Skip to content

M
MarlinKimbra
Commit b98132d3 authored by MagoKimbra's avatar MagoKimbra
Browse files
Options

Update Gcode multyline

parent 0d1966f7
Show whitespace changes
Inline Side-by-side
Showing with 121 additions and 114 deletions
MarlinKimbra/Marlin.h
View file @ b98132d3
...@@ -217,8 +217,9 @@ void Stop(); ...@@ -217,8 +217,9 @@ void Stop();
bool IsStopped(); bool IsStopped();
void enquecommand(const char *cmd); //put an ASCII command at the end of the current buffer. bool enquecommand(const char *cmd); //put a single ASCII command at the end of the current buffer or return false when it is full
void enquecommand_P(const char *cmd); //put an ASCII command at the end of the current buffer, read from flash void enquecommands_P(const char *cmd); //put one or many ASCII commands at the end of the current buffer, read from flash
void prepare_arc_move(char isclockwise); void prepare_arc_move(char isclockwise);
void clamp_to_software_endstops(float target[3]); void clamp_to_software_endstops(float target[3]);
......
MarlinKimbra/Marlin_main.cpp
View file @ b98132d3
...@@ -420,6 +420,8 @@ static int serial_count = 0; ...@@ -420,6 +420,8 @@ static int serial_count = 0;
static boolean comment_mode = false; static boolean comment_mode = false;
static char *strchr_pointer; ///< A pointer to find chars in the command string (X, Y, Z, E, etc.) static char *strchr_pointer; ///< A pointer to find chars in the command string (X, Y, Z, E, etc.)
const char* queued_commands_P= NULL; /* pointer to the current line in the active sequence of commands, or NULL when none */
const int sensitive_pins[] = SENSITIVE_PINS; ///< Sensitive pin list for M42 const int sensitive_pins[] = SENSITIVE_PINS; ///< Sensitive pin list for M42
// Inactivity shutdown // Inactivity shutdown
...@@ -494,39 +496,63 @@ void serial_echopair_P(const char *s_P, unsigned long v) ...@@ -494,39 +496,63 @@ void serial_echopair_P(const char *s_P, unsigned long v)
} }
#endif //!SDSUPPORT #endif //!SDSUPPORT
//adds an command to the main command buffer //Injects the next command from the pending sequence of commands, when possible
//thats really done in a non-safe way. //Return false if and only if no command was pending
//needs overworking someday static bool drain_queued_commands_P()
void enquecommand(const char *cmd)
{ {
if(buflen < BUFSIZE) char cmd[30];
{ if(!queued_commands_P)
//this is dangerous if a mixing of serial and this happens return false;
strcpy(&(cmdbuffer[bufindw][0]),cmd); // Get the next 30 chars from the sequence of gcodes to run
SERIAL_ECHO_START; strncpy_P(cmd, queued_commands_P, sizeof(cmd)-1);
SERIAL_ECHOPGM(MSG_Enqueing); cmd[sizeof(cmd)-1]= 0;
SERIAL_ECHO(cmdbuffer[bufindw]); // Look for the end of line, or the end of sequence
SERIAL_ECHOLNPGM("\""); size_t i= 0;
bufindw= (bufindw + 1)%BUFSIZE; char c;
buflen += 1; while( (c= cmd[i]) && c!='\n' )
++i; // look for the end of this gcode command
cmd[i]= 0;
if(enquecommand(cmd)) // buffer was not full (else we will retry later)
{
if(c)
queued_commands_P+= i+1; // move to next command
else
queued_commands_P= NULL; // will have no more commands in the sequence
} }
return true;
} }
void enquecommand_P(const char *cmd) //Record one or many commands to run from program memory.
//Aborts the current queue, if any.
//Note: drain_queued_commands_P() must be called repeatedly to drain the commands afterwards
void enquecommands_P(const char* pgcode)
{ {
if(buflen < BUFSIZE) queued_commands_P = pgcode;
{ drain_queued_commands_P(); // first command exectuted asap (when possible)
}
//adds a single command to the main command buffer, from RAM
//that is really done in a non-safe way.
//needs overworking someday
//Returns false if it failed to do so
bool enquecommand(const char *cmd)
{
if(*cmd==';')
return false;
if(buflen >= BUFSIZE)
return false;
//this is dangerous if a mixing of serial and this happens //this is dangerous if a mixing of serial and this happens
strcpy_P(&(cmdbuffer[bufindw][0]),cmd); strcpy(&(cmdbuffer[bufindw][0]),cmd);
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHOPGM(MSG_Enqueing); SERIAL_ECHOPGM(MSG_Enqueing);
SERIAL_ECHO(cmdbuffer[bufindw]); SERIAL_ECHO(cmdbuffer[bufindw]);
SERIAL_ECHOLNPGM("\""); SERIAL_ECHOLNPGM("\"");
bufindw= (bufindw + 1)%BUFSIZE; bufindw= (bufindw + 1)%BUFSIZE;
buflen += 1; buflen += 1;
} return true;
} }
void setup_killpin() void setup_killpin()
{ {
#if defined(KILL_PIN) && KILL_PIN > -1 #if defined(KILL_PIN) && KILL_PIN > -1
...@@ -622,10 +648,8 @@ void servo_init() ...@@ -622,10 +648,8 @@ void servo_init()
// Set position of Servo Endstops that are defined // Set position of Servo Endstops that are defined
#if (NUM_SERVOS > 0) #if (NUM_SERVOS > 0)
for(int8_t i = 0; i < 3; i++) for(int8_t i = 0; i < 3; i++) {
{ if(servo_endstops[i] > -1) {
if(servo_endstops[i] > -1)
{
servos[servo_endstops[i]].write(servo_endstop_angles[i * 2 + 1]); servos[servo_endstops[i]].write(servo_endstop_angles[i * 2 + 1]);
} }
} }
...@@ -759,30 +783,27 @@ void loop() ...@@ -759,30 +783,27 @@ void loop()
void get_command() void get_command()
{ {
while( MYSERIAL.available() > 0 && buflen < BUFSIZE) if(drain_queued_commands_P()) // priority is given to non-serial commands
{ return;
while( MYSERIAL.available() > 0 && buflen < BUFSIZE) {
serial_char = MYSERIAL.read(); serial_char = MYSERIAL.read();
if(serial_char == '\n' || if(serial_char == '\n' ||
serial_char == '\r' || serial_char == '\r' ||
(serial_char == ':' && comment_mode == false) || (serial_char == ':' && comment_mode == false) ||
serial_count >= (MAX_CMD_SIZE - 1)) serial_count >= (MAX_CMD_SIZE - 1)) {
{ if(!serial_count) { //if empty line
if(!serial_count) //if empty line
{
comment_mode = false; //for new command comment_mode = false; //for new command
return; return;
} }
cmdbuffer[bufindw][serial_count] = 0; //terminate string cmdbuffer[bufindw][serial_count] = 0; //terminate string
if(!comment_mode) if(!comment_mode) {
{
comment_mode = false; //for new command comment_mode = false; //for new command
fromsd[bufindw] = false; fromsd[bufindw] = false;
if(strchr(cmdbuffer[bufindw], 'N') != NULL) if(strchr(cmdbuffer[bufindw], 'N') != NULL) {
{
strchr_pointer = strchr(cmdbuffer[bufindw], 'N'); strchr_pointer = strchr(cmdbuffer[bufindw], 'N');
gcode_N = (strtol(strchr_pointer + 1, NULL, 10)); gcode_N = (strtol(&cmdbuffer[bufindw][strchr_pointer - cmdbuffer[bufindw] + 1], NULL, 10));
if(gcode_N != gcode_LastN+1 && (strstr_P(cmdbuffer[bufindw], PSTR("M110")) == NULL) ) if(gcode_N != gcode_LastN+1 && (strstr_P(cmdbuffer[bufindw], PSTR("M110")) == NULL) ) {
{
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERRORPGM(MSG_ERR_LINE_NO); SERIAL_ERRORPGM(MSG_ERR_LINE_NO);
SERIAL_ERRORLN(gcode_LastN); SERIAL_ERRORLN(gcode_LastN);
...@@ -792,15 +813,13 @@ void get_command() ...@@ -792,15 +813,13 @@ void get_command()
return; return;
} }
if(strchr(cmdbuffer[bufindw], '*') != NULL) if(strchr(cmdbuffer[bufindw], '*') != NULL) {
{
byte checksum = 0; byte checksum = 0;
byte count = 0; byte count = 0;
while(cmdbuffer[bufindw][count] != '*') checksum = checksum^cmdbuffer[bufindw][count++]; while(cmdbuffer[bufindw][count] != '*') checksum = checksum^cmdbuffer[bufindw][count++];
strchr_pointer = strchr(cmdbuffer[bufindw], '*'); strchr_pointer = strchr(cmdbuffer[bufindw], '*');
if( (int)(strtod(strchr_pointer + 1, NULL)) != checksum) if ((int)(strtod(&cmdbuffer[bufindw][strchr_pointer - cmdbuffer[bufindw] + 1], NULL)) != checksum) {
{
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERRORPGM(MSG_ERR_CHECKSUM_MISMATCH); SERIAL_ERRORPGM(MSG_ERR_CHECKSUM_MISMATCH);
SERIAL_ERRORLN(gcode_LastN); SERIAL_ERRORLN(gcode_LastN);
...@@ -810,8 +829,7 @@ void get_command() ...@@ -810,8 +829,7 @@ void get_command()
} }
//if no errors, continue parsing //if no errors, continue parsing
} }
else else {
{
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERRORPGM(MSG_ERR_NO_CHECKSUM); SERIAL_ERRORPGM(MSG_ERR_NO_CHECKSUM);
SERIAL_ERRORLN(gcode_LastN); SERIAL_ERRORLN(gcode_LastN);
...@@ -823,10 +841,8 @@ void get_command() ...@@ -823,10 +841,8 @@ void get_command()
gcode_LastN = gcode_N; gcode_LastN = gcode_N;
//if no errors, continue parsing //if no errors, continue parsing
} }
else // if we don't receive 'N' but still see '*' else { // if we don't receive 'N' but still see '*'
{ if((strchr(cmdbuffer[bufindw], '*') != NULL)) {
if((strchr(cmdbuffer[bufindw], '*') != NULL))
{
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERRORPGM(MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM); SERIAL_ERRORPGM(MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM);
SERIAL_ERRORLN(gcode_LastN); SERIAL_ERRORLN(gcode_LastN);
...@@ -834,17 +850,14 @@ void get_command() ...@@ -834,17 +850,14 @@ void get_command()
return; return;
} }
} }
if((strchr(cmdbuffer[bufindw], 'G') != NULL)) if((strchr(cmdbuffer[bufindw], 'G') != NULL)) {
{
strchr_pointer = strchr(cmdbuffer[bufindw], 'G'); strchr_pointer = strchr(cmdbuffer[bufindw], 'G');
switch((int)((strtod(strchr_pointer + 1, NULL)))) switch((int)((strtod(&cmdbuffer[bufindw][strchr_pointer - cmdbuffer[bufindw] + 1], NULL)))) {
{
case 0: case 0:
case 1: case 1:
case 2: case 2:
case 3: case 3:
if (Stopped == true) if (Stopped == true) {
{
SERIAL_ERRORLNPGM(MSG_ERR_STOPPED); SERIAL_ERRORLNPGM(MSG_ERR_STOPPED);
LCD_MESSAGEPGM(MSG_STOPPED); LCD_MESSAGEPGM(MSG_STOPPED);
} }
...@@ -855,21 +868,22 @@ void get_command() ...@@ -855,21 +868,22 @@ void get_command()
} }
//If command was e-stop process now //If command was e-stop process now
if(strcmp(cmdbuffer[bufindw], "M112") == 0) kill(); if(strcmp(cmdbuffer[bufindw], "M112") == 0)
kill();
bufindw = (bufindw + 1)%BUFSIZE; bufindw = (bufindw + 1)%BUFSIZE;
buflen += 1; buflen += 1;
} }
serial_count = 0; //clear buffer serial_count = 0; //clear buffer
} }
else else {
{
if(serial_char == ';') comment_mode = true; if(serial_char == ';') comment_mode = true;
if(!comment_mode) cmdbuffer[bufindw][serial_count++] = serial_char; if(!comment_mode) cmdbuffer[bufindw][serial_count++] = serial_char;
} }
} }
#ifdef SDSUPPORT #ifdef SDSUPPORT
if(!card.sdprinting || serial_count!=0) return; if(!card.sdprinting || serial_count!=0) {
return;
}
//'#' stops reading from SD to the buffer prematurely, so procedural macro calls are possible //'#' stops reading from SD to the buffer prematurely, so procedural macro calls are possible
// if it occurs, stop_buffering is triggered and the buffer is ran dry. // if it occurs, stop_buffering is triggered and the buffer is ran dry.
...@@ -878,18 +892,15 @@ void get_command() ...@@ -878,18 +892,15 @@ void get_command()
static bool stop_buffering=false; static bool stop_buffering=false;
if(buflen==0) stop_buffering=false; if(buflen==0) stop_buffering=false;
while( !card.eof() && buflen < BUFSIZE && !stop_buffering) while (!card.eof() && buflen < BUFSIZE && !stop_buffering) {
{
int16_t n=card.get(); int16_t n=card.get();
serial_char = (char)n; serial_char = (char)n;
if(serial_char == '\n' || if (serial_char == '\n' ||
serial_char == '\r' || serial_char == '\r' ||
(serial_char == '#' && comment_mode == false) || (serial_char == '#' && comment_mode == false) ||
(serial_char == ':' && comment_mode == false) || (serial_char == ':' && comment_mode == false) ||
serial_count >= (MAX_CMD_SIZE - 1)||n==-1) serial_count >= (MAX_CMD_SIZE - 1)||n==-1) {
{ if (card.eof()) {
if(card.eof())
{
SERIAL_PROTOCOLLNPGM(MSG_FILE_PRINTED); SERIAL_PROTOCOLLNPGM(MSG_FILE_PRINTED);
stoptime=millis(); stoptime=millis();
char time[30]; char time[30];
...@@ -904,9 +915,9 @@ void get_command() ...@@ -904,9 +915,9 @@ void get_command()
card.printingHasFinished(); card.printingHasFinished();
card.checkautostart(true); card.checkautostart(true);
} }
if(serial_char=='#') stop_buffering=true; if(serial_char=='#')
if(!serial_count) stop_buffering=true;
{ if(!serial_count) {
comment_mode = false; //for new command comment_mode = false; //for new command
return; //if empty line return; //if empty line
} }
...@@ -919,8 +930,7 @@ void get_command() ...@@ -919,8 +930,7 @@ void get_command()
comment_mode = false; //for new command comment_mode = false; //for new command
serial_count = 0; //clear buffer serial_count = 0; //clear buffer
} }
else else {
{
if(serial_char == ';') comment_mode = true; if(serial_char == ';') comment_mode = true;
if(!comment_mode) cmdbuffer[bufindw][serial_count++] = serial_char; if(!comment_mode) cmdbuffer[bufindw][serial_count++] = serial_char;
} }
...@@ -930,12 +940,12 @@ void get_command() ...@@ -930,12 +940,12 @@ void get_command()
float code_value() float code_value()
{ {
return (strtod(strchr_pointer + 1, NULL)); return (strtod(&cmdbuffer[bufindr][strchr_pointer - cmdbuffer[bufindr] + 1], NULL));
} }
long code_value_long() long code_value_long()
{ {
return (strtol(strchr_pointer + 1, NULL, 10)); return (strtol(&cmdbuffer[bufindr][strchr_pointer - cmdbuffer[bufindr] + 1], NULL, 10));
} }
bool code_seen(char code) bool code_seen(char code)
...@@ -4819,16 +4829,18 @@ void process_commands() ...@@ -4819,16 +4829,18 @@ void process_commands()
#if (LARGE_FLASH == true && ( BEEPER > 0 || defined(ULTRALCD) || defined(LCD_USE_I2C_BUZZER))) #if (LARGE_FLASH == true && ( BEEPER > 0 || defined(ULTRALCD) || defined(LCD_USE_I2C_BUZZER)))
case 300: //M300 case 300: //M300
{ {
int beepS = code_seen('S') ? code_value() : 110; int beepS = code_seen('S') ? code_value() : 1000;
int beepP = code_seen('P') ? code_value() : 1000; int beepP = code_seen('P') ? code_value() : 100;
if (beepS > 0) if (beepS > 0)
{ {
#if BEEPER > 0 #if BEEPER > 0
tone(BEEPER, beepS); SET_OUTPUT(BEEPER);
WRITE(BEEPER,HIGH);
delay(beepP);
WRITE(BEEPER,LOW);
delay(beepP); delay(beepP);
noTone(BEEPER);
#elif defined(ULTRALCD) #elif defined(ULTRALCD)
lcd_buzz(beepS, beepP); lcd_buzz(beepP, beepS);
#elif defined(LCD_USE_I2C_BUZZER) #elif defined(LCD_USE_I2C_BUZZER)
lcd_buzz(beepP, beepS); lcd_buzz(beepP, beepS);
#endif #endif
...@@ -5957,17 +5969,15 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) //default argument s ...@@ -5957,17 +5969,15 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) //default argument s
#endif #endif
if (buflen < (BUFSIZE-1)) get_command(); if (buflen < (BUFSIZE-1))
get_command();
if ((millis() - previous_millis_cmd) > max_inactive_time ) if ((millis() - previous_millis_cmd) > max_inactive_time )
if(max_inactive_time) if(max_inactive_time)
kill(); kill();
if (stepper_inactive_time) if (stepper_inactive_time) {
{ if ((millis() - previous_millis_cmd) > stepper_inactive_time) {
if ((millis() - previous_millis_cmd) > stepper_inactive_time) if(blocks_queued() == false) {
{
if(blocks_queued() == false)
{
disable_x(); disable_x();
disable_y(); disable_y();
disable_z(); disable_z();
...@@ -5988,12 +5998,10 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) //default argument s ...@@ -5988,12 +5998,10 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) //default argument s
// Check if the kill button was pressed and wait just in case it was an accidental // Check if the kill button was pressed and wait just in case it was an accidental
// key kill key press // key kill key press
// ------------------------------------------------------------------------------- // -------------------------------------------------------------------------------
if (READ(KILL_PIN) == 0) if (READ(KILL_PIN) == 0) {
{
killCount++; killCount++;
} }
else if (killCount > 0) else if (killCount > 0) {
{
killCount--; killCount--;
} }
// Exceeded threshold and we can confirm that it was not accidental // Exceeded threshold and we can confirm that it was not accidental
...@@ -6012,7 +6020,7 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) //default argument s ...@@ -6012,7 +6020,7 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) //default argument s
{ {
if (homeDebounceCount == 0) if (homeDebounceCount == 0)
{ {
enquecommand_P((PSTR("G28"))); enquecommands_P((PSTR("G28")));
homeDebounceCount++; homeDebounceCount++;
LCD_ALERTMESSAGEPGM(MSG_AUTO_HOME); LCD_ALERTMESSAGEPGM(MSG_AUTO_HOME);
} }
......
MarlinKimbra/cardreader.cpp
View file @ b98132d3
...@@ -532,7 +532,7 @@ void CardReader::checkautostart(bool force) ...@@ -532,7 +532,7 @@ void CardReader::checkautostart(bool force)
sprintf_P(cmd, PSTR("M23 %s"), autoname); sprintf_P(cmd, PSTR("M23 %s"), autoname);
enquecommand(cmd); enquecommand(cmd);
enquecommand_P(PSTR("M24")); enquecommands_P(PSTR("M24"));
found=true; found=true;
} }
} }
...@@ -637,7 +637,7 @@ void CardReader::printingHasFinished() ...@@ -637,7 +637,7 @@ void CardReader::printingHasFinished()
if(SD_FINISHED_STEPPERRELEASE) if(SD_FINISHED_STEPPERRELEASE)
{ {
//finishAndDisableSteppers(); //finishAndDisableSteppers();
enquecommand_P(PSTR(SD_FINISHED_RELEASECOMMAND)); enquecommands_P(PSTR(SD_FINISHED_RELEASECOMMAND));
} }
autotempShutdown(); autotempShutdown();
} }
......
MarlinKimbra/dogm_lcd_implementation.h
View file @ b98132d3
...@@ -92,6 +92,9 @@ U8GLIB_ST7920_128X64_RRD u8g(0); ...@@ -92,6 +92,9 @@ U8GLIB_ST7920_128X64_RRD u8g(0);
#elif defined(MAKRPANEL) #elif defined(MAKRPANEL)
// The MaKrPanel display, ST7565 controller as well // The MaKrPanel display, ST7565 controller as well
U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0); U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0);
#elif defined(VIKI2) || defined(miniVIKI)
// Mini Viki and Viki 2.0 LCD, ST7565 controller as well
U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0);
#else #else
// for regular DOGM128 display with HW-SPI // for regular DOGM128 display with HW-SPI
U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0); // HW-SPI Com: CS, A0 U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0); // HW-SPI Com: CS, A0
......
MarlinKimbra/ultralcd.cpp
View file @ b98132d3
...@@ -329,9 +329,8 @@ static void lcd_sdcard_stop() ...@@ -329,9 +329,8 @@ static void lcd_sdcard_stop()
card.sdprinting = false; card.sdprinting = false;
card.closefile(); card.closefile();
quickStop(); quickStop();
if(SD_FINISHED_STEPPERRELEASE) if(SD_FINISHED_STEPPERRELEASE) {
{ enquecommands_P(PSTR(SD_FINISHED_RELEASECOMMAND));
enquecommand_P(PSTR(SD_FINISHED_RELEASECOMMAND));
} }
autotempShutdown(); autotempShutdown();
...@@ -402,14 +401,11 @@ void lcd_set_home_offsets() ...@@ -402,14 +401,11 @@ void lcd_set_home_offsets()
plan_set_position(0.0, 0.0, 0.0, current_position[E_AXIS]); plan_set_position(0.0, 0.0, 0.0, current_position[E_AXIS]);
// Audio feedback // Audio feedback
enquecommand_P(PSTR("M300 S659 P200")); enquecommands_P(PSTR("M300 S659 P200\nM300 S698 P200"));
enquecommand_P(PSTR("M300 S698 P200"));
lcd_return_to_status(); lcd_return_to_status();
} }
#ifdef BABYSTEPPING #ifdef BABYSTEPPING
static void _lcd_babystep(int axis, const char *msg) { static void _lcd_babystep(int axis, const char *msg) {
if (encoderPosition != 0) { if (encoderPosition != 0) {
babystepsTodo[axis] += (int)encoderPosition; babystepsTodo[axis] += (int)encoderPosition;
...@@ -422,7 +418,6 @@ void lcd_set_home_offsets() ...@@ -422,7 +418,6 @@ void lcd_set_home_offsets()
static void lcd_babystep_x() { _lcd_babystep(X_AXIS, PSTR(MSG_BABYSTEPPING_X)); } static void lcd_babystep_x() { _lcd_babystep(X_AXIS, PSTR(MSG_BABYSTEPPING_X)); }
static void lcd_babystep_y() { _lcd_babystep(Y_AXIS, PSTR(MSG_BABYSTEPPING_Y)); } static void lcd_babystep_y() { _lcd_babystep(Y_AXIS, PSTR(MSG_BABYSTEPPING_Y)); }
static void lcd_babystep_z() { _lcd_babystep(Z_AXIS, PSTR(MSG_BABYSTEPPING_Z)); } static void lcd_babystep_z() { _lcd_babystep(Z_AXIS, PSTR(MSG_BABYSTEPPING_Z)); }
#endif //BABYSTEPPING #endif //BABYSTEPPING
static void lcd_tune_menu() static void lcd_tune_menu()
...@@ -1356,7 +1351,7 @@ menu_edit_type(unsigned long, long5, ftostr5, 0.01) ...@@ -1356,7 +1351,7 @@ menu_edit_type(unsigned long, long5, ftostr5, 0.01)
lcd_move_y(); lcd_move_y();
} }
static void reprapworld_keypad_move_home() { static void reprapworld_keypad_move_home() {
enquecommand_P((PSTR("G28"))); // move all axis home enquecommands_P((PSTR("G28"))); // move all axis home
} }
#endif #endif
...@@ -1372,7 +1367,7 @@ static void lcd_quick_feedback() ...@@ -1372,7 +1367,7 @@ static void lcd_quick_feedback()
/** Menu action functions **/ /** Menu action functions **/
static void menu_action_back(menuFunc_t data) { lcd_goto_menu(data); } static void menu_action_back(menuFunc_t data) { lcd_goto_menu(data); }
static void menu_action_submenu(menuFunc_t data) { lcd_goto_menu(data); } static void menu_action_submenu(menuFunc_t data) { lcd_goto_menu(data); }
static void menu_action_gcode(const char* pgcode) { enquecommand_P(pgcode); } static void menu_action_gcode(const char* pgcode) { enquecommands_P(pgcode); }
static void menu_action_function(menuFunc_t data) { (*data)(); } static void menu_action_function(menuFunc_t data) { (*data)(); }
static void menu_action_sdfile(const char* filename, char* longFilename) static void menu_action_sdfile(const char* filename, char* longFilename)
{ {
...@@ -1382,7 +1377,7 @@ static void menu_action_sdfile(const char* filename, char* longFilename) ...@@ -1382,7 +1377,7 @@ static void menu_action_sdfile(const char* filename, char* longFilename)
for(c = &cmd[4]; *c; c++) for(c = &cmd[4]; *c; c++)
*c = tolower(*c); *c = tolower(*c);
enquecommand(cmd); enquecommand(cmd);
enquecommand_P(PSTR("M24")); enquecommands_P(PSTR("M24"));
lcd_return_to_status(); lcd_return_to_status();
} }
static void menu_action_sddirectory(const char* filename, char* longFilename) static void menu_action_sddirectory(const char* filename, char* longFilename)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment