Update 5.0.0 dev

First flash successuful

Documentation/changelog.md

+### Version 5.0.0
+* New configuration systems (Now you can create a separate file with all configuration and use it in you FW update)
+* New namings for file
+* Added more documentation inside configuration file
+* More checks for feature incompatibility during compilation
+* Codeclean
+* General bugfix
+* Removed legacy support for old configuration (Do not use your old configuration files, namings and position for configuration has changed)
+
 ### Version 4.1.5
 * Added dot for SD write operation
 * Added statistics menu

MarlinKimbra/MarlinKimbra.ino

@@ -30,7 +30,7 @@
 /* All the implementation is done in *.cpp files to get better compatibility with avr-gcc without the Arduino IDE */
 /* Use this file to help the Arduino IDE find which Arduino libraries are needed and to keep documentation on GCode */
 
-#include "elements.h"
+#include "base.h"
 
 #if ENABLED(DIGIPOT_I2C) || ENABLED(BLINKM)
   #include <Wire.h>

MarlinKimbra/MarlinSerial.cpp

@@ -20,7 +20,7 @@
   Modified 28 September 2010 by Mark Sproul
 */
 
-#include "elements.h"
+#include "base.h"
 
 #include "MarlinSerial.h"
 

MarlinKimbra/Marlin_main.cpp

@@ -27,11 +27,11 @@
  *  - http://reprap.org/pipermail/reprap-dev/2011-May/003323.html
  */
 
-#include "elements.h"
+#include "base.h"
 
 #include "Marlin_main.h"
 #include "ultralcd.h"
-#include "elements.h"
+#include "base.h"
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)
   #include "vector_3.h"
   #if ENABLED(AUTO_BED_LEVELING_GRID)
@@ -4282,7 +4282,7 @@ inline void gcode_G92() {
       hasS = codenum > 0;
     }
 
-    if (HASNTP && HASNTS && *args != '\0')
+    if (!hasP && !hasS && *args != '\0')
       lcd_setstatus(args, true);
     else {
       LCD_MESSAGEPGM(MSG_USERWAIT);
@@ -8087,7 +8087,9 @@ void kill(const char *lcd_msg) {
   sei();   // enable interrupts
   for (int i = 5; i--; lcd_update()) delay(200); // Wait a short time
   cli();   // disable interrupts
+  #if HAS(SUICIDE)
     suicide();
+  #endif
   while(1) { /* Intentionally left empty */ } // Wait for reset
 }
 

MarlinKimbra/Sd2Card.cpp

@@ -17,7 +17,7 @@
  * along with the Arduino Sd2Card Library.  If not, see
  * <http://www.gnu.org/licenses/>.
  */
-#include "elements.h"
+#include "base.h"
 
 #if ENABLED(SDSUPPORT)
 #include "Sd2Card.h"

MarlinKimbra/Sd2Card.h

@@ -20,7 +20,7 @@
 
 #ifndef Sd2Card_h
 #define Sd2Card_h
-#include "elements.h"
+#include "base.h"
 #if ENABLED(SDSUPPORT)
 
 /**

MarlinKimbra/SdBaseFile.cpp

@@ -18,7 +18,7 @@
  * <http://www.gnu.org/licenses/>.
  */
 
-#include "elements.h"
+#include "base.h"
 #if ENABLED(SDSUPPORT)
 #include "Marlin_main.h"
 #include <stdint.h>

MarlinKimbra/SdFatUtil.h

@@ -24,7 +24,7 @@
  * \file
  * \brief Useful utility functions.
  */
- #include "elements.h"
+ #include "base.h"
 #include "MarlinSerial.h"
 /** Store and print a string in flash memory.*/
 #define PgmPrint(x) SerialPrint_P(PSTR(x))

MarlinKimbra/SdFile.cpp

@@ -17,7 +17,7 @@
  * along with the Arduino SdFat Library.  If not, see
  * <http://www.gnu.org/licenses/>.
  */
-#include "elements.h"
+#include "base.h"
 #if ENABLED(SDSUPPORT)
 #include "Marlin_main.h"
 #include "SdFile.h"

MarlinKimbra/SdVolume.cpp

@@ -17,7 +17,7 @@
  * along with the Arduino SdFat Library.  If not, see
  * <http://www.gnu.org/licenses/>.
  */
-#include "elements.h"
+#include "base.h"
 #include "Marlin_main.h"
 #if ENABLED(SDSUPPORT)
 

MarlinKimbra/elements.h → MarlinKimbra/base.h

-#ifndef ELEMENTS_H
-#define ELEMENTS_H
+#ifndef BASE_H
+#define BASE_H
 
 #include "Arduino.h"
 #include "pins_arduino.h"

MarlinKimbra/blinkm.cpp

@@ -3,7 +3,7 @@
   Created by Tim Koster, August 21 2013.
 */
 
-#include "elements.h"
+#include "base.h"
 
 #if ENABLED(BLINKM)
 #include "blinkm.h"

MarlinKimbra/buzzer.cpp

 
-#include "elements.h"
+#include "base.h"
 
 #if HAS(BUZZER)
 

MarlinKimbra/cardreader.cpp

 
-#include "elements.h"
+#include "base.h"
 
 #if ENABLED(SDSUPPORT)
 

MarlinKimbra/configuration_store.cpp

-#include "elements.h"
+#include "base.h"
 #include "Marlin_main.h"
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)
   #include "vector_3.h"

MarlinKimbra/configuration_store.h

 #ifndef CONFIGURATION_STORE_H
 #define CONFIGURATION_STORE_H
 
-#include "elements.h"
+#include "base.h"
 
 void Config_ResetDefault();
 void ConfigSD_ResetDefault();

MarlinKimbra/digipot_mcp4451.cpp

 
-#include "elements.h"
+#include "base.h"
 
 #if ENABLED(DIGIPOT_I2C)
 

MarlinKimbra/external_dac.cpp

@@ -3,7 +3,7 @@
  * Externa DAC for Alligator Board
  *
  ****************************************************************/
-#include "elements.h"
+#include "base.h"
 
 #if MB(ALLIGATOR)
   #include "stepper.h"

MarlinKimbra/firmware_test.cpp

@@ -4,7 +4,7 @@
   By MagoKimbra
  */
  
-#include "elements.h"
+#include "base.h"
 #if ENABLED(FIRMWARE_TEST)
 #include "Marlin_main.h"
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)

MarlinKimbra/planner.cpp

@@ -48,7 +48,7 @@
  *
  */
 
-#include "elements.h"
+#include "base.h"
 #include "Marlin_main.h"
 
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)

MarlinKimbra/qr_solve.cpp

 
-#include "elements.h"
+#include "base.h"
 
 #if ENABLED(AUTO_BED_LEVELING_FEATURE) && ENABLED(AUTO_BED_LEVELING_GRID)
 #include "qr_solve.h"

MarlinKimbra/sanitycheck.h

@@ -1594,56 +1594,56 @@
   
   
   #if ENABLED(MKR4)
-    #if (EXTRUDERS == 2) && (DRIVER_EXTRUDERS == 1) && !PIN_EXIST(E0E1_CHOICE_PIN)
+    #if (EXTRUDERS == 2) && (DRIVER_EXTRUDERS == 1) && !PIN_EXISTS(E0E1_CHOICE_PIN)
       #error DEPENDENCY ERROR: You have to set E0E1_CHOICE_PIN to a valid pin if you enable MKR4 with 2 extruder and 1 driver
-    #elif (EXTRUDERS == 3) && (DRIVER_EXTRUDERS == 1) && (!PIN_EXIST(E0E1_CHOICE_PIN) || !PIN_EXIST(E0E2_CHOICE_PIN))
+    #elif (EXTRUDERS == 3) && (DRIVER_EXTRUDERS == 1) && (!PIN_EXISTS(E0E1_CHOICE_PIN) || !PIN_EXISTS(E0E2_CHOICE_PIN))
       #error DEPENDENCY ERROR: You have to set E0E1_CHOICE_PIN and E0E2_CHOICE_PIN to a valid pin if you enable MKR4 with 3 extruder and 1 driver
-    #elif (EXTRUDERS == 4) && (DRIVER_EXTRUDERS == 1) && (!PIN_EXIST(E0E1_CHOICE_PIN) || !PIN_EXIST(E0E2_CHOICE_PIN) || !PIN_EXIST(E0E3_CHOICE_PIN))
+    #elif (EXTRUDERS == 4) && (DRIVER_EXTRUDERS == 1) && (!PIN_EXISTS(E0E1_CHOICE_PIN) || !PIN_EXISTS(E0E2_CHOICE_PIN) || !PIN_EXISTS(E0E3_CHOICE_PIN))
       #error DEPENDENCY ERROR: You have to set E0E1_CHOICE_PIN, E0E2_CHOICE_PIN and E0E3_CHOICE_PIN to a valid pin if you enable MKR4 with 4 extruder and 1 driver
-    #elif (EXTRUDERS == 3) && (DRIVER_EXTRUDERS == 2) && !PIN_EXIST(E0E2_CHOICE_PIN)
+    #elif (EXTRUDERS == 3) && (DRIVER_EXTRUDERS == 2) && !PIN_EXISTS(E0E2_CHOICE_PIN)
       #error DEPENDENCY ERROR: You have to set E0E2_CHOICE_PIN to a valid pin if you enable MKR4 with 3 extruder and 2 driver
-    #elif (EXTRUDERS == 4) && (DRIVER_EXTRUDERS == 2) && (!PIN_EXIST(E0E1_CHOICE_PIN) || !PIN_EXIST(E1E3_CHOICE_PIN))
+    #elif (EXTRUDERS == 4) && (DRIVER_EXTRUDERS == 2) && (!PIN_EXISTS(E0E1_CHOICE_PIN) || !PIN_EXISTS(E1E3_CHOICE_PIN))
       #error DEPENDENCY ERROR: You have to set E0E2_CHOICE_PIN and E1E3_CHOICE_PIN to a valid pin if you enable MKR4 with 4 extruder and 2 driver
     #endif 
   #endif
 
-  #if ENABLED(NPR2) && !PIN_EXIST(E_MIN_PIN)
+  #if ENABLED(NPR2) && !PIN_EXISTS(E_MIN_PIN)
     #error DEPENDENCY ERROR: You have to set E_MIN_PIN to a valid pin if you enable NPR2
   #endif
 
-  #if ENABLED(LASERBEAM) && (!PIN_EXIST(LASER_PWR_PIN) ||  !PIN_EXIST(LASER_TTL_PIN)) 
+  #if ENABLED(LASERBEAM) && (!PIN_EXISTS(LASER_PWR_PIN) ||  !PIN_EXISTS(LASER_TTL_PIN)) 
     #error DEPENDENCY ERROR: You have to set LASER_PWR_PIN and LASER_TTL_PIN to a valid pin if you enable LASERBEAM
   #endif
 
-  #if ENABLED(FILAMENT_RUNOUT_SENSOR) && !PIN_EXIST(FILRUNOUT_PIN)
+  #if ENABLED(FILAMENT_RUNOUT_SENSOR) && !PIN_EXISTS(FILRUNOUT_PIN)
     #error DEPENDENCY ERROR: You have to set FILRUNOUT_PIN to a valid pin if you enable FILAMENT_RUNOUT_SENSOR
   #endif
 
-  #if ENABLED(FILAMENT_SENSOR) && !PIN_EXIST(FILWIDTH_PIN)
+  #if ENABLED(FILAMENT_SENSOR) && !PIN_EXISTS(FILWIDTH_PIN)
     #error DEPENDENCY ERROR: You have to set FILWIDTH_PIN to a valid pin if you enable FILAMENT_SENSOR
   #endif
 
-  #if ENABLED(POWER_CONSUMPTION) && !PIN_EXIST(POWER_CONSUMPTION_PIN)
+  #if ENABLED(POWER_CONSUMPTION) && !PIN_EXISTS(POWER_CONSUMPTION_PIN)
     #error DEPENDENCY ERROR: You have to set POWER_CONSUMPTION_PIN to a valid pin if you enable POWER_CONSUMPTION
   #endif
 
-  #if ENABLED(PHOTOGRAPH) && !PIN_EXIST(PHOTOGRAPH_PIN)
+  #if ENABLED(PHOTOGRAPH) && !PIN_EXISTS(PHOTOGRAPH_PIN)
     #error DEPENDENCY ERROR: You have to set PHOTOGRAPH_PIN to a valid pin if you enable PHOTOGRAPH
   #endif
 
-  #if ENABLED(CHDK) && !PIN_EXIST(CHDK_PIN)
+  #if ENABLED(CHDK) && !PIN_EXISTS(CHDK_PIN)
     #error DEPENDENCY ERROR: You have to set CHDK_PIN to a valid pin if you enable CHDK
   #endif
 
-  #if ENABLED(CONTROLLERFAN) && !PIN_EXIST(CONTROLLERFAN_PIN)
+  #if ENABLED(CONTROLLERFAN) && !PIN_EXISTS(CONTROLLERFAN_PIN)
     #error DEPENDENCY ERROR: You have to set CONTROLLERFAN_PIN to a valid pin if you enable CONTROLLERFAN
   #endif
 
-  #if ENABLED(EXTRUDER_AUTO_FAN) && !PIN_EXIST(EXTRUDER_0_AUTO_FAN_PIN) && !PIN_EXIST(EXTRUDER_1_AUTO_FAN_PIN) && !PIN_EXIST(EXTRUDER_2_AUTO_FAN_PIN) && !PIN_EXIST(EXTRUDER_3_AUTO_FAN_PIN)
+  #if ENABLED(EXTRUDER_AUTO_FAN) && !PIN_EXISTS(EXTRUDER_0_AUTO_FAN_PIN) && !PIN_EXISTS(EXTRUDER_1_AUTO_FAN_PIN) && !PIN_EXISTS(EXTRUDER_2_AUTO_FAN_PIN) && !PIN_EXISTS(EXTRUDER_3_AUTO_FAN_PIN)
     #error DEPENDENCY ERROR: You have to set at least one EXTRUDER_?_AUTO_FAN_PIN to a valid pin if you enable EXTRUDER_AUTO_FAN
   #endif
 
-  #if ENABLED(X2_IS_TMC) && (!PIN_EXIST(X2_ENABLE_PIN) || !PIN_EXIST(X2_STEP_PIN) || !PIN_EXIST(X2_DIR_PIN))
+  #if ENABLED(X2_IS_TMC) && (!PIN_EXISTS(X2_ENABLE_PIN) || !PIN_EXISTS(X2_STEP_PIN) || !PIN_EXISTS(X2_DIR_PIN))
     #error DEPENDENCY ERROR: You have to set X2_ENABLE_PIN, X2_STEP_PIN and X2_DIR_PIN to a valid pin if you enable X2_IS_TMC
   #endif
     
@@ -1651,7 +1651,7 @@
     #error DEPENDENCY ERROR: You have to set at least one SERVO?_PIN to a valid pin if you enable ENABLE_SERVOS
   #endif
   
-  #if ENABLED(Z_PROBE_SLED) !PIN_EXIST(SLED_PIN)
+  #if ENABLED(Z_PROBE_SLED) && !PIN_EXISTS(SLED_PIN)
     #error DEPENDENCY ERROR: You have to set SLED_PIN to a valid pin if you enable Z_PROBE_SLED
   #endif
 

MarlinKimbra/servo.cpp

@@ -44,7 +44,7 @@
 
 */
 
-#include "elements.h"
+#include "base.h"
 
 #if HAS(SERVOS)
 #include "servo.h"

MarlinKimbra/stepper.cpp

@@ -22,7 +22,7 @@
 /* The timer calculations of this module informed by the 'RepRap cartesian firmware' by Zack Smith
    and Philipp Tiefenbacher. */
 
-#include "elements.h"
+#include "base.h"
 #include "Marlin_main.h"
 
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)

MarlinKimbra/stepper_indirection.cpp

@@ -19,7 +19,7 @@
   along with Marlin.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#include "elements.h"
+#include "base.h"
 
 #include "stepper_indirection.h"
 #if ENABLED(HAVE_TMCDRIVER)

MarlinKimbra/temperature.cpp

@@ -18,7 +18,7 @@
  along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#include "elements.h"
+#include "base.h"
 #include "Marlin_main.h"
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)
   #include "vector_3.h"

MarlinKimbra/ultralcd.cpp

 
-#include "elements.h"
+#include "base.h"
 
 #if ENABLED(ULTRA_LCD)
 #include "Marlin_main.h"

MarlinKimbra/vector_3.cpp

@@ -17,7 +17,7 @@
   Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 */
 
-#include "elements.h"
+#include "base.h"
 
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)
 #include "vector_3.h"

MarlinKimbra/watchdog.cpp

-#include "elements.h"
+#include "base.h"
 #if ENABLED(USE_WATCHDOG)
 #include <avr/wdt.h>
 #include "whatchdog.h"