Skip to content

M
MarlinKimbra
Commit c260d3f4 authored by MagoKimbra's avatar MagoKimbra
Browse files
Options

Update 4.1.3

parent 2347123a
Hide whitespace changes
Inline Side-by-side
Showing with 3617 additions and 3053 deletions
MarlinKimbra/Configuration.h
View file @ c260d3f4
#ifndef CONFIGURATION_H
#define CONFIGURATION_H
// This configuration file contains basic settings. Select your:
// - board type
// - Mechanism type (cartesian-corexy-delta-scara)
// - temperature sensor type
//
// Mechanisms-settings can be found in configuration_xxxxxx.h
// Advanced settings can be found in Configuration_adv.h
#include "boards.h"
//===========================================================================
//============================= Getting Started =============================
//===========================================================================
#include "boards.h"
// Choose your board type.
// Either an numeric ID or name defined in boards.h is valid.
// See: https://github.com/MagoKimbra/MarlinKimbra/blob/master/Documentation/Hardware.md
/*
* This configuration file contains basic settings. Select your:
* - board type
* - Mechanism type (cartesian-corexy-delta-scara)
* - temperature sensor type
*
* Mechanisms-settings can be found in configuration_xxxxxx.h
* Advanced settings can be found in Configuration_adv.h
*/
/*
* Choose your board type.
* Either an numeric ID or name defined in boards.h is valid.
* See: https://github.com/MagoKimbra/MarlinKimbra/blob/master/Documentation/Hardware.md
*/
#define MOTHERBOARD BOARD_RAMPS_13_EFB
// User-specified version info of this build to display in [Pronterface, etc] terminal window during
// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
// build by the user have been successfully uploaded into firmware.
#define STRING_VERSION "4.1.2"
#define STRING_URL "reprap.org"
#define STRING_VERSION "4.1.3"
#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
#define STRING_SPLASH_LINE1 "v" STRING_VERSION // will be shown during bootup in line 1
......@@ -33,7 +39,7 @@
#define SERIAL_PORT 0
// This determines the communication speed of the printer
// 115200 - 250000
// 2400,9600,19200,38400,57600,115200,250000
#define BAUDRATE 115200
// This enables the serial port associated to the Bluetooth interface on AT90USB devices
......@@ -158,7 +164,7 @@
// 1010 is Pt1000 with 1k pullup (non standard)
// 147 is Pt100 with 4k7 pullup
// 110 is Pt100 with 1k pullup (non standard)
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
// Use it for Testing or Development purposes. NEVER for production machine.
// #define DUMMY_THERMISTOR_998_VALUE 25
// #define DUMMY_THERMISTOR_999_VALUE 100
......@@ -219,9 +225,10 @@
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
// If the temperature difference between the target temperature and the actual temperature
// is more then PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
#define PID_FUNCTIONAL_RANGE 10 // degC
#define PID_INTEGRAL_DRIVE_MAX PID_MAX // Limit for the integral term
#define K1 0.95 // Smoothing factor within the PID
#define PID_FUNCTIONAL_RANGE 10 // degC
#define PID_INTEGRAL_DRIVE_MAX PID_MAX // Limit for the integral term
#define K1 0.95 // Smoothing factor within the PID
#define MAX_OVERSHOOT_PID_AUTOTUNE 20 // Max valor for overshoot autotune
// HotEnd{HE0,HE1,HE2,HE3}
#define DEFAULT_Kp {40, 40, 40, 40} // Kp for E0, E1, E2, E3
......@@ -253,6 +260,7 @@
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
//#define PID_BED_DEBUG // Sends debug data to the serial port.
#define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER // limit for the integral term
//120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00
......@@ -278,7 +286,6 @@
#define EXTRUDE_MINTEMP 170 // degC
#define EXTRUDE_MAXLENGTH (X_MAX_LENGTH+Y_MAX_LENGTH) //prevent extrusion of very large distances.
//===========================================================================
//======================== Thermal Runaway Protection =======================
//===========================================================================
......@@ -294,30 +301,16 @@
* The solution: Once the temperature reaches the target, start observing.
* If the temperature stays too far below the target (hysteresis) for too long,
* the firmware will halt as a safety precaution.
*
* Note that because the countdown starts only AFTER the temperature reaches
* the target, this will not catch a thermistor that is already disconnected
* when the print starts!
*
* To enable for all extruder heaters, uncomment the two defines below:
*/
// Parameters for all extruder heaters
#define THERMAL_RUNAWAY_PROTECTION_PERIOD 40 // in seconds
#define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS 4 // in degree Celsius
// To enable for the bed heater, uncomment the two defines below:
// Parameters for the bed heater
#define THERMAL_RUNAWAY_PROTECTION_BED_PERIOD 20 // in seconds
#define THERMAL_RUNAWAY_PROTECTION_BED_HYSTERESIS 2 // in degree Celsius
//#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
//#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
//===========================================================================
//============================ User Interfaces ==============================
//===========================================================================
//==============================LCD and SD support=============================
//============================ LCD and SD support ===========================
// Choose ONE of these 3 charsets. This has to match your hardware. Ignored for full graphic display.
// To find out what type you have - compile with (test) - upload - click to get the menu. You'll see two typical lines from the upper half of the charset.
......@@ -352,6 +345,11 @@
//#define VIKI2
//#define miniVIKI
// This is a new controller currently under development.
// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
//#define ELB_FULL_GRAPHIC_CONTROLLER
// The RepRapDiscount Smart Controller (white PCB)
// http://reprap.org/wiki/RepRapDiscount_Smart_Controller
//#define REPRAP_DISCOUNT_SMART_CONTROLLER
......@@ -376,7 +374,10 @@
// REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARDUINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C
//#define RA_CONTROL_PANEL
// I2C Panels
/**
* I2C Panels
*/
//#define LCD_I2C_SAINSMART_YWROBOT
// PANELOLU2 LCD with status LEDs, separate encoder and click inputs
......@@ -384,12 +385,16 @@
// Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs
//#define LCD_I2C_VIKI
// SSD1306 OLED generic display support
// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
//#define U8GLIB_SSD1306
// Shift register panels
// ---------------------
// 2 wire Non-latching LCD SR from:
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//#define SAV_3DLCD
// option for invert rotary switch
......@@ -402,13 +407,13 @@
// #define LCD_SCREEN_ROT_270
// SPLASH SCREEN duration in millisecond
#define SPLASH_SCREEN_DURATION 2000 // Millisecond
#define SPLASH_SCREEN_DURATION 5000 // Millisecond
/** Display Voltage Logic Selector on Alligator Board
0 = Voltage level 3.3V
1 = Voltage level 5V
*/
#define UI_VOLTAGE_LEVEL 0 // Set 5 o 3.3 V
#define UI_VOLTAGE_LEVEL 1 // Set 5 o 3.3 V
//============================== Languages UI =========================
......@@ -441,12 +446,20 @@
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable EEPROM support
//#define EEPROM_SETTINGS
//#define EEPROM_CHITCHAT
#define EEPROM_CHITCHAT
// to disable EEPROM Serial responses and decrease program space by ~1700 byte: comment this out:
// please keep turned on if you can.
//#define DISABLE_M503
//===========================================================================
//========================== EXTRA SETTINGS ON SD ===========================
// Uncomment SD SETTINGS to enable the firmware to write some configuration, that require frequent update, on the SD card.
//#define SD_SETTINGS
#define SD_CFG_SECONDS 300 //seconds between update
#define CFG_SD_FILE "INFO.CFG" //name of the configuration file
#define CFG_SD_MAX_KEY_LEN 3+1 //icrease this if you add key name longer than the actual value.
#define CFG_SD_MAX_VALUE_LEN 12+1 //this should be enought for int, long and float if you need to retrive strings increase this carefully
//===========================================================================
//==================== Bowden Filament management ===========================
//#define EASY_LOAD
......@@ -496,9 +509,9 @@
* Support for a filament diameter sensor
* Also allows adjustment of diameter at print time (vs at slicing)
* Single extruder only at this point (extruder 0)
*
*
* Motherboards
* 34 - RAMPS1.4 - uses Analog input 5 on the AUX2 connector
* 34 - RAMPS1.4 - uses Analog input 5 on the AUX2 connector
* 81 - Printrboard - Uses Analog input 2 on the Exp1 connector (version B,C,D,E)
* 301 - Rambo - uses Analog input 3
* Note may require analog pins to be defined for different motherboards
......
MarlinKimbra/Configuration_Cartesian.h
View file @ c260d3f4
......@@ -25,10 +25,12 @@
#define X_MIN_ENDSTOP_LOGIC false // set to true to invert the logic of the endstop.
#define Y_MIN_ENDSTOP_LOGIC false // set to true to invert the logic of the endstop.
#define Z_MIN_ENDSTOP_LOGIC false // set to true to invert the logic of the endstop.
#define Z2_MIN_ENDSTOP_LOGIC false // set to true to invert the logic of the endstop.
#define E_MIN_ENDSTOP_LOGIC false // set to true to invert the logic of the endstop.
#define X_MAX_ENDSTOP_LOGIC false // set to true to invert the logic of the endstop.
#define Y_MAX_ENDSTOP_LOGIC false // set to true to invert the logic of the endstop.
#define Z_MAX_ENDSTOP_LOGIC false // set to true to invert the logic of the endstop.
#define Z2_MAX_ENDSTOP_LOGIC false // set to true to invert the logic of the endstop.
#define Z_PROBE_ENDSTOP_LOGIC false // set to true to invert the logic of the endstop.
// ENDSTOP SETTINGS:
......@@ -74,10 +76,10 @@
#define E_MIN_POS 0
//=====================================================================================
//============================= Bed Manual or Auto Leveling ===========================
//================ Manual Bed Leveling (MBL) or Auto Bed Leveling =====================
//=====================================================================================
// set the rectangle in which to probe in manual or automatic
// set the rectangle in which to probe in MBL or ABL
#define LEFT_PROBE_BED_POSITION 20
#define RIGHT_PROBE_BED_POSITION 180
#define FRONT_PROBE_BED_POSITION 20
......@@ -186,9 +188,7 @@
// default settings
#define DEFAULT_AXIS_STEPS_PER_UNIT {80,80,3200,625,625,625,625} // X, Y, Z, E0, E1, E2, E3 default steps per unit
#define DEFAULT_MAX_FEEDRATE {300,300,2,100,100,100,100} // X, Y, Z, E0, E1, E2, E3 (mm/sec)
#define DEFAULT_RETRACTION_MAX_FEEDRATE {110,110,110,110} // E0, E1, E2, E3 (mm/sec)
#define DEFAULT_MAX_ACCELERATION {3000,3000,50,1000,1000,1000,1000} // X, Y, Z, E0, E1, E2, E3 maximum start speed for accelerated moves.
#define DEFAULT_ACCELERATION 2500 // X, Y, Z and E max acceleration in mm/s^2 for printing moves
#define DEFAULT_RETRACT_ACCELERATION 10000 // E max acceleration in mm/s^2 for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration in mm/s^2 for travel (non printing) moves
......
MarlinKimbra/Configuration_Corexy.h
View file @ c260d3f4
......@@ -25,10 +25,12 @@
#define X_MIN_ENDSTOP_LOGIC false // set to true to invert the logic of the endstop.
#define Y_MIN_ENDSTOP_LOGIC false // set to true to invert the logic of the endstop.
#define Z_MIN_ENDSTOP_LOGIC false // set to true to invert the logic of the endstop.
#define Z2_MIN_ENDSTOP_LOGIC false // set to true to invert the logic of the endstop.
#define E_MIN_ENDSTOP_LOGIC false // set to true to invert the logic of the endstop.
#define X_MAX_ENDSTOP_LOGIC false // set to true to invert the logic of the endstop.
#define Y_MAX_ENDSTOP_LOGIC false // set to true to invert the logic of the endstop.
#define Z_MAX_ENDSTOP_LOGIC false // set to true to invert the logic of the endstop.
#define Z2_MAX_ENDSTOP_LOGIC false // set to true to invert the logic of the endstop.
#define Z_PROBE_ENDSTOP_LOGIC false // set to true to invert the logic of the endstop.
// ENDSTOP SETTINGS:
......@@ -74,10 +76,10 @@
#define E_MIN_POS 0
//=====================================================================================
//============================= Bed Manual or Auto Leveling ===========================
//================ Manual Bed Leveling (MBL) or Auto Bed Leveling =====================
//=====================================================================================
// set the rectangle in which to probe in manual or automatic
// set the rectangle in which to probe in MBL or ABL
#define LEFT_PROBE_BED_POSITION 20
#define RIGHT_PROBE_BED_POSITION 180
#define FRONT_PROBE_BED_POSITION 20
......@@ -88,7 +90,7 @@
//If you have enabled the Auto Bed Levelling and are using the same Z Probe for Z Homing,
//it is highly recommended you let this Z_SAFE_HOMING enabled!!!
//#define Z_SAFE_HOMING
#ifdef Z_SAFE_HOMING
#ifndef Z_SAFE_HOMING
#define Z_SAFE_HOMING_X_POINT (X_MAX_LENGTH/2) // X point for Z homing when homing all axis (G28) or homing Z
#define Z_SAFE_HOMING_Y_POINT (Y_MAX_LENGTH/2) // Y point for Z homing when homing all axis (G28) or homing Z
#endif
......@@ -186,9 +188,7 @@
// default settings
#define DEFAULT_AXIS_STEPS_PER_UNIT {80,80,3200,625,625,625,625} // X, Y, Z, E0, E1, E2, E3 default steps per unit
#define DEFAULT_MAX_FEEDRATE {300,300,2,100,100,100,100} // X, Y, Z, E0, E1, E2, E3 (mm/sec)
#define DEFAULT_RETRACTION_MAX_FEEDRATE {110,110,110,110} // E0, E1, E2, E3 (mm/sec)
#define DEFAULT_MAX_ACCELERATION {3000,3000,50,1000,1000,1000,1000} // X, Y, Z, E0, E1, E2, E3 maximum start speed for accelerated moves.
#define DEFAULT_ACCELERATION 2500 // X, Y, Z and E max acceleration in mm/s^2 for printing moves
#define DEFAULT_RETRACT_ACCELERATION 10000 // E max acceleration in mm/s^2 for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration in mm/s^2 for travel (non printing) moves
......
MarlinKimbra/Configuration_Delta.h
View file @ c260d3f4
......@@ -9,7 +9,9 @@
// Make delta curves from many straight lines (linear interpolation).
// This is a trade-off between visible corners (not enough segments)
// and processor overload (too many expensive sqrt calls).
#define DELTA_SEGMENTS_PER_SECOND 200
// The new function do not use segments per second but segments per mm
// if you want use new function comment this (using // at the start of the line)
#define DELTA_SEGMENTS_PER_SECOND 150
// Center-to-center distance of the holes in the diagonal push rods.
#define DEFAULT_DELTA_DIAGONAL_ROD 217.0 // mm
......@@ -29,6 +31,9 @@
//Uncomment to enable autocalibration debug messages
#define DEBUG_MESSAGES
//Amount to lift head after probing a point
#define AUTOCAL_PROBELIFT 3 // mm
// Precision for G30 delta autocalibration function
#define AUTOCALIBRATION_PRECISION 0.1 // mm
......@@ -37,14 +42,14 @@
// Z-Probe variables
// Start and end location values are used to deploy/retract the probe (will move from start to end and back again)
#define PROBING_FEEDRATE 500 // Speed for individual probe Use: G30 A F600
#define PROBING_FEEDRATE 1000 // Speed in mm/min for individual probe Use: G30 A F600
#define Z_PROBE_OFFSET {0, 0, -1, 0} // X, Y, Z, E distance between hotend nozzle and deployed bed leveling probe.
#define Z_PROBE_DEPLOY_START_LOCATION {0, 0, 30, 0} // X, Y, Z, E start location for z-probe deployment sequence
#define Z_PROBE_DEPLOY_END_LOCATION {0, 0, 30, 0} // X, Y, Z, E end location for z-probe deployment sequence
#define Z_PROBE_RETRACT_START_LOCATION {0, 0, 30, 0} // X, Y, Z, E start location for z-probe retract sequence
#define Z_PROBE_RETRACT_END_LOCATION {0, 0, 30, 0} // X, Y, Z, E end location for z-probe retract sequence
#define Z_RAISE_BETWEEN_PROBINGS 2 // How much the extruder will be raised when travelling from between next probing points
#define AUTOLEVEL_GRID 24 // Distance between autolevel Z probing points, should be less than print surface radius/3.
#define AUTOLEVEL_GRID 20 // Distance between autolevel Z probing points, should be less than print surface radius/3.
//===========================================================================
//=============================Mechanical Settings===========================
......@@ -80,9 +85,9 @@
// ENDSTOP SETTINGS:
// Sets direction of endstop when homing; 1=MAX, -1=MIN
#define X_HOME_DIR 1 //DELTA MUST HAVE MAX ENDSTOP
#define Y_HOME_DIR 1 //DELTA MUST HAVE MAX ENDSTOP
#define Z_HOME_DIR 1 //DELTA MUST HAVE MAX ENDSTOP
#define X_HOME_DIR 1 // DELTA MUST HAVE MAX ENDSTOP
#define Y_HOME_DIR 1 // DELTA MUST HAVE MAX ENDSTOP
#define Z_HOME_DIR 1 // DELTA MUST HAVE MAX ENDSTOP
#define min_software_endstops true // If true, axis won't move to coordinates less than HOME_POS.
#define max_software_endstops true // If true, axis won't move to coordinates greater than the defined lengths below.
......@@ -136,9 +141,7 @@
// delta speeds must be the same on xyz
#define DEFAULT_AXIS_STEPS_PER_UNIT {80,80,80,451,625,625,625} // X, Y, Z, E0, E1, E2, E3
#define DEFAULT_MAX_FEEDRATE {300,300,300,45,100,100,100} // X, Y, Z, E0, E1, E2, E3 (mm/sec)
#define DEFAULT_RETRACTION_MAX_FEEDRATE {150,150,150,150} // E0, E1, E2, E3 (mm/sec)
#define DEFAULT_MAX_ACCELERATION {2000,2000,2000,1000,1000,1000,1000} // X, Y, Z, E0, E1, E2, E3 maximum start speed for accelerated moves.
#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E max acceleration in mm/s^2 for printing moves
#define DEFAULT_RETRACT_ACCELERATION 2500 // X, Y, Z and E max acceleration in mm/s^2 for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration in mm/s^2 for travel (non printing) moves
......
MarlinKimbra/Configuration_Scara.h
View file @ c260d3f4
......@@ -7,7 +7,7 @@
// QHARLEYS Autobedlevelling has not been ported, because Marlin has now Bed-levelling
// You might need Z-Min endstop on SCARA-Printer to use this feature. Actually untested!
// Uncomment to use Morgan scara mode
#define scara_segments_per_second 200 //careful, two much will decrease performance...
#define SCARA_SEGMENTS_PER_SECOND 200 // If movement is choppy try lowering this value
// Length of inner support arm
#define Linkage_1 150 //mm Preprocessor cannot handle decimal point...
// Length of outer support arm Measure arm lengths precisely and enter
......@@ -210,9 +210,7 @@
// default settings
#define DEFAULT_AXIS_STEPS_PER_UNIT {103.69,103.69,200/1.25,1000,1000,1000,1000} // X, Y, Z, E0, E1, E2, E3
#define DEFAULT_MAX_FEEDRATE {300,300,4,45,45,45,45} // X, Y, Z, E0, E1, E2, E3 (mm/sec)
#define DEFAULT_RETRACTION_MAX_FEEDRATE {80,80,80,80} // E0, E1, E2, E3 (mm/sec)
#define DEFAULT_MAX_ACCELERATION {5000,5000,50,5000,5000,5000,5000} // X, Y, Z, E0, E1, E2, E3 maximum start speed for accelerated moves.
#define DEFAULT_ACCELERATION 400 // X, Y, Z and E max acceleration in mm/s^2 for printing moves
#define DEFAULT_RETRACT_ACCELERATION 2000 // X, Y, Z and E max acceleration in mm/s^2 for retracts
#define DEFAULT_TRAVEL_ACCELERATION 400 // X, Y, Z acceleration in mm/s^2 for travel (non printing) moves
......
MarlinKimbra/Configuration_adv.h
View file @ c260d3f4
......@@ -23,24 +23,38 @@
#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
/**
* Heating Sanity Check
*
* Whenever an M104 or M109 increases the target temperature this will wait for WATCH_TEMP_PERIOD milliseconds,
* and if the temperature hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted, requiring a
* hard reset. This test restarts with any M104/M109, but only if the current temperature is below the target
* by at least 2 * WATCH_TEMP_INCREASE degrees celsius.
* Thermal Protection parameters
*/
//#define WATCH_TEMP_PERIOD 16000 // 16 seconds
//#define WATCH_TEMP_INCREASE 4 // Heat up at least 4 degrees in 16 seconds
#ifdef THERMAL_PROTECTION_HOTENDS
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
/**
* Whenever an M104 or M109 increases the target temperature the firmware will wait for the
* WATCH_TEMP_PERIOD to expire, and if the temperature hasn't increased by WATCH_TEMP_INCREASE
* degrees, the machine is halted, requiring a hard reset. This test restarts with any M104/M109,
* but only if the current temperature is far enough below the target for a reliable test.
*/
#define WATCH_TEMP_PERIOD 16 // Seconds
#define WATCH_TEMP_INCREASE 4 // Degrees Celsius
#endif
#ifdef THERMAL_PROTECTION_BED
#define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds
#define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius
#endif
//automatic temperature: The hot end target temperature is calculated by all the buffered lines of gcode.
//The maximum buffered steps/sec of the extruder motor are called "se".
//You enter the autotemp mode by a M109 S<mintemp> B<maxtemp> F<factor>
// the target temperature is set to mintemp+factor*se[steps/sec] and limited by mintemp and maxtemp
// you exit the value by any M109 without F*
// Also, if the temperature is set to a value <mintemp, it is not changed by autotemp.
// on an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode
/**
* Automatic Temperature:
* The hotend target temperature is calculated by all the buffered lines of gcode.
* The maximum buffered steps/sec of the extruder motor is called "se".
* Start autotemp mode with M109 S<mintemp> B<maxtemp> F<factor>
* The target temperature is set to mintemp+factor*se[steps/sec] and is limited by
* mintemp and maxtemp. Turn this off by excuting M109 without F*
* Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp.
* On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode
*/
#define AUTOTEMP
#ifdef AUTOTEMP
#define AUTOTEMP_OLDWEIGHT 0.98
......@@ -50,11 +64,13 @@
//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
//#define SHOW_TEMP_ADC_VALUES
//extruder idle oozing prevention
//if the extruder motor is idle for more than SECONDS, and the temperature over MINTEMP,
//some filament is retracted. The filament retracted is re-added before the next extrusion
//or when the target temperature is less than EXTRUDE_MINTEMP and the actual temperature
//is greater than IDLE_OOZING_MINTEMP and less than IDLE_OOZING_FEEDRATE
/**
* extruder idle oozing prevention
* if the extruder motor is idle for more than SECONDS, and the temperature over MINTEMP,
* some filament is retracted. The filament retracted is re-added before the next extrusion
* or when the target temperature is less than EXTRUDE_MINTEMP and the actual temperature
* is greater than IDLE_OOZING_MINTEMP and less than IDLE_OOZING_FEEDRATE
*/
//#define IDLE_OOZING_PREVENT
#define IDLE_OOZING_MINTEMP EXTRUDE_MINTEMP + 5
#define IDLE_OOZING_MAXTEMP IDLE_OOZING_MINTEMP + 5
......@@ -214,6 +230,9 @@
// Default stepper release if idle. Set to 0 to deactivate.
#define DEFAULT_STEPPER_DEACTIVE_TIME 60
// Default step delay for any driver
//#define STEPPER_HIGH_LOW_DELAY 1 // Delay in microseconds
#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate
#define DEFAULT_MINTRAVELFEEDRATE 0.0
......@@ -284,7 +303,7 @@
//#define MENU_ADDAUTOSTART
// Show a progress bar on HD44780 LCDs for SD printing
#define LCD_PROGRESS_BAR
//#define LCD_PROGRESS_BAR
#ifdef LCD_PROGRESS_BAR
// Amount of time (ms) to show the bar
......@@ -297,8 +316,22 @@
//#define PROGRESS_MSG_ONCE
#endif
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
#endif // SDSUPPORT
// for dogm lcd displays you can choose some additional fonts:
#ifdef DOGLCD
// save 3120 bytes of PROGMEM by commenting out #define USE_BIG_EDIT_FONT
// we don't have a big font for Cyrillic, Kana
//#define USE_BIG_EDIT_FONT
// If you have spare 2300Byte of progmem and want to use a
// smaller font on the Info-screen uncomment the next line.
//#define USE_SMALL_INFOFONT
#endif // DOGLCD
// The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
//#define USE_WATCHDOG
......@@ -341,7 +374,7 @@
#define MM_PER_ARC_SEGMENT 1
#define N_ARC_CORRECTION 25
const unsigned int dropsegments=5; //everything with less than this number of steps will be ignored as move and joined with the next movement
const unsigned int dropsegments = 5; // everything with less than this number of steps will be ignored as move and joined with the next movement
// Control heater 0 and heater 1 in parallel.
//#define HEATERS_PARALLEL
......@@ -364,9 +397,10 @@ const unsigned int dropsegments=5; //everything with less than this number of st
#define BUFSIZE 4
// Bad Serial-connections can miss a received command by sending an 'ok'
// Therefore some clients go after 30 seconds in a timeout. Some other clients start sending commands while receiving a 'wait'.
// This wait is only send when the buffer is empty. The timeout-length is in milliseconds. 1000 is a good value.
#define NO_TIMEOUTS 1000
// Therefore some clients abort after 30 seconds in a timeout.
// Some other clients start sending commands while receiving a 'wait'.
// This "wait" is only sent when the buffer is empty. 1 second is a good value here.
#define NO_TIMEOUTS 1000 // Milliseconds
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
#define ADVANCED_OK
......@@ -389,7 +423,7 @@ const unsigned int dropsegments=5; //everything with less than this number of st
#define RETRACT_RECOVER_FEEDRATE 8 //default feedrate for recovering from retraction (mm/s)
#endif
// Add support for experimental filament exchange support M600; requires display
// Add support for filament exchange support M600; requires display
#ifdef ULTIPANEL
#define FILAMENTCHANGEENABLE
#ifdef FILAMENTCHANGEENABLE
......
MarlinKimbra/Makefile
View file @ c260d3f4
......@@ -266,8 +266,8 @@ VPATH += $(ARDUINO_INSTALL_DIR)/hardware/teensy/cores/teensy
endif
CXXSRC = WMath.cpp WString.cpp Print.cpp Marlin_main.cpp \
MarlinSerial.cpp Sd2Card.cpp SdBaseFile.cpp SdFatUtil.cpp \
SdFile.cpp SdVolume.cpp motion_control.cpp planner.cpp \
stepper.cpp temperature.cpp cardreader.cpp configuration_store.cpp \
SdFile.cpp SdVolume.cpp planner.cpp stepper.cpp \
temperature.cpp cardreader.cpp configuration_store.cpp \
watchdog.cpp SPI.cpp servo.cpp Tone.cpp ultralcd.cpp digipot_mcp4451.cpp \
vector_3.cpp qr_solve.cpp
ifeq ($(LIQUID_TWI2), 0)
......
MarlinKimbra/Marlin.h
View file @ c260d3f4
......@@ -23,6 +23,11 @@
#include <avr/pgmspace.h>
#include <avr/interrupt.h>
#include "Configuration.h"
#include "pins.h"
#ifndef SANITYCHECK_H
#error Your Configuration.h and Configuration_adv.h files are outdated!
#endif
#if (ARDUINO >= 100)
#include "Arduino.h"
......@@ -30,10 +35,19 @@
#include "WProgram.h"
#endif
// Macros for bit masks
#define BIT(b) (1<<(b))
#define TEST(n,b) (((n)&BIT(b))!=0)
#define SET_BIT(n,b,value) (n) ^= ((-value)^(n)) & (BIT(b))
// Macros for maths shortcuts
#define M_PI 3.1415926536
#define RADIANS(d) ((d)*M_PI/180.0)
#define DEGREES(r) ((d)*180.0/M_PI)
#define DEGREES(r) ((r)*180.0/M_PI)
#define SIN_60 0.8660254037844386
#define COS_60 0.5
// Macros to contrain values
#define NOLESS(v,n) do{ if (v < n) v = n; }while(0)
#define NOMORE(v,n) do{ if (v > n) v = n; }while(0)
......@@ -47,7 +61,8 @@ typedef unsigned long millis_t;
#include "comunication.h"
void get_command();
void process_commands();
void idle(bool ignore_stepper_queue = false);
void manage_inactivity(bool ignore_stepper_queue=false);
......@@ -135,37 +150,38 @@ void manage_inactivity(bool ignore_stepper_queue=false);
*/
enum AxisEnum {X_AXIS=0, Y_AXIS=1, A_AXIS=0, B_AXIS=1, Z_AXIS=2, E_AXIS=3, X_HEAD=4, Y_HEAD=5};
enum EndstopEnum {X_MIN=0, Y_MIN=1, Z_MIN=2, Z_PROBE=3, X_MAX=4, Y_MAX=5, Z_MAX=6, Z2_MIN=7, Z2_MAX=8};
void enable_all_steppers();
void disable_all_steppers();
void FlushSerialRequestResend();
void ClearToSend();
void ok_to_send();
void get_coordinates();
#ifdef DELTA
float probe_bed(float x, float y);
void set_delta_constants();
void home_delta_axis();
void calibration_report();
void bed_probe_all();
void set_default_z_probe_offset();
void set_delta_constants();
void save_carriage_positions(int position_num);
void calculate_delta(float cartesian[3]);
void adjust_delta(float cartesian[3]);
void prepare_move_raw();
extern float delta[3];
extern float delta_tmp[3];
extern float delta_tower1_x,delta_tower1_y;
extern float delta_tower2_x,delta_tower2_y;
extern float delta_tower3_x,delta_tower3_y;
float probe_bed(float x, float y);
void set_delta_constants();
void home_delta_axis();
void calibration_report();
void bed_probe_all();
void set_default_z_probe_offset();
void set_delta_constants();
void save_carriage_positions(int position_num);
void calculate_delta(float cartesian[3]);
void adjust_delta(float cartesian[3]);
void prepare_move_raw();
extern float delta[3];
extern float delta_tmp[3];
extern float delta_tower1_x, delta_tower1_y;
extern float delta_tower2_x, delta_tower2_y;
extern float delta_tower3_x, delta_tower3_y;
#endif
#ifdef SCARA
void calculate_delta(float cartesian[3]);
void calculate_SCARA_forward_Transform(float f_scara[3]);
#endif
void prepare_move();
void kill();
void kill(const char *);
void Stop();
#ifdef FILAMENT_RUNOUT_SENSOR
......@@ -237,6 +253,7 @@ extern float home_offset[3];
extern float tower_adj[6];
extern float delta_radius;
extern float delta_diagonal_rod;
extern float delta_segments_per_second;
#elif defined(Z_DUAL_ENDSTOPS)
extern float z_endstop_adj;
#endif
......@@ -253,7 +270,6 @@ extern float zprobe_zoffset;
// Lifetime stats
extern unsigned long printer_usage_seconds; //this can old about 136 year before go overflow. If you belive that you can live more than this please contact me.
extern millis_t config_last_update;
#ifdef PREVENT_DANGEROUS_EXTRUDE
extern float extrude_min_temp;
......@@ -306,6 +322,11 @@ extern int fanSpeed;
extern int laser_ttl_modulation;
#endif
#if defined(SDSUPPORT) && defined(SD_SETTINGS)
extern millis_t config_last_update;
extern bool config_readed;
#endif
extern millis_t print_job_start_ms;
extern millis_t print_job_stop_ms;
......
MarlinKimbra/Marlin_main.cpp
View file @ c260d3f4
This source diff could not be displayed because it is too large. You can view the blob instead.
MarlinKimbra/SdBaseFile.cpp
View file @ c260d3f4
......@@ -1097,8 +1097,9 @@ int16_t SdBaseFile::read(void* buf, uint16_t nbyte) {
fail:
return -1;
}
//------------------------------------------------------------------------------
/** Read the next directory entry from a directory file.
/**
* Read the next entry in a directory.
*
* \param[out] dir The dir_t struct that will receive the data.
*
......@@ -1114,50 +1115,38 @@ int8_t SdBaseFile::readDir(dir_t* dir, char* longFilename) {
if (!isDir() || (0X1F & curPosition_)) return -1;
//If we have a longFilename buffer, mark it as invalid. If we find a long filename it will be filled automaticly.
if (longFilename != NULL)
{
longFilename[0] = '\0';
}
if (longFilename != NULL) longFilename[0] = '\0';
while (1) {
n = read(dir, sizeof(dir_t));
if (n != sizeof(dir_t)) return n == 0 ? 0 : -1;
// last entry if DIR_NAME_FREE
if (dir->name[0] == DIR_NAME_FREE) return 0;
// skip empty entries and entry for . and ..
if (dir->name[0] == DIR_NAME_DELETED || dir->name[0] == '.') continue;
//Fill the long filename if we have a long filename entry,
// long filename entries are stored before the actual filename.
if (DIR_IS_LONG_NAME(dir) && longFilename != NULL)
{
vfat_t *VFAT = (vfat_t*)dir;
//Sanity check the VFAT entry. The first cluster is always set to zero. And th esequence number should be higher then 0
if (VFAT->firstClusterLow == 0 && (VFAT->sequenceNumber & 0x1F) > 0 && (VFAT->sequenceNumber & 0x1F) <= MAX_VFAT_ENTRIES)
{
//TODO: Store the filename checksum to verify if a none-long filename aware system modified the file table.
n = ((VFAT->sequenceNumber & 0x1F) - 1) * FILENAME_LENGTH;
longFilename[n+0] = VFAT->name1[0];
longFilename[n+1] = VFAT->name1[1];
longFilename[n+2] = VFAT->name1[2];
longFilename[n+3] = VFAT->name1[3];
longFilename[n+4] = VFAT->name1[4];
longFilename[n+5] = VFAT->name2[0];
longFilename[n+6] = VFAT->name2[1];
longFilename[n+7] = VFAT->name2[2];
longFilename[n+8] = VFAT->name2[3];
longFilename[n+9] = VFAT->name2[4];
longFilename[n+10] = VFAT->name2[5];
longFilename[n+11] = VFAT->name3[0];
longFilename[n+12] = VFAT->name3[1];
//If this VFAT entry is the last one, add a NUL terminator at the end of the string
if (VFAT->sequenceNumber & 0x40)
longFilename[n+FILENAME_LENGTH] = '\0';
}
// Fill the long filename if we have a long filename entry.
// Long filename entries are stored before the short filename.
if (longFilename != NULL && DIR_IS_LONG_NAME(dir)) {
vfat_t *VFAT = (vfat_t*)dir;
// Sanity-check the VFAT entry. The first cluster is always set to zero. And the sequence number should be higher than 0
if (VFAT->firstClusterLow == 0 && (VFAT->sequenceNumber & 0x1F) > 0 && (VFAT->sequenceNumber & 0x1F) <= MAX_VFAT_ENTRIES) {
// TODO: Store the filename checksum to verify if a none-long filename aware system modified the file table.
n = ((VFAT->sequenceNumber & 0x1F) - 1) * FILENAME_LENGTH;
for (uint8_t i=0; i<FILENAME_LENGTH; i++)
longFilename[n+i] = (i < 5) ? VFAT->name1[i] : (i < 11) ? VFAT->name2[i-5] : VFAT->name3[i-11];
// If this VFAT entry is the last one, add a NUL terminator at the end of the string
if (VFAT->sequenceNumber & 0x40) longFilename[n+FILENAME_LENGTH] = '\0';
}
}
// return if normal file or subdirectory
// Return if normal file or subdirectory
if (DIR_IS_FILE_OR_SUBDIR(dir)) return n;
}
}
//------------------------------------------------------------------------------
// Read next directory entry into the cache
// Assumes file is correctly positioned
......
MarlinKimbra/cardreader.cpp
View file @ c260d3f4
......@@ -20,6 +20,7 @@ CardReader::CardReader() {
autostart_stilltocheck = true; //the SD start is delayed, because otherwise the serial cannot answer fast enough to make contact with the host software.
autostart_index = 0;
//power to SD reader
#if SDPOWER > -1
OUT_WRITE(SDPOWER, HIGH);
......@@ -39,24 +40,43 @@ char *createFilename(char *buffer, const dir_t &p) { //buffer > 12characters
return buffer;
}
/**
* Dive into a folder and recurse depth-first to perform a pre-set operation lsAction:
* LS_Count - Add +1 to nrFiles for every file within the parent
* LS_GetFilename - Get the filename of the file indexed by nrFiles
* LS_SerialPrint - Print the full path of each file to serial output
*/
void CardReader::lsDive(const char *prepend, SdFile parent, const char * const match/*=NULL*/) {
dir_t p;
uint8_t cnt = 0;
// Read the next entry from a directory
while (parent.readDir(p, longFilename) > 0) {
if (DIR_IS_SUBDIR(&p) && lsAction != LS_Count && lsAction != LS_GetFilename) { // hence LS_SerialPrint
char path[FILENAME_LENGTH*2];
// If the entry is a directory and the action is LS_SerialPrint
if (DIR_IS_SUBDIR(&p) && lsAction != LS_Count && lsAction != LS_GetFilename) {
// Allocate enough stack space for the full path to a folder
int len = strlen(prepend) + FILENAME_LENGTH + 1;
char path[len];
// Get the short name for the item, which we know is a folder
char lfilename[FILENAME_LENGTH];
createFilename(lfilename, p);
path[0] = 0;
if (prepend[0] == 0) strcat(path, "/"); //avoid leading / if already in prepend
// Append the FOLDERNAME12/ to the passed string.
