Add Example Configuration Pins for K40

Documentation/Laser/K40_ramps_configs/Configuration_Pins.h

+#ifndef CONFIGURATION_PINS_H
+#define CONFIGURATION_PINS_H
+
+//=================================== BASIC ==================================
+
+// X axis pins
+#define X_STEP_PIN      ORIG_X_STEP_PIN
+#define X_DIR_PIN       ORIG_X_DIR_PIN
+#define X_ENABLE_PIN    ORIG_X_ENABLE_PIN
+
+// Y axis pins
+#define Y_STEP_PIN      ORIG_Y_STEP_PIN
+#define Y_DIR_PIN       ORIG_Y_DIR_PIN
+#define Y_ENABLE_PIN    ORIG_Y_ENABLE_PIN
+
+// Z axis pins
+#define Z_STEP_PIN      ORIG_Z_STEP_PIN
+#define Z_DIR_PIN       ORIG_Z_DIR_PIN
+#define Z_ENABLE_PIN    ORIG_Z_ENABLE_PIN
+
+// E axis pins
+#if DRIVER_EXTRUDERS > 0
+  #define E0_STEP_PIN   ORIG_E0_STEP_PIN
+  #define E0_DIR_PIN    ORIG_E0_DIR_PIN
+  #define E0_ENABLE_PIN ORIG_E0_ENABLE_PIN
+#endif
+
+#if DRIVER_EXTRUDERS > 1
+  #define E1_STEP_PIN   ORIG_E1_STEP_PIN
+  #define E1_DIR_PIN    ORIG_E1_DIR_PIN
+  #define E1_ENABLE_PIN ORIG_E1_ENABLE_PIN
+#endif
+
+#if DRIVER_EXTRUDERS > 2
+  #define E2_STEP_PIN   ORIG_E2_STEP_PIN
+  #define E2_DIR_PIN    ORIG_E2_DIR_PIN
+  #define E2_ENABLE_PIN ORIG_E2_ENABLE_PIN
+#endif
+
+#if DRIVER_EXTRUDERS > 3
+  #define E3_STEP_PIN   ORIG_E3_STEP_PIN
+  #define E3_DIR_PIN    ORIG_E3_DIR_PIN
+  #define E3_ENABLE_PIN ORIG_E3_ENABLE_PIN
+#endif
+
+#if DRIVER_EXTRUDERS > 4
+  #define E4_STEP_PIN   ORIG_E4_STEP_PIN
+  #define E4_DIR_PIN    ORIG_E4_DIR_PIN
+  #define E4_ENABLE_PIN ORIG_E4_ENABLE_PIN
+#endif
+
+#if DRIVER_EXTRUDERS > 5
+  #define E5_STEP_PIN   ORIG_E5_STEP_PIN
+  #define E5_DIR_PIN    ORIG_E5_DIR_PIN
+  #define E5_ENABLE_PIN ORIG_E5_ENABLE_PIN
+#endif
+
+// ENDSTOP pin
+#define X_MIN_PIN       ORIG_X_MIN_PIN
+#define X_MAX_PIN       ORIG_X_MAX_PIN
+#define Y_MIN_PIN       ORIG_Y_MIN_PIN
+#define Y_MAX_PIN       ORIG_Y_MAX_PIN
+#define Z_MIN_PIN       ORIG_Z_MIN_PIN
+#define Z_MAX_PIN       ORIG_Z_MAX_PIN
+
+// HEATER pin
+#define HEATER_0_PIN    ORIG_HEATER_0_PIN
+#define HEATER_1_PIN    ORIG_HEATER_1_PIN
+#define HEATER_2_PIN    ORIG_HEATER_2_PIN
+#define HEATER_3_PIN    ORIG_HEATER_3_PIN
+#define HEATER_BED_PIN  ORIG_HEATER_BED_PIN
+
+// TEMP pin
+#define TEMP_0_PIN      ORIG_TEMP_0_PIN
+#define TEMP_1_PIN      ORIG_TEMP_1_PIN
+#define TEMP_2_PIN      ORIG_TEMP_2_PIN
+#define TEMP_3_PIN      ORIG_TEMP_3_PIN
+#define TEMP_BED_PIN    ORIG_TEMP_BED_PIN
+
+// FAN pin
+#define FAN_PIN         ORIG_FAN_PIN
+
+// PS ON pin
+#define PS_ON_PIN       ORIG_PS_ON_PIN
+
+// BEEPER pin
+#define BEEPER_PIN      ORIG_BEEPER_PIN
+
+//============================================================================
+
+//================================= FEATURE ==================================
+
+#if ENABLED(MKR4)
+  #define E0E1_CHOICE_PIN -1
+  #define E0E2_CHOICE_PIN -1
+  #define E0E3_CHOICE_PIN -1
+  #define E1E3_CHOICE_PIN -1
+#endif
+
+#if ENABLED(NPR2)
+  #define E_MIN_PIN -1
+#endif
+
+#if ENABLED(LASERBEAM)
+  #define LASER_PWR_PIN -1
+  #define LASER_TTL_PIN -1
+#endif
+
+#if ENABLED(LASER)
+   #if LASER_CONTROL == 1
+      #define LASER_FIRING_PIN    5
+      #define LASER_INTENSITY_PIN -1
+   #endif
+   #if LASER_CONTROL == 2
+      #define LASER_INTENSITY_PIN 6 // Digital pins 2, 3, 5, 6, 7, 8 are attached to timers we can use
+      #define LASER_FIRING_PIN   5
+   #endif
+   #if DISABLED(ORIG_TEMP_COOLER_PIN)
+     #define TEMP_COOLER_PIN ORIG_TEMP_0_PIN // Default to the first thermistor
+   #endif
+   #if ENABLED(LASER_POWER_DOWN)
+      #define LASER_POWER_PIN 9 // This is currently hard-coded to timer2 which services pins 9, 10
+   #endif // LASER_POWER_DOWN
+   #if ENABLED(LASER_PERIPHERALS)
+      #define LASER_PERIPHERALS_PIN       11
+      #define LASER_PERIPHERALS_STATUS_PIN      4
+   #endif // LASER_PERIPHERALS
+   #if ENABLED(COOLER)
+      #define COOLER_PIN 2 // Digital pins 2, 3, 5, 6, 7, 8 are attached to timers we can use
+   #endif // COOLER
+#endif
+
+
+
+#if ENABLED(FILAMENT_RUNOUT_SENSOR)
+  #define FILRUNOUT_PIN -1
+#endif
+
+#if ENABLED(FILAMENT_SENSOR)
+  #define FILWIDTH_PIN -1
+#endif
+
+#if ENABLED(FLOWMETER_SENSOR)
+  #define FLOWMETER_PIN 21
+#endif
+
+#if ENABLED(POWER_CONSUMPTION)
+  #define POWER_CONSUMPTION_PIN -1
+#endif
+
+#if ENABLED(PHOTOGRAPH)
+  #define PHOTOGRAPH_PIN -1
+#endif
+
+#if ENABLED(CHDK)
+  #define CHDK_PIN -1
+#endif
+
+#if ENABLED(CONTROLLERFAN)
+  #define CONTROLLERFAN_PIN -1
+#endif
+
+#if ENABLED(EXTRUDER_AUTO_FAN)
+  #define EXTRUDER_0_AUTO_FAN_PIN -1
+  #define EXTRUDER_1_AUTO_FAN_PIN -1
+  #define EXTRUDER_2_AUTO_FAN_PIN -1
+  #define EXTRUDER_3_AUTO_FAN_PIN -1
+#endif
+
+#if ENABLED(X2_IS_TMC)
+  #define X2_ENABLE_PIN -1
+  #define X2_STEP_PIN   -1
+  #define X2_DIR_PIN    -1
+#endif
+
+#if ENABLED(Z_PROBE_SLED)
+  #define SLED_PIN -1
+#endif
+
+#if ENABLED(Z_PROBE_ENDSTOP)
+  #define Z_PROBE_PIN -1
+#endif
+
+//============================================================================
+
+#endif