Skip to content

M
MarlinKimbra
Commit 70821c6d authored by Simone Primarosa's avatar Simone Primarosa
Browse files
Options

Update 4.2.X apha 

Code clean
parent 55c929f1
Expand all Show whitespace changes
Inline Side-by-side
Showing with 544 additions and 540 deletions
MarlinKimbra/Configuration_Cartesian.h
View file @ 70821c6d
#ifndef CONFIGURATION_MECHANISM
#define CONFIGURATION_MECHANISM
#define KNOWN_MECH 1
/*
* This configuration file contains mechanism settings for cartesian printer.
*
......@@ -22,8 +22,8 @@
* - Homing feedrate
* - Hotend offset
*
* Basic-settings can be found in configuration_basic.h
* Feature-settings can be found in configuration_feature.h
* Basic-settings can be found in Configuration_Basic.h
* Feature-settings can be found in Configuration_Feature.h
*/
/*****************************************************************************************
......
MarlinKimbra/Configuration_Core.h
View file @ 70821c6d
#ifndef CONFIGURATION_MECHANISM
#define CONFIGURATION_MECHANISM
#define KNOWN_MECH 1
/*
* This configuration file contains mechanism settings for cartesian printer.
......@@ -23,8 +24,8 @@
* - Homing feedrate
* - Hotend offset
*
* Basic-settings can be found in configuration_basic.h
* Feature-settings can be found in configuration_feature.h
* Basic-settings can be found in Configuration_Basic.h
* Feature-settings can be found in Configuration_Feature.h
*/
/*****************************************************************************************
......
MarlinKimbra/Configuration_Delta.h
View file @ 70821c6d
#ifndef CONFIGURATION_MECHANISM
#define CONFIGURATION_MECHANISM
#define KNOWN_MECH 1
/*
* This configuration file contains mechanism settings for cartesian printer.
......@@ -22,8 +23,8 @@
* - Homing feedrate
* - Hotend offset
*
* Basic-settings can be found in configuration_basic.h
* Feature-settings can be found in configuration_feature.h
* Basic-settings can be found in Configuration_Basic.h
* Feature-settings can be found in Configuration_Feature.h
*/
/*****************************************************************************************
......
MarlinKimbra/Configuration_Scara.h
View file @ 70821c6d
#ifndef CONFIGURATION_MECHANISM
#define CONFIGURATION_MECHANISM
#define KNOWN_MECH 1
/*
* This configuration file contains mechanism settings for cartesian printer.
......@@ -23,8 +24,8 @@
* - Homing feedrate
* - Hotend offset
*
* Basic-settings can be found in configuration_basic.h
* Feature-settings can be found in configuration_feature.h
* Basic-settings can be found in Configuration_Basic.h
* Feature-settings can be found in Configuration_Feature.h
*/
/*****************************************************************************************
......
MarlinKimbra/M100_Free_Mem_Chk.cpp
View file @ 70821c6d
......@@ -23,7 +23,7 @@
#include "Marlin.h"
#ifdef M100_FREE_MEMORY_WATCHER
#if ENABLED(M100_FREE_MEMORY_WATCHER)
extern void *__brkval;
extern size_t __heap_start, __heap_end, __flp;
......@@ -59,7 +59,7 @@
// probably caused by bad pointers. Any unexpected values will be flagged in
// the right hand column to help spotting them.
//
#ifdef M100_FREE_MEMORY_DUMPER // Comment out to remove Dump sub-command
#if ENABLED(M100_FREE_MEMORY_DUMPER) // Comment out to remove Dump sub-command
if ( code_seen('D') ) {
ptr = (unsigned char *) __brkval;
......@@ -151,7 +151,7 @@
// M100 C x Corrupts x locations in the free memory pool and reports the locations of the corruption.
// This is useful to check the correctness of the M100 D and the M100 F commands.
//
#ifdef M100_FREE_MEMORY_CORRUPTOR
#if ENABLED(M100_FREE_MEMORY_CORRUPTOR)
if ( code_seen('C') ) {
int x; // x gets the # of locations to corrupt within the memory pool
x = code_value();
......
MarlinKimbra/Marlin.h
View file @ 70821c6d
......@@ -22,7 +22,7 @@
#include <avr/pgmspace.h>
#include <avr/interrupt.h>
#include "Configuration.h"
#include "Configuration_Basic.h"
#include "pins.h"
#ifndef SANITYCHECK_H
......@@ -225,7 +225,7 @@ extern float home_offset[3];
// Hotend offset
#if HOTENDS > 1
#ifndef DUAL_X_CARRIAGE
#if DISABLED(DUAL_X_CARRIAGE)
#define NUM_HOTEND_OFFSETS 2 // only in XY plane
#else
#define NUM_HOTEND_OFFSETS 3 // supports offsets in XYZ plane
......
MarlinKimbra/MarlinKimbra.ino
View file @ 70821c6d
......@@ -30,27 +30,27 @@
/* All the implementation is done in *.cpp files to get better compatibility with avr-gcc without the Arduino IDE */
/* Use this file to help the Arduino IDE find which Arduino libraries are needed and to keep documentation on GCode */
#include "Configuration.h"
#include "Configuration_Basic.h"
#include "pins.h"
#ifdef ULTRA_LCD
#if defined(LCD_I2C_TYPE_PCF8575)
#if ENABLED(ULTRA_LCD)
#if ENABLED(LCD_I2C_TYPE_PCF8575)
#include <Wire.h>
#include <LiquidCrystal_I2C.h>
#elif defined(LCD_I2C_TYPE_MCP23017) || defined(LCD_I2C_TYPE_MCP23008)
#elif ENABLED(LCD_I2C_TYPE_MCP23017) || ENABLED(LCD_I2C_TYPE_MCP23008)
#include <Wire.h>
#include <LiquidTWI2.h>
#elif defined(DOGLCD)
#elif ENABLED(DOGLCD)
#include <U8glib.h> // library for graphics LCD by Oli Kraus (https://code.google.com/p/u8glib/)
#else
#include <LiquidCrystal.h> // library for character LCD
#endif
#endif
#if defined(DIGIPOTSS_PIN) && DIGIPOTSS_PIN > -1
#if ENABLED(DIGIPOTSS_PIN) && DIGIPOTSS_PIN > -1
#include <SPI.h>
#endif
#if defined(DIGIPOT_I2C)
#if ENABLED(DIGIPOT_I2C)
#include <Wire.h>
#endif
MarlinKimbra/Marlin_main.cpp
View file @ 70821c6d
This diff is collapsed.
MarlinKimbra/SdBaseFile.cpp
View file @ 70821c6d
......@@ -1806,7 +1806,7 @@ int16_t SdBaseFile::write(const void* buf, uint16_t nbyte) {
}
//------------------------------------------------------------------------------
// suppress cpplint warnings with NOLINT comment
#if ALLOW_DEPRECATED_FUNCTIONS && !defined(DOXYGEN)
#if ALLOW_DEPRECATED_FUNCTIONS && DISABLED(DOXYGEN)
void (*SdBaseFile::oldDateTime_)(uint16_t& date, uint16_t& time) = 0; // NOLINT
#endif // ALLOW_DEPRECATED_FUNCTIONS
......
MarlinKimbra/SdBaseFile.h
View file @ 70821c6d
......@@ -364,7 +364,7 @@ class SdBaseFile {
uint8_t width, bool printSlash);
//------------------------------------------------------------------------------
// Deprecated functions - suppress cpplint warnings with NOLINT comment
#if ALLOW_DEPRECATED_FUNCTIONS && !defined(DOXYGEN)
#if ALLOW_DEPRECATED_FUNCTIONS && DISABLED(DOXYGEN)
public:
/** \deprecated Use:
* bool contiguousRange(uint32_t* bgnBlock, uint32_t* endBlock);
......
MarlinKimbra/SdVolume.h
View file @ 70821c6d
......@@ -193,7 +193,7 @@ class SdVolume {
}
//------------------------------------------------------------------------------
// Deprecated functions - suppress cpplint warnings with NOLINT comment
#if ALLOW_DEPRECATED_FUNCTIONS && !defined(DOXYGEN)
#if ALLOW_DEPRECATED_FUNCTIONS && DISABLED(DOXYGEN)
public:
/** \deprecated Use: bool SdVolume::init(Sd2Card* dev);
* \param[in] dev The SD card where the volume is located.
......
MarlinKimbra/conditionals.h
View file @ 70821c6d
......@@ -48,7 +48,7 @@
#define REPRAP_DISCOUNT_SMART_CONTROLLER
#endif
#ifdef SPARK_FULL_GRAPHICS
#if ENABLED(SPARK_FULL_GRAPHICS)
#define ENCODER_PULSES_PER_STEP 2
#define ENCODER_STEPS_PER_MENU_ITEM 1
......@@ -62,7 +62,7 @@
#define NEWPANEL
#endif
#ifdef RADDS_DISPLAY
#if ENABLED(RADDS_DISPLAY)
#define ENCODER_PULSES_PER_STEP 2
#define ENCODER_STEPS_PER_MENU_ITEM 1
......@@ -108,11 +108,11 @@
#define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
#define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD
#ifndef ENCODER_PULSES_PER_STEP
#if DISABLED(ENCODER_PULSES_PER_STEP)
#define ENCODER_PULSES_PER_STEP 4
#endif
#ifndef ENCODER_STEPS_PER_MENU_ITEM
#if DISABLED(ENCODER_STEPS_PER_MENU_ITEM)
#define ENCODER_STEPS_PER_MENU_ITEM 1
#endif
......@@ -232,7 +232,7 @@
/**
* DRIVER_EXTRUDERS
*/
#if !defined(MKR4) && !defined(NPR2)
#if DISABLED(MKR4) && DISABLED(NPR2)
#define DRIVER_EXTRUDERS EXTRUDERS // This defines the number of Driver extruder
#endif
......@@ -369,7 +369,7 @@
/**
* Servo Leveling
*/
#define SERVO_LEVELING (defined(SERVO_ENDSTOPS) && defined(DEACTIVATE_SERVOS_AFTER_MOVE))
#define SERVO_LEVELING (ENABLED(SERVO_ENDSTOPS) && ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE))
/**
* Sled Options
......@@ -427,7 +427,7 @@
* Power Signal Control Definitions
* By default use Normal definition
*/
#ifndef POWER_SUPPLY
#if DISABLED(POWER_SUPPLY)
#define POWER_SUPPLY 0
#endif
#if (POWER_SUPPLY == 1) // 1 = ATX
......@@ -556,7 +556,7 @@
#define HAS_AUTO_FAN (HAS_AUTO_FAN_0 || HAS_AUTO_FAN_1 || HAS_AUTO_FAN_2 || HAS_AUTO_FAN_3)
#define HAS_FAN (PIN_EXISTS(FAN))
#define HAS_CONTROLLERFAN (ENABLED(CONTROLLERFAN) && PIN_EXISTS(CONTROLLERFAN))
#define HAS_SERVOS (defined(NUM_SERVOS) && NUM_SERVOS > 0)
#define HAS_SERVOS (ENABLED(NUM_SERVOS) && NUM_SERVOS > 0)
#define HAS_SERVO_0 (PIN_EXISTS(SERVO0))
#define HAS_SERVO_1 (PIN_EXISTS(SERVO1))
#define HAS_SERVO_2 (PIN_EXISTS(SERVO2))
......@@ -630,8 +630,8 @@
/**
* Shorthand for filament sensor and power sensor for ultralcd.cpp, dogm_lcd_implementation.h, ultralcd_implementation_hitachi_HD44780.h
*/
#define HAS_LCD_FILAMENT_SENSOR (HAS_FILAMENT_SENSOR && defined(FILAMENT_LCD_DISPLAY))
#define HAS_LCD_POWER_SENSOR (HAS_POWER_CONSUMPTION_SENSOR && defined(POWER_CONSUMPTION_LCD_DISPLAY))
#define HAS_LCD_FILAMENT_SENSOR (HAS_FILAMENT_SENSOR && ENABLED(FILAMENT_LCD_DISPLAY))
#define HAS_LCD_POWER_SENSOR (HAS_POWER_CONSUMPTION_SENSOR && ENABLED(POWER_CONSUMPTION_LCD_DISPLAY))
/**
* Helper Macros for heaters and extruder fan
......@@ -642,7 +642,7 @@
#define WRITE_HEATER(pin,value) WRITE(pin,value)
#endif
#define WRITE_HEATER_0P(v) WRITE_HEATER(HEATER_0_PIN, v)
#if HOTENDS > 1 || defined(HEATERS_PARALLEL)
#if HOTENDS > 1 || ENABLED(HEATERS_PARALLEL)
#define WRITE_HEATER_1(v) WRITE_HEATER(HEATER_1_PIN, v)
#if HOTENDS > 2
#define WRITE_HEATER_2(v) WRITE_HEATER(HEATER_2_PIN, v)
......@@ -657,14 +657,14 @@
#define WRITE_HEATER_0(v) WRITE_HEATER_0P(v)
#endif
#if HAS_HEATER_BED
#ifdef INVERTED_BED_PINS
#if ENABLED(INVERTED_BED_PINS)
#define WRITE_HEATER_BED(v) WRITE(HEATER_BED_PIN,!v)
#else
#define WRITE_HEATER_BED(v) WRITE(HEATER_BED_PIN,v)
#endif
#endif
#if HAS_FAN
#ifdef INVERTED_HEATER_PINS
#if ENABLED(INVERTED_HEATER_PINS)
#define WRITE_FAN(v) WRITE(FAN_PIN, !v)
#else
#define WRITE_FAN(v) WRITE(FAN_PIN, v)
......@@ -674,7 +674,7 @@
/**
* Buzzer
*/
#define HAS_BUZZER (PIN_EXISTS(BEEPER) || defined(LCD_USE_I2C_BUZZER))
#define HAS_BUZZER (PIN_EXISTS(BEEPER) || ENABLED(LCD_USE_I2C_BUZZER))
/**
* Servos
......
MarlinKimbra/configuration_basic.h
View file @ 70821c6d
......@@ -2,7 +2,7 @@
#define CONFIGURATION_H
#include "macros.h"
#include "default_version.h"
#include "Default_Version.h"
/*
* This configuration file contains basic settings.
......@@ -15,8 +15,8 @@
* - Extruders number
* - UI Language
*
* Mechanisms-settings can be found in configuration_xxxxxx.h (where xxxxxx can be: cartesian - delta - core - scara)
* Feature-settings can be found in configuration_feature.h
* Mechanisms-settings can be found in Configuration_Xxxxxx.h (where Xxxxxx can be: Cartesian - Delta - Core - Scara)
* Feature-settings can be found in Configuration_Feature.h
*/
/***********************************************************************
......@@ -241,19 +241,19 @@
********************** Do not touch this section **********************
***********************************************************************/
#if MECH(CARTESIAN)
#include "configuration_cartesian.h"
#include "Configuration_Cartesian.h"
#elif MECH(COREXY)
#include "configuration_core.h"
#include "Configuration_Core.h"
#elif MECH(COREXZ)
#include "configuration_core.h"
#include "Configuration_Core.h"
#elif MECH(DELTA)
#include "configuration_delta.h"
#include "Configuration_Delta.h"
#elif MECH(SCARA)
#include "configuration_scara.h"
#include "Configuration_Scara.h"
#endif
#include "configuration_feature.h"
#include "configuration_overall.h"
#include "Configuration_Feature.h"
#include "Configuration_Overall.h"
#include "thermistortables.h"
#include "conditionals.h"
......
MarlinKimbra/configuration_feature.h
View file @ 70821c6d
#ifndef CONFIGURATION_FEATURE_H
#define CONFIGURATION_FEATURE_H
#ifndef Configuration_Feature_H
#define Configuration_Feature_H
/*
* This configuration file contains all features that can be enabled.
......@@ -68,8 +68,8 @@
* - Buffer stuff
* - Whatchdog
*
* Basic-settings can be found in configuration_basic.h
* Mechanisms-settings can be found in configuration_xxxxxx.h (where xxxxxx can be: cartesian - delta - core - scara)
* Basic-settings can be found in Configuration_Basic.h
* Mechanisms-settings can be found in Configuration_Xxxxxx.h (where Xxxxxx can be: Cartesian - Delta - Core - Scara)
*
*/
......
MarlinKimbra/configuration_store.cpp
View file @ 70821c6d
......@@ -418,7 +418,7 @@ void Config_ResetDefault() {
float tmp8[] = DEFAULT_Kd;
#endif // PIDTEMP
#if defined(HOTEND_OFFSET_X) && defined(HOTEND_OFFSET_Y)
#if ENABLED(HOTEND_OFFSET_X) && ENABLED(HOTEND_OFFSET_Y)
float tmp9[] = HOTEND_OFFSET_X;
float tmp10[] = HOTEND_OFFSET_Y;
#else
......@@ -569,14 +569,14 @@ void Config_ResetDefault() {
calculate_volumetric_multipliers();
#ifdef IDLE_OOZING_PREVENT
#if ENABLED(IDLE_OOZING_PREVENT)
IDLE_OOZING_enabled = true;
#endif
ECHO_LM(DB, "Hardcoded Default Settings Loaded");
}
#if !defined(DISABLE_M503)
#if DISABLED(DISABLE_M503)
/**
* Print Configuration Settings - M503
......
MarlinKimbra/dogm_lcd_implementation.h
View file @ 70821c6d
......@@ -33,7 +33,7 @@
#include "ultralcd.h"
#include "ultralcd_st7920_u8glib_rrd.h"
#include "Configuration.h"
#include "Configuration_Basic.h"
#if DISABLED(MAPPER_C2C3) && DISABLED(MAPPER_NON) && ENABLED(USE_BIG_EDIT_FONT)
#undef USE_BIG_EDIT_FONT
......@@ -106,7 +106,7 @@
#define LCD_WIDTH_EDIT 22
#endif
#ifndef TALL_FONT_CORRECTION
#if DISABLED(TALL_FONT_CORRECTION)
#define TALL_FONT_CORRECTION 0
#endif
......@@ -137,10 +137,10 @@
U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0); // HW-SPI Com: CS, A0
#endif
#ifndef LCD_PIXEL_WIDTH
#if DISABLED(LCD_PIXEL_WIDTH)
#define LCD_PIXEL_WIDTH 128
#endif
#ifndef LCD_PIXEL_HEIGHT
#if DISABLED(LCD_PIXEL_HEIGHT)
#define LCD_PIXEL_HEIGHT 64
#endif
......@@ -238,7 +238,7 @@ static void lcd_implementation_init() {
if (show_bootscreen) {
u8g.drawBitmapP(offx, offy, START_BMPBYTEWIDTH, START_BMPHEIGHT, start_bmp);
lcd_setFont(FONT_MENU);
#ifndef STRING_SPLASH_LINE2
#if DISABLED(STRING_SPLASH_LINE2)
u8g.drawStr(txt1X, u8g.getHeight() - DOG_CHAR_HEIGHT, STRING_SPLASH_LINE1);
#else
int txt2X = (u8g.getWidth() - (sizeof(STRING_SPLASH_LINE2) - 1)*DOG_CHAR_WIDTH) / 2;
......
MarlinKimbra/firmware_test.h
View file @ 70821c6d
......@@ -28,7 +28,7 @@ void FirmwareTest()
ECHO_EM(" ");
ECHO_EM("***** ENDSTOP X *****");
#if defined(X_MIN_PIN) && X_MIN_PIN > -1 && X_HOME_DIR == -1
#if ENABLED(X_MIN_PIN) && X_MIN_PIN > -1 && X_HOME_DIR == -1
if (!READ(X_MIN_PIN)^X_MIN_ENDSTOP_INVERTING) {
ECHO_M("MIN ENDSTOP X: ");
ECHO_EV(MSG_ENDSTOP_OPEN);
......@@ -70,7 +70,7 @@ void FirmwareTest()
ECHO_EV(MSG_FWTEST_ENDSTOP_ERR);
return;
}
#elif defined(X_MAX_PIN) && X_MAX_PIN > -1 && X_HOME_DIR == 1
#elif ENABLED(X_MAX_PIN) && X_MAX_PIN > -1 && X_HOME_DIR == 1
if (!READ(X_MAX_PIN)^X_MAX_ENDSTOP_INVERTING) {
ECHO_M("MAX ENDSTOP X: ");
ECHO_EV(MSG_ENDSTOP_OPEN);
......@@ -126,7 +126,7 @@ void FirmwareTest()
ECHO_EM(" ");
ECHO_EM("***** ENDSTOP Y *****");
#if defined(Y_MIN_PIN) && Y_MIN_PIN > -1 && Y_HOME_DIR == -1
#if ENABLED(Y_MIN_PIN) && Y_MIN_PIN > -1 && Y_HOME_DIR == -1
if (!READ(Y_MIN_PIN)^Y_MIN_ENDSTOP_INVERTING){
ECHO_M("MIN ENDSTOP Y: ");
ECHO_EV(MSG_ENDSTOP_OPEN);
......@@ -168,7 +168,7 @@ void FirmwareTest()
ECHO_EV(MSG_FWTEST_ENDSTOP_ERR);
return;
}
#elif defined(Y_MAX_PIN) && Y_MAX_PIN > -1 && Y_HOME_DIR == 1
#elif ENABLED(Y_MAX_PIN) && Y_MAX_PIN > -1 && Y_HOME_DIR == 1
if (!READ(Y_MAX_PIN)^Y_MAX_ENDSTOP_INVERTING){
ECHO_M("MAX ENDSTOP Y: ");
ECHO_EV(MSG_ENDSTOP_OPEN);
......@@ -224,7 +224,7 @@ void FirmwareTest()
ECHO_EM(" ");
ECHO_EM("***** ENDSTOP Z *****");
#if defined(Z_MIN_PIN) && Z_MIN_PIN > -1 && Z_HOME_DIR == -1
#if ENABLED(Z_MIN_PIN) && Z_MIN_PIN > -1 && Z_HOME_DIR == -1
if (!READ(Z_MIN_PIN)^Z_MIN_ENDSTOP_INVERTING){
ECHO_M("MIN ENDSTOP Z: ");
ECHO_EV(MSG_ENDSTOP_OPEN);
......@@ -266,7 +266,7 @@ void FirmwareTest()
ECHO_EV(MSG_FWTEST_ENDSTOP_ERR);
return;
}
#elif defined(Z_MAX_PIN) && Z_MAX_PIN > -1 && Z_HOME_DIR == 1
#elif ENABLED(Z_MAX_PIN) && Z_MAX_PIN > -1 && Z_HOME_DIR == 1
if (!READ(Z_MAX_PIN)^Z_MAX_ENDSTOP_INVERTING){
ECHO_M("MAX ENDSTOP Z: ");
ECHO_EV(MSG_ENDSTOP_OPEN);
......
MarlinKimbra/language.h
View file @ 70821c6d
#ifndef LANGUAGE_H
#define LANGUAGE_H
#include "Configuration.h"
#include "Configuration_Basic.h"
// NOTE: IF YOU CHANGE LANGUAGE FILES OR MERGE A FILE WITH CHANGES
//
// ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration.h"
// ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration_Basic.h"
// ==> ALSO TRY ALL AVAILABLE "LANGUAGE_CHOICE" OPTIONS
// See also documentation/LCDLanguageFont.md
......@@ -25,7 +25,7 @@
// 13 Basque-Euskera
// 14 Portuguese (Brazil)
#ifndef LANGUAGE_CHOICE
#if DISABLED(LANGUAGE_CHOICE)
#define LANGUAGE_CHOICE 7 // Pick your language from the list above
#endif
......@@ -49,24 +49,24 @@
#elif MB(SAV_MKI)
#define MACHINE_NAME "SAV MkI"
#define SOURCE_CODE_URL "https://github.com/fmalpartida/Marlin/tree/SAV-MkI-config"
#elif !defined(MACHINE_NAME)
#elif DISABLED(MACHINE_NAME)
#define MACHINE_NAME "3D Printer"
#endif
#ifdef CUSTOM_MACHINE_NAME
#if ENABLED(CUSTOM_MACHINE_NAME)
#undef MACHINE_NAME
#define MACHINE_NAME CUSTOM_MACHINE_NAME
#endif
#ifndef SOURCE_CODE_URL
#if DISABLED(SOURCE_CODE_URL)
#define SOURCE_CODE_URL "https://github.com/MagoKimbra/MarlinKimbra"
#endif
#ifndef BUILD_VERSION
#if DISABLED(BUILD_VERSION)
#define BUILD_VERSION "V4; MarlinKimbra for 4 extruder"
#endif
#ifndef MACHINE_UUID
#if DISABLED(MACHINE_UUID)
#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
#endif
......@@ -235,7 +235,7 @@
#define MSG_BED_LEVELLING_Z " Z: "
// LCD Menu Messages
#if !(defined( DISPLAY_CHARSET_HD44780_JAPAN ) || defined( DISPLAY_CHARSET_HD44780_WESTERN ) || defined( DISPLAY_CHARSET_HD44780_CYRILLIC ))
#if !(ENABLED( DISPLAY_CHARSET_HD44780_JAPAN ) || ENABLED( DISPLAY_CHARSET_HD44780_WESTERN ) || ENABLED( DISPLAY_CHARSET_HD44780_CYRILLIC ))
#define DISPLAY_CHARSET_HD44780_JAPAN
#endif
......
MarlinKimbra/language_an.h
View file @ 70821c6d
......@@ -158,7 +158,7 @@
#define MSG_DEBUG_DRYRUN "DEBUG DRYRUN ENABLED"
// Calibrate Delta
#ifdef DELTA
#if MECH(DELTA)
#define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
#define MSG_DELTA_CALIBRATE_Y "Calibrate Y"
......@@ -167,7 +167,7 @@
#endif // DELTA
// Scara
#ifdef SCARA
#if MECH(SCARA)
#define MSG_XSCALE "X Scale"
#define MSG_YSCALE "Y Scale"
#endif
......@@ -189,7 +189,7 @@
#define MSG_INVALID_POS_SLOT "Invalid slot, total slots: "
// Firmware Test
#ifdef FIRMWARE_TEST
#if ENABLED(FIRMWARE_TEST)
#define MSG_FWTEST_YES "Put the Y command to go next"
#define MSG_FWTEST_NO "Put the N command to go next"
#define MSG_FWTEST_YES_NO "Put the Y or N command to go next"
......
MarlinKimbra/language_ca.h
View file @ 70821c6d
......@@ -158,7 +158,7 @@
#define MSG_DEBUG_DRYRUN "DEBUG DRYRUN ENABLED"
// Calibrate Delta
#ifdef DELTA
#if MECH(DELTA)
#define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
#define MSG_DELTA_CALIBRATE_Y "Calibrate Y"
......@@ -167,7 +167,7 @@
#endif // DELTA
// Scara
#ifdef SCARA
#if MECH(SCARA)
#define MSG_XSCALE "X Scale"
#define MSG_YSCALE "Y Scale"
#endif
......@@ -189,7 +189,7 @@
#define MSG_INVALID_POS_SLOT "Invalid slot, total slots: "
// Firmware Test
#ifdef FIRMWARE_TEST
#if ENABLED(FIRMWARE_TEST)
#define MSG_FWTEST_YES "Put the Y command to go next"
#define MSG_FWTEST_NO "Put the N command to go next"
#define MSG_FWTEST_YES_NO "Put the Y or N command to go next"
......
MarlinKimbra/language_de.h
View file @ 70821c6d
......@@ -159,7 +159,7 @@
#define MSG_DEBUG_DRYRUN "DEBUG DRYRUN ENABLED"
// Calibrate Delta
#ifdef DELTA
#if MECH(DELTA)
#define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
#define MSG_DELTA_CALIBRATE_Y "Calibrate Y"
......@@ -168,7 +168,7 @@
#endif // DELTA
// Scara
#ifdef SCARA
#if MECH(SCARA)
#define MSG_XSCALE "X Scale"
#define MSG_YSCALE "Y Scale"
#endif
......@@ -190,7 +190,7 @@
#define MSG_INVALID_POS_SLOT "Invalid slot, total slots: "
// Firmware Test
#ifdef FIRMWARE_TEST
#if ENABLED(FIRMWARE_TEST)
#define MSG_FWTEST_YES "Put the Y command to go next"
#define MSG_FWTEST_NO "Put the N command to go next"
#define MSG_FWTEST_YES_NO "Put the Y or N command to go next"
......
MarlinKimbra/language_en.h
View file @ 70821c6d
......@@ -8,12 +8,12 @@
#ifndef LANGUAGE_EN_H
#define LANGUAGE_EN_H
#if !( defined(MAPPER_NON)|| defined(MAPPER_C2C3)|| defined(MAPPER_D0D1)|| defined(MAPPER_D0D1_MOD)|| defined(MAPPER_E382E383) )
#if !( ENABLED(MAPPER_NON)|| ENABLED(MAPPER_C2C3)|| ENABLED(MAPPER_D0D1)|| ENABLED(MAPPER_D0D1_MOD)|| ENABLED(MAPPER_E382E383) )
#define MAPPER_NON // For direct asci codes
#endif
//#define SIMULATE_ROMFONT //Comment in to see what is seen on the character based displays
#if !( defined(SIMULATE_ROMFONT)|| defined(DISPLAY_CHARSET_ISO10646_1)|| defined(DISPLAY_CHARSET_ISO10646_5)|| defined(DISPLAY_CHARSET_ISO10646_KANA)|| defined(DISPLAY_CHARSET_ISO10646_CN) )
#if !( ENABLED(SIMULATE_ROMFONT)|| ENABLED(DISPLAY_CHARSET_ISO10646_1)|| ENABLED(DISPLAY_CHARSET_ISO10646_5)|| ENABLED(DISPLAY_CHARSET_ISO10646_KANA)|| ENABLED(DISPLAY_CHARSET_ISO10646_CN) )
#define DISPLAY_CHARSET_ISO10646_1 // use the better font on full graphic displays.
#endif
......@@ -168,7 +168,7 @@
#define MSG_DEBUG_DRYRUN "DEBUG DRYRUN ENABLED"
// Calibrate Delta
#ifdef DELTA
#if MECH(DELTA)
#define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
#define MSG_DELTA_CALIBRATE_Y "Calibrate Y"
......@@ -177,7 +177,7 @@
#endif // DELTA
// Scara
#ifdef SCARA
#if MECH(SCARA)
#define MSG_XSCALE "X Scale"
#define MSG_YSCALE "Y Scale"
#endif
......@@ -199,7 +199,7 @@
#define MSG_INVALID_POS_SLOT "Invalid slot, total slots: "
// Firmware Test
#ifdef FIRMWARE_TEST
#if ENABLED(FIRMWARE_TEST)
#define MSG_FWTEST_YES "Put the Y command to go next"
#define MSG_FWTEST_NO "Put the N command to go next"
#define MSG_FWTEST_YES_NO "Put the Y or N command to go next"
......
MarlinKimbra/language_es.h
View file @ 70821c6d
......@@ -158,7 +158,7 @@
#define MSG_DEBUG_DRYRUN "DEBUG DRYRUN ENABLED"
// Calibrate Delta
#ifdef DELTA
#if MECH(DELTA)
#define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
#define MSG_DELTA_CALIBRATE_Y "Calibrate Y"
......@@ -167,7 +167,7 @@
#endif // DELTA
// Scara
#ifdef SCARA
#if MECH(SCARA)
#define MSG_XSCALE "X Scale"
#define MSG_YSCALE "Y Scale"
#endif
......@@ -189,7 +189,7 @@
#define MSG_INVALID_POS_SLOT "Invalid slot, total slots: "
// Firmware Test
#ifdef FIRMWARE_TEST
#if ENABLED(FIRMWARE_TEST)
#define MSG_FWTEST_YES "Put the Y command to go next"
#define MSG_FWTEST_NO "Put the N command to go next"
#define MSG_FWTEST_YES_NO "Put the Y or N command to go next"
......
MarlinKimbra/language_eu.h
View file @ 70821c6d
......@@ -143,7 +143,7 @@
#define MSG_ERR_MINTEMP "Err: MINTEMP"
#define MSG_ERR_MAXTEMP_BED "Err: MAXTEMP BED"
#ifdef DELTA
#if MECH(DELTA)
#define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
#define MSG_DELTA_CALIBRATE_Y "Calibrate Y"
......@@ -151,7 +151,7 @@
#define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center"
#endif // DELTA
#ifdef SCARA
#if MECH(SCARA)
#define MSG_XSCALE "X Scale"
#define MSG_YSCALE "Y Scale"
#endif
......@@ -164,7 +164,7 @@
#define MSG_PURGE_XMM "Purge " STRINGIFY(LCD_PURGE_LENGTH) "mm"
#define MSG_RETRACT_XMM "Retract " STRINGIFY(LCD_RETRACT_LENGTH) "mm"
#ifdef FIRMWARE_TEST
#if ENABLED(FIRMWARE_TEST)
#define MSG_FWTEST_YES "Put the Y command to go next"
#define MSG_FWTEST_NO "Put the N command to go next"
#define MSG_FWTEST_YES_NO "Put the Y or N command to go next"
......
MarlinKimbra/language_fi.h
View file @ 70821c6d
......@@ -143,7 +143,7 @@
#define MSG_ERR_MINTEMP "Err: MINTEMP"
#define MSG_ERR_MAXTEMP_BED "Err: MAXTEMP BED"
#ifdef DELTA
#if MECH(DELTA)
#define MSG_DELTA_CALIBRATE "Delta Kalibrointi"
#define MSG_DELTA_CALIBRATE_X "Kalibroi X"
#define MSG_DELTA_CALIBRATE_Y "Kalibroi Y"
......@@ -151,7 +151,7 @@
#define MSG_DELTA_CALIBRATE_CENTER "Kalibroi Center"
#endif // DELTA
#ifdef SCARA
#if MECH(SCARA)
#define MSG_XSCALE "X Scale"
#define MSG_YSCALE "Y Scale"
#endif
......@@ -164,7 +164,7 @@
#define MSG_PURGE_XMM "Purge " STRINGIFY(LCD_PURGE_LENGTH) "mm"
#define MSG_RETRACT_XMM "Retract " STRINGIFY(LCD_RETRACT_LENGTH) "mm"
#ifdef FIRMWARE_TEST
#if ENABLED(FIRMWARE_TEST)
#define MSG_FWTEST_YES "Put the Y command to go next"
#define MSG_FWTEST_NO "Put the N command to go next"
#define MSG_FWTEST_YES_NO "Put the Y or N command to go next"
......
MarlinKimbra/language_fr.h
View file @ 70821c6d
......@@ -146,7 +146,7 @@
#define MSG_ERR_MINTEMP "Err: MINTEMP"
#define MSG_ERR_MAXTEMP_BED "Err: MAXTEMP BED"
#ifdef DELTA
#if MECH(DELTA)
#define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
#define MSG_DELTA_CALIBRATE_Y "Calibrate Y"
......@@ -154,7 +154,7 @@
#define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center"
#endif // DELTA
#ifdef SCARA
#if MECH(SCARA)
#define MSG_XSCALE "X Scale"
#define MSG_YSCALE "Y Scale"
#endif
......@@ -167,7 +167,7 @@
#define MSG_PURGE_XMM "Purge " STRINGIFY(LCD_PURGE_LENGTH) "mm"
#define MSG_RETRACT_XMM "Retract " STRINGIFY(LCD_RETRACT_LENGTH) "mm"
#ifdef FIRMWARE_TEST
#if ENABLED(FIRMWARE_TEST)
#define MSG_FWTEST_YES "Put the Y command to go next"
#define MSG_FWTEST_NO "Put the N command to go next"
#define MSG_FWTEST_YES_NO "Put the Y or N command to go next"
......
MarlinKimbra/language_it.h
View file @ 70821c6d
......@@ -163,7 +163,7 @@
#define MSG_DEBUG_DRYRUN "DEBUG STAMPA A VUOTO"
// Calibrate Delta
#ifdef DELTA
#if MECH(DELTA)
#define MSG_DELTA_CALIBRATE "Calibraz. Delta"
#define MSG_DELTA_CALIBRATE_X "Calibra X"
#define MSG_DELTA_CALIBRATE_Y "Calibra Y"
......@@ -172,7 +172,7 @@
#endif // DELTA
// Scara
#ifdef SCARA
#if MECH(SCARA)
#define MSG_XSCALE "X Scale"
#define MSG_YSCALE "Y Scale"
#endif
......@@ -194,7 +194,7 @@
#define MSG_INVALID_POS_SLOT "Slot invalido, slot totali: "
// Firmware Test
#ifdef FIRMWARE_TEST
#if ENABLED(FIRMWARE_TEST)
#define MSG_FWTEST_YES "Dai il comando Y per andare avanti"
#define MSG_FWTEST_NO "Dai il comando N per andare avanti"
#define MSG_FWTEST_YES_NO "Dai il comando Y o N per andare avanti"
......
MarlinKimbra/language_nl.h
View file @ 70821c6d
......@@ -143,7 +143,7 @@
#define MSG_ERR_MINTEMP "Err: MINTEMP"
#define MSG_ERR_MAXTEMP_BED "Err: MAXTEMP BED"
#ifdef DELTA
#if MECH(DELTA)
#define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
#define MSG_DELTA_CALIBRATE_Y "Calibrate Y"
......@@ -151,7 +151,7 @@
#define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center"
#endif // DELTA
#ifdef SCARA
#if MECH(SCARA)
#define MSG_XSCALE "X Scale"
#define MSG_YSCALE "Y Scale"
#endif
......@@ -164,7 +164,7 @@
#define MSG_PURGE_XMM "Purge " STRINGIFY(LCD_PURGE_LENGTH) "mm"
#define MSG_RETRACT_XMM "Retract " STRINGIFY(LCD_RETRACT_LENGTH) "mm"
#ifdef FIRMWARE_TEST
#if ENABLED(FIRMWARE_TEST)
#define MSG_FWTEST_YES "Put the Y command to go next"
#define MSG_FWTEST_NO "Put the N command to go next"
#define MSG_FWTEST_YES_NO "Put the Y or N command to go next"
......
MarlinKimbra/language_pl.h
View file @ 70821c6d
......@@ -143,7 +143,7 @@
#define MSG_ERR_MINTEMP "Err: MINTEMP"
#define MSG_ERR_MAXTEMP_BED "Err: MAXTEMP BED"
#ifdef DELTA
#if MECH(DELTA)
#define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
#define MSG_DELTA_CALIBRATE_Y "Calibrate Y"
......@@ -151,7 +151,7 @@
#define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center"
#endif // DELTA
#ifdef SCARA
#if MECH(SCARA)
#define MSG_XSCALE "X Scale"
#define MSG_YSCALE "Y Scale"
#endif
......@@ -164,7 +164,7 @@
#define MSG_PURGE_XMM "Purge " STRINGIFY(LCD_PURGE_LENGTH) "mm"
#define MSG_RETRACT_XMM "Retract " STRINGIFY(LCD_RETRACT_LENGTH) "mm"
#ifdef FIRMWARE_TEST
#if ENABLED(FIRMWARE_TEST)
#define MSG_FWTEST_YES "Put the Y command to go next"
#define MSG_FWTEST_NO "Put the N command to go next"
#define MSG_FWTEST_YES_NO "Put the Y or N command to go next"
......
MarlinKimbra/language_pt-br.h
View file @ 70821c6d
......@@ -8,12 +8,12 @@
#ifndef LANGUAGE_PT_BR_H
#define LANGUAGE_PT_BR_H
#if !( defined(MAPPER_NON)|| defined(MAPPER_C2C3)|| defined(MAPPER_D0D1)|| defined(MAPPER_D0D1_MOD)|| defined(MAPPER_E382E383) )
#if !( ENABLED(MAPPER_NON)|| ENABLED(MAPPER_C2C3)|| ENABLED(MAPPER_D0D1)|| ENABLED(MAPPER_D0D1_MOD)|| ENABLED(MAPPER_E382E383) )
#define MAPPER_NON // For direct asci codes
#endif
//#define SIMULATE_ROMFONT //Comment in to see what is seen on the character based displays
#if !( defined(SIMULATE_ROMFONT)|| defined(DISPLAY_CHARSET_ISO10646_1)|| defined(DISPLAY_CHARSET_ISO10646_5)|| defined(DISPLAY_CHARSET_ISO10646_KANA) )
#if !( ENABLED(SIMULATE_ROMFONT)|| ENABLED(DISPLAY_CHARSET_ISO10646_1)|| ENABLED(DISPLAY_CHARSET_ISO10646_5)|| ENABLED(DISPLAY_CHARSET_ISO10646_KANA) )
#define DISPLAY_CHARSET_ISO10646_1 // use the better font on full graphic displays.
#endif
......@@ -152,7 +152,7 @@
#define MSG_ERR_MAXTEMP_BED "Err: MAXTEMP BED"
#ifdef DELTA
#if MECH(DELTA)
#define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
#define MSG_DELTA_CALIBRATE_Y "Calibrate Y"
......@@ -160,7 +160,7 @@
#define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center"
#endif // DELTA
#ifdef SCARA
#if MECH(SCARA)
#define MSG_XSCALE "X Scale"
#define MSG_YSCALE "Y Scale"
#endif
......@@ -172,7 +172,7 @@
#define MSG_PURGE_XMM "Purge " STRINGIFY(LCD_PURGE_LENGTH) "mm"
#define MSG_RETRACT_XMM "Retract " STRINGIFY(LCD_RETRACT_LENGTH) "mm"
#ifdef FIRMWARE_TEST
#if ENABLED(FIRMWARE_TEST)
#define MSG_FWTEST_YES "Put the Y command to go next"
#define MSG_FWTEST_NO "Put the N command to go next"
#define MSG_FWTEST_YES_NO "Put the Y or N command to go next"
......
MarlinKimbra/language_pt.h
View file @ 70821c6d
......@@ -143,7 +143,7 @@
#define MSG_ERR_MINTEMP "Err: MINTEMP"
#define MSG_ERR_MAXTEMP_BED "Err: MAXTEMP BED"
#ifdef DELTA
#if MECH(DELTA)
#define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
#define MSG_DELTA_CALIBRATE_Y "Calibrate Y"
......@@ -151,7 +151,7 @@
#define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center"
#endif // DELTA
#ifdef SCARA
#if MECH(SCARA)
#define MSG_XSCALE "X Scale"
#define MSG_YSCALE "Y Scale"
#endif
......@@ -164,7 +164,7 @@
#define MSG_PURGE_XMM "Purge " STRINGIFY(LCD_PURGE_LENGTH) "mm"
#define MSG_RETRACT_XMM "Retract " STRINGIFY(LCD_RETRACT_LENGTH) "mm"
#ifdef FIRMWARE_TEST
#if ENABLED(FIRMWARE_TEST)
#define MSG_FWTEST_YES "Put the Y command to go next"
#define MSG_FWTEST_NO "Put the N command to go next"
#define MSG_FWTEST_YES_NO "Put the Y or N command to go next"
......
MarlinKimbra/language_ru.h
View file @ 70821c6d
......@@ -143,7 +143,7 @@
#define MSG_ERR_MINTEMP "Err: MINTEMP"
#define MSG_ERR_MAXTEMP_BED "Err: MAXTEMP BED"
#ifdef DELTA
#if MECH(DELTA)
#define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
#define MSG_DELTA_CALIBRATE_Y "Calibrate Y"
......@@ -151,7 +151,7 @@
#define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center"
#endif // DELTA
#ifdef SCARA
#if MECH(SCARA)
#define MSG_XSCALE "X Scale"
#define MSG_YSCALE "Y Scale"
#endif
......@@ -164,7 +164,7 @@
#define MSG_PURGE_XMM "Purge " STRINGIFY(LCD_PURGE_LENGTH) "mm"
#define MSG_RETRACT_XMM "Retract " STRINGIFY(LCD_RETRACT_LENGTH) "mm"
#ifdef FIRMWARE_TEST
#if ENABLED(FIRMWARE_TEST)
#define MSG_FWTEST_YES "Put the Y command to go next"
#define MSG_FWTEST_NO "Put the N command to go next"
#define MSG_FWTEST_YES_NO "Put the Y or N command to go next"
......
MarlinKimbra/pins.h
View file @ 70821c6d
This diff is collapsed.
MarlinKimbra/planner.cpp
View file @ 70821c6d
......@@ -109,7 +109,7 @@ static float previous_nominal_speed; // Nominal speed of previous path line se
unsigned char g_uc_extruder_last_move[4] = {0,0,0,0};
#ifdef XY_FREQUENCY_LIMIT
#if ENABLED(XY_FREQUENCY_LIMIT)
// Used for the frequency limit
#define MAX_FREQ_TIME (1000000.0/XY_FREQUENCY_LIMIT)
// Old direction bits. Used for speed calculations
......@@ -429,7 +429,7 @@ void check_axes_activity() {
}
#if HAS(FAN)
#ifdef FAN_KICKSTART_TIME
#if ENABLED(FAN_KICKSTART_TIME)
static millis_t fan_kick_end;
if (tail_fan_speed) {
millis_t ms = millis();
......@@ -803,7 +803,7 @@ float junction_deviation = 0.1;
if (segment_time < minsegmenttime) {
// buffer is draining, add extra time. The amount of time added increases if the buffer is still emptied more.
inverse_second = 1000000.0 / (segment_time + lround(2 * (minsegmenttime - segment_time) / moves_queued));
#ifdef XY_FREQUENCY_LIMIT
#if ENABLED(XY_FREQUENCY_LIMIT)
segment_time = lround(1000000.0 / inverse_second);
#endif
}
......@@ -850,7 +850,7 @@ float junction_deviation = 0.1;
}
// Max segement time in us.
#ifdef XY_FREQUENCY_LIMIT
#if ENABLED(XY_FREQUENCY_LIMIT)
#define MAX_FREQ_TIME (1000000.0 / XY_FREQUENCY_LIMIT)
// Check and limit the xy direction change frequency
......
MarlinKimbra/sanitycheck.h
View file @ 70821c6d
......@@ -95,7 +95,7 @@
#if NUM_SERVOS > 4
#error The maximum number of SERVOS in Marlin is 4.
#endif
#if defined(NUM_SERVOS) && NUM_SERVOS > 0
#if ENABLED(NUM_SERVOS) && NUM_SERVOS > 0
#if X_ENDSTOP_SERVO_NR >= 0 || Y_ENDSTOP_SERVO_NR >= 0 || Z_ENDSTOP_SERVO_NR >= 0
#if X_ENDSTOP_SERVO_NR >= NUM_SERVOS
#error X_ENDSTOP_SERVO_NR must be smaller than NUM_SERVOS.
......@@ -143,23 +143,24 @@
* Require a Z Probe Pin if Z_PROBE_ENDSTOP is enabled.
*/
#if ENABLED(Z_PROBE_ENDSTOP)
#ifndef Z_PROBE_PIN
#if DISABLED(Z_PROBE_PIN)
#error You must have a Z_PROBE_PIN defined in pins2tool.h file if you enable Z_PROBE_ENDSTOP.
#erro sistema pins2tool.h
#endif
#if Z_PROBE_PIN == -1
#error You must set Z_PROBE_PIN to a valid pin if you enable Z_PROBE_ENDSTOP.
#endif
// Forcing Servo definitions can break some hall effect sensor setups. Leaving these here for further comment.
// #ifndef NUM_SERVOS
// #if DISABLED(NUM_SERVOS)
// #error You must have NUM_SERVOS defined and there must be at least 1 configured to use Z_PROBE_ENDSTOP.
// #endif
// #if defined(NUM_SERVOS) && NUM_SERVOS < 1
// #if ENABLED(NUM_SERVOS) && NUM_SERVOS < 1
// #error You must have at least 1 servo defined for NUM_SERVOS to use Z_PROBE_ENDSTOP.
// #endif
// #if Z_ENDSTOP_SERVO_NR < 0
// #error You must have Z_ENDSTOP_SERVO_NR set to at least 0 or above to use Z_PROBE_ENDSTOP.
// #endif
// #ifndef SERVO_ENDSTOP_ANGLES
// #if DISABLED(ERVO_ENDSTOP_ANGLES)
// #error You must have SERVO_ENDSTOP_ANGLES defined for Z Extend and Retract to use Z_PROBE_ENDSTOP.
// #endif
#endif
......@@ -208,7 +209,7 @@
/**
* ULTIPANEL encoder
*/
#if ENABLED(ULTIPANEL) && DISABLED(NEWPANEL) && DISABLED(SR_LCD_2W_NL) && !defined(SHIFT_CLK)
#if ENABLED(ULTIPANEL) && DISABLED(NEWPANEL) && DISABLED(SR_LCD_2W_NL) && DISABLED(SHIFT_CLK)
#error ULTIPANEL requires some kind of encoder.
#endif
......@@ -216,7 +217,7 @@
* Delta & Z_PROBE_ENDSTOP
*/
#if MECH(DELTA) && ENABLED(Z_PROBE_ENDSTOP)
#ifndef Z_PROBE_PIN
#if DISABLED(Z_PROBE_PIN)
#error You must have a Z_PROBE_PIN defined in your pins2tool.h file if you enable Z_PROBE_ENDSTOP
#endif
#if Z_PROBE_PIN == -1
......@@ -230,7 +231,7 @@
#if ENABLED(DUAL_X_CARRIAGE)
#if EXTRUDERS == 1 || MECH(COREXY) \
|| HASNT(X2_ENABLE) || HASNT(X2_STEP) || HASNT(X2_DIR) \
|| !defined(X2_HOME_POS) || !defined(X2_MIN_POS) || !defined(X2_MAX_POS) \
|| DISABLED(X2_HOME_POS) || DISABLED(X2_MIN_POS) || DISABLED(X2_MAX_POS) \
|| HASNT(X_MAX)
#error Missing or invalid definitions for DUAL_X_CARRIAGE mode.
#endif
......@@ -269,7 +270,7 @@
#if HASNT(HEATER_2)
#error HEATER_2_PIN not defined for this board
#endif
#elif HOTENDS > 1 || defined(HEATERS_PARALLEL)
#elif HOTENDS > 1 || ENABLED(HEATERS_PARALLEL)
#if HASNT(HEATER_1)
#error HEATER_1_PIN not defined for this board
#endif
......@@ -286,7 +287,7 @@
/**
* Warnings for old configurations
*/
#ifdef X_HOME_RETRACT_MM
#if ENABLED(X_HOME_RETRACT_MM)
#error [XYZ]_HOME_RETRACT_MM settings have been renamed [XYZ]_HOME_BUMP_MM.
#endif
......@@ -294,11 +295,11 @@
#error WATCH_TEMP_PERIOD now uses seconds instead of milliseconds.
#endif
#if DISABLED(THERMAL_PROTECTION_HOTENDS) && (defined(WATCH_TEMP_PERIOD) || defined(THERMAL_PROTECTION_PERIOD))
#if DISABLED(THERMAL_PROTECTION_HOTENDS) && (ENABLED(WATCH_TEMP_PERIOD) || ENABLED(THERMAL_PROTECTION_PERIOD))
#error Thermal Runaway Protection for hotends must now be enabled with THERMAL_PROTECTION_HOTENDS.
#endif
#if DISABLED(THERMAL_PROTECTION_BED) && defined(THERMAL_PROTECTION_BED_PERIOD)
#if DISABLED(THERMAL_PROTECTION_BED) && ENABLED(THERMAL_PROTECTION_BED_PERIOD)
#error Thermal Runaway Protection for the bed must now be enabled with THERMAL_PROTECTION_BED.
#endif
......@@ -310,11 +311,11 @@
#error "Z_LATE_ENABLE can't be used with COREXZ."
#endif
#ifdef BEEPER
#if ENABLED(BEEPER)
#error BEEPER has been replaced with BEEPER_PIN. Please update your pins definitions.
#endif
#ifdef SDCARDDETECT
#if ENABLED(SDCARDDETECT)
#error SDCARDDETECT is now SD_DETECT_PIN. Please update your pins definitions.
#endif
......
MarlinKimbra/servo.cpp
View file @ 70821c6d
......@@ -43,7 +43,7 @@
detach() - Stops an attached servos from pulsing its i/o pin.
*/
#include "Configuration.h"
#include "Configuration_Basic.h"
#if HAS(SERVOS)
......@@ -103,15 +103,15 @@ static inline void handle_interrupts(timer16_Sequence_t timer, volatile uint16_t
#ifndef WIRING // Wiring pre-defines signal handlers so don't define any if compiling for the Wiring platform
// Interrupt handlers for Arduino
#if ENABLED(_useTimer1)
#ifdef _useTimer1
SIGNAL (TIMER1_COMPA_vect) { handle_interrupts(_timer1, &TCNT1, &OCR1A); }
#endif
#if ENABLED(_useTimer3)
#ifdef _useTimer3
SIGNAL (TIMER3_COMPA_vect) { handle_interrupts(_timer3, &TCNT3, &OCR3A); }
#endif
#if ENABLED(_useTimer4)
#ifdef _useTimer4
SIGNAL (TIMER4_COMPA_vect) { handle_interrupts(_timer4, &TCNT4, &OCR4A); }
#endif
......@@ -122,10 +122,10 @@ static inline void handle_interrupts(timer16_Sequence_t timer, volatile uint16_t
#else //!WIRING
// Interrupt handlers for Wiring
#if ENABLED(_useTimer1)
#ifdef _useTimer1
void Timer1Service() { handle_interrupts(_timer1, &TCNT1, &OCR1A); }
#endif
#if ENABLED(_useTimer3)
#ifdef _useTimer3
void Timer3Service() { handle_interrupts(_timer3, &TCNT3, &OCR3A); }
#endif
......@@ -133,7 +133,7 @@ static inline void handle_interrupts(timer16_Sequence_t timer, volatile uint16_t
static void initISR(timer16_Sequence_t timer) {
#if ENABLED(_useTimer1)
#ifdef _useTimer1
if (timer == _timer1) {
TCCR1A = 0; // normal counting mode
TCCR1B = _BV(CS11); // set prescaler of 8
......@@ -152,7 +152,7 @@ static void initISR(timer16_Sequence_t timer) {
}
#endif
#if ENABLED(_useTimer3)
#ifdef _useTimer3
if (timer == _timer3) {
TCCR3A = 0; // normal counting mode
TCCR3B = _BV(CS31); // set prescaler of 8
......@@ -170,7 +170,7 @@ static void initISR(timer16_Sequence_t timer) {
}
#endif
#if ENABLED(_useTimer4)
#ifdef _useTimer4
if (timer == _timer4) {
TCCR4A = 0; // normal counting mode
TCCR4B = _BV(CS41); // set prescaler of 8
......@@ -180,7 +180,7 @@ static void initISR(timer16_Sequence_t timer) {
}
#endif
#if ENABLED(_useTimer5)
#ifdef _useTimer5
if (timer == _timer5) {
TCCR5A = 0; // normal counting mode
TCCR5B = _BV(CS51); // set prescaler of 8
......@@ -307,7 +307,7 @@ bool Servo::attached() { return servo_info[this->servoIndex].Pin.isActive; }
void Servo::move(int value) {
if (this->attach(0) >= 0) {
this->write(value);
#ifdef DEACTIVATE_SERVOS_AFTER_MOVE
#if ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE)
delay(SERVO_DEACTIVATION_DELAY);
this->detach();
#endif
......
MarlinKimbra/stepper.cpp
View file @ 70821c6d
......@@ -262,7 +262,7 @@ void checkHitEndstops() {
ECHO_MV(MSG_ENDSTOP_Z, (float)endstops_trigsteps[Z_AXIS] / axis_steps_per_unit[Z_AXIS]);
LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT MSG_ENDSTOP_ZS);
}
#ifdef Z_PROBE_ENDSTOP
#if ENABLED(Z_PROBE_ENDSTOP)
if (endstop_hit_bits & BIT(Z_PROBE)) {
ECHO_MV(MSG_ENDSTOP_ZPS, (float)endstops_trigsteps[Z_AXIS] / axis_steps_per_unit[Z_AXIS]);
LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT MSG_ENDSTOP_ZPS);
......@@ -603,7 +603,7 @@ ISR(TIMER1_COMPA_vect) {
if (cleaning_buffer_counter) {
current_block = NULL;
plan_discard_current_block();
#ifdef SD_FINISHED_RELEASECOMMAND
#if ENABLED(SD_FINISHED_RELEASECOMMAND)
if ((cleaning_buffer_counter == 1) && (SD_FINISHED_STEPPERRELEASE)) enqueuecommands_P(PSTR(SD_FINISHED_RELEASECOMMAND));
#endif
cleaning_buffer_counter--;
......@@ -669,7 +669,7 @@ ISR(TIMER1_COMPA_vect) {
STEP_START(x,X);
STEP_START(y,Y);
STEP_START(z,Z);
#ifndef ADVANCE
#if DISABLED(ADVANCE)
STEP_START(e,E);
#endif
......@@ -1251,7 +1251,7 @@ void digipot_init() {
digipot_current(i,digipot_motor_current[i]);
}
#endif
#ifdef MOTOR_CURRENT_PWM_XY_PIN
#if ENABLED(MOTOR_CURRENT_PWM_XY_PIN)
pinMode(MOTOR_CURRENT_PWM_XY_PIN, OUTPUT);
pinMode(MOTOR_CURRENT_PWM_Z_PIN, OUTPUT);
pinMode(MOTOR_CURRENT_PWM_E_PIN, OUTPUT);
......@@ -1277,7 +1277,7 @@ void digipot_current(uint8_t driver, int current) {
const uint8_t digipot_ch[] = DIGIPOT_CHANNELS;
digitalPotWrite(digipot_ch[driver], current);
#endif
#ifdef MOTOR_CURRENT_PWM_XY_PIN
#if ENABLED(MOTOR_CURRENT_PWM_XY_PIN)
switch(driver) {
case 0: analogWrite(MOTOR_CURRENT_PWM_XY_PIN, 255L * current / MOTOR_CURRENT_PWM_RANGE); break;
case 1: analogWrite(MOTOR_CURRENT_PWM_Z_PIN, 255L * current / MOTOR_CURRENT_PWM_RANGE); break;
......
MarlinKimbra/stepper.h
View file @ 70821c6d
......@@ -37,7 +37,7 @@
#define NORM_E_DIR() { if(current_block->active_driver == 2) { E2_DIR_WRITE(!INVERT_E2_DIR); } else { if(current_block->active_driver == 1) { E1_DIR_WRITE(!INVERT_E1_DIR); } else { E0_DIR_WRITE(!INVERT_E0_DIR); }}}
#define REV_E_DIR() { if(current_block->active_driver == 2) { E2_DIR_WRITE(INVERT_E2_DIR); } else { if(current_block->active_driver == 1) { E1_DIR_WRITE(INVERT_E1_DIR); } else { E0_DIR_WRITE(INVERT_E0_DIR); }}}
#elif DRIVER_EXTRUDERS > 1
#ifndef DUAL_X_CARRIAGE
#if DISABLED(DUAL_X_CARRIAGE)
#define E_STEP_WRITE(v) { if(current_block->active_driver == 1) { E1_STEP_WRITE(v); } else { E0_STEP_WRITE(v); }}
#define NORM_E_DIR() { if(current_block->active_driver == 1) { E1_DIR_WRITE(!INVERT_E1_DIR); } else { E0_DIR_WRITE(!INVERT_E0_DIR); }}
#define REV_E_DIR() { if(current_block->active_driver == 1) { E1_DIR_WRITE(INVERT_E1_DIR); } else { E0_DIR_WRITE(INVERT_E0_DIR); }}
......
MarlinKimbra/temperature.cpp
View file @ 70821c6d
......@@ -30,7 +30,7 @@
//================================== macros =================================
//===========================================================================
#ifdef K1 // Defined in Configuration.h in the PID settings
#if ENABLED(K1) // Defined in Configuration.h in the PID settings
#define K2 (1.0 - K1)
#endif
......@@ -154,10 +154,10 @@ static int minttemp_raw[HOTENDS] = ARRAY_BY_HOTENDS( HEATER_0_RAW_LO_TEMP , HEAT
static int maxttemp_raw[HOTENDS] = ARRAY_BY_HOTENDS( HEATER_0_RAW_HI_TEMP , HEATER_1_RAW_HI_TEMP , HEATER_2_RAW_HI_TEMP, HEATER_3_RAW_HI_TEMP);
static int minttemp[HOTENDS] = { 0 };
static int maxttemp[HOTENDS] = ARRAY_BY_HOTENDS1( 16383 );
#ifdef BED_MINTEMP
#if ENABLED(BED_MINTEMP)
static int bed_minttemp_raw = HEATER_BED_RAW_LO_TEMP;
#endif
#ifdef BED_MAXTEMP
#if ENABLED(BED_MAXTEMP)
static int bed_maxttemp_raw = HEATER_BED_RAW_HI_TEMP;
#endif
......@@ -173,12 +173,12 @@ static float analog2temp(int raw, uint8_t e);
static float analog2tempBed(int raw);
static void updateTemperaturesFromRawValues();
#ifdef THERMAL_PROTECTION_HOTENDS
#if ENABLED(THERMAL_PROTECTION_HOTENDS)
int watch_target_temp[HOTENDS] = { 0 };
millis_t watch_heater_next_ms[HOTENDS] = { 0 };
#endif
#ifndef SOFT_PWM_SCALE
#if DISABLED(SOFT_PWM_SCALE)
#define SOFT_PWM_SCALE 0
#endif
......@@ -471,7 +471,7 @@ inline void _temp_error(int e, const char *serial_msg, const char *lcd_msg) {
PS_PGM(serial_msg);
ECHO_M(MSG_STOPPED_HEATER);
if (e >= 0) ECHO_EV((int)e); else ECHO_EM(MSG_HEATER_BED);
#ifdef ULTRA_LCD
#if ENABLED(ULTRA_LCD)
lcd_setalertstatuspgm(lcd_msg);
#endif
}
......@@ -775,7 +775,7 @@ static float analog2tempBed(int raw) {
if (i == BEDTEMPTABLE_LEN) celsius = PGM_RD_W(BEDTEMPTABLE[i-1][1]);
return celsius;
#elif defined BED_USES_AD595
#elif ENABLED(BED_USES_AD595)
return ((raw * ((5.0 * 100.0) / 1024.0) / OVERSAMPLENR) * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET;
#else
return 0;
......@@ -1049,38 +1049,38 @@ void tp_init() {
maxttemp_raw[NR] += OVERSAMPLENR; \
}
#ifdef HEATER_0_MINTEMP
#if ENABLED(HEATER_0_MINTEMP)
TEMP_MIN_ROUTINE(0);
#endif
#ifdef HEATER_0_MAXTEMP
#if ENABLED(HEATER_0_MAXTEMP)
TEMP_MAX_ROUTINE(0);
#endif
#if HOTENDS > 1
#ifdef HEATER_1_MINTEMP
#if ENABLED(HEATER_1_MINTEMP)
TEMP_MIN_ROUTINE(1);
#endif
#ifdef HEATER_1_MAXTEMP
#if ENABLED(HEATER_1_MAXTEMP)
TEMP_MAX_ROUTINE(1);
#endif
#if HOTENDS > 2
#ifdef HEATER_2_MINTEMP
#if ENABLED(HEATER_2_MINTEMP)
TEMP_MIN_ROUTINE(2);
#endif
#ifdef HEATER_2_MAXTEMP
#if ENABLED(HEATER_2_MAXTEMP)
TEMP_MAX_ROUTINE(2);
#endif
#if HOTENDS > 3
#ifdef HEATER_3_MINTEMP
#if ENABLED(HEATER_3_MINTEMP)
TEMP_MIN_ROUTINE(3);
#endif
#ifdef HEATER_3_MAXTEMP
#if ENABLED(HEATER_3_MAXTEMP)
TEMP_MAX_ROUTINE(3);
#endif
#endif // HOTENDS > 3
#endif // HOTENDS > 2
#endif // HOTENDS > 1
#ifdef BED_MINTEMP
#if ENABLED(BED_MINTEMP)
while(analog2tempBed(bed_minttemp_raw) < BED_MINTEMP) {
#if HEATER_BED_RAW_LO_TEMP < HEATER_BED_RAW_HI_TEMP
bed_minttemp_raw += OVERSAMPLENR;
......@@ -1089,7 +1089,7 @@ void tp_init() {
#endif
}
#endif //BED_MINTEMP
#ifdef BED_MAXTEMP
#if ENABLED(BED_MAXTEMP)
while(analog2tempBed(bed_maxttemp_raw) > BED_MAXTEMP) {
#if HEATER_BED_RAW_LO_TEMP < HEATER_BED_RAW_HI_TEMP
bed_maxttemp_raw -= OVERSAMPLENR;
......@@ -1471,7 +1471,7 @@ ISR(TIMER0_COMPB_vect) {
*
* for heaters drived by relay
*/
#ifndef MIN_STATE_TIME
#if DISABLED(MIN_STATE_TIME)
#define MIN_STATE_TIME 16 // MIN_STATE_TIME * 65.5 = time in milliseconds
#endif
......
MarlinKimbra/temperature.h
View file @ 70821c6d
......@@ -97,7 +97,7 @@ extern float current_temperature_bed;
FORCE_INLINE float degHotend(uint8_t hotend) { return current_temperature[HOTEND_ARG]; }
FORCE_INLINE float degBed() { return current_temperature_bed; }
#ifdef SHOW_TEMP_ADC_VALUES
#if ENABLED(SHOW_TEMP_ADC_VALUES)
FORCE_INLINE float rawHotendTemp(uint8_t hotend) { return current_temperature_raw[HOTEND_ARG]; }
FORCE_INLINE float rawBedTemp() { return current_temperature_bed_raw; }
#endif
......@@ -105,7 +105,7 @@ FORCE_INLINE float degBed() { return current_temperature_bed; }
FORCE_INLINE float degTargetHotend(uint8_t hotend) { return target_temperature[HOTEND_ARG]; }
FORCE_INLINE float degTargetBed() { return target_temperature_bed; }
#ifdef THERMAL_PROTECTION_HOTENDS
#if ENABLED(THERMAL_PROTECTION_HOTENDS)
void start_watching_heater(int e=0);
#endif
......
MarlinKimbra/thermistortables.h
View file @ 70821c6d
This diff is collapsed.
MarlinKimbra/ultralcd.cpp
View file @ 70821c6d
......@@ -118,17 +118,17 @@ static void lcd_status_screen();
#define ENCODER_FEEDRATE_DEADZONE 10
#if DISABLED(LCD_I2C_VIKI)
#ifndef ENCODER_STEPS_PER_MENU_ITEM
#if DISABLED(ENCODER_STEPS_PER_MENU_ITEM)
#define ENCODER_STEPS_PER_MENU_ITEM 5
#endif
#ifndef ENCODER_PULSES_PER_STEP
#if DISABLED(ENCODER_PULSES_PER_STEP)
#define ENCODER_PULSES_PER_STEP 1
#endif
#else
#ifndef ENCODER_STEPS_PER_MENU_ITEM
#if DISABLED(ENCODER_STEPS_PER_MENU_ITEM)
#define ENCODER_STEPS_PER_MENU_ITEM 2 // VIKI LCD rotary encoder uses a different number of steps per rotation
#endif
#ifndef ENCODER_PULSES_PER_STEP
#if DISABLED(ENCODER_PULSES_PER_STEP)
#define ENCODER_PULSES_PER_STEP 1
#endif
#endif
......@@ -139,7 +139,7 @@ static void lcd_status_screen();
/**
* START_MENU generates the init code for a menu function
*/
#if defined(BTN_BACK) && BTN_BACK > 0
#if ENABLED(BTN_BACK) && BTN_BACK > 0
#define START_MENU(last_menu) do { \
encoderRateMultiplierEnabled = false; \
if (encoderPosition > 0x8000) encoderPosition = 0; \
......@@ -308,7 +308,7 @@ static void lcd_status_screen() {
#if ENABLED(LCD_PROGRESS_BAR)
millis_t ms = millis();
#ifndef PROGRESS_MSG_ONCE
#if DISABLED(ROGRESS_MSG_ONCE)
if (ms > progress_bar_ms + PROGRESS_BAR_MSG_TIME + PROGRESS_BAR_BAR_TIME) {
progress_bar_ms = ms;
}
......@@ -1560,23 +1560,23 @@ void lcd_quick_feedback() {
next_button_update_ms = millis() + 500;
#if ENABLED(LCD_USE_I2C_BUZZER)
#ifndef LCD_FEEDBACK_FREQUENCY_HZ
#if DISABLED(LCD_FEEDBACK_FREQUENCY_HZ)
#define LCD_FEEDBACK_FREQUENCY_HZ 100
#endif
#ifndef LCD_FEEDBACK_FREQUENCY_DURATION_MS
#if DISABLED(LCD_FEEDBACK_FREQUENCY_DURATION_MS)
#define LCD_FEEDBACK_FREQUENCY_DURATION_MS (1000/6)
#endif
lcd.buzz(LCD_FEEDBACK_FREQUENCY_DURATION_MS, LCD_FEEDBACK_FREQUENCY_HZ);
#elif PIN_EXISTS(BEEPER)
#ifndef LCD_FEEDBACK_FREQUENCY_HZ
#if DISABLED(LCD_FEEDBACK_FREQUENCY_HZ)
#define LCD_FEEDBACK_FREQUENCY_HZ 5000
#endif
#ifndef LCD_FEEDBACK_FREQUENCY_DURATION_MS
#if DISABLED(LCD_FEEDBACK_FREQUENCY_DURATION_MS)
#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
#endif
buzz(LCD_FEEDBACK_FREQUENCY_DURATION_MS, LCD_FEEDBACK_FREQUENCY_HZ);
#else
#ifndef LCD_FEEDBACK_FREQUENCY_DURATION_MS
#if DISABLED(LCD_FEEDBACK_FREQUENCY_DURATION_MS)
#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
#endif
delay(LCD_FEEDBACK_FREQUENCY_DURATION_MS);
......@@ -1638,7 +1638,7 @@ void lcd_init() {
#if ENABLED(SR_LCD_2W_NL) // Non latching 2 wire shift register
pinMode (SR_DATA_PIN, OUTPUT);
pinMode (SR_CLK_PIN, OUTPUT);
#elif defined(SHIFT_CLK)
#elif ENABLED(SHIFT_CLK)
pinMode(SHIFT_CLK,OUTPUT);
pinMode(SHIFT_LD,OUTPUT);
pinMode(SHIFT_EN,OUTPUT);
......@@ -1928,7 +1928,7 @@ void lcd_reset_alert_level() { lcd_status_message_level = 0; }
* These values are independent of which pins are used for EN_A and EN_B indications
* The rotary encoder part is also independent to the chipset used for the LCD
*/
#if defined(EN_A) && defined(EN_B)
#if ENABLED(EN_A) && ENABLED(EN_B)
#define encrot0 0
#define encrot1 2
#define encrot2 3
......@@ -1952,7 +1952,7 @@ void lcd_reset_alert_level() { lcd_status_message_level = 0; }
#if BTN_ENC > 0
millis_t ms = millis();
if (ms > next_button_update_ms && READ(BTN_ENC) == 0) newbutton |= EN_C;
#if defined(BTN_BACK) && BTN_BACK > 0
#if ENABLED(BTN_BACK) && BTN_BACK > 0
if (ms > next_button_update_ms && READ(BTN_BACK) == 0) newbutton |= EN_D;
#endif
#endif
......@@ -2620,7 +2620,7 @@ static void coordtoLCD() {
memset(buffer, 0, sizeof(buffer));
strcat(buffer, "X");
if (axis_known_position[X_AXIS]) {
#ifdef DELTA
#if MECH(DELTA)
valuetemp = ftostr30(current_position[X_AXIS]);
#else
valuetemp = ftostr3(current_position[X_AXIS]);
......@@ -2632,7 +2632,7 @@ static void coordtoLCD() {
strcat(buffer, " Y");
if (axis_known_position[Y_AXIS]) {
#ifdef DELTA
#if MECH(DELTA)
valuetemp = ftostr30(current_position[Y_AXIS]);
#else
valuetemp = ftostr3(current_position[Y_AXIS]);
......
MarlinKimbra/ultralcd.h
View file @ 70821c6d
......@@ -80,7 +80,7 @@
#define EN_A BIT(BLEN_A)
#define LCD_CLICKED (buttons&EN_C)
#if defined(BTN_BACK) && BTN_BACK > 0
#if ENABLED(BTN_BACK) && BTN_BACK > 0
#define EN_D BIT(BLEN_D)
#define LCD_BACK_CLICKED (buttons&EN_D)
#endif
......
MarlinKimbra/ultralcd_implementation_hitachi_HD44780.h
View file @ 70821c6d
......@@ -6,7 +6,7 @@
* When selecting the Russian language, a slightly different LCD implementation is used to handle UTF8 characters.
**/
//#ifndef REPRAPWORLD_KEYPAD
//#if DISABLED(REPRAPWORLD_KEYPAD)
// extern volatile uint8_t buttons; //the last checked buttons in a bit array.
//#else
extern volatile uint8_t buttons; //an extended version of the last checked buttons in a bit array.
......@@ -27,7 +27,7 @@
#define EN_B BIT(BLEN_B) // The two encoder pins are connected through BTN_EN1 and BTN_EN2
#define EN_A BIT(BLEN_A)
#if defined(BTN_ENC) && BTN_ENC > -1
#if ENABLED(BTN_ENC) && BTN_ENC > -1
// encoder click is directly connected
#define BLEN_C 2
#define EN_C BIT(BLEN_C)
......@@ -51,7 +51,7 @@
#define B_DW (BUTTON_DOWN<<B_I2C_BTN_OFFSET)
#define B_RI (BUTTON_RIGHT<<B_I2C_BTN_OFFSET)
#if defined(BTN_ENC) && BTN_ENC > -1
#if ENABLED(BTN_ENC) && BTN_ENC > -1
// the pause/stop/restart button is connected to BTN_ENC when used
#define B_ST (EN_C) // Map the pause/stop/resume button into its normalized functional name
#define LCD_CLICKED (buttons&(B_MI|B_RI|B_ST)) // pause/stop button also acts as click until we implement proper pause/stop.
......@@ -380,7 +380,7 @@ static void lcd_implementation_init(
#if ENABLED(LCD_I2C_TYPE_PCF8575)
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
#ifdef LCD_I2C_PIN_BL
#if ENABLED(LCD_I2C_PIN_BL)
lcd.setBacklightPin(LCD_I2C_PIN_BL, POSITIVE);
lcd.setBacklight(HIGH);
#endif
......@@ -554,7 +554,7 @@ static void lcd_implementation_status_screen() {
lcd.print('X');
if (axis_known_position[X_AXIS])
#ifdef DELTA
#if MECH(DELTA)
lcd.print(ftostr30(current_position[X_AXIS]));
#else
lcd.print(ftostr3(current_position[X_AXIS]));
......@@ -562,7 +562,7 @@ static void lcd_implementation_status_screen() {
else
lcd_printPGM(PSTR("---"));
#ifdef DELTA
#if MECH(DELTA)
lcd_printPGM(PSTR(" Y"));
if (axis_known_position[Y_AXIS])
lcd.print(ftostr30(current_position[Y_AXIS]));
......
MarlinKimbra/utf_mapper.h
View file @ 70821c6d
......@@ -141,7 +141,7 @@
}
else if (seen_c2){
d &= 0x3f;
#ifndef MAPPER_ONE_TO_ONE
#if DISABLED(MAPPER_ONE_TO_ONE)
HARDWARE_CHAR_OUT( (char) pgm_read_byte_near( utf_recode + d + ( utf_hi_char << 6 ) - 0x20 ) );
#else
HARDWARE_CHAR_OUT( (char) (0x80 + ( utf_hi_char << 6 ) + d) ) ;
......@@ -200,7 +200,7 @@
return 0;
} else if (seen_d5) {
d &= 0x3fu;
#ifndef MAPPER_ONE_TO_ONE
#if DISABLED(MAPPER_ONE_TO_ONE)
HARDWARE_CHAR_OUT( (char) pgm_read_byte_near( utf_recode + d + ( utf_hi_char << 6 ) - 0x20 ) );
#else
HARDWARE_CHAR_OUT( (char) (0xa0u + ( utf_hi_char << 6 ) + d ) ) ;
......@@ -230,7 +230,7 @@
return 0;
} else if ((seen_e3 == true) && (seen_82_83 == true)){
d &= 0x3f;
#ifndef MAPPER_ONE_TO_ONE
#if DISABLED(MAPPER_ONE_TO_ONE)
HARDWARE_CHAR_OUT( (char) pgm_read_byte_near( utf_recode + d + ( utf_hi_char << 6 ) - 0x20 ) );
#else
HARDWARE_CHAR_OUT( (char) (0x80 + ( utf_hi_char << 6 ) + d ) ) ;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment