Skip to content

M
MarlinKimbra
Commit b5793542 authored by MagoKimbra's avatar MagoKimbra
Browse files
Options

Fix any language

parent 05115f24
Show whitespace changes
Inline Side-by-side
Showing with 131 additions and 29 deletions
MarlinKimbra/language_an.h
View file @ b5793542
......@@ -15,22 +15,32 @@
#define MSG_AUTOSTART " Autostart"
#define MSG_DISABLE_STEPPERS "Amortar motors"
#define MSG_AUTO_HOME "Levar a l'orichen"
#define MSG_BED_SETTING "Bed Setting"
#define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Establir zero"
#define MSG_PREHEAT_PLA "Precalentar PLA"
#define MSG_PREHEAT_PLA0 "Precalentar PLA0"
#define MSG_PREHEAT_PLA1 "Precalentar PLA1"
#define MSG_PREHEAT_PLA2 "Precalentar PLA2"
#define MSG_PREHEAT_PLA012 "Precalentar PLA a"
#define MSG_PREHEAT_PLA3 "Preheat PLA 4"
#define MSG_PREHEAT_PLA0123 "Preheat PLA All"
#define MSG_PREHEAT_PLA_BEDONLY "Prec. PLA Base"
#define MSG_PREHEAT_PLA_SETTINGS "Achustar tem. PLA"
#define MSG_PREHEAT_ABS "Precalentar ABS"
#define MSG_PREHEAT_ABS0 "Precalentar ABS0"
#define MSG_PREHEAT_ABS1 "Precalentar ABS1"
#define MSG_PREHEAT_ABS2 "Precalentar ABS2"
#define MSG_PREHEAT_ABS012 "Precalentar ABS a"
#define MSG_PREHEAT_ABS3 "Preheat ABS 4"
#define MSG_PREHEAT_ABS0123 "Preheat ABS All"
#define MSG_PREHEAT_ABS_BEDONLY "Prec. ABS Base"
#define MSG_PREHEAT_ABS_SETTINGS "Achustar tem. ABS"
#define MSG_PREHEAT_GUM "Preheat GUM"
#define MSG_PREHEAT_GUM0 "Preheat GUM 1"
#define MSG_PREHEAT_GUM1 "Preheat GUM 2"
#define MSG_PREHEAT_GUM2 "Preheat GUM 3"
#define MSG_PREHEAT_GUM3 "Preheat GUM 4"
#define MSG_PREHEAT_GUM_BEDONLY "Preheat GUM Bed"
#define MSG_PREHEAT_GUM_SETTINGS "Preheat GUM conf"
#define MSG_COOLDOWN "Enfriar"
#define MSG_SWITCH_PS_ON "Enchegar Fuent"
#define MSG_SWITCH_PS_OFF "Desenchegar Fuent"
......@@ -43,6 +53,7 @@
#define MSG_MOVE_E "Extruder"
#define MSG_MOVE_E1 "Extruder2"
#define MSG_MOVE_E2 "Extruder3"
#define MSG_MOVE_E3 "Extruder4"
#define MSG_MOVE_01MM "Move 0.1mm"
#define MSG_MOVE_1MM "Move 1mm"
#define MSG_MOVE_10MM "Move 10mm"
......@@ -50,12 +61,14 @@
#define MSG_NOZZLE "Nozzle"
#define MSG_NOZZLE1 "Nozzle2"
#define MSG_NOZZLE2 "Nozzle3"
#define MSG_NOZZLE3 "Nozzle4"
#define MSG_BED "Base"
#define MSG_FAN_SPEED "Ixoriador"
#define MSG_FLOW "Fluxo"
#define MSG_FLOW0 "Fluxo 0"
#define MSG_FLOW1 "Fluxo 1"
#define MSG_FLOW2 "Fluxo 2"
#define MSG_FLOW3 "Flow 3"
#define MSG_CONTROL "Control"
#define MSG_MIN "\002 Min"
#define MSG_MAX "\002 Max"
......@@ -75,7 +88,7 @@
#define MSG_X "x"
#define MSG_Y "y"
#define MSG_Z "z"
#define MSG_E "y"
#define MSG_E "e"
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "VTrav min"
#define MSG_AMAX "Amax"
......@@ -83,7 +96,10 @@
#define MSG_XSTEPS "X trangos/mm"
#define MSG_YSTEPS "Y trangos/mm"
#define MSG_ZSTEPS "Z trangos/mm"
#define MSG_ESTEPS "E trangos/mm"
#define MSG_E0STEPS "E0steps/mm"
#define MSG_E1STEPS "E1steps/mm"
#define MSG_E2STEPS "E2steps/mm"
#define MSG_E3STEPS "E3steps/mm"
#define MSG_TEMPERATURE "Temperatura"
#define MSG_MOTION "Movimiento"
#define MSG_CONTRAST "Contrast"
......@@ -124,16 +140,39 @@
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
#define MSG_RECTRACT "Retract"
#define MSG_LASER "Laser Preset"
#define MSG_CONFIG "Configuration"
#define MSG_BAUDRATE "Baudrate"
#define MSG_RECTRACT "Rectract"
#define MSG_E_BOWDEN_LENGTH "Extrude " STRINGIFY(BOWDEN_LENGTH) "mm"
#define MSG_R_BOWDEN_LENGTH "Retract " STRINGIFY(BOWDEN_LENGTH) "mm"
#define MSG_PURGE_XMM "Purge " STRINGIFY(LCD_PURGE_LENGTH) "mm"
#define MSG_RETRACT_XMM "Retract " STRINGIFY(LCD_RETRACT_LENGTH) "mm"
#define MSG_RECTRACT "Retraer"
#define MSG_RECTRACT_WIDE "Retraer"
#define MSG_TEMPERATURE_WIDE "Temperatura"
#define MSG_TEMPERATURE_RTN "Temperatura"
#define MSG_MAIN_WIDE "Menu Prencipal"
#define MSG_MOTION_WIDE "Movimiento"
#define MSG_PREPARE_ALT "Preparar"
#define MSG_CONTROL_ARROW "Control \x7E"
#define MSG_RETRACT_ARROW "Retraer \x7E"
#define MSG_STEPPER_RELEASED "Desacoplada."
#ifdef DELTA
#define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
#define MSG_DELTA_CALIBRATE_Y "Calibrate Y"
#define MSG_DELTA_CALIBRATE_Z "Calibrate Z"
#define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center"
#endif // DELTA
#ifdef FIRMWARE_TEST
#define MSG_FWTEST_YES "Put the Y command to go next"
#define MSG_FWTEST_NO "Put the N command to go next"
#define MSG_FWTEST_YES_NO "Put the Y or N command to go next"
#define MSG_FWTEST_ENDSTOP_ERR "ENDSTOP ERROR! Check wire and connection"
#define MSG_FWTEST_PRESS "Press and hold the endstop "
#define MSG_FWTEST_INVERT "Reverse value in "
#define MSG_FWTEST_XAXIS "Has the nozzle moved to the right?"
#define MSG_FWTEST_YAXIS "Has the nozzle moved forward?"
#define MSG_FWTEST_ZAXIS "Has the nozzle moved up?"
#define MSG_FWTEST_01 "Manually move the axes X, Y and Z away from the endstop"
#define MSG_FWTEST_02 "Do you want check ENDSTOP?"
#define MSG_FWTEST_03 "Start check ENDSTOP"
#define MSG_FWTEST_04 "Start check MOTOR"
#define MSG_FWTEST_ATTENTION "ATTENTION! Check that the three axes are more than 5 mm from the endstop!"
#endif // FIRMWARE_TEST
#endif // LANGUAGE_AN_H
MarlinKimbra/language_de.h
View file @ b5793542
......@@ -15,22 +15,32 @@
#define MSG_AUTOSTART "Autostart"
#define MSG_DISABLE_STEPPERS "Stepper abschalt."
#define MSG_AUTO_HOME "Auto Nullpunkt"
#define MSG_BED_SETTING "Bed Setting"
#define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Setze Nullpunkt"
#define MSG_PREHEAT_PLA "Vorwärmen PLA"
#define MSG_PREHEAT_PLA0 "Vorwärmen PLA 1"
#define MSG_PREHEAT_PLA1 "Vorwärmen PLA 2"
#define MSG_PREHEAT_PLA2 "Vorwärmen PLA 3"
#define MSG_PREHEAT_PLA012 "Vorw. PLA Alle"
#define MSG_PREHEAT_PLA3 "Preheat PLA 4"
#define MSG_PREHEAT_PLA0123 "Preheat PLA All"
#define MSG_PREHEAT_PLA_BEDONLY "Vorw. PLA Bett"
#define MSG_PREHEAT_PLA_SETTINGS "Vorwärm. PLA Ein."
#define MSG_PREHEAT_ABS "Vorwärmen ABS"
#define MSG_PREHEAT_ABS0 "Vorwärmen ABS 1"
#define MSG_PREHEAT_ABS1 "Vorwärmen ABS 2"
#define MSG_PREHEAT_ABS2 "Vorwärmen ABS 3"
#define MSG_PREHEAT_ABS012 "Vorw. ABS Alle"
#define MSG_PREHEAT_ABS3 "Preheat ABS 4"
#define MSG_PREHEAT_ABS0123 "Preheat ABS All"
#define MSG_PREHEAT_ABS_BEDONLY "Vorw. ABS Bett"
#define MSG_PREHEAT_ABS_SETTINGS "Vorwärm. ABS Ein."
#define MSG_PREHEAT_GUM "Preheat GUM"
#define MSG_PREHEAT_GUM0 "Preheat GUM 1"
#define MSG_PREHEAT_GUM1 "Preheat GUM 2"
#define MSG_PREHEAT_GUM2 "Preheat GUM 3"
#define MSG_PREHEAT_GUM3 "Preheat GUM 4"
#define MSG_PREHEAT_GUM_BEDONLY "Preheat GUM Bed"
#define MSG_PREHEAT_GUM_SETTINGS "Preheat GUM conf"
#define MSG_COOLDOWN "Abkühlen"
#define MSG_SWITCH_PS_ON "Switch Power On"
#define MSG_SWITCH_PS_OFF "Switch Power Off"
......@@ -43,6 +53,7 @@
#define MSG_MOVE_E "Extruder"
#define MSG_MOVE_E1 "Extruder2"
#define MSG_MOVE_E2 "Extruder3"
#define MSG_MOVE_E3 "Extruder4"
#define MSG_MOVE_01MM "0.1mm bewegen"
#define MSG_MOVE_1MM "1mm bewegen"
#define MSG_MOVE_10MM "10mm bewegen"
......@@ -50,12 +61,14 @@
#define MSG_NOZZLE "Düse"
#define MSG_NOZZLE1 "Düse2"
#define MSG_NOZZLE2 "Düse3"
#define MSG_NOZZLE3 "Düse4"
#define MSG_BED "Bett"
#define MSG_FAN_SPEED "Lüftergeschw."
#define MSG_FLOW "Fluss"
#define MSG_FLOW0 "Fluss 0"
#define MSG_FLOW1 "Fluss 1"
#define MSG_FLOW2 "Fluss 2"
#define MSG_FLOW3 "Fluss 3"
#define MSG_CONTROL "Einstellungen"
#define MSG_MIN "\002 Min"
#define MSG_MAX "\002 Max"
......@@ -83,7 +96,10 @@
#define MSG_XSTEPS "Xsteps/mm"
#define MSG_YSTEPS "Ysteps/mm"
#define MSG_ZSTEPS "Zsteps/mm"
#define MSG_ESTEPS "Esteps/mm"
#define MSG_E0STEPS "E0steps/mm"
#define MSG_E1STEPS "E1steps/mm"
#define MSG_E2STEPS "E2steps/mm"
#define MSG_E3STEPS "E3steps/mm"
#define MSG_TEMPERATURE "Temperatur"
#define MSG_MOTION "Bewegung"
#define MSG_CONTRAST "LCD contrast"
......@@ -124,8 +140,39 @@
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
#define MSG_RECTRACT "Retract"
#define MSG_LASER "Laser Preset"
#define MSG_CONFIG "Configuration"
#define MSG_BAUDRATE "Baudrate"
#define MSG_RECTRACT "Rectract"
#define MSG_E_BOWDEN_LENGTH "Extrude " STRINGIFY(BOWDEN_LENGTH) "mm"
#define MSG_R_BOWDEN_LENGTH "Retract " STRINGIFY(BOWDEN_LENGTH) "mm"
#define MSG_PURGE_XMM "Purge " STRINGIFY(LCD_PURGE_LENGTH) "mm"
#define MSG_RETRACT_XMM "Retract " STRINGIFY(LCD_RETRACT_LENGTH) "mm"
#define MSG_STEPPER_RELEASED "Stepper frei"
#define MSG_RECTRACT_WIDE "Rectract"
#ifdef DELTA
#define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
#define MSG_DELTA_CALIBRATE_Y "Calibrate Y"
#define MSG_DELTA_CALIBRATE_Z "Calibrate Z"
#define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center"
#endif // DELTA
#ifdef FIRMWARE_TEST
#define MSG_FWTEST_YES "Put the Y command to go next"
#define MSG_FWTEST_NO "Put the N command to go next"
#define MSG_FWTEST_YES_NO "Put the Y or N command to go next"
#define MSG_FWTEST_ENDSTOP_ERR "ENDSTOP ERROR! Check wire and connection"
#define MSG_FWTEST_PRESS "Press and hold the endstop "
#define MSG_FWTEST_INVERT "Reverse value in "
#define MSG_FWTEST_XAXIS "Has the nozzle moved to the right?"
#define MSG_FWTEST_YAXIS "Has the nozzle moved forward?"
#define MSG_FWTEST_ZAXIS "Has the nozzle moved up?"
#define MSG_FWTEST_01 "Manually move the axes X, Y and Z away from the endstop"
#define MSG_FWTEST_02 "Do you want check ENDSTOP?"
#define MSG_FWTEST_03 "Start check ENDSTOP"
#define MSG_FWTEST_04 "Start check MOTOR"
#define MSG_FWTEST_ATTENTION "ATTENTION! Check that the three axes are more than 5 mm from the endstop!"
#endif // FIRMWARE_TEST
#endif // LANGUAGE_DE_H
MarlinKimbra/language_en.h
View file @ b5793542
......@@ -61,6 +61,7 @@
#define MSG_NOZZLE "Nozzle"
#define MSG_NOZZLE1 "Nozzle2"
#define MSG_NOZZLE2 "Nozzle3"
#define MSG_NOZZLE3 "Nozzle4"
#define MSG_BED "Bed"
#define MSG_FAN_SPEED "Fan speed"
#define MSG_FLOW "Flow"
......@@ -139,6 +140,7 @@
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
#define MSG_RECTRACT "Retract"
#define MSG_LASER "Laser Preset"
#define MSG_CONFIG "Configuration"
#define MSG_BAUDRATE "Baudrate"
......
MarlinKimbra/language_it.h
View file @ b5793542
......@@ -16,6 +16,7 @@
#define MSG_DISABLE_STEPPERS "Disabilita Motori"
#define MSG_AUTO_HOME "Auto Home"
#define MSG_BED_SETTING "Bed Setting"
#define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Imposta Origine"
#define MSG_PREHEAT_PLA "Preriscalda PLA"
#define MSG_PREHEAT_PLA0 "Preriscalda PLA 1"
......@@ -83,18 +84,18 @@
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX "Vmax"
#define MSG_VMAX "Vmax "
#define MSG_X "x"
#define MSG_Y "y"
#define MSG_Z "z"
#define MSG_E "e"
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "VTrav min"
#define MSG_AMAX "Amax"
#define MSG_AMAX "Amax "
#define MSG_A_RETRACT "A-retract"
#define MSG_XSTEPS "Xpassi/mm"
#define MSG_YSTEPS "Ypassi/mm"
#define MSG_ZSTEPS "Zpassi/mm"
#define MSG_XSTEPS "Xsteps/mm"
#define MSG_YSTEPS "Ysteps/mm"
#define MSG_ZSTEPS "Zsteps/mm"
#define MSG_E0STEPS "E0steps/mm"
#define MSG_E1STEPS "E1steps/mm"
#define MSG_E2STEPS "E2steps/mm"
......@@ -145,6 +146,19 @@
#define MSG_LASER "Laser Preset"
#define MSG_CONFIG "Configurazione"
#define MSG_BAUDRATE "Baudrate"
#define MSG_RECTRACT "Rectract"
#define MSG_E_BOWDEN_LENGTH "Extrude " STRINGIFY(BOWDEN_LENGTH) "mm"
#define MSG_R_BOWDEN_LENGTH "Retract " STRINGIFY(BOWDEN_LENGTH) "mm"
#define MSG_PURGE_XMM "Purge " STRINGIFY(LCD_PURGE_LENGTH) "mm"
#define MSG_RETRACT_XMM "Retract " STRINGIFY(LCD_RETRACT_LENGTH) "mm"
#ifdef DELTA
#define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
#define MSG_DELTA_CALIBRATE_Y "Calibrate Y"
#define MSG_DELTA_CALIBRATE_Z "Calibrate Z"
#define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center"
#endif // DELTA
#ifdef FIRMWARE_TEST
#define MSG_FWTEST_YES "Dai il comando Y per andare avanti"
......
MarlinKimbra/pins.h
View file @ b5793542
......@@ -904,9 +904,9 @@
#define SCK_PIN 52
#define MISO_PIN 50
#define MOSI_PIN 51
#define MAX6675_SS 53
#define MAX6675_SS 66// Do not use pin 53 if there is even the remote possibility of using Dsplay/SD card
#else
#define MAX6675_SS 49
#define MAX6675_SS 66// Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
#endif
#endif // RAMPS_OLD || RAMPS_13_EFB || RAMPS_13_EEB || RAMPS_13_EFF || 3DRAG
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment