Fix printcounter

MK/Configuration_Store.cpp

@@ -950,7 +950,6 @@ void ConfigSD_ResetDefault() {
 
     card.closeFile();
     card.setlast();
-    config_last_update = millis();
     unset_sd_dot();
   }
 
@@ -1008,9 +1007,9 @@ void ConfigSD_ResetDefault() {
       }
     }
 
+    print_job_counter.loaded = true;
     card.closeFile();
     card.setlast();
-    config_readed = true;
     unset_sd_dot();
   }
 

MK/module/MK_Main.cpp

@@ -270,10 +270,6 @@ bool software_endstops = true;
 
 #if ENABLED(SDSUPPORT)
   static bool fromsd[BUFSIZE];
-  #if ENABLED(SD_SETTINGS)
-    millis_t config_last_update = 0;
-    bool config_readed = false;
-  #endif
 #endif
 
 #if ENABLED(IDLE_OOZING_PREVENT)
@@ -8997,18 +8993,6 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) {
     }
   #endif
 
-  #if ENABLED(SDSUPPORT) && ENABLED(SD_SETTINGS)
-    if(IS_SD_INSERTED && !IS_SD_PRINTING) {
-      if (!config_readed) {
-        ConfigSD_RetrieveSettings(true);
-        ConfigSD_StoreSettings();
-      }
-      else if((millis() - config_last_update) >  SD_CFG_SECONDS * 1000UL) {
-        ConfigSD_StoreSettings();
-      }
-    }
-  #endif
-
   #if ENABLED(TEMP_STAT_LEDS)
     handle_status_leds();
   #endif

MK/module/MK_Main.h

@@ -240,11 +240,6 @@ extern int fanSpeed;
   extern int laser_ttl_modulation;
 #endif
 
-#if ENABLED(SDSUPPORT) && ENABLED(SD_SETTINGS)
-  extern millis_t config_last_update;
-  extern bool config_readed;
-#endif
-
 // Print job timer
 extern PrintCounter print_job_counter;
 

MK/module/motion/endstops.cpp

@@ -35,9 +35,9 @@ Endstops endstops;
 Endstops::Endstops() {
   enable_globally(
     #if ENABLED(ENDSTOPS_ONLY_FOR_HOMING)
-      true
-    #else
       false
+    #else
+      true
     #endif
   );
   enable(true);
@@ -159,7 +159,7 @@ void Endstops::report_state() {
     #if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) && ENABLED(SDSUPPORT)
       if (abort_on_endstop_hit) {
         card.sdprinting = false;
-        card.closefile();
+        card.closeFile();
         quickStop();
         disable_all_heaters(); // switch off all heaters.
       }

MK/module/printcounter/printcounter.cpp

@@ -45,6 +45,32 @@ void PrintCounter::initStats() {
   this->data = { 0, 0, 0, 0, 0.0 };
 }
 
+void PrintCounter::loadStats() {
+  #if ENABLED(DEBUG_PRINTCOUNTER)
+    PrintCounter::debug(PSTR("loadStats"));
+  #endif
+
+  #if ENABLED(SDSUPPORT) && ENABLED(SD_SETTINGS)
+    // Checks if the SDCARD is inserted
+    if(IS_SD_INSERTED && !IS_SD_PRINTING) {
+      ConfigSD_RetrieveSettings(true);
+    }
+  #endif
+}
+
+void PrintCounter::saveStats() {
+  #if ENABLED(DEBUG_PRINTCOUNTER)
+    PrintCounter::debug(PSTR("saveStats"));
+  #endif
+
+  // Refuses to save data is object is not loaded
+  if (!this->loaded) return;
+
+  #if ENABLED(SDSUPPORT) && ENABLED(SD_SETTINGS)
+    ConfigSD_StoreSettings();
+  #endif
+}
+
 void PrintCounter::showStats() {
   char temp[30];
   uint32_t day, hours, minutes;
@@ -81,7 +107,7 @@ void PrintCounter::showStats() {
 void PrintCounter::tick() {
 
   static uint32_t update_before = millis(),
-                  eeprom_before = millis();
+                  config_last_update = millis();
 
   uint32_t now = millis();
 
@@ -100,27 +126,47 @@ void PrintCounter::tick() {
       PrintCounter::debug(PSTR("tick"));
     #endif
   }
+
+  #if ENABLED(SDSUPPORT) && ENABLED(SD_SETTINGS)
+    if (!this->loaded) {
+      this->loadStats();
+      this->saveStats();
+    }
+    else if (now - config_last_update >= this->saveInterval) {
+      config_last_update = now;
+      this->saveStats();
+    }
+  #endif
 }
 
-void PrintCounter::start() {
+bool PrintCounter::start() {
   #if ENABLED(DEBUG_PRINTCOUNTER)
     PrintCounter::debug(PSTR("start"));
   #endif
 
-  if (!this->isPaused()) this->data.numberPrints++;
-  super::start();
+  bool paused = this->isPaused();
+
+  if (super::start()) {
+    if (!paused) {
+      this->data.numberPrints++;
+      this->lastDuration = 0;
+    }
+    return true;
+  }
+  else return false;
 }
 
-void PrintCounter::stop() {
+bool PrintCounter::stop() {
   #if ENABLED(DEBUG_PRINTCOUNTER)
     PrintCounter::debug(PSTR("stop"));
   #endif
 
-  if (!this->isRunning()) return;
-  super::stop();
-
+  if (super::stop()) {
     this->data.completePrints++;
     this->data.printTime += this->deltaDuration();
+    this->saveStats();
+  }
+  else return false;
 }
 
 void PrintCounter::reset() {
@@ -128,8 +174,8 @@ void PrintCounter::reset() {
     PrintCounter::debug(PSTR("stop"));
   #endif
 
-  this->lastDuration = 0;
   super::reset();
+  this->lastDuration = 0;
 }
 
 #if ENABLED(DEBUG_PRINTCOUNTER)

MK/module/printcounter/printcounter.h

@@ -47,6 +47,12 @@
        */
       const uint16_t updateInterval = 10;
 
+      /**
+       * @brief Interval in seconds between SDCARD saves
+       * @details This const value defines what will be the time between each
+       */
+      const uint32_t saveInterval = SD_CFG_SECONDS * 1000;
+
       /**
        * @brief Timestamp of the last call to deltaDuration()
        * @details Stores the timestamp of the last deltaDuration(), this is
@@ -73,11 +79,11 @@
       PrintCounter();
 
       /**
-       * @brief Checks if Print Statistics has been loaded
-       * @details Returns true if the statistical data has been loaded.
-       * @return bool
+       * @brief Stats were loaded from SDCARD
+       * @details If set to true it indicates if the statistical data was already
+       * loaded from the SDCARD.
        */
-      bool isLoaded();
+      bool loaded = false;
 
       /**
        * @brief Resets the Print Statistics
@@ -86,6 +92,18 @@
        */
       void initStats();
 
+      /**
+       * @brief Loads the Print Statistics
+       * @details Loads the statistics from SDCARD
+       */
+      void loadStats();
+
+      /**
+       * @brief Saves the Print Statistics
+       * @details Saves the statistics to SDCARD
+       */
+      void saveStats();
+
       /**
        * @brief Serial output the Print Statistics
        * @details This function may change in the future, for now it directly
@@ -96,15 +114,15 @@
       /**
        * @brief Loop function
        * @details This function should be called at loop, it will take care of
-       * periodically save the statistical data to EEPROM and do time keeping.
+       * periodically save the statistical data to SDCARD and do time keeping.
        */
       void tick();
 
       /**
        * The following functions are being overridden
        */
-      void start();
-      void stop();
+      bool start();
+      bool stop();
       void reset();
 
       #if ENABLED(DEBUG_PRINTCOUNTER)

MK/module/printcounter/stopwatch.cpp

@@ -27,40 +27,46 @@ Stopwatch::Stopwatch() {
   this->reset();
 }
 
-void Stopwatch::stop() {
+bool Stopwatch::stop() {
   #if ENABLED(DEBUG_STOPWATCH)
     Stopwatch::debug(PSTR("stop"));
   #endif
 
-  if (!this->isRunning()) return;
-
-  this->state = STPWTCH_STOPPED;
+  if (this->isRunning() || this->isPaused()) {
+    this->state = STOPWATCH_STOPPED;
     this->stopTimestamp = millis();
+    return true;
+  }
+  else return false;
 }
 
-void Stopwatch::pause() {
+bool Stopwatch::pause() {
   #if ENABLED(DEBUG_STOPWATCH)
     Stopwatch::debug(PSTR("pause"));
   #endif
 
-  if (!this->isRunning()) return;
-
-  this->state = STPWTCH_PAUSED;
+  if (this->isRunning()) {
+    this->state = STOPWATCH_PAUSED;
     this->stopTimestamp = millis();
+    return true;
+  }
+  else return false;
 }
 
-void Stopwatch::start() {
+bool Stopwatch::start() {
   #if ENABLED(DEBUG_STOPWATCH)
     Stopwatch::debug(PSTR("start"));
   #endif
 
-  if (this->isRunning()) return;
-
+  if (!this->isRunning()) {
     if (this->isPaused()) this->accumulator = this->duration();
     else this->reset();
 
-  this->state = STPWTCH_RUNNING;
+    this->state = STOPWATCH_RUNNING;
     this->startTimestamp = millis();
+    return true;
+  }
+  else return false;
 }
 
 void Stopwatch::reset() {
@@ -68,18 +74,18 @@ void Stopwatch::reset() {
     Stopwatch::debug(PSTR("reset"));
   #endif
 
-  this->state = STPWTCH_STOPPED;
+  this->state = STOPWATCH_STOPPED;
   this->startTimestamp = 0;
   this->stopTimestamp = 0;
   this->accumulator = 0;
 }
 
 bool Stopwatch::isRunning() {
-  return (this->state == STPWTCH_RUNNING) ? true : false;
+  return (this->state == STOPWATCH_RUNNING) ? true : false;
 }
 
 bool Stopwatch::isPaused() {
-  return (this->state == STPWTCH_PAUSED) ? true : false;
+  return (this->state == STOPWATCH_PAUSED) ? true : false;
 }
 
 uint16_t Stopwatch::duration() {

MK/module/printcounter/stopwatch.h

@@ -27,9 +27,9 @@
   //#define DEBUG_STOPWATCH
 
   enum StopwatchState {
-    STPWTCH_STOPPED,
-    STPWTCH_RUNNING,
-    STPWTCH_PAUSED
+    STOPWATCH_STOPPED,
+    STOPWATCH_RUNNING,
+    STOPWATCH_PAUSED
   };
 
   /**
@@ -54,22 +54,25 @@
        * @brief Stops the stopwatch
        * @details Stops the running timer, it will silently ignore the request if
        * no timer is currently running.
+       * @return true is method was successful
        */
-      void stop();
+      bool stop();
 
       /**
        * @brief Pauses the stopwatch
        * @details Pauses the running timer, it will silently ignore the request if
        * no timer is currently running.
+       * @return true is method was successful
        */
-      void pause();
+      bool pause();
 
       /**
        * @brief Starts the stopwatch
        * @details Starts the timer, it will silently ignore the request if the
        * timer is already running.
+       * @return true is method was successful
        */
-      void start();
+      bool start();
 
       /**
        * @brief Resets the stopwatch
@@ -80,21 +83,21 @@
       /**
        * @brief Checks if the timer is running
        * @details Returns true if the timer is currently running, false otherwise.
-       * @return bool
+       * @return true if stopwatch is running
        */
       bool isRunning();
 
       /**
        * @brief Checks if the timer is paused
        * @details Returns true if the timer is currently paused, false otherwise.
-       * @return bool
+       * @return true if stopwatch is paused
        */
       bool isPaused();
 
       /**
        * @brief Gets the running time
        * @details Returns the total number of seconds the timer has been running.
-       * @return uint16_t
+       * @return the delta since starting the stopwatch
        */
       uint16_t duration();
 
@@ -108,4 +111,4 @@
 
       #endif
   };
-#endif //STOPWATCH_H
+#endif // STOPWATCH_H

MK/module/temperature/temperature.cpp

@@ -1402,7 +1402,6 @@ void disable_all_heaters() {
 
     return (int)max6675_temp;
   }
-
 #endif // HEATER_0_USES_MAX6675
 
 /**