7 @@ void lcd_ignore_click(bool b) {
wait_for_unclick = false; wait_for_unclick = false;
} }
void lcd_finishstatus(bool persist=false) { void lcd_finishstatus(bool persist = false) {
#if ENABLED(LCD_PROGRESS_BAR) #if ENABLED(LCD_PROGRESS_BAR)
progress_bar_ms = millis(); progress_bar_ms = millis();
#if PROGRESS_MSG_EXPIRE > 0 #if PROGRESS_MSG_EXPIRE > 0
...@@ -2082,7 +2081,7 @@ void lcd_reset_alert_level() { lcd_status_message_level = 0; } ...@@ -2082,7 +2081,7 @@ void lcd_reset_alert_level() { lcd_status_message_level = 0; }
uint8_t newbutton_reprapworld_keypad = 0; uint8_t newbutton_reprapworld_keypad = 0;
WRITE(SHIFT_LD, LOW); WRITE(SHIFT_LD, LOW);
WRITE(SHIFT_LD, HIGH); WRITE(SHIFT_LD, HIGH);
for (int8_t i = 0; i < 8; i++) { for (uint8_t i = 0; i < 8; i++) {
newbutton_reprapworld_keypad >>= 1; newbutton_reprapworld_keypad >>= 1;
if (READ(SHIFT_OUT)) BITSET(newbutton_reprapworld_keypad, 7); if (READ(SHIFT_OUT)) BITSET(newbutton_reprapworld_keypad, 7);
WRITE(SHIFT_CLK, HIGH); WRITE(SHIFT_CLK, HIGH);
...@@ -2095,7 +2094,7 @@ void lcd_reset_alert_level() { lcd_status_message_level = 0; } ...@@ -2095,7 +2094,7 @@ void lcd_reset_alert_level() { lcd_status_message_level = 0; }
WRITE(SHIFT_LD, LOW); WRITE(SHIFT_LD, LOW);
WRITE(SHIFT_LD, HIGH); WRITE(SHIFT_LD, HIGH);
unsigned char tmp_buttons = 0; unsigned char tmp_buttons = 0;
for (int8_t i = 0; i < 8; i++) { for (uint8_t i = 0; i < 8; i++) {
newbutton >>= 1; newbutton >>= 1;
if (READ(SHIFT_OUT)) BITSET(newbutton, 7); if (READ(SHIFT_OUT)) BITSET(newbutton, 7);
WRITE(SHIFT_CLK, HIGH); WRITE(SHIFT_CLK, HIGH);
...@@ -2444,7 +2443,6 @@ char* ftostr52(const float& x) { ...@@ -2444,7 +2443,6 @@ char* ftostr52(const float& x) {
#if !MECH(DELTA) && DISABLED(Z_SAFE_HOMING) && Z_HOME_DIR < 0 #if !MECH(DELTA) && DISABLED(Z_SAFE_HOMING) && Z_HOME_DIR < 0
static void lcd_level_bed() { static void lcd_level_bed() {
switch(pageShowInfo) { switch(pageShowInfo) {
case 0: case 0:
{ {
......
MK/module/motion/stepper.cpp
View file @ da19d06e
...@@ -1374,7 +1374,6 @@ void digipot_init() { ...@@ -1374,7 +1374,6 @@ void digipot_init() {
#endif #endif
#if MB(ALLIGATOR) #if MB(ALLIGATOR)
const float motor_current[] = MOTOR_CURRENT;
unsigned int digipot_motor = 0; unsigned int digipot_motor = 0;
for (uint8_t i = 0; i < 3 + DRIVER_EXTRUDERS; i++) { for (uint8_t i = 0; i < 3 + DRIVER_EXTRUDERS; i++) {
digipot_motor = 255 * (motor_current[i] / 2.5); digipot_motor = 255 * (motor_current[i] / 2.5);
......
MK/module/motion/vector_3.cpp
View file @ da19d06e
...@@ -52,9 +52,9 @@ void vector_3::normalize() { ...@@ -52,9 +52,9 @@ void vector_3::normalize() {
} }
void vector_3::apply_rotation(matrix_3x3 matrix) { void vector_3::apply_rotation(matrix_3x3 matrix) {
float resultX = x * matrix.matrix[3 * 0 + 0] + y * matrix.matrix[3 * 1 + 0] + z * matrix.matrix[3 * 2 + 0]; float resultX = x * matrix.matrix[0][0] + y * matrix.matrix[1][0] + z * matrix.matrix[2][0];
float resultY = x * matrix.matrix[3 * 0 + 1] + y * matrix.matrix[3 * 1 + 1] + z * matrix.matrix[3 * 2 + 1]; float resultY = x * matrix.matrix[0][1] + y * matrix.matrix[1][1] + z * matrix.matrix[2][1];
float resultZ = x * matrix.matrix[3 * 0 + 2] + y * matrix.matrix[3 * 1 + 2] + z * matrix.matrix[3 * 2 + 2]; float resultZ = x * matrix.matrix[0][2] + y * matrix.matrix[1][2] + z * matrix.matrix[2][2];
x = resultX; x = resultX;
y = resultY; y = resultY;
z = resultZ; z = resultZ;
...@@ -80,17 +80,17 @@ matrix_3x3 matrix_3x3::create_from_rows(vector_3 row_0, vector_3 row_1, vector_3 ...@@ -80,17 +80,17 @@ matrix_3x3 matrix_3x3::create_from_rows(vector_3 row_0, vector_3 row_1, vector_3
//row_1.debug("row_1"); //row_1.debug("row_1");
//row_2.debug("row_2"); //row_2.debug("row_2");
matrix_3x3 new_matrix; matrix_3x3 new_matrix;
new_matrix.matrix[0] = row_0.x; new_matrix.matrix[1] = row_0.y; new_matrix.matrix[2] = row_0.z; new_matrix.matrix[0][0] = row_0.x; new_matrix.matrix[0][1] = row_0.y; new_matrix.matrix[0][2] = row_0.z;
new_matrix.matrix[3] = row_1.x; new_matrix.matrix[4] = row_1.y; new_matrix.matrix[5] = row_1.z; new_matrix.matrix[1][0] = row_1.x; new_matrix.matrix[1][1] = row_1.y; new_matrix.matrix[1][2] = row_1.z;
new_matrix.matrix[6] = row_2.x; new_matrix.matrix[7] = row_2.y; new_matrix.matrix[8] = row_2.z; new_matrix.matrix[2][0] = row_2.x; new_matrix.matrix[2][1] = row_2.y; new_matrix.matrix[2][2] = row_2.z;
//new_matrix.debug("new_matrix"); //new_matrix.debug("new_matrix");
return new_matrix; return new_matrix;
} }
void matrix_3x3::set_to_identity() { void matrix_3x3::set_to_identity() {
matrix[0] = 1; matrix[1] = 0; matrix[2] = 0; matrix[0][0] = 1; matrix[0][1] = 0; matrix[0][2] = 0;
matrix[3] = 0; matrix[4] = 1; matrix[5] = 0; matrix[1][0] = 0; matrix[1][1] = 1; matrix[1][2] = 0;
matrix[6] = 0; matrix[7] = 0; matrix[8] = 1; matrix[2][0] = 0; matrix[2][1] = 0; matrix[2][2] = 1;
} }
matrix_3x3 matrix_3x3::create_look_at(vector_3 target) { matrix_3x3 matrix_3x3::create_look_at(vector_3 target) {
...@@ -111,22 +111,20 @@ matrix_3x3 matrix_3x3::create_look_at(vector_3 target) { ...@@ -111,22 +111,20 @@ matrix_3x3 matrix_3x3::create_look_at(vector_3 target) {
matrix_3x3 matrix_3x3::transpose(matrix_3x3 original) { matrix_3x3 matrix_3x3::transpose(matrix_3x3 original) {
matrix_3x3 new_matrix; matrix_3x3 new_matrix;
new_matrix.matrix[0] = original.matrix[0]; new_matrix.matrix[1] = original.matrix[3]; new_matrix.matrix[2] = original.matrix[6]; new_matrix.matrix[0][0] = original.matrix[0][0]; new_matrix.matrix[0][1] = original.matrix[1][0]; new_matrix.matrix[0][2] = original.matrix[2][0];
new_matrix.matrix[3] = original.matrix[1]; new_matrix.matrix[4] = original.matrix[4]; new_matrix.matrix[5] = original.matrix[7]; new_matrix.matrix[1][0] = original.matrix[0][1]; new_matrix.matrix[1][1] = original.matrix[1][1]; new_matrix.matrix[1][2] = original.matrix[2][1];
new_matrix.matrix[6] = original.matrix[2]; new_matrix.matrix[7] = original.matrix[5]; new_matrix.matrix[8] = original.matrix[8]; new_matrix.matrix[2][0] = original.matrix[0][2]; new_matrix.matrix[2][1] = original.matrix[1][2]; new_matrix.matrix[2][2] = original.matrix[2][2];
return new_matrix; return new_matrix;
} }
void matrix_3x3::debug(const char title[]) { void matrix_3x3::debug(const char title[]) {
ECHO_LT(DB, title); ECHO_LT(DB, title);
int count = 0; for (uint8_t i = 0; i < 3; i++) {
for (int i = 0; i < 3; i++) {
ECHO_S(DB); ECHO_S(DB);
for (int j = 0; j < 3; j++) { for (uint8_t j = 0; j < 3; j++) {
if (matrix[count] >= 0.0) ECHO_C('+'); if (matrix[i][j] >= 0.0) ECHO_C('+');
ECHO_V(matrix[count], 6); ECHO_V(matrix[i][j], 6);
ECHO_C(' '); ECHO_C(' ');
count++;
} }
ECHO_E; ECHO_E;
} }
......
MK/module/motion/vector_3.h
View file @ da19d06e
...@@ -43,7 +43,7 @@ struct vector_3 { ...@@ -43,7 +43,7 @@ struct vector_3 {
}; };
struct matrix_3x3 { struct matrix_3x3 {
float matrix[9]; float matrix[3][3];
static matrix_3x3 create_from_rows(vector_3 row_0, vector_3 row_1, vector_3 row_2); static matrix_3x3 create_from_rows(vector_3 row_0, vector_3 row_1, vector_3 row_2);
static matrix_3x3 create_look_at(vector_3 target); static matrix_3x3 create_look_at(vector_3 target);
......
MK/module/sd/SDFat.cpp
View file @ da19d06e
...@@ -677,11 +677,11 @@ uint8_t SdBaseFile::lsRecursive(SdBaseFile* parent, uint8_t level, char* findFil ...@@ -677,11 +677,11 @@ uint8_t SdBaseFile::lsRecursive(SdBaseFile* parent, uint8_t level, char* findFil
ECHO_T(fullName); ECHO_T(fullName);
ECHO_C('/'); ECHO_C('/');
} }
#if JSON_OUTPUT #ifdef JSON_OUTPUT
if (isJson) { if (isJson) {
if (!firstFile) ECHO_C(','); if (!firstFile) ECHO_C(',');
ECHO_C('"'); ECHO_C('*'); ECHO_C('"'); ECHO_C('*');
SDCard::printEscapeChars(tempLongFilename); CardReader::printEscapeChars(tempLongFilename);
ECHO_C('"'); ECHO_C('"');
firstFile = false; firstFile = false;
} }
...@@ -731,11 +731,11 @@ uint8_t SdBaseFile::lsRecursive(SdBaseFile* parent, uint8_t level, char* findFil ...@@ -731,11 +731,11 @@ uint8_t SdBaseFile::lsRecursive(SdBaseFile* parent, uint8_t level, char* findFil
ECHO_T(fullName); ECHO_T(fullName);
ECHO_C('/'); ECHO_C('/');
} }
#if JSON_OUTPUT #ifdef JSON_OUTPUT
if (isJson) { if (isJson) {
if (!firstFile) ECHO_C(','); if (!firstFile) ECHO_C(',');
ECHO_C('"'); ECHO_C('"');
SDCard::printEscapeChars(tempLongFilename); CardReader::printEscapeChars(tempLongFilename);
ECHO_C('"'); ECHO_C('"');
firstFile = false; firstFile = false;
} }
...@@ -779,7 +779,7 @@ void SdBaseFile::ls(uint8_t flags, uint8_t indent) { ...@@ -779,7 +779,7 @@ void SdBaseFile::ls(uint8_t flags, uint8_t indent) {
lsRecursive(&parent, 0, NULL, NULL, false); lsRecursive(&parent, 0, NULL, NULL, false);
} }
#if JSON_OUTPUT #ifdef JSON_OUTPUT
void SdBaseFile::lsJSON() { void SdBaseFile::lsJSON() {
SdBaseFile parent; SdBaseFile parent;
rewind(); rewind();
......
MK/module/sd/SDFat.h
View file @ da19d06e
...@@ -1985,7 +1985,7 @@ class SdBaseFile { ...@@ -1985,7 +1985,7 @@ class SdBaseFile {
static bool remove(SdBaseFile& dirFile, const char* path) // NOLINT static bool remove(SdBaseFile& dirFile, const char* path) // NOLINT
__attribute__((error("use remove(&dirFile, path)"))); __attribute__((error("use remove(&dirFile, path)")));
#endif // ALLOW_DEPRECATED_FUNCTIONS #endif // ALLOW_DEPRECATED_FUNCTIONS
#if JSON_OUTPUT #ifdef JSON_OUTPUT
void lsJSON(); void lsJSON();
#endif #endif
}; };
......
MK/module/sd/cardreader.cpp
View file @ da19d06e
...@@ -8,7 +8,7 @@ char tempLongFilename[LONG_FILENAME_LENGTH + 1]; ...@@ -8,7 +8,7 @@ char tempLongFilename[LONG_FILENAME_LENGTH + 1];
char fullName[LONG_FILENAME_LENGTH * SD_MAX_FOLDER_DEPTH + SD_MAX_FOLDER_DEPTH + 1]; char fullName[LONG_FILENAME_LENGTH * SD_MAX_FOLDER_DEPTH + SD_MAX_FOLDER_DEPTH + 1];
CardReader::CardReader() { CardReader::CardReader() {
filesize = 0; fileSize = 0;
sdpos = 0; sdpos = 0;
sdprinting = false; sdprinting = false;
cardOK = false; cardOK = false;
...@@ -170,8 +170,11 @@ bool CardReader::selectFile(const char* filename, bool silent/*=false*/) { ...@@ -170,8 +170,11 @@ bool CardReader::selectFile(const char* filename, bool silent/*=false*/) {
ECHO_MT(SERIAL_SD_FILE_OPENED, oldP); ECHO_MT(SERIAL_SD_FILE_OPENED, oldP);
ECHO_EMV(SERIAL_SD_SIZE, file.fileSize()); ECHO_EMV(SERIAL_SD_SIZE, file.fileSize());
} }
#if ENABLED(JSON_OUTPUT)
parsejson(file);
#endif
sdpos = 0; sdpos = 0;
filesize = file.fileSize(); fileSize = file.fileSize();
ECHO_EM(SERIAL_SD_FILE_SELECTED); ECHO_EM(SERIAL_SD_FILE_SELECTED);
return true; return true;
} }
...@@ -184,7 +187,7 @@ bool CardReader::selectFile(const char* filename, bool silent/*=false*/) { ...@@ -184,7 +187,7 @@ bool CardReader::selectFile(const char* filename, bool silent/*=false*/) {
void CardReader::printStatus() { void CardReader::printStatus() {
if (cardOK) { if (cardOK) {
ECHO_MV(SERIAL_SD_PRINTING_BYTE, sdpos); ECHO_MV(SERIAL_SD_PRINTING_BYTE, sdpos);
ECHO_EMV(SERIAL_SD_SLASH, filesize); ECHO_EMV(SERIAL_SD_SLASH, fileSize);
} }
else else
ECHO_EM(SERIAL_SD_NOT_PRINTING); ECHO_EM(SERIAL_SD_NOT_PRINTING);
...@@ -333,6 +336,250 @@ void CardReader::setlast() { ...@@ -333,6 +336,250 @@ void CardReader::setlast() {
curDir = &workDir; curDir = &workDir;
} }
// --------------------------------------------------------------- //
// Code that gets gcode information is adapted from RepRapFirmware //
// Originally licenced under GPL //
// Authors: reprappro, dc42, dcnewman, others //
// Source: https://github.com/dcnewman/RepRapFirmware //
// Copy date: 27 FEB 2016 //
// --------------------------------------------------------------- //
void CardReader::parsejson(SdBaseFile &file) {
fileSize = file.fileSize();
filamentNeeded = 0.0;
objectHeight = 0.0;
firstlayerHeight = 0.0;
layerHeight = 0.0;
if (!file.isOpen()) return;
bool genByFound = false, firstlayerHeightFound = false, layerHeightFound = false, filamentNeedFound = false;
#if CPU_ARCH==ARCH_AVR
#define GCI_BUF_SIZE 120
#else
#define GCI_BUF_SIZE 1024
#endif
// READ 4KB FROM THE BEGINNING
char buf[GCI_BUF_SIZE];
for (int i = 0; i < 4096; i += GCI_BUF_SIZE - 50) {
if(!file.seekSet(i)) break;
file.read(buf, GCI_BUF_SIZE);
if (!genByFound && findGeneratedBy(buf, generatedBy)) genByFound = true;
if (!firstlayerHeightFound && findFirstLayerHeight(buf, firstlayerHeight)) firstlayerHeightFound = true;
if (!layerHeightFound && findLayerHeight(buf, layerHeight)) layerHeightFound = true;
if (!filamentNeedFound && findFilamentNeed(buf, filamentNeeded)) filamentNeedFound = true;
if(genByFound && layerHeightFound && filamentNeedFound) goto get_objectHeight;
}
// READ 4KB FROM END
for (int i = 0; i < 4096; i += GCI_BUF_SIZE - 50) {
if(!file.seekEnd(-4096 + i)) break;
file.read(buf, GCI_BUF_SIZE);
if (!genByFound && findGeneratedBy(buf, generatedBy)) genByFound = true;
if (!firstlayerHeightFound && findFirstLayerHeight(buf, firstlayerHeight)) firstlayerHeightFound = true;
if (!layerHeightFound && findLayerHeight(buf, layerHeight)) layerHeightFound = true;
if (!filamentNeedFound && findFilamentNeed(buf, filamentNeeded)) filamentNeedFound = true;
if(genByFound && layerHeightFound && filamentNeedFound) goto get_objectHeight;
}
get_objectHeight:
// MOVE FROM END UP IN 1KB BLOCKS UP TO 30KB
for (int i = GCI_BUF_SIZE; i < 30000; i += GCI_BUF_SIZE - 50) {
if(!file.seekEnd(-i)) break;
file.read(buf, GCI_BUF_SIZE);
if (findTotalHeight(buf, objectHeight)) break;
}
file.seekSet(0);
}
void CardReader::printEscapeChars(const char* s) {
for (unsigned int i = 0; i < strlen(s); ++i) {
switch (s[i]) {
case '"':
case '/':
case '\b':
case '\f':
case '\n':
case '\r':
case '\t':
case '\\':
ECHO_T('\\');
break;
}
ECHO_T(s[i]);
}
}
bool CardReader::findGeneratedBy(char* buf, char* genBy) {
// Slic3r & S3D
const char* generatedByString = PSTR("generated by ");
char* pos = strstr_P(buf, generatedByString);
if (pos) {
pos += strlen_P(generatedByString);
size_t i = 0;
while (i < GENBY_SIZE - 1 && *pos >= ' ') {
char c = *pos++;
if (c == '"' || c == '\\') {
// Need to escape the quote-mark for JSON
if (i > GENBY_SIZE - 3) break;
genBy[i++] = '\\';
}
genBy[i++] = c;
}
genBy[i] = 0;
return true;
}
// CURA
const char* slicedAtString = PSTR(";Sliced at: ");
pos = strstr_P(buf, slicedAtString);
if (pos) {
strcpy_P(genBy, PSTR("Cura"));
return true;
}
// UNKNOWN
strcpy_P(genBy, PSTR("Unknown"));
return false;
}
bool CardReader::findFirstLayerHeight(char* buf, float& firstlayerHeight) {
// SLIC3R
firstlayerHeight = 0;
const char* layerHeightSlic3r = PSTR("; first_layer_height ");
char *pos = strstr_P(buf, layerHeightSlic3r);
if (pos) {
pos += strlen_P(layerHeightSlic3r);
while (*pos == ' ' || *pos == 't' || *pos == '=' || *pos == ':') {
++pos;
}
firstlayerHeight = strtod(pos, NULL);
return true;
}
// CURA
const char* layerHeightCura = PSTR("First layer height: ");
pos = strstr_P(buf, layerHeightCura);
if (pos) {
pos += strlen_P(layerHeightCura);
while (*pos == ' ' || *pos == 't' || *pos == '=' || *pos == ':') {
++pos;
}
firstlayerHeight = strtod(pos, NULL);
return true;
}
return false;
}
bool CardReader::findLayerHeight(char* buf, float& layerHeight) {
// SLIC3R
layerHeight = 0;
const char* layerHeightSlic3r = PSTR("; layer_height ");
char *pos = strstr_P(buf, layerHeightSlic3r);
if (pos) {
pos += strlen_P(layerHeightSlic3r);
while (*pos == ' ' || *pos == 't' || *pos == '=' || *pos == ':') {
++pos;
}
layerHeight = strtod(pos, NULL);
return true;
}
// CURA
const char* layerHeightCura = PSTR("Layer height: ");
pos = strstr_P(buf, layerHeightCura);
if (pos) {
pos += strlen_P(layerHeightCura);
while (*pos == ' ' || *pos == 't' || *pos == '=' || *pos == ':') {
++pos;
}
layerHeight = strtod(pos, NULL);
return true;
}
return false;
}
bool CardReader::findFilamentNeed(char* buf, float& filament) {
const char* filamentUsedStr = PSTR("filament used");
const char* pos = strstr_P(buf, filamentUsedStr);
filament = 0;
if (pos != NULL) {
pos += strlen_P(filamentUsedStr);
while (*pos == ' ' || *pos == 't' || *pos == '=' || *pos == ':') {
++pos; // this allows for " = " from default slic3r comment and ": " from default Cura comment
}
if (isDigit(*pos)) {
char *q;
filament += strtod(pos, &q);
if (*q == 'm' && *(q + 1) != 'm') {
filament *= 1000.0; // Cura outputs filament used in metres not mm
}
}
return true;
}
return false;
}
bool CardReader::findTotalHeight(char* buf, float& height) {
int len = 1024;
bool inComment, inRelativeMode = false;
unsigned int zPos;
for (int i = len - 5; i > 0; i--) {
if (inRelativeMode) {
inRelativeMode = !(buf[i] == 'G' && buf[i + 1] == '9' && buf[i + 2] == '1' && buf[i + 3] <= ' ');
}
else if (buf[i] == 'G') {
// Ignore G0/G1 codes if absolute mode was switched back using G90 (typical for Cura files)
if (buf[i + 1] == '9' && buf[i + 2] == '0' && buf[i + 3] <= ' ') {
inRelativeMode = true;
}
else if ((buf[i + 1] == '0' || buf[i + 1] == '1') && buf[i + 2] == ' ') {
// Look for last "G0/G1 ... Z#HEIGHT#" command as generated by common slicers
// Looks like we found a controlled move, however it could be in a comment, especially when using slic3r 1.1.1
inComment = false;
size_t j = i;
while (j != 0) {
--j;
char c = buf[j];
if (c == '\n' || c == '\r') break;
if (c == ';') {
// It is in a comment, so give up on this one
inComment = true;
break;
}
}
if (inComment) continue;
// Find 'Z' position and grab that value
zPos = 0;
for (int j = i + 3; j < len - 2; j++) {
char c = buf[j];
if (c < ' ') {
// Skip all whitespaces...
while (j < len - 2 && c <= ' ') {
c = buf[++j];
}
// ...to make sure ";End" doesn't follow G0 .. Z#HEIGHT#
if (zPos != 0) {
//debugPrintf("Found at offset %u text: %.100s\n", zPos, &buf[zPos + 1]);
height = strtod(&buf[zPos + 1], NULL);
return true;
}
break;
}
else if (c == ';') break;
else if (c == 'Z') zPos = j;
}
}
}
}
return false;
}
/** /**
* File parser for KEY->VALUE format from files * File parser for KEY->VALUE format from files
* *
......
MK/module/sd/cardreader.h
View file @ da19d06e
...@@ -9,6 +9,7 @@ ...@@ -9,6 +9,7 @@
/** Total size of the buffer used to store the long filenames */ /** Total size of the buffer used to store the long filenames */
#define LONG_FILENAME_LENGTH (FILENAME_LENGTH * MAX_VFAT_ENTRIES + 1) #define LONG_FILENAME_LENGTH (FILENAME_LENGTH * MAX_VFAT_ENTRIES + 1)
#define SHORT_FILENAME_LENGTH 14 #define SHORT_FILENAME_LENGTH 14
#define GENBY_SIZE 16
extern char tempLongFilename[LONG_FILENAME_LENGTH + 1]; extern char tempLongFilename[LONG_FILENAME_LENGTH + 1];
extern char fullName[LONG_FILENAME_LENGTH * SD_MAX_FOLDER_DEPTH + SD_MAX_FOLDER_DEPTH + 1]; extern char fullName[LONG_FILENAME_LENGTH * SD_MAX_FOLDER_DEPTH + SD_MAX_FOLDER_DEPTH + 1];
...@@ -54,28 +55,37 @@ public: ...@@ -54,28 +55,37 @@ public:
FORCE_INLINE void setIndex(uint32_t newpos) { sdpos = newpos; file.seekSet(sdpos); } FORCE_INLINE void setIndex(uint32_t newpos) { sdpos = newpos; file.seekSet(sdpos); }
FORCE_INLINE bool isFileOpen() { return file.isOpen(); } FORCE_INLINE bool isFileOpen() { return file.isOpen(); }
FORCE_INLINE bool eof() { return sdpos >= filesize; } FORCE_INLINE bool eof() { return sdpos >= fileSize; }
FORCE_INLINE int16_t get() { sdpos = file.curPosition(); return (int16_t)file.read(); } FORCE_INLINE int16_t get() { sdpos = file.curPosition(); return (int16_t)file.read(); }
FORCE_INLINE uint8_t percentDone() { return (isFileOpen() && filesize) ? sdpos / ((filesize + 99) / 100) : 0; } FORCE_INLINE uint8_t percentDone() { return (isFileOpen() && fileSize) ? sdpos / ((fileSize + 99) / 100) : 0; }
FORCE_INLINE char* getWorkDirName() { workDir.getFilename(fullName); return fullName; } FORCE_INLINE char* getWorkDirName() { workDir.getFilename(fullName); return fullName; }
//files init.g on the sd card are performed in a row //files init.g on the sd card are performed in a row
//this is to delay autostart and hence the initialisaiton of the sd card to some seconds after the normal init, so the device is available quick after a reset //this is to delay autostart and hence the initialisaiton of the sd card to some seconds after the normal init, so the device is available quick after a reset
void checkautostart(bool x); void checkautostart(bool x);
public:
bool saving, sdprinting, cardOK, filenameIsDir; bool saving, sdprinting, cardOK, filenameIsDir;
uint32_t fileSize, sdpos;
float objectHeight, firstlayerHeight, layerHeight, filamentNeeded;
char generatedBy[GENBY_SIZE];
static void printEscapeChars(const char* s);
private: private:
SdBaseFile root, *curDir, workDir, lastDir, workDirParents[SD_MAX_FOLDER_DEPTH]; SdBaseFile root, *curDir, workDir, lastDir, workDirParents[SD_MAX_FOLDER_DEPTH];
Sd2Card card; Sd2Card card;
uint16_t workDirDepth; uint16_t workDirDepth;
uint32_t filesize;
millis_t next_autostart_ms; millis_t next_autostart_ms;
uint32_t sdpos;
uint16_t nrFiles; // counter for the files in the current directory and recycled as position counter for getting the nrFiles'th name in the directory. uint16_t nrFiles; // counter for the files in the current directory and recycled as position counter for getting the nrFiles'th name in the directory.
LsAction lsAction; //stored for recursion. LsAction lsAction; //stored for recursion.
bool autostart_stilltocheck; //the sd start is delayed, because otherwise the serial cannot answer fast enought to make contact with the hostsoftware. bool autostart_stilltocheck; //the sd start is delayed, because otherwise the serial cannot answer fast enought to make contact with the hostsoftware.
void lsDive(SdBaseFile parent, const char* const match = NULL); void lsDive(SdBaseFile parent, const char* const match = NULL);
void parsejson(SdBaseFile &file);
bool findGeneratedBy(char* buf, char* genBy);
bool findFirstLayerHeight(char* buf, float& firstlayerHeight);
bool findLayerHeight(char* buf, float& layerHeight);
bool findFilamentNeed(char* buf, float& filament);
bool findTotalHeight(char* buf, float& objectHeight);
}; };
extern CardReader card; extern CardReader card;
......
MK/module/servo/servo.cpp
View file @ da19d06e
...@@ -253,9 +253,7 @@ void Servo::detach() { ...@@ -253,9 +253,7 @@ void Servo::detach() {
void Servo::write(int value) { void Servo::write(int value) {
if (value < MIN_PULSE_WIDTH) { // treat values less than 544 as angles in degrees (valid values in microseconds are handled as microseconds) if (value < MIN_PULSE_WIDTH) { // treat values less than 544 as angles in degrees (valid values in microseconds are handled as microseconds)
if (value < 0) value = 0; value = map(constrain(value, 0, 180), 0, 180, SERVO_MIN(), SERVO_MAX());
if (value > 180) value = 180;
value = map(value, 0, 180, SERVO_MIN(), SERVO_MAX());
} }
this->writeMicroseconds(value); this->writeMicroseconds(value);
} }
...@@ -264,18 +262,13 @@ void Servo::writeMicroseconds(int value) { ...@@ -264,18 +262,13 @@ void Servo::writeMicroseconds(int value) {
// calculate and store the values for the given channel // calculate and store the values for the given channel
byte channel = this->servoIndex; byte channel = this->servoIndex;
if (channel < MAX_SERVOS) { // ensure channel is valid if (channel < MAX_SERVOS) { // ensure channel is valid
if (value < SERVO_MIN()) // ensure pulse width is valid // ensure pulse width is valid
value = SERVO_MIN(); value = constrain(value, SERVO_MIN(), SERVO_MAX()) - TRIM_DURATION;
else if (value > SERVO_MAX())
value = SERVO_MAX();
value = value - TRIM_DURATION;
value = usToTicks(value); // convert to ticks after compensating for interrupt overhead value = usToTicks(value); // convert to ticks after compensating for interrupt overhead
uint8_t oldSREG = SREG; CRITICAL_SECTION_START;
cli(); servo_info[channel].ticks = value;
servos[channel].ticks = value; CRITICAL_SECTION_END;
SREG = oldSREG;
} }
} }
......
MK/module/temperature/temperature.cpp
View file @ da19d06e
...@@ -1087,7 +1087,7 @@ void tp_init() { ...@@ -1087,7 +1087,7 @@ void tp_init() {
BITSET(TIMSK0, OCIE0B); BITSET(TIMSK0, OCIE0B);
// Wait for temperature measurement to settle // Wait for temperature measurement to settle
delay(250); delay_ms(250);
#define TEMP_MIN_ROUTINE(NR) \ #define TEMP_MIN_ROUTINE(NR) \
minttemp[NR] = HEATER_ ## NR ## _MINTEMP; \ minttemp[NR] = HEATER_ ## NR ## _MINTEMP; \
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment