Skip to content

M
MarlinKimbra
Commit b3267d28 authored by MagoKimbra's avatar MagoKimbra
Browse files
Options

Merge remote-tracking branch 'refs/remotes/origin/master' into dev

parents c8b078fb 7abefaf8
Expand all Show whitespace changes
Inline Side-by-side
Showing with 6017 additions and 5817 deletions
Documentation/GCodes.md
View file @ b3267d28
......@@ -61,7 +61,8 @@
* M105 - Read current temp
* M106 - Fan on
* M107 - Fan off
* M109 - S[xxx] Wait for extruder current temp to reach target temp. Waits only when heating - R[xxx] Wait for extruder current temp to reach target temp. Waits when heating and cooling
* M109 - S[xxx] Wait for extruder current temp to reach target temp. Waits only when heating
- R[xxx] Wait for extruder current temp to reach target temp. Waits when heating and cooling
* M111 - Debug Dryrun Repetier
* M112 - Emergency stop
* M114 - Output current position to serial port, (V)erbose for user
......@@ -81,7 +82,8 @@
* M163 - Set a single proportion for a mixing extruder. Requires COLOR_MIXING_EXTRUDER.
* M164 - Save the mix as a virtual extruder. Requires COLOR_MIXING_EXTRUDER and MIXING_VIRTUAL_TOOLS.
* M165 - Set the proportions for a mixing extruder. Use parameters ABCDHI to set the mixing factors. Requires COLOR_MIXING_EXTRUDER.
* M190 - S[xxx] Wait for bed current temp to reach target temp. Waits only when heating - R[xxx] Wait for bed current temp to reach target temp. Waits when heating and cooling
* M190 - S[xxx] Wait for bed current temp to reach target temp. Waits only when heating
- R[xxx] Wait for bed current temp to reach target temp. Waits when heating and cooling
* M200 - D[millimeters]- set filament diameter and set E axis units to cubic millimeters (use S0 to set back to millimeters).
* M201 - Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000 Z1000 E0 S1000 E1 S1000 E2 S1000 E3 S1000) in mm/sec^2
* M203 - Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E0 S1000 E1 S1000 E2 S1000 E3 S1000) in mm/sec
......
Documentation/changelog.md
View file @ b3267d28
### Version 4.2.8
* Add board folder with files of various board containing the pins
* Rewrite macros
* Fix M109 so it won't wait for cooling
* Clear code
* Bug fix
### Version 4.2.7
* Add M906 Set motor Currents for ALLIGATOR board
* Add M408 JSON OUTPUT
......
MK/Boards.h
View file @ b3267d28
......@@ -98,6 +98,7 @@
#define BOARD_DUEMILANOVE_328P 4 // Duemilanove w/ ATMega328P pin assignments
#define BOARD_MKS_BASE 40 // MKS BASE 1.0
#define BOARD_MKS_MINI 41 // MKS MINI 1.0
#define BOARD_RADDS 402 // RADDS ARM 32
#define BOARD_RAMPS_FD_V1 403 // RAMPS-FD V1 ARM 32
#define BOARD_RAMPS_FD_V2 404 // RAMPS-FD V2 ARM 32
......
MK/Configuration_Version.h
View file @ b3267d28
......@@ -2,9 +2,10 @@
#define CONFIGURATION_VERSION_H
#define FIRMWARE_NAME "MK"
#define SHORT_BUILD_VERSION "4.2.7_dev"
#define SHORT_BUILD_VERSION "4.2.8_dev"
#define BUILD_VERSION FIRMWARE_NAME "_" SHORT_BUILD_VERSION
#define STRING_DISTRIBUTION_DATE __DATE__ " " __TIME__ // build date and time
// It might also be appropriate to define a location where additional information can be found
#define FIRMWARE_BIT_BOARDS 8
#define FIRMWARE_URL "https://github.com/MagoKimbra/MarlinKimbra"
#endif
MK/Pins.h deleted 100644 → 0
View file @ c8b078fb
This diff is collapsed.
MK/module/HAL/HardwareSerial.cpp
View file @ b3267d28
......@@ -60,7 +60,7 @@
#endif
if (useU2X) {
M_UCSRxA = BIT(M_U2Xx);
M_UCSRxA = _BV(M_U2Xx);
baud_setting = (F_CPU / 4 / baud - 1) / 2;
}
else {
......
MK/module/MK_Main.cpp
View file @ b3267d28
......@@ -101,7 +101,6 @@ millis_t print_job_start_ms = 0; ///< Print job start time
millis_t print_job_stop_ms = 0; ///< Print job stop time
static uint8_t target_extruder;
bool no_wait_for_cooling = true;
bool target_direction;
bool software_endstops = true;
unsigned long printer_usage_seconds;
......@@ -1320,8 +1319,8 @@ static void clean_up_after_endstop_move() {
enum ProbeAction {
ProbeStay = 0,
ProbeDeploy = BIT(0),
ProbeStow = BIT(1),
ProbeDeploy = _BV(0),
ProbeStow = _BV(1),
ProbeDeployAndStow = (ProbeDeploy | ProbeStow)
};
......@@ -1499,8 +1498,8 @@ static void clean_up_after_endstop_move() {
destination[axis] = current_position[axis];
feedrate = 0.0;
endstops_hit_on_purpose(); // clear endstop hit flags
BITSET(axis_was_homed, axis);
BITSET(axis_known_position, axis);
SBI(axis_was_homed, axis);
SBI(axis_known_position, axis);
#if ENABLED(Z_PROBE_SLED)
// bring probe back
......@@ -1606,8 +1605,8 @@ static void clean_up_after_endstop_move() {
destination[axis] = current_position[axis];
feedrate = 0.0;
endstops_hit_on_purpose(); // clear endstop hit flags
BITSET(axis_was_homed, axis);
BITSET(axis_known_position, axis);
SBI(axis_was_homed, axis);
SBI(axis_known_position, axis);
}
}
#define HOMEAXIS(LETTER) homeaxis(LETTER##_AXIS)
......@@ -2680,7 +2679,7 @@ static void clean_up_after_endstop_move() {
static void dock_sled(bool dock, int offset=0) {
if (debugLevel & DEBUG_INFO) ECHO_LMV(INFO, "dock_sled", dock);
if (axis_known_position & (BIT(X_AXIS)|BIT(Y_AXIS)) != (BIT(X_AXIS)|BIT(Y_AXIS))) {
if (axis_known_position & (_BV(X_AXIS)|_BV(Y_AXIS)) != (_BV(X_AXIS)|_BV(Y_AXIS))) {
LCD_MESSAGEPGM(MSG_POSITION_UNKNOWN);
ECHO_LM(DB, MSG_POSITION_UNKNOWN);
return;
......@@ -2761,33 +2760,32 @@ static void clean_up_after_endstop_move() {
#endif
inline void wait_heater() {
millis_t temp_ms = millis();
/* See if we are heating up or cooling down */
target_direction = isHeatingHotend(target_extruder); // true if heating, false if cooling
cancel_heatup = false;
// Exit if the temperature is above target and not waiting for cooling
if (no_wait_for_cooling && !isHeatingHotend(target_extruder)) return;
#if ENABLED(TEMP_RESIDENCY_TIME)
long residency_start_ms = -1;
/* continue to loop until we have reached the target temp
_and_ until TEMP_RESIDENCY_TIME hasn't passed since we reached it */
while((!cancel_heatup)&&((residency_start_ms == -1) ||
(residency_start_ms >= 0 && (((millis_t) (millis() - residency_start_ms)) < (TEMP_RESIDENCY_TIME * 1000UL)))) )
// Loop until the temperature has stabilized
#define TEMP_CONDITIONS (residency_start_ms < 0 || now < residency_start_ms + TEMP_RESIDENCY_TIME * 1000UL)
#else
while ( target_direction ? (isHeatingHotend(target_extruder)) : (isCoolingHotend(target_extruder)&&(no_wait_for_cooling==false)) )
// Loop until the temperature is exactly on target
#define TEMP_CONDITIONS (degHotend(target_extruder) != degTargetHotend(target_extruder))
#endif // TEMP_RESIDENCY_TIME
{ // while loop
if (millis() > temp_ms + 1000UL) { //Print temp & remaining time every 1s while waiting
cancel_heatup = false;
millis_t now = millis(), next_temp_ms = now + 1000UL;
while (!cancel_heatup && TEMP_CONDITIONS) {
now = millis();
if (now > next_temp_ms) { // Print temp & remaining time every 1s while waiting
next_temp_ms = now + 1000UL;
#if HAS(TEMP_0) || HAS(TEMP_BED) || ENABLED(HEATER_0_USES_MAX6675)
print_heaterstates();
#endif
#if ENABLED(TEMP_RESIDENCY_TIME)
ECHO_M(" " SERIAL_W);
if (residency_start_ms > -1) {
temp_ms = ((TEMP_RESIDENCY_TIME * 1000UL) - (millis() - residency_start_ms)) / 1000UL;
ECHO_EV(temp_ms);
if (residency_start_ms >= 0) {
long rem = ((TEMP_RESIDENCY_TIME * 1000UL) - (now - residency_start_ms)) / 1000UL;
ECHO_EV(rem);
}
else {
ECHO_EM("?");
......@@ -2795,22 +2793,17 @@ inline void wait_heater() {
#else
ECHO_E;
#endif
temp_ms = millis();
}
idle();
#if ENABLED(TEMP_RESIDENCY_TIME)
// start/restart the TEMP_RESIDENCY_TIME timer whenever we reach target temp for the first time
// or when current temp falls outside the hysteresis after target temp was reached
if ((residency_start_ms == -1 && target_direction && (degHotend(target_extruder) >= (degTargetHotend(target_extruder)-TEMP_WINDOW))) ||
(residency_start_ms == -1 && !target_direction && (degHotend(target_extruder) <= (degTargetHotend(target_extruder)+TEMP_WINDOW))) ||
(residency_start_ms > -1 && labs(degHotend(target_extruder) - degTargetHotend(target_extruder)) > TEMP_HYSTERESIS) )
{
// Start the TEMP_RESIDENCY_TIME timer when we reach target temp for the first time.
// Restart the timer whenever the temperature falls outside the hysteresis.
if (labs(degHotend(target_extruder) - degTargetHotend(target_extruder)) > ((residency_start_ms < 0) ? TEMP_WINDOW : TEMP_HYSTERESIS))
residency_start_ms = millis();
}
#endif // TEMP_RESIDENCY_TIME
}
} // while(!cancel_heatup && TEMP_CONDITIONS)
LCD_MESSAGEPGM(MSG_HEATING_COMPLETE);
refresh_cmd_timeout();
......@@ -2818,19 +2811,17 @@ inline void wait_heater() {
}
inline void wait_bed() {
millis_t temp_ms = millis();
// Exit if the temperature is above target and not waiting for cooling
if (no_wait_for_cooling && !isHeatingBed()) return;
cancel_heatup = false;
target_direction = isHeatingBed(); // true if heating, false if cooling
while ((target_direction && !cancel_heatup) ? isHeatingBed() : isCoolingBed() && !no_wait_for_cooling) {
millis_t ms = millis();
if (ms > temp_ms + 1000UL) { //Print Temp Reading every 1 second while heating up.
temp_ms = ms;
#if HAS(TEMP_0) || HAS(TEMP_BED) || ENABLED(HEATER_0_USES_MAX6675)
millis_t now = millis(), next_temp_ms = now + 1000UL;
while (!cancel_heatup && degTargetBed() != degBed()) {
millis_t now = millis();
if (now > next_temp_ms) { // Print Temp Reading every 1 second while heating up.
next_temp_ms = now + 1000UL;
print_heaterstates();
ECHO_E;
#endif
}
idle();
}
......@@ -3336,7 +3327,7 @@ inline void gcode_G28() {
else if (homeZ) { // Don't need to Home Z twice
// Let's see if X and Y are homed
if (axis_was_homed & (BIT(X_AXIS)|BIT(Y_AXIS)) == (BIT(X_AXIS)|BIT(Y_AXIS))) {
if (axis_was_homed & (_BV(X_AXIS)|_BV(Y_AXIS)) == (_BV(X_AXIS)|_BV(Y_AXIS))) {
// Make sure the probe is within the physical limits
// NOTE: This doesn't necessarily ensure the probe is also within the bed!
......@@ -3380,7 +3371,7 @@ inline void gcode_G28() {
if (home_all_axis || homeZ) {
// Let's see if X and Y are homed
if (axis_was_homed & (BIT(X_AXIS)|BIT(Y_AXIS)) == (BIT(X_AXIS)|BIT(Y_AXIS))) {
if (axis_was_homed & (_BV(X_AXIS)|_BV(Y_AXIS)) == (_BV(X_AXIS)|_BV(Y_AXIS))) {
current_position[Z_AXIS] = 0;
sync_plan_position();
......@@ -3505,7 +3496,7 @@ inline void gcode_G28() {
if (debugLevel & DEBUG_INFO) ECHO_LM(INFO, "gcode_G29 >>>");
// Don't allow auto-leveling without homing first
if (axis_known_position & (BIT(X_AXIS)|BIT(Y_AXIS)) != (BIT(X_AXIS)|BIT(Y_AXIS))) {
if (axis_known_position & (_BV(X_AXIS)|_BV(Y_AXIS)) != (_BV(X_AXIS)|_BV(Y_AXIS))) {
LCD_MESSAGEPGM(MSG_POSITION_UNKNOWN);
ECHO_LM(ER, MSG_POSITION_UNKNOWN);
return;
......@@ -5116,7 +5107,8 @@ inline void gcode_M105() {
#endif // HAS(FAN)
/**
* M109: Wait for extruder(s) to reach temperature
* M109: Sxxx Wait for extruder(s) to reach temperature. Waits only when heating.
* Rxxx Wait for extruder(s) to reach temperature. Waits when heating and cooling.
*/
inline void gcode_M109() {
if (setTargetedExtruder(109)) return;
......@@ -6238,7 +6230,7 @@ inline void gcode_M400() { st_synchronize(); }
ECHO_M("\",\"coords\": {");
ECHO_M("\"axesHomed\":[");
if (axis_was_homed & (BIT(X_AXIS)|BIT(Y_AXIS)|BIT(Z_AXIS)) == (BIT(X_AXIS)|BIT(Y_AXIS)|BIT(Z_AXIS)))
if (axis_was_homed & (_BV(X_AXIS)|_BV(Y_AXIS)|_BV(Z_AXIS)) == (_BV(X_AXIS)|_BV(Y_AXIS)|_BV(Z_AXIS)))
ECHO_M("1, 1, 1");
else
ECHO_M("0, 0, 0");
......
MK/module/MK_Main.h
View file @ b3267d28
......@@ -60,12 +60,12 @@ void Stop();
* Debug flags - with repetier
*/
enum DebugFlags {
DEBUG_ECHO = BIT(0),
DEBUG_INFO = BIT(1),
DEBUG_ERRORS = BIT(2),
DEBUG_DRYRUN = BIT(3),
DEBUG_COMMUNICATION = BIT(4),
DEBUG_DEBUG = BIT(5)
DEBUG_ECHO = _BV(0),
DEBUG_INFO = _BV(1),
DEBUG_ERRORS = _BV(2),
DEBUG_DRYRUN = _BV(3),
DEBUG_COMMUNICATION = _BV(4),
DEBUG_DEBUG = _BV(5)
};
void clamp_to_software_endstops(float target[3]);
......
MK/module/boards/BOARD_3DRAG.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 77
* 3DRAG
****************************************************************************************/
#define KNOWN_BOARD
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
#endif
#define LARGE_FLASH true
#define ORIG_X_STEP_PIN 54
#define ORIG_X_DIR_PIN 55
#define ORIG_X_ENABLE_PIN 38
#define ORIG_X_MIN_PIN 3
#define ORIG_X_MAX_PIN 2
#define ORIG_Y_STEP_PIN 60
#define ORIG_Y_DIR_PIN 61
#define ORIG_Y_ENABLE_PIN 56
#define ORIG_Y_MIN_PIN 14
#define ORIG_Y_MAX_PIN 15
#define ORIG_Z_STEP_PIN 46
#define ORIG_Z_DIR_PIN 48
#define ORIG_Z_ENABLE_PIN 63
#define ORIG_Z_MIN_PIN 18
#define ORIG_Z_MAX_PIN -1
#define Y2_STEP_PIN 36
#define Y2_DIR_PIN 34
#define Y2_ENABLE_PIN 30
#define Z2_STEP_PIN 36
#define Z2_DIR_PIN 34
#define Z2_ENABLE_PIN 30
#define ORIG_E0_STEP_PIN 26
#define ORIG_E0_DIR_PIN 28
#define ORIG_E0_ENABLE_PIN 24
#define ORIG_E1_STEP_PIN 36
#define ORIG_E1_DIR_PIN 34
#define ORIG_E1_ENABLE_PIN 30
#define SDPOWER -1
#define SDSS 25
#define LED_PIN 13
#define ORIG_FAN_PIN 8 // IO pin. Buffer needed
#define ORIG_PS_ON_PIN 12
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) || ENABLED(G3D_PANEL)
#define KILL_PIN 41
#else
#define KILL_PIN -1
#endif
#define ORIG_HEATER_0_PIN 10 // HOTEND 1
#define ORIG_HEATER_1_PIN 12 // HOTEND 2
#define ORIG_HEATER_2_PIN 6 // HOTEND 3
#define ORIG_HEATER_3_PIN -1
#define ORIG_TEMP_0_PIN 13 // ANALOG NUMBERING
#define ORIG_TEMP_1_PIN 15 // ANALOG NUMBERING
#define ORIG_TEMP_2_PIN -1 // ANALOG NUMBERING
#define ORIG_HEATER_BED_PIN 9 // NO BED
#define ORIG_TEMP_BED_PIN 14 // ANALOG NUMBERING
#if NUM_SERVOS > 0
#define SERVO0_PIN 11
#if NUM_SERVOS > 1
#define SERVO1_PIN 6
#if NUM_SERVOS > 2
#define SERVO2_PIN 5
#if NUM_SERVOS > 3
#define SERVO3_PIN 4
#endif
#endif
#endif
#endif
#define ORIG_BEEPER_PIN 33
#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
#define ORIG_BEEPER_PIN -1
#define LCD_PINS_RS 27
#define LCD_PINS_ENABLE 29
#define LCD_PINS_D4 37
#define LCD_PINS_D5 35
#define LCD_PINS_D6 33
#define LCD_PINS_D7 31
// Buttons
#define BTN_EN1 16
#define BTN_EN2 17
#define BTN_ENC 23 //the click
#endif // ULTRA_LCD && NEWPANEL
// SPI for Max6675 Thermocouple
#define MAX6675_SS 66 // Do not use pin 53 if there is even the remote possibility of using Display/SD card
MK/module/boards/BOARD_5DPRINT.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 88
* 5DPrint D8 Driver board
* https://bitbucket.org/makible/5dprint-d8-controller-board
****************************************************************************************/
#define KNOWN_BOARD
#define AT90USB 1286 // Disable MarlinSerial etc.
#ifndef __AVR_AT90USB1286__
#error Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu.
#endif
#define LARGE_FLASH true
#define ORIG_X_STEP_PIN 0
#define ORIG_X_DIR_PIN 1
#define ORIG_X_ENABLE_PIN 23
#define X_STOP_PIN 37
#define ORIG_Y_STEP_PIN 2
#define ORIG_Y_DIR_PIN 3
#define ORIG_Y_ENABLE_PIN 19
#define Y_STOP_PIN 36
#define ORIG_Z_STEP_PIN 4
#define ORIG_Z_DIR_PIN 5
#define ORIG_Z_ENABLE_PIN 18
#define Z_STOP_PIN 39
#define ORIG_E0_STEP_PIN 6
#define ORIG_E0_DIR_PIN 7
#define ORIG_E0_ENABLE_PIN 17
#define ORIG_HEATER_0_PIN 21 // Extruder
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_HEATER_BED_PIN 20 // Bed
// You may need to change ORIG_FAN_PIN to 16 because Marlin isn't using fastio.h
// for the fan and Teensyduino uses a different pin mapping.
#define ORIG_FAN_PIN 16 // Fan
#define ORIG_TEMP_0_PIN 1 // Extruder / Analog pin numbering
#define ORIG_TEMP_BED_PIN 0 // Bed / Analog pin numbering
#define ORIG_TEMP_1_PIN -1
#define ORIG_TEMP_2_PIN -1
#define SDPOWER -1
#define LED_PIN -1
#define ORIG_PS_ON_PIN -1
#define KILL_PIN -1
#define ALARM_PIN -1
// The SDSS pin uses a different pin mapping from file Sd2PinMap.h
#define SDSS 20
// Microstepping pins
// Note that the pin mapping is not from fastio.h
// See Sd2PinMap.h for the pin configurations
#define X_MS1_PIN 25
#define X_MS2_PIN 26
#define Y_MS1_PIN 9
#define Y_MS2_PIN 8
#define Z_MS1_PIN 7
#define Z_MS2_PIN 6
#define E0_MS1_PIN 5
#define E0_MS2_PIN 4
MK/module/boards/BOARD_99.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 99
* Custom board
****************************************************************************************/
#define KNOWN_BOARD 1
#define ORIG_X_STEP_PIN 2
#define ORIG_X_DIR_PIN 3
#define ORIG_X_ENABLE_PIN -1
#define X_STOP_PIN 16
#define ORIG_Y_STEP_PIN 5
#define ORIG_Y_DIR_PIN 6
#define ORIG_Y_ENABLE_PIN -1
#define Y_STOP_PIN 67
#define ORIG_Z_STEP_PIN 62
#define ORIG_Z_DIR_PIN 63
#define ORIG_Z_ENABLE_PIN -1
#define Z_STOP_PIN 59
#define ORIG_E0_STEP_PIN 65
#define ORIG_E0_DIR_PIN 66
#define ORIG_E0_ENABLE_PIN -1
#define SDPOWER -1
#define SDSS 53
#define LED_PIN -1
#define ORIG_FAN_PIN -1
#define ORIG_PS_ON_PIN 9
#define KILL_PIN -1
#define ORIG_HEATER_0_PIN 13
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_TEMP_0_PIN 6 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define ORIG_TEMP_1_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define ORIG_TEMP_2_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define ORIG_HEATER_BED_PIN 4
#define ORIG_TEMP_BED_PIN 10
MK/module/boards/BOARD_ALLIGATOR.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 502
* Alligator R2
* http://www.3dartists.org/
****************************************************************************************/
#define KNOWN_BOARD
#ifndef __SAM3X8E__
#error Oops! Make sure you have 'Alligator 3D Printer Board' selected from the 'Tools -> Boards' menu.
#endif
#define ALLIGATOR
#define SPI_CHAN_DAC 1
// X AXIS
#define ORIG_X_STEP_PIN 96 // PB24
#define ORIG_X_DIR_PIN 2 // PB25
#define ORIG_X_ENABLE_PIN 24 // PA15, motor RESET pin
#define ORIG_X_MIN_PIN 33 // PC1
#define ORIG_X_MAX_PIN 34 // PC2
#define X_MS1_PIN 99 // PC10
// Y AXIS
#define ORIG_Y_STEP_PIN 94 // PB22
#define ORIG_Y_DIR_PIN 95 // PB23
#define ORIG_Y_ENABLE_PIN 24 // PA15, motor RESET pin
#define ORIG_Y_MIN_PIN 35 // PC3
#define ORIG_Y_MAX_PIN 37 // PC5
#define Y_MS1_PIN 10 // PC29
// Z AXIS
#define ORIG_Z_STEP_PIN 98 // PC27
#define ORIG_Z_DIR_PIN 3 // PC28
#define ORIG_Z_ENABLE_PIN 24 // PA15, motor RESET pin
#define ORIG_Z_MIN_PIN 38 // PC6
#define ORIG_Z_MAX_PIN 39 // PC7
#define Z_MS1_PIN 44 // PC19
// E0 AXIS
#define ORIG_E0_STEP_PIN 5 // PC25
#define ORIG_E0_DIR_PIN 4 // PC26
#define ORIG_E0_ENABLE_PIN 24 // PA15, motor RESET pin
#define E0_MS1_PIN 45 // PC18
// E1 AXIS
#define ORIG_E1_STEP_PIN 28 // PD3 on piggy
#define ORIG_E1_DIR_PIN 27 // PD2 on piggy
#define ORIG_E1_ENABLE_PIN 24 // PA15, motor RESET pin
// E2 AXIS
#define ORIG_E2_STEP_PIN 11 // PD7 on piggy
#define ORIG_E2_DIR_PIN 29 // PD6 on piggy
#define ORIG_E2_ENABLE_PIN 24 // PA15, motor RESET pin
// E3 AXIS
#define ORIG_E3_STEP_PIN 30 // PD9 on piggy
#define ORIG_E3_DIR_PIN 12 // PD8 on piggy
#define ORIG_E3_ENABLE_PIN 24 // PA15, motor RESET pin
#define MOTOR_FAULT_PIN 22 // PB26 , motor X-Y-Z-E0 motor FAULT
#define SDPOWER -1
#define SDSS 77 // PA28
#define SD_DETECT_PIN 87 // PA29
#define LED_PIN -1
#define ORIG_FAN_PIN 92 // PA5
#define ORIG_FAN2_PIN 31 // PA7
#define ORIG_PS_ON_PIN -1
#define KILL_PIN -1
#define SUICIDE_PIN -1 //PIN that has to be turned on right after start, to keep power flowing.
// Note that on the Due pin A0 on the board is channel 2 on the ARM chip
#define ORIG_HEATER_BED_PIN 69 // PA0
#define ORIG_HEATER_0_PIN 68 // PA1
#define ORIG_HEATER_1_PIN 8 // PC22 on piggy
#define ORIG_HEATER_2_PIN 9 // PC21 on piggy
#define ORIG_HEATER_3_PIN 97 // PC20 on piggy
#define ORIG_TEMP_BED_PIN 0 // PA16
#define ORIG_TEMP_0_PIN 1 // PA24, analog pin
#define ORIG_TEMP_1_PIN 2 // PA23 analog pin on piggy
#define ORIG_TEMP_2_PIN 3 // PA22, analog pin on piggy
#define ORIG_TEMP_3_PIN 4 // PA6, analog on piggy
#define LED_PWM1_PIN 40 // PC8
#define LED_PWM2_PIN 41 // PC9
#define LED_PWM3_PIN 36 // PC4
#define EXP_VOLTAGE_LEVEL_PIN 65
#define DAC0_SYNC 53 // PB14
#define DAC1_SYNC 6 // PC24
//64K SPI EEPROM
#define SPI_CHAN_EEPROM1 2
#define SPI_EEPROM1_CS 25 // PD0
//2K SPI EEPROM
#define SPI_EEPROM2_CS 26 // PD1
//** FLASH SPI**/
//32Mb
#define SPI_FLASH_CS 23 //PA14
/** Display **/
// GLCD on expansion port
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define LCD_PINS_RS 18
#define LCD_PINS_ENABLE 15
#define LCD_PINS_D4 19
#define ORIG_BEEPER_PIN 64
#define BTN_EN1 14
#define BTN_EN2 16
#define BTN_ENC 17
#if UI_VOLTAGE_LEVEL != 1
#undef UI_VOLTAGE_LEVEL
#define UI_VOLTAGE_LEVEL 1
#endif
#endif //REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
#if NUM_SERVOS > 0
#define SERVO0_PIN 36
#if NUM_SERVOS > 1
#define SERVO1_PIN 40
#if NUM_SERVOS > 2
#define SERVO2_PIN 41
#if NUM_SERVOS > 3
#define SERVO3_PIN -1
#endif
#endif
#endif
#endif
MK/module/boards/BOARD_AZTEEG_X3.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 67
* AZTEEG X3
****************************************************************************************/
#define KNOWN_BOARD 1
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
#endif
#define LARGE_FLASH true
#define ORIG_X_STEP_PIN 54
#define ORIG_X_DIR_PIN 55
#define ORIG_X_ENABLE_PIN 38
#define ORIG_X_MIN_PIN 3
#define ORIG_X_MAX_PIN 2
#define ORIG_Y_STEP_PIN 60
#define ORIG_Y_DIR_PIN 61
#define ORIG_Y_ENABLE_PIN 56
#define ORIG_Y_MIN_PIN 14
#define ORIG_Y_MAX_PIN 15
#define ORIG_Z_STEP_PIN 46
#define ORIG_Z_DIR_PIN 48
#define ORIG_Z_ENABLE_PIN 62
#define ORIG_Z_MIN_PIN 18
#define ORIG_Z_MAX_PIN 19
#define Y2_STEP_PIN 36
#define Y2_DIR_PIN 34
#define Y2_ENABLE_PIN 30
#define Z2_STEP_PIN 36
#define Z2_DIR_PIN 34
#define Z2_ENABLE_PIN 30
#define ORIG_E0_STEP_PIN 26
#define ORIG_E0_DIR_PIN 28
#define ORIG_E0_ENABLE_PIN 24
#define ORIG_E1_STEP_PIN 36
#define ORIG_E1_DIR_PIN 34
#define ORIG_E1_ENABLE_PIN 30
#define SDPOWER -1
#define SDSS 53
#define LED_PIN 13
#define ORIG_FAN_PIN 9
#define ORIG_PS_ON_PIN 12
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) || ENABLED(G3D_PANEL)
#define KILL_PIN 41
#else
#define KILL_PIN -1
#endif
#define ORIG_HEATER_0_PIN 10 // HOTEND 1
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_HEATER_3_PIN -1
#define ORIG_TEMP_0_PIN 13 // ANALOG NUMBERING
#define ORIG_TEMP_1_PIN 15 // ANALOG NUMBERING
#define ORIG_TEMP_2_PIN -1 // ANALOG NUMBERING
#define ORIG_HEATER_BED_PIN 8 // BED
#define ORIG_TEMP_BED_PIN 14 // ANALOG NUMBERING
#if NUM_SERVOS > 0
#define SERVO0_PIN 11
#endif
#if NUM_SERVOS > 0
#define SERVO0_PIN 11
#if NUM_SERVOS > 1
#define SERVO1_PIN 6
#if NUM_SERVOS > 2
#define SERVO2_PIN 5
#if NUM_SERVOS > 3
#define SERVO3_PIN 4
#endif
#endif
#endif
#endif
#if ENABLED(TEMP_STAT_LEDS)
#define STAT_LED_RED 6
#define STAT_LED_BLUE 11
#endif
#if ENABLED(ULTRA_LCD)
#if ENABLED(NEWPANEL)
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#define ORIG_BEEPER_PIN 37
#define BTN_EN1 31
#define BTN_EN2 33
#define BTN_ENC 35
#define SD_DETECT_PIN 49
#elif ENABLED(LCD_I2C_PANELOLU2)
#define BTN_EN1 47 //reverse if the encoder turns the wrong way.
#define BTN_EN2 43
#define BTN_ENC 32
#define LCD_SDSS 53
#define SD_DETECT_PIN -1
#define KILL_PIN 41
#elif ENABLED(LCD_I2C_VIKI)
#define BTN_EN1 22 //reverse if the encoder turns the wrong way.
#define BTN_EN2 7
#define BTN_ENC -1
#define LCD_SDSS 53
#define SD_DETECT_PIN 49
#else
//arduino pin which triggers an piezzo beeper
#define ORIG_BEEPER_PIN 33 // Beeper on AUX-4
//buttons are directly attached using AUX-2
#if ENABLED(REPRAPWORLD_KEYPAD)
#define BTN_EN1 64 // encoder
#define BTN_EN2 59 // encoder
#define BTN_ENC 63 // enter button
#define SHIFT_OUT 40 // shift register
#define SHIFT_CLK 44 // shift register
#define SHIFT_LD 42 // shift register
#else
#define BTN_EN1 37
#define BTN_EN2 35
#define BTN_ENC 31 //the click
#endif
#if ENABLED(G3D_PANEL)
#define SD_DETECT_PIN 49
#else
#define SD_DETECT_PIN -1 // Ramps does not use this port
#endif
#endif
#else //old style panel with shift register
//arduino pin witch triggers an piezzo beeper
#define ORIG_BEEPER_PIN 33 //No Beeper added
//buttons are attached to a shift register
// Not wired this yet
//#define SHIFT_CLK 38
//#define SHIFT_LD 42
//#define SHIFT_OUT 40
//#define SHIFT_EN 17
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#endif
#endif //ULTRA_LCD
// SPI for Max6675 Thermocouple
#define MAX6675_SS 66 // Do not use pin 53 if there is even the remote possibility of using Display/SD card
MK/module/boards/BOARD_AZTEEG_X3_PRO.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 68
* AZTEEG X3 PRO
****************************************************************************************/
#define KNOWN_BOARD 1
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
#endif
#define LARGE_FLASH true
#define LARGE_FLASH true
#define ORIG_X_STEP_PIN 54
#define ORIG_X_DIR_PIN 55
#define ORIG_X_ENABLE_PIN 38
#define ORIG_X_MIN_PIN 3
#define ORIG_X_MAX_PIN 2
#define ORIG_Y_STEP_PIN 60
#define ORIG_Y_DIR_PIN 61
#define ORIG_Y_ENABLE_PIN 56
#define ORIG_Y_MIN_PIN 14
#define ORIG_Y_MAX_PIN 15
#define ORIG_Z_STEP_PIN 46
#define ORIG_Z_DIR_PIN 48
#define ORIG_Z_ENABLE_PIN 62
#define ORIG_Z_MIN_PIN 18
#define ORIG_Z_MAX_PIN 19
#define Y2_STEP_PIN 36
#define Y2_DIR_PIN 34
#define Y2_ENABLE_PIN 30
#define Z2_STEP_PIN 36
#define Z2_DIR_PIN 34
#define Z2_ENABLE_PIN 30
#define ORIG_E0_STEP_PIN 26
#define ORIG_E0_DIR_PIN 28
#define ORIG_E0_ENABLE_PIN 24
#define ORIG_E1_STEP_PIN 36
#define ORIG_E1_DIR_PIN 34
#define ORIG_E1_ENABLE_PIN 30
#define ORIG_E2_STEP_PIN 23
#define ORIG_E2_DIR_PIN 25
#define ORIG_E2_ENABLE_PIN 40
#define ORIG_E3_STEP_PIN 27
#define ORIG_E3_DIR_PIN 29
#define ORIG_E3_ENABLE_PIN 41
#define SDPOWER -1
#define SDSS 53
#define LED_PIN 13
#define ORIG_FAN_PIN 6
#define ORIG_BEEPER_PIN 33
#define ORIG_PS_ON_PIN 12
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) || ENABLED(G3D_PANEL)
#define KILL_PIN 41
#else
#define KILL_PIN -1
#endif
#define ORIG_HEATER_0_PIN 10 // HOTEND 1
#define ORIG_HEATER_1_PIN 9 // HOTEND 2
#define ORIG_HEATER_2_PIN 16 // HOTEND 3
#define ORIG_HEATER_3_PIN 17 // HOTEND 4
#define ORIG_TEMP_0_PIN 13 // ANALOG NUMBERING
#define ORIG_TEMP_1_PIN 15 // ANALOG NUMBERING
#define ORIG_TEMP_2_PIN 12 // ANALOG NUMBERING
#define ORIG_TEMP_3_PIN 11 // ANALOG NUMBERING
#define TC1 4 // ANALOG NUMBERING Thermo couple on Azteeg X3Pro
#define TC2 5 // ANALOG NUMBERING Thermo couple on Azteeg X3Pro
#define ORIG_HEATER_BED_PIN 8 // BED
#define ORIG_TEMP_BED_PIN 14 // ANALOG NUMBERING
#if NUM_SERVOS > 0
#define SERVO0_PIN 47
#if NUM_SERVOS > 1
#define SERVO1_PIN -1
#if NUM_SERVOS > 2
#define SERVO2_PIN -1
#if NUM_SERVOS > 3
#define SERVO3_PIN -1
#endif
#endif
#endif
#endif
#if ENABLED(TEMP_STAT_LEDS)
#define STAT_LED_RED 32
#define STAT_LED_BLUE 35
#endif
#if ENABLED(ULTRA_LCD)
#if ENABLED(NEWPANEL)
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#define ORIG_BEEPER_PIN 37
#define BTN_EN1 31
#define BTN_EN2 33
#define BTN_ENC 35
#define SD_DETECT_PIN 49
#elif ENABLED(LCD_I2C_PANELOLU2)
#define BTN_EN1 47 //reverse if the encoder turns the wrong way.
#define BTN_EN2 43
#define BTN_ENC 32
#define LCD_SDSS 53
#define SD_DETECT_PIN -1
#define KILL_PIN 41
#elif ENABLED(LCD_I2C_VIKI)
#define BTN_EN1 22 //reverse if the encoder turns the wrong way.
#define BTN_EN2 7
#define BTN_ENC -1
#define LCD_SDSS 53
#define SD_DETECT_PIN 49
#else
//arduino pin which triggers an piezzo beeper
#define ORIG_BEEPER_PIN 33 // Beeper on AUX-4
//buttons are directly attached using AUX-2
#if ENABLED(REPRAPWORLD_KEYPAD)
#define BTN_EN1 64 // encoder
#define BTN_EN2 59 // encoder
#define BTN_ENC 63 // enter button
#define SHIFT_OUT 40 // shift register
#define SHIFT_CLK 44 // shift register
#define SHIFT_LD 42 // shift register
#else
#define BTN_EN1 37
#define BTN_EN2 35
#define BTN_ENC 31 //the click
#endif
#if ENABLED(G3D_PANEL)
#define SD_DETECT_PIN 49
#else
#define SD_DETECT_PIN -1 // Ramps does not use this port
#endif
#endif
#else //old style panel with shift register
//arduino pin witch triggers an piezzo beeper
#define ORIG_BEEPER_PIN 33 //No Beeper added
//buttons are attached to a shift register
// Not wired this yet
//#define SHIFT_CLK 38
//#define SHIFT_LD 42
//#define SHIFT_OUT 40
//#define SHIFT_EN 17
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#endif
#endif //ULTRA_LCD
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
#define ORIG_BEEPER_PIN 33
// Pins for DOGM SPI LCD Support
#define DOGLCD_A0 44
#define DOGLCD_CS 45
#define LCD_SCREEN_ROT_180
//The encoder and click button
#define BTN_EN1 22
#define BTN_EN2 7
#define BTN_ENC 39 // the click switch
#define SDSS 53
#define SD_DETECT_PIN 49
#define KILL_PIN 31
#endif
#define MAX6675_SS 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
MK/module/boards/BOARD_BRAINWAVE.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 82
* Brainwave 1.0 pin assignments (AT90USB646)
* Requires hardware bundle for Arduino:
* https://github.com/unrepentantgeek/brainwave-arduino
****************************************************************************************/
#define KNOWN_BOARD 1
#define AT90USB 646 // Disable MarlinSerial etc.
#ifndef __AVR_AT90USB646__
#error Oops! Make sure you have 'Brainwave' selected from the 'Tools -> Boards' menu.
#endif
#define ORIG_X_STEP_PIN 27
#define ORIG_X_DIR_PIN 29
#define ORIG_X_ENABLE_PIN 28
#define X_STOP_PIN 7
#define X_ATT_PIN 26
#define ORIG_Y_STEP_PIN 31
#define ORIG_Y_DIR_PIN 33
#define ORIG_Y_ENABLE_PIN 32
#define Y_STOP_PIN 6
#define Y_ATT_PIN 30
#define ORIG_Z_STEP_PIN 17
#define ORIG_Z_DIR_PIN 19
#define ORIG_Z_ENABLE_PIN 18
#define Z_STOP_PIN 5
#define Z_ATT_PIN 16
#define ORIG_E0_STEP_PIN 21
#define ORIG_E0_DIR_PIN 23
#define ORIG_E0_ENABLE_PIN 22
#define E0_ATT_PIN 20
#define ORIG_HEATER_0_PIN 4 // Extruder
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_HEATER_BED_PIN 38 // Bed
#define ORIG_FAN_PIN 3 // Fan
#define ORIG_TEMP_0_PIN 7 // Extruder / Analog pin numbering
#define ORIG_TEMP_1_PIN -1
#define ORIG_TEMP_2_PIN -1
#define ORIG_TEMP_BED_PIN 6 // Bed / Analog pin numbering
#define SDPOWER -1
#define SDSS -1
#define LED_PIN 39
#define ORIG_PS_ON_PIN -1
#define KILL_PIN -1
#define ALARM_PIN -1
MK/module/boards/BOARD_CHEAPTRONIC.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 2
* Cheaptronic v1.0
****************************************************************************************/
#define KNOWN_BOARD 1
#ifndef __AVR_ATmega2560__
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
#endif
#define LARGE_FLASH true
//X motor stepper
#define ORIG_X_STEP_PIN 14
#define ORIG_X_DIR_PIN 15
#define ORIG_X_ENABLE_PIN 24
//X endstop
#define ORIG_X_MIN_PIN 3
#define ORIG_X_MAX_PIN -1
//Y motor stepper
#define ORIG_Y_STEP_PIN 35
#define ORIG_Y_DIR_PIN 36
#define ORIG_Y_ENABLE_PIN 31
//Y endstop
#define ORIG_Y_MIN_PIN 2
#define ORIG_Y_MAX_PIN -1
//Z motor stepper
#define ORIG_Z_STEP_PIN 40
#define ORIG_Z_DIR_PIN 41
#define ORIG_Z_ENABLE_PIN 37
//Z endstop
#define ORIG_Z_MIN_PIN 5
#define ORIG_Z_MAX_PIN -1
//Extruder 0 stepper
#define ORIG_E0_STEP_PIN 26
#define ORIG_E0_DIR_PIN 28
#define ORIG_E0_ENABLE_PIN 25
//Extruder 1 stepper
#define ORIG_E1_STEP_PIN 33
#define ORIG_E1_DIR_PIN 34
#define ORIG_E1_ENABLE_PIN 30
#define SDPOWER -1
#define SDSS -1
#define LED_PIN -1
//FAN
#define ORIG_FAN_PIN -1
#define ORIG_PS_ON_PIN -1
#define KILL_PIN -1
#define ORIG_HEATER_0_PIN 19 // EXTRUDER 1
#define ORIG_HEATER_1_PIN 23 // EXTRUDER 2
//HeatedBad
#define ORIG_HEATER_BED_PIN 22
//Cheaptronic v1.0 hasent EXTRUDER 3
#define ORIG_HEATER_2_PIN -1
//Temperature sensors
#define ORIG_TEMP_0_PIN 15
#define ORIG_TEMP_1_PIN 14
#define ORIG_TEMP_2_PIN -1
#define ORIG_TEMP_BED_PIN 13
//Cheaptronic v1.0 dont support LCD
#define LCD_PINS_RS -1
#define LCD_PINS_ENABLE -1
#define LCD_PINS_D4 -1
#define LCD_PINS_D5 -1
#define LCD_PINS_D6 -1
#define LCD_PINS_D7 -1
//Cheaptronic v1.0 dont support keypad
#define BTN_EN1 -1
#define BTN_EN2 -1
#define BTN_ENC -1
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0
//Cheaptronic v1.0 does not use this port
#define SD_DETECT_PIN -1
MK/module/boards/BOARD_DUEMILANOVE_328P.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 4
* Duemilanove w/ ATMega328P
****************************************************************************************/
#define KNOWN_BOARD 1
#ifndef __AVR_ATmega328P__
#error Oops! Make sure you have 'Arduino Duemilanove w/ ATMega328' selected from the 'Tools -> Boards' menu.
#endif
#define ORIG_X_STEP_PIN 19
#define ORIG_X_DIR_PIN 18
#define ORIG_X_ENABLE_PIN -1
#define X_STOP_PIN 17
#define ORIG_Y_STEP_PIN 10
#define ORIG_Y_DIR_PIN 7
#define ORIG_Y_ENABLE_PIN -1
#define Y_STOP_PIN 8
#define ORIG_Z_STEP_PIN 13
#define ORIG_Z_DIR_PIN 3
#define ORIG_Z_ENABLE_PIN 2
#define Z_STOP_PIN 4
#define ORIG_E0_STEP_PIN 11
#define ORIG_E0_DIR_PIN 12
#define ORIG_E0_ENABLE_PIN -1
#define SDPOWER -1
#define SDSS -1
#define LED_PIN -1
#define ORIG_FAN_PIN 5
#define ORIG_PS_ON_PIN -1
#define KILL_PIN -1
#define ORIG_HEATER_0_PIN 6
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define ORIG_TEMP_1_PIN -1
#define ORIG_TEMP_2_PIN -1
#define ORIG_HEATER_BED_PIN -1
#define ORIG_TEMP_BED_PIN -1
MK/module/boards/BOARD_ELEFU_3.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 21
* Elefu RA Board
****************************************************************************************/
#define KNOWN_BOARD 1
#ifndef __AVR_ATmega2560__
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
#endif
#define ORIG_X_STEP_PIN 49
#define ORIG_X_DIR_PIN 13
#define ORIG_X_ENABLE_PIN 48
#define ORIG_X_MIN_PIN 35
#define ORIG_X_MAX_PIN -1 // 34
#define ORIG_Y_STEP_PIN 11
#define ORIG_Y_DIR_PIN 9
#define ORIG_Y_ENABLE_PIN 12
#define ORIG_Y_MIN_PIN 33
#define ORIG_Y_MAX_PIN -1 // 32
#define ORIG_Z_STEP_PIN 7
#define ORIG_Z_DIR_PIN 6
#define ORIG_Z_ENABLE_PIN 8
#define ORIG_Z_MIN_PIN 31
#define ORIG_Z_MAX_PIN -1 // 30
#define ORIG_E2_STEP_PIN 43
#define ORIG_E2_DIR_PIN 47
#define ORIG_E2_ENABLE_PIN 42
#define ORIG_E1_STEP_PIN 18
#define ORIG_E1_DIR_PIN 19
#define ORIG_E1_ENABLE_PIN 38
#define ORIG_E0_STEP_PIN 40
#define ORIG_E0_DIR_PIN 41
#define ORIG_E0_ENABLE_PIN 37
#define SDPOWER -1
#define LED_PIN -1 // Use +12V Aux port for LED Ring
#define ORIG_FAN_PIN 16 // 5V PWM
#define ORIG_PS_ON_PIN 10 // Set to -1 if using a manual switch on the PWRSW Connector
#define SLEEP_WAKE_PIN 26 // This feature still needs work
#define ORIG_HEATER_0_PIN 45 // 12V PWM1
#define ORIG_HEATER_1_PIN 46 // 12V PWM2
#define ORIG_HEATER_2_PIN 17 // 12V PWM3
#define ORIG_HEATER_BED_PIN 44 // DOUBLE 12V PWM
#define ORIG_TEMP_0_PIN 3 // ANALOG NUMBERING
#define ORIG_TEMP_1_PIN 2 // ANALOG NUMBERING
#define ORIG_TEMP_2_PIN 1 // ANALOG NUMBERING
#define ORIG_TEMP_BED_PIN 0 // ANALOG NUMBERING
#define ORIG_BEEPER_PIN 36
#define KILL_PIN -1
// M240 Triggers a camera by emulating a Canon RC-1 Remote
// Data from: http://www.doc-diy.net/photo/rc-1_hacked/
#define PHOTOGRAPH_PIN 29
#if ENABLED(RA_CONTROL_PANEL)
#define SDSS 53
#define SD_DETECT_PIN 28
#define BTN_EN1 14
#define BTN_EN2 39
#define BTN_ENC 15 // the click
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0
#endif // RA_CONTROL_PANEL
#if ENABLED(RA_DISCO)
//variables for which pins the TLC5947 is using
#define TLC_CLOCK_PIN 25
#define TLC_BLANK_PIN 23
#define TLC_XLAT_PIN 22
#define TLC_DATA_PIN 24
//We also need to define pin to port number mapping for the 2560 to match the pins listed above. If you change the TLC pins, update this as well per the 2560 datasheet!
//This currently only works with the RA Board.
#define TLC_CLOCK_BIT 3 //bit 3 on port A
#define TLC_CLOCK_PORT &PORTA //bit 3 on port A
#define TLC_BLANK_BIT 1 //bit 1 on port A
#define TLC_BLANK_PORT &PORTA //bit 1 on port A
#define TLC_DATA_BIT 2 //bit 2 on port A
#define TLC_DATA_PORT &PORTA //bit 2 on port A
#define TLC_XLAT_BIT 0 //bit 0 on port A
#define TLC_XLAT_PORT &PORTA //bit 0 on port A
//change this to match your situation. Lots of TLCs takes up the arduino SRAM very quickly, so be careful
//Leave it at at least 1 if you have enabled RA_LIGHTING
//The number of TLC5947 boards chained together for use with the animation, additional ones will repeat the animation on them, but are not individually addressable and mimic those before them. You can leave the default at 2 even if you only have 1 TLC5947 module.
#define NUM_TLCS 2
//These TRANS_ARRAY values let you change the order the LEDs on the lighting modules will animate for chase functions.
//Modify them according to your specific situation.
//NOTE: the array should be 8 long for every TLC you have. These defaults assume (2) TLCs.
#define TRANS_ARRAY {0, 1, 2, 3, 4, 5, 6, 7, 15, 14, 13, 12, 11, 10, 9, 8} //forwards
//#define TRANS_ARRAY {7, 6, 5, 4, 3, 2, 1, 0, 8, 9, 10, 11, 12, 13, 14, 15} //backwards
#endif //RA_LIGHTING
MK/module/boards/BOARD_GEN3_MONOLITHIC.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 22
* Gen3 Monolithic Electronics
****************************************************************************************/
#define KNOWN_BOARD 1
#ifndef __AVR_ATmega644P__
#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
#endif
#define DEBUG_PIN 0
// x axis
#define ORIG_X_STEP_PIN 15
#define ORIG_X_DIR_PIN 18
#define ORIG_X_MIN_PIN 20
//Alex Checar #define X_STOP_PIN 20
#define ORIG_X_ENABLE_PIN 24 // actually uses ORIG_Y_DIR_PIN
#define ORIG_X_MAX_PIN -1
// y axes
#define ORIG_Y_STEP_PIN 23
#define ORIG_Y_DIR_PIN 22
#define ORIG_Y_MIN_PIN 25
//Alex Checar #define Y_STOP_PIN 25
#define ORIG_Y_ENABLE_PIN 24 // shared with ORIG_X_ENABLE_PIN
#define ORIG_Y_MAX_PIN -1
// z axes
#define ORIG_Z_STEP_PIN 27
#define ORIG_Z_DIR_PIN 28
#define ORIG_Z_MIN_PIN 30
//Alex Checar #define Z_STOP_PIN 30
#define ORIG_Z_ENABLE_PIN 29
#define ORIG_Z_MAX_PIN -1
//extruder pins
#define ORIG_E0_STEP_PIN 12
#define ORIG_E0_DIR_PIN 17
#define ORIG_E0_ENABLE_PIN 3
#define ORIG_HEATER_0_PIN 16
#define ORIG_TEMP_0_PIN 0
#define ORIG_FAN_PIN -1
//bed pins
#define ORIG_HEATER_BED_PIN -1
#define ORIG_TEMP_BED_PIN -1
#define SDSS -1
#define SDPOWER -1
#define LED_PIN -1
//pin for controlling the PSU.
#define ORIG_PS_ON_PIN 14
//Alex extras from Gen3+
#define KILL_PIN -1
#define ORIG_TEMP_1_PIN -1
#define ORIG_TEMP_2_PIN -1
#define ORIG_HEATER_2_PIN -1
MK/module/boards/BOARD_GEN3_PLUS.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 9
* Gen3+
****************************************************************************************/
#define MOTHERBOARD BOARD_SANGUINOLOLU_11 /*TODO: Figure out, Why is this done?*/
#define KNOWN_BOARD 1
#ifndef __AVR_ATmega644P__
#ifndef __AVR_ATmega1284P__
#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
#endif
#endif
#define ORIG_X_STEP_PIN 15
#define ORIG_X_DIR_PIN 18
#define X_STOP_PIN 20
#define ORIG_Y_STEP_PIN 23
#define ORIG_Y_DIR_PIN 22
#define Y_STOP_PIN 25
#define ORIG_Z_STEP_PIN 27
#define ORIG_Z_DIR_PIN 28
#define Z_STOP_PIN 30
#define ORIG_E0_STEP_PIN 17
#define ORIG_E0_DIR_PIN 21
#define LED_PIN -1
#define ORIG_FAN_PIN -1
#define ORIG_PS_ON_PIN 14
#define KILL_PIN -1
#define ORIG_HEATER_0_PIN 12 // (extruder)
#define ORIG_HEATER_BED_PIN 16 // (bed)
#define ORIG_X_ENABLE_PIN 19
#define ORIG_Y_ENABLE_PIN 24
#define ORIG_Z_ENABLE_PIN 29
#define ORIG_E0_ENABLE_PIN 13
#define ORIG_TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 33 extruder)
#define ORIG_TEMP_1_PIN -1
#define ORIG_TEMP_2_PIN -1
#define ORIG_TEMP_BED_PIN 5 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed)
#define SDPOWER -1
#define SDSS 4
#define ORIG_HEATER_2_PIN -1
MK/module/boards/BOARD_GEN6.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 5 - 51
* Gen6 - Gen6 Deluxe
****************************************************************************************/
#define KNOWN_BOARD 1
#ifndef __AVR_ATmega644P__
#ifndef __AVR_ATmega1284P__
#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
#endif
#endif
//x axis pins
#define ORIG_X_STEP_PIN 15
#define ORIG_X_DIR_PIN 18
#define ORIG_X_ENABLE_PIN 19
#define X_STOP_PIN 20
//y axis pins
#define ORIG_Y_STEP_PIN 23
#define ORIG_Y_DIR_PIN 22
#define ORIG_Y_ENABLE_PIN 24
#define Y_STOP_PIN 25
//z axis pins
#define ORIG_Z_STEP_PIN 27
#define ORIG_Z_DIR_PIN 28
#define ORIG_Z_ENABLE_PIN 29
#define Z_STOP_PIN 30
//extruder pins
#define ORIG_E0_STEP_PIN 4 //Edited @ EJE Electronics 20100715
#define ORIG_E0_DIR_PIN 2 //Edited @ EJE Electronics 20100715
#define ORIG_E0_ENABLE_PIN 3 //Added @ EJE Electronics 20100715
#define ORIG_TEMP_0_PIN 5 //changed @ rkoeppl 20110410
#define ORIG_TEMP_1_PIN -1 //changed @ rkoeppl 20110410
#define ORIG_TEMP_2_PIN -1 //changed @ rkoeppl 20110410
#define ORIG_HEATER_0_PIN 14 //changed @ rkoeppl 20110410
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#if MOTHERBOARD == 5
#define ORIG_HEATER_BED_PIN -1 //changed @ rkoeppl 20110410
#define ORIG_TEMP_BED_PIN -1 //changed @ rkoeppl 20110410
#else
#define ORIG_HEATER_BED_PIN 1 //changed @ rkoeppl 20110410
#define ORIG_TEMP_BED_PIN 0 //changed @ rkoeppl 20110410
#endif
#define SDPOWER -1
#define SDSS 17
#define LED_PIN -1 //changed @ rkoeppl 20110410
#define ORIG_FAN_PIN -1 //changed @ rkoeppl 20110410
#define ORIG_PS_ON_PIN -1 //changed @ rkoeppl 20110410
#define KILL_PIN -1 //changed @ drakelive 20120830
//our pin for debugging.
#define DEBUG_PIN 0
//our RS485 pins
#define TORIG_X_ENABLE_PIN 12
#define RORIG_X_ENABLE_PIN 13
MK/module/boards/BOARD_GEN7_12.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 11
* Gen7 v1.1, v1.2
****************************************************************************************/
#define KNOWN_BOARD
#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__)
#error Oops! Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu.
#endif
#if DISABLED(GEN7_VERSION)
#define GEN7_VERSION 12 // v1.x
#endif
//X axis pins
#define ORIG_X_STEP_PIN 19
#define ORIG_X_DIR_PIN 18
#define ORIG_X_ENABLE_PIN 24
#define X_STOP_PIN 7
//Y axis pins
#define ORIG_Y_STEP_PIN 23
#define ORIG_Y_DIR_PIN 22
#define ORIG_Y_ENABLE_PIN 24
#define Y_STOP_PIN 5
//Z axis pins
#define ORIG_Z_STEP_PIN 26
#define ORIG_Z_DIR_PIN 25
#define ORIG_Z_ENABLE_PIN 24
#define ORIG_Z_MIN_PIN 1
#define ORIG_Z_MAX_PIN 0
//extruder pins
#define ORIG_E0_STEP_PIN 28
#define ORIG_E0_DIR_PIN 27
#define ORIG_E0_ENABLE_PIN 24
#define ORIG_TEMP_0_PIN 1
#define ORIG_TEMP_1_PIN -1
#define ORIG_TEMP_2_PIN -1
#define ORIG_TEMP_BED_PIN 2
#define ORIG_HEATER_0_PIN 4
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_HEATER_BED_PIN 3
#define KILL_PIN -1
#define SDPOWER -1
#define SDSS -1 // SCL pin of I2C header
#define LED_PIN -1
#define ORIG_FAN_PIN 31
#define ORIG_PS_ON_PIN 15
//All these generations of Gen7 supply thermistor power
//via PS_ON, so ignore bad thermistor readings
#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
//our pin for debugging.
#define DEBUG_PIN 0
//our RS485 pins
#define TORIG_X_ENABLE_PIN 12
#define RORIG_X_ENABLE_PIN 13
MK/module/boards/BOARD_GEN7_13.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 12
* Gen7 v1.3
****************************************************************************************/
#define KNOWN_BOARD
#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__)
#error Oops! Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu.
#endif
#if DISABLED(GEN7_VERSION)
#define GEN7_VERSION 13 // v1.x
#endif
//X axis pins
#define ORIG_X_STEP_PIN 19
#define ORIG_X_DIR_PIN 18
#define ORIG_X_ENABLE_PIN 24
#define X_STOP_PIN 7
//Y axis pins
#define ORIG_Y_STEP_PIN 23
#define ORIG_Y_DIR_PIN 22
#define ORIG_Y_ENABLE_PIN 24
#define Y_STOP_PIN 5
//Z axis pins
#define ORIG_Z_STEP_PIN 26
#define ORIG_Z_DIR_PIN 25
#define ORIG_Z_ENABLE_PIN 24
#define ORIG_Z_MIN_PIN 1
#define ORIG_Z_MAX_PIN 0
//extruder pins
#define ORIG_E0_STEP_PIN 28
#define ORIG_E0_DIR_PIN 27
#define ORIG_E0_ENABLE_PIN 24
#define ORIG_TEMP_0_PIN 1
#define ORIG_TEMP_1_PIN -1
#define ORIG_TEMP_2_PIN -1
#define ORIG_TEMP_BED_PIN 2
#define ORIG_HEATER_0_PIN 4
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_HEATER_BED_PIN 3
#define KILL_PIN -1
#define SDPOWER -1
#define SDSS -1 // SCL pin of I2C header
#define LED_PIN -1
#define ORIG_FAN_PIN -1 // Gen7 v1.3 removed the fan pin
#define ORIG_PS_ON_PIN 15
//All these generations of Gen7 supply thermistor power
//via PS_ON, so ignore bad thermistor readings
#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
//our pin for debugging.
#define DEBUG_PIN 0
//our RS485 pins
#define TORIG_X_ENABLE_PIN 12
#define RORIG_X_ENABLE_PIN 13
MK/module/boards/BOARD_GEN7_14.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 13
* Gen7 v1.4 pin assignment
****************************************************************************************/
#define GEN7_VERSION 14 // v1.4
#define KNOWN_BOARD
#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__)
#error Oops! Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu.
#endif
//X axis pins
#define ORIG_X_STEP_PIN 29
#define ORIG_X_DIR_PIN 28
#define ORIG_X_ENABLE_PIN 25
#define X_STOP_PIN 0
//Y axis pins
#define ORIG_Y_STEP_PIN 27
#define ORIG_Y_DIR_PIN 26
#define ORIG_Y_ENABLE_PIN 25
#define Y_STOP_PIN 1
//Z axis pins
#define ORIG_Z_STEP_PIN 23
#define ORIG_Z_DIR_PIN 22
#define ORIG_Z_ENABLE_PIN 25
#define Z_STOP_PIN 2
//extruder pins
#define ORIG_E0_STEP_PIN 19
#define ORIG_E0_DIR_PIN 18
#define ORIG_E0_ENABLE_PIN 25
#define ORIG_TEMP_0_PIN 1
#define ORIG_TEMP_1_PIN -1
#define ORIG_TEMP_2_PIN -1
#define ORIG_TEMP_BED_PIN 0
#define ORIG_HEATER_0_PIN 4
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_HEATER_BED_PIN 3
#define KILL_PIN -1
#define SDPOWER -1
#define SDSS -1 // SCL pin of I2C header
#define LED_PIN -1
#define ORIG_FAN_PIN -1
#define ORIG_PS_ON_PIN 15
//our pin for debugging.
#define DEBUG_PIN 0
//our RS485 pins
#define TORIG_X_ENABLE_PIN 12
#define RORIG_X_ENABLE_PIN 13
MK/module/boards/BOARD_GEN7_CUSTOM.h 0 → 100644
View file @ b3267d28
/******************************************************************************
* 10
* Gen7 Alfons
* These Pins are assigned for the modified GEN7
* Board from Alfons3 Please review the pins and adjust it for your needs
******************************************************************************/
#define KNOWN_BOARD
#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__)
#error Oops! Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu.
#endif
//x axis pins
#define ORIG_X_STEP_PIN 21 // different from standard GEN7
#define ORIG_X_DIR_PIN 20 // different from standard GEN7
#define ORIG_X_ENABLE_PIN 24
#define X_STOP_PIN 0
//y axis pins
#define ORIG_Y_STEP_PIN 23
#define ORIG_Y_DIR_PIN 22
#define ORIG_Y_ENABLE_PIN 24
#define Y_STOP_PIN 1
//z axis pins
#define ORIG_Z_STEP_PIN 26
#define ORIG_Z_DIR_PIN 25
#define ORIG_Z_ENABLE_PIN 24
#define Z_STOP_PIN 2
//extruder pins
#define ORIG_E0_STEP_PIN 28
#define ORIG_E0_DIR_PIN 27
#define ORIG_E0_ENABLE_PIN 24
#define ORIG_TEMP_0_PIN 2
#define ORIG_TEMP_1_PIN -1
#define ORIG_TEMP_2_PIN -1
#define ORIG_TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed)
#define ORIG_HEATER_0_PIN 4
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_HEATER_BED_PIN 3 // (bed)
#define SDPOWER -1
#define SDSS 31 // SCL pin of I2C header || CS Pin for SD Card support
#define LED_PIN -1
#define ORIG_FAN_PIN -1
#define ORIG_PS_ON_PIN 19
//our pin for debugging.
#define DEBUG_PIN -1
//our RS485 pins
//#define TORIG_X_ENABLE_PIN 12
//#define RORIG_X_ENABLE_PIN 13
#define ORIG_BEEPER_PIN -1
#define SD_DETECT_PIN -1
#define SUICIDE_PIN -1 //has to be defined; otherwise Power_off doesn't work
#define KILL_PIN -1
//Pins for 4bit LCD Support
#define LCD_PINS_RS 18
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 16
#define LCD_PINS_D5 15
#define LCD_PINS_D6 13
#define LCD_PINS_D7 14
//buttons are directly attached
#define BTN_EN1 11
#define BTN_EN2 10
#define BTN_ENC 12 //the click
MK/module/boards/BOARD_K8200.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 78
* K8200
****************************************************************************************/
#define KNOWN_BOARD 1
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
#endif
#define LARGE_FLASH true
#define ORIG_X_STEP_PIN 54
#define ORIG_X_DIR_PIN 55
#define ORIG_X_ENABLE_PIN 38
#define ORIG_X_MIN_PIN 3
#define ORIG_X_MAX_PIN 2
#define ORIG_Y_STEP_PIN 60
#define ORIG_Y_DIR_PIN 61
#define ORIG_Y_ENABLE_PIN 56
#define ORIG_Y_MIN_PIN 14
#define ORIG_Y_MAX_PIN 15
#define ORIG_Z_STEP_PIN 46
#define ORIG_Z_DIR_PIN 48
#define ORIG_Z_ENABLE_PIN 62
#define ORIG_Z_MIN_PIN 18
#define ORIG_Z_MAX_PIN -1
#define Y2_STEP_PIN 36
#define Y2_DIR_PIN 34
#define Y2_ENABLE_PIN 30
#define Z2_STEP_PIN 36
#define Z2_DIR_PIN 34
#define Z2_ENABLE_PIN 30
#define ORIG_E0_STEP_PIN 26
#define ORIG_E0_DIR_PIN 28
#define ORIG_E0_ENABLE_PIN 24
#define ORIG_E1_STEP_PIN 36
#define ORIG_E1_DIR_PIN 34
#define ORIG_E1_ENABLE_PIN 30
#define SDPOWER -1
#define SDSS 25
#define LED_PIN 13
#define ORIG_FAN_PIN 8 // IO pin. Buffer needed
#define ORIG_PS_ON_PIN 12
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) || ENABLED(G3D_PANEL)
#define KILL_PIN 41
#else
#define KILL_PIN -1
#endif
#define ORIG_HEATER_0_PIN 10 // HOTEND 1
#define ORIG_HEATER_1_PIN 12 // HOTEND 2
#define ORIG_HEATER_2_PIN 6 // HOTEND 3
#define ORIG_HEATER_3_PIN -1
#define ORIG_TEMP_0_PIN 13 // ANALOG NUMBERING
#define ORIG_TEMP_1_PIN 15 // ANALOG NUMBERING
#define ORIG_TEMP_2_PIN -1 // ANALOG NUMBERING
#define ORIG_HEATER_BED_PIN 9 // NO BED
#define ORIG_TEMP_BED_PIN 14 // ANALOG NUMBERING
#if NUM_SERVOS > 0
#define SERVO0_PIN 11
#if NUM_SERVOS > 1
#define SERVO1_PIN 6
#if NUM_SERVOS > 2
#define SERVO2_PIN 5
#if NUM_SERVOS > 3
#define SERVO3_PIN 4
#endif
#endif
#endif
#endif
#define ORIG_BEEPER_PIN 33
#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
#define ORIG_BEEPER_PIN -1
#define LCD_PINS_RS 27
#define LCD_PINS_ENABLE 29
#define LCD_PINS_D4 37
#define LCD_PINS_D5 35
#define LCD_PINS_D6 33
#define LCD_PINS_D7 31
// Buttons
#define BTN_EN1 16
#define BTN_EN2 17
#define BTN_ENC 23 //the click
#endif // ULTRA_LCD && NEWPANEL
// SPI for Max6675 Thermocouple
#define MAX6675_SS 66 // Do not use pin 53 if there is even the remote possibility of using Display/SD card
MK/module/boards/BOARD_LEAPFROG.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 999
* Leapfrog Driver board
****************************************************************************************/
#define KNOWN_BOARD 1
#ifndef __AVR_ATmega1280__
#ifndef __AVR_ATmega2560__
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
#endif
#endif
#define ORIG_X_STEP_PIN 28
#define ORIG_X_DIR_PIN 63
#define ORIG_X_ENABLE_PIN 29
#define ORIG_X_MIN_PIN 47
#define ORIG_X_MAX_PIN -1 //2 //Max endstops default to disabled "-1", set to commented value to enable.
#define ORIG_Y_STEP_PIN 14 // A6
#define ORIG_Y_DIR_PIN 15 // A0
#define ORIG_Y_ENABLE_PIN 39
#define ORIG_Y_MIN_PIN 48
#define ORIG_Y_MAX_PIN -1 //15
#define ORIG_Z_STEP_PIN 31 // A2
#define ORIG_Z_DIR_PIN 32 // A6
#define ORIG_Z_ENABLE_PIN 30 // A1
#define ORIG_Z_MIN_PIN 49
#define ORIG_Z_MAX_PIN -1
#define ORIG_E0_STEP_PIN 34 //34
#define ORIG_E0_DIR_PIN 35 //35
#define ORIG_E0_ENABLE_PIN 33 //33
#define ORIG_E1_STEP_PIN 37 //37
#define ORIG_E1_DIR_PIN 40 //40
#define ORIG_E1_ENABLE_PIN 36 //36
#define Y2_STEP_PIN 37
#define Y2_DIR_PIN 40
#define Y2_ENABLE_PIN 36
#define Z2_STEP_PIN 37
#define Z2_DIR_PIN 40
#define Z2_ENABLE_PIN 36
#define SDPOWER -1
#define SDSS 11
#define SD_DETECT_PIN -1 // 10 optional also used as mode pin
#define LED_PIN 13
#define ORIG_FAN_PIN 7
#define ORIG_PS_ON_PIN -1
#define KILL_PIN -1
#define SOL1_PIN 16
#define SOL2_PIN 17
#define ORIG_HEATER_0_PIN 9
#define ORIG_HEATER_1_PIN 8 // 12
#define ORIG_HEATER_2_PIN 11 //-1 // 13
#define ORIG_TEMP_0_PIN 13 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define ORIG_TEMP_1_PIN 15 // 1
#define ORIG_TEMP_2_PIN -1 // 2
#define ORIG_HEATER_BED_PIN 10 // 14/15
#define ORIG_TEMP_BED_PIN 14 // 1,2 or I2C
/* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */
MK/module/boards/BOARD_MEGATRONICS.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 70
* MegaTronics
****************************************************************************************/
#define KNOWN_BOARD 1
#ifndef __AVR_ATmega2560__
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
#endif
#define LARGE_FLASH true
#define ORIG_X_STEP_PIN 26
#define ORIG_X_DIR_PIN 28
#define ORIG_X_ENABLE_PIN 24
#define ORIG_X_MIN_PIN 41
#define ORIG_X_MAX_PIN 37
#define ORIG_Y_STEP_PIN 60 // A6
#define ORIG_Y_DIR_PIN 61 // A7
#define ORIG_Y_ENABLE_PIN 22
#define ORIG_Y_MIN_PIN 14
#define ORIG_Y_MAX_PIN 15
#define ORIG_Z_STEP_PIN 54 // A0
#define ORIG_Z_DIR_PIN 55 // A1
#define ORIG_Z_ENABLE_PIN 56 // A2
#define ORIG_Z_MIN_PIN 18
#define ORIG_Z_MAX_PIN 19
#define ORIG_E0_STEP_PIN 31
#define ORIG_E0_DIR_PIN 32
#define ORIG_E0_ENABLE_PIN 38
#define ORIG_E1_STEP_PIN 34
#define ORIG_E1_DIR_PIN 36
#define ORIG_E1_ENABLE_PIN 30
#define SDPOWER -1
#define SDSS 53
#define LED_PIN 13
#define ORIG_FAN_PIN 7 // IO pin. Buffer needed
#define ORIG_PS_ON_PIN 12
#define KILL_PIN -1
#define ORIG_HEATER_0_PIN 9 // EXTRUDER 1
#define ORIG_HEATER_1_PIN 8 // EXTRUDER 2 (FAN On Sprinter)
#define ORIG_HEATER_2_PIN -1
#if TEMP_SENSOR_0 == -1
#define ORIG_TEMP_0_PIN 8 // ANALOG NUMBERING
#else
#define ORIG_TEMP_0_PIN 13 // ANALOG NUMBERING
#endif
#define ORIG_TEMP_1_PIN 15 // ANALOG NUMBERING
#define ORIG_TEMP_2_PIN -1 // ANALOG NUMBERING
#define ORIG_HEATER_BED_PIN 10 // BED
#define ORIG_TEMP_BED_PIN 14 // ANALOG NUMBERING
#define ORIG_BEEPER_PIN 33 // Beeper on AUX-4
#if ENABLED(ULTRA_LCD)
#if ENABLED(NEWPANEL)
//arduino pin which triggers an piezzo beeper
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
//buttons are directly attached using AUX-2
#define BTN_EN1 59
#define BTN_EN2 64
#define BTN_ENC 43 //the click
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0
#define SD_DETECT_PIN -1 // Ramps does not use this port
#endif //NEWPANEL
#endif //ULTRA_LCD
MK/module/boards/BOARD_MEGATRONICS_2.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 701
* MegaTronics v2.0
****************************************************************************************/
#define KNOWN_BOARD 1
#ifndef __AVR_ATmega2560__
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
#endif
#define LARGE_FLASH true
#define ORIG_X_STEP_PIN 26
#define ORIG_X_DIR_PIN 27
#define ORIG_X_ENABLE_PIN 25
#define ORIG_X_MIN_PIN 37
#define ORIG_X_MAX_PIN 40 //2 //Max endstops default to disabled "-1", set to commented value to enable.
#define ORIG_Y_STEP_PIN 4 // A6
#define ORIG_Y_DIR_PIN 54 // A0
#define ORIG_Y_ENABLE_PIN 5
#define ORIG_Y_MIN_PIN 41
#define ORIG_Y_MAX_PIN 38 //15
#define ORIG_Z_STEP_PIN 56 // A2
#define ORIG_Z_DIR_PIN 60 // A6
#define ORIG_Z_ENABLE_PIN 55 // A1
#define ORIG_Z_MIN_PIN 18
#define ORIG_Z_MAX_PIN 19
#define ORIG_E0_STEP_PIN 35
#define ORIG_E0_DIR_PIN 36
#define ORIG_E0_ENABLE_PIN 34
#define ORIG_E1_STEP_PIN 29
#define ORIG_E1_DIR_PIN 39
#define ORIG_E1_ENABLE_PIN 28
#define ORIG_E2_STEP_PIN 23
#define ORIG_E2_DIR_PIN 24
#define ORIG_E2_ENABLE_PIN 22
#define SDPOWER -1
#define SDSS 53
#define LED_PIN 13
#define ORIG_FAN_PIN 7
#define ORIG_FAN2_PIN 6
#define ORIG_PS_ON_PIN 12
#define KILL_PIN -1
#define ORIG_HEATER_0_PIN 9 // EXTRUDER 1
#define ORIG_HEATER_1_PIN 8 // EXTRUDER 2
#define ORIG_HEATER_2_PIN -1
#define SHIFT_CLK 63
#define SHIFT_LD 42
#define SHIFT_OUT 17
#define SHIFT_EN 17
#if TEMP_SENSOR_0 == -1
#define ORIG_TEMP_0_PIN 4 // ANALOG NUMBERING
#else
#define ORIG_TEMP_0_PIN 13 // ANALOG NUMBERING
#endif
#if TEMP_SENSOR_1 == -1
#define ORIG_TEMP_1_PIN 8 // ANALOG NUMBERING
#else
#define ORIG_TEMP_1_PIN 15 // ANALOG NUMBERING
#endif
#define ORIG_TEMP_2_PIN -1 // ANALOG NUMBERING
#define ORIG_HEATER_BED_PIN 10 // BED
#if TEMP_SENSOR_BED == -1
#define ORIG_TEMP_BED_PIN 8 // ANALOG NUMBERING
#else
#define ORIG_TEMP_BED_PIN 14 // ANALOG NUMBERING
#endif
#define ORIG_BEEPER_PIN 64
#define LCD_PINS_RS 14
#define LCD_PINS_ENABLE 15
#define LCD_PINS_D4 30
#define LCD_PINS_D5 31
#define LCD_PINS_D6 32
#define LCD_PINS_D7 33
//buttons are directly attached using keypad
#define BTN_EN1 61
#define BTN_EN2 59
#define BTN_ENC 43 //the click
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0
#define SD_DETECT_PIN -1 // Megatronics does not use this port
MK/module/boards/BOARD_MEGATRONICS_3.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 703
* MegaTronics v3.0
****************************************************************************************/
#define KNOWN_BOARD 1
#ifndef __AVR_ATmega2560__
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
#endif
#define LARGE_FLASH true
#define ORIG_X_STEP_PIN 58
#define ORIG_X_DIR_PIN 57
#define ORIG_X_ENABLE_PIN 59
#define ORIG_X_MIN_PIN 37
#define ORIG_X_MAX_PIN 40 //2 //Max endstops default to disabled "-1", set to commented value to enable.
#define ORIG_Y_STEP_PIN 5 // A6
#define ORIG_Y_DIR_PIN 17 // A0
#define ORIG_Y_ENABLE_PIN 4
#define ORIG_Y_MIN_PIN 41
#define ORIG_Y_MAX_PIN 38 //15
#define ORIG_Z_STEP_PIN 16 // A2
#define ORIG_Z_DIR_PIN 11 // A6
#define ORIG_Z_ENABLE_PIN 3 // A1
#define ORIG_Z_MIN_PIN 18
#define ORIG_Z_MAX_PIN 19
#define ORIG_E0_STEP_PIN 28
#define ORIG_E0_DIR_PIN 27
#define ORIG_E0_ENABLE_PIN 29
#define ORIG_E1_STEP_PIN 25
#define ORIG_E1_DIR_PIN 24
#define ORIG_E1_ENABLE_PIN 26
#define ORIG_E2_STEP_PIN 22
#define ORIG_E2_DIR_PIN 60
#define ORIG_E2_ENABLE_PIN 23
#define ORIG_E3_STEP_PIN 54
#define ORIG_E3_DIR_PIN 55
#define ORIG_E3_ENABLE_PI 55
#define SDPOWER -1
#define SDSS 53
#define LED_PIN 13
#if NUM_SERVOS > 0
#define SERVO0_PIN 46 //AUX3-6
#if NUM_SERVOS > 1
#define SERVO1_PIN 47 //AUX3-5
#if NUM_SERVOS > 2
#define SERVO2_PIN 48 //AUX3-4
#if NUM_SERVOS > 3
#define SERVO2_PIN 49 //AUX3-3
#endif
#endif
#endif
#endif
#define ORIG_PS_ON_PIN 12
#define KILL_PIN -1
#define ORIG_HEATER_0_PIN 2
#define ORIG_HEATER_1_PIN 8
#define ORIG_HEATER_2_PIN 9
#define ORIG_HEATER_BED_PIN 10
#define ORIG_FAN_PIN 6
#define ORIG_FAN2_PIN 7
#if TEMP_SENSOR_0 == -1
#define ORIG_TEMP_0_PIN 11 // ANALOG NUMBERING
#else
#define ORIG_TEMP_0_PIN 15 // ANALOG NUMBERING
#endif
#if TEMP_SENSOR_1 == -1
#define ORIG_TEMP_1_PIN 10 // ANALOG NUMBERING
#else
#define ORIG_TEMP_1_PIN 13 // ANALOG NUMBERING
#endif
#if TEMP_SENSOR_2 == -1
#define ORIG_TEMP_2_PIN 9 // ANALOG NUMBERING
#else
#define ORIG_TEMP_2_PIN 12 // ANALOG NUMBERING
#endif
#if TEMP_SENSOR_BED == -1
#define ORIG_TEMP_BED_PIN 8 // ANALOG NUMBERING
#else
#define ORIG_TEMP_BED_PIN 14 // ANALOG NUMBERING
#endif
#define ORIG_BEEPER_PIN 61
#define LCD_PINS_RS 32
#define LCD_PINS_ENABLE 31
#define LCD_PINS_D4 14
#define LCD_PINS_D5 30
#define LCD_PINS_D6 39
#define LCD_PINS_D7 15
#define SHIFT_CLK 43
#define SHIFT_LD 35
#define SHIFT_OUT 34
#define SHIFT_EN 44
//buttons are directly attached using keypad
#define BTN_EN1 44
#define BTN_EN2 45
#define BTN_ENC 33 //the click
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0
#define SD_DETECT_PIN -1 // Megatronics does not use this port
MK/module/boards/BOARD_MINITRONICS.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 702
* Minitronics v1.0
****************************************************************************************/
#define KNOWN_BOARD 1
#ifndef __AVR_ATmega1281__
#error Oops! Make sure you have 'Minitronics ' selected from the 'Tools -> Boards' menu.
#endif
#define LARGE_FLASH true
#define ORIG_X_STEP_PIN 48
#define ORIG_X_DIR_PIN 47
#define ORIG_X_ENABLE_PIN 49
#define ORIG_X_MIN_PIN 5
#define ORIG_X_MAX_PIN -1 //2 //Max endstops default to disabled "-1", set to commented value to enable.
#define ORIG_Y_STEP_PIN 39 // A6
#define ORIG_Y_DIR_PIN 40 // A0
#define ORIG_Y_ENABLE_PIN 38
#define ORIG_Y_MIN_PIN 2
#define ORIG_Y_MAX_PIN -1 //15
#define ORIG_Z_STEP_PIN 42 // A2
#define ORIG_Z_DIR_PIN 43 // A6
#define ORIG_Z_ENABLE_PIN 41 // A1
#define ORIG_Z_MIN_PIN 6
#define ORIG_Z_MAX_PIN -1
#define ORIG_E0_STEP_PIN 45
#define ORIG_E0_DIR_PIN 44
#define ORIG_E0_ENABLE_PIN 27
#define ORIG_E1_STEP_PIN 36
#define ORIG_E1_DIR_PIN 35
#define ORIG_E1_ENABLE_PIN 37
#define ORIG_E2_STEP_PIN -1
#define ORIG_E2_DIR_PIN -1
#define ORIG_E2_ENABLE_PIN -1
#define SDPOWER -1
#define SDSS 53
#define LED_PIN 46
#define ORIG_FAN_PIN 9
#define ORIG_FAN2_PIN -1
#define ORIG_PS_ON_PIN -1
#define KILL_PIN -1
#define ORIG_HEATER_0_PIN 7 // EXTRUDER 1
#define ORIG_HEATER_1_PIN 8 // EXTRUDER 2
#define ORIG_HEATER_2_PIN 9 // thermo couple
#if TEMP_SENSOR_0 == -1
#define ORIG_TEMP_0_PIN 5 // ANALOG NUMBERING
#else
#define ORIG_TEMP_0_PIN 7 // ANALOG NUMBERING
#endif
#define ORIG_TEMP_1_PIN 6 // ANALOG NUMBERING
#define ORIG_TEMP_2_PIN -1 // ANALOG NUMBERING
#define ORIG_HEATER_BED_PIN 3 // BED
#define ORIG_TEMP_BED_PIN 6 // ANALOG NUMBERING
#define ORIG_BEEPER_PIN -1
#define LCD_PINS_RS -1
#define LCD_PINS_ENABLE -1
#define LCD_PINS_D4 -1
#define LCD_PINS_D5 -1
#define LCD_PINS_D6 -1
#define LCD_PINS_D7 -1
//buttons are directly attached using keypad
#define BTN_EN1 -1
#define BTN_EN2 -1
#define BTN_ENC -1 //the click
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0
#define SD_DETECT_PIN -1 // Megatronics does not use this port
MK/module/boards/BOARD_MKS_BASE.h 0 → 100644
View file @ b3267d28
/**
* MKS BASE 1.0 – Arduino Mega2560 with RAMPS v1.4 pin assignments
*/
#define KNOWN_BOARD 1
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
#endif
#define LARGE_FLASH true
// X axis pins
#define ORIG_X_STEP_PIN 54
#define ORIG_X_DIR_PIN 55
#define ORIG_X_ENABLE_PIN 38
#define ORIG_X_MIN_PIN 3
#define ORIG_X_MAX_PIN 2
// Y axis pins
#define ORIG_Y_STEP_PIN 60
#define ORIG_Y_DIR_PIN 61
#define ORIG_Y_ENABLE_PIN 56
#define ORIG_Y_MIN_PIN 14
#define ORIG_Y_MAX_PIN 15
#define Y2_STEP_PIN 36
#define Y2_DIR_PIN 34
#define Y2_ENABLE_PIN 30
// Z axis pins
#define ORIG_Z_STEP_PIN 46
#define ORIG_Z_DIR_PIN 48
#define ORIG_Z_ENABLE_PIN 62
#define ORIG_Z_MIN_PIN 18
#define ORIG_Z_MAX_PIN 19
#define Z2_STEP_PIN 36
#define Z2_DIR_PIN 34
#define Z2_ENABLE_PIN 30
// E axis pins
#define ORIG_E0_STEP_PIN 26
#define ORIG_E0_DIR_PIN 28
#define ORIG_E0_ENABLE_PIN 24
#define ORIG_E1_STEP_PIN 36
#define ORIG_E1_DIR_PIN 34
#define ORIG_E1_ENABLE_PIN 30
#define SDPOWER -1
#define SDSS 53
#define LED_PIN 13
#define ORIG_FAN_PIN 9
#define PS_ON_PIN 12
#define ORIG_HEATER_0_PIN 10 // Hotend 1
#define ORIG_HEATER_1_PIN 7 // Hotend 2
#define ORIG_HEATER_2_PIN -1
#define ORIG_HEATER_3_PIN -1
#define ORIG_TEMP_0_PIN 13 // ANALOG NUMBERING
#define ORIG_TEMP_1_PIN 15 // ANALOG NUMBERING
#define ORIG_TEMP_2_PIN -1 // ANALOG NUMBERING
#define ORIG_TEMP_3_PIN -1 // ANALOG NUMBERING
#define ORIG_HEATER_BED_PIN 8 // BED
#define ORIG_TEMP_BED_PIN 14 // ANALOG NUMBERING
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) || ENABLED(G3D_PANEL)
#define KILL_PIN 41
#else
#define KILL_PIN -1
#endif
#if NUM_SERVOS > 0
#define SERVO0_PIN 11
#if NUM_SERVOS > 1
#define SERVO1_PIN 6
#if NUM_SERVOS > 2
#define SERVO2_PIN 5
#if NUM_SERVOS > 3
#define SERVO3_PIN 4
#endif
#endif
#endif
#endif
#if ENABLED(ULTRA_LCD)
#if ENABLED(NEWPANEL)
#if ENABLED(PANEL_ONE)
#define LCD_PINS_RS 40
#define LCD_PINS_ENABLE 42
#define LCD_PINS_D4 65
#define LCD_PINS_D5 66
#define LCD_PINS_D6 44
#define LCD_PINS_D7 64
#else
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#endif // PANEL_ONE
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#define ORIG_BEEPER_PIN 37
#define BTN_EN1 31
#define BTN_EN2 33
#define BTN_ENC 35
#define SD_DETECT_PIN 49
#elif ENABLED(LCD_I2C_PANELOLU2)
#define BTN_EN1 47 // reverse if the encoder turns the wrong way.
#define BTN_EN2 43
#define BTN_ENC 32
#define LCD_SDSS 53
#define SD_DETECT_PIN -1
#define KILL_PIN 41
#elif ENABLED(LCD_I2C_VIKI)
#define BTN_EN1 22 // reverse if the encoder turns the wrong way.
#define BTN_EN2 7
#define BTN_ENC -1
#define LCD_SDSS 53
#define SD_DETECT_PIN 49
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
#define BTN_EN1 35 // reverse if the encoder turns the wrong way.
#define BTN_EN2 37
#define BTN_ENC 31
#define SD_DETECT_PIN 49
#define LCD_SDSS 53
#define KILL_PIN 41
#define ORIG_BEEPER_PIN 23
#define DOGLCD_CS 29
#define DOGLCD_A0 27
#define LCD_PIN_BL 33
#else
// arduino pin which triggers an piezzo beeper
#define ORIG_BEEPER_PIN 33 // Beeper on AUX-4
// buttons are directly attached using AUX-2
#if ENABLED(REPRAPWORLD_KEYPAD)
#define BTN_EN1 64 // encoder
#define BTN_EN2 59 // encoder
#define BTN_ENC 63 // enter button
#define SHIFT_OUT 40 // shift register
#define SHIFT_CLK 44 // shift register
#define SHIFT_LD 42 // shift register
#elif ENABLED(PANEL_ONE)
#define BTN_EN1 59 // AUX2 PIN 3
#define BTN_EN2 63 // AUX2 PIN 4
#define BTN_ENC 49 // AUX3 PIN 7
#else
#define BTN_EN1 37
#define BTN_EN2 35
#define BTN_ENC 31 // the click
#endif
#if ENABLED(G3D_PANEL)
#define SD_DETECT_PIN 49
#else
#define SD_DETECT_PIN -1 // Ramps does not use this port
#endif
#endif
#else // old style panel with shift register
// arduino pin witch triggers an piezo beeper
#define ORIG_BEEPER_PIN 33 // No Beeper added
//buttons are attached to a shift register
// Not wired this yet
//#define SHIFT_CLK 38
//#define SHIFT_LD 42
//#define SHIFT_OUT 40
//#define SHIFT_EN 17
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#endif // NEWPANEL
#endif // ULTRA_LCD
// SPI for Max6675 Thermocouple
#define MAX6675_SS 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
MK/module/boards/BOARD_MKS_MINI.h 0 → 100644
View file @ b3267d28
/**
* MKS MINI 1.0 – Arduino Mega2560
*/
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
#endif
/*
#define LARGE_FLASH true
#ifdef IS_RAMPS_14
#define SERVO0_PIN 11
#else
#define SERVO0_PIN 7 // RAMPS_13 // Will conflict with BTN_EN2 on LCD_I2C_VIKI
#endif
#define SERVO1_PIN 6
#define SERVO2_PIN 5
#define SERVO3_PIN 4
*/
#define X_STEP_PIN 54
#define X_DIR_PIN 55
#define X_ENABLE_PIN 38
#define X_MIN_PIN -1 // unused for deltabot, was 3
#define X_MAX_PIN 2
#define Y_STEP_PIN 60
#define Y_DIR_PIN 61
#define Y_ENABLE_PIN 56
#define Y_MIN_PIN -1 // unused for deltabot, was 14
#define Y_MAX_PIN 15
#define Z_STEP_PIN 46
#define Z_DIR_PIN 48
#define Z_ENABLE_PIN 62
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
#define E0_STEP_PIN 26
#define E0_DIR_PIN 28
#define E0_ENABLE_PIN 24
#define E1_STEP_PIN -1 // 36
#define E1_DIR_PIN -1 // 34
#define E1_ENABLE_PIN -1 // 30
#define SDPOWER -1
#define LED_PIN 13
#define FAN_PIN 9
#define PS_ON_PIN 12
#define HEATER_0_PIN 10 // EXTRUDER 1
#define HEATER_1_PIN -1 // EXTRUDER 2 ( Not supported on MKS Mini )
#define HEATER_2_PIN -1 // EXTRUDER 3 ( Not supported on MKS Mini )
#define TEMP_0_PIN 13 // ANALOG NUMBERING
#define TEMP_1_PIN -1 // ANALOG NUMBERING
#define TEMP_2_PIN -1 // ANALOG NUMBERING
#define HEATER_BED_PIN -1 // NO BED
#define TEMP_BED_PIN -1 // ANALOG NUMBERING
// #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#define KILL_PIN 41
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#define BEEPER_PIN 37
#define BTN_EN1 31
#define BTN_EN2 33
#define BTN_ENC 35
#define SCK_PIN 52
#define MISO_PIN 50
#define MOSI_PIN 51
#define SD_DETECT_PIN 49
#define SDSS 53
#define MAX6675_SS 58
// #endif
#if ENABLED(FILAMENT_SENSOR) // FMM added for Filament Extruder
// define analog pin for the filament width sensor input
// Use the RAMPS 1.4 Analog input 5 on the AUX2 connector
#define FILWIDTH_PIN 5
#endif
#if ENABLED(Z_MIN_PROBE_ENDSTOP)
// Define a pin to use as the signal pin on Arduino for the Z_PROBE endstop.
#define Z_MIN_PROBE_PIN 32
#endif
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
// define digital pin 4 for the filament runout sensor. Use the RAMPS 1.4 digital input 4 on the servos connector
#define FILRUNOUT_PIN 4
#endif
#if ENABLED(Z_PROBE_SLED)
#define SLED_PIN -1
#endif
/*
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) || ENABLED(G3D_PANEL)
#define KILL_PIN 41
#else
#define KILL_PIN -1
#endif
#if ENABLED(ULTRA_LCD)
#if ENABLED(NEWPANEL)
#if ENABLED(PANEL_ONE)
#define LCD_PINS_RS 40
#define LCD_PINS_ENABLE 42
#define LCD_PINS_D4 65
#define LCD_PINS_D5 66
#define LCD_PINS_D6 44
#define LCD_PINS_D7 64
#else
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#endif
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#define BEEPER_PIN 37
#define BTN_EN1 31
#define BTN_EN2 33
#define BTN_ENC 35
#define SD_DETECT_PIN 49
#elif ENABLED(LCD_I2C_PANELOLU2)
#define BTN_EN1 47 // reverse if the encoder turns the wrong way.
#define BTN_EN2 43
#define BTN_ENC 32
#define LCD_SDSS 53
#define SD_DETECT_PIN -1
#define KILL_PIN 41
#elif ENABLED(LCD_I2C_VIKI)
#define BTN_EN1 22 // reverse if the encoder turns the wrong way.
#define BTN_EN2 7 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf
// tells about 40/42.
// 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13.
#define BTN_ENC -1
#define LCD_SDSS 53
#define SD_DETECT_PIN 49
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
#define BTN_EN1 35 // reverse if the encoder turns the wrong way.
#define BTN_EN2 37
#define BTN_ENC 31
#define SD_DETECT_PIN 49
#define LCD_SDSS 53
#define KILL_PIN 41
#define BEEPER_PIN 23
#define DOGLCD_CS 29
#define DOGLCD_A0 27
#define LCD_PIN_BL 33
#elif ENABLED(MINIPANEL)
#define BEEPER_PIN 42
// Pins for DOGM SPI LCD Support
#define DOGLCD_A0 44
#define DOGLCD_CS 66
#define LCD_PIN_BL 65 // backlight LED on A11/D65
#define SDSS 53
#define KILL_PIN 64
// GLCD features
//#define LCD_CONTRAST 190
// Uncomment screen orientation
//#define LCD_SCREEN_ROT_90
//#define LCD_SCREEN_ROT_180
//#define LCD_SCREEN_ROT_270
//The encoder and click button
#define BTN_EN1 40
#define BTN_EN2 63
#define BTN_ENC 59 //the click switch
//not connected to a pin
#define SD_DETECT_PIN 49
#else
#define BEEPER_PIN 33 // Beeper on AUX-4
// buttons are directly attached using AUX-2
#if ENABLED(REPRAPWORLD_KEYPAD)
#define BTN_EN1 64 // encoder
#define BTN_EN2 59 // encoder
#define BTN_ENC 63 // enter button
#define SHIFT_OUT 40 // shift register
#define SHIFT_CLK 44 // shift register
#define SHIFT_LD 42 // shift register
#elif ENABLED(PANEL_ONE)
#define BTN_EN1 59 // AUX2 PIN 3
#define BTN_EN2 63 // AUX2 PIN 4
#define BTN_ENC 49 // AUX3 PIN 7
#else
#define BTN_EN1 37
#define BTN_EN2 35
#define BTN_ENC 31 // the click
#endif
#if ENABLED(G3D_PANEL)
#define SD_DETECT_PIN 49
#else
#define SD_DETECT_PIN -1 // Ramps doesn't use this
#endif
#endif
#else // !NEWPANEL (Old-style panel with shift register)
#define BEEPER_PIN 33 // No Beeper added
// Buttons are attached to a shift register
// Not wired yet
//#define SHIFT_CLK 38
//#define SHIFT_LD 42
//#define SHIFT_OUT 40
//#define SHIFT_EN 17
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#endif // !NEWPANEL
#endif // ULTRA_LCD
// SPI for Max6675 Thermocouple
#if DISABLED(SDSUPPORT)
#define MAX6675_SS 58 // Do not use pin 53 if there is even the remote possibility of using Display/SD card
#else
#define MAX6675_SS 58 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
#endif
#if DISABLED(SDSUPPORT)
// these pins are defined in the SD library if building with SD support
#define SCK_PIN 52
#define MISO_PIN 50
#define MOSI_PIN 51
#endif
*/
MK/module/boards/BOARD_OMCA.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 90 - 91
* Open Motion controller with enable based extruders
*
* ATMega644
*
* +---\/---+
* (D 0) PB0 1| |40 PA0 (AI 0 / D31)
* (D 1) PB1 2| |39 PA1 (AI 1 / D30)
* INT2 (D 2) PB2 3| |38 PA2 (AI 2 / D29)
* PWM (D 3) PB3 4| |37 PA3 (AI 3 / D28)
* PWM (D 4) PB4 5| |36 PA4 (AI 4 / D27)
* MOSI (D 5) PB5 6| |35 PA5 (AI 5 / D26)
* MISO (D 6) PB6 7| |34 PA6 (AI 6 / D25)
* SCK (D 7) PB7 8| |33 PA7 (AI 7 / D24)
* RST 9| |32 AREF
* VCC 10| |31 GND
* GND 11| |30 AVCC
* XTAL2 12| |29 PC7 (D 23)
* XTAL1 13| |28 PC6 (D 22)
* RX0 (D 8) PD0 14| |27 PC5 (D 21) TDI
* TX0 (D 9) PD1 15| |26 PC4 (D 20) TDO
* INT0 RX1 (D 10) PD2 16| |25 PC3 (D 19) TMS
* INT1 TX1 (D 11) PD3 17| |24 PC2 (D 18) TCK
* PWM (D 12) PD4 18| |23 PC1 (D 17) SDA
* PWM (D 13) PD5 19| |22 PC0 (D 16) SCL
* PWM (D 14) PD6 20| |21 PD7 (D 15) PWM
* +--------+
*
****************************************************************************************/
#define KNOWN_BOARD 1
#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__)
#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu. (Final OMCA board)
#endif
#define ORIG_X_STEP_PIN 26
#define ORIG_X_DIR_PIN 25
#define ORIG_X_ENABLE_PIN 10
#define X_STOP_PIN 0
#define ORIG_Y_STEP_PIN 28
#define ORIG_Y_DIR_PIN 27
#define ORIG_Y_ENABLE_PIN 10
#define Y_STOP_PIN 1
#define ORIG_Z_STEP_PIN 23
#define ORIG_Z_DIR_PIN 22
#define ORIG_Z_ENABLE_PIN 10
#define Z_STOP_PIN 2
#define ORIG_E0_STEP_PIN 24
#define ORIG_E0_DIR_PIN 21
#define ORIG_E0_ENABLE_PIN 10
/* future proofing */
#define __FS 20
#define __FD 19
#define __GS 18
#define __GD 13
#define UNUSED_PWM 14 /* PWM on LEFT connector */
#define ORIG_E1_STEP_PIN -1 // 21
#define ORIG_E1_DIR_PIN -1 // 20
#define ORIG_E1_ENABLE_PIN -1 // 19
#define ORIG_E2_STEP_PIN -1 // 21
#define ORIG_E2_DIR_PIN -1 // 20
#define ORIG_E2_ENABLE_PIN -1 // 18
#define SDPOWER -1
#define SDSS 11
#define SD_DETECT_PIN -1 // 10 optional also used as mode pin
#define LED_PIN -1
#define ORIG_FAN_PIN 14 /* PWM on MIDDLE connector */
#define ORIG_PS_ON_PIN -1
#define KILL_PIN -1
#define ORIG_HEATER_0_PIN 3 /*DONE PWM on RIGHT connector */
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_TEMP_0_PIN 0 // ANALOG INPUT NUMBERING
#define ORIG_TEMP_1_PIN 1 // ANALOG
#define ORIG_TEMP_2_PIN -1 // 2
#define ORIG_HEATER_BED_PIN 4
#define ORIG_TEMP_BED_PIN 2 // 1,2 or I2C
#define I2C_SCL 16
#define I2C_SDA 17
MK/module/boards/BOARD_OMCA_A.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 90 - 91
* Open Motion controller with enable based extruders
*
* ATMega644
*
* +---\/---+
* (D 0) PB0 1| |40 PA0 (AI 0 / D31)
* (D 1) PB1 2| |39 PA1 (AI 1 / D30)
* INT2 (D 2) PB2 3| |38 PA2 (AI 2 / D29)
* PWM (D 3) PB3 4| |37 PA3 (AI 3 / D28)
* PWM (D 4) PB4 5| |36 PA4 (AI 4 / D27)
* MOSI (D 5) PB5 6| |35 PA5 (AI 5 / D26)
* MISO (D 6) PB6 7| |34 PA6 (AI 6 / D25)
* SCK (D 7) PB7 8| |33 PA7 (AI 7 / D24)
* RST 9| |32 AREF
* VCC 10| |31 GND
* GND 11| |30 AVCC
* XTAL2 12| |29 PC7 (D 23)
* XTAL1 13| |28 PC6 (D 22)
* RX0 (D 8) PD0 14| |27 PC5 (D 21) TDI
* TX0 (D 9) PD1 15| |26 PC4 (D 20) TDO
* INT0 RX1 (D 10) PD2 16| |25 PC3 (D 19) TMS
* INT1 TX1 (D 11) PD3 17| |24 PC2 (D 18) TCK
* PWM (D 12) PD4 18| |23 PC1 (D 17) SDA
* PWM (D 13) PD5 19| |22 PC0 (D 16) SCL
* PWM (D 14) PD6 20| |21 PD7 (D 15) PWM
* +--------+
*
****************************************************************************************/
#define KNOWN_BOARD 1
#ifndef __AVR_ATmega644__
#error Oops! Make sure you have 'SanguinoA' selected from the 'Tools -> Boards' menu.
#endif
#define ORIG_X_STEP_PIN 21
#define ORIG_X_DIR_PIN 20
#define ORIG_X_ENABLE_PIN 24
#define X_STOP_PIN 0
#define ORIG_Y_STEP_PIN 23
#define ORIG_Y_DIR_PIN 22
#define ORIG_Y_ENABLE_PIN 24
#define Y_STOP_PIN 1
#define ORIG_Z_STEP_PIN 26
#define ORIG_Z_DIR_PIN 25
#define ORIG_Z_ENABLE_PIN 24
#define Z_STOP_PIN 2
#define ORIG_E0_STEP_PIN 28
#define ORIG_E0_DIR_PIN 27
#define ORIG_E0_ENABLE_PIN 24
#define ORIG_E1_STEP_PIN -1 // 19
#define ORIG_E1_DIR_PIN -1 // 18
#define ORIG_E1_ENABLE_PIN 24
#define ORIG_E2_STEP_PIN -1 // 17
#define ORIG_E2_DIR_PIN -1 // 16
#define ORIG_E2_ENABLE_PIN 24
#define SDPOWER -1
#define SDSS 11
#define SD_DETECT_PIN -1 // 10 optional also used as mode pin
#define LED_PIN -1
#define ORIG_FAN_PIN 3
#define ORIG_PS_ON_PIN -1
#define KILL_PIN -1
#define ORIG_HEATER_0_PIN 4
#define ORIG_HEATER_1_PIN -1 // 12
#define ORIG_HEATER_2_PIN -1 // 13
#define ORIG_TEMP_0_PIN 0 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define ORIG_TEMP_1_PIN -1 // 1
#define ORIG_TEMP_2_PIN -1 // 2
#define ORIG_HEATER_BED_PIN -1 // 14/15
#define ORIG_TEMP_BED_PIN -1 // 1,2 or I2C
/* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */
MK/module/boards/BOARD_PIBOT.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 316
* PiBot Controller Rev2.0
****************************************************************************************/
#define KNOWN_BOARD
#ifndef __AVR_ATmega2560__
#error Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu.
#endif
#define LARGE_FLASH true
// X axis pins
#define ORIG_X_STEP_PIN 24
#define ORIG_X_DIR_PIN 23
#define ORIG_X_ENABLE_PIN 22
#define ORIG_X_MIN_PIN 62
#define ORIG_X_MAX_PIN 63
// Y axis pins
#define ORIG_Y_STEP_PIN 27
#define ORIG_Y_DIR_PIN 26
#define ORIG_Y_ENABLE_PIN 25
#define ORIG_Y_MIN_PIN 64
#define ORIG_Y_MAX_PIN 65
// Z axis pins
#define ORIG_Z_STEP_PIN 15
#define ORIG_Z_DIR_PIN 14
#define ORIG_Z_ENABLE_PIN 39
#define ORIG_Z_MIN_PIN 66
#define ORIG_Z_MAX_PIN 67
// E axis pins
#define ORIG_E0_STEP_PIN 32
#define ORIG_E0_DIR_PIN 31
#define ORIG_E0_ENABLE_PIN 30
#define ORIG_E1_STEP_PIN 35
#define ORIG_E1_DIR_PIN 34
#define ORIG_E1_ENABLE_PIN 33
#define SDPOWER -1
#define SDSS 53
#define LED_PIN -1
#define SD_DETECT_PIN 40
#define ORIG_FAN_PIN 6
#define ORIG_FAN2_PIN 7
#define ORIG_PS_ON_PIN 17
#define ORIG_HEATER_0_PIN 5
#define ORIG_HEATER_1_PIN 2
#define ORIG_HEATER_2_PIN -1
#define ORIG_HEATER_3_PIN -1
#define ORIG_TEMP_0_PIN 2 // ANALOG NUMBERING
#define ORIG_TEMP_1_PIN 4 // ANALOG NUMBERING
#define ORIG_TEMP_2_PIN -1 // ANALOG NUMBERING
#define ORIG_TEMP_3_PIN -1 // ANALOG NUMBERING
#define ORIG_HEATER_BED_PIN 4 // BED
#define ORIG_TEMP_BED_PIN 1 // ANALOG NUMBERING
MK/module/boards/BOARD_RADDS.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 401
*
* RADDS
****************************************************************************************/
#define KNOWN_BOARD
#ifndef __SAM3X8E__
#error Oops! Make sure you have 'Arduino Due' selected from the 'Tools -> Boards' menu.
#endif
#define RADDS
#define ORIG_X_STEP_PIN 24
#define ORIG_X_DIR_PIN 23
#define ORIG_X_ENABLE_PIN 26
#define ORIG_Y_STEP_PIN 17
#define ORIG_Y_DIR_PIN 16
#define ORIG_Y_ENABLE_PIN 22
#define ORIG_Z_STEP_PIN 2
#define ORIG_Z_DIR_PIN 3
#define ORIG_Z_ENABLE_PIN 15
#define ORIG_X_MIN_PIN 28
#define ORIG_X_MAX_PIN 34
#define ORIG_Y_MIN_PIN 30
#define ORIG_Y_MAX_PIN 36
#define ORIG_Z_MIN_PIN 32
#define ORIG_Z_MAX_PIN 38
#define ORIG_E0_STEP_PIN 61
#define ORIG_E0_DIR_PIN 60
#define ORIG_E0_ENABLE_PIN 62
#define ORIG_E1_STEP_PIN 64
#define ORIG_E1_DIR_PIN 63
#define ORIG_E1_ENABLE_PIN 65
#define ORIG_E2_STEP_PIN 51
#define ORIG_E2_DIR_PIN 53
#define ORIG_E2_ENABLE_PIN 49
#define ORIG_E3_STEP_PIN 35
#define ORIG_E3_DIR_PIN 33
#define ORIG_E3_ENABLE_PIN 37
#define ORIG_E4_STEP_PIN 29
#define ORIG_E4_DIR_PIN 27
#define ORIG_E4_ENABLE_PIN 31
#define SDPOWER -1
#define SDSS 4
#define LED_PIN -1
#define ORIG_BEEPER_PIN 41
#define ORIG_FAN_PIN 9
#define ORIG_FAN2_PIN 8
#define ORIG_PS_ON_PIN 40
#define KILL_PIN -1
#define ORIG_HEATER_BED_PIN 7 // BED
#define ORIG_HEATER_0_PIN 13
#define ORIG_HEATER_1_PIN 12
#define ORIG_HEATER_2_PIN 11
#define ORIG_TEMP_BED_PIN 4 // ANALOG NUMBERING
#define ORIG_TEMP_0_PIN 0 // ANALOG NUMBERING
#define ORIG_TEMP_1_PIN 1 // ANALOG NUMBERING
#define ORIG_TEMP_2_PIN 2 // ANALOG NUMBERING
#define ORIG_TEMP_3_PIN 3 // ANALOG NUMBERING
#if NUM_SERVOS > 0
#define SERVO0_PIN 5
#if NUM_SERVOS > 1
#define SERVO1_PIN 6
#if NUM_SERVOS > 2
#define SERVO2_PIN 39
#if NUM_SERVOS > 3
#define SERVO3_PIN 40
#endif
#endif
#endif
#endif
#if ENABLED(ULTRA_LCD)
// RADDS LCD panel
#if ENABLED(RADDS_DISPLAY)
#define LCD_PINS_RS 42
#define LCD_PINS_ENABLE 43
#define LCD_PINS_D4 44
#define LCD_PINS_D5 45
#define LCD_PINS_D6 46
#define LCD_PINS_D7 47
#define BEEPER 41
#define BTN_EN1 50
#define BTN_EN2 52
#define BTN_ENC 48
#define BTN_BACK 71
#undef SDSS
#define SDSS 10
#define SD_DETECT_PIN 14
#elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define LCD_PINS_RS 46
#define LCD_PINS_ENABLE 47
#define LCD_PINS_D4 44
#define ORIG_BEEPER_PIN 41
#define BTN_EN1 50
#define BTN_EN2 52
#define BTN_ENC 48
#elif ENABLED(SSD1306_OLED_I2C_CONTROLLER)
#define BTN_EN1 50
#define BTN_EN2 52
#define BTN_ENC 48
#define BEEPER 41
#define LCD_SDSS 10
#define SD_DETECT_PIN 14
#define KILL_PIN -1
#elif ENABLED(SPARK_FULL_GRAPHICS)
#define LCD_PINS_D4 29
#define LCD_PINS_ENABLE 27
#define LCD_PINS_RS 25
#define BTN_EN1 35
#define BTN_EN2 33
#define BTN_ENC 37
#define KILL_PIN -1
#undef BEEPER
#define BEEPER -1
#endif // SPARK_FULL_GRAPHICS
#endif // ULTRA_LCD
MK/module/boards/BOARD_RAMBO.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 301
* Rambo
****************************************************************************************/
#define KNOWN_BOARD
#ifndef __AVR_ATmega2560__
#error Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu.
#endif
#define LARGE_FLASH true
#define ORIG_X_STEP_PIN 37
#define ORIG_X_DIR_PIN 48
#define ORIG_X_MIN_PIN 12
#define ORIG_X_MAX_PIN 24
#define ORIG_X_ENABLE_PIN 29
#define X_MS1_PIN 40
#define X_MS2_PIN 41
#define ORIG_Y_STEP_PIN 36
#define ORIG_Y_DIR_PIN 49
#define ORIG_Y_MIN_PIN 11
#define ORIG_Y_MAX_PIN 23
#define ORIG_Y_ENABLE_PIN 28
#define Y_MS1_PIN 69
#define Y_MS2_PIN 39
#define ORIG_Z_STEP_PIN 35
#define ORIG_Z_DIR_PIN 47
#define ORIG_Z_MIN_PIN 10
#define ORIG_Z_MAX_PIN 30
#define ORIG_Z_ENABLE_PIN 27
#define Z_MS1_PIN 68
#define Z_MS2_PIN 67
#define ORIG_HEATER_BED_PIN 3
#define ORIG_TEMP_BED_PIN 2
#define ORIG_HEATER_0_PIN 9
#define ORIG_TEMP_0_PIN 0
#define ORIG_HEATER_1_PIN 7
#define ORIG_TEMP_1_PIN 1
#if ENABLED(BARICUDA)
#define ORIG_HEATER_2_PIN 6
#else
#define ORIG_HEATER_2_PIN -1
#endif
#define ORIG_TEMP_2_PIN -1
#define ORIG_E0_STEP_PIN 34
#define ORIG_E0_DIR_PIN 43
#define ORIG_E0_ENABLE_PIN 26
#define E0_MS1_PIN 65
#define E0_MS2_PIN 66
#define ORIG_E1_STEP_PIN 33
#define ORIG_E1_DIR_PIN 42
#define ORIG_E1_ENABLE_PIN 25
#define E1_MS1_PIN 63
#define E1_MS2_PIN 64
#define DIGIPOTSS_PIN 38
#define DIGIPOT_CHANNELS {4,5,3,0,1} // X Y Z E0 E1 digipot channels to stepper driver mapping
#define SDPOWER -1
#define SDSS 53
#define LED_PIN 13
#define ORIG_FAN_PIN 8
#define ORIG_PS_ON_PIN 4
#define KILL_PIN -1 // 80 with Smart Controller LCD
#define SUICIDE_PIN -1 // PIN that has to be turned on right after start, to keep power flowing.
#if ENABLED(ULTRA_LCD)
#define KILL_PIN 80
#if ENABLED(NEWPANEL)
// arduino pin which triggers an piezzo beeper
#define ORIG_BEEPER_PIN 79 // Beeper on AUX-4
#define LCD_PINS_RS 70
#define LCD_PINS_ENABLE 71
#define LCD_PINS_D4 72
#define LCD_PINS_D5 73
#define LCD_PINS_D6 74
#define LCD_PINS_D7 75
//buttons are directly attached using AUX-2
#define BTN_EN1 76
#define BTN_EN2 77
#define BTN_ENC 78 //the click
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0
#define SD_DETECT_PIN 81 // Ramps does not use this port
#else //old style panel with shift register
//arduino pin witch triggers an piezzo beeper
#define ORIG_BEEPER_PIN 33 No Beeper added
//buttons are attached to a shift register
// Not wired this yet
// #define SHIFT_CLK 38
// #define SHIFT_LD 42
// #define SHIFT_OUT 40
// #define SHIFT_EN 17
#define LCD_PINS_RS 75
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
//bits in the shift register that carry the buttons for:
// left up center down right red
#define BL_LE 7
#define BL_UP 6
#define BL_MI 5
#define BL_DW 4
#define BL_RI 3
#define BL_ST 2
#define BLEN_B 1
#define BLEN_A 0
#endif
#endif //ULTRA_LCD
MK/module/boards/BOARD_RAMPS4DUE.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 433
* Arduino Due pin assignment
* for RAMPS4DUE (http://forums.reprap.org/read.php?219,479626,page=1)
****************************************************************************************/
#define KNOWN_BOARD
#ifndef __SAM3X8E__
#error Oops! Make sure you have 'Arduino Due' selected from the 'Tools -> Boards' menu.
#endif
#define ORIG_X_STEP_PIN 54
#define ORIG_X_DIR_PIN 55
#define ORIG_X_ENABLE_PIN 38
#define ORIG_X_MIN_PIN 3
#define ORIG_X_MAX_PIN 2
#define ORIG_Y_STEP_PIN 60
#define ORIG_Y_DIR_PIN 61
#define ORIG_Y_ENABLE_PIN 56
#define ORIG_Y_MIN_PIN 14
#define ORIG_Y_MAX_PIN 15
#define ORIG_Z_STEP_PIN 46
#define ORIG_Z_DIR_PIN 48
#define ORIG_Z_ENABLE_PIN 62
#define ORIG_Z_MIN_PIN 18
#define ORIG_Z_MAX_PIN 19
#define Y2_STEP_PIN 36
#define Y2_DIR_PIN 34
#define Y2_ENABLE_PIN 30
#define Z2_STEP_PIN 36
#define Z2_DIR_PIN 34
#define Z2_ENABLE_PIN 30
#define ORIG_E0_STEP_PIN 26
#define ORIG_E0_DIR_PIN 28
#define ORIG_E0_ENABLE_PIN 24
#define ORIG_E1_STEP_PIN 36
#define ORIG_E1_DIR_PIN 34
#define ORIG_E1_ENABLE_PIN 30
#define ORIG_HEATER_0_PIN 10
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_HEATER_BED_PIN 8 // BED
#define ORIG_TEMP_0_PIN 9 // ANALOG NUMBERING
#define ORIG_TEMP_1_PIN -1 // ANALOG NUMBERING
#define ORIG_TEMP_2_PIN -1 // ANALOG NUMBERING
#define ORIG_TEMP_BED_PIN 10 // ANALOG NUMBERING
#define ORIG_FAN_PIN 9
#define ORIG_PS_ON_PIN 12
#define SDPOWER -1
#define SDSS 53
#define LED_PIN 13
MK/module/boards/BOARD_RAMPS_13_HFB.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 33
* RAMPS 1.3 / 1.4
* RAMPS_13_HFB (Hotend0, Fan, Bed)
****************************************************************************************/
#define KNOWN_BOARD
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
#endif
#define LARGE_FLASH true
// X axis pins
#define ORIG_X_STEP_PIN 54
#define ORIG_X_DIR_PIN 55
#define ORIG_X_ENABLE_PIN 38
#define ORIG_X_MIN_PIN 3
#define ORIG_X_MAX_PIN 2
// Y axis pins
#define ORIG_Y_STEP_PIN 60
#define ORIG_Y_DIR_PIN 61
#define ORIG_Y_ENABLE_PIN 56
#define ORIG_Y_MIN_PIN 14
#define ORIG_Y_MAX_PIN 15
#define Y2_STEP_PIN 36
#define Y2_DIR_PIN 34
#define Y2_ENABLE_PIN 30
// Z axis pins
#define ORIG_Z_STEP_PIN 46
#define ORIG_Z_DIR_PIN 48
#define ORIG_Z_ENABLE_PIN 62
#define ORIG_Z_MIN_PIN 18
#define ORIG_Z_MAX_PIN 19
#define Z2_STEP_PIN 36
#define Z2_DIR_PIN 34
#define Z2_ENABLE_PIN 30
// E axis pins
#define ORIG_E0_STEP_PIN 26
#define ORIG_E0_DIR_PIN 28
#define ORIG_E0_ENABLE_PIN 24
#define ORIG_E1_STEP_PIN 36
#define ORIG_E1_DIR_PIN 34
#define ORIG_E1_ENABLE_PIN 30
#define SDPOWER -1
#define SDSS 53
#define LED_PIN 13
#define ORIG_FAN_PIN 9
#define ORIG_PS_ON_PIN 12
#define ORIG_HEATER_0_PIN 10 // Hotend 1
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_HEATER_3_PIN -1
#define ORIG_TEMP_0_PIN 13 // ANALOG NUMBERING
#define ORIG_TEMP_1_PIN 15 // ANALOG NUMBERING
#define ORIG_TEMP_2_PIN -1 // ANALOG NUMBERING
#define ORIG_TEMP_3_PIN -1 // ANALOG NUMBERING
#define ORIG_HEATER_BED_PIN 8 // BED
#define ORIG_TEMP_BED_PIN 14 // ANALOG NUMBERING
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) || ENABLED(G3D_PANEL)
#define KILL_PIN 41
#else
#define KILL_PIN -1
#endif
#if NUM_SERVOS > 0
#define SERVO0_PIN 11
#if NUM_SERVOS > 1
#define SERVO1_PIN 6
#if NUM_SERVOS > 2
#define SERVO2_PIN 5
#if NUM_SERVOS > 3
#define SERVO3_PIN 4
#endif
#endif
#endif
#endif
#if ENABLED(ULTRA_LCD)
#if ENABLED(NEWPANEL)
#if ENABLED(PANEL_ONE)
#define LCD_PINS_RS 40
#define LCD_PINS_ENABLE 42
#define LCD_PINS_D4 65
#define LCD_PINS_D5 66
#define LCD_PINS_D6 44
#define LCD_PINS_D7 64
#else
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#endif // PANEL_ONE
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#define ORIG_BEEPER_PIN 37
#define BTN_EN1 31
#define BTN_EN2 33
#define BTN_ENC 35
#define SD_DETECT_PIN 49
#elif ENABLED(LCD_I2C_PANELOLU2)
#define BTN_EN1 47 // reverse if the encoder turns the wrong way.
#define BTN_EN2 43
#define BTN_ENC 32
#define LCD_SDSS 53
#define SD_DETECT_PIN -1
#define KILL_PIN 41
#elif ENABLED(LCD_I2C_VIKI)
#define BTN_EN1 22 // reverse if the encoder turns the wrong way.
#define BTN_EN2 7
#define BTN_ENC -1
#define LCD_SDSS 53
#define SD_DETECT_PIN 49
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
#define BTN_EN1 35 // reverse if the encoder turns the wrong way.
#define BTN_EN2 37
#define BTN_ENC 31
#define SD_DETECT_PIN 49
#define LCD_SDSS 53
#define KILL_PIN 41
#define ORIG_BEEPER_PIN 23
#define DOGLCD_CS 29
#define DOGLCD_A0 27
#define LCD_PIN_BL 33
#else
// arduino pin which triggers an piezzo beeper
#define ORIG_BEEPER_PIN 33 // Beeper on AUX-4
// buttons are directly attached using AUX-2
#if ENABLED(REPRAPWORLD_KEYPAD)
#define BTN_EN1 64 // encoder
#define BTN_EN2 59 // encoder
#define BTN_ENC 63 // enter button
#define SHIFT_OUT 40 // shift register
#define SHIFT_CLK 44 // shift register
#define SHIFT_LD 42 // shift register
#elif ENABLED(PANEL_ONE)
#define BTN_EN1 59 // AUX2 PIN 3
#define BTN_EN2 63 // AUX2 PIN 4
#define BTN_ENC 49 // AUX3 PIN 7
#else
#define BTN_EN1 37
#define BTN_EN2 35
#define BTN_ENC 31 // the click
#endif
#if ENABLED(G3D_PANEL)
#define SD_DETECT_PIN 49
#else
#define SD_DETECT_PIN -1 // Ramps does not use this port
#endif
#endif
#else // old style panel with shift register
// arduino pin witch triggers an piezo beeper
#define ORIG_BEEPER_PIN 33 // No Beeper added
//buttons are attached to a shift register
// Not wired this yet
//#define SHIFT_CLK 38
//#define SHIFT_LD 42
//#define SHIFT_OUT 40
//#define SHIFT_EN 17
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#endif // NEWPANEL
#endif // ULTRA_LCD
// SPI for Max6675 Thermocouple
#define MAX6675_SS 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
MK/module/boards/BOARD_RAMPS_13_HFF.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 35
* RAMPS 1.3 / 1.4
* RAMPS_13_HFF (Hotend0, Fan, Fan)
****************************************************************************************/
#define KNOWN_BOARD
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
#endif
#define LARGE_FLASH true
// X axis pins
#define ORIG_X_STEP_PIN 54
#define ORIG_X_DIR_PIN 55
#define ORIG_X_ENABLE_PIN 38
#define ORIG_X_MIN_PIN 3
#define ORIG_X_MAX_PIN 2
// Y axis pins
#define ORIG_Y_STEP_PIN 60
#define ORIG_Y_DIR_PIN 61
#define ORIG_Y_ENABLE_PIN 56
#define ORIG_Y_MIN_PIN 14
#define ORIG_Y_MAX_PIN 15
#define Y2_STEP_PIN 36
#define Y2_DIR_PIN 34
#define Y2_ENABLE_PIN 30
// Z axis pins
#define ORIG_Z_STEP_PIN 46
#define ORIG_Z_DIR_PIN 48
#define ORIG_Z_ENABLE_PIN 62
#define ORIG_Z_MIN_PIN 18
#define ORIG_Z_MAX_PIN 19
#define Z2_STEP_PIN 36
#define Z2_DIR_PIN 34
#define Z2_ENABLE_PIN 30
// E axis pins
#define ORIG_E0_STEP_PIN 26
#define ORIG_E0_DIR_PIN 28
#define ORIG_E0_ENABLE_PIN 24
#define ORIG_E1_STEP_PIN 36
#define ORIG_E1_DIR_PIN 34
#define ORIG_E1_ENABLE_PIN 30
#define SDPOWER -1
#define SDSS 53
#define LED_PIN 13
#define ORIG_FAN_PIN 9
#define ORIG_PS_ON_PIN 12
#define ORIG_HEATER_0_PIN 10 // HOTEND 1
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_HEATER_3_PIN -1
#define ORIG_TEMP_0_PIN 13 // ANALOG NUMBERING
#define ORIG_TEMP_1_PIN 15 // ANALOG NUMBERING
#define ORIG_TEMP_2_PIN -1 // ANALOG NUMBERING
#define ORIG_TEMP_3_PIN -1 // ANALOG NUMBERING
#define ORIG_HEATER_BED_PIN -1 // BED
#define ORIG_TEMP_BED_PIN 14 // ANALOG NUMBERING
#if NUM_SERVOS > 0
#define SERVO0_PIN 11
#if NUM_SERVOS > 1
#define SERVO1_PIN 6
#if NUM_SERVOS > 2
#define SERVO2_PIN 5
#if NUM_SERVOS > 3
#define SERVO3_PIN 4
#endif
#endif
#endif
#endif
#if ENABLED(ULTRA_LCD)
#if ENABLED(NEWPANEL)
#if ENABLED(PANEL_ONE)
#define LCD_PINS_RS 40
#define LCD_PINS_ENABLE 42
#define LCD_PINS_D4 65
#define LCD_PINS_D5 66
#define LCD_PINS_D6 44
#define LCD_PINS_D7 64
#else
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#endif // PANEL_ONE
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#define ORIG_BEEPER_PIN 37
#define BTN_EN1 31
#define BTN_EN2 33
#define BTN_ENC 35
#define SD_DETECT_PIN 49
#elif ENABLED(LCD_I2C_PANELOLU2)
#define BTN_EN1 47 // reverse if the encoder turns the wrong way.
#define BTN_EN2 43
#define BTN_ENC 32
#define LCD_SDSS 53
#define SD_DETECT_PIN -1
#define KILL_PIN 41
#elif ENABLED(LCD_I2C_VIKI)
#define BTN_EN1 22 // reverse if the encoder turns the wrong way.
#define BTN_EN2 7
#define BTN_ENC -1
#define LCD_SDSS 53
#define SD_DETECT_PIN 49
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
#define BTN_EN1 35 // reverse if the encoder turns the wrong way.
#define BTN_EN2 37
#define BTN_ENC 31
#define SD_DETECT_PIN 49
#define LCD_SDSS 53
#define KILL_PIN 41
#define ORIG_BEEPER_PIN 23
#define DOGLCD_CS 29
#define DOGLCD_A0 27
#define LCD_PIN_BL 33
#else
// arduino pin which triggers an piezzo beeper
#define ORIG_BEEPER_PIN 33 // Beeper on AUX-4
// buttons are directly attached using AUX-2
#if ENABLED(REPRAPWORLD_KEYPAD)
#define BTN_EN1 64 // encoder
#define BTN_EN2 59 // encoder
#define BTN_ENC 63 // enter button
#define SHIFT_OUT 40 // shift register
#define SHIFT_CLK 44 // shift register
#define SHIFT_LD 42 // shift register
#elif ENABLED(PANEL_ONE)
#define BTN_EN1 59 // AUX2 PIN 3
#define BTN_EN2 63 // AUX2 PIN 4
#define BTN_ENC 49 // AUX3 PIN 7
#else
#define BTN_EN1 37
#define BTN_EN2 35
#define BTN_ENC 31 // the click
#endif
#if ENABLED(G3D_PANEL)
#define SD_DETECT_PIN 49
#else
#define SD_DETECT_PIN -1 // Ramps does not use this port
#endif
#endif
#else // old style panel with shift register
// arduino pin witch triggers an piezo beeper
#define ORIG_BEEPER_PIN 33 // No Beeper added
//buttons are attached to a shift register
// Not wired this yet
//#define SHIFT_CLK 38
//#define SHIFT_LD 42
//#define SHIFT_OUT 40
//#define SHIFT_EN 17
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#endif // NEWPANEL
#endif // ULTRA_LCD
// SPI for Max6675 Thermocouple
#define MAX6675_SS 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
MK/module/boards/BOARD_RAMPS_13_HHB.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 34
* RAMPS 1.3 / 1.4
* RAMPS_13_HHB (Hotend0, Hotend1, Bed)
****************************************************************************************/
#define KNOWN_BOARD
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
#endif
#define LARGE_FLASH true
// X axis pins
#define ORIG_X_STEP_PIN 54
#define ORIG_X_DIR_PIN 55
#define ORIG_X_ENABLE_PIN 38
#define ORIG_X_MIN_PIN 3
#define ORIG_X_MAX_PIN 2
// Y axis pins
#define ORIG_Y_STEP_PIN 60
#define ORIG_Y_DIR_PIN 61
#define ORIG_Y_ENABLE_PIN 56
#define ORIG_Y_MIN_PIN 14
#define ORIG_Y_MAX_PIN 15
#define Y2_STEP_PIN 36
#define Y2_DIR_PIN 34
#define Y2_ENABLE_PIN 30
// Z axis pins
#define ORIG_Z_STEP_PIN 46
#define ORIG_Z_DIR_PIN 48
#define ORIG_Z_ENABLE_PIN 62
#define ORIG_Z_MIN_PIN 18
#define ORIG_Z_MAX_PIN 19
#define Z2_STEP_PIN 36
#define Z2_DIR_PIN 34
#define Z2_ENABLE_PIN 30
// E axis pins
#define ORIG_E0_STEP_PIN 26
#define ORIG_E0_DIR_PIN 28
#define ORIG_E0_ENABLE_PIN 24
#define ORIG_E1_STEP_PIN 36
#define ORIG_E1_DIR_PIN 34
#define ORIG_E1_ENABLE_PIN 30
#define SDPOWER -1
#define SDSS 53
#define LED_PIN 13
#define ORIG_FAN_PIN 4
#define ORIG_PS_ON_PIN 12
#define ORIG_HEATER_0_PIN 10 // HOTEND 1
#define ORIG_HEATER_1_PIN 9 // HOTEND 2
#define ORIG_HEATER_2_PIN -1
#define ORIG_HEATER_3_PIN -1
#define ORIG_TEMP_0_PIN 13 // ANALOG NUMBERING
#define ORIG_TEMP_1_PIN 15 // ANALOG NUMBERING
#define ORIG_TEMP_2_PIN -1 // ANALOG NUMBERING
#define ORIG_TEMP_3_PIN -1 // ANALOG NUMBERING
#define ORIG_HEATER_BED_PIN 8 // BED
#define ORIG_TEMP_BED_PIN 14 // ANALOG NUMBERING
#if NUM_SERVOS > 0
#define SERVO0_PIN 11
#if NUM_SERVOS > 1
#define SERVO1_PIN 6
#if NUM_SERVOS > 2
#define SERVO2_PIN 5
#if NUM_SERVOS > 3
#define SERVO3_PIN 4
#endif
#endif
#endif
#endif
#if ENABLED(ULTRA_LCD)
#if ENABLED(NEWPANEL)
#if ENABLED(PANEL_ONE)
#define LCD_PINS_RS 40
#define LCD_PINS_ENABLE 42
#define LCD_PINS_D4 65
#define LCD_PINS_D5 66
#define LCD_PINS_D6 44
#define LCD_PINS_D7 64
#else
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#endif // PANEL_ONE
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#define ORIG_BEEPER_PIN 37
#define BTN_EN1 31
#define BTN_EN2 33
#define BTN_ENC 35
#define SD_DETECT_PIN 49
#elif ENABLED(LCD_I2C_PANELOLU2)
#define BTN_EN1 47 // reverse if the encoder turns the wrong way.
#define BTN_EN2 43
#define BTN_ENC 32
#define LCD_SDSS 53
#define SD_DETECT_PIN -1
#define KILL_PIN 41
#elif ENABLED(LCD_I2C_VIKI)
#define BTN_EN1 22 // reverse if the encoder turns the wrong way.
#define BTN_EN2 7
#define BTN_ENC -1
#define LCD_SDSS 53
#define SD_DETECT_PIN 49
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
#define BTN_EN1 35 // reverse if the encoder turns the wrong way.
#define BTN_EN2 37
#define BTN_ENC 31
#define SD_DETECT_PIN 49
#define LCD_SDSS 53
#define KILL_PIN 41
#define ORIG_BEEPER_PIN 23
#define DOGLCD_CS 29
#define DOGLCD_A0 27
#define LCD_PIN_BL 33
#else
// arduino pin which triggers an piezzo beeper
#define ORIG_BEEPER_PIN 33 // Beeper on AUX-4
// buttons are directly attached using AUX-2
#if ENABLED(REPRAPWORLD_KEYPAD)
#define BTN_EN1 64 // encoder
#define BTN_EN2 59 // encoder
#define BTN_ENC 63 // enter button
#define SHIFT_OUT 40 // shift register
#define SHIFT_CLK 44 // shift register
#define SHIFT_LD 42 // shift register
#elif ENABLED(PANEL_ONE)
#define BTN_EN1 59 // AUX2 PIN 3
#define BTN_EN2 63 // AUX2 PIN 4
#define BTN_ENC 49 // AUX3 PIN 7
#else
#define BTN_EN1 37
#define BTN_EN2 35
#define BTN_ENC 31 // the click
#endif
#if ENABLED(G3D_PANEL)
#define SD_DETECT_PIN 49
#else
#define SD_DETECT_PIN -1 // Ramps does not use this port
#endif
#endif
#else // old style panel with shift register
// arduino pin witch triggers an piezo beeper
#define ORIG_BEEPER_PIN 33 // No Beeper added
//buttons are attached to a shift register
// Not wired this yet
//#define SHIFT_CLK 38
//#define SHIFT_LD 42
//#define SHIFT_OUT 40
//#define SHIFT_EN 17
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#endif // NEWPANEL
#endif // ULTRA_LCD
// SPI for Max6675 Thermocouple
#define MAX6675_SS 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
MK/module/boards/BOARD_RAMPS_13_HHF.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 36
* RAMPS 1.3 / 1.4
* RAMPS_13_HHF (Hotend0, Hotend1, Fan)
****************************************************************************************/
#define KNOWN_BOARD
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
#endif
#define LARGE_FLASH true
// X axis pins
#define ORIG_X_STEP_PIN 54
#define ORIG_X_DIR_PIN 55
#define ORIG_X_ENABLE_PIN 38
#define ORIG_X_MIN_PIN 3
#define ORIG_X_MAX_PIN 2
// Y axis pins
#define ORIG_Y_STEP_PIN 60
#define ORIG_Y_DIR_PIN 61
#define ORIG_Y_ENABLE_PIN 56
#define ORIG_Y_MIN_PIN 14
#define ORIG_Y_MAX_PIN 15
#define Y2_STEP_PIN 36
#define Y2_DIR_PIN 34
#define Y2_ENABLE_PIN 30
// Z axis pins
#define ORIG_Z_STEP_PIN 46
#define ORIG_Z_DIR_PIN 48
#define ORIG_Z_ENABLE_PIN 62
#define ORIG_Z_MIN_PIN 18
#define ORIG_Z_MAX_PIN 19
#define Z2_STEP_PIN 36
#define Z2_DIR_PIN 34
#define Z2_ENABLE_PIN 30
// E axis pins
#define ORIG_E0_STEP_PIN 26
#define ORIG_E0_DIR_PIN 28
#define ORIG_E0_ENABLE_PIN 24
#define ORIG_E1_STEP_PIN 36
#define ORIG_E1_DIR_PIN 34
#define ORIG_E1_ENABLE_PIN 30
#define SDPOWER -1
#define SDSS 53
#define LED_PIN 13
#define ORIG_FAN_PIN 8
#define ORIG_PS_ON_PIN 12
#define ORIG_HEATER_0_PIN 10 // HOTEND 1
#define ORIG_HEATER_1_PIN 9 // HOTEND 2
#define ORIG_HEATER_2_PIN -1
#define ORIG_HEATER_3_PIN -1
#define ORIG_TEMP_0_PIN 13 // ANALOG NUMBERING
#define ORIG_TEMP_1_PIN 15 // ANALOG NUMBERING
#define ORIG_TEMP_2_PIN -1 // ANALOG NUMBERING
#define ORIG_TEMP_3_PIN -1 // ANALOG NUMBERING
#define ORIG_HEATER_BED_PIN 8 // BED
#define ORIG_TEMP_BED_PIN 14 // ANALOG NUMBERING
#if NUM_SERVOS > 0
#define SERVO0_PIN 11
#if NUM_SERVOS > 1
#define SERVO1_PIN 6
#if NUM_SERVOS > 2
#define SERVO2_PIN 5
#if NUM_SERVOS > 3
#define SERVO3_PIN 4
#endif
#endif
#endif
#endif
#if ENABLED(ULTRA_LCD)
#if ENABLED(NEWPANEL)
#if ENABLED(PANEL_ONE)
#define LCD_PINS_RS 40
#define LCD_PINS_ENABLE 42
#define LCD_PINS_D4 65
#define LCD_PINS_D5 66
#define LCD_PINS_D6 44
#define LCD_PINS_D7 64
#else
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#endif // PANEL_ONE
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#define ORIG_BEEPER_PIN 37
#define BTN_EN1 31
#define BTN_EN2 33
#define BTN_ENC 35
#define SD_DETECT_PIN 49
#elif ENABLED(LCD_I2C_PANELOLU2)
#define BTN_EN1 47 // reverse if the encoder turns the wrong way.
#define BTN_EN2 43
#define BTN_ENC 32
#define LCD_SDSS 53
#define SD_DETECT_PIN -1
#define KILL_PIN 41
#elif ENABLED(LCD_I2C_VIKI)
#define BTN_EN1 22 // reverse if the encoder turns the wrong way.
#define BTN_EN2 7
#define BTN_ENC -1
#define LCD_SDSS 53
#define SD_DETECT_PIN 49
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
#define BTN_EN1 35 // reverse if the encoder turns the wrong way.
#define BTN_EN2 37
#define BTN_ENC 31
#define SD_DETECT_PIN 49
#define LCD_SDSS 53
#define KILL_PIN 41
#define ORIG_BEEPER_PIN 23
#define DOGLCD_CS 29
#define DOGLCD_A0 27
#define LCD_PIN_BL 33
#else
// arduino pin which triggers an piezzo beeper
#define ORIG_BEEPER_PIN 33 // Beeper on AUX-4
// buttons are directly attached using AUX-2
#if ENABLED(REPRAPWORLD_KEYPAD)
#define BTN_EN1 64 // encoder
#define BTN_EN2 59 // encoder
#define BTN_ENC 63 // enter button
#define SHIFT_OUT 40 // shift register
#define SHIFT_CLK 44 // shift register
#define SHIFT_LD 42 // shift register
#elif ENABLED(PANEL_ONE)
#define BTN_EN1 59 // AUX2 PIN 3
#define BTN_EN2 63 // AUX2 PIN 4
#define BTN_ENC 49 // AUX3 PIN 7
#else
#define BTN_EN1 37
#define BTN_EN2 35
#define BTN_ENC 31 // the click
#endif
#if ENABLED(G3D_PANEL)
#define SD_DETECT_PIN 49
#else
#define SD_DETECT_PIN -1 // Ramps does not use this port
#endif
#endif
#else // old style panel with shift register
// arduino pin witch triggers an piezo beeper
#define ORIG_BEEPER_PIN 33 // No Beeper added
// buttons are attached to a shift register
// Not wired this yet
//#define SHIFT_CLK 38
//#define SHIFT_LD 42
//#define SHIFT_OUT 40
//#define SHIFT_EN 17
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#endif // NEWPANEL
#endif // ULTRA_LCD
// SPI for Max6675 Thermocouple
#define MAX6675_SS 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
MK/module/boards/BOARD_RAMPS_13_HHH.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 37
* RAMPS 1.3 / 1.4
* RAMPS_13_HHH (Hotend0, Hotend1, Hotend2)
****************************************************************************************/
#define KNOWN_BOARD
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
#endif
#define LARGE_FLASH true
// X axis pins
#define ORIG_X_STEP_PIN 54
#define ORIG_X_DIR_PIN 55
#define ORIG_X_ENABLE_PIN 38
#define ORIG_X_MIN_PIN 3
#define ORIG_X_MAX_PIN 2
// Y axis pins
#define ORIG_Y_STEP_PIN 60
#define ORIG_Y_DIR_PIN 61
#define ORIG_Y_ENABLE_PIN 56
#define ORIG_Y_MIN_PIN 14
#define ORIG_Y_MAX_PIN 15
#define Y2_STEP_PIN 36
#define Y2_DIR_PIN 34
#define Y2_ENABLE_PIN 30
// Z axis pins
#define ORIG_Z_STEP_PIN 46
#define ORIG_Z_DIR_PIN 48
#define ORIG_Z_ENABLE_PIN 62
#define ORIG_Z_MIN_PIN 18
#define ORIG_Z_MAX_PIN 19
#define Z2_STEP_PIN 36
#define Z2_DIR_PIN 34
#define Z2_ENABLE_PIN 30
// E axis pins
#define ORIG_E0_STEP_PIN 26
#define ORIG_E0_DIR_PIN 28
#define ORIG_E0_ENABLE_PIN 24
#define ORIG_E1_STEP_PIN 36
#define ORIG_E1_DIR_PIN 34
#define ORIG_E1_ENABLE_PIN 30
#define SDPOWER -1
#define SDSS 53
#define LED_PIN 13
#define ORIG_FAN_PIN 8
#define ORIG_PS_ON_PIN 12
#define ORIG_HEATER_0_PIN 10 // HOTEND 1
#define ORIG_HEATER_1_PIN 9 // HOTEND 2
#define ORIG_HEATER_2_PIN 8 // HOTEND 3
#define ORIG_HEATER_3_PIN -1
#define ORIG_TEMP_0_PIN 13 // ANALOG NUMBERING
#define ORIG_TEMP_1_PIN 15 // ANALOG NUMBERING
#define ORIG_TEMP_2_PIN 14 // ANALOG NUMBERING
#define ORIG_TEMP_3_PIN -1 // ANALOG NUMBERING
#define ORIG_HEATER_BED_PIN -1 // BED
#define ORIG_TEMP_BED_PIN -1 // ANALOG NUMBERING
#if NUM_SERVOS > 0
#define SERVO0_PIN 11
#if NUM_SERVOS > 1
#define SERVO1_PIN 6
#if NUM_SERVOS > 2
#define SERVO2_PIN 5
#if NUM_SERVOS > 3
#define SERVO3_PIN 4
#endif
#endif
#endif
#endif
#if ENABLED(ULTRA_LCD)
#if ENABLED(NEWPANEL)
#if ENABLED(PANEL_ONE)
#define LCD_PINS_RS 40
#define LCD_PINS_ENABLE 42
#define LCD_PINS_D4 65
#define LCD_PINS_D5 66
#define LCD_PINS_D6 44
#define LCD_PINS_D7 64
#else
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#endif // PANEL_ONE
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#define ORIG_BEEPER_PIN 37
#define BTN_EN1 31
#define BTN_EN2 33
#define BTN_ENC 35
#define SD_DETECT_PIN 49
#elif ENABLED(LCD_I2C_PANELOLU2)
#define BTN_EN1 47 // reverse if the encoder turns the wrong way.
#define BTN_EN2 43
#define BTN_ENC 32
#define LCD_SDSS 53
#define SD_DETECT_PIN -1
#define KILL_PIN 41
#elif ENABLED(LCD_I2C_VIKI)
#define BTN_EN1 22 // reverse if the encoder turns the wrong way.
#define BTN_EN2 7
#define BTN_ENC -1
#define LCD_SDSS 53
#define SD_DETECT_PIN 49
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
#define BTN_EN1 35 // reverse if the encoder turns the wrong way.
#define BTN_EN2 37
#define BTN_ENC 31
#define SD_DETECT_PIN 49
#define LCD_SDSS 53
#define KILL_PIN 41
#define ORIG_BEEPER_PIN 23
#define DOGLCD_CS 29
#define DOGLCD_A0 27
#define LCD_PIN_BL 33
#else
// arduino pin which triggers an piezzo beeper
#define ORIG_BEEPER_PIN 33 // Beeper on AUX-4
// buttons are directly attached using AUX-2
#if ENABLED(REPRAPWORLD_KEYPAD)
#define BTN_EN1 64 // encoder
#define BTN_EN2 59 // encoder
#define BTN_ENC 63 // enter button
#define SHIFT_OUT 40 // shift register
#define SHIFT_CLK 44 // shift register
#define SHIFT_LD 42 // shift register
#elif ENABLED(PANEL_ONE)
#define BTN_EN1 59 // AUX2 PIN 3
#define BTN_EN2 63 // AUX2 PIN 4
#define BTN_ENC 49 // AUX3 PIN 7
#else
#define BTN_EN1 37
#define BTN_EN2 35
#define BTN_ENC 31 // the click
#endif
#if ENABLED(G3D_PANEL)
#define SD_DETECT_PIN 49
#else
#define SD_DETECT_PIN -1 // Ramps does not use this port
#endif
#endif
#else // old style panel with shift register
// arduino pin witch triggers an piezo beeper
#define ORIG_BEEPER_PIN 33 // No Beeper added
// buttons are attached to a shift register
// Not wired this yet
//#define SHIFT_CLK 38
//#define SHIFT_LD 42
//#define SHIFT_OUT 40
//#define SHIFT_EN 17
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#endif // NEWPANEL
#endif // ULTRA_LCD
// SPI for Max6675 Thermocouple
#define MAX6675_SS 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
MK/module/boards/BOARD_RAMPS_FD.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 403 - 404
* Arduino pin assignment
* Ramps - FD v1 & v2
****************************************************************************************/
#define KNOWN_BOARD
#ifndef __SAM3X8E__
#error Oops! Make sure you have 'Arduino Due' selected from the 'Tools -> Boards' menu.
#endif
#if MB(RAMPS_FD_V1)
#define RAMPS_FD_V1
#define INVERTED_HEATER_PINS
#define INVERTED_BED_PINS
// No EEPROM
// Use 4k7 thermistor tables
#else
#define RAMPS_FD_V2
// EEPROM supported
// Use 1k thermistor tables
#endif
#define ORIG_X_STEP_PIN 63
#define ORIG_X_DIR_PIN 62
#define ORIG_X_ENABLE_PIN 48
#define ORIG_X_MIN_PIN 22
#define ORIG_X_MAX_PIN 30
#define ORIG_Y_STEP_PIN 65
#define ORIG_Y_DIR_PIN 64
#define ORIG_Y_ENABLE_PIN 46
#define ORIG_Y_MIN_PIN 24
#define ORIG_Y_MAX_PIN 38
#define ORIG_Z_STEP_PIN 67
#define ORIG_Z_DIR_PIN 66
#define ORIG_Z_ENABLE_PIN 44
#define ORIG_Z_MIN_PIN 26
#define ORIG_Z_MAX_PIN 34
#define ORIG_E0_STEP_PIN 36
#define ORIG_E0_DIR_PIN 28
#define ORIG_E0_ENABLE_PIN 42
#define ORIG_E1_STEP_PIN 43
#define ORIG_E1_DIR_PIN 41
#define ORIG_E1_ENABLE_PIN 39
#define ORIG_E2_STEP_PIN 32
#define ORIG_E2_DIR_PIN 47
#define ORIG_E2_ENABLE_PIN 45
#define SDPOWER -1
#define SDSS 4
#define LED_PIN 13
#define ORIG_BEEPER_PIN -1
#define ORIG_FAN_PIN -1
#define CONTROLLER_FAN_PIN -1
#define ORIG_PS_ON_PIN -1
#define KILL_PIN -1
#define ORIG_HEATER_BED_PIN 8 // BED
#define ORIG_HEATER_0_PIN 9
#define ORIG_HEATER_1_PIN 10
#define ORIG_HEATER_2_PIN 11
#define ORIG_TEMP_BED_PIN 0 // ANALOG NUMBERING
#define ORIG_TEMP_0_PIN 1 // ANALOG NUMBERING
#define ORIG_TEMP_1_PIN 2 // ANALOG NUMBERING
#define ORIG_TEMP_2_PIN 3 // ANALOG NUMBERING
#define ORIG_TEMP_3_PIN 4 // ANALOG NUMBERING
#if NUM_SERVOS > 0
#define SERVO0_PIN 7
#if NUM_SERVOS > 1
#define SERVO1_PIN 6
#if NUM_SERVOS > 2
#define SERVO2_PIN 5
#if NUM_SERVOS > 3
#define SERVO3_PIN 3
#endif
#endif
#endif
#endif
#if ENABLED(ULTRA_LCD)
#if ENABLED(NEWPANEL)
// ramps-fd lcd adaptor
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#define ORIG_BEEPER_PIN 37
#define BTN_EN1 33
#define BTN_EN2 31
#define BTN_ENC 35
#define SD_DETECT_PIN 49
#endif
#endif
#endif //ULTRA_LCD
// SPI for Max6675 Thermocouple
#define MAX6675_SS 53
MK/module/boards/BOARD_RAMPS_OLD.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 3
* RAMPS OLD
****************************************************************************************/
#define KNOWN_BOARD 1
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
#endif
// Uncomment the following line for RAMPS v1.0
//#define RAMPS_V_1_0
#define ORIG_X_STEP_PIN 26
#define ORIG_X_DIR_PIN 28
#define ORIG_X_ENABLE_PIN 24
#define ORIG_X_MIN_PIN 3
#define ORIG_X_MAX_PIN 2
#define ORIG_Y_STEP_PIN 38
#define ORIG_Y_DIR_PIN 40
#define ORIG_Y_ENABLE_PIN 36
#define ORIG_Y_MIN_PIN 16
#define ORIG_Y_MAX_PIN 17
#define ORIG_Z_STEP_PIN 44
#define ORIG_Z_DIR_PIN 46
#define ORIG_Z_ENABLE_PIN 42
#define ORIG_Z_MIN_PIN 18
#define ORIG_Z_MAX_PIN 19
#define ORIG_E0_STEP_PIN 32
#define ORIG_E0_DIR_PIN 34
#define ORIG_E0_ENABLE_PIN 30
#define SDPOWER 48
#define SDSS 53
#define LED_PIN 13
#define ORIG_PS_ON_PIN -1
#define KILL_PIN -1
#if ENABLED(RAMPS_V_1_0) // RAMPS_V_1_0
#define ORIG_HEATER_0_PIN 12 // RAMPS 1.0
#define ORIG_HEATER_BED_PIN -1 // RAMPS 1.0
#define ORIG_FAN_PIN 11 // RAMPS 1.0
#else // RAMPS_V_1_1 or RAMPS_V_1_2
#define ORIG_HEATER_0_PIN 10 // RAMPS 1.1
#define ORIG_HEATER_BED_PIN 8 // RAMPS 1.1
#define ORIG_FAN_PIN 9 // RAMPS 1.1
#endif
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_TEMP_0_PIN 2 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define ORIG_TEMP_1_PIN -1
#define ORIG_TEMP_2_PIN -1
#define ORIG_TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
// SPI for Max6675 Thermocouple
#if DISABLED(SDSUPPORT)
#define MAX6675_SS 66 // Do not use pin 53 if there is even the remote possibility of using Display/SD card
#else
#define MAX6675_SS 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
#endif
MK/module/boards/BOARD_RUMBA.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 80
* RUMBA
****************************************************************************************/
#define KNOWN_BOARD 1
#ifndef __AVR_ATmega2560__
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
#endif
#define ORIG_X_STEP_PIN 17
#define ORIG_X_DIR_PIN 16
#define ORIG_X_ENABLE_PIN 48
#define ORIG_X_MIN_PIN 37
#define ORIG_X_MAX_PIN 36
#define ORIG_Y_STEP_PIN 54
#define ORIG_Y_DIR_PIN 47
#define ORIG_Y_ENABLE_PIN 55
#define ORIG_Y_MIN_PIN 35
#define ORIG_Y_MAX_PIN 34
#define Y2_STEP_PIN 26
#define Y2_DIR_PIN 25
#define Y2_ENABLE_PIN 27
#define ORIG_Z_STEP_PIN 57
#define ORIG_Z_DIR_PIN 56
#define ORIG_Z_ENABLE_PIN 62
#define ORIG_Z_MIN_PIN 33
#define ORIG_Z_MAX_PIN 32
#define Z2_STEP_PIN 26
#define Z2_DIR_PIN 25
#define Z2_ENABLE_PIN 27
#define ORIG_E0_STEP_PIN 23
#define ORIG_E0_DIR_PIN 22
#define ORIG_E0_ENABLE_PIN 24
#define ORIG_E1_STEP_PIN 26
#define ORIG_E1_DIR_PIN 25
#define ORIG_E1_ENABLE_PIN 27
#define ORIG_E2_STEP_PIN 29
#define ORIG_E2_DIR_PIN 28
#define ORIG_E2_ENABLE_PIN 39
#define LED_PIN 13
#define ORIG_FAN_PIN 7
//additional FAN1 PIN (e.g. useful for electronics fan or light on/off) on PIN 8
#define ORIG_PS_ON_PIN 45
#define KILL_PIN 46
#if (TEMP_SENSOR_0==0)
#define ORIG_TEMP_0_PIN -1
#define ORIG_HEATER_0_PIN -1
#else
#define ORIG_HEATER_0_PIN 2 // EXTRUDER 1
#if (TEMP_SENSOR_0==-1)
#define ORIG_TEMP_0_PIN 6 // ANALOG NUMBERING - connector *K1* on RUMBA thermocouple ADD ON is used
#else
#define ORIG_TEMP_0_PIN 15 // ANALOG NUMBERING - default connector for thermistor *T0* on rumba board is used
#endif
#endif
#if (TEMP_SENSOR_1==0)
#define ORIG_TEMP_1_PIN -1
#define ORIG_HEATER_1_PIN -1
#else
#define ORIG_HEATER_1_PIN 3 // EXTRUDER 2
#if (TEMP_SENSOR_1==-1)
#define ORIG_TEMP_1_PIN 5 // ANALOG NUMBERING - connector *K2* on RUMBA thermocouple ADD ON is used
#else
#define ORIG_TEMP_1_PIN 14 // ANALOG NUMBERING - default connector for thermistor *T1* on rumba board is used
#endif
#endif
#if (TEMP_SENSOR_2==0)
#define ORIG_TEMP_2_PIN -1
#define ORIG_HEATER_2_PIN -1
#else
#define ORIG_HEATER_2_PIN 6 // EXTRUDER 3
#if (TEMP_SENSOR_2==-1)
#define ORIG_TEMP_2_PIN 7 // ANALOG NUMBERING - connector *K3* on RUMBA thermocouple ADD ON is used <-- this can not be used when TEMP_SENSOR_BED is defined as thermocouple
#else
#define ORIG_TEMP_2_PIN 13 // ANALOG NUMBERING - default connector for thermistor *T2* on rumba board is used
#endif
#endif
//optional for extruder 4 or chamber: #define TEMP_X_PIN 12 // ANALOG NUMBERING - default connector for thermistor *T3* on rumba board is used
//optional FAN1 can be used as 4th heater output: #define ORIG_HEATER_3_PIN 8 // EXTRUDER 4
#if (TEMP_SENSOR_BED==0)
#define ORIG_TEMP_BED_PIN -1
#define ORIG_HEATER_BED_PIN -1
#else
#define ORIG_HEATER_BED_PIN 9 // BED
#if (TEMP_SENSOR_BED==-1)
#define ORIG_TEMP_BED_PIN 7 // ANALOG NUMBERING - connector *K3* on RUMBA thermocouple ADD ON is used <-- this can not be used when TEMP_SENSOR_2 is defined as thermocouple
#else
#define ORIG_TEMP_BED_PIN 11 // ANALOG NUMBERING - default connector for thermistor *THB* on rumba board is used
#endif
#endif
#define SDPOWER -1
#define SDSS 53
#define SD_DETECT_PIN 49
#define ORIG_BEEPER_PIN 44
#define LCD_PINS_RS 19
#define LCD_PINS_ENABLE 42
#define LCD_PINS_D4 18
#define LCD_PINS_D5 38
#define LCD_PINS_D6 41
#define LCD_PINS_D7 40
#define BTN_EN1 11
#define BTN_EN2 12
#define BTN_ENC 43
MK/module/boards/BOARD_SANGUINO.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 6 - 62 - 63 - 64 - 65
* 6 - Sanguinololu <1.2
* 62 - Sanguinololu 1.2 and above
* 63 - Melzi
* 64 - STB 1.1
* 65 - Azteeg X1
* 66 - MELZI 1284
****************************************************************************************/
#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega1284P__)
#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
#endif
#define KNOWN_BOARD 1
#if !MB(SANGUINOLOLU_11)
#define SANGUINOLOLU_V_1_2
#endif
#if defined(__AVR_ATmega1284P__)
#define LARGE_FLASH true
#endif
#define ORIG_X_STEP_PIN 15
#define ORIG_X_DIR_PIN 21
#define X_STOP_PIN 18
#define ORIG_Y_STEP_PIN 22
#define ORIG_Y_DIR_PIN 23
#define Y_STOP_PIN 19
#define ORIG_Z_STEP_PIN 3
#define ORIG_Z_DIR_PIN 2
#define Z_STOP_PIN 20
#define ORIG_E0_STEP_PIN 1
#define ORIG_E0_DIR_PIN 0
#define LED_PIN -1
#define ORIG_FAN_PIN -1
#if ORIG_FAN_PIN == 12 || ORIG_FAN_PIN ==13
#define FAN_SOFT_PWM
#endif
#if MB(AZTEEG_X1) || MB(STB_11) || MB(MELZI)
#define ORIG_FAN_PIN 4 // Works for Panelolu2 too
#if MB(MELZI)
#define LED_PIN 27
#elif MB(STB_11)
#define LCD_PIN_BL 17 // LCD backlight LED
#endif
#endif
#if NUM_SERVOS > 0
#define SERVO0_PIN -1
#if NUM_SERVOS > 1
#define SERVO1_PIN -1
#if NUM_SERVOS > 2
#define SERVO2_PIN -1
#if NUM_SERVOS > 3
#define SERVO3_PIN -1
#endif
#endif
#endif
#endif
#define ORIG_PS_ON_PIN -1
#define KILL_PIN -1
#define ORIG_HEATER_0_PIN 13 // (extruder)
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#if ENABLED(SANGUINOLOLU_V_1_2)
#define ORIG_HEATER_BED_PIN 12 // (bed)
#define ORIG_X_ENABLE_PIN 14
#define ORIG_Y_ENABLE_PIN 14
#define ORIG_Z_ENABLE_PIN 26
#define ORIG_E0_ENABLE_PIN 14
#if ENABLED(LCD_I2C_PANELOLU2)
#define ORIG_FAN_PIN 4 // Uses Transistor1 (PWM) on Panelolu2's Sanguino Adapter Board to drive the fan
#endif
#else
#define ORIG_HEATER_BED_PIN 14 // (bed)
#define ORIG_X_ENABLE_PIN -1
#define ORIG_Y_ENABLE_PIN -1
#define ORIG_Z_ENABLE_PIN -1
#define ORIG_E0_ENABLE_PIN -1
#endif
#define ORIG_TEMP_0_PIN 7 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 33 extruder)
#define ORIG_TEMP_1_PIN -1
#define ORIG_TEMP_2_PIN -1
#define ORIG_TEMP_BED_PIN 6 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed)
#define SDPOWER -1
#define SDSS 31
/**
* On some broken versions of the Sanguino libraries the pin definitions are wrong,
* which then needs SDSS as pin 24. But you should upgrade your Sanguino libraries! See #368.
*/
//#define SDSS 24
#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
// No buzzer installed
#define ORIG_BEEPER_PIN -1
//LCD Pins
#if ENABLED(DOGLCD)
#if ENABLED(U8GLIB_ST7920) //SPI GLCD 12864 ST7920 ( like [www.digole.com] ) For Melzi V2.0
#if MB(MELZI) // Melzi board
#define LCD_PINS_RS 30 //CS chip select /SS chip slave select
#define LCD_PINS_ENABLE 29 //SID (MOSI)
#define LCD_PINS_D4 17 //SCK (CLK) clock
#define ORIG_BEEPER_PIN 27 // Pin 27 is taken by LED_PIN, but Melzi LED does nothing with Marlin so this can be used for ORIG_BEEPER_PIN. You can use this pin with M42 instead of ORIG_BEEPER_PIN.
#else // Sanguinololu 1.3
#define LCD_PINS_RS 4
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 30
#define LCD_PINS_D5 29
#define LCD_PINS_D6 28
#define LCD_PINS_D7 27
#endif
#else // DOGM SPI LCD Support
#define DOGLCD_A0 30
#define DOGLCD_CS 29
#define LCD_CONTRAST 1
#endif
// Uncomment screen orientation
#define LCD_SCREEN_ROT_0
//#define LCD_SCREEN_ROT_90
//#define LCD_SCREEN_ROT_180
//#define LCD_SCREEN_ROT_270
#else // !DOGLCD - Standard Hitachi LCD controller
#define LCD_PINS_RS 4
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 30
#define LCD_PINS_D5 29
#define LCD_PINS_D6 28
#define LCD_PINS_D7 27
#endif // !DOGLCD
//The encoder and click button
#define BTN_EN1 11
#define BTN_EN2 10
#if ENABLED(LCD_I2C_PANELOLU2)
#if MB(MELZI)
#define BTN_ENC 29
#define LCD_SDSS 30 // Panelolu2 SD card reader rather than the Melzi
#else
#define BTN_ENC 30
#endif
#else
#define BTN_ENC 16
#define LCD_SDSS 28 // Smart Controller SD card reader rather than the Melzi
#endif //Panelolu2
#define SD_DETECT_PIN -1
#elif ENABLED(MAKRPANEL)
#define ORIG_BEEPER_PIN 29
// Pins for DOGM SPI LCD Support
#define DOGLCD_A0 30
#define DOGLCD_CS 17
#define LCD_PIN_BL 28 // backlight LED on PA3
// GLCD features
#define LCD_CONTRAST 1
// Uncomment screen orientation
#define LCD_SCREEN_ROT_0
//#define LCD_SCREEN_ROT_90
//#define LCD_SCREEN_ROT_180
//#define LCD_SCREEN_ROT_270
//The encoder and click button
#define BTN_EN1 11
#define BTN_EN2 10
#define BTN_ENC 16
#define SD_DETECT_PIN -1
#endif // MAKRPANEL
MK/module/boards/BOARD_SAV_MKI.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 83
* SAV MkI pin assignments (AT90USB1286)
* Requires the Teensyduino software with Teensy++ 2.0 selected in Arduino IDE!
* http://www.pjrc.com/teensy/teensyduino.html
* RepRap Clone Wars project board.
****************************************************************************************/
#define KNOWN_BOARD 1
#define AT90USB 1286 // Disable MarlinSerial etc.
#ifndef __AVR_AT90USB1286__
#error Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu.
#endif
#define LARGE_FLASH true
#define ORIG_X_STEP_PIN 0
#define ORIG_X_DIR_PIN 1
#define ORIG_X_ENABLE_PIN 39
#define ORIG_Y_STEP_PIN 2
#define ORIG_Y_DIR_PIN 3
#define ORIG_Y_ENABLE_PIN 38
#define ORIG_Z_STEP_PIN 4
#define ORIG_Z_DIR_PIN 5
#define ORIG_Z_ENABLE_PIN 23
#define ORIG_E0_STEP_PIN 6
#define ORIG_E0_DIR_PIN 7
#define ORIG_E0_ENABLE_PIN 19
#define ORIG_HEATER_0_PIN 21 // Extruder
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_HEATER_BED_PIN 20 // Bed
#define ORIG_FAN_PIN 16 // Fan -- from Teensyduino environment.
// For the fan and Teensyduino uses a different pin mapping.
#define X_STOP_PIN 13
#define Y_STOP_PIN 14
#define Z_STOP_PIN 15
//#define Z_STOP_PIN 36 // For inductive sensor.
#define ORIG_TEMP_0_PIN 7 // Extruder / Analog pin numbering
#define ORIG_TEMP_BED_PIN 6 // Bed / Analog pin numbering
#define ORIG_TEMP_1_PIN -1
#define ORIG_TEMP_2_PIN -1
#define SDPOWER -1
#define SDSS 20 // PB0 - 8 in marlin env.
#define LED_PIN -1
#define ORIG_PS_ON_PIN -1
#define ALARM_PIN -1
#define SD_DETECT_PIN -1
#define ORIG_BEEPER_PIN -1
#define LCD_PINS_RS -1
#define LCD_PINS_ENABLE -1
#define LCD_PINS_D4 -1
#define LCD_PINS_D5 -1
#define LCD_PINS_D6 -1
#define LCD_PINS_D7 -1
#if ENABLED(SAV_3DLCD)
// For LCD SHIFT register LCD
#define SR_DATA_PIN 1
#define SR_CLK_PIN 0
#define BTN_EN1 41
#define BTN_EN2 40
#define BTN_ENC 12
#define KILL_PIN 42 // A2 = 42 - teensy = 40
#define HOME_PIN -1 // A4 = marlin 44 - teensy = 42
#if NUM_SERVOS > 0
#define SERVO0_PIN 41 // In teensy's pin definition for pinMode (in Servo.cpp)
#endif
#endif
MK/module/boards/BOARD_SETHI.h 0 → 100644
View file @ b3267d28
/****************************************************************************************
* 20
* Sethi 3D_1 pin assignment - www.sethi3d.com.br
****************************************************************************************/
#define KNOWN_BOARD
#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__)
#error Oops! Make sure you have 'Sethi 3D' selected from the 'Tools -> Boards' menu.
#endif
#if DISABLED(GEN7_VERSION)
#define GEN7_VERSION 12 // v1.x
#endif
// X axis pins
#define ORIG_X_STEP_PIN 19
#define ORIG_X_DIR_PIN 18
#define ORIG_X_ENABLE_PIN 24
#define X_STOP_PIN 2
// Y axis pins
#define ORIG_Y_STEP_PIN 23
#define ORIG_Y_DIR_PIN 22
#define ORIG_Y_ENABLE_PIN 24
#define Y_STOP_PIN 0
// Z axis pins
#define ORIG_Z_STEP_PIN 26
#define ORIG_Z_DIR_PIN 25
#define ORIG_Z_ENABLE_PIN 24
#define ORIG_Z_MIN_PIN 1
#define ORIG_Z_MAX_PIN 0
// Extruder pins
#define ORIG_E0_STEP_PIN 28
#define ORIG_E0_DIR_PIN 27
#define ORIG_E0_ENABLE_PIN 24
#define ORIG_TEMP_0_PIN 1
#define ORIG_TEMP_1_PIN -1
#define ORIG_TEMP_2_PIN -1
#define ORIG_TEMP_BED_PIN 2
#define ORIG_HEATER_0_PIN 4
#define ORIG_HEATER_1_PIN -1
#define ORIG_HEATER_2_PIN -1
#define ORIG_HEATER_BED_PIN 3
#define KILL_PIN -1
#define SDPOWER -1
#define SDSS -1 // SCL pin of I2C header
#define LED_PIN -1
#if (GEN7_VERSION >= 13)
// Gen7 v1.3 removed the fan pin
#define ORIG_FAN_PIN -1
#else
#define ORIG_FAN_PIN 31
#endif
#define ORIG_PS_ON_PIN 15
//All these generations of Gen7 supply thermistor power
//via PS_ON, so ignore bad thermistor readings
#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
//our pin for debugging.
#define DEBUG_PIN 0
//our RS485 pins
#define TORIG_X_ENABLE_PIN 12
#define RORIG_X_ENABLE_PIN 13
MK/module/boards/BOARD_SMART_RAMPS.h 0 → 100644
View file @ b3267d28
This diff is collapsed.
MK/module/boards/BOARD_TEENSY2.h 0 → 100644
View file @ b3267d28
This diff is collapsed.
MK/module/boards/BOARD_TEENSYLU.h 0 → 100644
View file @ b3267d28
This diff is collapsed.
MK/module/boards/BOARD_ULTIMAIN_2.h 0 → 100644
View file @ b3267d28
This diff is collapsed.
MK/module/boards/BOARD_ULTIMAKER.h 0 → 100644
View file @ b3267d28
This diff is collapsed.
MK/module/boards/BOARD_ULTIMAKER_OLD.h 0 → 100644
View file @ b3267d28
This diff is collapsed.
MK/module/boards/BOARD_ULTRATRONICS.h 0 → 100644
View file @ b3267d28
This diff is collapsed.
MK/module/conditionals.h
View file @ b3267d28
......@@ -227,7 +227,7 @@
#endif
#endif
#include "../Pins.h"
#include "pins.h"
/**
* SAM3X8E
......
MK/module/lcd/buzzer.cpp
View file @ b3267d28
This diff is collapsed.
MK/module/lcd/dogm_lcd_implementation.h
View file @ b3267d28
This diff is collapsed.
MK/module/lcd/ultralcd.cpp
View file @ b3267d28
This diff is collapsed.
MK/module/lcd/ultralcd.h
View file @ b3267d28
This diff is collapsed.
MK/module/lcd/ultralcd_st7920_u8glib_rrd.h
View file @ b3267d28
This diff is collapsed.
MK/module/macros.h
View file @ b3267d28
This diff is collapsed.
MK/module/motion/planner.cpp
View file @ b3267d28
This diff is collapsed.
MK/module/motion/stepper.cpp
View file @ b3267d28
This diff is collapsed.
MK/module/motion/stepper.h
View file @ b3267d28
This diff is collapsed.
MK/module/motion/stepper_indirection.h
View file @ b3267d28
This diff is collapsed.
MK/module/pins.h 0 → 100644
View file @ b3267d28
This diff is collapsed.
MK/module/sanitycheck.h
View file @ b3267d28
This diff is collapsed.
MK/module/temperature/temperature.cpp
View file @ b3267d28
This diff is collapsed.
README.md
View file @ b3267d28
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment