Skip to content

M
MarlinKimbra
Commit 89caa423 authored by MagoKimbra's avatar MagoKimbra
Browse files
Options

Same fix

parent 29907c62
Show whitespace changes
Inline Side-by-side
Showing with 184 additions and 137 deletions
MarlinKimbra/Marlin.h
View file @ 89caa423
......@@ -139,7 +139,7 @@ void manage_inactivity(bool ignore_stepper_queue=false);
*/
enum AxisEnum {X_AXIS=0, Y_AXIS=1, A_AXIS=0, B_AXIS=1, Z_AXIS=2, E_AXIS=3, X_HEAD=4, Y_HEAD=5};
enum EndstopEnum {X_MIN=0, Y_MIN=1, Z_MIN=2, Z_PROBE=3, X_MAX=4, Y_MAX=5, Z_MAX=6};
enum EndstopEnum {X_MIN=0, Y_MIN=1, Z_MIN=2, Z_PROBE=3, X_MAX=4, Y_MAX=5, Z_MAX=6, Z2_MIN=7, Z2_MAX=8};
void enable_all_steppers();
void disable_all_steppers();
......
MarlinKimbra/Marlin_main.cpp
View file @ 89caa423
......@@ -240,6 +240,7 @@ bool axis_known_position[3] = { false };
static long gcode_N, gcode_LastN, Stopped_gcode_LastN = 0;
static char *current_command, *current_command_args;
static int cmd_queue_index_r = 0;
static int cmd_queue_index_w = 0;
static int commands_in_queue = 0;
......@@ -269,8 +270,8 @@ static bool relative_mode = false; //Determines Absolute or Relative Coordinate
static char serial_char;
static int serial_count = 0;
static boolean comment_mode = false;
static char *strchr_pointer; ///< A pointer to find chars in the command string (X, Y, Z, E, etc.)
const char* queued_commands_P= NULL; /* pointer to the current line in the active sequence of commands, or NULL when none */
static char *seen_pointer; // < A pointer to find chars in the command string (X, Y, Z, E, etc.)
const char* queued_commands_P = NULL; /* pointer to the current line in the active sequence of commands, or NULL when none */
const int sensitive_pins[] = SENSITIVE_PINS; ///< Sensitive pin list for M42
// Inactivity shutdown
millis_t previous_cmd_ms = 0;
......@@ -872,8 +873,8 @@ void get_command() {
#endif
if (strchr(command, 'N') != NULL) {
strchr_pointer = strchr(command, 'N');
gcode_N = (strtol(strchr_pointer + 1, NULL, 10));
seen_pointer = strchr(command, 'N');
gcode_N = (strtol(seen_pointer + 1, NULL, 10));
if (gcode_N != gcode_LastN + 1 && strstr_P(command, PSTR("M110")) == NULL) {
gcode_line_error(PSTR(MSG_ERR_LINE_NO));
return;
......@@ -883,9 +884,9 @@ void get_command() {
byte checksum = 0;
byte count = 0;
while (command[count] != '*') checksum ^= command[count++];
strchr_pointer = strchr(command, '*');
seen_pointer = strchr(command, '*');
if (strtol(strchr_pointer + 1, NULL, 10) != checksum) {
if (strtol(seen_pointer + 1, NULL, 10) != checksum) {
gcode_line_error(PSTR(MSG_ERR_CHECKSUM_MISMATCH));
return;
}
......@@ -907,8 +908,8 @@ void get_command() {
}
if (strchr(command, 'G') != NULL) {
strchr_pointer = strchr(command, 'G');
switch (strtol(strchr_pointer + 1, NULL, 10)) {
seen_pointer = strchr(command, 'G');
switch (strtol(seen_pointer + 1, NULL, 10)) {
case 0:
case 1:
case 2:
......@@ -1001,32 +1002,32 @@ void get_command() {
bool code_has_value() {
int i = 1;
char c = strchr_pointer[i];
if (c == '-' || c == '+') c = strchr_pointer[++i];
if (c == '.') c = strchr_pointer[++i];
char c = seen_pointer[i];
if (c == '-' || c == '+') c = seen_pointer[++i];
if (c == '.') c = seen_pointer[++i];
return (c >= '0' && c <= '9');
}
float code_value() {
float ret;
char *e = strchr(strchr_pointer, 'E');
char *e = strchr(seen_pointer, 'E');
if (e) {
*e = 0;
ret = strtod(strchr_pointer+1, NULL);
ret = strtod(seen_pointer + 1, NULL);
*e = 'E';
}
else
ret = strtod(strchr_pointer+1, NULL);
ret = strtod(seen_pointer + 1, NULL);
return ret;
}
long code_value_long() { return strtol(strchr_pointer + 1, NULL, 10); }
long code_value_long() { return strtol(seen_pointer + 1, NULL, 10); }
int16_t code_value_short() { return (int16_t)strtol(strchr_pointer + 1, NULL, 10); }
int16_t code_value_short() { return (int16_t)strtol(seen_pointer + 1, NULL, 10); }
bool code_seen(char code) {
strchr_pointer = strchr(command_queue[cmd_queue_index_r], code);
return (strchr_pointer != NULL); //Return True if a character was found
seen_pointer = strchr(command_queue[cmd_queue_index_r], code);
return (seen_pointer != NULL); //Return True if a character was found
}
#define DEFINE_PGM_READ_ANY(type, reader) \
......@@ -2609,6 +2610,11 @@ void gcode_get_destination() {
}
}
void unknown_command_error() {
ECHO_SMV(DB, MSG_UNKNOWN_COMMAND, current_command);
ECHO_M("\"\n");
}
/**
* G0, G1: Coordinated movement of X Y Z E axes
*/
......@@ -3692,7 +3698,7 @@ inline void gcode_G92() {
* M1: // M1 - Conditional stop - Wait for user button press on LCD
*/
inline void gcode_M0_M1() {
char *src = strchr_pointer + 2;
char *src = seen_pointer + 2;
millis_t codenum = 0;
bool hasP = false, hasS = false;
......@@ -3826,7 +3832,7 @@ inline void gcode_M17() {
* M23: Select a file
*/
inline void gcode_M23() {
char* codepos = strchr_pointer + 4;
char* codepos = seen_pointer + 4;
char* starpos = strchr(codepos, '*');
if (starpos) *starpos = '\0';
card.openFile(codepos, true);
......@@ -3869,11 +3875,11 @@ inline void gcode_M17() {
* M28: Start SD Write
*/
inline void gcode_M28() {
char* codepos = strchr_pointer + 4;
char* codepos = seen_pointer + 4;
char* starpos = strchr(codepos, '*');
if (starpos) {
char* npos = strchr(command_queue[cmd_queue_index_r], 'N');
strchr_pointer = strchr(npos, ' ') + 1;
seen_pointer = strchr(npos, ' ') + 1;
*(starpos) = '\0';
}
card.openFile(codepos, false);
......@@ -3893,13 +3899,13 @@ inline void gcode_M17() {
inline void gcode_M30() {
if (card.cardOK) {
card.closeFile();
char* starpos = strchr(strchr_pointer + 4, '*');
char* starpos = strchr(seen_pointer + 4, '*');
if (starpos) {
char* npos = strchr(command_queue[cmd_queue_index_r], 'N');
strchr_pointer = strchr(npos, ' ') + 1;
seen_pointer = strchr(npos, ' ') + 1;
*(starpos) = '\0';
}
card.removeFile(strchr_pointer + 4);
card.removeFile(seen_pointer + 4);
}
}
#endif
......@@ -3927,46 +3933,60 @@ inline void gcode_M31() {
if (card.sdprinting)
st_synchronize();
char* codepos = strchr_pointer + 4;
char* namestartpos = strchr(codepos, '!'); //find ! to indicate filename string start.
if (! namestartpos)
namestartpos = codepos; //default name position, 4 letters after the M
char* namestartpos = strchr(current_command_args, '!'); // Find ! to indicate filename string start.
if (!namestartpos)
namestartpos = current_command_args; // Default name position, 4 letters after the M
else
namestartpos++; //to skip the '!'
char* starpos = strchr(codepos, '*');
if (starpos) *(starpos) = '\0';
namestartpos++; // to skip the '!'
bool call_procedure = code_seen('P') && (strchr_pointer < namestartpos);
bool call_procedure = code_seen('P') && (seen_pointer < namestartpos);
if (card.cardOK) {
card.openFile(namestartpos, true, !call_procedure);
if (code_seen('S') && strchr_pointer < namestartpos) // "S" (must occur _before_ the filename!)
if (code_seen('S') && seen_pointer < namestartpos) // "S" (must occur _before_ the filename!)
card.setIndex(code_value_short());
card.startFileprint();
if (!call_procedure) {
print_job_start_ms = millis(); //procedure calls count as normal print time.
#if HAS_POWER_CONSUMPTION_SENSOR
startpower = power_consumption_hour;
#endif
if (!call_procedure)
print_job_start_ms = millis(); // procedure calls count as normal print time.
}
}
#ifdef LONG_FILENAME_HOST_SUPPORT
/**
* M33: Get the long full path of a file or folder
*
* Parameters:
* <dospath> Case-insensitive DOS-style path to a file or folder
*
* Example:
* M33 miscel~1/armchair/armcha~1.gco
*
* Output:
* /Miscellaneous/Armchair/Armchair.gcode
*/
inline void gcode_M33() {
char *args = seen_pointer + 4;
while (*args == ' ') ++args;
clear_asterisk(args);
card.printLongPath(args);
}
#endif
/**
* M928: Start SD Write
*/
inline void gcode_M928() {
char* starpos = strchr(strchr_pointer + 5, '*');
char* starpos = strchr(seen_pointer + 5, '*');
if (starpos) {
char* npos = strchr(command_queue[cmd_queue_index_r], 'N');
strchr_pointer = strchr(npos, ' ') + 1;
seen_pointer = strchr(npos, ' ') + 1;
*(starpos) = '\0';
}
card.openLogFile(strchr_pointer + 5);
card.openLogFile(seen_pointer + 5);
}
#endif // SDSUPPORT
......@@ -4554,7 +4574,7 @@ inline void gcode_M115() {
* M117: Set LCD Status Message
*/
inline void gcode_M117() {
lcd_setstatus(strchr_pointer + 5);
lcd_setstatus(seen_pointer + 5);
}
#endif
......@@ -5889,8 +5909,7 @@ inline void gcode_M999() {
*
* F[mm/min] Set the movement feedrate
*/
inline void gcode_T() {
uint16_t tmp_extruder = code_value_short();
inline void gcode_T(uint8_t tmp_extruder) {
long csteps;
if (tmp_extruder >= EXTRUDERS) {
ECHO_SMV(DB, "T", tmp_extruder);
......@@ -6128,22 +6147,53 @@ inline void gcode_T() {
* This is called from the main loop()
*/
void process_next_command() {
current_command = command_queue[cmd_queue_index_r];
if ((debugLevel & DEBUG_ECHO)) {
ECHO_LV(DB, command_queue[cmd_queue_index_r]);
ECHO_LV(DB, current_command);
}
// Sanitize the current command:
// - Skip leading spaces
// - Bypass N...
// - Overwrite * with nul to mark the end
while (*current_command == ' ') ++current_command;
if (*current_command == 'N' && current_command[1] >= '0' && current_command[1] <= '9') {
while (*current_command != ' ') ++current_command;
while (*current_command == ' ') ++current_command;
}
char *starpos = strchr(current_command, '*'); // * should always be the last parameter
if (starpos) *starpos = '\0';
// Get the command code, which must be G, M, or T
char command_code = *current_command;
// The code must have a numeric value
bool code_is_good = (current_command[1] >= '0' && current_command[1] <= '9');
int codenum; // define ahead of goto
if(code_seen('G')) {
// Bail early if there's no code
if (!code_is_good) goto ExitUnknownCommand;
int codenum = code_value_short();
// Args pointer optimizes code_seen, especially those taking XYZEF
// This wastes a little cpu on commands that expect no arguments.
current_command_args = current_command;
while (*current_command_args != ' ') ++current_command_args;
while (*current_command_args == ' ') ++current_command_args;
switch (codenum) {
// Interpret the code int
seen_pointer = current_command;
codenum = code_value_short();
// Handle a known G, M, or T
switch(command_code) {
case 'G': switch (codenum) {
//G0 -> G1
case 0:
case 1:
gcode_G0_G1();
break;
gcode_G0_G1(); break;
// G2, G3
#ifndef SCARA
......@@ -6195,11 +6245,12 @@ void process_next_command() {
relative_mode = true; break;
case 92: // G92
gcode_G92(); break;
default: code_is_good = false;
}
}
break;
else if (code_seen('M')) {
switch(code_value_short()) {
case 'M': switch (codenum) {
#ifdef ULTIPANEL
case 0: // M0 - Unconditional stop - Wait for user button press on LCD
case 1: // M1 - Conditional stop - Wait for user button press on LCD
......@@ -6529,17 +6580,19 @@ void process_next_command() {
gcode_SET_Z_PROBE_OFFSET(); break;
#endif // CUSTOM_M_CODE_SET_Z_PROBE_OFFSET
default: code_is_good = false;
}
}
break;
else if (code_seen('T')) {
gcode_T();
case 'T':
gcode_T(codenum);
break;
}
else {
ECHO_SM(ER, MSG_UNKNOWN_COMMAND);
ECHO_EVM(command_queue[cmd_queue_index_r], "\"");
}
ExitUnknownCommand:
// Still unknown command? Throw an error
if (!code_is_good) unknown_command_error();
ok_to_send();
}
......
MarlinKimbra/conditionals.h
View file @ 89caa423
......@@ -226,6 +226,23 @@
#define CONDITIONALS_H
/**
* SINGLENOZZLE
*/
#ifdef SINGLENOZZLE
#define HOTENDS 1
#undef TEMP_SENSOR_1_AS_REDUNDANT
#else
#define HOTENDS EXTRUDERS
#endif
/**
* DRIVER_EXTRUDERS
*/
#if !defined(MKR4) && !defined(NPR2)
#define DRIVER_EXTRUDERS EXTRUDERS // This defines the number of Driver extruder
#endif
#ifndef __SAM3X8E__
#ifndef AT90USB
#define HardwareSerial_h // trick to disable the standard HWserial
......@@ -289,23 +306,6 @@
#define BAUDRATE 115200 // Baudrate setting to 115200 because serial monitor arduino function at max 115200 baudrate.
#endif
/**
* SINGLENOZZLE
*/
#ifdef SINGLENOZZLE
#define HOTENDS 1
#undef TEMP_SENSOR_1_AS_REDUNDANT
#else
#define HOTENDS EXTRUDERS
#endif
/**
* DRIVER_EXTRUDERS
*/
#if !defined(MKR4) && !defined(NPR2)
#define DRIVER_EXTRUDERS EXTRUDERS // This defines the number of Driver extruder
#endif
/**
* Axis lengths
*/
......
MarlinKimbra/stepper.cpp
View file @ 89caa423
......@@ -76,9 +76,10 @@ volatile long endstops_trigsteps[3] = { 0 };
volatile long endstops_stepsTotal, endstops_stepsDone;
static volatile char endstop_hit_bits = 0; // use X_MIN, Y_MIN, Z_MIN and Z_PROBE as BIT value
static char old_endstop_bits = 0; // use X_MIN, X_MAX... Z_MAX, Z_PROBE
#ifdef Z_DUAL_ENDSTOPS
static char old_dual_endstop_bits = 0; // actually only implemented for Z
#ifndef Z_DUAL_ENDSTOPS
static byte old_endstop_bits = 0; // use X_MIN, X_MAX... Z_MAX, Z_PROBE, Z2_MIN, Z2_MAX
#else
static uint16_t old_endstop_bits = 0; // use X_MIN, X_MAX... Z_MAX, Z_PROBE, Z2_MIN, Z2_MAX
#endif
#ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
......@@ -136,10 +137,10 @@ volatile signed char count_direction[NUM_AXIS] = { 1, 1, 1, 1 };
if (performing_homing) { \
if (Z_HOME_DIR > 0) {\
if (!(TEST(old_endstop_bits, Z_MAX) && (count_direction[Z_AXIS] > 0)) && !locked_z_motor) Z_STEP_WRITE(v); \
if (!(TEST(old_dual_endstop_bits, Z_MAX) && (count_direction[Z_AXIS] > 0)) && !locked_z2_motor) Z2_STEP_WRITE(v); \
if (!(TEST(old_endstop_bits, Z2_MAX) && (count_direction[Z_AXIS] > 0)) && !locked_z2_motor) Z2_STEP_WRITE(v); \
} else {\
if (!(TEST(old_endstop_bits, Z_MIN) && (count_direction[Z_AXIS] < 0)) && !locked_z_motor) Z_STEP_WRITE(v); \
if (!(TEST(old_dual_endstop_bits, Z_MIN) && (count_direction[Z_AXIS] < 0)) && !locked_z2_motor) Z2_STEP_WRITE(v); \
if (!(TEST(old_endstop_bits, Z2_MIN) && (count_direction[Z_AXIS] < 0)) && !locked_z2_motor) Z2_STEP_WRITE(v); \
} \
} else { \
Z_STEP_WRITE(v); \
......@@ -466,9 +467,10 @@ ISR(TIMER1_COMPA_vect) {
// Check endstops
if (check_endstops) {
char current_endstop_bits;
#ifdef Z_DUAL_ENDSTOPS
char current_dual_endstop_bits;
uint16_t current_endstop_bits;
#else
byte current_endstop_bits;
#endif
#define _ENDSTOP_PIN(AXIS, MINMAX) AXIS ##_## MINMAX ##_PIN
......@@ -477,16 +479,16 @@ ISR(TIMER1_COMPA_vect) {
#define _ENDSTOP_HIT(AXIS) endstop_hit_bits |= BIT(_ENDSTOP(AXIS, MIN))
#define _ENDSTOP(AXIS, MINMAX) AXIS ##_## MINMAX
// GET_ENDSTOP_STATUS: set the current endstop bits for an endstop to its status
#define GET_ENDSTOP_STATUS(endstop, AXIS, MINMAX) SET_BIT(endstop, _ENDSTOP(AXIS, MINMAX), (READ(_ENDSTOP_PIN(AXIS, MINMAX)) != _ENDSTOP_INVERTING(AXIS, MINMAX)))
// SET_ENDSTOP_BIT: set the current endstop bits for an endstop to its status
#define SET_ENDSTOP_BIT(AXIS, MINMAX) SET_BIT(current_endstop_bits, _ENDSTOP(AXIS, MINMAX), (READ(_ENDSTOP_PIN(AXIS, MINMAX)) != _ENDSTOP_INVERTING(AXIS, MINMAX)))
// COPY_BIT: copy the value of COPY_BIT to BIT in bits
#define COPY_BIT(bits, COPY_BIT, BIT) SET_BIT(bits, BIT, TEST(bits, COPY_BIT))
// TEST_ENDSTOP: test the old and the current status of an endstop
#define TEST_ENDSTOPS(AXIS, MINMAX) (TEST(current_endstop_bits, _ENDSTOP(AXIS, MINMAX)) && TEST(old_endstop_bits, _ENDSTOP(AXIS, MINMAX)))
// TEST_DUAL_ENDSTOP: same like TEST_ENDSTOP for dual endstops
#define TEST_DUAL_ENDSTOPS(AXIS, MINMAX) (TEST(current_dual_endstop_bits, _ENDSTOP(AXIS, MINMAX)) && TEST(old_dual_endstop_bits, _ENDSTOP(AXIS, MINMAX)))
#define TEST_ENDSTOP(ENDSTOP) (TEST(current_endstop_bits, ENDSTOP) && TEST(old_endstop_bits, ENDSTOP))
#define UPDATE_ENDSTOP(AXIS,MINMAX) \
GET_ENDSTOP_STATUS(current_endstop_bits, AXIS, MINMAX); \
if (TEST_ENDSTOPS(AXIS, MINMAX) && (current_block->steps[_AXIS(AXIS)] > 0)) { \
SET_ENDSTOP_BIT(AXIS, MINMAX); \
if (TEST_ENDSTOP(_ENDSTOP(AXIS, MINMAX)) && (current_block->steps[_AXIS(AXIS)] > 0)) { \
endstops_trigsteps[_AXIS(AXIS)] = count_position[_AXIS(AXIS)]; \
_ENDSTOP_HIT(AXIS); \
step_events_completed = current_block->step_event_count; \
......@@ -548,22 +550,20 @@ ISR(TIMER1_COMPA_vect) {
#if HAS_Z_MIN
#ifdef Z_DUAL_ENDSTOPS
GET_ENDSTOP_STATUS(current_endstop_bits, Z, MIN);
SET_ENDSTOP_BIT(Z, MIN);
#if HAS_Z2_MIN
GET_ENDSTOP_STATUS(current_dual_endstop_bits, Z, MIN);
SET_ENDSTOP_BIT(Z2, MIN);
#else
COPY_BIT(current_endstop_bits, Z_MIN, Z2_MIN)
#endif
bool z_test = TEST_ENDSTOPS(Z, MIN)
#if HAS_Z2_MIN
&& TEST_DUAL_ENDSTOPS(Z, MIN)
#endif
;
byte z_test = TEST_ENDSTOP(Z_MIN) << 0 + TEST_ENDSTOP(Z2_MIN) << 1; // bit 0 for Z, bit 1 for Z2
if (z_test && current_block->steps[Z_AXIS] > 0) {
if (z_test && current_block->steps[Z_AXIS] > 0) { // z_test = Z_MIN || Z2_MIN
endstops_trigsteps[Z_AXIS] = count_position[Z_AXIS];
endstop_hit_bits |= BIT(Z_MIN);
if (!performing_homing || (performing_homing && !z_test)) //if not performing home or if both endstops were trigged during homing...
step_events_completed = current_block->step_event_count;
if (!performing_homing || (performing_homing && !((~z_test) & 0x3))) //if not performing home or if both endstops were trigged during homing...
step_events_completed = current_block->step_event_count; //!((~z_test) & 0x3) = Z_MIN && Z2_MIN
}
#else // !Z_DUAL_ENDSTOPS
......@@ -573,10 +573,9 @@ ISR(TIMER1_COMPA_vect) {
#ifdef Z_PROBE_ENDSTOP
UPDATE_ENDSTOP(Z, PROBE);
GET_ENDSTOP_STATUS(current_endstop_bits, Z, PROBE);
SET_ENDSTOP_BIT(Z, PROBE);
if(TEST_ENDSTOPS(Z, PROBE))
{
if (TEST_ENDSTOP(Z_PROBE)) {
endstops_trigsteps[Z_AXIS] = count_position[Z_AXIS];
endstop_hit_bits |= BIT(Z_PROBE);
}
......@@ -587,22 +586,20 @@ ISR(TIMER1_COMPA_vect) {
#ifdef Z_DUAL_ENDSTOPS
GET_ENDSTOP_STATUS(current_endstop_bits, Z, MAX);
SET_ENDSTOP_BIT(Z, MAX);
#if HAS_Z2_MAX
GET_ENDSTOP_STATUS(current_dual_endstop_bits, Z, MAX);
SET_ENDSTOP_BIT(Z2, MAX);
#else
COPY_BIT(current_endstop_bits, Z_MAX, Z2_MAX)
#endif
bool z_test = TEST_ENDSTOPS(Z, MAX)
#if HAS_Z2_MAX
&& TEST_DUAL_ENDSTOPS(Z, MAX)
#endif
;
byte z_test = TEST_ENDSTOP(Z_MAX) << 0 + TEST_ENDSTOP(Z2_MAX) << 1; // bit 0 for Z, bit 1 for Z2
if (z_test && current_block->steps[Z_AXIS] > 0) {
if (z_test && current_block->steps[Z_AXIS] > 0) { // t_test = Z_MAX || Z2_MAX
endstops_trigsteps[Z_AXIS] = count_position[Z_AXIS];
endstop_hit_bits |= BIT(Z_MIN);
if (!performing_homing || (performing_homing && !z_test)) //if not performing home or if both endstops were trigged during homing...
step_events_completed = current_block->step_event_count;
if (!performing_homing || (performing_homing && !((~z_test) & 0x3))) //if not performing home or if both endstops were trigged during homing...
step_events_completed = current_block->step_event_count; //!((~z_test) & 0x3) = Z_MAX && Z2_MAX
}
#else // !Z_DUAL_ENDSTOPS
......@@ -614,9 +611,6 @@ ISR(TIMER1_COMPA_vect) {
}
old_endstop_bits = current_endstop_bits;
#ifdef Z_DUAL_ENDSTOPS
old_dual_endstop_bits = current_dual_endstop_bits;
#endif
}
......@@ -921,21 +915,21 @@ void st_init() {
#if HAS_X_MIN
SET_INPUT(X_MIN_PIN);
#ifdef ENDSTOPPULLUP_XMIN
WRITE(X_MIN_PIN, HIGH);
WRITE(X_MIN_PIN,HIGH);
#endif
#endif
#if HAS_Y_MIN
SET_INPUT(Y_MIN_PIN);
#ifdef ENDSTOPPULLUP_YMIN
WRITE(Y_MIN_PIN, HIGH);
WRITE(Y_MIN_PIN,HIGH);
#endif
#endif
#if HAS_Z_MIN
SET_INPUT(Z_MIN_PIN);
#ifdef ENDSTOPPULLUP_ZMIN
WRITE(Z_MIN_PIN, HIGH);
WRITE(Z_MIN_PIN,HIGH);
#endif
#endif
......@@ -949,35 +943,35 @@ void st_init() {
#if HAS_X_MAX
SET_INPUT(X_MAX_PIN);
#ifdef ENDSTOPPULLUP_XMAX
WRITE(X_MAX_PIN, HIGH);
WRITE(X_MAX_PIN,HIGH);
#endif
#endif
#if HAS_Y_MAX
SET_INPUT(Y_MAX_PIN);
#ifdef ENDSTOPPULLUP_YMAX
WRITE(Y_MAX_PIN, HIGH);
WRITE(Y_MAX_PIN,HIGH);
#endif
#endif
#if HAS_Z_MAX
SET_INPUT(Z_MAX_PIN);
#ifdef ENDSTOPPULLUP_ZMAX
WRITE(Z_MAX_PIN, HIGH);
WRITE(Z_MAX_PIN,HIGH);
#endif
#endif
#if HAS_Z2_MAX
SET_INPUT(Z2_MAX_PIN);
#ifdef ENDSTOPPULLUP_ZMAX
WRITE(Z2_MAX_PIN, HIGH);
WRITE(Z2_MAX_PIN,HIGH);
#endif
#endif
#if (defined(Z_PROBE_PIN) && Z_PROBE_PIN >= 0) && defined(Z_PROBE_ENDSTOP) // Check for Z_PROBE_ENDSTOP so we don't pull a pin high unless it's to be used.
SET_INPUT(Z_PROBE_PIN);
#ifdef ENDSTOPPULLUP_ZPROBE
WRITE(Z_PROBE_PIN, HIGH);
WRITE(Z_PROBE_PIN,HIGH);
#endif
#endif
......
MarlinKimbra/ultralcd_st7920_u8glib_rrd.h
View file @ 89caa423
......@@ -53,9 +53,9 @@ uint8_t u8g_dev_rrd_st7920_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, vo
{
case U8G_DEV_MSG_INIT:
{
OUT_WRITE(ST7920_CS_PIN, LOW);
OUT_WRITE(ST7920_DAT_PIN, LOW);
OUT_WRITE(ST7920_CLK_PIN, HIGH);
OUT_WRITE(ST7920_CS_PIN,LOW);
OUT_WRITE(ST7920_DAT_PIN,LOW);
OUT_WRITE(ST7920_CLK_PIN,HIGH);
ST7920_CS();
u8g_Delay(120); //initial delay for boot up
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment