Update 4.2.5

MK/module/MK_Main.cpp

@@ -5637,15 +5637,10 @@ inline void gcode_M221() {
  * M222: Set density extrusion percentage (M222 T0 S95)
  */
 inline void gcode_M222() {
-  if (code_seen('S')) {
-    int sval = code_value();
-    if (code_seen('T')) {
   if (setTargetedExtruder(222)) return;
-      density_multiplier[target_extruder] = sval;
-    }
-    else {
-      density_multiplier[active_extruder] = sval;
-    }
+
+  if (code_seen('S')) {
+    density_multiplier[target_extruder] = code_value();
   }
 }
 

MK/module/conditionals.h

@@ -55,6 +55,12 @@
   #define REPRAP_DISCOUNT_SMART_CONTROLLER
 #endif
 
+#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
+  #if DISABLED(SDSUPPORT)
+    #define SDSUPPORT
+  #endif
+#endif
+
 #if ENABLED(ULTIMAKERCONTROLLER) || ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) || ENABLED(G3D_PANEL) || ENABLED(RIGIDBOT_PANEL)
   #define ULTIPANEL
   #define NEWPANEL
@@ -375,6 +381,24 @@
   #define MIN_PROBE_Y (max(Y_MIN_POS, Y_MIN_POS + Y_PROBE_OFFSET_FROM_EXTRUDER))
   #define MAX_PROBE_Y (min(Y_MAX_POS, Y_MAX_POS + Y_PROBE_OFFSET_FROM_EXTRUDER))
 
+  // Make sure probing points are reachable
+  #if LEFT_PROBE_BED_POSITION < MIN_PROBE_X
+    #undef LEFT_PROBE_BED_POSITION
+    #define LEFT_PROBE_BED_POSITION   MIN_PROBE_X
+  #endif
+  #if RIGHT_PROBE_BED_POSITION > MAX_PROBE_X
+    #undef RIGHT_PROBE_BED_POSITION
+    #define RIGHT_PROBE_BED_POSITION  MAX_PROBE_X
+  #endif
+  #if FRONT_PROBE_BED_POSITION < MIN_PROBE_Y
+    #undef FRONT_PROBE_BED_POSITION
+    #define FRONT_PROBE_BED_POSITION  MIN_PROBE_Y
+  #endif
+  #if BACK_PROBE_BED_POSITION > MAX_PROBE_Y
+    #undef BACK_PROBE_BED_POSITION
+    #define BACK_PROBE_BED_POSITION   MAX_PROBE_Y
+  #endif
+
   // Z_RAISE_AFTER_PROBING is not for all probes. Be sure that it is zero in that cases
   #if DISABLED(ENABLE_SERVOS) && DISABLED(Z_PROBE_SLED)
     #undef Z_RAISE_AFTER_PROBING

MK/module/language/language.h

@@ -61,7 +61,7 @@
 
 // Serial Console Messages (do not translate those!)
 #if MECH(CARTESIAN)
-  #define SERIAL_M115_REPORT                    "FIRMWARE_NAME:" BUILD_VERSION " FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:Mendel EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
+  #define SERIAL_M115_REPORT                    "FIRMWARE_NAME:" BUILD_VERSION " FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:Cartesian EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
 #elif MECH(COREXY)
   #define SERIAL_M115_REPORT                    "FIRMWARE_NAME:" BUILD_VERSION " FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:Core_XY EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
 #elif MECH(COREXZ)

MK/module/nextion/Nextion_gfx.h

@@ -61,30 +61,16 @@
         }
 
         void clear() {
-          float zero[3] = {}, old_origin[3];
+          float zero[3] = {};
           fill(_left, _top, _width, _height, _color[VC_BACKGROUND]);
 
-          memcpy(old_origin, _origin, sizeof(_origin));
-          memcpy(_origin, zero, sizeof(_origin));
-
           for (int i = 0; i < 3; i++) {
             float pos[3] = {};
             pos[i] = _max[i];
             cursor_to(zero);
             line_to(VC_AXIS + i, pos);
           }
-          cursor_to(0, 0, _max[Z_AXIS]);
-          line_to(VC_AXIS + Y_AXIS, 0, _max[Y_AXIS], _max[Z_AXIS]);
-          line_to(VC_AXIS + Z_AXIS, 0, _max[Y_AXIS], 0);
-          line_to(VC_AXIS + X_AXIS, _max[X_AXIS], _max[Y_AXIS], 0);
-          line_to(VC_AXIS + Z_AXIS, _max[X_AXIS], _max[Y_AXIS], _max[Z_AXIS]);
-          line_to(VC_AXIS + Y_AXIS, _max[X_AXIS], 0, _max[Z_AXIS]);
-          line_to(VC_AXIS + Z_AXIS, _max[X_AXIS], 0, 0);
-          line_to(VC_AXIS + Y_AXIS, _max[X_AXIS], _max[Y_AXIS], 0);
-          cursor_to(0, 0, _max[Z_AXIS]);
-          line_to(VC_AXIS + X_AXIS, _max[X_AXIS], 0, _max[Z_AXIS]);
-
-          memcpy(_origin, old_origin, sizeof(_origin));
+          cursor_to(zero);
         }
 
         void clear(float scale) {

MK/module/nextion/Nextion_lcd.cpp

@@ -625,10 +625,10 @@
           if (card.sdprinting) {
             // Progress bar solid part
             sdbar.setValue(card.percentDone());
-            NPlay.setPic(38);
+            NPlay.setPic(40);
           }
           else {
-            NPlay.setPic(40);
+            NPlay.setPic(38);
           }
         }
 

MK/module/sanitycheck.h

@@ -1480,17 +1480,6 @@
       #elif FRONT_PROBE_BED_POSITION > BACK_PROBE_BED_POSITION
         #error CONFLICT ERROR: FRONT_PROBE_BED_POSITION must be less than BACK_PROBE_BED_POSITION.
       #endif
-      // Make sure probing points are reachable
-      #if LEFT_PROBE_BED_POSITION < MIN_PROBE_X
-        #error CONFLICT ERROR: "The given LEFT_PROBE_BED_POSITION can't be reached by the probe."
-      #elif RIGHT_PROBE_BED_POSITION > MAX_PROBE_X
-        #error CONFLICT ERROR: "The given RIGHT_PROBE_BED_POSITION can't be reached by the probe."
-      #elif FRONT_PROBE_BED_POSITION < MIN_PROBE_Y
-        #error CONFLICT ERROR: "The given FRONT_PROBE_BED_POSITION can't be reached by the probe."
-      #elif BACK_PROBE_BED_POSITION > MAX_PROBE_Y
-        #error CONFLICT ERROR: "The given BACK_PROBE_BED_POSITION can't be reached by the probe."
-      #endif
-
     #else // !AUTO_BED_LEVELING_GRID
 
       // Check the triangulation points

MK/module/sd/SdBaseFile.cpp

@@ -350,7 +350,7 @@ int8_t SdBaseFile::lsPrintNext(uint8_t flags, uint8_t indent) {
       ECHO_C('.');
       w++;
     }
-    ECHO_T(dir.name[i]);
+    ECHO_C(dir.name[i]);
     w++;
   }
   if (DIR_IS_SUBDIR(&dir)) {
@@ -585,7 +585,7 @@ bool SdBaseFile::open(const char* path, uint8_t oflag) {
  * or can't be opened in the access mode specified by oflag.
  */
 bool SdBaseFile::open(SdBaseFile* dirFile, const char* path, uint8_t oflag) {
-  uint8_t dname[LONG_FILENAME_LENGTH+1];
+  uint8_t dname[11];
   SdBaseFile dir1, dir2;
   SdBaseFile* parent = dirFile;
   SdBaseFile* sub = &dir1;
@@ -953,7 +953,7 @@ void SdBaseFile::printDirName(const dir_t& dir,
       ECHO_C('.');
       w++;
     }
-    ECHO_T(dir.name[i]);
+    ECHO_C(dir.name[i]);
     w++;
   }
   if (DIR_IS_SUBDIR(&dir) && printSlash) {
@@ -988,7 +988,7 @@ static void print2u(uint8_t v) {
  * \param[in] fatDate The date field from a directory entry.
  */
 void SdBaseFile::printFatDate(uint16_t fatDate) {
-  ECHO_T(FAT_YEAR(fatDate));
+  ECHO_V(FAT_YEAR(fatDate));
   ECHO_C('-');
   print2u(FAT_MONTH(fatDate));
   ECHO_C('-');

MK/module/sd/SdBaseFile.h

@@ -359,8 +359,8 @@ class SdBaseFile {
   bool open(SdBaseFile* dirFile, const uint8_t dname[11], uint8_t oflag);
   bool openCachedEntry(uint8_t cacheIndex, uint8_t oflags);
   dir_t* readDirCache();
-//------------------------------------------------------------------------------
-// to be deleted
+  //------------------------------------------------------------------------------
+  // to be deleted
   static void printDirName(const dir_t& dir,
                            uint8_t width, bool printSlash);
   //------------------------------------------------------------------------------

MK/module/sd/cardreader.cpp

@@ -85,9 +85,8 @@ void CardReader::lsDive(const char* prepend, SdFile parent, const char* const ma
     else {
       char pn0 = p.name[0];
       if (pn0 == DIR_NAME_FREE) break;
-      if (pn0 == DIR_NAME_DELETED || pn0 == '.' || pn0 == '_') continue;
-      char lf0 = longFilename[0];
-      if (lf0 == '.' || lf0 == '_') continue;
+      if (pn0 == DIR_NAME_DELETED || pn0 == '.') continue;
+      if (longFilename[0] == '.') continue;
 
       if (!DIR_IS_FILE_OR_SUBDIR(&p)) continue;
 
@@ -158,7 +157,7 @@ void CardReader::ls()  {
 
       // Print /LongNamePart to serial output
       ECHO_C('/');
-      ECHO_M(longFilename[0] ? longFilename : "???");
+      ECHO_T(longFilename[0] ? longFilename : "???");
       // If the filename was printed then that's it
       if (!filenameIsDir) break;
       // ECHO_M("Opening dir: "); ECHO_EV(segment);
@@ -326,9 +325,8 @@ void CardReader::openFile(char* name, bool read, bool replace_current/*=true*/,
       }
     }
   }
-  else { //relative path
+  else // relative path
     curDir = &workDir;
-  }
 
   char newName[FILENAME_LENGTH + 2];
   if (strlen((char *)fname) >= 9) {
@@ -375,7 +373,7 @@ void CardReader::openFile(char* name, bool read, bool replace_current/*=true*/,
     }
     else {
       saving = true;
-      ECHO_LMT(DB, SERIAL_SD_WRITE_TO_FILE, name);
+      ECHO_LMT(INFO, SERIAL_SD_WRITE_TO_FILE, name);
       if (lcd_status) lcd_setstatus(fname);
     }
   }
@@ -457,7 +455,7 @@ void CardReader::write_command(char* buf) {
 }
 
 void CardReader::checkautostart(bool force) {
-  if (!force && (!autostart_stilltocheck || next_autostart_ms < millis()))
+  if (!force && (!autostart_stilltocheck || next_autostart_ms >= millis()))
     return;
 
   autostart_stilltocheck = false;

MK/module/sd/cardreader.h

@@ -65,7 +65,7 @@ private:
   SdVolume volume;
   SdFile file;
   #define SD_PROCEDURE_DEPTH 1
-  #define MAXPATHNAMELENGTH (FILENAME_LENGTH * MAX_DIR_DEPTH + MAX_DIR_DEPTH + 1)
+  #define MAXPATHNAMELENGTH (FILENAME_LENGTH*MAX_DIR_DEPTH + MAX_DIR_DEPTH + 1)
   uint8_t file_subcall_ctr;
   uint32_t filespos[SD_PROCEDURE_DEPTH];
   char filenames[SD_PROCEDURE_DEPTH][MAXPATHNAMELENGTH];