Update 4.1.5 RC

See changelog.md for more info

Documentation/changelog.md

+### Version 4.1.5 RC
+* Critical stepper motor frequency bugfix
+* Introduced more intuitive menu tree.
+* Added a menu option to fix loose steps from LCD
+* Improved italian translation
+* G28 gcode now support the "B" flag that enable you to come back to the last position of the axis before the homing command. (Used for fix loose steps)
+
 ### Version 4.1.5
 * Implemented FAST_PWM_FAN and FAN_SOFT_PWM also for other fan that can be added in configuration_adv file.
 * Added the ability to set a min speed to the fan that can be added in configuration_adv file.

MarlinKimbra/Configuration_adv.h

@@ -419,7 +419,11 @@ const unsigned int dropsegments = 5; // everything with less than this number of
 
 // Add support for filament exchange support M600; requires display
 #if ENABLED(ULTIPANEL)
+  #ifdef CARTESIAN
+    #define FILAMENTCHANGEENABLE
+  #else
     //#define FILAMENTCHANGEENABLE
+  #endif
   #if ENABLED(FILAMENTCHANGEENABLE)
     #define FILAMENTCHANGE_XPOS 3
     #define FILAMENTCHANGE_YPOS 3

MarlinKimbra/Default_Version.h

@@ -6,7 +6,7 @@
 // #error "You must specify the following parameters related to your distribution"
 
 #if true
-  #define SHORT_BUILD_VERSION "4.1.5 dev"
+  #define SHORT_BUILD_VERSION "4.1.5 RC"
   #define STRING_DISTRIBUTION_DATE __DATE__ " " __TIME__    // build date and time
   // It might also be appropriate to define a location where additional information can be found
   #define SOURCE_CODE_URL  "https://github.com/MagoKimbra/MarlinKimbra"

MarlinKimbra/Marlin_main.cpp

@@ -3001,6 +3001,16 @@ inline void gcode_G28() {
 
   set_destination_to_current();
 
+  bool come_back = code_seen('B');
+  float lastpos[NUM_AXIS-1];
+  float oldfeedrate;
+  if(come_back) {
+    oldfeedrate = feedrate;
+    for (int i = 0; i <= NUM_AXIS-1; i++) {
+      lastpos[i] = current_position[i];
+    }
+  }
+  
   feedrate = 0.0;
 
   bool  homeX = code_seen(axis_codes[X_AXIS]),
@@ -3394,6 +3404,34 @@ inline void gcode_G28() {
   #endif
 
   clean_up_after_endstop_move();
+  
+  if(come_back) {
+    #if ENABLED(DELTA)
+      feedrate = 1.732 * homing_feedrate[X_AXIS];
+      if(homeX) destination[X_AXIS] = lastpos[X_AXIS];
+      if(homeY) destination[X_AXIS] = lastpos[X_AXIS];
+      if(homeZ) destination[X_AXIS] = lastpos[X_AXIS];
+      prepare_move();
+      feedrate = oldfeedrate;
+    #else
+      if(homeX) {
+        feedrate = homing_feedrate[X_AXIS];
+        destination[X_AXIS] = lastpos[X_AXIS];
+        prepare_move();
+      }
+      if(homeY) {
+        feedrate = homing_feedrate[Y_AXIS];
+        destination[Y_AXIS] = lastpos[Y_AXIS];
+        prepare_move();
+      }
+      if(homeZ) {
+        feedrate = homing_feedrate[Z_AXIS];
+        destination[Z_AXIS] = lastpos[Z_AXIS];
+        prepare_move();
+      }
+      feedrate = oldfeedrate;
+    #endif
+  }
 }
 
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)
@@ -5965,7 +6003,7 @@ inline void gcode_M503() {
   inline void gcode_M600() {
 
     if (degHotend(active_extruder) < extrude_min_temp) {
-      ECHO_LM(ER, MSG_TOO_COLD_FOR_M600);
+      ECHO_LM(ER, MSG_TOO_COLD_FOR_FILAMENTCHANGE);
       return;
     }
 

MarlinKimbra/language_en.h

@@ -47,7 +47,7 @@
 #define MSG_PREHEAT_GUM_ALL                 "Preheat GUM All"
 #define MSG_PREHEAT_GUM_BEDONLY             "Preheat GUM Bed"
 #define MSG_PREHEAT_GUM_SETTINGS            "Preheat GUM conf"
-#define MSG_TOO_COLD_FOR_M600               "M600 Hotend too cold to change filament"
+#define MSG_TOO_COLD_FOR_FILAMENTCHANGE     "Hotend too cold to change filament"
 #define MSG_COOLDOWN                        "Cooldown"
 #define MSG_SWITCH_PS_ON                    "Switch power on"
 #define MSG_SWITCH_PS_OFF                   "Switch power off"
@@ -68,6 +68,7 @@
 #define MSG_FAN_SPEED                       "Fan speed"
 #define MSG_FLOW                            "Flow"
 #define MSG_CONTROL                         "Control"
+#define MSG_FIX_LOSE_STEPS                  "Fix axis steps"
 #define MSG_MIN                             LCD_STR_THERMOMETER " Min"
 #define MSG_MAX                             LCD_STR_THERMOMETER " Max"
 #define MSG_FACTOR                          LCD_STR_THERMOMETER " Fact"
@@ -104,7 +105,7 @@
 #define MSG_E3STEPS                         "E3steps/mm"
 #define MSG_TEMPERATURE                     "Temperature"
 #define MSG_MOTION                          "Motion"
-#define MSG_VOLUMETRIC                      "Filament"
+#define MSG_FILAMENT                      "Filament"
 #define MSG_VOLUMETRIC_ENABLED              "E in mm3"
 #define MSG_FILAMENT_SIZE_EXTRUDER          "Fil. Dia."
 #define MSG_CONTRAST                        "LCD contrast"
@@ -144,6 +145,7 @@
 #define MSG_BABYSTEP_X                      "Babystep X"
 #define MSG_BABYSTEP_Y                      "Babystep Y"
 #define MSG_BABYSTEP_Z                      "Babystep Z"
+#define MSG_BABYSTEP                        "Babystep"
 #define MSG_ENDSTOP_ABORT                   "Endstop abort"
 #define MSG_HEATING_FAILED_LCD              "Heating failed"
 #define MSG_ERR_REDUNDANT_TEMP              "Err: REDUNDANT TEMP ERROR"

MarlinKimbra/language_it.h

@@ -20,15 +20,15 @@
 #define MSG_AUTOSTART                       "Autostart"
 #define MSG_DISABLE_STEPPERS                "Disabilita Motori"
 #define MSG_AUTO_HOME                       "Auto Home"
-#define MSG_MBL_SETTING                     "Manual Bed Leveling "
-#define MSG_MBL_BUTTON                      " Press the button   "
-#define MSG_MBL_INTRO                       " Leveling bed...    "
-#define MSG_MBL_1                           " Adjust first point "
-#define MSG_MBL_2                           " Adjust second point"
-#define MSG_MBL_3                           " Adjust third point "
-#define MSG_MBL_4                           " Adjust fourth point"
-#define MSG_MBL_5                           "    Is it ok?       "
-#define MSG_MBL_6                           " BED leveled!       "
+#define MSG_MBL_SETTING                     "Liv. piatto manuale "
+#define MSG_MBL_BUTTON                      " Premi il tasto   "
+#define MSG_MBL_INTRO                       " Liv. piatto...    "
+#define MSG_MBL_1                           " Calibra il primo punto"
+#define MSG_MBL_2                           " Calibra il secondo punto"
+#define MSG_MBL_3                           " Calibra il terzo punto"
+#define MSG_MBL_4                           " Calibra il quarto punto"
+#define MSG_MBL_5                           "    Va bene?       "
+#define MSG_MBL_6                           " Piatto livellato!       "
 #define MSG_SET_HOME_OFFSETS                "Setta offset home"
 #define MSG_SET_ORIGIN                      "Imposta Origine"
 #define MSG_PREHEAT_PLA                     "Preriscalda PLA"
@@ -43,14 +43,14 @@
 #define MSG_PREHEAT_GUM_ALL                 "Preri. GOMMA Tutto"
 #define MSG_PREHEAT_GUM_BEDONLY             "Preri. GOMMA Piatto"
 #define MSG_PREHEAT_GUM_SETTINGS            "Config. prer. GOMMA"
-#define MSG_TOO_COLD_FOR_M600               "M600 Hotend troppo freddo per il cambio filo"
+#define MSG_TOO_COLD_FOR_FILAMENTCHANGE     "Hotend troppo freddo per il cambio filo"
 #define MSG_COOLDOWN                        "Raffredda"
 #define MSG_SWITCH_PS_ON                    "Accendi aliment."
 #define MSG_SWITCH_PS_OFF                   "Spegni aliment."
 #define MSG_EXTRUDE                         "Estrudi"
 #define MSG_RETRACT                         "Ritrai"
 #define MSG_MOVE_AXIS                       "Muovi Asse"
-#define MSG_LEVEL_BED                       "Level bed"
+#define MSG_LEVEL_BED                       "Liv. piatto"
 #define MSG_MOVE_X                          "Muovi X"
 #define MSG_MOVE_Y                          "Muovi Y"
 #define MSG_MOVE_Z                          "Muovi Z"
@@ -100,7 +100,7 @@
 #define MSG_E3STEPS                         "E3steps/mm"
 #define MSG_TEMPERATURE                     "Temperatura"
 #define MSG_MOTION                          "Movimento"
-#define MSG_VOLUMETRIC                      "Filamento"
+#define MSG_FILAMENT                        "Filamento"
 #define MSG_VOLUMETRIC_ENABLED              "E in mm3"
 #define MSG_FILAMENT_SIZE_EXTRUDER          "Diam. filo"
 #define MSG_CONTRAST                        "Contrasto LCD"
@@ -140,8 +140,9 @@
 #define MSG_BABYSTEP_X                      "Babystep X"
 #define MSG_BABYSTEP_Y                      "Babystep Y"
 #define MSG_BABYSTEP_Z                      "Babystep Z"
-#define MSG_ENDSTOP_ABORT                   "Finecorsa abort"
-#define MSG_HEATING_FAILED_LCD              "Heating failed"
+#define MSG_BABYSTEP                        "Babystep"
+#define MSG_ENDSTOP_ABORT                   "Finecorsa abort."
+#define MSG_HEATING_FAILED_LCD              "Riscaldamento fallito"
 #define MSG_ERR_REDUNDANT_TEMP              "Err: REDUNDANT TEMP ERROR"
 #define MSG_THERMAL_RUNAWAY                 "THERMAL RUNAWAY"
 #define MSG_ERR_MAXTEMP                     "Err: MAXTEMP"
@@ -175,19 +176,19 @@
 
 #define MSG_HEATING                         "Riscaldamento..."
 #define MSG_HEATING_COMPLETE                "Riscaldamento finito."
-#define MSG_BED_HEATING                     "Bed Riscaldamento."
-#define MSG_BED_DONE                        "Bed done."
+#define MSG_BED_HEATING                     "Riscaldamento piatto."
+#define MSG_BED_DONE                        "Piatto riscaldato."
 
 // Extra
 #define MSG_LASER                           "Laser Preset"
 #define MSG_CONFIG                          "Configurazione"
-#define MSG_E_BOWDEN_LENGTH                 "Extrude " STRINGIFY(BOWDEN_LENGTH) "mm"
-#define MSG_R_BOWDEN_LENGTH                 "Retract " STRINGIFY(BOWDEN_LENGTH) "mm"
-#define MSG_PURGE_XMM                       "Purge " STRINGIFY(LCD_PURGE_LENGTH) "mm"
-#define MSG_RETRACT_XMM                     "Retract " STRINGIFY(LCD_RETRACT_LENGTH) "mm"
+#define MSG_E_BOWDEN_LENGTH                 "Estrudi " STRINGIFY(BOWDEN_LENGTH) "mm"
+#define MSG_R_BOWDEN_LENGTH                 "Retrai " STRINGIFY(BOWDEN_LENGTH) "mm"
+#define MSG_PURGE_XMM                       "Purga " STRINGIFY(LCD_PURGE_LENGTH) "mm"
+#define MSG_RETRACT_XMM                     "Retrai " STRINGIFY(LCD_RETRACT_LENGTH) "mm"
 #define MSG_SAVED_POS                       "Posizione Salvata"
-#define MSG_RESTORING_POS                   "Restoring position"
-#define MSG_INVALID_POS_SLOT                "Invalid slot, total slots: "
+#define MSG_RESTORING_POS                   "Ripristino posizione"
+#define MSG_INVALID_POS_SLOT                "Slot invalido, slot totali: "
 
 // Firmware Test
 #ifdef FIRMWARE_TEST

MarlinKimbra/ultralcd.cpp

@@ -63,6 +63,8 @@ static void lcd_status_screen();
   static void lcd_main_menu();
   static void lcd_tune_menu();
   static void lcd_prepare_menu();
+  static void lcd_prepare_motion_menu();
+  static void lcd_prepare_temperature_menu();
   static void lcd_move_menu();
   static void lcd_control_menu();
   static void lcd_control_temperature_menu();
@@ -419,6 +421,8 @@ static void lcd_return_to_status() { lcd_goto_menu(lcd_status_screen); }
 
   static void lcd_sdcard_stop() {
     quickStop();
+    disable_all_heaters();
+    fanSpeed = 0;
     card.sdprinting = false;
     card.closeFile();
     autotempShutdown();
@@ -494,21 +498,43 @@ void lcd_set_home_offsets() {
 
 #if ENABLED(BABYSTEPPING)
 
-  static void _lcd_babystep(int axis, const char *msg) {
+  static void _lcd_babystep(menuFunc_t menu, int axis, const char *msg) {
     if (encoderPosition != 0) {
       babystepsTodo[axis] += (int)encoderPosition;
       encoderPosition = 0;
       lcdDrawUpdate = 1;
     }
     if (lcdDrawUpdate) lcd_implementation_drawedit(msg, "");
-    if (LCD_CLICKED) lcd_goto_menu(lcd_tune_menu);
+    if (LCD_CLICKED) lcd_goto_menu(menu);
   }
-  static void lcd_babystep_x() { _lcd_babystep(X_AXIS, PSTR(MSG_BABYSTEPPING_X)); }
-  static void lcd_babystep_y() { _lcd_babystep(Y_AXIS, PSTR(MSG_BABYSTEPPING_Y)); }
-  static void lcd_babystep_z() { _lcd_babystep(Z_AXIS, PSTR(MSG_BABYSTEPPING_Z)); }
+  static void lcd_prepare_motion_babystep();
+  static void lcd_tune_babystep_x() { _lcd_babystep(lcd_tune_menu, X_AXIS, PSTR(MSG_BABYSTEPPING_X)); }
+  static void lcd_tune_babystep_y() { _lcd_babystep(lcd_tune_menu, Y_AXIS, PSTR(MSG_BABYSTEPPING_Y)); }
+  static void lcd_tune_babystep_z() { _lcd_babystep(lcd_tune_menu, Z_AXIS, PSTR(MSG_BABYSTEPPING_Z)); }
+  static void lcd_prepare_babystep_x() { _lcd_babystep(lcd_prepare_motion_babystep, X_AXIS, PSTR(MSG_BABYSTEPPING_X)); }
+  static void lcd_prepare_babystep_y() { _lcd_babystep(lcd_prepare_motion_babystep, Y_AXIS, PSTR(MSG_BABYSTEPPING_Y)); }
+  static void lcd_prepare_babystep_z() { _lcd_babystep(lcd_prepare_motion_babystep, Z_AXIS, PSTR(MSG_BABYSTEPPING_Z)); }
   
+  static void lcd_prepare_motion_babystep() {
+    START_MENU(lcd_main_menu);
+    MENU_ITEM(back, MSG_MOTION, lcd_prepare_motion_menu);
+    #if ENABLED(BABYSTEP_XY)
+      MENU_ITEM(submenu, MSG_BABYSTEP_X, lcd_prepare_babystep_x);
+      MENU_ITEM(submenu, MSG_BABYSTEP_Y, lcd_prepare_babystep_y);
+    #endif //BABYSTEP_XY
+    MENU_ITEM(submenu, MSG_BABYSTEP_Z, lcd_prepare_babystep_z);
+    END_MENU();
+  }
 #endif //BABYSTEPPING
 
+static void lcd_tune_fixstep() {
+  #if ENABLED(DELTA)
+    enqueuecommands_P(PSTR("G28 X Y Z B"));
+  #else
+    enqueuecommands_P(PSTR("G28 X Y B"));
+  #endif
+}
+
 /**
  *
  * "Tune" submenu
@@ -548,11 +574,14 @@ static void lcd_tune_menu() {
 
   #if ENABLED(BABYSTEPPING)
     #if ENABLED(BABYSTEP_XY)
-      MENU_ITEM(submenu, MSG_BABYSTEP_X, lcd_babystep_x);
-      MENU_ITEM(submenu, MSG_BABYSTEP_Y, lcd_babystep_y);
+      MENU_ITEM(submenu, MSG_BABYSTEP_X, lcd_tune_babystep_x);
+      MENU_ITEM(submenu, MSG_BABYSTEP_Y, lcd_tune_babystep_y);
     #endif //BABYSTEP_XY
-    MENU_ITEM(submenu, MSG_BABYSTEP_Z, lcd_babystep_z);
+    MENU_ITEM(submenu, MSG_BABYSTEP_Z, lcd_tune_babystep_z);
   #endif
+  
+  MENU_ITEM(function, MSG_FIX_LOSE_STEPS, lcd_tune_fixstep);
+  
   #if ENABLED(FILAMENTCHANGEENABLE)
      MENU_ITEM(gcode, MSG_FILAMENTCHANGE, PSTR("M600"));
   #endif
@@ -637,8 +666,8 @@ void lcd_preheat_gum0() { _lcd_preheat(0, gumPreheatHotendTemp, gumPreheatHPBTem
   void lcd_preheat_gum_bedonly() { _lcd_preheat(0, 0, gumPreheatHPBTemp, gumPreheatFanSpeed); }
 #endif
 static void lcd_preheat_pla_menu() {
-  START_MENU(lcd_prepare_menu);
-  MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu);
+  START_MENU(lcd_prepare_temperature_menu);
+  MENU_ITEM(back, MSG_TEMPERATURE, lcd_prepare_temperature_menu);
   MENU_ITEM(function, MSG_PREHEAT_PLA " 0", lcd_preheat_pla0);
   #if HOTENDS > 1
     MENU_ITEM(function, MSG_PREHEAT_PLA " 1", lcd_preheat_pla1);
@@ -657,8 +686,8 @@ static void lcd_preheat_pla_menu() {
 }
 
 static void lcd_preheat_abs_menu() {
-  START_MENU(lcd_prepare_menu);
-  MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu);
+  START_MENU(lcd_prepare_temperature_menu);
+  MENU_ITEM(back, MSG_TEMPERATURE, lcd_prepare_temperature_menu);
   MENU_ITEM(function, MSG_PREHEAT_ABS " 0", lcd_preheat_abs0);
   #if HOTENDS > 1
     MENU_ITEM(function, MSG_PREHEAT_ABS " 1", lcd_preheat_abs1);
@@ -677,8 +706,8 @@ static void lcd_preheat_abs_menu() {
 }
 
 static void lcd_preheat_gum_menu() {
-  START_MENU(lcd_prepare_menu);
-  MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu);
+  START_MENU(lcd_prepare_temperature_menu);
+  MENU_ITEM(back, MSG_TEMPERATURE, lcd_prepare_temperature_menu);
   MENU_ITEM(function, MSG_PREHEAT_GUM " 0", lcd_preheat_gum0);
   #if HOTENDS > 1
     MENU_ITEM(function, MSG_PREHEAT_GUM " 1", lcd_preheat_gum1);
@@ -716,6 +745,24 @@ static void lcd_prepare_menu() {
   //
   MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
 
+  MENU_ITEM(submenu, MSG_MOTION, lcd_prepare_motion_menu);
+  MENU_ITEM(submenu, MSG_TEMPERATURE, lcd_prepare_temperature_menu);
+  END_MENU();
+}
+
+/**
+ *
+ * "Prepare > Motion" submenu
+ *
+ */
+
+static void lcd_prepare_motion_menu() {
+  START_MENU(lcd_prepare_menu);
+  //
+  // ^ Prepare
+  //
+  MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu);
+
   //
   // Auto Home
   //
@@ -735,7 +782,6 @@ static void lcd_prepare_menu() {
   // Set Home Offsets
   //
   MENU_ITEM(function, MSG_SET_HOME_OFFSETS, lcd_set_home_offsets);
-  //MENU_ITEM(gcode, MSG_SET_ORIGIN, PSTR("G92 X0 Y0 Z0"));
   
   //Add Preset menu for LASER setting '14. 7. 22
   #if ENABLED(LASERBEAM)
@@ -753,11 +799,73 @@ static void lcd_prepare_menu() {
   //
   MENU_ITEM(submenu, MSG_MOVE_AXIS, lcd_move_menu);
   
+  //
+  // Easy Load
+  //
+  #if ENABLED(EASY_LOAD)
+    MENU_ITEM(function, MSG_E_BOWDEN_LENGTH, lcd_easy_load);
+    MENU_ITEM(function, MSG_R_BOWDEN_LENGTH, lcd_easy_unload);
+    MENU_ITEM(function, MSG_PURGE_XMM, lcd_purge);
+    MENU_ITEM(function, MSG_RETRACT_XMM, lcd_retract);
+  #endif // EASY_LOAD
+  
+  //
+  // Babystepping
+  //
+  #if ENABLED(BABYSTEPPING)
+    MENU_ITEM(submenu, MSG_BABYSTEP, lcd_prepare_motion_babystep);
+  #endif
+  
+  MENU_ITEM(function, MSG_FIX_LOSE_STEPS, lcd_tune_fixstep);
+  
   //
   // Disable Steppers
   //
   MENU_ITEM(gcode, MSG_DISABLE_STEPPERS, PSTR("M84"));
   
+  END_MENU();
+}
+
+/**
+ *
+ * "Prepare > Temperature" submenu
+ *
+ */
+
+static void lcd_prepare_temperature_menu() {
+  START_MENU(lcd_prepare_menu);
+  //
+  // ^ Prepare
+  //
+  MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu);
+  //
+  // Nozzle, Nozzle 2, Nozzle 3, Nozzle 4
+  //
+  #if TEMP_SENSOR_0 != 0
+    MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 0", &target_temperature[0], 0, HEATER_0_MAXTEMP + LCD_MAX_TEMP_OFFSET);
+  #endif
+  #if HOTENDS > 1 && TEMP_SENSOR_1 != 0
+    MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 1", &target_temperature[1], 0, HEATER_1_MAXTEMP + LCD_MAX_TEMP_OFFSET);
+    #if HOTENDS > 2 && TEMP_SENSOR_2 != 0
+      MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 2", &target_temperature[2], 0, HEATER_2_MAXTEMP + LCD_MAX_TEMP_OFFSET);
+      #if HOTENDS > 3 && TEMP_SENSOR_3 != 0
+        MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 3", &target_temperature[3], 0, HEATER_3_MAXTEMP + LCD_MAX_TEMP_OFFSET);
+      #endif // HOTENDS > 3
+    #endif // HOTENDS > 2
+  #endif // HOTENDS > 1
+
+  //
+  // Bed
+  //
+  #if TEMP_SENSOR_BED != 0
+    MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP + LCD_MAX_TEMP_OFFSET);
+  #endif
+
+  //
+  // Fan Speed
+  //
+  MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255);
+  
   //
   // Preheat PLA
   // Preheat ABS
@@ -780,33 +888,6 @@ static void lcd_prepare_menu() {
   //
   MENU_ITEM(function, MSG_COOLDOWN, lcd_cooldown);
   
-  //
-  // Easy Load
-  //
-  #if ENABLED(EASY_LOAD)
-    MENU_ITEM(function, MSG_E_BOWDEN_LENGTH, lcd_easy_load);
-    MENU_ITEM(function, MSG_R_BOWDEN_LENGTH, lcd_easy_unload);
-    MENU_ITEM(function, MSG_PURGE_XMM, lcd_purge);
-    MENU_ITEM(function, MSG_RETRACT_XMM, lcd_retract);
-  #endif // EASY_LOAD 
-
-  //
-  // Switch power on/off
-  //
-  #if HAS_POWER_SWITCH
-    if (powersupply)
-      MENU_ITEM(gcode, MSG_SWITCH_PS_OFF, PSTR("M81"));
-    else
-      MENU_ITEM(gcode, MSG_SWITCH_PS_ON, PSTR("M80"));
-  #endif
-
-  //
-  // Autostart
-  //
-  #if ENABLED(SDSUPPORT) && ENABLED(MENU_ADDAUTOSTART)
-    MENU_ITEM(function, MSG_AUTOSTART, lcd_autostart_sd);
-  #endif
-
   END_MENU();
 }
 
@@ -825,12 +906,12 @@ static void lcd_prepare_menu() {
 
 #endif // DELTA
 
-inline void line_to_current(AxisEnum axis) {
+inline void line_to_current(float feedrate) {
   #if ENABLED(DELTA)
     calculate_delta(current_position);
-    plan_buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], current_position[E_AXIS], manual_feedrate[axis]/60, active_extruder, active_driver);
+    plan_buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], current_position[E_AXIS], feedrate/60, active_extruder, active_driver);
   #else
-    plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], manual_feedrate[axis]/60, active_extruder, active_driver);
+    plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], feedrate/60, active_extruder, active_driver);
   #endif
 }
 
@@ -850,7 +931,7 @@ static void _lcd_move(const char *name, AxisEnum axis, int min, int max) {
     if (min_software_endstops && current_position[axis] < min) current_position[axis] = min;
     if (max_software_endstops && current_position[axis] > max) current_position[axis] = max;
     encoderPosition = 0;
-    line_to_current(axis);
+    line_to_current(manual_feedrate[axis]);
     lcdDrawUpdate = 1;
   }
   if (lcdDrawUpdate) lcd_implementation_drawedit(name, ftostr31(current_position[axis]));
@@ -866,7 +947,7 @@ static void lcd_move_e() {
     #endif
     current_position[E_AXIS] += float((int)encoderPosition) * move_menu_scale;
     encoderPosition = 0;
-    line_to_current(E_AXIS);
+    line_to_current(manual_feedrate[E_AXIS]);
     lcdDrawUpdate = 1;
   }
   if (lcdDrawUpdate) lcd_implementation_drawedit(PSTR(MSG_MOVE_E), ftostr31(current_position[E_AXIS]));
@@ -884,8 +965,8 @@ static void lcd_move_menu_axis() {
   MENU_ITEM(back, MSG_MOVE_AXIS, lcd_move_menu);
   MENU_ITEM(submenu, MSG_MOVE_X, lcd_move_x);
   MENU_ITEM(submenu, MSG_MOVE_Y, lcd_move_y);
-  if (move_menu_scale < 10.0) {
   MENU_ITEM(submenu, MSG_MOVE_Z, lcd_move_z);
+  if (move_menu_scale < 10.0) {
     MENU_ITEM(submenu, MSG_MOVE_E, lcd_move_e);
   }
   END_MENU();
@@ -911,8 +992,8 @@ static void lcd_move_menu_01mm() {
  */
 
 static void lcd_move_menu() {
-  START_MENU(lcd_prepare_menu);
-  MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu);
+  START_MENU(lcd_prepare_motion_menu);
+  MENU_ITEM(back, MSG_MOTION, lcd_prepare_motion_menu);
   MENU_ITEM(submenu, MSG_MOVE_10MM, lcd_move_menu_10mm);
   MENU_ITEM(submenu, MSG_MOVE_1MM, lcd_move_menu_1mm);
   MENU_ITEM(submenu, MSG_MOVE_01MM, lcd_move_menu_01mm);
@@ -931,7 +1012,7 @@ static void lcd_control_menu() {
   MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
   MENU_ITEM(submenu, MSG_TEMPERATURE, lcd_control_temperature_menu);
   MENU_ITEM(submenu, MSG_MOTION, lcd_control_motion_menu);
-  MENU_ITEM(submenu, MSG_VOLUMETRIC, lcd_control_volumetric_menu);
+  MENU_ITEM(submenu, MSG_FILAMENT, lcd_control_volumetric_menu);
 
   #if ENABLED(HAS_LCD_CONTRAST)
     //MENU_ITEM_EDIT(int3, MSG_CONTRAST, &lcd_contrast, 0, 63);
@@ -940,6 +1021,24 @@ static void lcd_control_menu() {
   #if ENABLED(FWRETRACT)
     MENU_ITEM(submenu, MSG_RETRACT, lcd_control_retract_menu);
   #endif
+  
+  //
+  // Switch power on/off
+  //
+  #if HAS_POWER_SWITCH
+    if (powersupply)
+      MENU_ITEM(gcode, MSG_SWITCH_PS_OFF, PSTR("M81"));
+    else
+      MENU_ITEM(gcode, MSG_SWITCH_PS_ON, PSTR("M80"));
+  #endif
+
+  //
+  // Autostart
+  //
+  #if ENABLED(SDSUPPORT) && ENABLED(MENU_ADDAUTOSTART)
+    MENU_ITEM(function, MSG_AUTOSTART, lcd_autostart_sd);
+  #endif
+  
   #if ENABLED(EEPROM_SETTINGS)
     MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings);
     MENU_ITEM(function, MSG_LOAD_EPROM, Config_RetrieveSettings);
@@ -996,37 +1095,6 @@ static void lcd_control_temperature_menu() {
   //
   MENU_ITEM(back, MSG_CONTROL, lcd_control_menu);
 
-  //
-  // Nozzle, Nozzle 2, Nozzle 3, Nozzle 4
-  //
-  #if TEMP_SENSOR_0 != 0
-    MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 0", &target_temperature[0], 0, HEATER_0_MAXTEMP + LCD_MAX_TEMP_OFFSET);
-  #endif
-  #if HOTENDS > 1 && TEMP_SENSOR_1 != 0
-    MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 1", &target_temperature[1], 0, HEATER_1_MAXTEMP + LCD_MAX_TEMP_OFFSET);
-    #if HOTENDS > 2 && TEMP_SENSOR_2 != 0
-      MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 2", &target_temperature[2], 0, HEATER_2_MAXTEMP + LCD_MAX_TEMP_OFFSET);
-      #if HOTENDS > 3 && TEMP_SENSOR_3 != 0
-        MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 3", &target_temperature[3], 0, HEATER_3_MAXTEMP + LCD_MAX_TEMP_OFFSET);
-      #endif // HOTENDS > 3
-    #endif // HOTENDS > 2
-  #endif // HOTENDS > 1
-
-  //
-  // Bed
-  //
-  #if TEMP_SENSOR_BED != 0
-    MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP + LCD_MAX_TEMP_OFFSET);
-  #endif
-
-  //
-  // Fan Speed
-  //
-  MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255);
-  #if ENABLED(IDLE_OOZING_PREVENT)
-    MENU_ITEM_EDIT(bool, MSG_IDLEOOZING, &IDLE_OOZING_enabled);
-  #endif
-
   //
   // Autotemp, Min, Max, Fact
   //
@@ -1077,6 +1145,13 @@ static void lcd_control_temperature_menu() {
     #endif // HOTENDS > 1
   #endif // PIDTEMP
   
+  //
+  // Idle oozing
+  //
+  #if ENABLED(IDLE_OOZING_PREVENT)
+    MENU_ITEM_EDIT(bool, MSG_IDLEOOZING, &IDLE_OOZING_enabled);
+  #endif
+
   //
   // Preheat PLA conf
   //
@@ -2235,7 +2310,7 @@ char *ftostr52(const float &x) {
           LCD_Printpos(0, 1); lcd_printPGM(PSTR("                  "));
           delay(5000);
           enqueuecommands_P(PSTR("G28"));
-          lcd_return_to_status();
+          lcd_goto_menu(lcd_prepare_motion_menu);
         }
       break;
     }

README.md

 <img align="right" src="Documentation/Logo/MarlinKimbra%20Logo%20GitHub.png" />
 # MarlinKimbra 3D Printer Firmware
-## Version 4.1.5 dev
+## Version 4.1.5 RC (Release Candidate)
 
   * [Configuration & Compilation](/Documentation/Compilation.md)
   * Supported
@@ -41,9 +41,10 @@ Added anti extruder idle oozing system.
 
 The current MarlinKimbra dev team consists of:
  - MagoKimbra - Alberto Cotronei (https://github.com/MagoKimbra)
+ - simonepri - Simone Primarosa (https://github.com/simonepri)
 
 More features have been added by:
- - simonepri - Simone Primarosa (https://github.com/simonepri)
+ -
 
 ## License