// It contains the full path to the "parent" argument.
// We now have the full path to the item in this folder.
path[0] = '\0';
if (prepend[0] == '\0') strcat(path, "/"); // a root slash if prepend is empty
strcat(path, prepend);
strcat(path, lfilename);
strcat(path, "/");
//Serial.print(path);
// Serial.print(path);
// Get a new directory object using the full path
// and dive recursively into it.
SdFile dir;
if (!dir.open(parent, lfilename, O_READ)) {
if (lsAction == LS_SerialPrint) {
......@@ -64,14 +84,13 @@ void CardReader::lsDive(const char *prepend, SdFile parent, const char * const m
}
}
lsDive(path, dir);
//close done automatically by destructor of SdFile
// close() is done automatically by destructor of SdFile
}
else {
char pn0 = p.name[0];
if (pn0 == DIR_NAME_FREE) break;
if (pn0 == DIR_NAME_DELETED || pn0 == '.') continue;
char lf0 = longFilename[0];
if (lf0 == '.') continue;
if (longFilename[0] == '.') continue;
if (!DIR_IS_FILE_OR_SUBDIR(&p)) continue;
......@@ -79,24 +98,26 @@ void CardReader::lsDive(const char *prepend, SdFile parent, const char * const m
if (!filenameIsDir && (p.name[8] != 'G' || p.name[9] == '~')) continue;
//if (cnt++ != nr) continue;
createFilename(filename, p);
if (lsAction == LS_SerialPrint) {
ECHO_V(prepend);
ECHO_EV(filename);
}
else if (lsAction == LS_Count) {
nrFiles++;
}
else if (lsAction == LS_GetFilename) {
if (match != NULL) {
if (strcasecmp(match, filename) == 0) return;
}
else if (cnt == nrFiles) return;
cnt++;
switch (lsAction) {
case LS_Count:
nrFiles++;
break;
case LS_SerialPrint:
createFilename(filename, p);
ECHO_V(prepend);
ECHO_EV(filename);
break;
case LS_GetFilename:
createFilename(filename, p);
if (match != NULL) {
if (strcasecmp(match, filename) == 0) return;
}
else if (cnt == nrFiles) return;
cnt++;
break;
}
}
}
} // while readDir
}
void CardReader::ls() {
......@@ -105,6 +126,67 @@ void CardReader::ls() {
lsDive("", root);
}
#ifdef LONG_FILENAME_HOST_SUPPORT
/**
* Get a long pretty path based on a DOS 8.3 path
*/
void CardReader::printLongPath(char *path) {
lsAction = LS_GetFilename;
int i, pathLen = strlen(path);
// ECHO_M("Full Path: "); ECHO_EV(path);
// Zero out slashes to make segments
for (i = 0; i < pathLen; i++) if (path[i] == '/') path[i] = '\0';
SdFile diveDir = root; // start from the root for segment 1
for (i = 0; i < pathLen;) {
if (path[i] == '\0') i++; // move past a single nul
char *segment = &path[i]; // The segment after most slashes
// If a segment is empty (extra-slash) then exit
if (!*segment) break;
// Go to the next segment
while (path[++i]) { }
// ECHO_M("Looking for segment: "); ECHO_EV(segment);
// Find the item, setting the long filename
diveDir.rewind();
lsDive("", diveDir, segment);
// Print /LongNamePart to serial output
ECHO_C('/');
ECHO_V(longFilename[0] ? longFilename : "???");
// If the filename was printed then that's it
if (!filenameIsDir) break;
// ECHO_M("Opening dir: "); ECHO_EV(segment);
// Open the sub-item as the new dive parent
SdFile dir;
if (!dir.open(diveDir, segment, O_READ)) {
ECHO_E;
ECHO_SMV(DB, MSG_SD_CANT_OPEN_SUBDIR, segment);
break;
}
diveDir.close();
diveDir = dir;
} // while i<pathLen
ECHO_E;
}
#endif // LONG_FILENAME_HOST_SUPPORT
void CardReader::initsd() {
cardOK = false;
if (root.isOpen()) root.close();
......@@ -120,7 +202,7 @@ void CardReader::initsd() {
&& !card.init(SPI_SPEED, LCD_SDSS)
#endif
) {
ECHO_LM(ER, MSG_SD_INIT_FAIL);
ECHO_LM(DB, MSG_SD_INIT_FAIL);
}
else if (!volume.init(&card)) {
ECHO_LM(ER, MSG_SD_VOL_INIT_FAIL);
......@@ -130,14 +212,15 @@ void CardReader::initsd() {
}
else {
cardOK = true;
ECHO_LM(OK, MSG_SD_CARD_OK);
ECHO_LM(DB, MSG_SD_CARD_OK);
}
workDir = root;
curDir = &root;
/*if (!workDir.openRoot(&volume)) {
/*
if (!workDir.openRoot(&volume)) {
ECHO_EM(MSG_SD_WORKDIR_FAIL);
}*/
}
*/
}
void CardReader::setroot() {
......@@ -187,19 +270,29 @@ void CardReader::openFile(char* name, bool read, bool replace_current/*=true*/,
if (!replace_current) {
if (file_subcall_ctr > SD_PROCEDURE_DEPTH - 1) {
ECHO_LMV(ER, MSG_SD_MAX_DEPTH, SD_PROCEDURE_DEPTH);
kill();
kill(PSTR(MSG_KILLED));
return;
}
ECHO_SMV(DB, "SUBROUTINE CALL target:\"", name);
ECHO_M("\" parent:\"");
//store current filename and position
getAbsFilename(filenames[file_subcall_ctr]);
ECHO_V(filenames[file_subcall_ctr]);
ECHO_EMV("\" pos", sdpos);
filespos[file_subcall_ctr] = sdpos;
file_subcall_ctr++;
}
else {
ECHO_LMV(DB, "Now doing file: ", name);
}
file.close();
}
else { //opening fresh file
file_subcall_ctr = 0; //resetting procedure depth in case user cancels print while in procedure
else { // opening fresh file
file_subcall_ctr = 0; // resetting procedure depth in case user cancels print while in procedure
ECHO_LMV(DB, "Now fresh file: ", name);
}
sdprinting = false;
......@@ -210,22 +303,28 @@ void CardReader::openFile(char* name, bool read, bool replace_current/*=true*/,
char *dirname_start, *dirname_end;
if (name[0] == '/') {
dirname_start = &name[1];
while(dirname_start > 0) {
while (dirname_start > 0) {
dirname_end = strchr(dirname_start, '/');
if (dirname_end > 0 && dirname_end > dirname_start) {
char subdirname[FILENAME_LENGTH];
strncpy(subdirname, dirname_start, dirname_end - dirname_start);
subdirname[dirname_end - dirname_start] = 0;
ECHO_EV(subdirname);
if (!myDir.open(curDir, subdirname, O_READ)) {
ECHO_LMV(ER, MSG_SD_OPEN_FILE_FAIL, subdirname);
return;
}
else {
//ECHO_EM("dive ok");
}
curDir = &myDir;
dirname_start = dirname_end + 1;
}
else { // the remainder after all /fsa/fdsa/ is the filename
fname = dirname_start;
//ECHO_EM("remainder");
//ECHO_EV(fname);
break;
}
}
......@@ -237,24 +336,28 @@ void CardReader::openFile(char* name, bool read, bool replace_current/*=true*/,
if (read) {
if (file.open(curDir, fname, O_READ)) {
filesize = file.fileSize();
ECHO_SMV(OK,MSG_SD_FILE_OPENED, fname);
ECHO_MV(MSG_SD_FILE_OPENED, fname);
ECHO_EMV(MSG_SD_SIZE, filesize);
sdpos = 0;
ECHO_EM(MSG_SD_FILE_SELECTED);
getfilename(0, fname);
if(lcd_status) lcd_setstatus(longFilename[0] ? longFilename : fname);
}
else {
ECHO_LMV(ER,MSG_SD_OPEN_FILE_FAIL,fname);
ECHO_MV(MSG_SD_OPEN_FILE_FAIL, fname);
ECHO_PGM(".\n");
}
}
else { //write
if (file.open(curDir, fname, O_CREAT | O_APPEND | O_WRITE | O_TRUNC)) {
saving = true;
ECHO_LMV(OK, MSG_SD_WRITE_TO_FILE, name);
if(lcd_status) lcd_setstatus(fname);
if (!file.open(curDir, fname, O_CREAT | O_APPEND | O_WRITE | O_TRUNC)) {
ECHO_MV(MSG_SD_OPEN_FILE_FAIL, fname);
ECHO_PGM(".\n");
}
else {
ECHO_LMV(ER, MSG_SD_OPEN_FILE_FAIL,fname);
saving = true;
ECHO_EMV(MSG_SD_WRITE_TO_FILE, name);
if(lcd_status) lcd_setstatus(fname);
}
}
}
......@@ -278,8 +381,10 @@ void CardReader::removeFile(char* name) {
char subdirname[FILENAME_LENGTH];
strncpy(subdirname, dirname_start, dirname_end - dirname_start);
subdirname[dirname_end - dirname_start] = 0;
ECHO_EV(subdirname);
if (!myDir.open(curDir, subdirname, O_READ)) {
ECHO_LMV(ER, MSG_SD_OPEN_FILE_FAIL, subdirname);
ECHO_MV(MSG_SD_OPEN_FILE_FAIL, subdirname);
ECHO_C('.');
return;
}
......@@ -297,21 +402,22 @@ void CardReader::removeFile(char* name) {
}
if (file.remove(curDir, fname)) {
ECHO_LMV(OK, MSG_SD_FILE_DELETED, fname);
ECHO_EMV(MSG_SD_FILE_DELETED, fname);
sdpos = 0;
}
else {
ECHO_LMV(ER, MSG_SD_FILE_DELETION_ERR,fname);
ECHO_MV(MSG_SD_FILE_DELETION_ERR, fname);
ECHO_C('.');
}
}
void CardReader::getStatus() {
if (cardOK) {
ECHO_SMV(OK, MSG_SD_PRINTING_BYTE, sdpos);
ECHO_MV(MSG_SD_PRINTING_BYTE, sdpos);
ECHO_EMV(MSG_SD_SLASH, filesize);
}
else {
ECHO_LM(OK, MSG_SD_NOT_PRINTING);
ECHO_EM(MSG_SD_NOT_PRINTING);
}
}
......@@ -345,7 +451,7 @@ void CardReader::checkautostart(bool force) {
if (!cardOK) return; // fail
}
char autoname[30];
char autoname[10];
sprintf_P(autoname, PSTR("auto%i.g"), autostart_index);
for (int8_t i = 0; i < (int8_t)strlen(autoname); i++) autoname[i] = tolower(autoname[i]);
......@@ -357,7 +463,7 @@ void CardReader::checkautostart(bool force) {
while (root.readDir(p, NULL) > 0) {
for (int8_t i = 0; i < (int8_t)strlen((char*)p.name); i++) p.name[i] = tolower(p.name[i]);
if (p.name[9] != '~' && strncmp((char*)p.name, autoname, 5) == 0) {
char cmd[30];
char cmd[4 + (FILENAME_LENGTH + 1) * MAX_DIR_DEPTH + 2];
sprintf_P(cmd, PSTR("M23 %s"), autoname);
enqueuecommand(cmd);
enqueuecommands_P(PSTR("M24"));
......@@ -504,22 +610,22 @@ void CardReader::chdir(const char * relpath) {
if (workDir.isOpen()) parent = &workDir;
if (newfile.open(*parent, relpath, O_READ)) {
if (!newfile.open(*parent, relpath, O_READ)) {
ECHO_LMV(ER, MSG_SD_CANT_ENTER_SUBDIR, relpath);
}
else {
if (workDirDepth < MAX_DIR_DEPTH) {
workDirDepth++;
++workDirDepth;
for (int d = workDirDepth; d--;) workDirParents[d + 1] = workDirParents[d];
workDirParents[0] = *parent;
}
workDir = newfile;
}
else {
ECHO_LMV(ER, MSG_SD_CANT_ENTER_SUBDIR, relpath);
}
}
void CardReader::updir() {
if (workDirDepth > 0) {
workDirDepth--;
--workDirDepth;
workDir = workDirParents[0];
for (uint16_t d = 0; d < workDirDepth; d++)
workDirParents[d] = workDirParents[d+1];
......
MarlinKimbra/cardreader.h
View file @ c260d3f4
......@@ -18,7 +18,7 @@ public:
//this is to delay autostart and hence the initialisaiton of the sd card to some seconds after the normal init, so the device is available quick after a reset
void checkautostart(bool x);
void openFile(char* name, bool read, bool replace_current = true, bool lcd_status = true);
void openFile(char* name,bool read,bool replace_current=true,bool lcd_status=true);
void openLogFile(char* name);
void removeFile(char* name);
void closeFile(bool store_location = false);
......@@ -30,6 +30,10 @@ public:
void getStatus();
void printingHasFinished();
#ifdef LONG_FILENAME_HOST_SUPPORT
void printLongPath(char *path);
#endif
void getfilename(uint16_t nr, const char* const match = NULL);
uint16_t getnrfilenames();
......
MarlinKimbra/comunication.h
View file @ c260d3f4
/**
* Comunication.h - serial messages functions
* Part of Marlin
* Part of MarlinKimbra
*
* Author: Simone Primarosa
*/
......@@ -39,6 +39,7 @@
#endif
#endif
<<<<<<< HEAD
#define START "start" //start for host
#define OK "ok" //ok answer for host
#define ER "Error:" //error for host
......@@ -48,6 +49,17 @@
#define PAUSE "//action:pause" //command for host that support action
#define RESUME "//action:resume" //command for host that support action
#define DISCONNECT "//action:disconnect" //command for host that support action
=======
#define START "start" //start for host
#define OK "ok " //ok answer for host
#define ER "Error: " //error for host
#define WT "wait" //wait for host
#define DB "echo: " //message for user
#define RS "Resend: " //resend for host
#define PAUSE "//action:pause" //command for host that support action
#define RESUME "//action:resume" //command for host that support action
#define DISCONNECT "//action:disconnect" //command for host that support action
>>>>>>> origin/Development
#define SERIAL_INIT(baud) MYSERIAL.begin(baud), delay(1)
#define SERIAL_WRITE(x) MYSERIAL.write(x)
......@@ -56,7 +68,10 @@
FORCE_INLINE void PS_PGM(const char *str) {
char ch;
while ((ch = pgm_read_byte(str++))) { SERIAL_WRITE(ch); }
while ((ch = pgm_read_byte(str))) {
MYSERIAL.write(ch);
str++;
}
}
#define ECHO_ENDL SERIAL_ENDL
......@@ -65,8 +80,8 @@ FORCE_INLINE void PS_PGM(const char *str) {
#define ECHO_MV(msg, val, args...) ECHO_PGM(msg),ECHO_V(val, ##args)
#define ECHO_VM(val, msg, args...) ECHO_V(val, ##args),ECHO_PGM(msg)
#define ECHO_M(msg) ECHO_PGM(msg)
#define ECHO_V SERIAL_PRINT
#define ECHO_C SERIAL_WRITE
#define ECHO_V(msg, args...) SERIAL_PRINT(msg, ##args)
#define ECHO_C(x) SERIAL_WRITE(x)
#define ECHO_S(srt) ECHO_PGM(srt)
#define ECHO_SM(srt, msg) ECHO_S(srt),ECHO_M(msg)
......
MarlinKimbra/conditionals.h
View file @ c260d3f4
......@@ -4,161 +4,376 @@
*/
#ifndef CONDITIONALS_H
#ifndef M_PI
#define M_PI 3.1415926536
#endif
#ifndef CONFIGURATION_LCD // Get the LCD defines which are needed first
#define CONFIGURATION_LCD
#ifndef CONFIGURATION_LCD // Get the LCD defines which are needed first
#define PIN_EXISTS(PN) (defined(PN##_PIN) && PN##_PIN >= 0)
#define PIN_EXISTS(PN) (defined(PN##_PIN) && PN##_PIN >= 0)
#ifdef MAKRPANEL
#define DOGLCD
#define SDSUPPORT
#define DEFAULT_LCD_CONTRAST 17
#define ULTIPANEL
#define NEWPANEL
#endif
#define CONFIGURATION_LCD
#if defined(miniVIKI) || defined(VIKI2) || defined(ELB_FULL_GRAPHIC_CONTROLLER)
#define ULTRA_LCD //general LCD support, also 16x2
#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
#define ULTIMAKERCONTROLLER //as available from the Ultimaker online store.
#ifdef miniVIKI
#define DEFAULT_LCD_CONTRAST 95
#elif defined(VIKI2)
#define DEFAULT_LCD_CONTRAST 40
#elif defined(ELB_FULL_GRAPHIC_CONTROLLER)
#define DEFAULT_LCD_CONTRAST 110
#define SDCARDDETECTINVERTED
#define SDSLOW
#define U8GLIB_LM6059_AF
#endif
#if defined(MAKRPANEL)
#define DOGLCD
#define SDSUPPORT
#define DEFAULT_LCD_CONTRAST 17
#define ULTIPANEL
#define NEWPANEL
#endif
#define ENCODER_PULSES_PER_STEP 4
#define ENCODER_STEPS_PER_MENU_ITEM 1
#endif
#if defined(miniVIKI) || defined(VIKI2)
#define ULTRA_LCD //general LCD support, also 16x2
#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
#define ULTIMAKERCONTROLLER //as available from the Ultimaker online store.
// Generic support for SSD1306 OLED based LCDs.
#if defined(U8GLIB_SSD1306)
#define ULTRA_LCD //general LCD support, also 16x2
#define DOGLCD // Support for I2C LCD 128x64 (Controller SSD1306 graphic Display Family)
#endif
#ifdef miniVIKI
#define DEFAULT_LCD_CONTRAST 95
#else
#define DEFAULT_LCD_CONTRAST 40
#ifdef PANEL_ONE
#define SDSUPPORT
#define ULTIMAKERCONTROLLER
#endif
#define ENCODER_PULSES_PER_STEP 4
#define ENCODER_STEPS_PER_MENU_ITEM 1
#endif
#ifdef REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
#define DOGLCD
#define U8GLIB_ST7920
#define REPRAP_DISCOUNT_SMART_CONTROLLER
#endif
#ifdef PANEL_ONE
#define SDSUPPORT
#define ULTIMAKERCONTROLLER
#endif
#if defined(ULTIMAKERCONTROLLER) || defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL)
#define ULTIPANEL
#define NEWPANEL
#endif
#ifdef REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
#define DOGLCD
#define U8GLIB_ST7920
#define REPRAP_DISCOUNT_SMART_CONTROLLER
#endif
#ifdef RADDS_DISPLAY
#define ENCODER_PULSES_PER_STEP 2
#define ENCODER_STEPS_PER_MENU_ITEM 1
#define ULTIPANEL
#define NEWPANEL
#endif
#if defined(ULTIMAKERCONTROLLER) || defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL)
#define ULTIPANEL
#define NEWPANEL
#endif
#ifdef REPRAPWORLD_KEYPAD
#define ULTIPANEL
#define NEWPANEL
#endif
#if defined(RADDS_DISPLAY)
#define ENCODER_PULSES_PER_STEP 2
#define ENCODER_STEPS_PER_MENU_ITEM 1
#define ULTIPANEL
#define NEWPANEL
#endif
#ifdef RA_CONTROL_PANEL
#define LCD_I2C_TYPE_PCA8574
#define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander
#define ULTIPANEL
#define NEWPANEL
#endif
#ifdef REPRAPWORLD_KEYPAD
#define ULTIPANEL
#define NEWPANEL
#endif
/**
* I2C PANELS
*/
#ifdef LCD_I2C_SAINSMART_YWROBOT
// This uses the LiquidCrystal_I2C library ( https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home )
// Make sure it is placed in the Arduino libraries directory.
#define LCD_I2C_TYPE_PCF8575
#define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander
#define ULTIPANEL
#define NEWPANEL
#endif
#ifdef RA_CONTROL_PANEL
#define LCD_I2C_TYPE_PCA8574
#define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander
#define ULTIPANEL
#define NEWPANEL
#endif
// PANELOLU2 LCD with status LEDs, separate encoder and click inputs
#ifdef LCD_I2C_PANELOLU2
// This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 )
// Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory.
// (v1.2.3 no longer requires you to define PANELOLU in the LiquidTWI2.h library header file)
// Note: The PANELOLU2 encoder click input can either be directly connected to a pin
// (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1).
#define LCD_I2C_TYPE_MCP23017
#define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
#define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD
#if !defined(ENCODER_PULSES_PER_STEP)
#define ENCODER_PULSES_PER_STEP 4
#endif
/**
* I2C PANELS
*/
#if !defined(ENCODER_STEPS_PER_MENU_ITEM)
#define ENCODER_STEPS_PER_MENU_ITEM 1
#endif
#ifdef LCD_I2C_SAINSMART_YWROBOT
// This uses the LiquidCrystal_I2C library ( https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home )
// Make sure it is placed in the Arduino libraries directory.
#define LCD_I2C_TYPE_PCF8575
#define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander
#define ULTIPANEL
#define NEWPANEL
#endif
#ifdef LCD_USE_I2C_BUZZER
#define LCD_FEEDBACK_FREQUENCY_HZ 1000
#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
#endif
// PANELOLU2 LCD with status LEDs, separate encoder and click inputs
#ifdef LCD_I2C_PANELOLU2
// This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 )
// Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory.
// (v1.2.3 no longer requires you to define PANELOLU in the LiquidTWI2.h library header file)
// Note: The PANELOLU2 encoder click input can either be directly connected to a pin
// (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1).
#define LCD_I2C_TYPE_MCP23017
#define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
#define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD
#ifndef ENCODER_PULSES_PER_STEP
#define ENCODER_PULSES_PER_STEP 4
#define ULTIPANEL
#define NEWPANEL
#endif
#ifndef ENCODER_STEPS_PER_MENU_ITEM
#define ENCODER_STEPS_PER_MENU_ITEM 1
// Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs
#ifdef LCD_I2C_VIKI
// This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 )
// Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory.
// Note: The pause/stop/resume LCD button pin should be connected to the Arduino
// BTN_ENC pin (or set BTN_ENC to -1 if not used)
#define LCD_I2C_TYPE_MCP23017
#define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
#define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later)
#define ULTIPANEL
#define NEWPANEL
#endif
#ifdef LCD_USE_I2C_BUZZER
#define LCD_FEEDBACK_FREQUENCY_HZ 1000
#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
// Shift register panels
// ---------------------
// 2 wire Non-latching LCD SR from:
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
#ifdef SAV_3DLCD
#define SR_LCD_2W_NL // Non latching 2 wire shiftregister
#define ULTIPANEL
#define NEWPANEL
#endif
#define ULTIPANEL
#define NEWPANEL
#endif
#ifdef ULTIPANEL
#define NEWPANEL //enable this if you have a click-encoder panel
#define SDSUPPORT
#define ULTRA_LCD
#ifdef DOGLCD // Change number of lines to match the DOG graphic display
#define LCD_WIDTH 22
#define LCD_HEIGHT 5
#else
#define LCD_WIDTH 20
#define LCD_HEIGHT 4
#endif
#else //no panel but just LCD
#ifdef ULTRA_LCD
#ifdef DOGLCD // Change number of lines to match the 128x64 graphics display
#define LCD_WIDTH 22
#define LCD_HEIGHT 5
#else
#define LCD_WIDTH 16
#define LCD_HEIGHT 2
#endif
#endif
#endif
// Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs
#ifdef LCD_I2C_VIKI
// This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 )
// Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory.
// Note: The pause/stop/resume LCD button pin should be connected to the Arduino
// BTN_ENC pin (or set BTN_ENC to -1 if not used)
#define LCD_I2C_TYPE_MCP23017
#define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
#define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later)
#define ULTIPANEL
#define NEWPANEL
#endif
#ifdef DOGLCD
/* Custom characters defined in font font_6x10_marlin_symbols */
// \x00 intentionally skipped to avoid problems in strings
#define LCD_STR_REFRESH "\x01"
#define LCD_STR_FOLDER "\x02"
#define LCD_STR_ARROW_RIGHT "\x03"
#define LCD_STR_UPLEVEL "\x04"
#define LCD_STR_CLOCK "\x05"
#define LCD_STR_FEEDRATE "\x06"
#define LCD_STR_BEDTEMP "\x07"
#define LCD_STR_THERMOMETER "\x08"
#define LCD_STR_DEGREE "\x09"
#define LCD_STR_SPECIAL_MAX '\x09'
// Maximum here is 0x1f because 0x20 is ' ' (space) and the normal charsets begin.
// Better stay below 0x10 because DISPLAY_CHARSET_HD44780_WESTERN begins here.
#else
/* Custom characters defined in the first 8 characters of the LCD */
#define LCD_STR_BEDTEMP "\x00" // this will have 'unexpected' results when used in a string!
#define LCD_STR_DEGREE "\x01"
#define LCD_STR_THERMOMETER "\x02"
#define LCD_STR_UPLEVEL "\x03"
#define LCD_STR_REFRESH "\x04"
#define LCD_STR_FOLDER "\x05"
#define LCD_STR_FEEDRATE "\x06"
#define LCD_STR_CLOCK "\x07"
#define LCD_STR_ARROW_RIGHT ">" /* from the default character set */
#endif
/**
* Default LCD contrast for dogm-like LCD displays
*/
#if defined(DOGLCD) && !defined(DEFAULT_LCD_CONTRAST)
#define DEFAULT_LCD_CONTRAST 32
#endif
// Shift register panels
// ---------------------
// 2 wire Non-latching LCD SR from:
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
#ifdef DOGLCD
#define HAS_LCD_CONTRAST
#ifdef U8GLIB_ST7920
#undef HAS_LCD_CONTRAST
#endif
#ifdef U8GLIB_SSD1306
#undef HAS_LCD_CONTRAST
#endif
#endif
#ifdef SAV_3DLCD
#define SR_LCD_2W_NL // Non latching 2 wire shiftregister
#define ULTIPANEL
#define NEWPANEL
#endif
/**
* LCD BUZZ
*/
#define HAS_LCD_BUZZ (defined(ULTRALCD) || (defined(BEEPER) && BEEPER >= 0) || defined(LCD_USE_I2C_BUZZER))
/**
* SPLASH_SCREEN_DURATION for no DOGLCD display
*/
#if !defined(DOGLCD)
#undef SPLASH_SCREEN_DURATION
#define SPLASH_SCREEN_DURATION 500
#endif
#else // CONFIGURATION_LCD
#define CONDITIONALS_H
#ifdef ULTIPANEL
#define NEWPANEL //enable this if you have a click-encoder panel
#define SDSUPPORT
#define ULTRA_LCD
#ifdef DOGLCD // Change number of lines to match the DOG graphic display
#define LCD_WIDTH 22
#define LCD_HEIGHT 5
/**
* SINGLENOZZLE
*/
#ifdef SINGLENOZZLE
#define HOTENDS 1
#undef TEMP_SENSOR_1_AS_REDUNDANT
#else
#define LCD_WIDTH 20
#define LCD_HEIGHT 4
#define HOTENDS EXTRUDERS
#endif
#else //no panel but just LCD
#ifdef ULTRA_LCD
#ifdef DOGLCD // Change number of lines to match the 128x64 graphics display
#define LCD_WIDTH 22
#define LCD_HEIGHT 5
/**
* DRIVER_EXTRUDERS
*/
#if !defined(MKR4) && !defined(NPR2)
#define DRIVER_EXTRUDERS EXTRUDERS // This defines the number of Driver extruder
#endif
#ifndef __SAM3X8E__
#ifndef AT90USB
#define HardwareSerial_h // trick to disable the standard HWserial
#endif
#endif
#if (ARDUINO >= 100)
#include "Arduino.h"
#else
#include "WProgram.h"
#endif
#include "pins.h"
/**
* ENDSTOPPULLUPS
*/
#ifdef ENDSTOPPULLUPS
#define ENDSTOPPULLUP_XMAX
#define ENDSTOPPULLUP_YMAX
#define ENDSTOPPULLUP_ZMAX
#define ENDSTOPPULLUP_XMIN
#define ENDSTOPPULLUP_YMIN
#define ENDSTOPPULLUP_ZMIN
#define ENDSTOPPULLUP_EMIN
#define ENDSTOPPULLUP_ZPROBE
#endif
/**
* ENDSTOP LOGICAL
*/
#if MB(ALLIGATOR)
#define X_MIN_ENDSTOP_INVERTING !X_MIN_ENDSTOP_LOGIC
#define Y_MIN_ENDSTOP_INVERTING !Y_MIN_ENDSTOP_LOGIC
#define Z_MIN_ENDSTOP_INVERTING !Z_MIN_ENDSTOP_LOGIC
#define Z2_MIN_ENDSTOP_INVERTING !Z2_MIN_ENDSTOP_LOGIC
#define E_MIN_ENDSTOP_INVERTING !E_MIN_ENDSTOP_LOGIC
#define X_MAX_ENDSTOP_INVERTING !X_MAX_ENDSTOP_LOGIC
#define Y_MAX_ENDSTOP_INVERTING !Y_MAX_ENDSTOP_LOGIC
#define Z_MAX_ENDSTOP_INVERTING !Z_MAX_ENDSTOP_LOGIC
#define Z2_MAX_ENDSTOP_INVERTING !Z2_MAX_ENDSTOP_LOGIC
#define Z_PROBE_ENDSTOP_INVERTING !Z_PROBE_ENDSTOP_LOGIC
#else
#define X_MIN_ENDSTOP_INVERTING X_MIN_ENDSTOP_LOGIC
#define Y_MIN_ENDSTOP_INVERTING Y_MIN_ENDSTOP_LOGIC
#define Z_MIN_ENDSTOP_INVERTING Z_MIN_ENDSTOP_LOGIC
#define Z2_MIN_ENDSTOP_INVERTING Z2_MIN_ENDSTOP_LOGIC
#define E_MIN_ENDSTOP_INVERTING E_MIN_ENDSTOP_LOGIC
#define X_MAX_ENDSTOP_INVERTING X_MAX_ENDSTOP_LOGIC
#define Y_MAX_ENDSTOP_INVERTING Y_MAX_ENDSTOP_LOGIC
#define Z_MAX_ENDSTOP_INVERTING Z_MAX_ENDSTOP_LOGIC
#define Z2_MAX_ENDSTOP_INVERTING Z2_MAX_ENDSTOP_LOGIC
#define Z_PROBE_ENDSTOP_INVERTING Z_PROBE_ENDSTOP_LOGIC
#endif
/**
* Firmware Test
*/
#ifdef FIRMWARE_TEST
#undef BAUDRATE
#define BAUDRATE 115200 // Baudrate setting to 115200 because serial monitor arduino function at max 115200 baudrate.
#endif
/**
* Axis lengths
*/
#define X_MAX_LENGTH (X_MAX_POS - X_MIN_POS)
#define Y_MAX_LENGTH (Y_MAX_POS - Y_MIN_POS)
#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS)
/**
* SCARA
*/
#ifdef SCARA
#undef SLOWDOWN
#define QUICK_HOME //SCARA needs Quickhome
#endif
/**
* DELTA
*/
#ifdef DELTA
#undef SLOWDOWN //DELTA not needs SLOWDOWN
#define AUTOLEVEL_GRID_MULTI 1/AUTOLEVEL_GRID
// DELTA must have same valour for 3 axis endstop hits
#undef Y_HOME_BUMP_MM
#undef Z_HOME_BUMP_MM
#define Y_HOME_BUMP_MM X_HOME_BUMP_MM
#define Z_HOME_BUMP_MM X_HOME_BUMP_MM
#endif
/**
* AUTOSET LOCATIONS OF LIMIT SWITCHES
* Added by ZetaPhoenix 09-15-2012
*/
#ifdef MANUAL_HOME_POSITIONS // Use manual limit switch locations
#define X_HOME_POS MANUAL_X_HOME_POS
#define Y_HOME_POS MANUAL_Y_HOME_POS
#define Z_HOME_POS MANUAL_Z_HOME_POS
#else //!MANUAL_HOME_POSITIONS – Use home switch positions based on homing direction and travel limits
#ifdef BED_CENTER_AT_0_0
#define X_HOME_POS X_MAX_LENGTH * X_HOME_DIR * 0.5
#define Y_HOME_POS Y_MAX_LENGTH * Y_HOME_DIR * 0.5
#else
#define LCD_WIDTH 16
#define LCD_HEIGHT 2
#define X_HOME_POS (X_HOME_DIR < 0 ? X_MIN_POS : X_MAX_POS)
#define Y_HOME_POS (Y_HOME_DIR < 0 ? Y_MIN_POS : Y_MAX_POS)
#endif
#define Z_HOME_POS (Z_HOME_DIR < 0 ? Z_MIN_POS : Z_MAX_POS)
#endif //!MANUAL_HOME_POSITIONS
/**
* Auto Bed Leveling
*/
#ifdef ENABLE_AUTO_BED_LEVELING
// Boundaries for probing based on set limits
#define MIN_PROBE_X (max(X_MIN_POS, X_MIN_POS + X_PROBE_OFFSET_FROM_EXTRUDER))
#define MAX_PROBE_X (min(X_MAX_POS, X_MAX_POS + X_PROBE_OFFSET_FROM_EXTRUDER))
#define MIN_PROBE_Y (max(Y_MIN_POS, Y_MIN_POS + Y_PROBE_OFFSET_FROM_EXTRUDER))
#define MAX_PROBE_Y (min(Y_MAX_POS, Y_MAX_POS + Y_PROBE_OFFSET_FROM_EXTRUDER))
#endif
/**
* Sled Options
*/
#ifdef Z_PROBE_SLED
#define Z_SAFE_HOMING
#endif
<<<<<<< HEAD
#endif
#ifdef DOGLCD
......@@ -323,303 +538,276 @@
#define Y_HOME_BUMP_MM X_HOME_BUMP_MM
#define Z_HOME_BUMP_MM X_HOME_BUMP_MM
#endif
=======
>>>>>>> origin/Development
/**
* AUTOSET LOCATIONS OF LIMIT SWITCHES
* Added by ZetaPhoenix 09-15-2012
*/
#ifdef MANUAL_HOME_POSITIONS // Use manual limit switch locations
#define X_HOME_POS MANUAL_X_HOME_POS
#define Y_HOME_POS MANUAL_Y_HOME_POS
#define Z_HOME_POS MANUAL_Z_HOME_POS
#else //!MANUAL_HOME_POSITIONS – Use home switch positions based on homing direction and travel limits
#ifdef BED_CENTER_AT_0_0
#define X_HOME_POS X_MAX_LENGTH * X_HOME_DIR * 0.5
#define Y_HOME_POS Y_MAX_LENGTH * Y_HOME_DIR * 0.5
/**
* Servo Leveling
*/
#define SERVO_LEVELING (NUM_SERVOS > 0 && defined(ENABLE_AUTO_BED_LEVELING))
#define SERVO_LEVELING_DELAY (SERVO_LEVELING && PROBE_SERVO_DEACTIVATION_DELAY > 0)
/**
* MAX_STEP_FREQUENCY differs for TOSHIBA OR ARDUINO DUE OR ARDUINO MEGA
*/
#ifdef __SAM3X8E__
#ifdef CONFIG_STEPPERS_TOSHIBA
#define MAX_STEP_FREQUENCY 120000 // Max step frequency for Toshiba Stepper Controllers
#define DOUBLE_STEP_FREQUENCY MAX_STEP_FREQUENCY
#else
#define MAX_STEP_FREQUENCY 500000 // Max step frequency for the Due is approx. 330kHz
#define DOUBLE_STEP_FREQUENCY 120000 //96kHz is close to maximum for an Arduino Due
#endif
#else
#define X_HOME_POS (X_HOME_DIR < 0 ? X_MIN_POS : X_MAX_POS)
#define Y_HOME_POS (Y_HOME_DIR < 0 ? Y_MIN_POS : Y_MAX_POS)
#ifdef CONFIG_STEPPERS_TOSHIBA
#define MAX_STEP_FREQUENCY 10000 // Max step frequency for Toshiba Stepper Controllers
#define DOUBLE_STEP_FREQUENCY MAX_STEP_FREQUENCY
#else
#define MAX_STEP_FREQUENCY 40000 // Max step frequency for Arduino mega
#endif
#endif
#define Z_HOME_POS (Z_HOME_DIR < 0 ? Z_MIN_POS : Z_MAX_POS)
#endif //!MANUAL_HOME_POSITIONS
/**
* Auto Bed Leveling
*/
#ifdef ENABLE_AUTO_BED_LEVELING
// Boundaries for probing based on set limits
#define MIN_PROBE_X (max(X_MIN_POS, X_MIN_POS + X_PROBE_OFFSET_FROM_EXTRUDER))
#define MAX_PROBE_X (min(X_MAX_POS, X_MAX_POS + X_PROBE_OFFSET_FROM_EXTRUDER))
#define MIN_PROBE_Y (max(Y_MIN_POS, Y_MIN_POS + Y_PROBE_OFFSET_FROM_EXTRUDER))
#define MAX_PROBE_Y (min(Y_MAX_POS, Y_MAX_POS + Y_PROBE_OFFSET_FROM_EXTRUDER))
#endif
/**
* Servo Leveling
*/
#define SERVO_LEVELING (NUM_SERVOS > 0 && defined(ENABLE_AUTO_BED_LEVELING))
#define SERVO_LEVELING_DELAY (SERVO_LEVELING && PROBE_SERVO_DEACTIVATION_DELAY > 0)
/**
* MAX_STEP_FREQUENCY differs for TOSHIBA OR ARDUINO DUE OR ARDUINO MEGA
*/
#ifdef __SAM3X8E__
#ifdef CONFIG_STEPPERS_TOSHIBA
#define MAX_STEP_FREQUENCY 120000 // Max step frequency for Toshiba Stepper Controllers
#define DOUBLE_STEP_FREQUENCY MAX_STEP_FREQUENCY
#else
#define MAX_STEP_FREQUENCY 320000 // Max step frequency for the Due is approx. 330kHz
#define DOUBLE_STEP_FREQUENCY 100000 //96kHz is close to maximum for an Arduino Due
#endif
#else
#ifdef CONFIG_STEPPERS_TOSHIBA
#define MAX_STEP_FREQUENCY 10000 // Max step frequency for Toshiba Stepper Controllers
#define DOUBLE_STEP_FREQUENCY MAX_STEP_FREQUENCY
// MS1 MS2 Stepper Driver Microstepping mode table
#define MICROSTEP1 LOW,LOW
#define MICROSTEP2 HIGH,LOW
#define MICROSTEP4 LOW,HIGH
#define MICROSTEP8 HIGH,HIGH
#if MB(ALLIGATOR)
#define MICROSTEP16 LOW,LOW
#define MICROSTEP32 HIGH,HIGH
#else
#define MAX_STEP_FREQUENCY 40000 // Max step frequency for Arduino mega
#define MICROSTEP16 HIGH,HIGH
#endif
#endif
// MS1 MS2 Stepper Driver Microstepping mode table
#define MICROSTEP1 LOW,LOW
#define MICROSTEP2 HIGH,LOW
#define MICROSTEP4 LOW,HIGH
#define MICROSTEP8 HIGH,HIGH
#if MB(ALLIGATOR)
#define MICROSTEP16 LOW,LOW
#define MICROSTEP32 HIGH,HIGH
#else
#define MICROSTEP16 HIGH,HIGH
#endif
/**
* Advance calculated values
*/
#ifdef ADVANCE
#define EXTRUSION_AREA (0.25 * D_FILAMENT * D_FILAMENT * M_PI)
#define STEPS_PER_CUBIC_MM_E (axis_steps_per_unit[E_AXIS] / EXTRUSION_AREA)
#endif
#ifdef ULTIPANEL
#undef SDCARDDETECTINVERTED
#endif
// Power Signal Control Definitions
// By default use Normal definition
#ifndef POWER_SUPPLY
#define POWER_SUPPLY 0
#endif
#if (POWER_SUPPLY == 1) // 1 = ATX
#define PS_ON_AWAKE LOW
#define PS_ON_ASLEEP HIGH
#elif (POWER_SUPPLY == 2) // 2 = X-Box 360 203W
#define PS_ON_AWAKE HIGH
#define PS_ON_ASLEEP LOW
#endif
#define HAS_POWER_SWITCH (POWER_SUPPLY > 0 && PIN_EXISTS(PS_ON))
/**
* Temp Sensor defines
*/
#if TEMP_SENSOR_0 == -2
#define HEATER_0_USES_MAX6675
#elif TEMP_SENSOR_0 == -1
#define HEATER_0_USES_AD595
#elif TEMP_SENSOR_0 == 0
#undef HEATER_0_MINTEMP
#undef HEATER_0_MAXTEMP
#elif TEMP_SENSOR_0 > 0
#define THERMISTORHEATER_0 TEMP_SENSOR_0
#define HEATER_0_USES_THERMISTOR
#endif
/**
* Advance calculated values
*/
#ifdef ADVANCE
#define EXTRUSION_AREA (0.25 * D_FILAMENT * D_FILAMENT * M_PI)
#define STEPS_PER_CUBIC_MM_E (axis_steps_per_unit[E_AXIS] / EXTRUSION_AREA)
#endif
#if TEMP_SENSOR_1 == -1
#define HEATER_1_USES_AD595
#elif TEMP_SENSOR_1 == 0
#undef HEATER_1_MINTEMP
#undef HEATER_1_MAXTEMP
#elif TEMP_SENSOR_1 > 0
#define THERMISTORHEATER_1 TEMP_SENSOR_1
#define HEATER_1_USES_THERMISTOR
#endif
#ifdef ULTIPANEL
#undef SDCARDDETECTINVERTED
#endif
#if TEMP_SENSOR_2 == -1
#define HEATER_2_USES_AD595
#elif TEMP_SENSOR_2 == 0
#undef HEATER_2_MINTEMP
#undef HEATER_2_MAXTEMP
#elif TEMP_SENSOR_2 > 0
#define THERMISTORHEATER_2 TEMP_SENSOR_2
#define HEATER_2_USES_THERMISTOR
#endif
// Power Signal Control Definitions
// By default use Normal definition
#ifndef POWER_SUPPLY
#define POWER_SUPPLY 0
#endif
#if (POWER_SUPPLY == 1) // 1 = ATX
#define PS_ON_AWAKE LOW
#define PS_ON_ASLEEP HIGH
#elif (POWER_SUPPLY == 2) // 2 = X-Box 360 203W
#define PS_ON_AWAKE HIGH
#define PS_ON_ASLEEP LOW
#endif
#define HAS_POWER_SWITCH (POWER_SUPPLY > 0 && PIN_EXISTS(PS_ON))
/**
* Temp Sensor defines
*/
#if TEMP_SENSOR_0 == -2
#define HEATER_0_USES_MAX6675
#elif TEMP_SENSOR_0 == -1
#define HEATER_0_USES_AD595
#elif TEMP_SENSOR_0 == 0
#undef HEATER_0_MINTEMP
#undef HEATER_0_MAXTEMP
#elif TEMP_SENSOR_0 > 0
#define THERMISTORHEATER_0 TEMP_SENSOR_0
#define HEATER_0_USES_THERMISTOR
#endif
#if TEMP_SENSOR_3 == -1
#define HEATER_3_USES_AD595
#elif TEMP_SENSOR_3 == 0
#undef HEATER_3_MINTEMP
#undef HEATER_3_MAXTEMP
#elif TEMP_SENSOR_3 > 0
#define THERMISTORHEATER_3 TEMP_SENSOR_3
#define HEATER_3_USES_THERMISTOR
#endif
#if TEMP_SENSOR_1 == -1
#define HEATER_1_USES_AD595
#elif TEMP_SENSOR_1 == 0
#undef HEATER_1_MINTEMP
#undef HEATER_1_MAXTEMP
#elif TEMP_SENSOR_1 > 0
#define THERMISTORHEATER_1 TEMP_SENSOR_1
#define HEATER_1_USES_THERMISTOR
#endif
#if TEMP_SENSOR_BED == -1
#define BED_USES_AD595
#elif TEMP_SENSOR_BED == 0
#undef BED_MINTEMP
#undef BED_MAXTEMP
#elif TEMP_SENSOR_BED > 0
#define THERMISTORBED TEMP_SENSOR_BED
#define BED_USES_THERMISTOR
#endif
#if TEMP_SENSOR_2 == -1
#define HEATER_2_USES_AD595
#elif TEMP_SENSOR_2 == 0
#undef HEATER_2_MINTEMP
#undef HEATER_2_MAXTEMP
#elif TEMP_SENSOR_2 > 0
#define THERMISTORHEATER_2 TEMP_SENSOR_2
#define HEATER_2_USES_THERMISTOR
#endif
/**
* ARRAY_BY_EXTRUDERS based on EXTRUDERS
*/
#if EXTRUDERS > 3
#define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1, v2, v3, v4 }
#elif EXTRUDERS > 2
#define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1, v2, v3 }
#elif EXTRUDERS > 1
#define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1, v2 }
#else
#define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1 }
#endif
#if TEMP_SENSOR_3 == -1
#define HEATER_3_USES_AD595
#elif TEMP_SENSOR_3 == 0
#undef HEATER_3_MINTEMP
#undef HEATER_3_MAXTEMP
#elif TEMP_SENSOR_3 > 0
#define THERMISTORHEATER_3 TEMP_SENSOR_3
#define HEATER_3_USES_THERMISTOR
#endif
/**
* ARRAY_BY_HOTENDS based on HOTENDS
*/
#if HOTENDS > 3
#define ARRAY_BY_HOTENDS(v1, v2, v3, v4) { v1, v2, v3, v4 }
#elif HOTENDS > 2
#define ARRAY_BY_HOTENDS(v1, v2, v3, v4) { v1, v2, v3 }
#elif HOTENDS > 1
#define ARRAY_BY_HOTENDS(v1, v2, v3, v4) { v1, v2 }
#else
#define ARRAY_BY_HOTENDS(v1, v2, v3, v4) { v1 }
#endif
#if TEMP_SENSOR_BED == -1
#define BED_USES_AD595
#elif TEMP_SENSOR_BED == 0
#undef BED_MINTEMP
#undef BED_MAXTEMP
#undef THERMAL_PROTECTION_BED
#undef THERMAL_PROTECTION_BED_PERIOD
#elif TEMP_SENSOR_BED > 0
#define THERMISTORBED TEMP_SENSOR_BED
#define BED_USES_THERMISTOR
#endif
/**
* ARRAY_BY_EXTRUDERS based on EXTRUDERS
*/
#if EXTRUDERS > 3
#define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1, v2, v3, v4 }
#elif EXTRUDERS > 2
#define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1, v2, v3 }
#elif EXTRUDERS > 1
#define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1, v2 }
#else
#define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1 }
#endif
/**
* Shorthand for pin tests, used wherever needed
*/
#define HAS_TEMP_0 (PIN_EXISTS(TEMP_0) && TEMP_SENSOR_0 != 0 && TEMP_SENSOR_0 != -2)
#define HAS_TEMP_1 (PIN_EXISTS(TEMP_1) && TEMP_SENSOR_1 != 0)
#define HAS_TEMP_2 (PIN_EXISTS(TEMP_2) && TEMP_SENSOR_2 != 0)
#define HAS_TEMP_3 (PIN_EXISTS(TEMP_3) && TEMP_SENSOR_3 != 0)
#define HAS_TEMP_BED (PIN_EXISTS(TEMP_BED) && TEMP_SENSOR_BED != 0)
#define HAS_HEATER_0 (PIN_EXISTS(HEATER_0))
#define HAS_HEATER_1 (PIN_EXISTS(HEATER_1))
#define HAS_HEATER_2 (PIN_EXISTS(HEATER_2))
#define HAS_HEATER_3 (PIN_EXISTS(HEATER_3))
#define HAS_HEATER_BED (PIN_EXISTS(HEATER_BED))
#define HAS_AUTO_FAN_0 (PIN_EXISTS(EXTRUDER_0_AUTO_FAN))
#define HAS_AUTO_FAN_1 (PIN_EXISTS(EXTRUDER_1_AUTO_FAN))
#define HAS_AUTO_FAN_2 (PIN_EXISTS(EXTRUDER_2_AUTO_FAN))
#define HAS_AUTO_FAN_3 (PIN_EXISTS(EXTRUDER_3_AUTO_FAN))
#define HAS_AUTO_FAN (HAS_AUTO_FAN_0 || HAS_AUTO_FAN_1 || HAS_AUTO_FAN_2 || HAS_AUTO_FAN_3)
#define HAS_FAN (PIN_EXISTS(FAN))
#define HAS_CONTROLLERFAN (PIN_EXISTS(CONTROLLERFAN))
#define HAS_SERVO_0 (PIN_EXISTS(SERVO0))
#define HAS_SERVO_1 (PIN_EXISTS(SERVO1))
#define HAS_SERVO_2 (PIN_EXISTS(SERVO2))
#define HAS_SERVO_3 (PIN_EXISTS(SERVO3))
#define HAS_FILAMENT_SENSOR (defined(FILAMENT_SENSOR) && PIN_EXISTS(FILWIDTH))
#define HAS_POWER_CONSUMPTION_SENSOR (defined(POWER_CONSUMPTION) && PIN_EXISTS(POWER_CONSUMPTION))
#define HAS_FILRUNOUT (defined(FILAMENT_RUNOUT_SENSOR) && PIN_EXISTS(FILRUNOUT))
#define HAS_HOME (PIN_EXISTS(HOME))
#define HAS_KILL (PIN_EXISTS(KILL))
#define HAS_SUICIDE (PIN_EXISTS(SUICIDE))
#define HAS_PHOTOGRAPH (PIN_EXISTS(PHOTOGRAPH))
#define HAS_X_MIN (PIN_EXISTS(X_MIN))
#define HAS_X_MAX (PIN_EXISTS(X_MAX))
#define HAS_Y_MIN (PIN_EXISTS(Y_MIN))
#define HAS_Y_MAX (PIN_EXISTS(Y_MAX))
#define HAS_Z_MIN (PIN_EXISTS(Z_MIN))
#define HAS_Z_MAX (PIN_EXISTS(Z_MAX))
#define HAS_Z2_MIN (PIN_EXISTS(Z2_MIN))
#define HAS_Z2_MAX (PIN_EXISTS(Z2_MAX))
#define HAS_Z_PROBE (PIN_EXISTS(Z_PROBE))
#define HAS_E_MIN (PIN_EXISTS(E_MIN))
#define HAS_SOLENOID_1 (PIN_EXISTS(SOL1))
#define HAS_SOLENOID_2 (PIN_EXISTS(SOL2))
#define HAS_SOLENOID_3 (PIN_EXISTS(SOL3))
#define HAS_MICROSTEPS (PIN_EXISTS(X_MS1))
#define HAS_MICROSTEPS_E0 (PIN_EXISTS(E0_MS1))
#define HAS_MICROSTEPS_E1 (PIN_EXISTS(E1_MS1))
#define HAS_MICROSTEPS_E2 (PIN_EXISTS(E2_MS1))
#define HAS_X_ENABLE (PIN_EXISTS(X_ENABLE))
#define HAS_X2_ENABLE (PIN_EXISTS(X2_ENABLE))
#define HAS_Y_ENABLE (PIN_EXISTS(Y_ENABLE))
#define HAS_Y2_ENABLE (PIN_EXISTS(Y2_ENABLE))
#define HAS_Z_ENABLE (PIN_EXISTS(Z_ENABLE))
#define HAS_Z2_ENABLE (PIN_EXISTS(Z2_ENABLE))
#define HAS_E0_ENABLE (PIN_EXISTS(E0_ENABLE))
#define HAS_E1_ENABLE (PIN_EXISTS(E1_ENABLE))
#define HAS_E2_ENABLE (PIN_EXISTS(E2_ENABLE))
#define HAS_E3_ENABLE (PIN_EXISTS(E3_ENABLE))
#define HAS_X_DIR (PIN_EXISTS(X_DIR))
#define HAS_X2_DIR (PIN_EXISTS(X2_DIR))
#define HAS_Y_DIR (PIN_EXISTS(Y_DIR))
#define HAS_Y2_DIR (PIN_EXISTS(Y2_DIR))
#define HAS_Z_DIR (PIN_EXISTS(Z_DIR))
#define HAS_Z2_DIR (PIN_EXISTS(Z2_DIR))
#define HAS_E0_DIR (PIN_EXISTS(E0_DIR))
#define HAS_E1_DIR (PIN_EXISTS(E1_DIR))
#define HAS_E2_DIR (PIN_EXISTS(E2_DIR))
#define HAS_E3_DIR (PIN_EXISTS(E3_DIR))
#define HAS_X_STEP (PIN_EXISTS(X_STEP))
#define HAS_X2_STEP (PIN_EXISTS(X2_STEP))
#define HAS_Y_STEP (PIN_EXISTS(Y_STEP))
#define HAS_Y2_STEP (PIN_EXISTS(Y2_STEP))
#define HAS_Z_STEP (PIN_EXISTS(Z_STEP))
#define HAS_Z2_STEP (PIN_EXISTS(Z2_STEP))
#define HAS_E0_STEP (PIN_EXISTS(E0_STEP))
#define HAS_E1_STEP (PIN_EXISTS(E1_STEP))
#define HAS_E2_STEP (PIN_EXISTS(E2_STEP))
#define HAS_E3_STEP (PIN_EXISTS(E3_STEP))
#define HAS_E0E1 (PIN_EXISTS(E0E1_CHOICE))
#define HAS_E0E2 (PIN_EXISTS(E0E2_CHOICE))
#define HAS_E0E3 (PIN_EXISTS(E0E3_CHOICE))
#define HAS_E0E4 (PIN_EXISTS(E0E4_CHOICE))
#define HAS_E1E3 (PIN_EXISTS(E1E3_CHOICE))
#define HAS_BTN_BACK (PIN_EXISTS(BTN_BACK))
/**
* ARRAY_BY_HOTENDS based on HOTENDS
*/
#if HOTENDS > 3
#define ARRAY_BY_HOTENDS(v1, v2, v3, v4) { v1, v2, v3, v4 }
#elif HOTENDS > 2
#define ARRAY_BY_HOTENDS(v1, v2, v3, v4) { v1, v2, v3 }
#elif HOTENDS > 1
#define ARRAY_BY_HOTENDS(v1, v2, v3, v4) { v1, v2 }
#else
#define ARRAY_BY_HOTENDS(v1, v2, v3, v4) { v1 }
#endif
/**
* Helper Macros for heaters and extruder fan
*/
#ifdef INVERTED_HEATER_PINS
#define WRITE_HEATER(pin,value) WRITE(pin,!value)
#else
#define WRITE_HEATER(pin,value) WRITE(pin,value)
#endif
#define WRITE_HEATER_0P(v) WRITE_HEATER(HEATER_0_PIN, v)
#if HOTENDS > 1 || defined(HEATERS_PARALLEL)
#define WRITE_HEATER_1(v) WRITE_HEATER(HEATER_1_PIN, v)
#if HOTENDS > 2
#define WRITE_HEATER_2(v) WRITE_HEATER(HEATER_2_PIN, v)
#if HOTENDS > 3
#define WRITE_HEATER_3(v) WRITE_HEATER(HEATER_3_PIN, v)
/**
* Shorthand for pin tests, used wherever needed
*/
#define HAS_TEMP_0 (PIN_EXISTS(TEMP_0) && TEMP_SENSOR_0 != 0 && TEMP_SENSOR_0 != -2)
#define HAS_TEMP_1 (PIN_EXISTS(TEMP_1) && TEMP_SENSOR_1 != 0)
#define HAS_TEMP_2 (PIN_EXISTS(TEMP_2) && TEMP_SENSOR_2 != 0)
#define HAS_TEMP_3 (PIN_EXISTS(TEMP_3) && TEMP_SENSOR_3 != 0)
#define HAS_TEMP_BED (PIN_EXISTS(TEMP_BED) && TEMP_SENSOR_BED != 0)
#define HAS_HEATER_0 (PIN_EXISTS(HEATER_0))
#define HAS_HEATER_1 (PIN_EXISTS(HEATER_1))
#define HAS_HEATER_2 (PIN_EXISTS(HEATER_2))
#define HAS_HEATER_3 (PIN_EXISTS(HEATER_3))
#define HAS_HEATER_BED (PIN_EXISTS(HEATER_BED))
#define HAS_AUTO_FAN_0 (PIN_EXISTS(EXTRUDER_0_AUTO_FAN))
#define HAS_AUTO_FAN_1 (PIN_EXISTS(EXTRUDER_1_AUTO_FAN))
#define HAS_AUTO_FAN_2 (PIN_EXISTS(EXTRUDER_2_AUTO_FAN))
#define HAS_AUTO_FAN_3 (PIN_EXISTS(EXTRUDER_3_AUTO_FAN))
#define HAS_AUTO_FAN (HAS_AUTO_FAN_0 || HAS_AUTO_FAN_1 || HAS_AUTO_FAN_2 || HAS_AUTO_FAN_3)
#define HAS_FAN (PIN_EXISTS(FAN))
#define HAS_CONTROLLERFAN (PIN_EXISTS(CONTROLLERFAN))
#define HAS_SERVO_0 (PIN_EXISTS(SERVO0))
#define HAS_SERVO_1 (PIN_EXISTS(SERVO1))
#define HAS_SERVO_2 (PIN_EXISTS(SERVO2))
#define HAS_SERVO_3 (PIN_EXISTS(SERVO3))
#define HAS_FILAMENT_SENSOR (defined(FILAMENT_SENSOR) && PIN_EXISTS(FILWIDTH))
#define HAS_POWER_CONSUMPTION_SENSOR (defined(POWER_CONSUMPTION) && PIN_EXISTS(POWER_CONSUMPTION))
#define HAS_FILRUNOUT (defined(FILAMENT_RUNOUT_SENSOR) && PIN_EXISTS(FILRUNOUT))
#define HAS_HOME (PIN_EXISTS(HOME))
#define HAS_KILL (PIN_EXISTS(KILL))
#define HAS_SUICIDE (PIN_EXISTS(SUICIDE))
#define HAS_PHOTOGRAPH (PIN_EXISTS(PHOTOGRAPH))
#define HAS_X_MIN (PIN_EXISTS(X_MIN))
#define HAS_X_MAX (PIN_EXISTS(X_MAX))
#define HAS_Y_MIN (PIN_EXISTS(Y_MIN))
#define HAS_Y_MAX (PIN_EXISTS(Y_MAX))
#define HAS_Z_MIN (PIN_EXISTS(Z_MIN))
#define HAS_Z_MAX (PIN_EXISTS(Z_MAX))
#define HAS_Z2_MIN (PIN_EXISTS(Z2_MIN))
#define HAS_Z2_MAX (PIN_EXISTS(Z2_MAX))
#define HAS_Z_PROBE (PIN_EXISTS(Z_PROBE))
#define HAS_E_MIN (PIN_EXISTS(E_MIN))
#define HAS_SOLENOID_1 (PIN_EXISTS(SOL1))
#define HAS_SOLENOID_2 (PIN_EXISTS(SOL2))
#define HAS_SOLENOID_3 (PIN_EXISTS(SOL3))
#define HAS_MICROSTEPS (PIN_EXISTS(X_MS1))
#define HAS_MICROSTEPS_E0 (PIN_EXISTS(E0_MS1))
#define HAS_MICROSTEPS_E1 (PIN_EXISTS(E1_MS1))
#define HAS_MICROSTEPS_E2 (PIN_EXISTS(E2_MS1))
#define HAS_X_ENABLE (PIN_EXISTS(X_ENABLE))
#define HAS_X2_ENABLE (PIN_EXISTS(X2_ENABLE))
#define HAS_Y_ENABLE (PIN_EXISTS(Y_ENABLE))
#define HAS_Y2_ENABLE (PIN_EXISTS(Y2_ENABLE))
#define HAS_Z_ENABLE (PIN_EXISTS(Z_ENABLE))
#define HAS_Z2_ENABLE (PIN_EXISTS(Z2_ENABLE))
#define HAS_E0_ENABLE (PIN_EXISTS(E0_ENABLE))
#define HAS_E1_ENABLE (PIN_EXISTS(E1_ENABLE))
#define HAS_E2_ENABLE (PIN_EXISTS(E2_ENABLE))
#define HAS_E3_ENABLE (PIN_EXISTS(E3_ENABLE))
#define HAS_X_DIR (PIN_EXISTS(X_DIR))
#define HAS_X2_DIR (PIN_EXISTS(X2_DIR))
#define HAS_Y_DIR (PIN_EXISTS(Y_DIR))
#define HAS_Y2_DIR (PIN_EXISTS(Y2_DIR))
#define HAS_Z_DIR (PIN_EXISTS(Z_DIR))
#define HAS_Z2_DIR (PIN_EXISTS(Z2_DIR))
#define HAS_E0_DIR (PIN_EXISTS(E0_DIR))
#define HAS_E1_DIR (PIN_EXISTS(E1_DIR))
#define HAS_E2_DIR (PIN_EXISTS(E2_DIR))
#define HAS_E3_DIR (PIN_EXISTS(E3_DIR))
#define HAS_X_STEP (PIN_EXISTS(X_STEP))
#define HAS_X2_STEP (PIN_EXISTS(X2_STEP))
#define HAS_Y_STEP (PIN_EXISTS(Y_STEP))
#define HAS_Y2_STEP (PIN_EXISTS(Y2_STEP))
#define HAS_Z_STEP (PIN_EXISTS(Z_STEP))
#define HAS_Z2_STEP (PIN_EXISTS(Z2_STEP))
#define HAS_E0_STEP (PIN_EXISTS(E0_STEP))
#define HAS_E1_STEP (PIN_EXISTS(E1_STEP))
#define HAS_E2_STEP (PIN_EXISTS(E2_STEP))
#define HAS_E3_STEP (PIN_EXISTS(E3_STEP))
#define HAS_E0E1 (PIN_EXISTS(E0E1_CHOICE))
#define HAS_E0E2 (PIN_EXISTS(E0E2_CHOICE))
#define HAS_E0E3 (PIN_EXISTS(E0E3_CHOICE))
#define HAS_E0E4 (PIN_EXISTS(E0E4_CHOICE))
#define HAS_E1E3 (PIN_EXISTS(E1E3_CHOICE))
#define HAS_BTN_BACK (PIN_EXISTS(BTN_BACK))
/**
* Shorthand for filament sensor and power sensor for ultralcd.cpp, dogm_lcd_implementation.h, ultralcd_implementation_hitachi_HD44780.h
*/
#define HAS_LCD_FILAMENT_SENSOR (HAS_FILAMENT_SENSOR && defined(FILAMENT_LCD_DISPLAY))
#define HAS_LCD_POWER_SENSOR (HAS_POWER_CONSUMPTION_SENSOR && defined(POWER_CONSUMPTION_LCD_DISPLAY))
/**
* Helper Macros for heaters and extruder fan
*/
#ifdef INVERTED_HEATER_PINS
#define WRITE_HEATER(pin,value) WRITE(pin,!value)
#else
#define WRITE_HEATER(pin,value) WRITE(pin,value)
#endif
#define WRITE_HEATER_0P(v) WRITE_HEATER(HEATER_0_PIN, v)
#if HOTENDS > 1 || defined(HEATERS_PARALLEL)
#define WRITE_HEATER_1(v) WRITE_HEATER(HEATER_1_PIN, v)
#if HOTENDS > 2
#define WRITE_HEATER_2(v) WRITE_HEATER(HEATER_2_PIN, v)
#if HOTENDS > 3
#define WRITE_HEATER_3(v) WRITE_HEATER(HEATER_3_PIN, v)
#endif
#endif
#endif
#endif
#ifdef HEATERS_PARALLEL
#define WRITE_HEATER_0(v) { WRITE_HEATER_0P(v); WRITE_HEATER_1(v); }
#else
#define WRITE_HEATER_0(v) WRITE_HEATER_0P(v)
#endif
#if HAS_HEATER_BED
#define WRITE_HEATER_BED(v) WRITE_HEATER(HEATER_BED_PIN, v)
#endif
#if HAS_FAN
#define WRITE_FAN(v) WRITE(FAN_PIN, v)
#endif
/**
* Shorthand for filament sensor and power sensor for ultralcd.cpp, dogm_lcd_implementation.h, ultralcd_implementation_hitachi_HD44780.h
*/
#define HAS_LCD_FILAMENT_SENSOR (HAS_FILAMENT_SENSOR && defined(FILAMENT_LCD_DISPLAY))
#define HAS_LCD_POWER_SENSOR (HAS_POWER_CONSUMPTION_SENSOR && defined(POWER_CONSUMPTION_LCD_DISPLAY))
#ifdef HEATERS_PARALLEL
#define WRITE_HEATER_0(v) { WRITE_HEATER_0P(v); WRITE_HEATER_1(v); }
#else
#define WRITE_HEATER_0(v) WRITE_HEATER_0P(v)
#endif
#if HAS_HEATER_BED
#define WRITE_HEATER_BED(v) WRITE_HEATER(HEATER_BED_PIN, v)
#endif
#if HAS_FAN
#define WRITE_FAN(v) WRITE(FAN_PIN, v)
#endif
#endif //CONFIGURATION_LCD
#endif //CONFIGURATION_LCD
#endif //CONDITIONALS_H
MarlinKimbra/configuration_store.cpp
View file @ c260d3f4
......@@ -14,15 +14,14 @@
*
*/
#define EEPROM_VERSION "V21"
#define EEPROM_VERSION "V22"
/**
* V21 EEPROM Layout:
* V22 EEPROM Layout:
*
* ver
* M92 XYZ E0 E1 E2 E3 axis_steps_per_unit (x7)
* M203 XYZ E0 E1 E2 E3 max_feedrate (x7)
* M??? E0 E1 E2 E3 retraction_feedrate (x4)
* M201 XYZ E0 E1 E2 E3 max_acceleration_units_per_sq_second (x7)
* M204 P acceleration
* M204 R retract_acceleration
......@@ -45,7 +44,7 @@
* M666 R delta_radius
* M666 D delta_diagonal_rod
* M666 H Z max_pos
* M666 P z_probe_offset
* M666 P XYZ XYZ probe_offset (x3)
*
* Z_DUAL_ENDSTOPS
* M666 Z z_endstop_adj
......@@ -103,6 +102,10 @@
#include "ultralcd.h"
#include "configuration_store.h"
#ifdef SDSUPPORT
#include "cardreader.h"
#endif
void _EEPROM_writeData(int &pos, uint8_t* value, uint8_t size) {
uint8_t c;
while(size--) {
......@@ -127,17 +130,16 @@ void _EEPROM_readData(int &pos, uint8_t* value, uint8_t size) {
#define EEPROM_WRITE_VAR(pos, value) _EEPROM_writeData(pos, (uint8_t*)&value, sizeof(value))
#define EEPROM_READ_VAR(pos, value) _EEPROM_readData(pos, (uint8_t*)&value, sizeof(value))
/**
* Store Configuration Settings - M500
*/
#define DUMMY_PID_VALUE 3000.0f
#define EEPROM_OFFSET 100
#define LIFETIME_EEPROM_OFFSET 600
#define LIFETIME_MAGIC "L99"
#ifdef EEPROM_SETTINGS
/**
* Store Configuration Settings - M500
*/
void Config_StoreSettings() {
float dummy = 0.0f;
char ver[4] = "000";
......@@ -145,7 +147,6 @@ void Config_StoreSettings() {
EEPROM_WRITE_VAR(i, ver); // invalidate data first
EEPROM_WRITE_VAR(i, axis_steps_per_unit);
EEPROM_WRITE_VAR(i, max_feedrate);
EEPROM_WRITE_VAR(i, max_retraction_feedrate);
EEPROM_WRITE_VAR(i, max_acceleration_units_per_sq_second);
EEPROM_WRITE_VAR(i, acceleration);
EEPROM_WRITE_VAR(i, retract_acceleration);
......@@ -178,9 +179,9 @@ void Config_StoreSettings() {
#endif
#ifndef ULTIPANEL
int plaPreheatHotendTemp = PLA_PREHEAT_HOTEND_TEMP, plaPreheatHPBTemp = PLA_PREHEAT_HPB_TEMP, plaPreheatFanSpeed = PLA_PREHEAT_FAN_SPEED;
int absPreheatHotendTemp = ABS_PREHEAT_HOTEND_TEMP, absPreheatHPBTemp = ABS_PREHEAT_HPB_TEMP, absPreheatFanSpeed = ABS_PREHEAT_FAN_SPEED;
int gumPreheatHotendTemp = GUM_PREHEAT_HOTEND_TEMP, gumPreheatHPBTemp = GUM_PREHEAT_HPB_TEMP, gumPreheatFanSpeed = GUM_PREHEAT_FAN_SPEED;
int plaPreheatHotendTemp = PLA_PREHEAT_HOTEND_TEMP, plaPreheatHPBTemp = PLA_PREHEAT_HPB_TEMP, plaPreheatFanSpeed = PLA_PREHEAT_FAN_SPEED,
absPreheatHotendTemp = ABS_PREHEAT_HOTEND_TEMP, absPreheatHPBTemp = ABS_PREHEAT_HPB_TEMP, absPreheatFanSpeed = ABS_PREHEAT_FAN_SPEED,
gumPreheatHotendTemp = GUM_PREHEAT_HOTEND_TEMP, gumPreheatHPBTemp = GUM_PREHEAT_HPB_TEMP, gumPreheatFanSpeed = GUM_PREHEAT_FAN_SPEED;
#endif
EEPROM_WRITE_VAR(i, plaPreheatHotendTemp);
......@@ -219,8 +220,8 @@ void Config_StoreSettings() {
EEPROM_WRITE_VAR(i, bedKi);
EEPROM_WRITE_VAR(i, bedKd);
#if !defined(DOGLCD) || LCD_CONTRAST < 0
int lcd_contrast = 32;
#if defined(DOGLCD) || LCD_CONTRAST < 0
const int lcd_contrast = 32;
#endif
EEPROM_WRITE_VAR(i, lcd_contrast);
......@@ -293,7 +294,6 @@ void Config_RetrieveSettings() {
// version number match
EEPROM_READ_VAR(i, axis_steps_per_unit);
EEPROM_READ_VAR(i, max_feedrate);
EEPROM_READ_VAR(i, max_retraction_feedrate);
EEPROM_READ_VAR(i, max_acceleration_units_per_sq_second);
// steps per sq second need to be updated to agree with the units per sq second (as they are what is used in the planner)
......@@ -377,9 +377,9 @@ void Config_RetrieveSettings() {
for (int q = 2; q--;) EEPROM_READ_VAR(i, dummy); // bedKi, bedKd
}
#if !defined(DOGLCD) || LCD_CONTRAST < 0
#if defined(DOGLCD) || LCD_CONTRAST < 0
int lcd_contrast;
#endif //DOGLCD
#endif
EEPROM_READ_VAR(i, lcd_contrast);
......@@ -441,36 +441,33 @@ void Config_RetrieveSettings() {
* Reset Configuration Settings - M502
*/
void Config_ResetDefault() {
float tmp1[] = DEFAULT_AXIS_STEPS_PER_UNIT;
float tmp2[] = DEFAULT_MAX_FEEDRATE;
float tmp3[] = DEFAULT_RETRACTION_MAX_FEEDRATE;
long tmp4[] = DEFAULT_MAX_ACCELERATION;
long tmp3[] = DEFAULT_MAX_ACCELERATION;
#ifdef PIDTEMP
float tmp5[] = DEFAULT_Kp;
float tmp6[] = DEFAULT_Ki;
float tmp7[] = DEFAULT_Kd;
float tmp4[] = DEFAULT_Kp;
float tmp5[] = DEFAULT_Ki;
float tmp6[] = DEFAULT_Kd;
#endif // PIDTEMP
#if defined(HOTEND_OFFSET_X) && defined(HOTEND_OFFSET_Y)
float tmp8[] = HOTEND_OFFSET_X;
float tmp9[] = HOTEND_OFFSET_Y;
float tmp7[] = HOTEND_OFFSET_X;
float tmp8[] = HOTEND_OFFSET_Y;
#else
float tmp7[] = {0,0,0,0};
float tmp8[] = {0,0,0,0};
float tmp9[] = {0,0,0,0};
#endif
for (int i = 0; i < 3 + EXTRUDERS; i++) {
axis_steps_per_unit[i] = tmp1[i];
max_feedrate[i] = tmp2[i];
max_acceleration_units_per_sq_second[i] = tmp4[i];
max_acceleration_units_per_sq_second[i] = tmp3[i];
}
for (int i = 0; i < EXTRUDERS; i++) {
max_retraction_feedrate[i] = tmp3[i];
#if HOTENDS > 1
hotend_offset[X_AXIS][i] = tmp8[i];
hotend_offset[Y_AXIS][i] = tmp9[i];
hotend_offset[X_AXIS][i] = tmp7[i];
hotend_offset[Y_AXIS][i] = tmp8[i];
#endif
#ifdef SCARA
if (i < sizeof(axis_scaling) / sizeof(*axis_scaling))
......@@ -494,9 +491,9 @@ void Config_ResetDefault() {
#ifdef ENABLE_AUTO_BED_LEVELING
zprobe_zoffset = -Z_PROBE_OFFSET_FROM_EXTRUDER;
#elif !defined DELTA
#elif !defined(DELTA)
zprobe_zoffset = 0;
#endif //ENABLE_AUTO_BED_LEVELING
#endif
#ifdef DELTA
endstop_adj[X_AXIS] = endstop_adj[Y_AXIS] = endstop_adj[Z_AXIS] = 0;
......@@ -506,7 +503,7 @@ void Config_ResetDefault() {
max_pos[2] = MANUAL_Z_HOME_POS;
set_default_z_probe_offset();
set_delta_constants();
#endif //DELTA
#endif
#ifdef ULTIPANEL
plaPreheatHotendTemp = PLA_PREHEAT_HOTEND_TEMP;
......@@ -520,20 +517,26 @@ void Config_ResetDefault() {
gumPreheatFanSpeed = GUM_PREHEAT_FAN_SPEED;
#endif
#if defined(DOGLCD) && LCD_CONTRAST >= 0
#ifdef HAS_LCD_CONTRAST
lcd_contrast = DEFAULT_LCD_CONTRAST;
#endif //DOGLCD
#ifdef PIDTEMP
for (int e = 0; e < HOTENDS; e++)
{
Kp[e] = tmp5[e];
Ki[e] = scalePID_i(tmp6[e]);
Kd[e] = scalePID_d(tmp7[e]);
Kp[e] = tmp4[e];
Ki[e] = scalePID_i(tmp5[e]);
Kd[e] = scalePID_d(tmp6[e]);
}
// call updatePID (similar to when we have processed M301)
updatePID();
#endif//PIDTEMP
#endif // PIDTEMP
#ifdef PIDTEMPBED
bedKp = DEFAULT_bedKp;
bedKi = scalePID_i(DEFAULT_bedKi);
bedKd = scalePID_d(DEFAULT_bedKd);
#endif
#ifdef FWRETRACT
autoretract_enabled = false;
......@@ -558,9 +561,9 @@ void Config_ResetDefault() {
filament_size[2] = DEFAULT_NOMINAL_FILAMENT_DIA;
#if EXTRUDERS > 3
filament_size[3] = DEFAULT_NOMINAL_FILAMENT_DIA;
#endif //EXTRUDERS > 3
#endif //EXTRUDERS > 2
#endif //EXTRUDERS > 1
#endif // EXTRUDERS > 3
#endif // EXTRUDERS > 2
#endif // EXTRUDERS > 1
calculate_volumetric_multipliers();
#ifdef IDLE_OOZING_PREVENT
......@@ -570,317 +573,337 @@ void Config_ResetDefault() {
ECHO_LM(DB, "Hardcoded Default Settings Loaded");
}
#ifndef DISABLE_M503
/**
* Print Configuration Settings - M502
*/
void Config_PrintSettings(bool forReplay) {
// Always have this function, even with EEPROM_SETTINGS disabled, the current values will be shown
#if !defined(DISABLE_M503)
if (!forReplay) {
ECHO_LM(DB, "Steps per unit:");
}
ECHO_SMV(DB, " M92 X", axis_steps_per_unit[X_AXIS]);
ECHO_MV(" Y", axis_steps_per_unit[Y_AXIS]);
ECHO_MV(" Z", axis_steps_per_unit[Z_AXIS]);
ECHO_MV(" E0 S", axis_steps_per_unit[E_AXIS + 0]);
#if EXTRUDERS > 1
ECHO_MV(" E1 S", axis_steps_per_unit[E_AXIS + 1]);
#if EXTRUDERS > 2
ECHO_MV(" E2 S", axis_steps_per_unit[E_AXIS + 2]);
#if EXTRUDERS > 3
ECHO_MV(" E3 S", axis_steps_per_unit[E_AXIS + 3]);
#endif //EXTRUDERS > 3
#endif //EXTRUDERS > 2
#endif //EXTRUDERS > 1
ECHO_E;
/**
* Print Configuration Settings - M503
*/
void Config_PrintSettings(bool forReplay) {
// Always have this function, even with EEPROM_SETTINGS disabled, the current values will be shown
#ifdef SCARA
if (!forReplay) {
ECHO_LM(DB, "Scaling factors:");
ECHO_LM(DB, "Steps per unit:");
}
ECHO_SMV(DB, " M365 X", axis_scaling[X_AXIS]);
ECHO_MV(" Y", axis_scaling[Y_AXIS]);
ECHO_EMV(" Z", axis_scaling[Z_AXIS]);
#endif // SCARA
if (!forReplay) {
ECHO_LM(DB, "Maximum feedrates (mm/s):");
}
ECHO_SMV(DB, " M203 X", max_feedrate[X_AXIS]);
ECHO_MV(" Y", max_feedrate[Y_AXIS] );
ECHO_MV(" Z", max_feedrate[Z_AXIS] );
ECHO_MV(" E0 S", max_feedrate[E_AXIS + 0]);
#if EXTRUDERS > 1
ECHO_MV(" E1 S", max_feedrate[E_AXIS + 1]);
#if EXTRUDERS > 2
ECHO_MV(" E2 S", max_feedrate[E_AXIS + 2]);
#if EXTRUDERS > 3
ECHO_MV(" E3 S", max_feedrate[E_AXIS + 3]);
#endif //EXTRUDERS > 3
#endif //EXTRUDERS > 2
#endif //EXTRUDERS > 1
ECHO_E;
if (!forReplay) {
ECHO_LM(DB, "Retraction Steps per unit:");
}
ECHO_SMV(DB, " E0 ",max_retraction_feedrate[0]);
#if EXTRUDERS > 1
ECHO_MV(" E1 ", max_retraction_feedrate[1]);
#if EXTRUDERS > 2
ECHO_MV(" E2 ", max_retraction_feedrate[2]);
#if EXTRUDERS > 3
ECHO_MV(" E3 ", max_retraction_feedrate[3]);
#endif //EXTRUDERS > 3
#endif //EXTRUDERS > 2
#endif //EXTRUDERS > 1
ECHO_E;
if (!forReplay) {
ECHO_LM(DB, "Maximum Acceleration (mm/s2):");
}
ECHO_SMV(DB, " M201 X", max_acceleration_units_per_sq_second[X_AXIS] );
ECHO_MV(" Y", max_acceleration_units_per_sq_second[Y_AXIS] );
ECHO_MV(" Z", max_acceleration_units_per_sq_second[Z_AXIS] );
ECHO_MV(" E0 S", max_acceleration_units_per_sq_second[E_AXIS]);
#if EXTRUDERS > 1
ECHO_MV(" E1 S", max_acceleration_units_per_sq_second[E_AXIS+1]);
#if EXTRUDERS > 2
ECHO_MV(" E2 S", max_acceleration_units_per_sq_second[E_AXIS+2]);
#if EXTRUDERS > 3
ECHO_MV(" E3 S", max_acceleration_units_per_sq_second[E_AXIS+3]);
#endif //EXTRUDERS > 3
#endif //EXTRUDERS > 2
#endif //EXTRUDERS > 1
ECHO_E;
if (!forReplay) {
ECHO_LM(DB, "Accelerations: P=printing, R=retract and T=travel");
}
ECHO_SMV(DB," M204 P", acceleration );
ECHO_MV(" R", retract_acceleration);
ECHO_EMV(" T", travel_acceleration);
if (!forReplay) {
ECHO_LM(DB, "Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)");
}
ECHO_SMV(DB, " M205 S", minimumfeedrate );
ECHO_MV(" T", mintravelfeedrate );
ECHO_MV(" B", minsegmenttime );
ECHO_MV(" X", max_xy_jerk );
ECHO_MV(" Z", max_z_jerk);
ECHO_EMV(" E", max_e_jerk);
if (!forReplay) {
ECHO_LM(DB, "Home offset (mm):");
}
ECHO_SMV(DB, " M206 X", home_offset[X_AXIS] );
ECHO_MV(" Y", home_offset[Y_AXIS] );
ECHO_EMV(" Z", home_offset[Z_AXIS] );
ECHO_SMV(DB, " M92 X", axis_steps_per_unit[X_AXIS]);
ECHO_MV(" Y", axis_steps_per_unit[Y_AXIS]);
ECHO_MV(" Z", axis_steps_per_unit[Z_AXIS]);
ECHO_MV(" E0 S", axis_steps_per_unit[E_AXIS + 0]);
#if EXTRUDERS > 1
ECHO_MV(" E1 S", axis_steps_per_unit[E_AXIS + 1]);
#if EXTRUDERS > 2
ECHO_MV(" E2 S", axis_steps_per_unit[E_AXIS + 2]);
#if EXTRUDERS > 3
ECHO_MV(" E3 S", axis_steps_per_unit[E_AXIS + 3]);
#endif //EXTRUDERS > 3
#endif //EXTRUDERS > 2
#endif //EXTRUDERS > 1
ECHO_E;
#if HOTENDS > 1
if (!forReplay) {
ECHO_LM(DB, "Hotend offset (mm):");
}
for (int e = 0; e < HOTENDS; e++) {
ECHO_SMV(DB, " M218 T", e);
ECHO_MV(" X", hotend_offset[X_AXIS][e]);
ECHO_EMV(" Y" ,hotend_offset[Y_AXIS][e]);
}
#endif //HOTENDS > 1
#ifdef DELTA
if (!forReplay) {
ECHO_LM(DB, "Endstop adjustement (mm):");
}
ECHO_SMV(DB, " M666 X", endstop_adj[X_AXIS] );
ECHO_MV(" Y", endstop_adj[Y_AXIS] );
ECHO_EMV(" Z", endstop_adj[Z_AXIS] );
#ifdef SCARA
if (!forReplay) {
ECHO_LM(DB, "Scaling factors:");
}
ECHO_SMV(DB, " M365 X", axis_scaling[X_AXIS]);
ECHO_MV(" Y", axis_scaling[Y_AXIS]);
ECHO_EMV(" Z", axis_scaling[Z_AXIS]);
#endif // SCARA
if (!forReplay) {
ECHO_LM(DB, "Delta Geometry adjustment:");
ECHO_LM(DB, "Maximum feedrates (mm/s):");
}
ECHO_SMV(DB, " M666 A", tower_adj[0]);
ECHO_MV(" B", tower_adj[1]);
ECHO_MV(" C", tower_adj[2]);
ECHO_MV(" E", tower_adj[3]);
ECHO_MV(" F", tower_adj[4]);
ECHO_MV(" G", tower_adj[5]);
ECHO_MV(" R", delta_radius);
ECHO_MV(" D", delta_diagonal_rod);
ECHO_MV(" H", max_pos[2]);
ECHO_EMV(" P", z_probe_offset[3]);
ECHO_SMV(DB, " M203 X", max_feedrate[X_AXIS]);
ECHO_MV(" Y", max_feedrate[Y_AXIS] );
ECHO_MV(" Z", max_feedrate[Z_AXIS] );
ECHO_MV(" E0 S", max_feedrate[E_AXIS + 0]);
#if EXTRUDERS > 1
ECHO_MV(" E1 S", max_feedrate[E_AXIS + 1]);
#if EXTRUDERS > 2
ECHO_MV(" E2 S", max_feedrate[E_AXIS + 2]);
#if EXTRUDERS > 3
ECHO_MV(" E3 S", max_feedrate[E_AXIS + 3]);
#endif //EXTRUDERS > 3
#endif //EXTRUDERS > 2
#endif //EXTRUDERS > 1
ECHO_E;
if (!forReplay) {
ECHO_LM(DB, "Tower Positions:");
ECHO_LM(DB, "Maximum Acceleration (mm/s2):");
}
ECHO_SMV(DB, " Tower1 X:", delta_tower1_x);
ECHO_MV(" Y:", delta_tower1_y);
ECHO_MV(" Tower2 X:", delta_tower2_x);
ECHO_MV(" Y:", delta_tower2_y);
ECHO_MV(" Tower3 X:", delta_tower3_x);
ECHO_EMV(" Y:", delta_tower3_y);
ECHO_SMV(DB, " M201 X", max_acceleration_units_per_sq_second[X_AXIS] );
ECHO_MV(" Y", max_acceleration_units_per_sq_second[Y_AXIS] );
ECHO_MV(" Z", max_acceleration_units_per_sq_second[Z_AXIS] );
ECHO_MV(" E0 S", max_acceleration_units_per_sq_second[E_AXIS]);
#if EXTRUDERS > 1
ECHO_MV(" E1 S", max_acceleration_units_per_sq_second[E_AXIS+1]);
#if EXTRUDERS > 2
ECHO_MV(" E2 S", max_acceleration_units_per_sq_second[E_AXIS+2]);
#if EXTRUDERS > 3
ECHO_MV(" E3 S", max_acceleration_units_per_sq_second[E_AXIS+3]);
#endif //EXTRUDERS > 3
#endif //EXTRUDERS > 2
#endif //EXTRUDERS > 1
ECHO_E;
#elif defined(Z_DUAL_ENDSTOPS)
if (!forReplay) {
ECHO_LM(DB, "Z2 Endstop adjustement (mm):");
}
ECHO_LMV(DB, " M666 Z", z_endstop_adj );
#elif defined(ENABLE_AUTO_BED_LEVELING)
if (!forReplay) {
ECHO_LM(DB, "Z Probe offset (mm)");
ECHO_LM(DB, "Accelerations: P=printing, R=retract and T=travel");
}
ECHO_LMV(DB, " M666 P", zprobe_zoffset);
#endif // DELTA
ECHO_SMV(DB," M204 P", acceleration );
ECHO_MV(" R", retract_acceleration);
ECHO_EMV(" T", travel_acceleration);
#ifdef ULTIPANEL
if (!forReplay) {
ECHO_LM(DB, "Material heatup parameters:");
ECHO_LM(DB, "Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)");
}
ECHO_SMV(DB, " M145 M0 H", plaPreheatHotendTemp);
ECHO_MV(" B", plaPreheatHPBTemp);
ECHO_MV(" F", plaPreheatFanSpeed);
ECHO_EM(" (Material PLA)");
ECHO_SMV(DB, " M145 M1 H", absPreheatHotendTemp);
ECHO_MV(" B", absPreheatHPBTemp);
ECHO_MV(" F", absPreheatFanSpeed);
ECHO_EM(" (Material ABS)");
ECHO_SMV(DB, " M145 M2 H", gumPreheatHotendTemp);
ECHO_MV(" B", gumPreheatHPBTemp);
ECHO_MV(" F", gumPreheatFanSpeed);
ECHO_EM(" (Material GUM)");
#endif // ULTIPANEL
#if defined(PIDTEMP) || defined(PIDTEMPBED)
ECHO_SMV(DB, " M205 S", minimumfeedrate );
ECHO_MV(" T", mintravelfeedrate );
ECHO_MV(" B", minsegmenttime );
ECHO_MV(" X", max_xy_jerk );
ECHO_MV(" Z", max_z_jerk);
ECHO_EMV(" E", max_e_jerk);
if (!forReplay) {
ECHO_LM(DB, "PID settings:");
ECHO_LM(DB, "Home offset (mm):");
}
#ifdef PIDTEMP
ECHO_SMV(DB, " M206 X", home_offset[X_AXIS] );
ECHO_MV(" Y", home_offset[Y_AXIS] );
ECHO_EMV(" Z", home_offset[Z_AXIS] );
#if HOTENDS > 1
if (!forReplay) {
ECHO_LM(DB, "Hotend offset (mm):");
}
for (int e = 0; e < HOTENDS; e++) {
ECHO_SMV(DB, " M301 E", e);
ECHO_MV(" P", PID_PARAM(Kp, e));
ECHO_MV(" I", unscalePID_i(PID_PARAM(Ki, e)));
ECHO_EMV(" D", unscalePID_d(PID_PARAM(Kd, e)));
}
#endif
#ifdef PIDTEMPBED
ECHO_SMV(DB, " M304 P", bedKp); // for compatibility with hosts, only echos values for E0
ECHO_MV(" I", unscalePID_i(bedKi));
ECHO_EMV(" D", unscalePID_d(bedKd));
ECHO_SMV(DB, " M218 T", e);
ECHO_MV(" X", hotend_offset[X_AXIS][e]);
ECHO_EMV(" Y" ,hotend_offset[Y_AXIS][e]);
}
#endif //HOTENDS > 1
#ifdef DELTA
if (!forReplay) {
ECHO_LM(DB, "Delta Geometry adjustment:");
}
ECHO_SMV(DB, " M666 A", tower_adj[0], 3);
ECHO_MV(" B", tower_adj[1], 3);
ECHO_MV(" C", tower_adj[2], 3);
ECHO_MV(" I", tower_adj[3], 3);
ECHO_MV(" J", tower_adj[4], 3);
ECHO_MV(" K", tower_adj[5], 3);
ECHO_MV(" R", delta_radius);
ECHO_MV(" D", delta_diagonal_rod);
ECHO_EMV(" H", max_pos[2]);
if (!forReplay) {
ECHO_LM(DB, "Endstop Offsets:");
}
ECHO_SMV(DB, " M666 X", endstop_adj[X_AXIS]);
ECHO_MV(" Y", endstop_adj[Y_AXIS]);
ECHO_EMV(" Z", endstop_adj[Z_AXIS]);
if (!forReplay) {
ECHO_LM(DB, "Z-Probe Offset:");
}
ECHO_SMV(DB, " M666 P X", z_probe_offset[0]);
ECHO_MV(" Y", z_probe_offset[1]);
ECHO_EMV(" Z", z_probe_offset[2]);
#elif defined(Z_DUAL_ENDSTOPS)
if (!forReplay) {
ECHO_LM(DB, "Z2 Endstop adjustement (mm):");
}
ECHO_LMV(DB, " M666 Z", z_endstop_adj );
#elif defined(ENABLE_AUTO_BED_LEVELING)
if (!forReplay) {
ECHO_LM(DB, "Z Probe offset (mm)");
}
ECHO_LMV(DB, " M666 P", zprobe_zoffset);
#endif
#endif
#ifdef FWRETRACT
if (!forReplay) {
ECHO_LM(DB,"Retract: S=Length (mm) F:Speed (mm/m) Z: ZLift (mm)");
}
ECHO_SMV(DB, " M207 S", retract_length);
ECHO_MV(" F", retract_feedrate*60);
ECHO_EMV(" Z", retract_zlift);
if (!forReplay) {
ECHO_LM(DB, "Recover: S=Extra length (mm) F:Speed (mm/m)");
}
ECHO_SMV(DB, " M208 S", retract_recover_length);
ECHO_MV(" F", retract_recover_feedrate*60);
if (!forReplay) {
ECHO_LM(DB,"Auto-Retract: S=0 to disable, 1 to interpret extrude-only moves as retracts or recoveries");
}
ECHO_LMV(DB," M209 S", autoretract_enabled);
#ifdef ULTIPANEL
if (!forReplay) {
ECHO_LM(DB, "Material heatup parameters:");
}
ECHO_SMV(DB, " M145 M0 H", plaPreheatHotendTemp);
ECHO_MV(" B", plaPreheatHPBTemp);
ECHO_MV(" F", plaPreheatFanSpeed);
ECHO_EM(" (Material PLA)");
ECHO_SMV(DB, " M145 M1 H", absPreheatHotendTemp);
ECHO_MV(" B", absPreheatHPBTemp);
ECHO_MV(" F", absPreheatFanSpeed);
ECHO_EM(" (Material ABS)");
ECHO_SMV(DB, " M145 M2 H", gumPreheatHotendTemp);
ECHO_MV(" B", gumPreheatHPBTemp);
ECHO_MV(" F", gumPreheatFanSpeed);
ECHO_EM(" (Material GUM)");
#endif // ULTIPANEL
#if defined(PIDTEMP) || defined(PIDTEMPBED)
if (!forReplay) {
ECHO_LM(DB, "PID settings:");
}
#ifdef PIDTEMP
for (int e = 0; e < HOTENDS; e++) {
ECHO_SMV(DB, " M301 E", e);
ECHO_MV(" P", PID_PARAM(Kp, e));
ECHO_MV(" I", unscalePID_i(PID_PARAM(Ki, e)));
ECHO_EMV(" D", unscalePID_d(PID_PARAM(Kd, e)));
}
#endif
#ifdef PIDTEMPBED
ECHO_SMV(DB, " M304 P", bedKp); // for compatibility with hosts, only echos values for E0
ECHO_MV(" I", unscalePID_i(bedKi));
ECHO_EMV(" D", unscalePID_d(bedKd));
#endif
#endif
#if EXTRUDERS > 1
#ifdef FWRETRACT
if (!forReplay) {
ECHO_LM(DB,"Retract: S=Length (mm) F:Speed (mm/m) Z: ZLift (mm)");
}
ECHO_SMV(DB, " M207 S", retract_length);
ECHO_MV(" F", retract_feedrate*60);
ECHO_EMV(" Z", retract_zlift);
if (!forReplay) {
ECHO_LM(DB,"Multi-extruder settings:");
ECHO_LMV(DB, " Swap retract length (mm): ", retract_length_swap);
ECHO_LMV(DB, " Swap rec. addl. length (mm): ", retract_recover_length_swap);
ECHO_LM(DB, "Recover: S=Extra length (mm) F:Speed (mm/m)");
}
#endif // EXTRUDERS > 1
ECHO_SMV(DB, " M208 S", retract_recover_length);
ECHO_MV(" F", retract_recover_feedrate*60);
if (!forReplay) {
ECHO_LM(DB,"Auto-Retract: S=0 to disable, 1 to interpret extrude-only moves as retracts or recoveries");
}
ECHO_LMV(DB," M209 S", autoretract_enabled);
#endif // FWRETRACT
#if EXTRUDERS > 1
if (!forReplay) {
ECHO_LM(DB,"Multi-extruder settings:");
ECHO_LMV(DB, " Swap retract length (mm): ", retract_length_swap);
ECHO_LMV(DB, " Swap rec. addl. length (mm): ", retract_recover_length_swap);
}
#endif // EXTRUDERS > 1
if (volumetric_enabled) {
if (!forReplay) {
ECHO_LM(DB, "Filament settings:");
}
ECHO_LMV(DB, " M200 D", filament_size[0]);
#endif // FWRETRACT
#if EXTRUDERS > 1
ECHO_LMV(DB, " M200 T1 D", filament_size[1]);
#if EXTRUDERS > 2
ECHO_LMV(DB, " M200 T2 D", filament_size[2]);
#if EXTRUDERS > 3
ECHO_LMV(DB, " M200 T3 D", filament_size[3]);
if (volumetric_enabled) {
if (!forReplay) {
ECHO_LM(DB, "Filament settings:");
}
ECHO_LMV(DB, " M200 D", filament_size[0]);
#if EXTRUDERS > 1
ECHO_LMV(DB, " M200 T1 D", filament_size[1]);
#if EXTRUDERS > 2
ECHO_LMV(DB, " M200 T2 D", filament_size[2]);
#if EXTRUDERS > 3
ECHO_LMV(DB, " M200 T3 D", filament_size[3]);
#endif
#endif
#endif
#endif
} else {
if (!forReplay) {
ECHO_LM(DB, "Filament settings: Disabled");
} else {
if (!forReplay) {
ECHO_LM(DB, "Filament settings: Disabled");
}
}
ConfigSD_PrintSettings(forReplay);
}
// Print Lifetime stats
#ifdef POWER_CONSUMPTION
void ConfigSD_PrintSettings(bool forReplay) {
// Always have this function, even with SD_SETTINGS disabled, the current values will be shown
#ifdef POWER_CONSUMPTION
if (!forReplay) {
ECHO_LM(DB, "Watt/h consumed:");
}
ECHO_LVM(OK, power_consumption_hour," W/h");
#endif
if (!forReplay) {
ECHO_LM(DB, "Watt/h consumed:");
ECHO_LM(DB, "Power on time:");
}
ECHO_LVM(DB, power_consumption_hour," W/h");
#endif
if (!forReplay) {
ECHO_LM(DB, "Power on time:");
char time[30];
int day = printer_usage_seconds / 60 / 60 / 24, hours = (printer_usage_seconds / 60 / 60) % 24, minutes = (printer_usage_seconds / 60) % 60;
sprintf_P(time, PSTR(" %i " MSG_END_DAY " %i " MSG_END_HOUR " %i " MSG_END_MINUTE), day, hours, minutes);
ECHO_LV(DB, time);
}
char time[30];
int hours = printer_usage_seconds / 60 / 60, minutes = (printer_usage_seconds / 60) % 60;
sprintf_P(time, PSTR("%i " MSG_END_HOUR " %i " MSG_END_MINUTE), hours, minutes);
ECHO_LV(DB, time);
}
#endif //!DISABLE_M503
#endif // !DISABLE_M503
/**
* Lifetime on EEPROM
* Configuration on SD card
*
* Author: Simone Primarosa
*
*/
void load_lifetime_stats() {
int i = LIFETIME_EEPROM_OFFSET;
char stored_magic[4];
char magic[4] = LIFETIME_MAGIC;
EEPROM_READ_VAR(i, stored_magic); // read magic
void ConfigSD_ResetDefault() {
#ifdef POWER_CONSUMPTION
power_consumption_hour = 0;
#endif
printer_usage_seconds = 0;
ECHO_LM(OK, "Hardcoded SD Default Settings Loaded");
}
if (strncmp(magic, stored_magic, 3) != 0) {
#ifdef POWER_CONSUMPTION
power_consumption_hour = 0;
#endif
printer_usage_seconds = 0;
}
else {
EEPROM_READ_VAR(i, printer_usage_seconds);
#if defined(SDSUPPORT) && defined(SD_SETTINGS)
void ConfigSD_StoreSettings() {
if(!IS_SD_INSERTED || card.isFileOpen() || card.sdprinting) return;
card.openFile(CFG_SD_FILE, false, true, false);
char buff[CFG_SD_MAX_VALUE_LEN];
#ifdef POWER_CONSUMPTION
EEPROM_READ_VAR(i, power_consumption_hour);
ltoa(power_consumption_hour,buff,10);
card.unparseKeyLine(cfgSD_KEY[SD_CFG_PWR], buff);
#endif
ltoa(printer_usage_seconds,buff,10);
card.unparseKeyLine(cfgSD_KEY[SD_CFG_TME], buff);
card.closeFile(false);
config_last_update = millis();
}
}
void save_lifetime_stats() {
int i = LIFETIME_EEPROM_OFFSET;
char magic[4] = "000";
EEPROM_WRITE_VAR(i, magic); // invalidate data first
EEPROM_WRITE_VAR(i, printer_usage_seconds);
#ifdef POWER_CONSUMPTION
EEPROM_WRITE_VAR(i, power_consumption_hour);
#endif
void ConfigSD_RetrieveSettings(bool addValue) {
if(!IS_SD_INSERTED || card.isFileOpen() || card.sdprinting || !card.cardOK) return;
char key[CFG_SD_MAX_KEY_LEN], value[CFG_SD_MAX_VALUE_LEN];
int k_idx;
int k_len, v_len;
card.openFile(CFG_SD_FILE, true, true, false);
while(true) {
k_len = CFG_SD_MAX_KEY_LEN;
v_len = CFG_SD_MAX_VALUE_LEN;
card.parseKeyLine(key, value, k_len, v_len);
if(k_len == 0 || v_len == 0) break; //no valid key or value founded
k_idx = ConfigSD_KeyIndex(key);
if(k_idx == -1) continue; //unknow key ignore it
switch(k_idx) {
#ifdef POWER_CONSUMPTION
case SD_CFG_PWR: {
if(addValue) power_consumption_hour += (unsigned long)atol(value);
else power_consumption_hour = (unsigned long)atol(value);
}
break;
#endif
case SD_CFG_TME: {
if(addValue) printer_usage_seconds += (unsigned long)atol(value);
else printer_usage_seconds = (unsigned long)atol(value);
}
break;
}
}
card.closeFile(false);
config_readed = true;
}
char magic2[4] = LIFETIME_MAGIC;
int j = LIFETIME_EEPROM_OFFSET;
EEPROM_WRITE_VAR(j, magic2); // validate data
int ConfigSD_KeyIndex(char *key) { //At the moment a binary search algorithm is used for simplicity, if it will be necessary (Eg. tons of key), an hash search algorithm will be implemented.
int begin = 0, end = SD_CFG_END - 1, middle, cond;
while(begin <= end) {
middle = (begin + end) / 2;
cond = strcmp(cfgSD_KEY[middle], key);
if(!cond) return middle;
else if(cond < 0) begin = middle + 1;
else end = middle - 1;
}
return -1;
}
config_last_update = millis();
}
#endif
MarlinKimbra/configuration_store.h
View file @ c260d3f4
......@@ -4,13 +4,14 @@
#include "Configuration.h"
void Config_ResetDefault();
void load_lifetime_stats();
void save_lifetime_stats();
void ConfigSD_ResetDefault();
#ifndef DISABLE_M503
void Config_PrintSettings(bool forReplay=false);
void Config_PrintSettings(bool forReplay = false);
void ConfigSD_PrintSettings(bool forReplay = false);
#else
FORCE_INLINE void Config_PrintSettings(bool forReplay=false) {}
FORCE_INLINE void ConfigSD_PrintSettings(bool forReplay = false) {}
#endif
#ifdef EEPROM_SETTINGS
......@@ -21,4 +22,27 @@ void save_lifetime_stats();
FORCE_INLINE void Config_RetrieveSettings() { Config_ResetDefault(); Config_PrintSettings(); }
#endif
#if defined(SDSUPPORT) && defined(SD_SETTINGS)
static const char *cfgSD_KEY[] = { //Keep this in lexicographical order for better search performance(O(Nlog2(N)) insted of O(N*N)) (if you don't keep this sorted, the algorithm for find the key index won't work, keep attention.)
#ifdef POWER_CONSUMPTION
"PWR",
#endif
"TME",
};
enum cfgSD_ENUM { //This need to be in the same order as cfgSD_KEY
#ifdef POWER_CONSUMPTION
SD_CFG_PWR,
#endif
SD_CFG_TME,
SD_CFG_END //Leave this always as the last
};
void ConfigSD_StoreSettings();
void ConfigSD_RetrieveSettings(bool addValue = false);
int ConfigSD_KeyIndex(char *key);
#else
FORCE_INLINE void ConfigSD_RetrieveSettings() { ConfigSD_ResetDefault(); }
#endif
#endif //CONFIGURATION_STORE_H
MarlinKimbra/dogm_lcd_implementation.h
View file @ c260d3f4
......@@ -35,15 +35,11 @@
#include "ultralcd_st7920_u8glib_rrd.h"
#include "Configuration.h"
// save 3120 bytes of PROGMEM by commenting out #define USE_BIG_EDIT_FONT
// we don't have a big font for Cyrillic, Kana
#if defined(MAPPER_C2C3) || defined(MAPPER_NON)
//#define USE_BIG_EDIT_FONT
#if !defined(MAPPER_C2C3) && !defined(MAPPER_NON) && defined(USE_BIG_EDIT_FONT)
#undef USE_BIG_EDIT_FONT
#endif
// If you have spare 2300Byte of progmem and want to use a
// smaller font on the Info-screen uncomment the next line.
//#define USE_SMALL_INFOFONT
#ifdef USE_SMALL_INFOFONT
#include "dogm_font_data_6x9_marlin.h"
#define FONT_STATUSMENU_NAME u8g_font_6x9
......@@ -126,6 +122,12 @@
#elif defined(VIKI2) || defined(miniVIKI)
// Mini Viki and Viki 2.0 LCD, ST7565 controller as well
U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0);
#elif defined(U8GLIB_LM6059_AF)
// Based on the Adafruit ST7565 (http://www.adafruit.com/products/250)
U8GLIB_LM6059 u8g(DOGLCD_CS, DOGLCD_A0);
#elif defined U8GLIB_SSD1306
// Generic support for SSD1306 OLED I2C LCDs
U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE);
#else
// for regular DOGM128 display with HW-SPI
U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0); // HW-SPI Com: CS, A0
......@@ -273,7 +275,6 @@ static void lcd_implementation_status_screen() {
u8g.drawFrame(42, 49 - TALL_FONT_CORRECTION, 10, 4);
u8g.drawPixel(50, 43 - TALL_FONT_CORRECTION);
// Progress bar frame
u8g.drawFrame(54, 49, 73, 4 - TALL_FONT_CORRECTION);
......@@ -346,19 +347,28 @@ static void lcd_implementation_status_screen() {
u8g.drawPixel(8,XYZ_BASELINE - 5);
u8g.drawPixel(8,XYZ_BASELINE - 3);
u8g.setPrintPos(10,XYZ_BASELINE);
lcd_print(ftostr31ns(current_position[X_AXIS]));
if (axis_known_position[X_AXIS])
lcd_print(ftostr31ns(current_position[X_AXIS]));
else
lcd_printPGM(PSTR("---"));
u8g.setPrintPos(43,XYZ_BASELINE);
lcd_print('Y');
u8g.drawPixel(49,XYZ_BASELINE - 5);
u8g.drawPixel(49,XYZ_BASELINE - 3);
u8g.setPrintPos(51,XYZ_BASELINE);
lcd_print(ftostr31ns(current_position[Y_AXIS]));
if (axis_known_position[Y_AXIS])
lcd_print(ftostr31ns(current_position[Y_AXIS]));
else
lcd_printPGM(PSTR("---"));
u8g.setPrintPos(83,XYZ_BASELINE);
lcd_print('Z');
u8g.drawPixel(89,XYZ_BASELINE - 5);
u8g.drawPixel(89,XYZ_BASELINE - 3);
u8g.setPrintPos(91,XYZ_BASELINE);
lcd_print(ftostr31(current_position[Z_AXIS]));
if (axis_known_position[Z_AXIS])
lcd_print(ftostr32sp(current_position[Z_AXIS]));
else
lcd_printPGM(PSTR("---.--"));
u8g.setColorIndex(1); // black on white
// Feedrate
......
MarlinKimbra/language.h
View file @ c260d3f4
......@@ -106,18 +106,12 @@
#define MSG_END_FILE_LIST "End file list"
#define MSG_INVALID_EXTRUDER "Invalid extruder"
#define MSG_INVALID_SOLENOID "Invalid solenoid"
#define MSG_M104_INVALID_EXTRUDER "M104 " MSG_INVALID_EXTRUDER " "
#define MSG_M105_INVALID_EXTRUDER "M105 " MSG_INVALID_EXTRUDER " "
#define MSG_M109_INVALID_EXTRUDER "M109 " MSG_INVALID_EXTRUDER " "
#define MSG_M200_INVALID_EXTRUDER "M200 " MSG_INVALID_EXTRUDER " "
#define MSG_M218_INVALID_EXTRUDER "M218 " MSG_INVALID_EXTRUDER " "
#define MSG_M221_INVALID_EXTRUDER "M221 " MSG_INVALID_EXTRUDER " "
#define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
#define MSG_HEATING "Heating..."
#define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_M115_REPORT "FIRMWARE_NAME:MarlinKimbra " BUILD_VERSION " FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
#define MSG_M115_REPORT "FIRMWARE_NAME: MarlinKimbra " BUILD_VERSION " FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
#define MSG_COUNT_X " Count X: "
#define MSG_ERR_KILLED "Printer halted. kill() called!"
#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
......@@ -134,14 +128,15 @@
#define MSG_Z2_MAX "z2_max: "
#define MSG_Z_PROBE "z_probe: "
#define MSG_E_MIN "e_min: "
#define MSG_ERR_MATERIAL_INDEX "M145 S<index> out of range (0-2)"
#define MSG_ERR_M428_TOO_FAR "Too far from reference point"
#define MSG_M119_REPORT "Reporting endstop status"
#define MSG_ENDSTOP_HIT "TRIGGERED"
#define MSG_ENDSTOP_OPEN "NOT TRIGGERED"
#define MSG_HOTEND_OFFSET "Hotend offsets:"
#define MSG_EMPTY_PLANE "Autolevel can only be execute on an actual plane, make sure width and height are not 0!"
#define MSG_ERR_MATERIAL_INDEX "M145 S<index> out of range (0-2)"
#define MSG_FILRUNOUT_PIN "filament_runout_pin: "
#define MSG_ERR_M428_TOO_FAR "Too far from reference point"
#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
#define MSG_SD_INIT_FAIL "SD init fail"
......@@ -202,23 +197,27 @@
#define MSG_KP " Kp: "
#define MSG_KI " Ki: "
#define MSG_KD " Kd: "
#define MSG_B " B:"
#define MSG_T " T:"
#define MSG_AT " @:"
#define MSG_T "T:"
#define MSG_B "B:"
#define MSG_AT "@:"
#define MSG_BAT "B@:"
#define MSG_W "W:"
#define MSG_PID_AUTOTUNE_FINISHED MSG_PID_AUTOTUNE " finished! Put the last Kp, Ki and Kd constants from above into Configuration.h or send command M500 for save in EEPROM the new value!"
#define MSG_HEATING_FAILED "Heating failed"
#define MSG_THERMAL_RUNAWAY_STOP "Thermal Runaway, system stopped! Heater_ID: "
#define MSG_THERMAL_RUNAWAY_BED "bed"
#define MSG_TEMP_READ_ERROR "Temp measurement error!"
#define MSG_TEMP_BED "bed"
#define MSG_EXTRUDER_SWITCHED_OFF "Extruder switched off. Temperature difference between temp sensors is too high !"
#define MSG_PID_DEBUG " PID_DEBUG "
#define MSG_PID_DEBUG_INPUT ": Input "
#define MSG_PID_DEBUG_OUTPUT " Output "
#define MSG_PID_DEBUG_PTERM " pTerm "
#define MSG_PID_DEBUG_ITERM " iTerm "
#define MSG_PID_DEBUG_DTERM " dTerm "
#define MSG_INVALID_EXTRUDER_NUM " - Invalid extruder number !"
#define MSG_SWITCHED_OFF_MAX " switched off. MAXTEMP triggered !!"
#define MSG_MINTEMP_EXTRUDER_OFF ": Extruder switched off. MINTEMP triggered !"
#define MSG_MAXTEMP_EXTRUDER_OFF ": Extruder" MSG_SWITCHED_OFF_MAX
#define MSG_MAXTEMP_BED_OFF "Heated bed" MSG_SWITCHED_OFF_MAX
#define MSG_HEATER_BED "bed"
#define MSG_STOPPED_HEATER ", system stopped! Heater_ID: "
#define MSG_REDUNDANCY "Heater switched off. Temperature difference between temp sensors is too high !"
#define MSG_T_HEATING_FAILED "Heating failed"
#define MSG_T_THERMAL_RUNAWAY "Thermal Runaway"
#define MSG_T_MAXTEMP "MAXTEMP triggered"
#define MSG_T_MINTEMP "MINTEMP triggered"
#define MSG_ENDSTOP_XS "X"
#define MSG_ENDSTOP_YS "Y"
......@@ -226,9 +225,6 @@
#define MSG_ENDSTOP_ZPS "ZP"
#define MSG_ENDSTOP_ES "E"
//watchdog.cpp
#define MSG_WATCHDOG_RESET "Something is wrong, please turn off the printer."
//other
#define MSG_COMPILED "Compiled: "
#define MSG_ERR_HOMING_DIV "The Homing Bump Feedrate Divisor cannot be less than 1"
......
MarlinKimbra/language_en.h
View file @ c260d3f4
......@@ -24,14 +24,15 @@
#define MSG_AUTOSTART "Autostart"
#define MSG_DISABLE_STEPPERS "Disable steppers"
#define MSG_AUTO_HOME "Auto home"
#define MSG_BED_SETTING "Bed Setting"
#define MSG_LP_INTRO " Leveling bed... Press to start "
#define MSG_LP_1 " Adjust first point & Press the button"
#define MSG_LP_2 " Adjust second point & Press the button"
#define MSG_LP_3 " Adjust third point & Press the button"
#define MSG_LP_4 " Adjust fourth point & Press the button"
#define MSG_LP_5 " Is it ok? Press to end"
#define MSG_LP_6 " BED leveled!"
#define MSG_MBL_SETTING "Manual Bed Leveling"
#define MSG_MBL_BUTTON " Press the button "
#define MSG_MBL_INTRO " Leveling bed... "
#define MSG_MBL_1 " Adjust first point "
#define MSG_MBL_2 " Adjust second point"
#define MSG_MBL_3 " Adjust third point "
#define MSG_MBL_4 " Adjust fourth point"
#define MSG_MBL_5 " Is it ok? "
#define MSG_MBL_6 " BED leveled! "
#define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Set origin"
#define MSG_PREHEAT_PLA "Preheat PLA"
......@@ -143,20 +144,24 @@
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
#define MSG_END_HOUR "hours"
#define MSG_END_MINUTE "minutes"
#define MSG_HEATING_FAILED_LCD "Heating failed"
#define MSG_ERR_REDUNDANT_TEMP "Err: REDUNDANT TEMP ERROR"
#define MSG_THERMAL_RUNAWAY "THERMAL RUNAWAY"
#define MSG_ERR_MAXTEMP "Err: MAXTEMP"
#define MSG_ERR_MINTEMP "Err: MINTEMP"
#define MSG_ERR_MAXTEMP_BED "Err: MAXTEMP BED"
#define MSG_ERR_MINTEMP_BED "Err: MINTEMP BED"
#define MSG_END_DAY "days"
#define MSG_END_HOUR "hours"
#define MSG_END_MINUTE "minutes"
// Debug
#define MSG_DEBUG_ECHO "DEBUG ECHO ENABLED"
#define MSG_DEBUG_INFO "DEBUG INFO ENABLED"
#define MSG_DEBUG_ERRORS "DEBUG ERRORS ENABLED"
#define MSG_DEBUG_DRYRUN "DEBUG DRYRUN ENABLED"
// Calibrate Delta
#ifdef DELTA
#define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
......@@ -165,6 +170,7 @@
#define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center"
#endif // DELTA
// Scara
#ifdef SCARA
#define MSG_XSCALE "X Scale"
#define MSG_YSCALE "Y Scale"
......
MarlinKimbra/language_it.h
View file @ c260d3f4
......@@ -24,14 +24,15 @@
#define MSG_AUTOSTART "Autostart"
#define MSG_DISABLE_STEPPERS "Disabilita Motori"
#define MSG_AUTO_HOME "Auto Home"
#define MSG_BED_SETTING "Bed Setting"
#define MSG_LP_INTRO " Leveling bed... Press to start "
#define MSG_LP_1 " Adjust first point & Press the button"
#define MSG_LP_2 " Adjust second point & Press the button"
#define MSG_LP_3 " Adjust third point & Press the button"
#define MSG_LP_4 " Adjust fourth point & Press the button"
#define MSG_LP_5 " Is it ok? Press to end"
#define MSG_LP_6 " BED leveled!"
#define MSG_MBL_SETTING "Manual Bed Leveling "
#define MSG_MBL_BUTTON " Press the button "
#define MSG_MBL_INTRO " Leveling bed... "
#define MSG_MBL_1 " Adjust first point "
#define MSG_MBL_2 " Adjust second point"
#define MSG_MBL_3 " Adjust third point "
#define MSG_MBL_4 " Adjust fourth point"
#define MSG_MBL_5 " Is it ok? "
#define MSG_MBL_6 " BED leveled! "
#define MSG_SET_HOME_OFFSETS "Setta offset home"
#define MSG_SET_ORIGIN "Imposta Origine"
#define MSG_PREHEAT_PLA "Preriscalda PLA"
......@@ -79,18 +80,18 @@
#define MSG_E2 " E2"
#define MSG_E3 " E3"
#define MSG_E4 " E4"
#define MSG_ACC "Accel."
#define MSG_ACC "Accel"
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX "Vmax"
#define MSG_VMAX "Vmax "
#define MSG_X "x"
#define MSG_Y "y"
#define MSG_Z "z"
#define MSG_E "e"
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "VTrav min"
#define MSG_AMAX "Amax"
#define MSG_AMAX "Amax "
#define MSG_A_RETRACT "A-retract"
#define MSG_A_TRAVEL "A-travel"
#define MSG_XSTEPS "X steps/mm"
......@@ -103,7 +104,7 @@
#define MSG_TEMPERATURE "Temperatura"
#define MSG_MOTION "Movimento"
#define MSG_VOLUMETRIC "Filamento"
#define MSG_VOLUMETRIC_ENABLED "E in mm³"
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_FILAMENT_SIZE_EXTRUDER "Diam. filo"
#define MSG_CONTRAST "Contrasto LCD"
#define MSG_STORE_EPROM "Salva in EEPROM"
......@@ -130,7 +131,7 @@
#define MSG_CONTROL_RETRACTF "Ritrai V"
#define MSG_CONTROL_RETRACT_ZLIFT "Salta mm"
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Scamb. UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "S UnRet+mm"
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
#define MSG_AUTORETRACT "AutoArretramento"
#define MSG_FILAMENTCHANGE "Cambia filamento"
......@@ -143,20 +144,24 @@
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Finecorsa abort"
#define MSG_END_HOUR "ore"
#define MSG_END_MINUTE "minuti"
#define MSG_HEATING_FAILED_LCD "Heating failed"
#define MSG_ERR_REDUNDANT_TEMP "Err: REDUNDANT TEMP ERROR"
#define MSG_THERMAL_RUNAWAY "THERMAL RUNAWAY"
#define MSG_ERR_MAXTEMP "Err: MAXTEMP"
#define MSG_ERR_MINTEMP "Err: MINTEMP"
#define MSG_ERR_MAXTEMP_BED "Err: MAXTEMP BED"
#define MSG_ERR_MINTEMP_BED "Err: MINTEMP BED"
#define MSG_END_DAY "giorni"
#define MSG_END_HOUR "ore"
#define MSG_END_MINUTE "minuti"
// Debug
#define MSG_DEBUG_ECHO "DEBUG RIPETI"
#define MSG_DEBUG_INFO "DEBUG INFO"
#define MSG_DEBUG_ERRORS "DEBUG ERRORI"
#define MSG_DEBUG_DRYRUN "DEBUG STAMPA A VUOTO"
// Calibrate Delta
#ifdef DELTA
#define MSG_DELTA_CALIBRATE "Calibraz. Delta"
#define MSG_DELTA_CALIBRATE_X "Calibra X"
......@@ -165,6 +170,7 @@
#define MSG_DELTA_CALIBRATE_CENTER "Calibra Centro"
#endif // DELTA
// Scara
#ifdef SCARA
#define MSG_XSCALE "X Scale"
#define MSG_YSCALE "Y Scale"
......
MarlinKimbra/motion_control.cpp deleted 100644 → 0
View file @ 2347123a
/*
motion_control.c - high level interface for issuing motion commands
Part of Grbl
Copyright (c) 2009-2011 Simen Svale Skogsrud
Copyright (c) 2011 Sungeun K. Jeon
Grbl is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
Grbl is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
*/
#include "Marlin.h"
#include "stepper.h"
#include "planner.h"
// The arc is approximated by generating a huge number of tiny, linear segments. The length of each
// segment is configured in settings.mm_per_arc_segment.
void mc_arc(float *position, float *target, float *offset, uint8_t axis_0, uint8_t axis_1,
uint8_t axis_linear, float feed_rate, float radius, uint8_t isclockwise, uint8_t extruder, uint8_t driver)
{
// int acceleration_manager_was_enabled = plan_is_acceleration_manager_enabled();
// plan_set_acceleration_manager_enabled(false); // disable acceleration management for the duration of the arc
float center_axis0 = position[axis_0] + offset[axis_0];
float center_axis1 = position[axis_1] + offset[axis_1];
float linear_travel = target[axis_linear] - position[axis_linear];
float extruder_travel = target[E_AXIS] - position[E_AXIS];
float r_axis0 = -offset[axis_0]; // Radius vector from center to current location
float r_axis1 = -offset[axis_1];
float rt_axis0 = target[axis_0] - center_axis0;
float rt_axis1 = target[axis_1] - center_axis1;
// CCW angle between position and target from circle center. Only one atan2() trig computation required.
float angular_travel = atan2(r_axis0*rt_axis1-r_axis1*rt_axis0, r_axis0*rt_axis0+r_axis1*rt_axis1);
if (angular_travel < 0) { angular_travel += 2*M_PI; }
if (isclockwise) { angular_travel -= 2*M_PI; }
//20141002:full circle for G03 did not work, e.g. G03 X80 Y80 I20 J0 F2000 is giving an Angle of zero so head is not moving
//to compensate when start pos = target pos && angle is zero -> angle = 2Pi
if (position[axis_0] == target[axis_0] && position[axis_1] == target[axis_1] && angular_travel == 0)
{
angular_travel += 2*M_PI;
}
//end fix G03
float millimeters_of_travel = hypot(angular_travel*radius, fabs(linear_travel));
if (millimeters_of_travel < 0.001) { return; }
uint16_t segments = floor(millimeters_of_travel/MM_PER_ARC_SEGMENT);
if(segments == 0) segments = 1;
/*
// Multiply inverse feed_rate to compensate for the fact that this movement is approximated
// by a number of discrete segments. The inverse feed_rate should be correct for the sum of
// all segments.
if (invert_feed_rate) { feed_rate *= segments; }
*/
float theta_per_segment = angular_travel/segments;
float linear_per_segment = linear_travel/segments;
float extruder_per_segment = extruder_travel/segments;
/* Vector rotation by transformation matrix: r is the original vector, r_T is the rotated vector,
and phi is the angle of rotation. Based on the solution approach by Jens Geisler.
r_T = [cos(phi) -sin(phi);
sin(phi) cos(phi] * r ;
For arc generation, the center of the circle is the axis of rotation and the radius vector is
defined from the circle center to the initial position. Each line segment is formed by successive
vector rotations. This requires only two cos() and sin() computations to form the rotation
matrix for the duration of the entire arc. Error may accumulate from numerical round-off, since
all double numbers are single precision on the Arduino. (True double precision will not have
round off issues for CNC applications.) Single precision error can accumulate to be greater than
tool precision in some cases. Therefore, arc path correction is implemented.
Small angle approximation may be used to reduce computation overhead further. This approximation
holds for everything, but very small circles and large mm_per_arc_segment values. In other words,
theta_per_segment would need to be greater than 0.1 rad and N_ARC_CORRECTION would need to be large
to cause an appreciable drift error. N_ARC_CORRECTION~=25 is more than small enough to correct for
numerical drift error. N_ARC_CORRECTION may be on the order a hundred(s) before error becomes an
issue for CNC machines with the single precision Arduino calculations.
This approximation also allows mc_arc to immediately insert a line segment into the planner
without the initial overhead of computing cos() or sin(). By the time the arc needs to be applied
a correction, the planner should have caught up to the lag caused by the initial mc_arc overhead.
This is important when there are successive arc motions.
*/
// Vector rotation matrix values
float cos_T = 1-0.5*theta_per_segment*theta_per_segment; // Small angle approximation
float sin_T = theta_per_segment;
float arc_target[4];
float sin_Ti;
float cos_Ti;
float r_axisi;
uint16_t i;
int8_t count = 0;
// Initialize the linear axis
arc_target[axis_linear] = position[axis_linear];
// Initialize the extruder axis
arc_target[E_AXIS] = position[E_AXIS];
for (i = 1; i<segments; i++) { // Increment (segments-1)
if (count < N_ARC_CORRECTION) {
// Apply vector rotation matrix
r_axisi = r_axis0*sin_T + r_axis1*cos_T;
r_axis0 = r_axis0*cos_T - r_axis1*sin_T;
r_axis1 = r_axisi;
count++;
} else {
// Arc correction to radius vector. Computed only every N_ARC_CORRECTION increments.
// Compute exact location by applying transformation matrix from initial radius vector(=-offset).
cos_Ti = cos(i*theta_per_segment);
sin_Ti = sin(i*theta_per_segment);
r_axis0 = -offset[axis_0]*cos_Ti + offset[axis_1]*sin_Ti;
r_axis1 = -offset[axis_0]*sin_Ti - offset[axis_1]*cos_Ti;
count = 0;
}
// Update arc_target location
arc_target[axis_0] = center_axis0 + r_axis0;
arc_target[axis_1] = center_axis1 + r_axis1;
arc_target[axis_linear] += linear_per_segment;
arc_target[E_AXIS] += extruder_per_segment;
clamp_to_software_endstops(arc_target);
plan_buffer_line(arc_target[X_AXIS], arc_target[Y_AXIS], arc_target[Z_AXIS], arc_target[E_AXIS], feed_rate, extruder, driver);
}
// Ensure last segment arrives at target location.
plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], feed_rate, extruder, driver);
// plan_set_acceleration_manager_enabled(acceleration_manager_was_enabled);
}
MarlinKimbra/motion_control.h deleted 100644 → 0
View file @ 2347123a
/*
motion_control.h - high level interface for issuing motion commands
Part of Grbl
Copyright (c) 2009-2011 Simen Svale Skogsrud
Copyright (c) 2011 Sungeun K. Jeon
Grbl is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
Grbl is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef motion_control_h
#define motion_control_h
// Execute an arc in offset mode format. position == current xyz, target == target xyz,
// offset == offset from current xyz, axis_XXX defines circle plane in tool space, axis_linear is
// the direction of helical travel, radius == circle radius, isclockwise boolean. Used
// for vector transformation direction.
void mc_arc(float *position, float *target, float *offset, unsigned char axis_0, unsigned char axis_1,
unsigned char axis_linear, float feed_rate, float radius, unsigned char isclockwise, uint8_t extruder, uint8_t driver);
#endif
MarlinKimbra/pins.h
View file @ c260d3f4
/**
* pins.h
*/
/****************************************************************************************
* 10 BOARD_GEN7_CUSTOM - Gen7 custom (Alfons3 Version)
* 11 BOARD_GEN7_12 - Gen7 v1.1, v1.2
......@@ -69,7 +73,7 @@
#include "boards.h"
/// Preset optional pins
// Preset optional pins
#define X_MS1_PIN -1
#define X_MS2_PIN -1
#define Y_MS1_PIN -1
......@@ -82,6 +86,8 @@
#define E1_MS2_PIN -1
#define DIGIPOTSS_PIN -1
#define LCD_CONTRAST -1
#define Z2_MIN_PIN -1
#define Z2_MAX_PIN -1
/******************************************************************************
......@@ -966,6 +972,17 @@
#define BTN_ENC -1
#define LCD_SDSS 53
#define SDCARDDETECT 49
#elif defined(ELB_FULL_GRAPHIC_CONTROLLER)
#define BTN_EN1 35 // reverse if the encoder turns the wrong way.
#define BTN_EN2 37
#define BTN_ENC 31
#define SDCARDDETECT 49
#define LCD_SDSS 53
#define KILL_PIN 41
#define BEEPER 23
#define DOGLCD_CS 29
#define DOGLCD_A0 27
#define LCD_PIN_BL 33
#else
//arduino pin which triggers an piezzo beeper
#define BEEPER 33 // Beeper on AUX-4
......@@ -1032,7 +1049,6 @@
/****************************************************************************************
* 34
* RAMPS 1.3 / 1.4
......@@ -1159,6 +1175,17 @@
#define BTN_ENC -1
#define LCD_SDSS 53
#define SDCARDDETECT 49
#elif defined(ELB_FULL_GRAPHIC_CONTROLLER)
#define BTN_EN1 35 // reverse if the encoder turns the wrong way.
#define BTN_EN2 37
#define BTN_ENC 31
#define SDCARDDETECT 49
#define LCD_SDSS 53
#define KILL_PIN 41
#define BEEPER 23
#define DOGLCD_CS 29
#define DOGLCD_A0 27
#define LCD_PIN_BL 33
#else
//arduino pin which triggers an piezzo beeper
#define BEEPER 33 // Beeper on AUX-4
......@@ -1225,7 +1252,6 @@
/****************************************************************************************
* 35
* RAMPS 1.3 / 1.4
......@@ -1242,72 +1268,72 @@
#define LARGE_FLASH true
//X axis pins
#define ORIG_X_STEP_PIN 54
#define ORIG_X_DIR_PIN 55
#define ORIG_X_ENABLE_PIN 38
#define X_MIN_PIN 3
#define X_MAX_PIN 2
#define ORIG_X_STEP_PIN 54
#define ORIG_X_DIR_PIN 55
#define ORIG_X_ENABLE_PIN 38
#define X_MIN_PIN 3
#define X_MAX_PIN 2
//Y axis pins
#define ORIG_Y_STEP_PIN 60
#define ORIG_Y_DIR_PIN 61
#define ORIG_Y_ENABLE_PIN 56
#define Y_MIN_PIN 14
#define Y_MAX_PIN 15
#define ORIG_Y_STEP_PIN 60
#define ORIG_Y_DIR_PIN 61
#define ORIG_Y_ENABLE_PIN 56
#define Y_MIN_PIN 14
#define Y_MAX_PIN 15
#define Y2_STEP_PIN 36
#define Y2_DIR_PIN 34
#define Y2_ENABLE_PIN 30
#define Y2_STEP_PIN 36
#define Y2_DIR_PIN 34
#define Y2_ENABLE_PIN 30
//Z axis pins
#define ORIG_Z_STEP_PIN 46
#define ORIG_Z_DIR_PIN 48
#define ORIG_Z_ENABLE_PIN 62
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
#define Z_PROBE_PIN 18
#define ORIG_Z_STEP_PIN 46
#define ORIG_Z_DIR_PIN 48
#define ORIG_Z_ENABLE_PIN 62
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
#define Z_PROBE_PIN 18
#define Z2_STEP_PIN 36
#define Z2_DIR_PIN 34
#define Z2_ENABLE_PIN 30
#define Z2_STEP_PIN 36
#define Z2_DIR_PIN 34
#define Z2_ENABLE_PIN 30
//E axis pins
#define ORIG_E0_STEP_PIN 26
#define ORIG_E0_DIR_PIN 28
#define ORIG_E0_ENABLE_PIN 24
#define ORIG_E0_STEP_PIN 26
#define ORIG_E0_DIR_PIN 28
#define ORIG_E0_ENABLE_PIN 24
#define ORIG_E1_STEP_PIN 36
#define ORIG_E1_DIR_PIN 34
#define ORIG_E1_ENABLE_PIN 30
#define ORIG_E1_STEP_PIN 36
#define ORIG_E1_DIR_PIN 34
#define ORIG_E1_ENABLE_PIN 30
#define SDPOWER -1
#define SDSS 53
#define LED_PIN 13
#define SDPOWER -1
#define SDSS 53
#define LED_PIN 13
#define ORIG_FAN_PIN 9
#define PS_ON_PIN 12
#define ORIG_FAN_PIN 9
#define PS_ON_PIN 12
#define HEATER_0_PIN 10 // HOTEND 1
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define HEATER_3_PIN -1
#define HEATER_0_PIN 10 // HOTEND 1
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define HEATER_3_PIN -1
#define TEMP_0_PIN 13 // ANALOG NUMBERING
#define TEMP_1_PIN 15 // ANALOG NUMBERING
#define TEMP_2_PIN -1 // ANALOG NUMBERING
#define TEMP_3_PIN -1 // ANALOG NUMBERING
#define TEMP_0_PIN 13 // ANALOG NUMBERING
#define TEMP_1_PIN 15 // ANALOG NUMBERING
#define TEMP_2_PIN -1 // ANALOG NUMBERING
#define TEMP_3_PIN -1 // ANALOG NUMBERING
#define HEATER_BED_PIN -1 // BED
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
#define HEATER_BED_PIN -1 // BED
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
#if NUM_SERVOS > 0
#define SERVO0_PIN 11
#define SERVO0_PIN 11
#if NUM_SERVOS > 1
#define SERVO1_PIN 6
#define SERVO1_PIN 6
#if NUM_SERVOS > 2
#define SERVO2_PIN 5
#define SERVO2_PIN 5
#if NUM_SERVOS > 3
#define SERVO3_PIN 4
#define SERVO3_PIN 4
#endif
#endif
#endif
......@@ -1316,42 +1342,53 @@
#ifdef ULTRA_LCD
#ifdef NEWPANEL
#ifdef PANEL_ONE
#define LCD_PINS_RS 40
#define LCD_PINS_RS 40
#define LCD_PINS_ENABLE 42
#define LCD_PINS_D4 65
#define LCD_PINS_D5 66
#define LCD_PINS_D6 44
#define LCD_PINS_D7 64
#define LCD_PINS_D4 65
#define LCD_PINS_D5 66
#define LCD_PINS_D6 44
#define LCD_PINS_D7 64
#else
#define LCD_PINS_RS 16
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#endif //PANEL_ONE
#ifdef REPRAP_DISCOUNT_SMART_CONTROLLER
#define BEEPER 37
#define BEEPER 37
#define BTN_EN1 31
#define BTN_EN2 33
#define BTN_ENC 35
#define BTN_EN1 31
#define BTN_EN2 33
#define BTN_ENC 35
#define SDCARDDETECT 49
#define SDCARDDETECT 49
#elif defined(LCD_I2C_PANELOLU2)
#define BTN_EN1 47 //reverse if the encoder turns the wrong way.
#define BTN_EN2 43
#define BTN_ENC 32
#define LCD_SDSS 53
#define SDCARDDETECT -1
#define KILL_PIN 41
#define BTN_EN1 47 //reverse if the encoder turns the wrong way.
#define BTN_EN2 43
#define BTN_ENC 32
#define LCD_SDSS 53
#define SDCARDDETECT -1
#define KILL_PIN 41
#elif defined(LCD_I2C_VIKI)
#define BTN_EN1 22 //reverse if the encoder turns the wrong way.
#define BTN_EN2 7
#define BTN_ENC -1
#define LCD_SDSS 53
#define BTN_EN1 22 //reverse if the encoder turns the wrong way.
#define BTN_EN2 7
#define BTN_ENC -1
#define LCD_SDSS 53
#define SDCARDDETECT 49
#elif defined(ELB_FULL_GRAPHIC_CONTROLLER)
#define BTN_EN1 35 // reverse if the encoder turns the wrong way.
#define BTN_EN2 37
#define BTN_ENC 31
#define SDCARDDETECT 49
#define LCD_SDSS 53
#define KILL_PIN 41
#define BEEPER 23
#define DOGLCD_CS 29
#define DOGLCD_A0 27
#define LCD_PIN_BL 33
#else
//arduino pin which triggers an piezzo beeper
#define BEEPER 33 // Beeper on AUX-4
......@@ -1418,7 +1455,6 @@
/****************************************************************************************
* 36
* RAMPS 1.3 / 1.4
......@@ -1545,6 +1581,17 @@
#define BTN_ENC -1
#define LCD_SDSS 53
#define SDCARDDETECT 49
#elif defined(ELB_FULL_GRAPHIC_CONTROLLER)
#define BTN_EN1 35 // reverse if the encoder turns the wrong way.
#define BTN_EN2 37
#define BTN_ENC 31
#define SDCARDDETECT 49
#define LCD_SDSS 53
#define KILL_PIN 41
#define BEEPER 23
#define DOGLCD_CS 29
#define DOGLCD_A0 27
#define LCD_PIN_BL 33
#else
//arduino pin which triggers an piezzo beeper
#define BEEPER 33 // Beeper on AUX-4
......@@ -1955,19 +2002,19 @@
#define ORIG_X_DIR_PIN 62
#define ORIG_X_ENABLE_PIN 48
#define X_MIN_PIN 22
#define X_MAX_PIN 2
#define X_MAX_PIN 30
#define ORIG_Y_STEP_PIN 65
#define ORIG_Y_DIR_PIN 64
#define ORIG_Y_ENABLE_PIN 46
#define Y_MIN_PIN 24
#define Y_MAX_PIN 15
#define Y_MAX_PIN 38
#define ORIG_Z_STEP_PIN 67
#define ORIG_Z_DIR_PIN 66
#define ORIG_Z_ENABLE_PIN 44
#define Z_MIN_PIN 26
#define Z_MAX_PIN -1
#define Z_MAX_PIN 34
#define ORIG_E0_STEP_PIN 36
#define ORIG_E0_DIR_PIN 28
......@@ -2002,11 +2049,11 @@
#define HEATER_1_PIN 10
#define HEATER_2_PIN 11
#define TEMP_BED_PIN 0 // ANALOG NUMBERING
#define TEMP_BED_PIN 7 // ANALOG NUMBERING
#define TEMP_0_PIN 1 // ANALOG NUMBERING
#define TEMP_1_PIN -1 // 2 // ANALOG NUMBERING
#define TEMP_2_PIN -1 // 3 // ANALOG NUMBERING
#define TEMP_0_PIN 6 // ANALOG NUMBERING
#define TEMP_1_PIN 5 // 2 // ANALOG NUMBERING
#define TEMP_2_PIN 4 // 3 // ANALOG NUMBERING
#define TEMP_3_PIN -1 // ANALOG NUMBERING
#define TEMP_4_PIN -1 // ANALOG NUMBERING
......@@ -2334,6 +2381,21 @@
#endif //REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
#ifdef NUM_SERVOS
#define SERVO0_PIN 36
#if NUM_SERVOS > 1
#define SERVO1_PIN 40
#endif
#if NUM_SERVOS > 2
#define SERVO2_PIN 41
#endif
#if NUM_SERVOS > 3
#define SERVO3_PIN -1
#endif
#endif
#endif //ALLIGATOR
/****************************************************************************************/
......@@ -3374,32 +3436,36 @@
#define ORIG_X_STEP_PIN 58
#define ORIG_X_DIR_PIN 57
#define ORIG_X_ENABLE_PIN 59
#define X_MIN_PIN 37
#define X_MAX_PIN 40 //2 //Max endstops default to disabled "-1", set to commented value to enable.
#define X_MIN_PIN 37
#define X_MAX_PIN 40 //2 //Max endstops default to disabled "-1", set to commented value to enable.
#define ORIG_Y_STEP_PIN 5 // A6
#define ORIG_Y_STEP_PIN 5 // A6
#define ORIG_Y_DIR_PIN 17 // A0
#define ORIG_Y_ENABLE_PIN 4
#define Y_MIN_PIN 41
#define Y_MAX_PIN 38 //15
#define ORIG_Y_ENABLE_PIN 4
#define Y_MIN_PIN 41
#define Y_MAX_PIN 38 //15
#define ORIG_Z_STEP_PIN 16 // A2
#define ORIG_Z_DIR_PIN 11 // A6
#define ORIG_Z_ENABLE_PIN 3 // A1
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
#define ORIG_E0_STEP_PIN 28
#define ORIG_E0_DIR_PIN 27
#define ORIG_E0_ENABLE_PIN 29
#define ORIG_E0_STEP_PIN 28
#define ORIG_E0_DIR_PIN 27
#define ORIG_E0_ENABLE_PIN 29
#define ORIG_E1_STEP_PIN 25
#define ORIG_E1_DIR_PIN 24
#define ORIG_E1_ENABLE_PIN 26
#define ORIG_E1_STEP_PIN 25
#define ORIG_E1_DIR_PIN 24
#define ORIG_E1_ENABLE_PIN 26
#define ORIG_E2_STEP_PIN 22
#define ORIG_E2_DIR_PIN 60
#define ORIG_E2_ENABLE_PIN 23
#define ORIG_E2_STEP_PIN 22
#define ORIG_E2_DIR_PIN 60
#define ORIG_E2_ENABLE_PIN 23
#define ORIG_E3_STEP_PIN 54
#define ORIG_E3_DIR_PIN 55
#define ORIG_E3_ENABLE_PI 55
#define SDPOWER -1
#define SDSS 53
......
MarlinKimbra/pins2tool.h
View file @ c260d3f4
......@@ -44,7 +44,9 @@
//FAN pin
#define FAN_PIN ORIG_FAN_PIN
//============================================================================
//============================================================================
MarlinKimbra/planner.cpp
View file @ c260d3f4
......@@ -61,7 +61,6 @@
millis_t minsegmenttime;
float max_feedrate[3 + EXTRUDERS]; // Max speeds in mm per minute
float max_retraction_feedrate[EXTRUDERS]; // set the max speeds for retraction
float axis_steps_per_unit[3 + EXTRUDERS];
unsigned long max_acceleration_units_per_sq_second[3 + EXTRUDERS]; // Use M201 to override by software
float minimumfeedrate;
......@@ -432,11 +431,12 @@ void check_axes_activity() {
#ifdef FAN_KICKSTART_TIME
static millis_t fan_kick_end;
if (tail_fan_speed) {
millis_t ms = millis();
if (fan_kick_end == 0) {
// Just starting up fan - run at full power.
fan_kick_end = millis() + FAN_KICKSTART_TIME;
fan_kick_end = ms + FAN_KICKSTART_TIME;
tail_fan_speed = 255;
} else if (fan_kick_end > millis())
} else if (fan_kick_end > ms)
// Fan still spinning up.
tail_fan_speed = 255;
} else {
......@@ -478,18 +478,14 @@ float junction_deviation = 0.1;
void plan_buffer_line(float x, float y, float z, const float &e, float feed_rate, const uint8_t &extruder, const uint8_t &driver)
#else
void plan_buffer_line(const float &x, const float &y, const float &z, const float &e, float feed_rate, const uint8_t &extruder, const uint8_t &driver)
#endif //ENABLE_AUTO_BED_LEVELING
#endif // ENABLE_AUTO_BED_LEVELING
{
// Calculate the buffer head after we push this byte
int next_buffer_head = next_block_index(block_buffer_head);
// If the buffer is full: good! That means we are well ahead of the robot.
// Rest here until there is room in the buffer.
while(block_buffer_tail == next_buffer_head) {
manage_heater();
manage_inactivity();
lcd_update();
}
while (block_buffer_tail == next_buffer_head) idle();
#ifdef ENABLE_AUTO_BED_LEVELING
apply_rotation_xyz(plan_bed_level_matrix, x, y, z);
......@@ -513,13 +509,12 @@ float junction_deviation = 0.1;
if (de) {
#ifdef NPR2
if (extruder != 1)
#endif // NPR2
#endif
{
if (degHotend(extruder) < extrude_min_temp && !(debugLevel & DEBUG_DRYRUN)) {
position[E_AXIS] = target[E_AXIS]; //behave as if the move really took place, but ignore E part
de = 0; // no difference
ECHO_S(OK);
ECHO_EM(MSG_ERR_COLD_EXTRUDE_STOP);
ECHO_LM(ER, MSG_ERR_COLD_EXTRUDE_STOP);
}
}
......@@ -530,8 +525,7 @@ float junction_deviation = 0.1;
#endif
position[E_AXIS] = target[E_AXIS]; // Behave as if the move really took place, but ignore E part
de = 0; // no difference
ECHO_S(OK);
ECHO_EM(MSG_ERR_LONG_EXTRUDE_STOP);
ECHO_LM(ER, MSG_ERR_LONG_EXTRUDE_STOP);
#ifdef EASY_LOAD
}
allow_lengthy_extrude_once = false;
......@@ -574,7 +568,7 @@ float junction_deviation = 0.1;
block->valve_pressure = ValvePressure;
block->e_to_p_pressure = EtoPPressure;
#endif
// Add update block variables for LASER BEAM control
#ifdef LASERBEAM
block->laser_ttlmodulation = laser_ttl_modulation;
......@@ -693,7 +687,6 @@ float junction_deviation = 0.1;
break;
}
#endif //!MKR4 && !NPR2
if (feed_rate < minimumfeedrate) feed_rate = minimumfeedrate;
}
if (block->steps[E_AXIS])
......@@ -796,24 +789,12 @@ float junction_deviation = 0.1;
// Calculate and limit speed in mm/sec for each axis
float current_speed[NUM_AXIS];
float speed_factor = 1.0; //factor <=1 do decrease speed
for (int i = 0; i < 3; i++) {
for (int i = 0; i < NUM_AXIS; i++) {
current_speed[i] = delta_mm[i] * inverse_second;
float cs = fabs(current_speed[i]), mf = max_feedrate[i];
if (cs > mf) speed_factor = min(speed_factor, mf / cs);
}
current_speed[E_AXIS] = delta_mm[E_AXIS] * inverse_second;
if (target[E_AXIS] < position[E_AXIS])
{
if(fabs(current_speed[E_AXIS]) > max_retraction_feedrate[extruder])
speed_factor = min(speed_factor, max_retraction_feedrate[extruder]/ fabs(current_speed[E_AXIS]));
}
else
{
if(fabs(current_speed[E_AXIS]) > max_feedrate[E_AXIS + extruder])
speed_factor = min(speed_factor, max_feedrate[E_AXIS + extruder] / fabs(current_speed[E_AXIS]));
}
// Max segement time in us.
#ifdef XY_FREQUENCY_LIMIT
#define MAX_FREQ_TIME (1000000.0 / XY_FREQUENCY_LIMIT)
......@@ -1028,11 +1009,14 @@ float junction_deviation = 0.1;
#endif // ENABLE_AUTO_BED_LEVELING
#ifdef ENABLE_AUTO_BED_LEVELING
void plan_set_position(float x, float y, float z, const float &e) {
apply_rotation_xyz(plan_bed_level_matrix, x, y, z);
void plan_set_position(float x, float y, float z, const float &e)
#else
void plan_set_position(const float &x, const float &y, const float &z, const float &e) {
void plan_set_position(const float &x, const float &y, const float &z, const float &e)
#endif // ENABLE_AUTO_BED_LEVELING
{
#ifdef ENABLE_AUTO_BED_LEVELING
apply_rotation_xyz(plan_bed_level_matrix, x, y, z);
#endif
float nx = position[X_AXIS] = lround(x * axis_steps_per_unit[X_AXIS]),
ny = position[Y_AXIS] = lround(y * axis_steps_per_unit[Y_AXIS]),
......@@ -1051,6 +1035,6 @@ void plan_set_e_position(const float &e) {
// Calculate the steps/s^2 acceleration rates, based on the mm/s^s
void reset_acceleration_rates() {
for (int i = 0; i < 3 + EXTRUDERS; i++)
for (int i = 0; i < 3 + EXTRUDERS; i++)
axis_steps_per_sqr_second[i] = max_acceleration_units_per_sq_second[i] * axis_steps_per_unit[i];
}
MarlinKimbra/planner.h
View file @ c260d3f4
......@@ -114,9 +114,12 @@ FORCE_INLINE uint8_t movesplanned() { return BLOCK_MOD(block_buffer_head - block
void plan_set_e_position(const float &e);
//===========================================================================
//============================= public variables ============================
//===========================================================================
extern millis_t minsegmenttime;
extern float max_feedrate[3 + EXTRUDERS]; // set the max speeds
extern float max_retraction_feedrate[EXTRUDERS]; // set the max speeds for retraction
extern float axis_steps_per_unit[3 + EXTRUDERS];
extern unsigned long max_acceleration_units_per_sq_second[3 + EXTRUDERS]; // Use M201 to override by software
extern float minimumfeedrate;
......
MarlinKimbra/sanitycheck.h
View file @ c260d3f4
......@@ -124,7 +124,7 @@
* Require a Z Min pin
*/
#if Z_MIN_PIN == -1
#if Z_PROBE_PIN == -1 || (!defined(Z_PROBE_ENDSTOP) || defined(DISABLE_Z_PROBE_ENDSTOP)) // It's possible for someone to set a pin for the Z Probe, but not enable it.
#if Z_PROBE_PIN == -1 || defined(Z_PROBE_ENDSTOP) // It's possible for someone to set a pin for the Z Probe, but not enable it.
#ifdef Z_PROBE_REPEATABILITY_TEST
#error You must have a Z_MIN or Z_PROBE endstop to enable Z_PROBE_REPEATABILITY_TEST.
#else
......@@ -236,20 +236,13 @@
*/
#if defined(DELTA) && defined(Z_PROBE_ENDSTOP)
#ifndef Z_PROBE_PIN
#error You must have a Z_PROBE_PIN defined in your pins_XXXX.h file if you enable Z_PROBE_ENDSTOP
#error You must have a Z_PROBE_PIN defined in your pins2tool.h file if you enable Z_PROBE_ENDSTOP
#endif
#if Z_PROBE_PIN == -1
#error You must set Z_PROBE_PIN to a valid pin if you enable Z_PROBE_ENDSTOP
#endif
#endif
/**
* Allen Key Z Probe requires Auto Bed Leveling grid and Delta
*/
#if defined(Z_PROBE_ALLEN_KEY) && !(defined(AUTO_BED_LEVELING_GRID) && defined(DELTA))
#error Invalid use of Z_PROBE_ALLEN_KEY.
#endif
/**
* Dual X Carriage requirements
*/
......@@ -304,4 +297,23 @@
#error HEATER_0_PIN not defined for this board
#endif
/**
* Warnings for old configurations
*/
#ifdef X_HOME_RETRACT_MM
#error [XYZ]_HOME_RETRACT_MM settings have been renamed [XYZ]_HOME_BUMP_MM
#endif
#if WATCH_TEMP_PERIOD > 500
#error WATCH_TEMP_PERIOD now uses seconds instead of milliseconds
#endif
#if !defined(THERMAL_PROTECTION_HOTENDS) && (defined(WATCH_TEMP_PERIOD) || defined(THERMAL_PROTECTION_PERIOD))
#error Thermal Runaway Protection for hotends must now be enabled with THERMAL_PROTECTION_HOTENDS
#endif
#if !defined(THERMAL_PROTECTION_BED) && defined(THERMAL_PROTECTION_BED_PERIOD)
#error Thermal Runaway Protection for the bed must now be enabled with THERMAL_PROTECTION_BED
#endif
#endif //SANITYCHECK_H
MarlinKimbra/servo.h
View file @ c260d3f4
/*
Servo.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2
servo.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2
Copyright (c) 2009 Michael Margolis. All right reserved.
This library is free software; you can redistribute it and/or
......
MarlinKimbra/stepper.cpp
View file @ c260d3f4
/*
stepper.c - stepper motor driver: executes motion plans using stepper motors
Part of Grbl
Copyright (c) 2009-2011 Simen Svale Skogsrud
Grbl is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
Grbl is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
*/
/**
* stepper.cpp - stepper motor driver: executes motion plans using stepper motors
* Marlin Firmware
*
* Derived from Grbl
* Copyright (c) 2009-2011 Simen Svale Skogsrud
*
* Grbl is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* Grbl is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Grbl. If not, see <http://www.gnu.org/licenses/>.
*/
/* The timer calculations of this module informed by the 'RepRap cartesian firmware' by Zack Smith
and Philipp Tiefenbacher. */
......@@ -45,7 +46,7 @@ block_t *current_block; // A pointer to the block currently being traced
//static makes it impossible to be called from outside of this file by extern.!
// Variables used by The Stepper Driver Interrupt
static unsigned char out_bits; // The next stepping-bits to be output
static unsigned char out_bits = 0; // The next stepping-bits to be output
static unsigned int cleaning_buffer_counter;
#ifdef Z_DUAL_ENDSTOPS
......@@ -73,14 +74,12 @@ static unsigned short step_loops_nominal;
volatile long endstops_trigsteps[3] = { 0 };
volatile long endstops_stepsTotal, endstops_stepsDone;
static volatile bool endstop_x_hit = false;
static volatile bool endstop_y_hit = false;
static volatile bool endstop_z_hit = false;
static volatile bool endstop_z_probe_hit = false;
static volatile char endstop_hit_bits = 0; // use X_MIN, Y_MIN, Z_MIN and Z_PROBE as BIT value
#ifdef NPR2
static volatile bool endstop_e_hit = false;
static bool old_e_min_endstop = false;
#ifndef Z_DUAL_ENDSTOPS
static byte old_endstop_bits = 0; // use X_MIN, X_MAX... Z_MAX, Z_PROBE, Z2_MIN, Z2_MAX
#else
static uint16_t old_endstop_bits = 0; // use X_MIN, X_MAX... Z_MAX, Z_PROBE, Z2_MIN, Z2_MAX
#endif
#ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
......@@ -91,31 +90,6 @@ static volatile bool endstop_z_probe_hit = false;
int motor_current_setting[3] = DEFAULT_PWM_MOTOR_CURRENT;
#endif
#if HAS_X_MIN
static bool old_x_min_endstop = false;
#endif
#if HAS_X_MAX
static bool old_x_max_endstop = false;
#endif
#if HAS_Y_MIN
static bool old_y_min_endstop = false;
#endif
#if HAS_Y_MAX
static bool old_y_max_endstop = false;
#endif
static bool old_z_min_endstop = false;
static bool old_z_max_endstop = false;
#ifdef Z_DUAL_ENDSTOPS
static bool old_z2_min_endstop = false;
static bool old_z2_max_endstop = false;
#endif
#ifdef Z_PROBE_ENDSTOP // No need to check for valid pin, SanityCheck.h already does this.
static bool old_z_probe_endstop = false;
#endif
static bool check_endstops = true;
volatile long count_position[NUM_AXIS] = { 0 };
......@@ -162,11 +136,11 @@ volatile signed char count_direction[NUM_AXIS] = { 1, 1, 1, 1 };
#define Z_APPLY_STEP(v,Q) \
if (performing_homing) { \
if (Z_HOME_DIR > 0) {\
if (!(old_z_max_endstop && (count_direction[Z_AXIS] > 0)) && !locked_z_motor) Z_STEP_WRITE(v); \
if (!(old_z2_max_endstop && (count_direction[Z_AXIS] > 0)) && !locked_z2_motor) Z2_STEP_WRITE(v); \
if (!(TEST(old_endstop_bits, Z_MAX) && (count_direction[Z_AXIS] > 0)) && !locked_z_motor) Z_STEP_WRITE(v); \
if (!(TEST(old_endstop_bits, Z2_MAX) && (count_direction[Z_AXIS] > 0)) && !locked_z2_motor) Z2_STEP_WRITE(v); \
} else {\
if (!(old_z_min_endstop && (count_direction[Z_AXIS] < 0)) && !locked_z_motor) Z_STEP_WRITE(v); \
if (!(old_z2_min_endstop && (count_direction[Z_AXIS] < 0)) && !locked_z2_motor) Z2_STEP_WRITE(v); \
if (!(TEST(old_endstop_bits, Z_MIN) && (count_direction[Z_AXIS] < 0)) && !locked_z_motor) Z_STEP_WRITE(v); \
if (!(TEST(old_endstop_bits, Z2_MIN) && (count_direction[Z_AXIS] < 0)) && !locked_z2_motor) Z2_STEP_WRITE(v); \
} \
} else { \
Z_STEP_WRITE(v); \
......@@ -268,81 +242,36 @@ volatile signed char count_direction[NUM_AXIS] = { 1, 1, 1, 1 };
#define ENABLE_STEPPER_DRIVER_INTERRUPT() TIMSK1 |= BIT(OCIE1A)
#define DISABLE_STEPPER_DRIVER_INTERRUPT() TIMSK1 &= ~BIT(OCIE1A)
#ifdef NPR2
void endstops_hit_on_purpose() {
endstop_x_hit = endstop_y_hit = endstop_z_hit = endstop_z_probe_hit = endstop_e_hit = false;
endstop_hit_bits = 0;
}
void checkHitEndstops() {
if (endstop_x_hit || endstop_y_hit || endstop_z_hit || endstop_z_probe_hit || endstop_e_hit) {
ECHO_SM(OK, MSG_ENDSTOPS_HIT);
if(endstop_x_hit) {
if (endstop_hit_bits) {
ECHO_SM(DB, MSG_ENDSTOPS_HIT);
if (endstop_hit_bits & BIT(X_MIN)) {
ECHO_MV(MSG_ENDSTOP_X, (float)endstops_trigsteps[X_AXIS] / axis_steps_per_unit[X_AXIS]);
LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT MSG_ENDSTOP_XS);
}
if(endstop_y_hit) {
if (endstop_hit_bits & BIT(Y_MIN)) {
ECHO_MV(MSG_ENDSTOP_Y, (float)endstops_trigsteps[Y_AXIS] / axis_steps_per_unit[Y_AXIS]);
LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT MSG_ENDSTOP_YS);
}
if(endstop_z_hit) {
if (endstop_hit_bits & BIT(Z_MIN)) {
ECHO_MV(MSG_ENDSTOP_Z, (float)endstops_trigsteps[Z_AXIS] / axis_steps_per_unit[Z_AXIS]);
LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT MSG_ENDSTOP_ZS);
}
#ifdef Z_PROBE_ENDSTOP
if (endstop_z_probe_hit) {
ECHO_MV(" Z_PROBE:", (float)endstops_trigsteps[Z_AXIS] / axis_steps_per_unit[Z_AXIS]);
if (endstop_hit_bits & BIT(Z_PROBE)) {
ECHO_MV(MSG_ENDSTOP_ZPS, (float)endstops_trigsteps[Z_AXIS] / axis_steps_per_unit[Z_AXIS]);
LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT MSG_ENDSTOP_ZPS);
}
#endif
if(endstop_e_hit) {
#ifdef NPR2
if (endstop_hit_bits & BIT(E_MIN)) {
ECHO_MV(MSG_ENDSTOP_E, (float)endstops_trigsteps[E_AXIS] / axis_steps_per_unit[E_AXIS]);
LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT MSG_ENDSTOP_ES);
}
ECHO_E;
endstops_hit_on_purpose();
#if defined(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) && defined(SDSUPPORT)
if (abort_on_endstop_hit) {
card.sdprinting = false;
card.closeFile();
quickStop();
setTargetHotend0(0);
setTargetHotend1(0);
setTargetHotend2(0);
setTargetHotend3(0);
setTargetBed(0);
}
#endif
}
}
#else // NOT NPR2
void endstops_hit_on_purpose() {
endstop_x_hit = endstop_y_hit = endstop_z_hit = endstop_z_probe_hit = false;
}
void checkHitEndstops() {
if (endstop_x_hit || endstop_y_hit || endstop_z_hit || endstop_z_probe_hit) {
ECHO_SM(OK, MSG_ENDSTOPS_HIT);
if (endstop_x_hit) {
ECHO_MV(MSG_ENDSTOP_X, (float)endstops_trigsteps[X_AXIS] / axis_steps_per_unit[X_AXIS]);
LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT MSG_ENDSTOP_XS);
}
if (endstop_y_hit) {
ECHO_MV(MSG_ENDSTOP_Y, (float)endstops_trigsteps[Y_AXIS] / axis_steps_per_unit[Y_AXIS]);
LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT MSG_ENDSTOP_YS);
}
if (endstop_z_hit) {
ECHO_MV(MSG_ENDSTOP_Z, (float)endstops_trigsteps[Z_AXIS] / axis_steps_per_unit[Z_AXIS]);
LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT MSG_ENDSTOP_ZS);
}
#ifdef Z_PROBE_ENDSTOP
if (endstop_z_probe_hit) {
ECHO_MV(MSG_ENDSTOP_ZPS, (float)endstops_trigsteps[Z_AXIS] / axis_steps_per_unit[Z_AXIS]);
LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT MSG_ENDSTOP_ZPS);
}
#endif
ECHO_E;
......@@ -353,16 +282,11 @@ void checkHitEndstops() {
card.sdprinting = false;
card.closeFile();
quickStop();
setTargetHotend0(0);
setTargetHotend1(0);
setTargetHotend2(0);
setTargetHotend3(0);
setTargetBed(0);
disable_all_heaters(); // switch off all heaters.
}
#endif
}
}
#endif // NOT NPR2
void enable_endstops(bool check) { check_endstops = check; }
......@@ -422,9 +346,58 @@ FORCE_INLINE unsigned short calc_timer(unsigned short step_rate) {
return timer;
}
// set the stepper direction of each axis
void set_stepper_direction() {
// Set the direction bits (X_AXIS=A_AXIS and Y_AXIS=B_AXIS for COREXY)
if (TEST(out_bits, X_AXIS)) {
X_APPLY_DIR(INVERT_X_DIR,0);
count_direction[X_AXIS] = -1;
}
else {
X_APPLY_DIR(!INVERT_X_DIR,0);
count_direction[X_AXIS] = 1;
}
if (TEST(out_bits, Y_AXIS)) {
Y_APPLY_DIR(INVERT_Y_DIR,0);
count_direction[Y_AXIS] = -1;
}
else {
Y_APPLY_DIR(!INVERT_Y_DIR,0);
count_direction[Y_AXIS] = 1;
}
if (TEST(out_bits, Z_AXIS)) {
Z_APPLY_DIR(INVERT_Z_DIR,0);
count_direction[Z_AXIS] = -1;
}
else {
Z_APPLY_DIR(!INVERT_Z_DIR,0);
count_direction[Z_AXIS] = 1;
}
#ifndef ADVANCE
if (TEST(out_bits, E_AXIS)) {
REV_E_DIR();
count_direction[E_AXIS] = -1;
}
else {
NORM_E_DIR();
count_direction[E_AXIS] = 1;
}
#endif // !ADVANCE
}
// Initializes the trapezoid generator from the current block. Called whenever a new
// block begins.
FORCE_INLINE void trapezoid_generator_reset() {
if (current_block->direction_bits != out_bits) {
out_bits = current_block->direction_bits;
set_stepper_direction();
}
#ifdef ADVANCE
advance = current_block->initial_advance;
final_advance = current_block->final_advance;
......@@ -446,8 +419,7 @@ FORCE_INLINE void trapezoid_generator_reset() {
// It pops blocks from the block_buffer and executes them by pulsing the stepper pins appropriately.
ISR(TIMER1_COMPA_vect) {
if(cleaning_buffer_counter)
{
if(cleaning_buffer_counter) {
current_block = NULL;
plan_discard_current_block();
#ifdef SD_FINISHED_RELEASECOMMAND
......@@ -487,47 +459,37 @@ ISR(TIMER1_COMPA_vect) {
}
if (current_block != NULL) {
// Set directions TO DO This should be done once during init of trapezoid. Endstops -> interrupt
out_bits = current_block->direction_bits;
// Set the direction bits (X_AXIS=A_AXIS and Y_AXIS=B_AXIS for COREXY)
if (TEST(out_bits, X_AXIS)) {
X_APPLY_DIR(INVERT_X_DIR,0);
count_direction[X_AXIS] = -1;
}
else {
X_APPLY_DIR(!INVERT_X_DIR,0);
count_direction[X_AXIS] = 1;
}
if (TEST(out_bits, Y_AXIS)) {
Y_APPLY_DIR(INVERT_Y_DIR,0);
count_direction[Y_AXIS] = -1;
}
else {
Y_APPLY_DIR(!INVERT_Y_DIR,0);
count_direction[Y_AXIS] = 1;
}
// Check endstops
if (check_endstops) {
#define _ENDSTOP(axis, minmax) axis ##_## minmax ##_endstop
#define _ENDSTOP_PIN(AXIS, MINMAX) AXIS ##_## MINMAX ##_PIN
#define _ENDSTOP_INVERTING(AXIS, MINMAX) AXIS ##_## MINMAX ##_ENDSTOP_INVERTING
#define _OLD_ENDSTOP(axis, minmax) old_## axis ##_## minmax ##_endstop
#define _AXIS(AXIS) AXIS ##_AXIS
#define _ENDSTOP_HIT(axis) endstop_## axis ##_hit
#define UPDATE_ENDSTOP(axis,AXIS,minmax,MINMAX) \
bool _ENDSTOP(axis, minmax) = (READ(_ENDSTOP_PIN(AXIS, MINMAX)) != _ENDSTOP_INVERTING(AXIS, MINMAX)); \
if (_ENDSTOP(axis, minmax) && _OLD_ENDSTOP(axis, minmax) && (current_block->steps[_AXIS(AXIS)] > 0)) { \
endstops_trigsteps[_AXIS(AXIS)] = count_position[_AXIS(AXIS)]; \
_ENDSTOP_HIT(axis) = true; \
step_events_completed = current_block->step_event_count; \
} \
_OLD_ENDSTOP(axis, minmax) = _ENDSTOP(axis, minmax);
#ifdef Z_DUAL_ENDSTOPS
uint16_t current_endstop_bits = 0;
#else
byte current_endstop_bits = 0;
#endif
#define _ENDSTOP_PIN(AXIS, MINMAX) AXIS ##_## MINMAX ##_PIN
#define _ENDSTOP_INVERTING(AXIS, MINMAX) AXIS ##_## MINMAX ##_ENDSTOP_INVERTING
#define _AXIS(AXIS) AXIS ##_AXIS
#define _ENDSTOP_HIT(AXIS) endstop_hit_bits |= BIT(_ENDSTOP(AXIS, MIN))
#define _ENDSTOP(AXIS, MINMAX) AXIS ##_## MINMAX
// SET_ENDSTOP_BIT: set the current endstop bits for an endstop to its status
#define SET_ENDSTOP_BIT(AXIS, MINMAX) SET_BIT(current_endstop_bits, _ENDSTOP(AXIS, MINMAX), (READ(_ENDSTOP_PIN(AXIS, MINMAX)) != _ENDSTOP_INVERTING(AXIS, MINMAX)))
// COPY_BIT: copy the value of COPY_BIT to BIT in bits
#define COPY_BIT(bits, COPY_BIT, BIT) SET_BIT(bits, BIT, TEST(bits, COPY_BIT))
// TEST_ENDSTOP: test the old and the current status of an endstop
#define TEST_ENDSTOP(ENDSTOP) (TEST(current_endstop_bits, ENDSTOP) && TEST(old_endstop_bits, ENDSTOP))
#define UPDATE_ENDSTOP(AXIS,MINMAX) \
SET_ENDSTOP_BIT(AXIS, MINMAX); \
if (TEST_ENDSTOP(_ENDSTOP(AXIS, MINMAX)) && (current_block->steps[_AXIS(AXIS)] > 0)) { \
endstops_trigsteps[_AXIS(AXIS)] = count_position[_AXIS(AXIS)]; \
_ENDSTOP_HIT(AXIS); \
step_events_completed = current_block->step_event_count; \
}
// Check X and Y endstops
if (check_endstops) {
#ifdef COREXY
// Head direction in -X axis for CoreXY bots.
// If DeltaX == -DeltaY, the movement is only in Y axis
......@@ -543,7 +505,7 @@ ISR(TIMER1_COMPA_vect) {
#endif
{
#if HAS_X_MIN
UPDATE_ENDSTOP(x, X, min, MIN);
UPDATE_ENDSTOP(X, MIN);
#endif
}
}
......@@ -554,7 +516,7 @@ ISR(TIMER1_COMPA_vect) {
#endif
{
#if HAS_X_MAX
UPDATE_ENDSTOP(x, X, max, MAX);
UPDATE_ENDSTOP(X, MAX);
#endif
}
}
......@@ -569,144 +531,83 @@ ISR(TIMER1_COMPA_vect) {
#endif
{ // -direction
#if HAS_Y_MIN
UPDATE_ENDSTOP(y, Y, min, MIN);
UPDATE_ENDSTOP(Y, MIN);
#endif
}
else { // +direction
#if HAS_Y_MAX
UPDATE_ENDSTOP(y, Y, max, MAX);
UPDATE_ENDSTOP(Y, MAX);
#endif
}
#ifdef COREXY
}
#endif
}
if (TEST(out_bits, Z_AXIS)) { // -direction
Z_APPLY_DIR(INVERT_Z_DIR,0);
count_direction[Z_AXIS] = -1;
if (check_endstops) {
if (TEST(out_bits, Z_AXIS)) { // z -direction
#if HAS_Z_MIN
#ifdef Z_DUAL_ENDSTOPS
SET_ENDSTOP_BIT(Z, MIN);
#if HAS_Z2_MIN
SET_ENDSTOP_BIT(Z2, MIN);
#else
COPY_BIT(current_endstop_bits, Z_MIN, Z2_MIN)
#endif
byte z_test = TEST_ENDSTOP(Z_MIN) << 0 + TEST_ENDSTOP(Z2_MIN) << 1; // bit 0 for Z, bit 1 for Z2
bool z_min_endstop = READ(Z_MIN_PIN) != Z_MIN_ENDSTOP_INVERTING,
z2_min_endstop =
#if HAS_Z2_MIN
READ(Z2_MIN_PIN) != Z2_MIN_ENDSTOP_INVERTING
#else
z_min_endstop
#endif
;
bool z_min_both = z_min_endstop && old_z_min_endstop,
z2_min_both = z2_min_endstop && old_z2_min_endstop;
if ((z_min_both || z2_min_both) && current_block->steps[Z_AXIS] > 0) {
if (z_test && current_block->steps[Z_AXIS] > 0) { // z_test = Z_MIN || Z2_MIN
endstops_trigsteps[Z_AXIS] = count_position[Z_AXIS];
endstop_z_hit = true;
if (!performing_homing || (performing_homing && z_min_both && z2_min_both)) //if not performing home or if both endstops were trigged during homing...
endstop_hit_bits |= BIT(Z_MIN);
if (!performing_homing || (z_test == 0x3)) //if not performing home or if both endstops were trigged during homing...
step_events_completed = current_block->step_event_count;
}
old_z_min_endstop = z_min_endstop;
old_z2_min_endstop = z2_min_endstop;
#else // !Z_DUAL_ENDSTOPS
UPDATE_ENDSTOP(z, Z, min, MIN);
UPDATE_ENDSTOP(Z, MIN);
#endif // !Z_DUAL_ENDSTOPS
#endif // Z_MIN_PIN
#ifdef Z_PROBE_ENDSTOP
UPDATE_ENDSTOP(z, Z, probe, PROBE);
z_probe_endstop = (READ(Z_PROBE_PIN) != Z_PROBE_ENDSTOP_INVERTING);
if (z_probe_endstop && old_z_probe_endstop)
{
endstops_trigsteps[Z_AXIS] = count_position[Z_AXIS];
endstop_z_probe_hit = true;
UPDATE_ENDSTOP(Z, PROBE);
// if (z_probe_endstop && old_z_probe_endstop) ECHO_EV("z_probe_endstop = true");
if (TEST_ENDSTOP(Z_PROBE)) {
endstops_trigsteps[Z_AXIS] = count_position[Z_AXIS];
endstop_hit_bits |= BIT(Z_PROBE);
}
old_z_probe_endstop = z_probe_endstop;
#endif
} // check_endstops
}
else { // +direction
Z_APPLY_DIR(!INVERT_Z_DIR,0);
count_direction[Z_AXIS] = 1;
if (check_endstops) {
}
else { // z +direction
#if HAS_Z_MAX
#ifdef Z_DUAL_ENDSTOPS
bool z_max_endstop = READ(Z_MAX_PIN) != Z_MAX_ENDSTOP_INVERTING,
z2_max_endstop =
#if HAS_Z2_MAX
READ(Z2_MAX_PIN) != Z2_MAX_ENDSTOP_INVERTING
#else
z_max_endstop
#endif
;
bool z_max_both = z_max_endstop && old_z_max_endstop,
z2_max_both = z2_max_endstop && old_z2_max_endstop;
if ((z_max_both || z2_max_both) && current_block->steps[Z_AXIS] > 0) {
endstops_trigsteps[Z_AXIS] = count_position[Z_AXIS];
endstop_z_hit = true;
SET_ENDSTOP_BIT(Z, MAX);
#if HAS_Z2_MAX
SET_ENDSTOP_BIT(Z2, MAX);
#else
COPY_BIT(current_endstop_bits, Z_MAX, Z2_MAX)
#endif
// if (z_max_both) ECHO_EV("z_max_endstop = true");
// if (z2_max_both) ECHO_EV("z2_max_endstop = true");
byte z_test = TEST_ENDSTOP(Z_MAX) << 0 + TEST_ENDSTOP(Z2_MAX) << 1; // bit 0 for Z, bit 1 for Z2
if (!performing_homing || (performing_homing && z_max_both && z2_max_both)) //if not performing home or if both endstops were trigged during homing...
if (z_test && current_block->steps[Z_AXIS] > 0) { // t_test = Z_MAX || Z2_MAX
endstops_trigsteps[Z_AXIS] = count_position[Z_AXIS];
endstop_hit_bits |= BIT(Z_MIN);
if (!performing_homing || (z_test == 0x3)) //if not performing home or if both endstops were trigged during homing...
step_events_completed = current_block->step_event_count;
}
old_z_max_endstop = z_max_endstop;
old_z2_max_endstop = z2_max_endstop;
#else // !Z_DUAL_ENDSTOPS
UPDATE_ENDSTOP(z, Z, max, MAX);
UPDATE_ENDSTOP(Z, MAX);
#endif // !Z_DUAL_ENDSTOPS
#endif // Z_MAX_PIN
} // check_endstops
} // +direction
#ifndef ADVANCE
if (TEST(out_bits, E_AXIS)) { // -direction
REV_E_DIR();
count_direction[E_AXIS] = -1;
#ifdef NPR2
if (check_endstops) {
#if defined(E_MIN_PIN) && E_MIN_PIN > -1
bool e_min_endstop=(READ(E_MIN_PIN) != E_MIN_ENDSTOP_INVERTING);
if (e_min_endstop && old_e_min_endstop && (current_block->steps[E_AXIS] > 0)) {
endstops_trigsteps[E_AXIS] = count_position[E_AXIS];
endstop_e_hit = true;
step_events_completed = current_block->step_event_count;
}
old_e_min_endstop = e_min_endstop;
#endif
}
#endif
}
else { // +direction
NORM_E_DIR();
count_direction[E_AXIS] = 1;
}
#endif //!ADVANCE
old_endstop_bits = current_endstop_bits;
}
// Take multiple steps per interrupt (For high speed moves)
for (int8_t i = 0; i < step_loops; i++) {
......@@ -726,29 +627,33 @@ ISR(TIMER1_COMPA_vect) {
#define _APPLY_STEP(AXIS) AXIS ##_APPLY_STEP
#define _INVERT_STEP_PIN(AXIS) INVERT_## AXIS ##_STEP_PIN
#define STEP_ADD(axis, AXIS) \
#define STEP_START(axis, AXIS) \
_COUNTER(axis) += current_block->steps[_AXIS(AXIS)]; \
if (_COUNTER(axis) > 0) { _APPLY_STEP(AXIS)(!_INVERT_STEP_PIN(AXIS),0); }
STEP_ADD(x,X);
STEP_ADD(y,Y);
STEP_ADD(z,Z);
STEP_START(x,X);
STEP_START(y,Y);
STEP_START(z,Z);
#ifndef ADVANCE
STEP_ADD(e,E);
STEP_START(e,E);
#endif
#define STEP_IF_COUNTER(axis, AXIS) \
#ifdef STEPPER_HIGH_LOW_DELAY
delayMicroseconds(STEPPER_HIGH_LOW_DELAY);
#endif
#define STEP_END(axis, AXIS) \
if (_COUNTER(axis) > 0) { \
_COUNTER(axis) -= current_block->step_event_count; \
count_position[_AXIS(AXIS)] += count_direction[_AXIS(AXIS)]; \
_APPLY_STEP(AXIS)(_INVERT_STEP_PIN(AXIS),0); \
}
STEP_IF_COUNTER(x, X);
STEP_IF_COUNTER(y, Y);
STEP_IF_COUNTER(z, Z);
STEP_END(x, X);
STEP_END(y, Y);
STEP_END(z, Z);
#ifndef ADVANCE
STEP_IF_COUNTER(e, E);
STEP_END(e, E);
#endif
step_events_completed++;
......@@ -1005,21 +910,21 @@ void st_init() {
#if HAS_X_MIN
SET_INPUT(X_MIN_PIN);
#ifdef ENDSTOPPULLUP_XMIN
WRITE(X_MIN_PIN, HIGH);
WRITE(X_MIN_PIN,HIGH);
#endif
#endif
#if HAS_Y_MIN
SET_INPUT(Y_MIN_PIN);
#ifdef ENDSTOPPULLUP_YMIN
WRITE(Y_MIN_PIN, HIGH);
WRITE(Y_MIN_PIN,HIGH);
#endif
#endif
#if HAS_Z_MIN
SET_INPUT(Z_MIN_PIN);
#ifdef ENDSTOPPULLUP_ZMIN
WRITE(Z_MIN_PIN, HIGH);
WRITE(Z_MIN_PIN,HIGH);
#endif
#endif
......@@ -1033,37 +938,37 @@ void st_init() {
#if HAS_X_MAX
SET_INPUT(X_MAX_PIN);
#ifdef ENDSTOPPULLUP_XMAX
WRITE(X_MAX_PIN, HIGH);
WRITE(X_MAX_PIN,HIGH);
#endif
#endif
#if HAS_Y_MAX
SET_INPUT(Y_MAX_PIN);
#ifdef ENDSTOPPULLUP_YMAX
WRITE(Y_MAX_PIN, HIGH);
WRITE(Y_MAX_PIN,HIGH);
#endif
#endif
#if HAS_Z_MAX
SET_INPUT(Z_MAX_PIN);
#ifdef ENDSTOPPULLUP_ZMAX
WRITE(Z_MAX_PIN, HIGH);
WRITE(Z_MAX_PIN,HIGH);
#endif
#endif
#if HAS_Z2_MAX
SET_INPUT(Z2_MAX_PIN);
#ifdef ENDSTOPPULLUP_ZMAX
WRITE(Z2_MAX_PIN, HIGH);
WRITE(Z2_MAX_PIN,HIGH);
#endif
#endif
#if (defined(Z_PROBE_PIN) && Z_PROBE_PIN >= 0) && defined(Z_PROBE_ENDSTOP) // Check for Z_PROBE_ENDSTOP so we don't pull a pin high unless it's to be used.
SET_INPUT(Z_PROBE_PIN);
#ifdef ENDSTOPPULLUP_ZPROBE
WRITE(Z_PROBE_PIN, HIGH);
#if HAS_Z_PROBE && defined(Z_PROBE_ENDSTOP) // Check for Z_PROBE_ENDSTOP so we don't pull a pin high unless it's to be used.
SET_INPUT(Z_PROBE_PIN);
#ifdef ENDSTOPPULLUP_ZPROBE
WRITE(Z_PROBE_PIN,HIGH);
#endif
#endif
#endif
#define _STEP_INIT(AXIS) AXIS ##_STEP_INIT
#define _WRITE_STEP(AXIS, HIGHLOW) AXIS ##_STEP_WRITE(HIGHLOW)
......@@ -1142,17 +1047,15 @@ void st_init() {
enable_endstops(true); // Start with endstops active. After homing they can be disabled
sei();
set_stepper_direction(); // Init directions to out_bits = 0
}
// Block until all buffered steps are executed
void st_synchronize() {
while (blocks_queued()) {
manage_heater();
manage_inactivity();
lcd_update();
}
}
/**
* Block until all buffered steps are executed
*/
void st_synchronize() { while (blocks_queued()) idle(); }
void st_set_position(const long &x, const long &y, const long &z, const long &e) {
CRITICAL_SECTION_START;
......@@ -1179,9 +1082,8 @@ long st_get_position(uint8_t axis) {
#ifdef ENABLE_AUTO_BED_LEVELING
float st_get_position_mm(uint8_t axis) {
float steper_position_in_steps = st_get_position(axis);
return steper_position_in_steps / axis_steps_per_unit[axis];
float st_get_position_mm(AxisEnum axis) {
return st_get_position(axis) / axis_steps_per_unit[axis];
}
#endif // ENABLE_AUTO_BED_LEVELING
......@@ -1382,7 +1284,7 @@ void microstep_ms(uint8_t driver, int8_t ms1, int8_t ms2) {
case 1: digitalWrite(Y_MS2_PIN, ms2); break;
case 2: digitalWrite(Z_MS2_PIN, ms2); break;
case 3: digitalWrite(E0_MS2_PIN, ms2); break;
#if defined(E1_MS2_PIN) && E1_MS2_PIN >= 0
#if PIN_EXISTS(E1_MS2)
case 4: digitalWrite(E1_MS2_PIN, ms2); break;
#endif
}
......@@ -1402,21 +1304,21 @@ void microstep_mode(uint8_t driver, uint8_t stepping_mode) {
}
void microstep_readings() {
ECHO_SM(OK, MSG_MICROSTEP_MS1_MS2);
ECHO_SM(DB, MSG_MICROSTEP_MS1_MS2);
ECHO_M(MSG_MICROSTEP_X);
ECHO_V(digitalRead(X_MS1_PIN));
ECHO_EV(digitalRead(X_MS2_PIN));
ECHO_SM(OK, MSG_MICROSTEP_Y);
ECHO_SM(DB, MSG_MICROSTEP_Y);
ECHO_V(digitalRead(Y_MS1_PIN));
ECHO_EV(digitalRead(Y_MS2_PIN));
ECHO_SM(OK, MSG_MICROSTEP_Z);
ECHO_SM(DB, MSG_MICROSTEP_Z);
ECHO_V(digitalRead(Z_MS1_PIN));
ECHO_EV(digitalRead(Z_MS2_PIN));
ECHO_SM(OK, MSG_MICROSTEP_E0);
ECHO_SM(DB, MSG_MICROSTEP_E0);
ECHO_V(digitalRead(E0_MS1_PIN));
ECHO_EV(digitalRead(E0_MS2_PIN));
#if HAS_MICROSTEPS_E1
ECHO_SM(OK, MSG_MICROSTEP_E1);
ECHO_SM(DB, MSG_MICROSTEP_E1);
ECHO_V(digitalRead(E1_MS1_PIN));
ECHO_EV(digitalRead(E1_MS2_PIN));
#endif
......
MarlinKimbra/stepper.h
View file @ c260d3f4
......@@ -54,7 +54,7 @@
#endif //DRIVER_EXTRUDERS
#ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
extern bool abort_on_endstop_hit;
extern bool abort_on_endstop_hit;
#endif
// Initialize and start the stepper motor subsystem
......@@ -71,9 +71,9 @@ void st_set_e_position(const long &e);
long st_get_position(uint8_t axis);
#ifdef ENABLE_AUTO_BED_LEVELING
// Get current position in mm
float st_get_position_mm(uint8_t axis);
#endif //ENABLE_AUTO_BED_LEVELING
// Get current position in mm
float st_get_position_mm(AxisEnum axis);
#endif
// The stepper subsystem goes to sleep when it runs out of things to execute. Call this
// to notify the subsystem that it is time to go to work.
......@@ -111,8 +111,8 @@ void microstep_readings();
void babystep(const uint8_t axis,const bool direction); // perform a short step with a single stepper motor, outside of any convention
#endif
#ifdef NPR2 //Multiextruder
#ifdef NPR2 // Multiextruder
void colorstep(long csteps,const bool direction);
#endif //NPR2
#endif
#endif //stepper_h
#endif // stepper_h
MarlinKimbra/stepper_indirection.cpp
View file @ c260d3f4
......@@ -23,8 +23,8 @@
#include "Configuration.h"
#ifdef HAVE_TMCDRIVER
#include <SPI.h>
#include <TMC26XStepper.h>
#include <SPI.h>
#include <TMC26XStepper.h>
#endif
// Stepper objects of TMC steppers used
......
MarlinKimbra/temperature.cpp
View file @ c260d3f4
......@@ -36,6 +36,7 @@
#if defined(PIDTEMPBED) || defined(PIDTEMP)
#define PID_dT ((OVERSAMPLENR * 14.0)/(F_CPU / 64.0 / 256.0))
#define RECI_PID_dT ( 1 / PID_dT )
#endif
//===========================================================================
......@@ -54,9 +55,9 @@ float current_temperature_bed = 0.0;
#endif
#ifdef PIDTEMPBED
float bedKp=DEFAULT_bedKp;
float bedKi=(DEFAULT_bedKi*PID_dT);
float bedKd=(DEFAULT_bedKd/PID_dT);
float bedKp = DEFAULT_bedKp;
float bedKi = (DEFAULT_bedKi * PID_dT);
float bedKd = (DEFAULT_bedKd / PID_dT);
#endif //PIDTEMPBED
#ifdef FAN_SOFT_PWM
......@@ -69,20 +70,19 @@ unsigned char soft_pwm_bed;
volatile int babystepsTodo[3] = { 0 };
#endif
#if HAS_FILAMENT_SENSOR
#ifdef FILAMENT_SENSOR
int current_raw_filwidth = 0; //Holds measured filament diameter - one extruder only
#endif
#define HAS_HEATER_THERMAL_PROTECTION (defined(THERMAL_RUNAWAY_PROTECTION_PERIOD) && THERMAL_RUNAWAY_PROTECTION_PERIOD > 0)
#define HAS_BED_THERMAL_PROTECTION (defined(THERMAL_RUNAWAY_PROTECTION_BED_PERIOD) && THERMAL_RUNAWAY_PROTECTION_BED_PERIOD > 0 && TEMP_SENSOR_BED != 0)
#if HAS_HEATER_THERMAL_PROTECTION || HAS_BED_THERMAL_PROTECTION
#if defined(THERMAL_PROTECTION_HOTENDS) || defined(THERMAL_PROTECTION_BED)
enum TRState { TRReset, TRInactive, TRFirstHeating, TRStable, TRRunaway };
static float tr_target_temperature[HOTENDS + 1] = { 0.0 };
void thermal_runaway_protection(TRState *state, millis_t *timer, float temperature, float target_temperature, int heater_id, int period_seconds, int hysteresis_degc);
#if HAS_HEATER_THERMAL_PROTECTION
#ifdef THERMAL_PROTECTION_HOTENDS
static TRState thermal_runaway_state_machine[4] = { TRReset, TRReset, TRReset, TRReset };
static millis_t thermal_runaway_timer[4]; // = {0,0,0,0};
#endif
#if HAS_BED_THERMAL_PROTECTION
#ifdef THERMAL_PROTECTION_BED
static TRState thermal_runaway_bed_state_machine = TRReset;
static millis_t thermal_runaway_bed_timer;
#endif
......@@ -95,6 +95,7 @@ unsigned char soft_pwm_bed;
//===========================================================================
//============================ private variables ============================
//===========================================================================
static volatile bool temp_meas_ready = false;
#ifdef PIDTEMP
......@@ -143,7 +144,9 @@ static int minttemp_raw[HOTENDS] = ARRAY_BY_HOTENDS( HEATER_0_RAW_LO_TEMP , HEAT
static int maxttemp_raw[HOTENDS] = ARRAY_BY_HOTENDS( HEATER_0_RAW_HI_TEMP , HEATER_1_RAW_HI_TEMP , HEATER_2_RAW_HI_TEMP, HEATER_3_RAW_HI_TEMP);
static int minttemp[HOTENDS] = { 0 };
static int maxttemp[HOTENDS] = ARRAY_BY_HOTENDS( 16383, 16383, 16383, 16383 );
//static int bed_minttemp_raw = HEATER_BED_RAW_LO_TEMP; /* No bed mintemp error implemented?!? */
#ifdef BED_MINTEMP
static int bed_minttemp_raw = HEATER_BED_RAW_LO_TEMP;
#endif
#ifdef BED_MAXTEMP
static int bed_maxttemp_raw = HEATER_BED_RAW_HI_TEMP;
#endif
......@@ -160,7 +163,7 @@ static float analog2temp(int raw, uint8_t e);
static float analog2tempBed(int raw);
static void updateTemperaturesFromRawValues();
#ifdef WATCH_TEMP_PERIOD
#ifdef THERMAL_PROTECTION_HOTENDS
int watch_target_temp[HOTENDS] = { 0 };
millis_t watch_heater_next_ms[HOTENDS] = { 0 };
#endif
......@@ -181,8 +184,7 @@ static void updateTemperaturesFromRawValues();
//================================ Functions ================================
//===========================================================================
void PID_autotune(float temp, int hotend, int ncycles)
{
void PID_autotune(float temp, int hotend, int ncycles) {
float input = 0.0;
int cycles = 0;
bool heating = true;
......@@ -245,8 +247,8 @@ void PID_autotune(float temp, int hotend, int ncycles)
}
#endif
if (heating == true && input > temp) {
if (ms - t2 > 5000) {
if (heating && input > temp) {
if (ms > t2 + 5000) {
heating = false;
if (hotend < 0)
soft_pwm_bed = (bias - d) >> 1;
......@@ -257,8 +259,9 @@ void PID_autotune(float temp, int hotend, int ncycles)
max = temp;
}
}
if (heating == false && input < temp) {
if (ms - t1 > 5000) {
if (!heating && input < temp) {
if (ms > t1 + 5000) {
heating = true;
t2 = ms;
t_low = t2 - t1;
......@@ -299,7 +302,7 @@ void PID_autotune(float temp, int hotend, int ncycles)
}
}
}
if (input > temp + 20) {
if (input > temp + MAX_OVERSHOOT_PID_AUTOTUNE) {
ECHO_LM(ER, MSG_PID_TEMP_TOO_HIGH);
return;
}
......@@ -310,12 +313,14 @@ void PID_autotune(float temp, int hotend, int ncycles)
if (hotend < 0) {
p = soft_pwm_bed;
ECHO_SMV(OK, MSG_B, input);
ECHO_EMV(MSG_AT, p);
ECHO_MV(" /", temp, 1);
ECHO_EMV(" " MSG_AT, p);
}
else {
p = soft_pwm[hotend];
ECHO_SMV(OK, MSG_T, input);
ECHO_EMV(MSG_AT, p);
ECHO_SMV(OK, MSG_T, input, 1);
ECHO_MV(" /", temp, 1);
ECHO_EMV(" " MSG_AT, p);
}
temp_ms = ms;
......@@ -356,7 +361,7 @@ void updatePID() {
}
#endif
#ifdef PIDTEMPBED
temp_iState_max_bed = PID_INTEGRAL_DRIVE_MAX / bedKi;
temp_iState_max_bed = PID_BED_INTEGRAL_DRIVE_MAX / bedKi;
#endif
}
......@@ -445,39 +450,40 @@ void checkExtruderAutoFans()
// Temperature Error Handlers
//
inline void _temp_error(int e, const char *serial_msg, const char *lcd_msg) {
static bool killed = false;
if (IsRunning()) {
ECHO_S(ER);
if (e >= 0) ECHO_EV((int)e);
PS_PGM(serial_msg);
ECHO_E;
ECHO_M(MSG_STOPPED_HEATER);
if (e >= 0) ECHO_EV((int)e); else ECHO_EM(MSG_HEATER_BED);
#ifdef ULTRA_LCD
lcd_setalertstatuspgm(lcd_msg);
#endif
}
#ifndef BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
Stop();
if (!killed) {
Running = false;
killed = true;
kill(lcd_msg);
}
else
disable_all_heaters(); // paranoia
#endif
}
void max_temp_error(uint8_t e) {
disable_all_heaters();
_temp_error(e, PSTR(MSG_MAXTEMP_EXTRUDER_OFF), PSTR(MSG_ERR_MAXTEMP));
_temp_error(e, PSTR(MSG_T_MAXTEMP), PSTR(MSG_ERR_MAXTEMP));
}
void min_temp_error(uint8_t e) {
disable_all_heaters();
_temp_error(e, PSTR(MSG_MINTEMP_EXTRUDER_OFF), PSTR(MSG_ERR_MINTEMP));
}
void bed_max_temp_error(void) {
#if HAS_HEATER_BED
WRITE_HEATER_BED(0);
#endif
_temp_error(-1, PSTR(MSG_MAXTEMP_BED_OFF), PSTR(MSG_ERR_MAXTEMP_BED));
_temp_error(e, PSTR(MSG_T_MINTEMP), PSTR(MSG_ERR_MINTEMP));
}
float get_pid_output(int e) {
float pid_output;
#ifdef PIDTEMP
#ifndef PID_OPENLOOP
#ifdef PID_OPENLOOP
pid_output = constrain(target_temperature[e], 0, PID_MAX);
#else
pid_error[e] = target_temperature[e] - current_temperature[e];
if (pid_error[e] > PID_FUNCTIONAL_RANGE) {
pid_output = BANG_MAX;
......@@ -509,17 +515,15 @@ float get_pid_output(int e) {
}
}
temp_dState[e] = current_temperature[e];
#else
pid_output = constrain(target_temperature[e], 0, PID_MAX);
#endif //PID_OPENLOOP
#ifdef PID_DEBUG
ECHO_SMV(DB, " PID_DEBUG ", e);
ECHO_MV(": Input ", current_temperature[e]);
ECHO_MV(" Output ", pid_output);
ECHO_MV(" pTerm ", pTerm[e]);
ECHO_MV(" iTerm ", iTerm[e]);
ECHO_EMV(" dTerm ", dTerm[e]);
ECHO_SMV(DB, MSG_PID_DEBUG, e);
ECHO_MV(MSG_PID_DEBUG_INPUT, current_temperature[e]);
ECHO_MV(MSG_PID_DEBUG_OUTPUT, pid_output);
ECHO_MV(MSG_PID_DEBUG_PTERM, pTerm[e]);
ECHO_MV(MSG_PID_DEBUG_ITERM, iTerm[e]);
ECHO_EMV(MSG_PID_DEBUG_DTERM, dTerm[e]);
#endif //PID_DEBUG
#else /* PID off */
......@@ -532,7 +536,9 @@ float get_pid_output(int e) {
#ifdef PIDTEMPBED
float get_pid_output_bed() {
float pid_output;
#ifndef PID_OPENLOOP
#ifdef PID_OPENLOOP
pid_output = constrain(target_temperature_bed, 0, MAX_BED_POWER);
#else
pid_error_bed = target_temperature_bed - current_temperature_bed;
pTerm_bed = bedKp * pid_error_bed;
temp_iState_bed += pid_error_bed;
......@@ -551,8 +557,6 @@ float get_pid_output(int e) {
if (pid_error_bed < 0) temp_iState_bed -= pid_error_bed; // conditional un-integration
pid_output = 0;
}
#else
pid_output = constrain(target_temperature_bed, 0, MAX_BED_POWER);
#endif // PID_OPENLOOP
#ifdef PID_BED_DEBUG
......@@ -588,15 +592,15 @@ void manage_heater() {
if (ct < max(HEATER_0_MINTEMP, 0.01)) min_temp_error(0);
#endif
#if defined(WATCH_TEMP_PERIOD) || !defined(PIDTEMPBED) || HAS_AUTO_FAN
#if defined(THERMAL_PROTECTION_HOTENDS) || !defined(PIDTEMPBED) || HAS_AUTO_FAN
millis_t ms = millis();
#endif
// Loop through all hotends
for (int e = 0; e < HOTENDS; e++) {
#if HAS_HEATER_THERMAL_PROTECTION
thermal_runaway_protection(&thermal_runaway_state_machine[e], &thermal_runaway_timer[e], current_temperature[e], target_temperature[e], e, THERMAL_RUNAWAY_PROTECTION_PERIOD, THERMAL_RUNAWAY_PROTECTION_HYSTERESIS);
#ifdef THERMAL_PROTECTION_HOTENDS
thermal_runaway_protection(&thermal_runaway_state_machine[e], &thermal_runaway_timer[e], current_temperature[e], target_temperature[e], e, THERMAL_PROTECTION_PERIOD, THERMAL_PROTECTION_HYSTERESIS);
#endif
float pid_output = get_pid_output(e);
......@@ -605,25 +609,25 @@ void manage_heater() {
soft_pwm[e] = current_temperature[e] > minttemp[e] && current_temperature[e] < maxttemp[e] ? (int)pid_output >> 1 : 0;
// Check if the temperature is failing to increase
#ifdef WATCH_TEMP_PERIOD
#ifdef THERMAL_PROTECTION_HOTENDS
// Is it time to check this extruder's heater?
if (watch_heater_next_ms[e] && ms > watch_heater_next_ms[e]) {
// Has it failed to increase enough?
if (degHotend(e) < watch_target_temp[e]) {
// Stop!
disable_all_heaters();
_temp_error(e, MSG_HEATING_FAILED, MSG_HEATING_FAILED_LCD);
_temp_error(e, PSTR(MSG_T_HEATING_FAILED), PSTR(MSG_HEATING_FAILED_LCD));
}
else {
// Only check once per M104/M109
watch_heater_next_ms[e] = 0;
// Start again if the target is still far off
start_watching_heater(e);
}
}
#endif // WATCH_TEMP_PERIOD
#endif // THERMAL_PROTECTION_HOTENDS
#ifdef TEMP_SENSOR_1_AS_REDUNDANT
if (fabs(current_temperature[0] - redundant_temperature) > MAX_REDUNDANT_TEMP_SENSOR_DIFF) {
disable_all_heaters();
_temp_error(0, PSTR(MSG_EXTRUDER_SWITCHED_OFF), PSTR(MSG_ERR_REDUNDANT_TEMP));
}
#endif
......@@ -659,8 +663,8 @@ void manage_heater() {
#if TEMP_SENSOR_BED != 0
#if HAS_BED_THERMAL_PROTECTION
thermal_runaway_protection(&thermal_runaway_bed_state_machine, &thermal_runaway_bed_timer, current_temperature_bed, target_temperature_bed, -1, THERMAL_RUNAWAY_PROTECTION_BED_PERIOD, THERMAL_RUNAWAY_PROTECTION_BED_HYSTERESIS);
#ifdef THERMAL_PROTECTION_BED
thermal_runaway_protection(&thermal_runaway_bed_state_machine, &thermal_runaway_bed_timer, current_temperature_bed, target_temperature_bed, -1, THERMAL_PROTECTION_BED_PERIOD, THERMAL_PROTECTION_BED_HYSTERESIS);
#endif
#ifdef PIDTEMPBED
......@@ -704,7 +708,7 @@ static float analog2temp(int raw, uint8_t e) {
#endif
{
ECHO_LVM(ER, (int)e, MSG_INVALID_EXTRUDER_NUM);
kill();
kill(PSTR(MSG_KILLED));
return 0.0;
}
......@@ -732,12 +736,7 @@ static float analog2temp(int raw, uint8_t e) {
return celsius;
}
#ifdef __SAM3X8E__
return ((raw * ((3.3 * 100) / 1024) / OVERSAMPLENR) * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET;
#else
return ((raw * ((5.0 * 100.0) / 1024.0) / OVERSAMPLENR) * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET;
#endif
}
// Derived from RepRap FiveD extruder::getTemperature()
......@@ -762,12 +761,8 @@ static float analog2tempBed(int raw) {
return celsius;
#elif defined BED_USES_AD595
#ifdef __SAM3X8E__
return ((raw * ((3.3 * 100) / 1024) / OVERSAMPLENR) * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET;
#else
return ((raw * ((5.0 * 100.0) / 1024.0) / OVERSAMPLENR) * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET;
#endif
#else //NO BED_USES_THERMISTOR
#else
return 0;
#endif
}
......@@ -802,14 +797,16 @@ static void updateTemperaturesFromRawValues() {
}
#endif
// Update printer usage
static unsigned int second_overflow = 0;
second_overflow += from_last_update;
if(second_overflow >= 1000) {
if (second_overflow >= 1000) {
printer_usage_seconds++;
second_overflow -= 1000;
}
last_update = temp_last_update;
//Reset the watchdog after we know we have a temperature measurement.
// Reset the watchdog after we know we have a temperature measurement.
watchdog_reset();
CRITICAL_SECTION_START;
......@@ -823,7 +820,7 @@ static void updateTemperaturesFromRawValues() {
// Convert raw Filament Width to millimeters
float analog2widthFil() {
return current_raw_filwidth / 16383.0 * 5.0;
//return current_raw_filwidth;
// return current_raw_filwidth;
}
// Convert raw Filament Width to a ratio
......@@ -854,7 +851,7 @@ static void updateTemperaturesFromRawValues() {
*/
void tp_init() {
#if MB(RUMBA) && ((TEMP_SENSOR_0==-1)||(TEMP_SENSOR_1==-1)||(TEMP_SENSOR_2==-1)||(TEMP_SENSOR_BED==-1))
//disable RUMBA JTAG in case the thermocouple extension is plugged on top of JTAG connector
// disable RUMBA JTAG in case the thermocouple extension is plugged on top of JTAG connector
MCUCR=BIT(JTD);
MCUCR=BIT(JTD);
#endif
......@@ -869,8 +866,8 @@ void tp_init() {
#endif //PIDTEMP
#ifdef PIDTEMPBED
temp_iState_min_bed = 0.0;
temp_iState_max_bed = PID_INTEGRAL_DRIVE_MAX / bedKi;
#endif //PIDTEMPBED
temp_iState_max_bed = PID_BED_INTEGRAL_DRIVE_MAX / bedKi;
#endif // PIDTEMPBED
}
#if HAS_HEATER_0
......@@ -911,14 +908,8 @@ void tp_init() {
OUT_WRITE(MAX6675_SS,HIGH);
#endif //HEATER_0_USES_MAX6675
#endif // HEATER_0_USES_MAX6675
#ifdef __SAM3X8E__
// Use timer0 for temperature measurement
// Interleave temperature interrupt with millies interrupt
HAL_temp_timer_start(TEMP_TIMER_NUM);
HAL_timer_enable_interrupt (TEMP_TIMER_NUM);
#else
#ifdef DIDR2
#define ANALOG_SELECT(pin) do{ if (pin < 8) DIDR0 |= BIT(pin); else DIDR2 |= BIT(pin - 8); }while(0)
#else
......@@ -957,7 +948,6 @@ void tp_init() {
// Interleave temperature interrupt with millies interrupt
OCR0B = 128;
TIMSK0 |= BIT(OCIE0B);
#endif
// Wait for temperature measurement to settle
delay(250);
......@@ -1012,7 +1002,6 @@ void tp_init() {
#endif // HOTENDS > 1
#ifdef BED_MINTEMP
/* No bed MINTEMP error implemented?!? */ /*
while(analog2tempBed(bed_minttemp_raw) < BED_MINTEMP) {
#if HEATER_BED_RAW_LO_TEMP < HEATER_BED_RAW_HI_TEMP
bed_minttemp_raw += OVERSAMPLENR;
......@@ -1020,7 +1009,6 @@ void tp_init() {
bed_minttemp_raw -= OVERSAMPLENR;
#endif
}
*/
#endif //BED_MINTEMP
#ifdef BED_MAXTEMP
while(analog2tempBed(bed_maxttemp_raw) > BED_MAXTEMP) {
......@@ -1030,32 +1018,29 @@ void tp_init() {
bed_maxttemp_raw += OVERSAMPLENR;
#endif
}
#endif //BED_MAXTEMP
#endif // BED_MAXTEMP
}
#ifdef WATCH_TEMP_PERIOD
#ifdef THERMAL_PROTECTION_HOTENDS
/**
* Start Heating Sanity Check for hotends that are below
* their target temperature by a configurable margin.
* This is called when the temperature is set. (M104, M109)
*/
void start_watching_heater(int e) {
millis_t ms = millis() + WATCH_TEMP_PERIOD;
if (degHotend(e) < degTargetHotend(e) - (WATCH_TEMP_INCREASE * 2)) {
if (degHotend(e) < degTargetHotend(e) - (WATCH_TEMP_INCREASE + TEMP_HYSTERESIS + 1)) {
watch_target_temp[e] = degHotend(e) + WATCH_TEMP_INCREASE;
watch_heater_next_ms[e] = ms;
watch_heater_next_ms[e] = millis() + WATCH_TEMP_PERIOD * 1000;
}
else
watch_heater_next_ms[e] = 0;
}
#endif
#if HAS_HEATER_THERMAL_PROTECTION || HAS_BED_THERMAL_PROTECTION
#if defined(THERMAL_PROTECTION_HOTENDS) || defined(THERMAL_PROTECTION_BED)
void thermal_runaway_protection(TRState *state, millis_t *timer, float temperature, float target_temperature, int heater_id, int period_seconds, int hysteresis_degc) {
static float tr_target_temperature[EXTRUDERS+1] = { 0.0 };
/*
ECHO_SM(DB, "Thermal Thermal Runaway Running. Heater ID: ");
if (heater_id < 0) ECHO_M("bed"); else ECHO_V(heater_id);
......@@ -1065,7 +1050,7 @@ void tp_init() {
ECHO_EMV(" ; Target Temp:", target_temperature);
*/
int heater_index = heater_id >= 0 ? heater_id : EXTRUDERS;
int heater_index = heater_id >= 0 ? heater_id : HOTENDS;
// If the target temperature changes, restart
if (tr_target_temperature[heater_index] != target_temperature)
......@@ -1097,19 +1082,11 @@ void tp_init() {
*state = TRRunaway;
break;
case TRRunaway:
ECHO_SM(ER, MSG_THERMAL_RUNAWAY_STOP);
if (heater_id < 0) ECHO_EM(MSG_THERMAL_RUNAWAY_BED); else ECHO_EV(heater_id);
LCD_ALERTMESSAGEPGM(MSG_THERMAL_RUNAWAY);
disable_all_heaters();
disable_all_steppers();
for (;;) {
manage_heater();
lcd_update();
}
_temp_error(heater_id, PSTR(MSG_T_THERMAL_RUNAWAY), PSTR(MSG_THERMAL_RUNAWAY));
}
}
#endif // HAS_HEATER_THERMAL_PROTECTION || HAS_BED_THERMAL_PROTECTION
#endif // THERMAL_PROTECTION_HOTENDS || THERMAL_PROTECTION_BED
void disable_all_heaters() {
for (int i = 0; i < HOTENDS; i++) setTargetHotend(0, i);
......@@ -1202,7 +1179,7 @@ void disable_all_heaters() {
return max6675_temp;
}
#endif //HEATER_0_USES_MAX6675
#endif // HEATER_0_USES_MAX6675
/**
* Stages in the ISR loop
......@@ -1434,7 +1411,7 @@ ISR(TIMER0_COMPB_vect) {
WRITE_FAN(soft_pwm_fan > 0 ? 1 : 0);
}
if (soft_pwm_fan < pwm_count) WRITE_FAN(0);
#endif //FAN_SOFT_PWM
#endif // FAN_SOFT_PWM
pwm_count += BIT(SOFT_PWM_SCALE);
pwm_count &= 0x7f;
......@@ -1647,10 +1624,8 @@ ISR(TIMER0_COMPB_vect) {
#else
#define GEBED >=
#endif
if (current_temperature_bed_raw GEBED bed_maxttemp_raw) {
target_temperature_bed = 0;
bed_max_temp_error();
}
if (current_temperature_bed_raw GEBED bed_maxttemp_raw) _temp_error(-1, PSTR(MSG_T_MAXTEMP), PSTR(MSG_ERR_MAXTEMP_BED));
if (bed_minttemp_raw GEBED current_temperature_bed_raw) _temp_error(-1, PSTR(MSG_T_MINTEMP), PSTR(MSG_ERR_MINTEMP_BED));
#endif
} // temp_count >= OVERSAMPLENR
......
MarlinKimbra/temperature.h
View file @ c260d3f4
......@@ -66,12 +66,13 @@ extern float current_temperature_bed;
#ifdef PIDTEMP
extern float Kp[HOTENDS], Ki[HOTENDS], Kd[HOTENDS];
#define PID_PARAM(param,e) param[e] // use macro to point to array value
#define PID_PARAM(param, e) param[e] // use macro to point to array value
float scalePID_i(float i);
float scalePID_d(float d);
float unscalePID_i(float i);
float unscalePID_d(float d);
#endif
#ifdef PIDTEMPBED
extern float bedKp,bedKi,bedKd;
#endif
......@@ -98,19 +99,24 @@ FORCE_INLINE float degBed() { return current_temperature_bed; }
#endif
FORCE_INLINE float degTargetHotend(uint8_t hotend) { return target_temperature[HOTEND_ARG]; }
FORCE_INLINE float degTargetBed() { return target_temperature_bed; }
FORCE_INLINE void setTargetHotend(const float &celsius, uint8_t hotend) { target_temperature[HOTEND_ARG] = celsius; }
#ifdef THERMAL_PROTECTION_HOTENDS
void start_watching_heater(int e=0);
#endif
FORCE_INLINE void setTargetHotend(const float &celsius, uint8_t hotend) {
target_temperature[HOTEND_ARG] = celsius;
#ifdef THERMAL_PROTECTION_HOTENDS
start_watching_heater(HOTEND_ARG);
#endif
}
FORCE_INLINE void setTargetBed(const float &celsius) { target_temperature_bed = celsius; }
FORCE_INLINE bool isHeatingHotend(uint8_t hotend) { return target_temperature[HOTEND_ARG] > current_temperature[HOTEND_ARG]; }
FORCE_INLINE bool isHeatingBed() { return target_temperature_bed > current_temperature_bed; }
FORCE_INLINE bool isCoolingHotend(uint8_t hotend) { return target_temperature[HOTEND_ARG] < current_temperature[HOTEND_ARG]; }
FORCE_INLINE bool isCoolingBed() { return target_temperature_bed < current_temperature_bed; }
#define HOTEND_ROUTINES(NR) \
......@@ -138,7 +144,6 @@ HOTEND_ROUTINES(0);
int getHeaterPower(int heater);
void disable_all_heaters();
void setWatch();
void updatePID();
void PID_autotune(float temp, int extruder, int ncycles);
......@@ -146,10 +151,6 @@ void PID_autotune(float temp, int extruder, int ncycles);
void setExtruderAutoFanState(int pin, bool state);
void checkExtruderAutoFans();
#ifdef WATCH_TEMP_PERIOD
void start_watching_heater(int e=0);
#endif
FORCE_INLINE void autotempShutdown() {
#ifdef AUTOTEMP
if (autotemp_enabled) {
......
MarlinKimbra/ultralcd.cpp
View file @ c260d3f4
......@@ -7,17 +7,16 @@
#include "stepper.h"
#include "configuration_store.h"
int8_t encoderDiff; /* encoderDiff is updated from interrupt context and added to encoderPosition every LCD update */
int8_t encoderDiff; // updated from interrupt context and added to encoderPosition every LCD update
bool encoderRateMultiplierEnabled;
int32_t lastEncoderMovementMillis;
int pageShowInfo = 0;
boolean ChangeScreen = false;
void set_pageShowInfo(int value){ pageShowInfo = value; }
void set_ChangeScreen(boolean state) { ChangeScreen = state; }
#if !defined(DELTA) && !defined(Z_SAFE_HOMING) && Z_HOME_DIR < 0
int pageShowInfo = 0;
void set_pageShowInfo(int value){ pageShowInfo = value; }
#endif
/* Configuration settings */
int plaPreheatHotendTemp;
int plaPreheatHPBTemp;
int plaPreheatFanSpeed;
......@@ -38,9 +37,7 @@ int gumPreheatFanSpeed;
millis_t print_millis = 0;
#endif
/* !Configuration settings */
//Function pointer to menu functions.
// Function pointer to menu functions.
typedef void (*menuFunc_t)();
uint8_t lcd_status_message_level;
......@@ -48,7 +45,7 @@ char lcd_status_message[3*LCD_WIDTH+1] = WELCOME_MSG; // worst case is kana with
#ifdef DOGLCD
#include "dogm_lcd_implementation.h"
#define LCD_Printpos(x, y) u8g.setPrintPos(x, y)
#define LCD_Printpos(x, y) u8g.setPrintPos(x + 5, (y + 1) * (DOG_CHAR_HEIGHT + 2))
#else
#include "ultralcd_implementation_hitachi_HD44780.h"
#define LCD_Printpos(x, y) lcd.setCursor(x, y)
......@@ -84,6 +81,9 @@ static void lcd_status_screen();
#ifdef DELTA
static void lcd_delta_calibrate_menu();
#elif !defined(DELTA) && !defined(Z_SAFE_HOMING) && Z_HOME_DIR < 0
static void lcd_level_bed();
static void config_lcd_level_bed();
#endif // DELTA
/* Different types of actions that can be used in menu items. */
......@@ -239,11 +239,11 @@ static void lcd_status_screen();
} } while(0)
/** Used variables to keep track of the menu */
#ifndef REPRAPWORLD_KEYPAD
volatile uint8_t buttons; // Bits of the pressed buttons.
#else
volatile uint8_t buttons_reprapworld_keypad; // The reprapworld_keypad shift register values
volatile uint8_t buttons; //the last checked buttons in a bit array.
#ifdef REPRAPWORLD_KEYPAD
volatile uint8_t buttons_reprapworld_keypad; // to store the keypad shift register values
#endif
#ifdef LCD_HAS_SLOW_BUTTONS
volatile uint8_t slow_buttons; // Bits of the pressed buttons.
#endif
......@@ -279,7 +279,7 @@ float raw_Ki, raw_Kd;
/**
* General function to go directly to a menu
*/
static void lcd_goto_menu(menuFunc_t menu, const bool feedback=false, const uint32_t encoder=0) {
static void lcd_goto_menu(menuFunc_t menu, const bool feedback = false, const uint32_t encoder = 0) {
if (currentMenu != menu) {
currentMenu = menu;
#ifdef NEWPANEL
......@@ -375,7 +375,7 @@ static void lcd_status_screen() {
currentMenu == lcd_status_screen
#endif
);
#ifdef FILAMENT_LCD_DISPLAY
#if HAS_LCD_FILAMENT_SENSOR || HAS_LCD_POWER_SENSOR
previous_lcd_status_ms = millis(); // get status message to show up for a while
#endif
}
......@@ -412,18 +412,20 @@ static void lcd_status_screen() {
static void lcd_return_to_status() { lcd_goto_menu(lcd_status_screen); }
static void lcd_sdcard_pause() { card.pauseSDPrint(); }
#ifdef SDSUPPORT
static void lcd_sdcard_pause() { card.pauseSDPrint(); }
static void lcd_sdcard_resume() { card.startFileprint(); }
static void lcd_sdcard_resume() { card.startFileprint(); }
static void lcd_sdcard_stop() {
quickStop();
card.sdprinting = false;
card.closeFile();
autotempShutdown();
cancel_heatup = true;
lcd_setstatus(MSG_PRINT_ABORTED, true);
}
static void lcd_sdcard_stop() {
quickStop();
card.sdprinting = false;
card.closeFile();
autotempShutdown();
cancel_heatup = true;
lcd_setstatus(MSG_PRINT_ABORTED, true);
}
#endif
/**
*
......@@ -583,12 +585,11 @@ static void lcd_tune_menu() {
void _lcd_preheat(int endnum, const float temph, const float tempb, const int fan) {
if (temph > 0) setTargetHotend(temph, endnum);
setTargetBed(tempb);
#if TEMP_SENSOR_BED != 0
setTargetBed(tempb);
#endif
fanSpeed = fan;
lcd_return_to_status();
#ifdef WATCH_TEMP_PERIOD
if (endnum >= 0) start_watching_heater(endnum);
#endif
}
void lcd_preheat_pla0() { _lcd_preheat(0, plaPreheatHotendTemp, plaPreheatHPBTemp, plaPreheatFanSpeed); }
void lcd_preheat_abs0() { _lcd_preheat(0, absPreheatHotendTemp, absPreheatHPBTemp, absPreheatFanSpeed); }
......@@ -678,7 +679,7 @@ void lcd_preheat_gum0() { _lcd_preheat(0, gumPreheatHotendTemp, gumPreheatHPBTem
}
static void lcd_preheat_gum_menu() {
START_MENU();
START_MENU(lcd_prepare_menu);
MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu);
MENU_ITEM(function, MSG_PREHEAT_GUM " 1", lcd_preheat_gum0);
#if TEMP_SENSOR_1 != 0 //2 extruder preheat
......@@ -700,93 +701,11 @@ void lcd_preheat_gum0() { _lcd_preheat(0, gumPreheatHotendTemp, gumPreheatHPBTem
#endif //more than one extruder present
void lcd_cooldown() {
setTargetHotend0(0);
setTargetHotend1(0);
setTargetHotend2(0);
setTargetHotend3(0);
setTargetBed(0);
disable_all_heaters();
fanSpeed = 0;
lcd_return_to_status();
}
void config_lcd_level_bed() {
setTargetHotend(0,0);
ECHO_EM("Leveling...");
currentMenu = lcd_level_bed;
enqueuecommands_P(PSTR("G28 M"));
pageShowInfo = 0;
}
void lcd_level_bed() {
if(ChangeScreen) {
lcd_implementation_clear;
switch(pageShowInfo) {
case 0:
{
LCD_Printpos(0, 1);
lcd_printPGM(PSTR(MSG_LP_INTRO));
currentMenu = lcd_level_bed;
ChangeScreen=false;
}
break;
case 1:
{
LCD_Printpos(0, 1);
lcd_printPGM(PSTR(MSG_LP_1));
currentMenu = lcd_level_bed;
ChangeScreen=false;
}
break;
case 2:
{
LCD_Printpos(0, 1);
lcd_printPGM(PSTR(MSG_LP_2));
currentMenu = lcd_level_bed;
ChangeScreen=false;
}
break;
case 3:
{
LCD_Printpos(0, 1);
lcd_printPGM(PSTR(MSG_LP_3));
currentMenu = lcd_level_bed;
ChangeScreen=false;
}
break;
case 4:
{
LCD_Printpos(0, 1);
lcd_printPGM(PSTR(MSG_LP_4));
currentMenu = lcd_level_bed;
ChangeScreen=false;
}
break;
case 5:
{
LCD_Printpos(0, 1);
lcd_printPGM(PSTR(MSG_LP_5));
currentMenu = lcd_level_bed;
ChangeScreen=false;
}
break;
case 6:
{
LCD_Printpos(2, 2);
lcd_printPGM(PSTR(MSG_LP_6));
ChangeScreen=false;
delay(1200);
encoderPosition = 0;
lcd_implementation_clear();
currentMenu = lcd_status_screen;
lcd_status_screen();
pageShowInfo=0;
}
break;
}
}
}
/**
*
* "Prepare" submenu
......@@ -805,8 +724,15 @@ static void lcd_prepare_menu() {
// Auto Home
//
MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28"));
#ifndef DELTA
MENU_ITEM(function, MSG_BED_SETTING, config_lcd_level_bed);
//
// Level Bed
//
#ifdef ENABLE_AUTO_BED_LEVELING
if (axis_known_position[X_AXIS] && axis_known_position[Y_AXIS])
MENU_ITEM(gcode, MSG_LEVEL_BED, PSTR("G29"));
#elif !defined(DELTA) && !defined(Z_SAFE_HOMING) && Z_HOME_DIR < 0
MENU_ITEM(submenu, MSG_MBL_SETTING, config_lcd_level_bed);
#endif
//
......@@ -826,16 +752,6 @@ static void lcd_prepare_menu() {
}
#endif
//
// Level Bed
//
#ifdef ENABLE_AUTO_BED_LEVELING
if (axis_known_position[X_AXIS] && axis_known_position[Y_AXIS])
MENU_ITEM(gcode, MSG_LEVEL_BED, PSTR("G29"));
#elif !defined(DELTA)
MENU_ITEM(function, MSG_BED_SETTING, config_lcd_level_bed);
#endif
//
// Move Axis
//
......@@ -871,7 +787,7 @@ static void lcd_prepare_menu() {
//
// Easy Load
//
#if defined(EASY_LOAD)
#ifdef EASY_LOAD
MENU_ITEM(function, MSG_E_BOWDEN_LENGTH, lcd_easy_load);
MENU_ITEM(function, MSG_R_BOWDEN_LENGTH, lcd_easy_unload);
MENU_ITEM(function, MSG_PURGE_XMM, lcd_purge);
......@@ -1073,10 +989,17 @@ static void lcd_control_menu() {
* "Control" > "Temperature" submenu
*
*/
static void lcd_control_temperature_menu() {
START_MENU(lcd_control_menu);
//
// ^ Control
//
MENU_ITEM(back, MSG_CONTROL, lcd_control_menu);
//
// Nozzle, Nozzle 2, Nozzle 3, Nozzle 4
//
#if TEMP_SENSOR_0 != 0
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP + LCD_MAX_TEMP_OFFSET);
#endif
......@@ -1095,19 +1018,35 @@ static void lcd_control_temperature_menu() {
#endif //HOTENDS > 3
#endif //HOTENDS > 2
#endif //HOTENDS > 1
//
// Bed
//
#if TEMP_SENSOR_BED != 0
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP + LCD_MAX_TEMP_OFFSET);
#endif
//
// Fan Speed
//
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255);
#ifdef IDLE_OOZING_PREVENT
MENU_ITEM_EDIT(bool, MSG_IDLEOOZING, &idleoozing_enabled);
#endif
//
// Autotemp, Min, Max, Fact
//
#if defined(AUTOTEMP) && (TEMP_SENSOR_0 != 0)
MENU_ITEM_EDIT(bool, MSG_AUTOTEMP, &autotemp_enabled);
MENU_ITEM_EDIT(float3, MSG_MIN, &autotemp_min, 0, HEATER_0_MAXTEMP + LCD_MAX_TEMP_OFFSET);
MENU_ITEM_EDIT(float3, MSG_MAX, &autotemp_max, 0, HEATER_0_MAXTEMP + LCD_MAX_TEMP_OFFSET);
MENU_ITEM_EDIT(float32, MSG_FACTOR, &autotemp_factor, 0.0, 1.0);
#endif
//
// PID-P, PID-I, PID-D
//
#ifdef PIDTEMP
// set up temp variables - undo the default scaling
raw_Ki = unscalePID_i(PID_PARAM(Ki,0));
......@@ -1144,8 +1083,20 @@ static void lcd_control_temperature_menu() {
#endif //HOTENDS > 2
#endif //HOTENDS > 1
#endif //PIDTEMP
//
// Preheat PLA conf
//
MENU_ITEM(submenu, MSG_PREHEAT_PLA_SETTINGS, lcd_control_temperature_preheat_pla_settings_menu);
//
// Preheat ABS conf
//
MENU_ITEM(submenu, MSG_PREHEAT_ABS_SETTINGS, lcd_control_temperature_preheat_abs_settings_menu);
//
// Preheat GUM conf
//
MENU_ITEM(submenu, MSG_PREHEAT_GUM_SETTINGS, lcd_control_temperature_preheat_gum_settings_menu);
END_MENU();
}
......@@ -1155,7 +1106,6 @@ static void lcd_control_temperature_menu() {
* "Temperature" > "Preheat PLA conf" submenu
*
*/
static void lcd_control_temperature_preheat_pla_settings_menu() {
START_MENU(lcd_control_temperature_menu);
MENU_ITEM(back, MSG_TEMPERATURE, lcd_control_temperature_menu);
......@@ -1177,7 +1127,6 @@ static void lcd_control_temperature_preheat_pla_settings_menu() {
* "Temperature" > "Preheat ABS conf" submenu
*
*/
static void lcd_control_temperature_preheat_abs_settings_menu() {
START_MENU(lcd_control_temperature_menu);
MENU_ITEM(back, MSG_TEMPERATURE, lcd_control_temperature_menu);
......@@ -1220,7 +1169,6 @@ static void lcd_control_temperature_preheat_gum_settings_menu() {
* "Control" > "Motion" submenu
*
*/
static void lcd_control_motion_menu() {
START_MENU(lcd_control_menu);
MENU_ITEM(back, MSG_CONTROL, lcd_control_menu);
......@@ -1271,7 +1219,6 @@ static void lcd_control_motion_menu() {
* "Control" > "Filament" submenu
*
*/
static void lcd_control_volumetric_menu() {
START_MENU(lcd_control_menu);
MENU_ITEM(back, MSG_CONTROL, lcd_control_menu);
......@@ -1299,17 +1246,27 @@ static void lcd_control_volumetric_menu() {
* "Control" > "Contrast" submenu
*
*/
#ifdef HAS_LCD_CONTRAST
static void lcd_set_contrast() {
if (encoderPosition != 0) {
lcd_contrast -= encoderPosition;
lcd_contrast &= 0x3F;
#ifdef U8GLIB_LM6059_AF
lcd_contrast += encoderPosition;
lcd_contrast &= 0xFF;
#else
lcd_contrast -= encoderPosition;
lcd_contrast &= 0x3F;
#endif
encoderPosition = 0;
lcdDrawUpdate = 1;
u8g.setContrast(lcd_contrast);
}
if (lcdDrawUpdate) lcd_implementation_drawedit(PSTR(MSG_CONTRAST), itostr2(lcd_contrast));
if (lcdDrawUpdate) {
#ifdef U8GLIB_LM6059_AF
lcd_implementation_drawedit(PSTR(MSG_CONTRAST), itostr3(lcd_contrast));
#else
lcd_implementation_drawedit(PSTR(MSG_CONTRAST), itostr2(lcd_contrast));
#endif
}
if (LCD_CLICKED) lcd_goto_menu(lcd_control_menu);
}
#endif // HAS_LCD_CONTRAST
......@@ -1319,7 +1276,6 @@ static void lcd_control_volumetric_menu() {
* "Control" > "Retract" submenu
*
*/
#ifdef FWRETRACT
static void lcd_control_retract_menu() {
START_MENU(lcd_control_menu);
......@@ -1340,58 +1296,59 @@ static void lcd_control_volumetric_menu() {
}
#endif // FWRETRACT
#if SDCARDDETECT == -1
static void lcd_sd_refresh() {
card.initsd();
currentMenuViewOffset = 0;
}
#endif
static void lcd_sd_updir() {
card.updir();
currentMenuViewOffset = 0;
}
/**
*
* "Print from SD" submenu
*
*/
#ifdef SDSUPPORT
#if SDCARDDETECT == -1
static void lcd_sd_refresh() {
card.initsd();
currentMenuViewOffset = 0;
}
#endif
void lcd_sdcard_menu() {
if (lcdDrawUpdate == 0 && LCD_CLICKED == 0) return; // nothing to do (so don't thrash the SD card)
uint16_t fileCnt = card.getnrfilenames();
START_MENU(lcd_main_menu);
MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
card.getWorkDirName();
if (card.filename[0] == '/') {
#if SDCARDDETECT == -1
MENU_ITEM(function, LCD_STR_REFRESH MSG_REFRESH, lcd_sd_refresh);
#endif
}
else {
MENU_ITEM(function, LCD_STR_FOLDER "..", lcd_sd_updir);
static void lcd_sd_updir() {
card.updir();
currentMenuViewOffset = 0;
}
for (uint16_t i = 0; i < fileCnt; i++) {
if (_menuItemNr == _lineNr) {
card.getfilename(
#ifdef SDCARD_RATHERRECENTFIRST
fileCnt-1 -
#endif
i
);
if (card.filenameIsDir)
MENU_ITEM(sddirectory, MSG_CARD_MENU, card.filename, card.longFilename);
else
MENU_ITEM(sdfile, MSG_CARD_MENU, card.filename, card.longFilename);
/**
*
* "Print from SD" submenu
*
*/
void lcd_sdcard_menu() {
if (lcdDrawUpdate == 0 && LCD_CLICKED == 0) return; // nothing to do (so don't thrash the SD card)
uint16_t fileCnt = card.getnrfilenames();
START_MENU(lcd_main_menu);
MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
card.getWorkDirName();
if (card.filename[0] == '/') {
#if SDCARDDETECT == -1
MENU_ITEM(function, LCD_STR_REFRESH MSG_REFRESH, lcd_sd_refresh);
#endif
}
else {
MENU_ITEM_DUMMY();
MENU_ITEM(function, LCD_STR_FOLDER "..", lcd_sd_updir);
}
for (uint16_t i = 0; i < fileCnt; i++) {
if (_menuItemNr == _lineNr) {
card.getfilename(
#ifdef SDCARD_RATHERRECENTFIRST
fileCnt-1 -
#endif
i
);
if (card.filenameIsDir)
MENU_ITEM(sddirectory, MSG_CARD_MENU, card.filename, card.longFilename);
else
MENU_ITEM(sdfile, MSG_CARD_MENU, card.filename, card.longFilename);
}
else {
MENU_ITEM_DUMMY();
}
}
END_MENU();
}
END_MENU();
}
#endif // SDSUPPORT
/**
*
......@@ -1483,7 +1440,7 @@ menu_edit_type(unsigned long, long5, ftostr5, 0.01)
static void reprapworld_keypad_move_home() {
enqueuecommands_P((PSTR("G28"))); // move all axis home
}
#endif //REPRAPWORLD_KEYPAD
#endif // REPRAPWORLD_KEYPAD
/**
......@@ -1503,7 +1460,7 @@ void lcd_quick_feedback() {
#define LCD_FEEDBACK_FREQUENCY_DURATION_MS (1000/6)
#endif
lcd_buzz(LCD_FEEDBACK_FREQUENCY_DURATION_MS, LCD_FEEDBACK_FREQUENCY_HZ);
#elif defined(BEEPER) && BEEPER > -1
#elif defined(BEEPER) && BEEPER >= 0
#ifndef LCD_FEEDBACK_FREQUENCY_HZ
#define LCD_FEEDBACK_FREQUENCY_HZ 5000
#endif
......@@ -1528,19 +1485,23 @@ static void menu_action_back(menuFunc_t func) { lcd_goto_menu(func); }
static void menu_action_submenu(menuFunc_t func) { lcd_goto_menu(func); }
static void menu_action_gcode(const char* pgcode) { enqueuecommands_P(pgcode); }
static void menu_action_function(menuFunc_t func) { (*func)(); }
static void menu_action_sdfile(const char* filename, char* longFilename) {
char cmd[30];
char* c;
sprintf_P(cmd, PSTR("M23 %s"), filename);
for(c = &cmd[4]; *c; c++) *c = tolower(*c);
enqueuecommand(cmd);
enqueuecommands_P(PSTR("M24"));
lcd_return_to_status();
}
static void menu_action_sddirectory(const char* filename, char* longFilename) {
card.chdir(filename);
encoderPosition = 0;
}
#ifdef SDSUPPORT
static void menu_action_sdfile(const char* filename, char* longFilename) {
char cmd[30];
char* c;
sprintf_P(cmd, PSTR("M23 %s"), filename);
for(c = &cmd[4]; *c; c++) *c = tolower(*c);
enqueuecommand(cmd);
enqueuecommands_P(PSTR("M24"));
lcd_return_to_status();
}
static void menu_action_sddirectory(const char* filename, char* longFilename) {
card.chdir(filename);
encoderPosition = 0;
}
#endif // SDSUPPORT
static void menu_action_setting_edit_bool(const char* pstr, bool* ptr) { *ptr = !(*ptr); }
static void menu_action_setting_edit_callback_bool(const char* pstr, bool* ptr, menuFunc_t callback) {
menu_action_setting_edit_bool(pstr, ptr);
......@@ -1749,11 +1710,19 @@ void lcd_update() {
#endif
#ifdef ULTIPANEL
if (currentMenu != lcd_status_screen && millis() > return_to_status_ms) {
// Return to Status Screen after a timeout
if (currentMenu != lcd_status_screen &&
#if !defined(DELTA) && !defined(Z_SAFE_HOMING) && Z_HOME_DIR < 0
currentMenu != lcd_level_bed &&
#endif
millis() > return_to_status_ms
) {
lcd_return_to_status();
lcdDrawUpdate = 2;
}
#endif //ULTIPANEL
#endif // ULTIPANEL
if (lcdDrawUpdate == 2) lcd_implementation_clear();
if (lcdDrawUpdate) lcdDrawUpdate--;
......@@ -1775,7 +1744,7 @@ void lcd_finishstatus(bool persist=false) {
#endif
lcdDrawUpdate = 2;
#ifdef FILAMENT_LCD_DISPLAY
#if HAS_LCD_FILAMENT_SENSOR || HAS_LCD_POWER_SENSOR
previous_lcd_status_ms = millis(); //get status message to show up for a while
#endif
}
......@@ -1931,13 +1900,12 @@ void lcd_reset_alert_level() { lcd_status_message_level = 0; }
void lcd_buzz(long duration, uint16_t freq) {
if (freq > 0) {
#if BEEPER > 0
#ifdef LCD_USE_I2C_BUZZER
lcd.buzz(duration, freq);
#elif defined(BEEPER) && BEEPER >= 0
SET_OUTPUT(BEEPER);
tone(BEEPER, freq);
tone(BEEPER, freq, duration);
delay(duration);
noTone(BEEPER);
#elif defined(LCD_USE_I2C_BUZZER)
lcd.buzz(duration, freq);
#else
delay(duration);
#endif
......@@ -2226,5 +2194,66 @@ char *ftostr52(const float &x) {
return conv;
}
#if !defined(DELTA) && !defined(Z_SAFE_HOMING) && Z_HOME_DIR < 0
static void lcd_level_bed() {
switch(pageShowInfo) {
case 0:
{
LCD_Printpos(0, 0); lcd_printPGM(PSTR(MSG_MBL_INTRO));
LCD_Printpos(0, 1); lcd_printPGM(PSTR(MSG_MBL_BUTTON));
}
break;
case 1:
{
LCD_Printpos(0, 0); lcd_printPGM(PSTR(MSG_MBL_1));
LCD_Printpos(0, 1); lcd_printPGM(PSTR(MSG_MBL_BUTTON));
}
break;
case 2:
{
LCD_Printpos(0, 0); lcd_printPGM(PSTR(MSG_MBL_2));
LCD_Printpos(0, 1); lcd_printPGM(PSTR(MSG_MBL_BUTTON));
}
break;
case 3:
{
LCD_Printpos(0, 0); lcd_printPGM(PSTR(MSG_MBL_3));
LCD_Printpos(0, 1); lcd_printPGM(PSTR(MSG_MBL_BUTTON));
}
break;
case 4:
{
LCD_Printpos(0, 0); lcd_printPGM(PSTR(MSG_MBL_4));
LCD_Printpos(0, 1); lcd_printPGM(PSTR(MSG_MBL_BUTTON));
}
break;
case 5:
{
LCD_Printpos(0, 0); lcd_printPGM(PSTR(MSG_MBL_5));
LCD_Printpos(0, 1); lcd_printPGM(PSTR(MSG_MBL_BUTTON));
}
break;
case 6:
{
LCD_Printpos(0, 0); lcd_printPGM(PSTR(MSG_MBL_6));
LCD_Printpos(0, 1); lcd_printPGM(PSTR(" "));
delay(5000);
enqueuecommands_P(PSTR("G28"));
lcd_return_to_status();
}
break;
}
}
static void config_lcd_level_bed() {
ECHO_EM(MSG_MBL_SETTING);
enqueuecommands_P(PSTR("G28 M"));
pageShowInfo = 0;
lcd_goto_menu(lcd_level_bed);
}
#endif
#endif //ULTRA_LCD
MarlinKimbra/ultralcd.h
View file @ c260d3f4
......@@ -24,10 +24,9 @@
void lcd_setcontrast(uint8_t value);
#endif
void set_pageShowInfo(int value);
void set_ChangeScreen(boolean state);
void config_lcd_level_bed(void);
void lcd_level_bed(void);
#if !defined(DELTA) && !defined(Z_SAFE_HOMING) && Z_HOME_DIR < 0
void set_pageShowInfo(int value);
#endif
#define LCD_MESSAGEPGM(x) lcd_setstatuspgm(PSTR(x))
#define LCD_ALERTMESSAGEPGM(x) lcd_setalertstatuspgm(PSTR(x))
......@@ -57,7 +56,7 @@
extern bool cancel_heatup;
#if (HAS_FILAMENT_SENSOR && defined(FILAMENT_LCD_DISPLAY)) || (HAS_POWER_CONSUMPTION_SENSOR && defined(POWER_CONSUMPTION_LCD_DISPLAY))
#if HAS_LCD_FILAMENT_SENSOR || HAS_LCD_POWER_SENSOR
extern millis_t previous_lcd_status_ms;
#endif
......@@ -118,7 +117,7 @@
FORCE_INLINE void lcd_setstatuspgm(const char* message, const uint8_t level=0) {}
FORCE_INLINE void lcd_buttons_update() {}
FORCE_INLINE void lcd_reset_alert_level() {}
FORCE_INLINE void lcd_buzz(long duration,uint16_t freq) {}
FORCE_INLINE void lcd_buzz(long duration, uint16_t freq) {}
FORCE_INLINE bool lcd_detected(void) { return true; }
#define LCD_MESSAGEPGM(x) do{}while(0)
......
MarlinKimbra/ultralcd_implementation_hitachi_HD44780.h
View file @ c260d3f4
......@@ -6,17 +6,17 @@
* When selecting the Russian language, a slightly different LCD implementation is used to handle UTF8 characters.
**/
#ifndef REPRAPWORLD_KEYPAD
extern volatile uint8_t buttons; //the last checked buttons in a bit array.
#else
extern volatile uint16_t buttons; //an extended version of the last checked buttons in a bit array.
#endif
//#ifndef REPRAPWORLD_KEYPAD
// extern volatile uint8_t buttons; //the last checked buttons in a bit array.
//#else
extern volatile uint8_t buttons; //an extended version of the last checked buttons in a bit array.
//#endif
////////////////////////////////////
// Setup button and encode mappings for each panel (into 'buttons' variable
//
// This is just to map common functions (across different panels) onto the same
// macro name. The mapping is independent of whether the button is directly connected or
// This is just to map common functions (across different panels) onto the same
// macro name. The mapping is independent of whether the button is directly connected or
// via a shift/i2c register.
#ifdef ULTIPANEL
......@@ -43,7 +43,7 @@
//
#if defined(LCD_I2C_VIKI)
#define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C)
// button and encoder bit positions within 'buttons'
#define B_LE (BUTTON_LEFT<<B_I2C_BTN_OFFSET) // The remaining normalized buttons are all read via I2C
#define B_UP (BUTTON_UP<<B_I2C_BTN_OFFSET)
......@@ -51,22 +51,22 @@
#define B_DW (BUTTON_DOWN<<B_I2C_BTN_OFFSET)
#define B_RI (BUTTON_RIGHT<<B_I2C_BTN_OFFSET)
#if defined(BTN_ENC) && BTN_ENC > -1
#if defined(BTN_ENC) && BTN_ENC > -1
// the pause/stop/restart button is connected to BTN_ENC when used
#define B_ST (EN_C) // Map the pause/stop/resume button into its normalized functional name
#define B_ST (EN_C) // Map the pause/stop/resume button into its normalized functional name
#define LCD_CLICKED (buttons&(B_MI|B_RI|B_ST)) // pause/stop button also acts as click until we implement proper pause/stop.
#else
#define LCD_CLICKED (buttons&(B_MI|B_RI))
#endif
#endif
// I2C buttons take too long to read inside an interrupt context and so we read them during lcd_update
#define LCD_HAS_SLOW_BUTTONS
#elif defined(LCD_I2C_PANELOLU2)
// encoder click can be read through I2C if not directly connected
#if BTN_ENC <= 0
#if BTN_ENC <= 0
#define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C)
#define B_MI (PANELOLU2_ENCODER_C<<B_I2C_BTN_OFFSET) // requires LiquidTWI2 library v1.2.3 or later
#define LCD_CLICKED (buttons&B_MI)
......@@ -74,7 +74,7 @@
// I2C buttons take too long to read inside an interrupt context and so we read them during lcd_update
#define LCD_HAS_SLOW_BUTTONS
#else
#define LCD_CLICKED (buttons&EN_C)
#define LCD_CLICKED (buttons&EN_C)
#endif
#elif defined(REPRAPWORLD_KEYPAD)
......@@ -82,13 +82,13 @@
#define BLEN_REPRAPWORLD_KEYPAD_F3 0
#define BLEN_REPRAPWORLD_KEYPAD_F2 1
#define BLEN_REPRAPWORLD_KEYPAD_F1 2
#define BLEN_REPRAPWORLD_KEYPAD_UP 3
#define BLEN_REPRAPWORLD_KEYPAD_UP 6
#define BLEN_REPRAPWORLD_KEYPAD_RIGHT 4
#define BLEN_REPRAPWORLD_KEYPAD_MIDDLE 5
#define BLEN_REPRAPWORLD_KEYPAD_DOWN 6
#define BLEN_REPRAPWORLD_KEYPAD_DOWN 3
#define BLEN_REPRAPWORLD_KEYPAD_LEFT 7
#define REPRAPWORLD_BTN_OFFSET 3 // bit offset into buttons for shift register values
#define REPRAPWORLD_BTN_OFFSET 0 // bit offset into buttons for shift register values
#define EN_REPRAPWORLD_KEYPAD_F3 BIT((BLEN_REPRAPWORLD_KEYPAD_F3+REPRAPWORLD_BTN_OFFSET))
#define EN_REPRAPWORLD_KEYPAD_F2 BIT((BLEN_REPRAPWORLD_KEYPAD_F2+REPRAPWORLD_BTN_OFFSET))
......@@ -99,17 +99,17 @@
#define EN_REPRAPWORLD_KEYPAD_DOWN BIT((BLEN_REPRAPWORLD_KEYPAD_DOWN+REPRAPWORLD_BTN_OFFSET))
#define EN_REPRAPWORLD_KEYPAD_LEFT BIT((BLEN_REPRAPWORLD_KEYPAD_LEFT+REPRAPWORLD_BTN_OFFSET))
#define LCD_CLICKED ((buttons&EN_C) || (buttons&EN_REPRAPWORLD_KEYPAD_F1))
#define REPRAPWORLD_KEYPAD_MOVE_Y_DOWN (buttons&EN_REPRAPWORLD_KEYPAD_DOWN)
#define REPRAPWORLD_KEYPAD_MOVE_Y_UP (buttons&EN_REPRAPWORLD_KEYPAD_UP)
#define REPRAPWORLD_KEYPAD_MOVE_HOME (buttons&EN_REPRAPWORLD_KEYPAD_MIDDLE)
//#define LCD_CLICKED ((buttons&EN_C) || (buttons&EN_REPRAPWORLD_KEYPAD_F1))
//#define REPRAPWORLD_KEYPAD_MOVE_Y_DOWN (buttons&EN_REPRAPWORLD_KEYPAD_DOWN)
//#define REPRAPWORLD_KEYPAD_MOVE_Y_UP (buttons&EN_REPRAPWORLD_KEYPAD_UP)
//#define REPRAPWORLD_KEYPAD_MOVE_HOME (buttons&EN_REPRAPWORLD_KEYPAD_MIDDLE)
#elif defined(NEWPANEL)
#define LCD_CLICKED (buttons&EN_C)
#if HAS_BTN_BACK
#define LCD_BACK_CLICKED (buttons&EN_D)
#endif
#else // old style ULTIPANEL
//bits in the shift register that carry the buttons for:
// left up center down right red(stop)
......@@ -151,7 +151,7 @@
#include <LiquidCrystal_I2C.h>
#define LCD_CLASS LiquidCrystal_I2C
LCD_CLASS lcd(LCD_I2C_ADDRESS,LCD_I2C_PIN_EN,LCD_I2C_PIN_RW,LCD_I2C_PIN_RS,LCD_I2C_PIN_D4,LCD_I2C_PIN_D5,LCD_I2C_PIN_D6,LCD_I2C_PIN_D7);
#elif defined(LCD_I2C_TYPE_MCP23017)
//for the LED indicators (which maybe mapped to different things in lcd_implementation_update_indicators())
#define LED_A 0x04 //100
......@@ -164,28 +164,28 @@
#include <LiquidTWI2.h>
#define LCD_CLASS LiquidTWI2
#if defined(DETECT_DEVICE)
LCD_CLASS lcd(LCD_I2C_ADDRESS, 1);
LCD_CLASS lcd(LCD_I2C_ADDRESS, 1);
#else
LCD_CLASS lcd(LCD_I2C_ADDRESS);
LCD_CLASS lcd(LCD_I2C_ADDRESS);
#endif
#elif defined(LCD_I2C_TYPE_MCP23008)
#include <Wire.h>
#include <LiquidTWI2.h>
#define LCD_CLASS LiquidTWI2
#if defined(DETECT_DEVICE)
LCD_CLASS lcd(LCD_I2C_ADDRESS, 1);
LCD_CLASS lcd(LCD_I2C_ADDRESS, 1);
#else
LCD_CLASS lcd(LCD_I2C_ADDRESS);
LCD_CLASS lcd(LCD_I2C_ADDRESS);
#endif
#elif defined(LCD_I2C_TYPE_PCA8574)
#include <LiquidCrystal_I2C.h>
#define LCD_CLASS LiquidCrystal_I2C
LCD_CLASS lcd(LCD_I2C_ADDRESS, LCD_WIDTH, LCD_HEIGHT);
// 2 wire Non-latching LCD SR from:
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
#elif defined(SR_LCD_2W_NL)
extern "C" void __cxa_pure_virtual() { while (1); }
#include <LCD.h>
......@@ -378,164 +378,158 @@ static void lcd_implementation_init(
#endif
) {
#if defined(LCD_I2C_TYPE_PCF8575)
#if defined(LCD_I2C_TYPE_PCF8575)
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
#ifdef LCD_I2C_PIN_BL
lcd.setBacklightPin(LCD_I2C_PIN_BL,POSITIVE);
lcd.setBacklight(HIGH);
#endif
#elif defined(LCD_I2C_TYPE_MCP23017)
#ifdef LCD_I2C_PIN_BL
lcd.setBacklightPin(LCD_I2C_PIN_BL, POSITIVE);
lcd.setBacklight(HIGH);
#endif
#elif defined(LCD_I2C_TYPE_MCP23017)
lcd.setMCPType(LTI_TYPE_MCP23017);
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
lcd.setBacklight(0); //set all the LEDs off to begin with
#elif defined(LCD_I2C_TYPE_MCP23008)
#elif defined(LCD_I2C_TYPE_MCP23008)
lcd.setMCPType(LTI_TYPE_MCP23008);
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
#elif defined(LCD_I2C_TYPE_PCA8574)
lcd.init();
lcd.backlight();
#else
#if (LCD_PINS_RS != -1) && (LCD_PINS_ENABLE != -1)
#elif defined(LCD_I2C_TYPE_PCA8574)
lcd.init();
lcd.backlight();
#else
#if (LCD_PINS_RS != -1) && (LCD_PINS_ENABLE != -1)
// required for RAMPS-FD, but does no harm for other targets
SET_OUTPUT(LCD_PINS_RS);
SET_OUTPUT(LCD_PINS_ENABLE);
#endif
#endif
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
#endif
lcd_set_custom_characters(
#ifdef LCD_PROGRESS_BAR
progress_bar_set
#endif
);
#endif
lcd.clear();
}
lcd_set_custom_characters(
#ifdef LCD_PROGRESS_BAR
progress_bar_set
#endif
);
static void lcd_implementation_clear() {
lcd.clear();
}
static void lcd_implementation_clear() { lcd.clear(); }
/* Arduino < 1.0.0 is missing a function to print PROGMEM strings, so we need to implement our own */
char lcd_printPGM(const char* str) {
char c;
char n = 0;
while((c = pgm_read_byte(str++))) {
n += charset_mapper(c);
}
char c, n = 0;
while ((c = pgm_read_byte(str++))) n += charset_mapper(c);
return n;
}
char lcd_print(char* str) {
char c, n = 0;;
char c, n = 0;
unsigned char i = 0;
while((c = str[i++])) {
n += charset_mapper(c);
}
while ((c = str[i++])) n += charset_mapper(c);
return n;
}
unsigned lcd_print(char c) {
return charset_mapper(c);
}
unsigned lcd_print(char c) { return charset_mapper(c); }
/*
Possible status screens:
16x2 |0123456789012345|
|000/000 B000/000|
|Status line.....|
16x2 |000/000 B000/000|
|0123456789012345|
16x4 |0123456789012345|
|000/000 B000/000|
|SD100% Z000.0|
16x4 |000/000 B000/000|
|SD100% Z000.00 |
|F100% T--:--|
|Status line.....|
|0123456789012345|
20x2 |01234567890123456789|
|T000/000D B000/000D |
|Status line.........|
20x2 |T000/000D B000/000D |
|01234567890123456789|
20x4 |01234567890123456789|
|T000/000D B000/000D |
|X000 Y000 Z000.00|
20x4 |T000/000D B000/000D |
|X000 Y000 Z000.00 |
|F100% SD100% T--:--|
|Status line.........|
|01234567890123456789|
20x4 |01234567890123456789|
|T000/000D B000/000D |
|T000/000D Z000.0|
20x4 |T000/000D B000/000D |
|T000/000D Z000.00 |
|F100% SD100% T--:--|
|Status line.........|
|01234567890123456789|
*/
static void lcd_implementation_status_screen() {
int tHotend = int(degHotend(0) + 0.5);
int tTarget = int(degTargetHotend(0) + 0.5);
#define LCD_TEMP_ONLY(T1,T2) \
lcd.print(itostr3(T1 + 0.5)); \
lcd.print('/'); \
lcd.print(itostr3left(T2 + 0.5))
#define LCD_TEMP(T1,T2,PREFIX) \
lcd.print(PREFIX); \
LCD_TEMP_ONLY(T1,T2); \
lcd_printPGM(PSTR(LCD_STR_DEGREE " ")); \
if (T2 < 10) lcd.print(' ')
//
// Line 1
//
lcd.setCursor(0, 0);
#if LCD_WIDTH < 20
lcd.setCursor(0, 0);
lcd.print(itostr3(tHotend));
lcd.print('/');
lcd.print(itostr3left(tTarget));
//
// Hotend 0 Temperature
//
LCD_TEMP_ONLY(degHotend(0), degTargetHotend(0));
//
// Hotend 1 or Bed Temperature
//
#if HOTENDS > 1 || TEMP_SENSOR_BED != 0
// If we have an 2nd extruder or heated bed, show that in the top right corner
lcd.setCursor(8, 0);
#if HOTENDS > 1
tHotend = int(degHotend(1) + 0.5);
tTarget = int(degTargetHotend(1) + 0.5);
lcd.print(LCD_STR_THERMOMETER[0]);
LCD_TEMP_ONLY(degHotend(1), degTargetHotend(1));
#else // Heated bed
tHotend = int(degBed() + 0.5);
tTarget = int(degTargetBed() + 0.5);
lcd.print(LCD_STR_BEDTEMP[0]);
LCD_TEMP_ONLY(degBed(), degTargetBed());
#endif
lcd.print(itostr3(tHotend));
lcd.print('/');
lcd.print(itostr3left(tTarget));
#endif // HOTENDS > 1 || TEMP_SENSOR_BED != 0
#else // LCD_WIDTH > 19
#else // LCD_WIDTH >= 20
lcd.setCursor(0, 0);
lcd.print(LCD_STR_THERMOMETER[0]);
lcd.print(itostr3(tHotend));
lcd.print('/');
lcd.print(itostr3left(tTarget));
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
if (tTarget < 10) lcd.print(' ');
//
// Hotend 0 Temperature
//
LCD_TEMP(degHotend(0), degTargetHotend(0), LCD_STR_THERMOMETER[0]);
//
// Hotend 1 or Bed Temperature
//
#if HOTENDS > 1 || TEMP_SENSOR_BED != 0
// If we have an 2nd extruder or heated bed, show that in the top right corner
lcd.setCursor(10, 0);
#if HOTENDS > 1
tHotend = int(degHotend(1) + 0.5);
tTarget = int(degTargetHotend(1) + 0.5);
lcd.print(LCD_STR_THERMOMETER[0]);
#else // Heated bed
tHotend = int(degBed() + 0.5);
tTarget = int(degTargetBed() + 0.5);
lcd.print(LCD_STR_BEDTEMP[0]);
LCD_TEMP(degHotend(1), degTargetHotend(1), LCD_STR_THERMOMETER[0]);
#else
LCD_TEMP(degBed(), degTargetBed(), LCD_STR_BEDTEMP[0]);
#endif
lcd.print(itostr3(tHotend));
lcd.print('/');
lcd.print(itostr3left(tTarget));
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
if (tTarget < 10) lcd.print(' ');
#endif // HOTENDS > 1 || TEMP_SENSOR_BED != 0
#endif // LCD_WIDTH > 19
#endif // LCD_WIDTH >= 20
//
// Line 2
//
#if LCD_HEIGHT > 2
// Lines 2 for 4 line LCD
#if LCD_WIDTH < 20
#ifdef SDSUPPORT
lcd.setCursor(0, 2);
lcd_printPGM(PSTR("SD"));
......@@ -546,22 +540,19 @@ static void lcd_implementation_status_screen() {
lcd.print('%');
#endif // SDSUPPORT
#else // LCD_WIDTH > 19
#else // LCD_WIDTH >= 20
lcd.setCursor(0, 1);
#if HOTENDS > 1 && TEMP_SENSOR_BED != 0
// If we both have a 2nd extruder and a heated bed, show the heated bed temp on the 2nd line on the left, as the first line is filled with extruder temps
tHotend = int(degBed() + 0.5);
tTarget = int(degTargetBed() + 0.5);
lcd.setCursor(0, 1);
lcd.print(LCD_STR_BEDTEMP[0]);
lcd.print(itostr3(tHotend));
lcd.print('/');
lcd.print(itostr3left(tTarget));
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
if (tTarget < 10) lcd.print(' ');
// If we both have a 2nd extruder and a heated bed,
// show the heated bed temp on the left,
// since the first line is filled with extruder temps
LCD_TEMP(degBed(), degTargetBed(), LCD_STR_BEDTEMP[0]);
#else
lcd.setCursor(0,1);
#ifdef DELTA
lcd.print('X');
lcd.print(ftostr30(current_position[X_AXIS]));
......@@ -575,7 +566,7 @@ static void lcd_implementation_status_screen() {
#endif // DELTA
#endif // HOTENDS > 1 || TEMP_SENSOR_BED != 0
#endif // LCD_WIDTH > 19
#endif // LCD_WIDTH >= 20
lcd.setCursor(LCD_WIDTH - 8, 1);
lcd.print('Z');
......@@ -583,6 +574,10 @@ static void lcd_implementation_status_screen() {
#endif // LCD_HEIGHT > 2
//
// Line 3
//
#if LCD_HEIGHT > 3
lcd.setCursor(0, 2);
......@@ -630,9 +625,10 @@ static void lcd_implementation_status_screen() {
#endif // LCD_HEIGHT > 3
/**
* Display Progress Bar, Filament display, and/or Status Message on the last line
*/
//
// Last Line
// Status Message (which may be a Progress Bar or Filament display)
//
lcd.setCursor(0, LCD_HEIGHT - 1);
......@@ -797,7 +793,7 @@ static void lcd_implementation_drawmenu_sddirectory(bool sel, uint8_t row, const
static void lcd_implementation_update_indicators() {
#if defined(LCD_I2C_PANELOLU2) || defined(LCD_I2C_VIKI)
//set the LEDS - referred to as backlights by the LiquidTWI2 library
// Set the LEDS - referred to as backlights by the LiquidTWI2 library
static uint8_t ledsprev = 0;
uint8_t leds = 0;
if (target_temperature_bed > 0) leds |= LED_A;
......@@ -835,4 +831,4 @@ static void lcd_implementation_drawmenu_sddirectory(bool sel, uint8_t row, const
#endif // LCD_HAS_SLOW_BUTTONS
#endif //__ULTRALCD_IMPLEMENTATION_HITACHI_HD44780_H
#endif // ULTRALCD_IMPLEMENTATION_HITACHI_HD44780_H
MarlinKimbra/ultralcd_st7920_u8glib_rrd.h
View file @ c260d3f4
......@@ -16,8 +16,8 @@
//#define PAGE_HEIGHT 16 //256 byte framebuffer
#define PAGE_HEIGHT 32 //512 byte framebuffer
#define WIDTH 128
#define HEIGHT 64
#define LCD_PIXEL_WIDTH 128
#define LCD_PIXEL_HEIGHT 64
#include <U8glib.h>
......@@ -53,9 +53,9 @@ uint8_t u8g_dev_rrd_st7920_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, vo
{
case U8G_DEV_MSG_INIT:
{
OUT_WRITE(ST7920_CS_PIN, LOW);
OUT_WRITE(ST7920_DAT_PIN, LOW);
OUT_WRITE(ST7920_CLK_PIN, HIGH);
OUT_WRITE(ST7920_CS_PIN,LOW);
OUT_WRITE(ST7920_DAT_PIN,LOW);
OUT_WRITE(ST7920_CLK_PIN,HIGH);
ST7920_CS();
u8g_Delay(120); //initial delay for boot up
......@@ -64,12 +64,12 @@ uint8_t u8g_dev_rrd_st7920_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, vo
ST7920_WRITE_BYTE(0x01); //clear CGRAM ram
u8g_Delay(15); //delay for CGRAM clear
ST7920_WRITE_BYTE(0x3E); //extended mode + GDRAM active
for(y=0;y<HEIGHT/2;y++) //clear GDRAM
for(y = 0; y < LCD_PIXEL_HEIGHT / 2; y++) //clear GDRAM
{
ST7920_WRITE_BYTE(0x80|y); //set y
ST7920_WRITE_BYTE(0x80); //set x = 0
ST7920_SET_DAT();
for(i=0;i<2*WIDTH/8;i++) //2x width clears both segments
for(i = 0; i < 2 * LCD_PIXEL_WIDTH / 8; i++) //2x width clears both segments
ST7920_WRITE_BYTE(0);
ST7920_SET_CMD();
}
......@@ -103,7 +103,7 @@ uint8_t u8g_dev_rrd_st7920_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, vo
}
ST7920_SET_DAT();
ST7920_WRITE_BYTES(ptr,WIDTH/8); //ptr is incremented inside of macro
ST7920_WRITE_BYTES(ptr,LCD_PIXEL_WIDTH/8); //ptr is incremented inside of macro
y++;
}
ST7920_NCS();
......@@ -119,8 +119,8 @@ uint8_t u8g_dev_rrd_st7920_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, vo
#endif
}
uint8_t u8g_dev_st7920_128x64_rrd_buf[WIDTH*(PAGE_HEIGHT/8)] U8G_NOCOMMON;
u8g_pb_t u8g_dev_st7920_128x64_rrd_pb = {{PAGE_HEIGHT,HEIGHT,0,0,0},WIDTH,u8g_dev_st7920_128x64_rrd_buf};
uint8_t u8g_dev_st7920_128x64_rrd_buf[LCD_PIXEL_WIDTH*(PAGE_HEIGHT/8)] U8G_NOCOMMON;
u8g_pb_t u8g_dev_st7920_128x64_rrd_pb = {{PAGE_HEIGHT,LCD_PIXEL_HEIGHT,0,0,0},LCD_PIXEL_WIDTH,u8g_dev_st7920_128x64_rrd_buf};
u8g_dev_t u8g_dev_st7920_128x64_rrd_sw_spi = {u8g_dev_rrd_st7920_128x64_fn,&u8g_dev_st7920_128x64_rrd_pb,&u8g_com_null_fn};
class U8GLIB_ST7920_128X64_RRD : public U8GLIB
......
MarlinKimbra/watchdog.cpp
View file @ c260d3f4
......@@ -7,11 +7,11 @@
#include "ultralcd.h"
//===========================================================================
//=============================private variables ============================
//============================ private variables ============================
//===========================================================================
//===========================================================================
//=============================functinos ============================
//================================ functions ================================
//===========================================================================
......@@ -36,20 +36,16 @@ void watchdog_reset()
}
//===========================================================================
//=============================ISR ============================
//=================================== ISR ===================================
//===========================================================================
//Watchdog timer interrupt, called if main program blocks >1sec and manual reset is enabled.
// Watchdog timer interrupt, called if main program blocks >1sec and manual reset is enabled.
#ifdef WATCHDOG_RESET_MANUAL
ISR(WDT_vect)
{
//TODO: This message gets overwritten by the kill() call
LCD_ALERTMESSAGEPGM("ERR:Please Reset");//16 characters so it fits on a 16x2 display
lcd_update();
ECHO_LM(MSG_WATCHDOG_RESET);
kill(); //kill blocks
while(1); //wait for user or serial reset
ISR(WDT_vect) {
ECHO_LM(ER, MSG_WATCHDOG_RESET);
kill(PSTR("ERR:Please Reset")); // kill blocks //16 characters so it fits on a 16x2 display
while(1); // wait for user or serial reset
}
#endif//RESET_MANUAL
#endif // RESET_MANUAL
#endif//USE_WATCHDOG
#endif // USE_WATCHDOG
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment